Manufactured Wood-Veneer-Faced Casework
SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Custom Cabinet Units a. Wood, Transparent Finish, Custom Cabinet Units b. Provide Cabinet Units that comply with Modular Casework Program guidelines. c. Powder Coated Medium Density Fiberboard (MDF) 2. Cabinet Hardware 3. Illuminated Metal Mesh at Front Desk and Bar. 4. Metal Mesh Bi-passing Doors at Bar/Bistro B. Related Sections: 1. Section 06 61 00 - Rough Carpentry 2. Section 06 20 00 - Finish Carpentry 3. Section 12 32 16 – Manufactured Plastic Laminate Clad Casework 4. Section 12 36 23 - Plastic Countertops 5. Section 12 36 40 - Stone Countertops 6. Section 12 36 61 – Simulated Stone Countertops 7. Section 12 36 61.13 – Cultured Marble Countertops 8. Section 12 36 61.16 – Solid Surfacing Countertops 9. Section 12 36 63 – Ultracompact Surfacing Countertops 10. Division 22 for Plumbing Fixtures 1.02 REFERENCES A. Architectural Woodwork Institute (AWI) / Architectural Woodwork Manufacturers Association of Canada (AWMAC) /Woodwork Institute (WI) Publications: 1. "Architectural Woodwork Standards (AWS)" B. ASTM International (ASTM) Publications: 1. C1048 “Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass” 2. D523 “Standard Test Method for Specular Gloss” 3. E84 "Standard Test Method for Surface Burning Characteristics of Building Materials" C. American National Standards Institute (ANSI) Publications: 1. A135.4 Basic Hardboard 2. ANSI/KCMA A161.1 “Performance and Construction Standard for Kitchen and Vanity Cabinets 3. A161.2 “Standards for Fabricated High Pressure Decorative Laminate Countertops” 4. A208.1 "Standards for the Performance of Particleboard" ▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 1 ▪ FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework REVISED: 08/24/18
2018, Marriott International, Inc. CFRST SPECMSTR-NEW BUILD 5. A208.2 “Medium Density Fiberboard (MDF) for Interior Applications.” D. Hardwood Plywood & Veneer Association (HPVA) Publications: 1. ANSI/HPVA HP-1: "American National Standard for Hardwood and Decorative Plywood" E. National Electrical Manufacturer’s Association (NEMA) Standards Publications: 1. NEMA LD3 “High Pressure Decorative Laminates” 1.03 SUBMITTALS A. General: Submit the following in accordance with Conditions of Contract and Division 01 Specification Sections. B. Submit “Letter of Conformance” in accordance with Section 01 33 00 indicating specified items selected for use in project with the following supporting data. 1. Submit Shop Drawings and product data. Include materials, component profiles, fastening methods, assembly methods, joint details, accessory listings, and schedule of finishes. a. Show locations and sizes of furring, blocking, and hanging strips, including concealed blocking and reinforcement specified in other Sections. b. Show locations and sizes of cutouts and holes for plumbing fixtures, faucets, soap dispensers, and other items installed in architectural woodwork. 1.04 DELIVERY, STORAGE, AND HANDLING A. Do not deliver casework until painting and similar operations that could damage synthetic marble have been completed in installation areas. If casework components must be stored in other than installation areas, store only in areas where environmental conditions comply with requirements specified in "Project Conditions" Article. B. Handle materials to prevent damage to finished surfaces. Provide protective coverings to prevent physical damage or staining following installation for duration of project. 