Dalmatian's Definitions
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Cielab Color Space
Gernot Hoffmann CIELab Color Space Contents . Introduction 2 2. Formulas 4 3. Primaries and Matrices 0 4. Gamut Restrictions and Tests 5. Inverse Gamma Correction 2 6. CIE L*=50 3 7. NTSC L*=50 4 8. sRGB L*=/0/.../90/99 5 9. AdobeRGB L*=0/.../90 26 0. ProPhotoRGB L*=0/.../90 35 . 3D Views 44 2. Linear and Standard Nonlinear CIELab 47 3. Human Gamut in CIELab 48 4. Low Chromaticity 49 5. sRGB L*=50 with RGB Numbers 50 6. PostScript Kernels 5 7. Mapping CIELab to xyY 56 8. Number of Different Colors 59 9. HLS-Hue for sRGB in CIELab 60 20. References 62 1.1 Introduction CIE XYZ is an absolute color space (not device dependent). Each visible color has non-negative coordinates X,Y,Z. CIE xyY, the horseshoe diagram as shown below, is a perspective projection of XYZ coordinates onto a plane xy. The luminance is missing. CIELab is a nonlinear transformation of XYZ into coordinates L*,a*,b*. The gamut for any RGB color system is a triangle in the CIE xyY chromaticity diagram, here shown for the CIE primaries, the NTSC primaries, the Rec.709 primaries (which are also valid for sRGB and therefore for many PC monitors) and the non-physical working space ProPhotoRGB. The white points are individually defined for the color spaces. The CIELab color space was intended for equal perceptual differences for equal chan- ges in the coordinates L*,a* and b*. Color differences deltaE are defined as Euclidian distances in CIELab. This document shows color charts in CIELab for several RGB color spaces. -
Preparing Images for Delivery
TECHNICAL PAPER Preparing Images for Delivery TABLE OF CONTENTS So, you’ve done a great job for your client. You’ve created a nice image that you both 2 How to prepare RGB files for CMYK agree meets the requirements of the layout. Now what do you do? You deliver it (so you 4 Soft proofing and gamut warning can bill it!). But, in this digital age, how you prepare an image for delivery can make or 13 Final image sizing break the final reproduction. Guess who will get the blame if the image’s reproduction is less than satisfactory? Do you even need to guess? 15 Image sharpening 19 Converting to CMYK What should photographers do to ensure that their images reproduce well in print? 21 What about providing RGB files? Take some precautions and learn the lingo so you can communicate, because a lack of crystal-clear communication is at the root of most every problem on press. 24 The proof 26 Marking your territory It should be no surprise that knowing what the client needs is a requirement of pro- 27 File formats for delivery fessional photographers. But does that mean a photographer in the digital age must become a prepress expert? Kind of—if only to know exactly what to supply your clients. 32 Check list for file delivery 32 Additional resources There are two perfectly legitimate approaches to the problem of supplying digital files for reproduction. One approach is to supply RGB files, and the other is to take responsibility for supplying CMYK files. Either approach is valid, each with positives and negatives. -
Specification of Srgb
How to interpret the sRGB color space (specified in IEC 61966-2-1) for ICC profiles A. Key sRGB color space specifications (see IEC 61966-2-1 https://webstore.iec.ch/publication/6168 for more information). 1. Chromaticity co-ordinates of primaries: R: x = 0.64, y = 0.33, z = 0.03; G: x = 0.30, y = 0.60, z = 0.10; B: x = 0.15, y = 0.06, z = 0.79. Note: These are defined in ITU-R BT.709 (the television standard for HDTV capture). 2. Reference display‘Gamma’: Approximately 2.2 (see precise specification of color component transfer function below). 3. Reference display white point chromaticity: x = 0.3127, y = 0.3290, z = 0.3583 (equivalent to the chromaticity of CIE Illuminant D65). 4. Reference display white point luminance: 80 cd/m2 (includes veiling glare). Note: The reference display white point tristimulus values are: Xabs = 76.04, Yabs = 80, Zabs = 87.12. 5. Reference veiling glare luminance: 0.2 cd/m2 (this is the reference viewer-observed black point luminance). Note: The reference viewer-observed black point tristimulus values are assumed to be: Xabs = 0.1901, Yabs = 0.2, Zabs = 0.2178. These values are not specified in IEC 61966-2-1, and are an additional interpretation provided in this document. 6. Tristimulus value normalization: The CIE 1931 XYZ values are scaled from 0.0 to 1.0. Note: The following scaling equations can be used. These equations are not provided in IEC 61966-2-1, and are an additional interpretation provided in this document. 76.04 X abs 0.1901 XN = = 0.0125313 (Xabs – 0.1901) 80 76.04 0.1901 Yabs 0.2 YN = = 0.0125313 (Yabs – 0.2) 80 0.2 87.12 Zabs 0.2178 ZN = = 0.0125313 (Zabs – 0.2178) 80 87.12 0.2178 7. -
Computational RYB Color Model and Its Applications
