DOCSLIB.ORG

LFI Gunsmith Price List Rev 3/9/2017

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
LFI Gunsmith Price List Rev 3/9/2017 Gunsmith Prices LFI Gunsmith Price List Rev 3/9/2017 Service Charge Per Hour/ Bench Time $50.00 Service Charge Per Hour/ Machine Time $60.00 Minimum Charge Per Gun $15.00 Cost Estimates Free Firearm Cleaning $25.00 to $100.00 Semi-Auto $45-$65 Bolt Action $50.00 Lever Action $100.00 Pistol (Striker Fire) $25-$50 Pistol (Hammer/Revolver) $40-$60 Sight Work Rifle/Pistol, Pistol sights, & Rifle optics purchased at LFI include Free install and laser bore sight on day of purchase Pistol Sight Install $15-$35 Scope Mounting - Includes mounting & laser bore sighting $35.00 Laser Bore Sight $20.00 Install Sight Ramps $25-$50 Sight In Firearm - Does not include cost of ammo or targets Hourly Rate Paint Sights $15.00 Drill & Tap Shotgun Receiver for Scope Base on most shotguns (Per $10.00 Hole) Drill, Tap, Mount Scope & Bore Sight on most shotguns ( scope base $60.00 not included ) Drill & Tap Barrel or Receiver For Sights (Per Hole) $10.00 Make Custom Front Sight - Based on time & materials Hourly Rate + Materials Install Front Or Mid Rib Sight Bead On Shotgun $20.00 Cut Dovetail - Standard $35.00 Cut Dovetail - Novack or Bo-Mar $65.00 General Firearm Work Check Head Space $25.00 Make Chamber Cast $50.00 Remove Fired Case From Chamber Hourly Rate Remove Live Round From Chamber $20.00 + Hourly Rate Remove Obstruction From Bore Hourly Rate Gunsmith Prices Remove Fouling And/Or Leading From Barrel Hourly Rate + Materials Cut & Crown Barrel - Most barrels $50.00 Making Springs Hourly Rate + Materials Trigger Install $35 Adjust Trigger $35-$45 Trigger Job - Smooth & lighten. Does not include price of spring kit or $65.00 + connector. Shotgun Work Please speak with gunsmith for prices and appraisals Hourly Rate + Materials Handgun Work Revolver Action Job $120.00 + Semi-Auto Action Job 1911 $120.00 Fit Barrel To 1911 Auto - Does not include the cost of new barrel. $40.00 Throat, Polish Barrel And Feed Ramp $40.00 Fit New Trigger To 1911 Auto - Does not include the cost of the new $40.00 trigger Fit Custom Hammer To 1911 - Does not include the cost of the new $20.00 hammer Modify 1911 Auto Frame For Beavertail Safety - Does not include the $40.00 cost of the new grip safety or refinishing Trigger Install $35 Rifle Work Rebarrel Rifle - Threaded, chambered & contoured barrel. Does not $75.00 include the cost of the barrel Thread Barrel $150.00 AR Upper Rebuild - Remove/Replace rail components, gas system, etc. $65.00 AR Lower Rebuild - Remove/Replace trigger group, buffer $65.00 components, grip, etc. Swap Similar Style Rail on AR - Free float for Free float or Two-piece $25.00 for Two-piece Trigger Install $35.00 Pin and weld muzzle brake $35.00 Welding On New Bolt Handle - Does not include cost of new bolt $50.00 handle, or any clearance cutting of receiver or stock. Stock Work Standard Finish - Wood is left unfilled $75.00 Gunsmith Prices Deluxe Finish - Wood is filled $150.00 Glass Bedding Barrel And/Or Action $80.00 Pillar Bed w/pillars $75.00 Install Recoil Pad or Plate $25.00 Install Adjustable Butt Plate $80.00 Install Sling Swivels Studs In Stock $15.00/ea Install Recoil Reducer - Requiring a hole to be drilled in the butt stock $40.00 Inletting & Finishing Of A Semi-Finished Stock $120.00 + Fit, Bed And Finish Fiberglass Stock $120.00 Fit Recoil Pad $35.00 Fix Cracked or Broken Stock $50.00.