1.05 PROJECT CONDITIONS A. Environmental Limitations: Do not deliver or install casework until building is enclosed, wet work is complete, and HVAC system is operating and maintaining temperature and relative humidity at occupancy levels during the remainder of the construction period. B. Field Measurements: Where casework is indicated to fit to other construction, verify dimensions of other construction by field measurements before fabrication and indicate measurements on Shop Drawings. Coordinate fabrication schedule with construction progress to avoid delaying the Work. 1. Locate concealed framing, blocking, and reinforcements that support casework by field measurements before being enclosed and indicate measurements on Shop Drawings. PART 2 PRODUCTS 2.01 APPROVED MANUFACTURERS A. Avendra, LLC Preferred Manufacturers: 1. None B. Approved Manufacturers: 1. MillRock RiverRun Casework (540-438-5973) 2. R.B. Woodcraft, Inc. (315-474-2429) 3. J. Suss Industries Inc. (866-769-5666)
▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 2 ▪ REVISED: 08/24/18 FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework
CFRST SPECMSTR-NEW BUILD 2018, Marriott International, Inc. 2.02 WOOD, TRANSPARENT FINISH CUSTOM BOX CABINET UNITS - GENERAL A. All cabinets shall be the same construction type for the entire Project. B. Quality Standard: 1. Perform work to meet the requirements of Custom Grade in accordance with the "Architectural Woodwork Standards (AWS)", unless noted otherwise manufactured from solid stock meeting the following requirements: a. Minor warp which can be held flat and straight with normal nailing is permitted. b. Natural and manufacturing defects in excess of those permitted in the grade specified are permitted if such defects are to be covered by adjoining members or otherwise concealed. c. Trim members for application on flat surfaces shall have the reverse side "backed out", except members with exposed ends. d. "Custom grade" pieces shall be smoothly machined with top flat surfaces machine sanded. Depressed flat surfaces and molded contours shall be smoothly machined. 2. Design: Style of face construction for base, wall, and full-height units, if any, with drawer fronts, doors, and fixed panels as follows: a. Frameless. b. Cabinet and Door Interface: Flush (Full) Overlay. c. Flush Panel Doors. d. Flush Panel Drawer Fronts. e. Color: Refer to Interior Finish Index 3. Grain Direction: a. Vertical on doors, horizontal on drawer fronts. b. Vertical on end panels. c. Side to side on bottoms and tops of units. d. Vertical on knee-space panels. e. Horizontal on aprons. 2.03 MATERIALS A. Lumber shall be in accordance with the AWS Grade specified for the product being fabricated. Moisture content shall be 6% to 12% for boards up to 2-inches nominal thickness, and shall not exceed 19% for thicker pieces. B. Solid Lumber: Dry, sound, selected to eliminate appearance defects. Do not use two adjacent exposed surfaces that are noticeably dissimilar in color, grain, figure, or natural character markings. Provide the following species: 1. [Hard Maple - "Select White" (Sapwood)] [or] [Yellow Birch - "Select White" (Sapwood)], plain (flat) sliced, custom grade. C. Plywood Face Veneer: HPVA HP-1. Same species as exposed lumber, unless otherwise indicated, selected for grain and color compatible with exposed solid lumber, with Grade A faces and Grade C backs of same species as faces, no defects. Edgeband exposed edges with solid wood of same species as face veneer. 1. [Hard Maple - "Select White" (Sapwood), plain (flat) sliced] [or] [Yellow Birch - "Select White" (Sapwood), rotary sliced], custom grade. ▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 3 ▪ FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework REVISED: 08/24/18