IIEEJ Transactions on Image Electronics and Visual Computing Vol.5 No.2 (2017) -- Special Issue on Application-Based Image Processing Technologies -- Computational RYB Color Model and its Applications Junichi SUGITA† (Member), Tokiichiro TAKAHASHI†† (Member) †Tokyo Healthcare University, ††Tokyo Denki University/UEI Research <Summary> The red-yellow-blue (RYB) color model is a subtractive model based on pigment color mixing and is widely used in art education. In the RYB color model, red, yellow, and blue are defined as the primary colors. In this study, we apply this model to computers by formulating a conversion between the red-green-blue (RGB) and RYB color spaces. In addition, we present a class of compositing methods in the RYB color space. Moreover, we prescribe the appropriate uses of these compo- siting methods in different situations. By using RYB color compositing, paint-like compositing can be easily achieved. We also verified the effectiveness of our proposed method by using several experiments and demonstrated its application on the basis of RYB color compositing. Keywords: RYB, RGB, CMY(K), color model, color space, color compositing man perception system and computer displays, most com- 1. Introduction puter applications use the red-green-blue (RGB) color mod- Most people have had the experience of creating an arbi- el3); however, this model is not comprehensible for many trary color by mixing different color pigments on a palette or people who not trained in the RGB color model because of a canvas. The red-yellow-blue (RYB) color model proposed its use of additive color mixing. As shown in Fig. -
HD-SDI, HDMI, and Tempus Fugit
TECHNICALL Y SPEAKING... By Steve Somers, Vice President of Engineering HD-SDI, HDMI, and Tempus Fugit D-SDI (high definition serial digital interface) and HDMI (high definition multimedia interface) Hversion 1.3 are receiving considerable attention these days. “These days” really moved ahead rapidly now that I recall writing in this column on HD-SDI just one year ago. And, exactly two years ago the topic was DVI and HDMI. To be predictably trite, it seems like just yesterday. As with all things digital, there is much change and much to talk about. HD-SDI Redux difference channels suffice with one-half 372M spreads out the image information The HD-SDI is the 1.5 Gbps backbone the sample rate at 37.125 MHz, the ‘2s’ between the two channels to distribute of uncompressed high definition video in 4:2:2. This format is sufficient for high the data payload. Odd-numbered lines conveyance within the professional HD definition television. But, its robustness map to link A and even-numbered lines production environment. It’s been around and simplicity is pressing it into the higher map to link B. Table 1 indicates the since about 1996 and is quite literally the bandwidth demands of digital cinema and organization of 4:2:2, 4:4:4, and 4:4:4:4 savior of high definition interfacing and other uses like 12-bit, 4096 level signal data with respect to the available frame delivery at modest cost over medium-haul formats, refresh rates above 30 frames per rates. distances using RG-6 style video coax. -
Basics of Color Management
Application Notes Basics of Color Management Basics of Color Management ErgoSoft AG Moosgrabenstr. 13 CH-8595 Altnau, Switzerland © 2010 ErgoSoft AG, All rights reserved. The information contained in this manual is based on information available at the time of publication and is sub- ject to change without notice. Accuracy and completeness are not warranted or guaranteed. No part of this manual may be reproduced or transmitted in any form or by any means, including electronic me- dium or machine-readable form, without the expressed written permission of ErgoSoft AG. Brand or product names are trademarks of their respective holders. The ErgoSoft RIP is available in different editions. Therefore the description of available features in this document does not necessarily reflect the license details of your edition of the ErgoSoft RIP. For information on the features included in your edition of the ErgoSoft RIPs refer to the ErgoSoft homepage or contact your dealer. Rev. 1.1 Basics of Color Management i Contents Introduction ................................................................................................................................................................. 1 Color Spaces ................................................................................................................................................................ 1 Basics ........................................................................................................................................................................ 1 CMYK ....................................................................................................................................................................... -
Color Images, Color Spaces and Color Image Processing