Load more

Recommended publications
  • Study and Characterization of EN AW 6181/6082-T6 and EN AC
    metals Article Study and Characterization of EN AW 6181/6082-T6 and EN AC 42100-T6 Aluminum Alloy Welding of Structural Applications: Metal Inert Gas (MIG), Cold Metal Transfer (CMT), and Fiber Laser-MIG Hybrid Comparison Giovanna Cornacchia * and Silvia Cecchel DIMI, Department of Industrial and Mechanical Engineering, University of Brescia, via Branze 38, 25123 Brescia, Italy; [email protected] * Correspondence: [email protected]; Tel.: +39-030-371-5827; Fax: +39-030-370-2448 Received: 18 February 2020; Accepted: 26 March 2020; Published: 27 March 2020 Abstract: The present research investigates the effects of different welding techniques, namely traditional metal inert gas (MIG), cold metal transfer (CMT), and fiber laser-MIG hybrid, on the microstructural and mechanical properties of joints between extruded EN AW 6181/6082-T6 and cast EN AC 42100-T6 aluminum alloys. These types of weld are very interesting for junctions of Al-alloys parts in the transportation field to promote the lightweight of a large scale chassis. The weld joints were characterized through various metallurgical methods including optical microscopy and hardness measurements to assess their microstructure and to individuate the nature of the intermetallics, their morphology, and distribution. The results allowed for the evaluation of the discrepancies between the welding technologies (MIG, CMT, fiber laser) on different aluminum alloys that represent an exhaustive range of possible joints of a frame. For this reason, both simple bar samples and real junctions of a prototype frame of a sports car were studied and, compared where possible. The study demonstrated the higher quality of innovative CMT and fiber laser-MIG hybrid welding than traditional MIG and the comparison between casting and extrusion techniques provide some inputs for future developments in the automotive field.
    [Show full text]
  • General Gunsmith Tools 421-461
    GRACE USA GENERAL GUNSMITH TOOLS GENERAL GUNSMITH TOOLS INDEX 17 PIECE TOOL SET PLUS Action Proving Dummies .......... 457 Drill Bits .................... 446-447 Rotary Tools ................. 445-446 BENCH BLOCK Action Wrenches ............. 451-452 Hammers ................... 429-430 Saws/Files ................... 438-441 Contains Tools Necessary For Quick Repairs In The Field Ammunition Tools ................ 430 Headspace Gauges ........... 456-457 Scope Mounting Tools ........ 459-460 Handy tool set contains everything Barrel Vises ................. 452-453 Inspection Tools ............. 442-443 Screw Extractors ................. 447 you need to perform quick repairs on your guns. Kit includes: (8) fixed blade screw- Basic Tool Kits ................ 421-423 Lathe Bits/End Mills ........... 450-451 Screwdrivers ................ 431-437 drivers with parallel ground tips to fit most gun screws, (8) brass punches, and an 8 Bench Blocks .................... 425 Machining Accessories ........ 449-450 Stones & Trigger Jigs ......... 443-445 ounce brass hammer. Punches are made 5 1 3 1 5 3 7 1 of /16” brass hex stock and come in /16", /32", /8", /32", /16", /32", /4", 5 Bench Mats ................. 424-425 Measuring Instruments ........ 441-442 Taps & Dies ................. 447-449 and /16" diameter. Kit comes with a neoprene base to keep tools organized, but also serves as a functional bench block. Neoprene Boresighters ................. 460-461 Picks/Hooks/Scribes ............... 441 Trigger Pull Gauges ............... 451 base can also
    [Show full text]
  • Welding on the Farm: Selecting a Welding Unit for the Farm Or Ranch
    Welding on the Farm: Selecting a Welding Unit for the Farm or Ranch Farms encounter a wide variety of welding repairs and projects – having the right welder depends on a lot of factors. Do you have to bring the welder to the work or can you take the work to the welder? Which process (MIG, Stick, or TIG) fits your needs? This article examines all these issues and more. The weather finally cleared, and Wisconsin dairy farmer Al Hoffmann has 385 acres of haylage to cut and store when the chopper blower band for the silo snaps in half. Part of the 3/16 in. steel band has worn paper thin and snapped, and on this Saturday, the nearest replacement band is two days away. Using a 200 amp Millermatic® wire welder, Al saves the band by tack welding it together and then welding on a back-up strip of steel. The repaired chopper blower moves more than 800 tons of haylage in the next few days... ...It's evening milking time. Al is half done with his 185 cows when a hinge breaks on the air gate in the milking parlor. Al resumes milking a few minutes later, after he repairs the gate with a portable Millermatic wire welder that runs off his 115 V household current. "This farm has a lot of old iron, but welders keep my machinery running," Al says. In addition to the two wire welders, Al also uses a 175 amp Stick (shielded metal arc) welder, primarily for hardfacing the bucket on his skid loader or repairing his manure spreader.