2018, Marriott International, Inc. CFRST SPECMSTR-NEW BUILD D. Particle Board: ANSI A208.1, Mat-Formed Particle Board, Grade 1-M-2, with minimum density of 45 pcf. Internal bond of 60 psi, and minimum screw holding capacity of 225 lb. on faces and 200 lb. on edges. E. Hardboard: ANSI A135.4, Class 1, tempered. F. MDF: ANSI A208.2, Grade 130. G. Thermoset Decorative Overlay (Melamine): Not less than 100 gram thermally fused, melamine- impregnated decorative paper,. Finish shall be resistant to water and mild cleaners. H. Edgebanding for Thermoset Decorative Overlay (Melamine) finished Panels: PVC or polyester edgebanding in color selected by the [Architect]
2.05 FABRICATION – FRAMELESS CABINETS A. General: 1. Exposed and Semi-exposed Ends; Top and Bottom Rails; and Sub-toe Boards:
▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 4 ▪ REVISED: 08/24/18 FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework
CFRST SPECMSTR-NEW BUILD 2018, Marriott International, Inc. a. Not less than ¾” thick solid hardwood, or ¾” plain sliced walnut wood veneer over plywood or Medium Density Fiberboard (MDF), or ¾” thick (or not less than 5/8” thick) thermofused melamine finish over MDF or Industrial hardboard (particle board). 1) Machine ends for wood-dowel or mechanical dowel fasteners to receive top, bottom, and back. Base ends to extend to floor. Finish exposed ends to match doors and doors and drawer fronts. 2. Unexposed Ends: Not less than 3/4-inch hardboard or particle board; finished with Thermoset Decorative Overlay (Melamine). Attach to front frame in same manner as exposed ends. 3. Back Panels: a. Not less than 1/4-inch tempered hardboard or MDF; finished with Thermoset Decorative Overlay (Melamine). 4. Doors 48 Inches or Less in Height: a. Flush (Slab) Style Doors: 3/4 inch thick, Plywood, Particle Board or MDF cores, and hardwood face veneers. All doors that are not hardwood to received PVC edgeband. b. Single Fixed Panel Stile and Rail Style Doors: 3/4 inch thick, with solid hardwood stiles and rails, Particle Board or MDF cores, and hardwood face veneers and crossbands. c. Provide stop silencers at the top and bottom of all hinged doors. 5. Shelving: Not less than 5/8” industrial hardboard or MDF with Thermoset Decorative Overlay (Melamine) to match cabinet interior, PVC edge banding; adjustable at least every 1-1/2 inch; clear plastic [seismic] shelf clip pressed into 5mm holes bored in cabinet side. Fabricate base shelf to half depth. 6. Filler Strips: a. Provide as needed to close spaces between cabinets and walls, ceilings, and indicated equipment. Fabricate from same material and with same finish as cabinets. b. Oversize for field cutting to suit field conditions and assure continuous enclosure of open spaces. c. Provide raw (unfinished) cleats at blind corners and appliance openings as required to support countertops, minimum 3/4-inch x 1-1/2 inch x 8 foot length, to be field cut and fit by the installer 7. Interior Cabinet Finish: a. Public Space Casework: Interior face of cabinet units that have surfaces that are exposed shall be Thermoset Decorative Overlay (melamine) in color to match door fronts as approved by Marriott Representative. b. Public Space Casework Wet Areas: Interior unexposed face of units that are likely to become wet (such as cabinets housing refrigerated cold pans) should be constructed of polyester overlaid plywood cabinet liner materials: 1) Approved Manufacturer: “Cabinet Liner Industrial Panel”; Olympic Panel Products, LLC (800-782-7265), or approved substitution. 8. Interior Cabinet Finish: Back-of-House Casework: Interior face of cabinet units that have surfaces that are exposed shall be White Thermoset Decorative Overlay (melamine).
▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 5 ▪ FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework REVISED: 08/24/18
2018, Marriott International, Inc. CFRST SPECMSTR-NEW BUILD a. Public Space Casework Wet Areas: Interior unexposed face of units that are likely to become wet (such as cabinets housing refrigerated cold pans) should be constructed of polyester overlaid plywood cabinet liner materials: 1) Approved Manufacturer: “Cabinet Liner Industrial Panel”; Olympic Panel Products, LLC (800-782-7265), or approved substitution. B. Base Cabinet Units: 1. Base Cabinet Top Stretchers: a. Cabinet stretchers attached horizontally to top of cabinet-side at front and rear to keep cabinet square. b. At sink cabinet or cooktop cabinet front cabinet stretcher to be mounted vertically to avoid impediment with sink or cooktop appliance. 1) Option: a) Provide 3/4" thermofused melamine or not less than ½” hardwood plywood corner blocks glued and fastened in each of four top corners to maintain cabinet square and rigid. b) Or provide Plastic Corner Blocks at four top corners fastened to side panel and front/rear cabinet components. 2. Base Cabinet Toe Space & Kick Board: a. To be integrated with side panels, capturing toe kick between side panels. b. Side panels to be notched for integral toe space with side panels extended to floor for continuous support. Finish bottom, side and top edge of side panels with PVC edgebanding to prevent water absorption. 1) Option: Provide mechanical waterproof leg (plastic or metal) attached to bottom of cabinet, toe kick boards attached via clip system from Hafele (or equal). c. Finish bottom edge of thermofused melamine side panels with PVC edge banding to prevent water absorption. d. Provide toe board cover not less than 1/4" tempered hardboard or MDF with thermofused melamine face and side top surface to match cabinet doors, or hardwood plywood. Apply after installation to achieve a continuous toe board cover; minimize seams. e. Seal bottom, side and top edge of toe kick board with PVC edge band to prevent water absorption 3. Drawers: a. Sides, front, and back: Box-type thermofused melamine construction ¾” (or not less than 5/8"), or hardwood not less than ½”, with sub-front and back joined to sides with glued dovetail, or glued and doweled, or mechanical dowel, or rabbeted into side and secured with glue and mechanical fasteners. b. Exposed fronts fastened to sub-fronts with adjustable drawer-front mounting system or with mounting screws from interior of body. c. Bottom: Not less than ½” or 3/8”" hardwood plywood or thermofused melamine on MDF or Industrial hardboard. Drawer box sides and front/back to be grooved to accept bottom panel, bottom panel to be fully inserted into groove to create permanent attachment. 1) Option: drawer sides by “Metabox Drawer System” (or equal) are acceptable. ▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 6 ▪ REVISED: 08/24/18 FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework
CFRST SPECMSTR-NEW BUILD 2018, Marriott International, Inc. C. Wall Cabinet Units: 1. Hanging rails: (used when back panel is less than 5/8" thick): a. Not less than 1/2" x 3" plywood, or not less than 5/8" x 3" Thermofused Melamine, edge banded all exposed edges, and fastened at each end to side panel at top and bottom. 2. Bottom finish: a. Frameless cabinet box to be finished on underside to match door and end panels. b. Wherever under-cabinet lighting is called for, recess bottom panel/shelf up into cabinet and provide light valance, to hide light fixture, sandwiched between cabinet side panels. Maintain full overlay of door so light valance is hidden when door is closed. Depth of lighting recess under cabinet to be 1”, or deeper if needed, to hide specified under-cabinet lighting fixture. Exposed interior surface of side panel and back panel at lighting recess will show interior cabinet color. 