color images, color spaces and color image processing Ole-Johan Skrede 08.03.2017 INF2310 - Digital Image Processing Department of Informatics The Faculty of Mathematics and Natural Sciences University of Oslo After original slides by Fritz Albregtsen today’s lecture ∙ Color, color vision and color detection ∙ Color spaces and color models ∙ Transitions between color spaces ∙ Color image display ∙ Look up tables for colors ∙ Color image printing ∙ Pseudocolors and fake colors ∙ Color image processing ∙ Sections in Gonzales & Woods: ∙ 6.1 Color Funcdamentals ∙ 6.2 Color Models ∙ 6.3 Pseudocolor Image Processing ∙ 6.4 Basics of Full-Color Image Processing ∙ 6.5.5 Histogram Processing ∙ 6.6 Smoothing and Sharpening ∙ 6.7 Image Segmentation Based on Color 1 motivation ∙ We can differentiate between thousands of colors ∙ Colors make it easy to distinguish objects ∙ Visually ∙ And digitally ∙ We need to: ∙ Know what color space to use for different tasks ∙ Transit between color spaces ∙ Store color images rationally and compactly ∙ Know techniques for color image printing 2 the color of the light from the sun spectral exitance The light from the sun can be modeled with the spectral exitance of a black surface (the radiant exitance of a surface per unit wavelength) 2πhc2 1 M(λ) = { } : λ5 hc − exp λkT 1 where ∙ h ≈ 6:626 070 04 × 10−34 m2 kg s−1 is the Planck constant. ∙ c = 299 792 458 m s−1 is the speed of light. ∙ λ [m] is the radiation wavelength. ∙ k ≈ 1:380 648 52 × 10−23 m2 kg s−2 K−1 is the Boltzmann constant. T ∙ [K] is the surface temperature of the radiating Figure 1: Spectral exitance of a black body surface for different body. -
Deep Learning-Based Color Holographic Microscopy
Deep learning-based color holographic microscopy Tairan Liu1,2,3†, Zhensong Wei1†, Yair Rivenson1,2,3†,*, Kevin de Haan1,2,3, Yibo Zhang1,2,3, Yichen Wu1,2,3, and Aydogan Ozcan1,2,3,4,* † Equally contributing authors * Corresponding authors: [email protected] ; [email protected] 1Electrical and Computer Engineering Department, University of California, Los Angeles, CA, 90095, USA. 2Bioengineering Department, University of California, Los Angeles, CA, 90095, USA. 3California NanoSystems Institute (CNSI), University of California, Los Angeles, CA, 90095, USA. 4Department of Surgery, David Geffen School of Medicine, University of California, Los Angeles, CA, 90095, USA. Abstract We report a framework based on a generative adversarial network (GAN) that performs high-fidelity color image reconstruction using a single hologram of a sample that is illuminated simultaneously by light at three different wavelengths. The trained network learns to eliminate missing-phase-related arti- facts, and generates an accurate color transformation for the reconstructed image. Our framework is ex- perimentally demonstrated using lung and prostate tissue sections that are labeled with different histo- logical stains. This framework is envisaged to be applicable to point-of-care histopathology, and pre- sents a significant improvement in the throughput of coherent microscopy systems given that only a sin- gle hologram of the specimen is required for accurate color imaging. 1. INTRODUCTION Histological staining of fixed, thin tissue sections mounted on glass slides is one of the fundamental steps required for the diagnoses of various medical conditions. Histological stains are used to highlight the constituent tissue parts by enhancing the colorimetric contrast of cells and subcellular components for microscopic inspection. -
14. Color Mapping
14. Color Mapping Jacobs University Visualization and Computer Graphics Lab Recall: RGB color model Jacobs University Visualization and Computer Graphics Lab Data Analytics 691 CMY color model • The CMY color model is related to the RGB color model. •Itsbasecolorsare –cyan(C) –magenta(M) –yellow(Y) • They are arranged in a 3D Cartesian coordinate system. • The scheme is subtractive. Jacobs University Visualization and Computer Graphics Lab Data Analytics 692 Subtractive color scheme • CMY color model is subtractive, i.e., adding colors makes the resulting color darker. • Application: color printers. • As it only works perfectly in theory, typically a black cartridge is added in practice (CMYK color model). Jacobs University Visualization and Computer Graphics Lab Data Analytics 693 CMY color cube • All colors c that can be generated are represented by the unit cube in the 3D Cartesian coordinate system. magenta blue red black grey white cyan yellow green Jacobs University Visualization and Computer Graphics Lab Data Analytics 694 CMY color cube Jacobs University Visualization and Computer Graphics Lab Data Analytics 695 CMY color model Jacobs University Visualization and Computer Graphics Lab Data Analytics 696 CMYK color model Jacobs University Visualization and Computer Graphics Lab Data Analytics 697 Conversion • RGB -> CMY: • CMY -> RGB: Jacobs University Visualization and Computer Graphics Lab Data Analytics 698 Conversion • CMY -> CMYK: • CMYK -> CMY: Jacobs University Visualization and Computer Graphics Lab Data Analytics 699 HSV color model • While RGB and CMY color models have their application in hardware implementations, the HSV color model is based on properties of human perception. • Its application is for human interfaces. Jacobs University Visualization and Computer Graphics Lab Data Analytics 700 HSV color model The HSV color model also consists of 3 channels: • H: When perceiving a color, we perceive the dominant wavelength. -
Rec. 709 Color Space