    [Show full text]
  • Small Enterprise Manufacturing Support Programme [Semsp]
    SMALL ENTERPRISE MANUFACTURING SUPPORT PROGRAMME [SEMSP] #BuyLocalBuyMadeInSA This scheme/fund is targeted at township and rural area-based entrepreneurs with a consideration for small-scale manufacturers located in cities. 1. PURPOSE a. To provide financial and business development support to small enterprises in the manufacturing industry sub-sectors b. To provide infrastructure to small enterprises in the manufacturing industry sub- sectors c. To provide market access opportunities to small enterprises (public and private sectors) d. To facilitate aggregate input costs for raw materials e. To prioritise manufacturing industry sub-sectors with good job creation potential, namely: furniture manufacturing metal and steel manufacturing chemical manufacturing agro-processing f. To contribute to the resuscitation of township and rural economies 2. SCOPE OF THE SEMSP a. The programme will be applicable to all the manufacturing industry sub-sectors, but will priorities furniture manufacturing, metal and steel manufacturing, petroleum & chemical manufacturing as well as food and beverages manufacturing (agro- processing). b. The programme will support the following categories of small enterprises that must be operating in townships and rural areas: c. Furniture manufacturers, including coffin makers. d. Manufacturers and suppliers of iron and steel products (steel erector, welder, boilermaker, pipefitter, millwright, blacksmith, gunsmith). e. Manufacturers of sanitizers, disinfectants, water, recycling, paints, oils, and related products.
    [Show full text]
  • Boilermaker B2
    BOILERMAKER B2 AWS E8018-B2 H4R WELDING POSITIONS: FEATURES: BENEFITS: • Good arc characteristics • Stable easy to control arc, x-ray clear welds • Low spatter level • Improved weld bead appearance, less clean-up • Quick, easy slag removal • No slag inclusions, increased welding efficiency • Low moisture absorption • Reduces chance of starting porosity • Low hydrogen less than 4 ml/100 g • Resistant to hydrogen induced cracking APPLICATIONS: • Boilers • Tubing TYPE OF CURRENT: Direct Current Electrode Positive (DCEP) or AC RECOMMENDED WELDING TECHNIQUES: ENERAL Electrode positive, work negative (DCEP) or AC G : RC ENGTH Very short arc A L : LAT Angle electrode 10°-15° from 90° F : ERTICAL P Use weaving techniques V -U : ERTICAL OWN Not recommended V -D : OVERHEAD: Use slight weaving motion within the puddle STORAGE: After opening, store in holding oven (220°F to 350°F) until used. RECONDITIONING If exposed to atmosphere for extended periods, reconditioned for one (1) hour at 600°F. TYPICAL WELD METAL PROPERTIES* (Chem Pad): Weld Metal Analysis (%) AWS Spec Carbon (C) 0.05 0.12 max Manganese (Mn) 0.68 0.90 max Sulphur (S) 0.01 0.03 max Phosphorus (P) 0.01 0.03 max Silicon (Si) 0.36 0.80 max Chromium (Cr) 1.12 1.00 - 1.50 Molybdenum (Mo) 0.40 0.40 - 0.65 TYPICAL MECHANICAL PROPERTIES* (As Welded): Stress relieved 1 hr. @ 1275°F AWS Spec Tensile Strength 98,000 psi (673 MPa) 80,000 psi Yield Strength 86,000 psi (592 MPa) 67,000 psi Elongation % in 2” 23% 19% TYPICAL CHARPY V-NOTCH IMPACT VALUES* (As Welded): Stress relieved 1 hr.