2.06 CABINET HARDWARE A. See Cabinet Hardware Schedule for list of which Manufacturers are approved for use on a specific item. B. Avendra, LLC Preferred Manufacturers: 1. None C. Approved Manufacturers 1. Accuride International (562-903-0200) 2. Blum, Inc. (800-438-6788) 3. CompX Timberline (847-752-2600) 4. Corbin Russwin Architectural Hardware, an ASSA ABLOY Group (800-543-3658) 5. Epco, The Engineered Products Co. (810-767-2050) 6. Franklin Fixtures (508-291-1475) 7. Grass America, Inc. (800-334-3512) 8. Hafele America Co. (800-423-3531) 9. H.B. Ives, an Ingersoll-Rand Company (800-820-5542) 10. Hercules Casters and Wheels (800-942-8717) 11. Hettich America, LP (800-777-1772) 12. J. G. Edelen Company, Inc. (410-918-1200) 13. Knape & Vogt Manufacturing Co. (800-253-1561) (KV) 14. Doug Mockett & Company, Inc. (800-523-1269) 15. Outwater Plastics Industries, Inc. (800-631-8375) 16. Polar Ware Company (800-237-3655) 17. Richelieu America (704-330-0114) a. Contact: Architectural Business Development: Michael Baer (704-330-0114) b. Contact: Technical Support Resources Manager: Michael Holiday (336-256-9570 x 3511)
▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 7 ▪ FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework REVISED: 08/24/18
2018, Marriott International, Inc. CFRST SPECMSTR-NEW BUILD 18. Rockler Companies, Inc. (800-279-4441) 19. Selby Furniture Hardware Co., Inc. (718-993-3700) 20. Shepherd Caster Corporation (800-253-0868) 21. Stanley Hardware, Div. of the Stanley Works (800-493-5263) 22. Stylmark, Inc. (Garcy Corp.) (800-328-2495) 23. Victory Display & Store Fixture Mfg. (800-262-1126) D. General: Provide cabinet hardware and accessory materials associated with architectural cabinets. Coordinate finishes of exposed cabinet hardware with adjacent finish hardware as specified in Section 08 71 00. 1. All exposed hardware to be US26D (626 Bronze) unless noted otherwise. E. Cabinet Hardware Schedule: ITEM MODEL NO. MANUFACTURER THE MARKET Cabinet Pulls DP41-A-3 EPCO Cabinet Locks 280 Series (Drawers) CompX-Timberline 290 Series (Doors) C700LP-15 Plugs (This item keyed separately- See Note 2) Concealed Hinges Tiomos Series Grass America
Concealed Hinges at upward lifting cabinet Kinvaro T-105 Grass America doors Shelf Supports (non-exposed 5mm) 345 KV Shelf Supports Pins and Bussings 326 Grommets w/ 330 KV (Exposed 5mm) Round Shelf Pins Barrister Drawer Slide 18235 Rockler OTHER HARDWARE (Refer to Section 12 32 16)
Note 1: All locks in the same component to be on the same key, unless noted otherwise. Other millwork items on the hotel property with locks shall be keyed separately. Ensure master key is different at each hotel in the system.
1. All exposed hardware to be US26D (626 Bronze) unless noted otherwise. F. Cabinet Hardware Schedule: ITEM MODEL NO. MANUFACTURER THE CORNER MARKET Cabinet Pulls DP41-A-3 EPCO Cabinet Locks 280 Series (Drawers) CompX-Timberline 290 Series (Doors) C700LP-15 Plugs keyed alike Concealed Hinges Tiomos Series Grass America
Concealed Hinges at upward lifting cabinet Kinvaro T-105 Grass America doors Shelf Supports (non-exposed 5mm) 345 KV Shelf Supports Pins and Bussings 326 Grommets w/ 330 KV (Exposed 5mm) Round Shelf Pins Barrister Drawer Slide 18235 Rockler
▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 8 ▪ REVISED: 08/24/18 FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework
CFRST SPECMSTR-NEW BUILD 2018, Marriott International, Inc. OTHER HARDWARE (Refer to Section 12 32 16)
1. All exposed hardware in Public Spaces to be US15 unless noted otherwise. G. Cabinet Hardware Schedule: ITEM MODEL NO. MANUFACTURER
FRONT DESK Brackets, Interior 187, 171, 173, and 179 K&V Catch, Elbow 2 (Bronze) Ives Catch, Roller 336 (Bronze) Ives Drawer Locks Drawer Slides 3832 Accuride
