WOOD CASEWORK CATALOG
53 Courtland Avenue | Vaughan, Ontario, Canada L4K 3T2 | 905.738.5821 www.cifsolutions.com WOOD CABINET LINES
Contents
E-Line Series (Wood Casework)...... 2-3 K-Line Series (Wood Casework)...... 4-5 D-Line Series (Wood Casework)...... 6-7
L-Line Series (Wood Casework)...... 8-9
M-Line Series (MDF Casework)...... 10-11 Q-Line Series (Plastic Laminate Casework)...... 12-13
1 2013 WOOD CABINET LINES
E-Line Series
Premium wood casework that is expected to be used in design of educational teaching and research science laboratories. Using CiF’s wide range of options, you can create the appropriate cabinet for any application. By using parametric engineering for easy cabinet modifications and versatility of many veneer species / cuts, the E-Line by CiF Lab Solutions is the perfect choice for your interior build-out.
Drawer boxes consist of ½" 9-ply Baltic birch plywood dove-tailed on all 4 joints. The drawer bottom is Stretcher rail construction consists of white thermo-fused melamine on ¼" a horizontal front rail and two vertical MDF board, captured on all four sides back rails that are doweled into the and glued in place. Drawer fronts are cabinets ends…providing excellent applied separately. structural rigidity and strength
Flat-line finishing provides a finish that meets AWI Quality Standards and SEFA 8-1999 Chemical Resistance Specifications. Our finish is our signature. All door and drawer fronts shall be vertically grain matched within the same cabinet.
An extensive list of “AA” grade veneer choices are available (including Red Oak, White Oak, White Maple, Birch, European Steamed Beach, Cherry and Bamboo). Our veneers for door and drawer fronts are procured Hardware: various laboratory grade as “unsanded”, allowing final hinges, pulls, drawer slides, locks sanding after edge-banding in and catches are used in the cabinet our factory. This unique process construction (per specification details). provides for a “truly finished” 1/45" thick veneer that AWI requires. It also results in a superior finish that will enhance the quality of your installation.
SEFA (Scientific Equipment AWI and AWI Premium construction FSC and NAUF materials Furniture Association)…as a SEFA guidelines and materials are referenced and are available to assist in member, CiF builds our standard followed (with your project specification meeting your project’s cabinets in compliance with all requirements given priority) in casework environmental objectives. SEFA requirements. construction at CiF Lab Solutions.
For materials and construction methods, refer to our specifications. 2 2013 WOOD CABINET LINES
E-Line Wood Casework Options Menu *Options in bold are standard
1. Cabinet Construction 13. Cabinet Edgebanding Full Stretcher Frame 1/8" rolled type banding Full Sub Top 1/4" solid stick banding Full Top Frame 14. Base Cabinet Shelves (Wall and tall cabinet shelves default will be full depth) 2. Intermediate Rails (Intermediate rails will be provided when locks are specified)) 3/4 depth shelves (open base cabinet shelves will default to full depth) None Full depth shelves Between drawers and between drawers over doors Split depth shelves
3. Cabinet Veneer Species and Cut 15. Drawer Box Construction Red Oak - Plain Sliced Fully dovetailed, 9 ply Baltic Birch, with 1/4" white TFM on MDF Red Oak - Rift Cut core bottoms White Oak - Plain Sliced Fully dovetailed, 9 ply Baltic Birch, with 1/2" - 9 ply Baltic Birch White Oak - Rift Cut plywood bottoms White Maple - Plain Sliced White Maple - Quarter Cut 16. Drawer Slides for Standard Drawers White Birch - Rotary Cut 3/4 extension, nylon roller, epoxy coated, 100 lb. European Steamed Beech - Plain Sliced Full extension, ball bearing, zinc, 100 lb. Natural Bamboo (Edge Grain) Full extension, ball bearing, epoxy coated, 100 lb. Caramelized Bamboo (Edge Grain) Full extension, ball bearing, zinc, 150 lb. Other species and cuts are available upon request 17. Drawer Slides for File Drawers 4. Green Options (Options listed can help to contribute to specific LEED points, however Full extension, nylon roller, epoxy coated, 100 lb. the total project requirements must be met in order to achieve the desired LEED Full extension, ball bearing, zinc, 100 lb. points. 100% Recycled and recovered content only applies to PC and MDF). Full extension, ball bearing, epoxy coated, 100 lb. None Full extension, ball bearing, zinc, 150 lb. NAUF FSC NAUF/FSC 18. Hinges (five knuckle hinges will require a door catch. Both three knuckle and 100% Recycled and Recovered Content concealed hinges have a self-closing mechanism). 100% Recycled and Recovered Content, NAUF Heavy duty, five knuckle - painted 100% Recycled and Recovered Content, FSC Heavy duty, five knuckle - brushed chrome 100% Recycled and Recovered Content, NAUF/FSC Medium duty, concealed, 170 open - nickel plated Medium duty, three knuckle, 270 open - nickel plated Heavy duty, five knuckle - stainless steel 5. Cabinet Body Substrate Particleboard Core MDF Core 19. Door Catches. Veneer Core Metal roller catch Combination Core Magnetic catch Other Cores are available upon request 20. Pulls 6. Door and Drawer Substrate (CiF does not recommend using Veneer Core as a 4" wire pull - aluminum substrate for doors and drawer fronts). 4" wire pull - brushed chrome Particleboard Core 4" wire pull - bright chrome MDF Core 4" wire pull - stainless steel Combination Core 4" wire pull - painted Metal flush pull, black Metal flush pull, nickel 7. Treatment of Unexposed and Concealed Ends 4" D pull, aluminum Hardwood veneer with sealer Semi-recessed pull Same species and finish as exposed Oversized semi-recessed pull Other, specify 8. Cabinet Base Cabinet end to floor 21. Shelf Supports Cabinet end to floor, bottom edge banded with 1/4" solid hardwood for Angled Steel Pin protection against moisture Poly-carbonate, seismic type Waterproof fir plywood base 22. Locks (optional) 9. Base Cabinet Backs (Exposed backs will match the veneer species and cut of the 5 disc cam lock exposed cabinet ends). 