    [Show full text]
  • Gunsmithing Technology Tool List
    GUNSMITHING TECHNOLOGY TOOL LIST RIFLESMITHING AND BARRELING AND CHAMBERING COURSES REQUIRE THE STUDENT TO PROVIDE A BOLT ACTION RIFLE THAT WILL BE REBARRELED AND CUSTOMIZED, 1 FIREARM CAN BE USED FOR BOTH CLASSES AS WELL AS ACCESSORIES INSTALLATION, 1 PIECE STOCKMAKING, AND REFINISHING FOR A MASTER FIREARM PROJECT. ADDITIONAL PARTS AND ACCESSORIES WILL ALSO NEED TO BE PURCHASED AT TIME OF THESE CLASSES. SEE COURSE INSTRUCTOR OR SYLLABUS FOR CURRENT LISTS AND DETAILS. SHOTGUNSMITHING REQUIRES THE STUDENT TO PROVIDE A SHOTGUN THAT WILL BE MODIFIED AND CUSTOMIZED, THE FIREARM CAN BE USED FOR ACCESSORIES INSTALLATION, 2 PIECE STOCKMAKING, AND REFINISHING FOR A MASTER FIREARM PROJECT. ADDITIONAL PARTS AND ACCESSORIES WILL ALSO NEED TO BE PURCHASED AT TIME OF THESE CLASSES. SEE COURSE INSTRUCTOR OR SYLLABUS FOR CURRENT LISTS AND DETAILS. SUPPLIERS This is not an exclusive list of suppliers, manufacturers, or part numbers, these are parts and vendors that we have relationships with. Also check online; Amazon, eBay, Google, and local second hand stores or pawn shops. Check for student discounts and compare products, part numbers subject to change at any time. Brownell’s 1-800-741-0085 www.brownells.com Jack First 1-605-343-9544 www.jack-first-gun-parts.myshopify.com MidwayUSA 1-800-243-3220 www.midwayusa.com MSC Industrial Direct 1-800-645-7270 www.mscdirect.com Oxygen Service Co 1-800-774-1336 www.oxygenservicecompany.com Wood Workers Supply 1-800-645-9292 www.woodworker.com Track of the Wolf 1-763-633-2500 www.trackofthewolf.com Fastenal 1-877-507-7555
    [Show full text]
  • Weld Quality in Aluminium Alloys
    Q14003 Examensarbete 30 hp Maj 2014 Weld Quality in Aluminium Alloys Rujira Deekhunthod Abstract Weld Quality in Aluminium Alloys Rujira Deekhunthod Teknisk- naturvetenskaplig fakultet UTH-enheten The aims of this project are to present an understanding in what happens when aluminium-(Al) alloys are welded, and to investigate how the Mg-, Si- and Cr-contents Besöksadress: in AA6005A influence the weld strength and cracking susceptibility. Ångströmlaboratoriet Lägerhyddsvägen 1 It is known that heat from welding affects the mechanical properties (strength) of the Hus 4, Plan 0 material. Different heat cycles during welding are one of the main reasons that the strength varies. Welding can cause various phenomena such as decreased strength, Postadress: porosity, deformation, cracks and corrosion. To minimize these phenomena one has Box 536 751 21 Uppsala to have a balance between the welding parameters, alloy composition and welding fixture setup. Al alloys are sensitive to heat from welding because they have high heat Telefon: conductivity and high thermal expansion coefficient. They also deform easily when the 018 – 471 30 03 material is heated locally. If the material is deformed too much then cracking easily Telefax: occurs. 018 – 471 30 00 This project has examined how the Mg-, Si- and Cr-contents in AA6005A, affect the welded material. A V-joint with MIG welding is used for producing weld samples. For Hemsida: evaluation Vickers micro-hardness, tensile testing, radiography (X-ray), LOM and SEM http://www.teknat.uu.se/student with EBSD and EDS was used. The evaluation focuses on mechanical properties and microstructure. The results show that small variations of Mg-, Si- and Cr-content do not have any clear effects on the welded material.