Folding Table Brackets 250080 (Zinc) Stanley Hinges, Pivot 341 Stanley Hinges, Continuous (Piano) 311-1/4 x 2-1/2” x 72” Stanley Magnetic Catches 323, 326, and 327 Ives Pulls, Door and Drawer (Refer to Interior 120.61.950 x Tarnished Hafele Finish Index for locations) Silver Shelf Supports, Interior 256 K&V Sliding Door Finger Pulls Sliding Door Lock Standards, Interior 255, 87, 71, & 80 K&V (Anachrome) THE MARKET Base Cabinet Legs 637.45.326 Hafele Toe Kick Panel Clip 637.45.915 Hafele Concealed Shelf Standard T-Standard7/16” HB800-7 Victory Store Fixtures Adjustable Shelf Bracket 179 Anochrome KV Shelf Fastener 154 Anochrome KV Glass Doors 3/16” Thick Tempered Safety Glass Glass Door Hinges (matt chrome) 316.33.300 Type 18 Hafele Glass Door Hinge Round Trim Cap 316.10.420 Hafele Cabinet Pulls 115.61.601 Stanley Cabinet Pulls (Option) 4485 1/2 Stanley Cabinet Locks 02066 Corbin Concealed Hinges at upward lifting Kinvaro T-105 Grass America cabinet doors Alum. Slatwall # ALU7584-M Outwater Slatwall Hooks Coordinate with Slatwall manufacturer. Condiment Container 2Y Bain Marie (Stain Steel) Polarware Metal Shelf (powder coated aluminum) Flat Metal Shelf Franklin Fixtures Concealed Hinges Nexis 100 Inset Hinge Grass America GUESTROOMS & EMPLOYEE LOUNGE (Refer to Section 12 35 30.13)
1. All exposed hardware to be US26D (626 Bronze) unless noted otherwise. H. Cabinet Hardware Schedule: ITEM MODEL NO. MANUFACTURER THE MARKET ▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 9 ▪ FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework REVISED: 08/24/18
2018, Marriott International, Inc. CFRST SPECMSTR-NEW BUILD Cabinet Pulls Cabinet Locks 280 Series (Drawers) CompX-Timberline 290 Series (Doors) C700LP-15 Plugs keyed alike Concealed Hinges Tiomos Series Grass America
Concealed Hinges at upward lifting cabinet Kinvaro T-105 Grass America doors Shelf Supports (non-exposed 5mm) 345 KV Shelf Supports Pins and Bussings 326 Gromments w/ 330 KV (Exposed 5mm) Round Shelf Pins Barrister Drawer Slide 18235 Rockler BUSINESS CENTER Magnetic Catches 323, 326, and 327 Ives Concealed Hinges Tiomos Series Grass America OTHER HARDWARE (Refer to Section 12 32 16)
1. All exposed hardware to be US26D (626 Bronze) unless noted otherwise. I. Cabinet Hardware Schedule: ITEM MODEL NO. MANUFACTURER THE MARKET Base Cabinet Legs 637.45.326 Hafele Toe Kick Panel Clip 637.45.915 Hafele Concealed Shelf Standard T-Standard7/16” HB800-7 Victory Store Fixtures Adjustable Shelf Bracket 179 Anochrome KV Shelf Fastener 154 Anochrome KV Glass Doors 3/16” Thick Tempered Safety Glass Glass Door Hinges (matt chrome) 316.33.300 Type 18 Hafele Glass Door Hinge Round Trim Cap 316.10.420 Hafele Cabinet Pulls 115.61.601 Stanley Cabinet Pulls (Option) 4485 1/2 Stanley Cabinet Locks 02066 Corbin Concealed Hinges Nexis 100 Inset Hinge Grass America Concealed Hinges at upward lifting cabinet Kinvaro T-105 Grass America doors Alum. Slatwall # ALU7584-M Outwater Slatwall Hooks Coordinate with Slatwall manufacturer. Condiment Container 2Y Bain Marie (Stain Steel) Polarware Metal Shelf (powder coated aluminum) Flat Metal Shelf Franklin Fixtures Concealed Hinges 1805 VZDT32 Grass OTHER HARDWARE (Refer to Section 12 32 16)
J. Cabinet Hardware Schedule: 1. Refer to Section 12 35 30.13 – Kitchen Casework. for Guestroom, and Employee Lounge cabinet hardware. K. Exposed Wall Shelving: “No. 80 x No. 182”; Knape & Vogt Manufacturing Co.; inset type, adjustable on 1" centers. L. Cash Drawer With Lock 1. Furnished by Owner. Contractor shall coordinate size. ▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 10 ▪ REVISED: 08/24/18 FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework
CFRST SPECMSTR-NEW BUILD 2018, Marriott International, Inc. a. Provide 1/8” clearance around all four sides, or as recommended by manufacturer. M. Illuminated Metal Mesh 1. “Model GW-911 Venetian”; The Gage Corporation International (800-786-4243) 2.07 INSTALLATION MATERIALS A. Furring, Blocking, Shims, and Hanging Strips: Fire-retardant-treated Softwood or hardwood lumber, kiln-dried to less than 15 percent moisture content. B. Anchors: Select material, type, size, and finish required for each substrate for secure anchorage. Provide nonferrous-metal or hot-dip galvanized anchors and inserts on inside face of exterior walls and elsewhere as required for corrosion resistance. Provide toothed-steel or lead expansion sleeves for drilled-in-place anchors. 1. Adhesives: Installation adhesives as recommended by manufacturer for use intended. 2.08 SHOP FINISHING A. Quality Standard: Comply with AWS Appendix B, unless otherwise indicated. B. General: Finish casework at fabrication shop as specified in this Section. Defer only final touchup, cleaning, and polishing until after installation. C. Backpriming: Apply one coat of sealer or primer, compatible with finish coats, to concealed surfaces of woodwork. Apply two coats to back of paneling. D. Transparent Finish: Comply with requirements indicated below for grade, finish system, staining, and sheen, with sheen measured on 60-degree gloss meter per ASTM D523: 1. Grade: Custom. 2. Finish System: Finish System -2, pre-catalyzed lacquer. a. Stain Color: Refer to Interior Finish Index. b. 1 Coat precatalyzed sanding sealer c. Sand after curing with 240 Grit d. 1 Coat colored sealer e. 1 Coat precatalyzed sealer f. Sand after curing with 320 Grit g. 1 Coat precatalyzed lacquer - 30% Sheen (semi-gloss) to match approved sample provided by Marriott. PART 3 EXECUTION 3.01 INSPECTION A. Verify adequacy of backing and support framing. 3.02 INSTALLATION A. All cabinets and shelving shall be installed as shown on Drawings and as specified by manufacturer. B. Set and secure casework in place rigid, plumb, and level. C. Cabinets: Install without distortion so doors and drawers fit openings properly and are accurately aligned. Adjust hardware to center doors and drawers in openings and to provide unencumbered operation. Complete installation of hardware and accessory items as indicated. 1. Secure cabinet and counter bases to floor using appropriate angles and anchorages. ▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 11 ▪ FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework REVISED: 08/24/18
2018, Marriott International, Inc. CFRST SPECMSTR-NEW BUILD 2. Install cabinets with no more than 1/8 inch in 96-inch sag, bow, or other variation from a straight line. 3. Maintain veneer sequence matching of cabinets with transparent finish. 4. Carefully scribe casework which is against other building materials, leaving gaps of 1/32 inch maximum. Do not use additional overly trim for this purpose. 5. Carefully fit equipment to be installed into millwork. Provide filler pieces when required. D. Fasteners: 1. Use purpose designed fixture attachments at concealed locations for wall-mounted components. 2. Use threaded steel concealed joint fasteners to align and secure adjoining cabinet units and counter tops. 3. Countersink anchorage devices at exposed locations used to wall-mount components, and conceal with solid plugs of species to match surrounding wood. Finish flush with surrounding surfaces. 4. Install countertops with no more than 1/8 inch in 96-inch sag, bow, or other variation from a straight line. 3.03 ADJUSTING AND CLEANING A. Adjust doors, drawers, hardware, fixtures and other moving or operating parts to function smoothly and correctly. B. Clean casework, shelves, hardware, fittings and fixtures.
END OF SECTION
C. Revision Log
▪ SECTION 12 32 13 - MANUFACTURED WOOD-VENEER-FACED CASEWORK ▪ ▪ PAGE 12 ▪ REVISED: 08/24/18 FILE: 12-123213-CFRST-Manufactured Wood-Veneer-Faced Casework
CFRST SPECMSTR-NEW BUILD 2018, Marriott International, Inc.