Standards, HDR, and Colorspace Alan C. Brawn Principal, Brawn Consulting Introduction • Lets begin with a true/false question: Are high dynamic range (HDR) and wide color gamut (WCG) the next big things in displays? • If you answered “true”, then you get a gold star! • The concept of HDR has been around for years, but this technology (combined with advances in content) is now available at the reseller of your choice. • Halfway through 2017, all major display manufacturers started bringing out both midrange and high-end displays that have high dynamic range capabilities. • Just as importantly, HDR content is becoming more common, with UHD Blu-Ray and streaming services like Netflix. • Are these technologies worth the market hype? • Lets spend the next hour or so and find out. Broadcast Standards Evolution of Broadcast - NTSC • The first NTSC (National Television Standards Committee) broadcast standard was developed in 1941, and had no provision for color. • In 1953, a second NTSC standard was adopted, which allowed for color television broadcasting. This was designed to be compatible with existing black-and-white receivers. • NTSC was the first widely adopted broadcast color system and remained dominant until the early 2000s, when it started to be replaced with different digital standards such as ATSC. Evolution of Broadcast - ATSC 1.0 • Advanced Television Systems Committee (ATSC) standards are a set of broadcast standards for digital television transmission over the air (OTA), replacing the analog NTSC standard. • The ATSC standards were developed in the early 1990s by the Grand Alliance, a consortium of electronics and telecommunications companies assembled to develop a specification for what is now known as HDTV. -
PRECISE COLOR COMMUNICATION COLOR CONTROL from PERCEPTION to INSTRUMENTATION Knowing Color
PRECISE COLOR COMMUNICATION COLOR CONTROL FROM PERCEPTION TO INSTRUMENTATION Knowing color. Knowing by color. In any environment, color attracts attention. An infinite number of colors surround us in our everyday lives. We all take color pretty much for granted, but it has a wide range of roles in our daily lives: not only does it influence our tastes in food and other purchases, the color of a person’s face can also tell us about that person’s health. Even though colors affect us so much and their importance continues to grow, our knowledge of color and its control is often insufficient, leading to a variety of problems in deciding product color or in business transactions involving color. Since judgement is often performed according to a person’s impression or experience, it is impossible for everyone to visually control color accurately using common, uniform standards. Is there a way in which we can express a given color* accurately, describe that color to another person, and have that person correctly reproduce the color we perceive? How can color communication between all fields of industry and study be performed smoothly? Clearly, we need more information and knowledge about color. *In this booklet, color will be used as referring to the color of an object. Contents PART I Why does an apple look red? ········································································································4 Human beings can perceive specific wavelengths as colors. ························································6 What color is this apple ? ··············································································································8 Two red balls. How would you describe the differences between their colors to someone? ·······0 Hue. Lightness. Saturation. The world of color is a mixture of these three attributes. -
Human Skin Detection Using RGB, HSV and Ycbcr Color Models
Human Skin Detection Using RGB, HSV and YCbCr Color Models S. Kolkur1, D. Kalbande2, P. Shimpi2, C. Bapat2, and J. Jatakia2 1 Department of Computer Engineering, Thadomal Shahani Engineering College, Bandra,Mumbai, India 2 Department of Computer Engineering, Sardar Patel Institute of Technology, Andheri,Mumbai, India { [email protected]; [email protected]; [email protected]; [email protected]; [email protected]} Abstract. Human Skin detection deals with the recognition of skin-colored pixels and regions in a given image. Skin color is often used in human skin detection because it is invariant to orientation and size and is fast to pro- cess. A new human skin detection algorithm is proposed in this paper. The three main parameters for recogniz- ing a skin pixel are RGB (Red, Green, Blue), HSV (Hue, Saturation, Value) and YCbCr (Luminance, Chromi- nance) color models. The objective of proposed algorithm is to improve the recognition of skin pixels in given images. The algorithm not only considers individual ranges of the three color parameters but also takes into ac- count combinational ranges which provide greater accuracy in recognizing the skin area in a given image. Keywords: Skin Detection, Color Models, Image Processing, Classifier 1 Introduction Skin detection is the process of finding skin-colored pixels and regions in an image or a video. This process is typically used as a preprocessing step to find regions that potentially have human faces and limbs in images [2]. Skin image recognition is used in a wide range of image processing applications like face recognition, skin dis- ease detection, gesture tracking and human-computer interaction [1].