    [Show full text]
  • Welding of Aluminum Alloys
    4 Welding of Aluminum Alloys R.R. Ambriz and V. Mayagoitia Instituto Politécnico Nacional CIITEC-IPN, Cerrada de Cecati S/N Col. Sta. Catarina C.P. 02250, Azcapotzalco, DF, México 1. Introduction Welding processes are essential for the manufacture of a wide variety of products, such as: frames, pressure vessels, automotive components and any product which have to be produced by welding. However, welding operations are generally expensive, require a considerable investment of time and they have to establish the appropriate welding conditions, in order to obtain an appropriate performance of the welded joint. There are a lot of welding processes, which are employed as a function of the material, the geometric characteristics of the materials, the grade of sanity desired and the application type (manual, semi-automatic or automatic). The following describes some of the most widely used welding process for aluminum alloys. 1.1 Shielded metal arc welding (SMAW) This is a welding process that melts and joins metals by means of heat. The heat is produced by an electric arc generated by the electrode and the materials. The stability of the arc is obtained by means of a distance between the electrode and the material, named stick welding. Figure 1 shows a schematic representation of the process. The electrode-holder is connected to one terminal of the power source by a welding cable. A second cable is connected to the other terminal, as is presented in Figure 1a. Depending on the connection, is possible to obtain a direct polarity (Direct Current Electrode Negative, DCEN) or reverse polarity (Direct Current Electrode Positive, DCEP).
    [Show full text]
  • Boilermaking Manual. INSTITUTION British Columbia Dept
    DOCUMENT RESUME ED 246 301 CE 039 364 TITLE Boilermaking Manual. INSTITUTION British Columbia Dept. of Education, Victoria. REPORT NO ISBN-0-7718-8254-8. PUB DATE [82] NOTE 381p.; Developed in cooperation with the 1pprenticeship Training Programs Branch, Ministry of Labour. Photographs may not reproduce well. AVAILABLE FROMPublication Services Branch, Ministry of Education, 878 Viewfield Road, Victoria, BC V9A 4V1 ($10.00). PUB TYPE Guides Classroom Use - Materials (For Learner) (OW EARS PRICE MFOI Plus Postage. PC Not Available from EARS. DESCRIPTORS Apprenticeships; Blue Collar Occupations; Blueprints; *Construction (Process); Construction Materials; Drafting; Foreign Countries; Hand Tools; Industrial Personnel; *Industrial Training; Inplant Programs; Machine Tools; Mathematical Applications; *Mechanical Skills; Metal Industry; Metals; Metal Working; *On the Job Training; Postsecondary Education; Power Technology; Quality Control; Safety; *Sheet Metal Work; Skilled Occupations; Skilled Workers; Trade and Industrial Education; Trainees; Welding IDENTIFIERS *Boilermakers; *Boilers; British Columbia ABSTRACT This manual is intended (I) to provide an information resource to supplement the formal training program for boilermaker apprentices; (2) to assist the journeyworker to build on present knowledge to increase expertise and qualify for formal accreditation in the boilermaking trade; and (3) to serve as an on-the-job reference with sound, up-to-date guidelines for all aspects of the trade. The manual is organized into 13 chapters that cover the following topics: safety; boilermaker tools; mathematics; material, blueprint reading and sketching; layout; boilershop fabrication; rigging and erection; welding; quality control and inspection; boilers; dust collection systems; tanks and stacks; and hydro-electric power development. Each chapter contains an introduction and information about the topic, illustrated with charts, line drawings, and photographs.
    [Show full text]
  • Monte Carlo Stock
    Gun Stocks STOCK DESIGN AND STOCK STYLE Types of Gun Stocks A gunsmith requires a basic understanding of stock function prior to becoming a stock maker. A rifle stock, in function, is nothing more than a segment of wood, fiberglass, plastic, or other material shaped to support the rifle’s barrel and action. It also functions to conform to the shooter’s body so the shooter can control the firearm. That’s the mechanical side of it. However, arms lovers the world over consider a stock much more than a mechanical device. They think of a gun stock as a work of art and function (Figure 1). As a prospec- tive gunsmith, we hope this is your position. FIGURE 1—Notice the attractive oak-leaf pattern on this Bishop-III stock. (Photo courtesy of Reinhart Fajen, Inc.) Stocks can be built in a multitude of styles with a stock shape to fit everyone. Even factory rifles come in a wide variety of stock styles. Factory stocks, incidentally, have come a long way and can be considered quite good today, although cer- tainly not in the realm of a custom-made stock. Figure 2 shows a gun stock labeled with its proper nomenclature. 1 FIGURE 2—Become familiar with the names of the parts of a gun stock. Early Stock Design Turning the pages of gun history to an earlier time reveals that the first stocks well known to American shooters had a great deal to do with contemporary stock designs. However, such muzzleloader stocks left a lot to be desired.
    [Show full text]
  • Welding Schedules for Stainless Steel
    APPLICATION DATA SHEET Phone: 800-933-6779 Fax:205-663-3221 Email:[email protected] SCHEDULE FOR SPOT WELDING STAINLESS STEEL ELECTRODE DIAMETER MINIMUM MINIMUM DIAMETER AND SHAPE CONTACTING WELD OF THICKNESS (See Note 5) WELDING OVERLAP SPACING FUSED MINIMUM SHEAR STRENGTH “T” of CURRENT (See Note ZONE THINNEST (Approx.) 6 Below) LB. OUTSIDE PIECE WELD AMPS Ultimate Tensile Strength of Metal (See Notes TIME 1, 2, 3 and 4 ELECTRODE Tensile Tensile 70000 90000 150000 Below) FORCE CYCLES Strength Strength Up to Up to Psi D, IN., d, IN., (60 Below 150000 Psi IN. 90000 150000 and INCHES Min. Max. LB. Per Sec.) 150000 Psi and Higher IN. IN. Approx. Psi Psi Higher 0.006 3/16 3/32 180 2 2000 2000 3/16 3/16 0.045 60 70 85 0.008 3/16 3/32 200 3 2000 2000 3/16 3/16 0.065 150 170 210 0.012 1/4 1/8 260 3 2100 2000 1/4 1/4 0.076 185 210 250 0.014 1/4 1/8 300 4 2500 2200 1/4 1/4 0.082 240 250 320 0.016 1/4 1/8 330 4 3000 2500 1/4 5/16 0.088 280 300 380 0.018 1/4 1/8 380 4 3500 2800 1/4 5/16 0.093 320 360 470 0.021 1/4 5/32 400 4 4000 3200 5/16 5/16 0.100 370 470 500 0.025 3/8 5/32 520 5 5000 4100 3/8 7/16 0.120 500 600 680 0.031 3/8 3/16 650 5 6000 4800 3/8 1/2 0.130 680 800 930 0.034 3/8 3/16 750 6 7000 5500 7/16 9/16 0.150 800 920 1100 0.040 3/8 3/16 900 6 7800 6300 7/16 5/8 0.160 1000 1270 1400 0.044 3/8 3/16 1000 8 8700 7000 7/16 11/16 0.180 1200 1450 1700 0.050 1/2 1/4 1200 8 9500 7500 1/2 3/4 0.190 1450 1700 2000 0.056 1/2 1/4 1350 10 10300 8300 9/16 7/8 0.210 1700 2000 2450 0.062 1/2 1/4 1500 10 11000 9000 5/8 1 0.220 1950 2400 2900 0.070 5/8 1/4 1700 12 12300 10000 5/8 1-1/8 0.250 2400 2800 3550 0.078 5/8 5/16 1900 14 14000 11000 11/16 1-1/4 0.275 2700 3400 4000 0.094 5/8 5/16 2400 16 15700 12700 3/4 1-1/2 0.290 3550 4200 5300 0.109 3/4 3/8 2800 18 17700 14000 13/16 1-1/2 0.290 4200 5000 6400 0.125 3/4 3/8 3300 20 18000 15500 7/8 2 0.300 5000 6000 7600 NOTES: 1.
    [Show full text]
  • Why Your Scope Needs a Professional Installation
    Why your scope needs professional installation? By José L. Rodríguez (The Scopesmith) The ultimate goal of an accurate rifle is allowing the shooter achieve his/her accuracy potential (generic “his” from now on). Many good shooters can exceed the accuracy of their rifles, but that only happens when other factors like ammunition and optics do not get on the way. A good scope, professionally installed, will take inaccuracy due to optics out of the equation. Which are the seven steps of a correct scope installation? 1.- Equipment selection and matching Many shooters use their entire budget buying their dream rifle and then put on it the first scope they can afford. That reminds me of the old times when as a youngster I used all my savings to get a great stereo receiver but then could only afford some crappy used speakers. I never realized the quality of my receiver until I replaced the speakers years later. Again, the goal of optics is to allow the shooter to achieve his accuracy potential. The quality of the scope should be at least as good of the quality of the rifle when compared to available alternatives. The scope should also match the priorities of the intended use of the rifle: bench accuracy? ruggedness? expected target distance/size? fast target acquisition? ability to see even in a very dim light? Selection mistakes are even more common for rings and bases. I find that many scopes are not installed with the right rings or bases but with whatever was available on the gun store.
    [Show full text]