5 pin cam lock Semi-exposed: White Hardboard 5 pin dead bolt lock Semi-exposed: finished plywood with matching interior grade veneer Other, specify Unexposed (drawer units): no backs Unexposed (drawer units): White Hardboard 23. Keying for Locks Keyed alike 10. Wall and Tall Cabinet Backs (Exposed backs will match the veneer species and cut Keyed alike per room of the exposed cabinet ends). Keyed differently (Security panels will be provided between drawers) Semi-exposed: White Hardboard Semi-exposed: finished plywood with matching interior grade veneer 24. Glass for Glazed Doors Tempered 11. Door and Drawer Front Overlay (Reveals between doors and drawer fronts on the Laminated Safety face of the same cabinet will always be 1/8". Two adjacent cabinets will have double the reveal when install side by side). Reveal Overlay (3/8" reveal on cabinet end) 25. Label Holders (optional) Full Flush Overlay (1/16" reveal on cabinet end) File drawer only All drawers (including file drawers) All drawers and doors (double doors will receive one) 12. Grain Direction on Doors and Drawer Fronts Combination grain (horizontal on drawer fronts and vertical on doors) 26. Number Plates (optional) Vertically matched grain (vertical on drawer fronts and doors, Shipped loose for field installation available with reveal overlay and full flush) Vertically matched grain, center balanced and sequenced matched by cabinet
3 2013 WOOD CABINET LINES
K-Line Series
Premium reveal overlay wood casework that is expected to be used in design of primary educational K-12 science laboratory environments and general classroom applications. The same general construction materials and methods used in the E-Line Series, with less veneer species options. This cabinet offering delivers detailed quality, engineered to meet the needs of each school’s programming needs.
Drawer boxes consist of ½" 9-ply Baltic birch plywood dove-tailed on all 4 joints. The drawer bottom is Stretcher rail construction consists of a white thermo-fused melamine on ¼" horizontal front rail and two vertical back MDF board, captured on all four sides rails that are doweled into the cabinets and glued in place. Drawer fronts are ends…providing excellent structural rigidity applied separately. and strength
Flat-line finishing provides a finish that meets AWI Quality Standards and SEFA 8-1999 Chemical Resistance Specifications. Our finish is our signature. All doors will have a vertical grain orientation and the drawer fronts will be horizontal (combination grain within a specific cabinet). “A” grade veneer choices include Plain Sliced Red Oak, Plain Sliced White Maple and Rotary White Maple. Our veneers for door and drawer fronts are procured as “unsanded”, allowing final Hardware: various laboratory grade sanding after edge-banding in hinges, pulls, drawer slides, locks our factory. This unique process and catches are used in the cabinet provides for a “truly finished” construction (per specification details) 1/45" thick veneer that AWI requires. It also results in a superior finish that will enhance the quality of your installation.
SEFA (Scientific Equipment AWI and AWI Premium construction FSC and NAUF materials Furniture Association)…as a SEFA guidelines and materials are referenced and are available to assist in member, CiF builds our standard followed (with your project specification meeting your project’s cabinets in compliance with all requirements given priority) in casework environmental objectives. SEFA requirements. construction at CiF Lab Solutions.
For materials and construction methods, refer to our specifications. 4 2013 WOOD CABINET LINES
K-Line Wood Casework Options Menu *Options in bold are standard
1. Cabinet Construction 15. Drawer Box Construction Full Stretcher Frame Fully dovetailed, 9 ply Baltic Birch, with 1/4" white TFM on MDF Full Sub Top core bottoms Full Top Frame Fully dovetailed, 9 ply Baltic Birch, with 1/2" - 9 ply Baltic Birch plywood bottoms 2. Intermediate Rails (Intermediate rails will be provided when locks are specified)) 16. Drawer Slides for Standard Drawers None 3/4 extension, nylon roller, epoxy coated, 100 lb. Between drawers and between drawers over doors Full extension, ball bearing, zinc, 100 lb. Full extension, ball bearing, epoxy coated, 100 lb. 3. Cabinet Veneer Species and Cut Full extension, ball bearing, zinc, 150 lb. Red Oak - Plain Sliced White Maple - Plain Sliced 17. Drawer Slides for File Drawers White Maple - Rotary Cut Full extension, nylon roller, epoxy coated, 100 lb. Full extension, ball bearing, zinc, 100 lb. 4. Green Options (Options listed can help to contribute to specific LEED Full extension, ball bearing, epoxy coated, 100 lb. points, however the total project requirements must be met in order to Full extension, ball bearing, zinc, 150 lb.. achieve the desired LEED points. 100% Recycled and recovered content only applies to PC and MDF). 18. Hinges (five knuckle hinges will require a door catch. Both three knuckle None and concealed hinges have a self-closing mechanism). NAUF Heavy duty, five knuckle - painted FSC Heavy duty, five knuckle - brushed chrome NAUF/FSC Heavy duty, five knuckle - stainless steel 100% Recycled and Recovered Content 100% Recycled and Recovered Content, NAUF 19. Door Catches. 100% Recycled and Recovered Content, FSC Metal roller catch 100% Recycled and Recovered Content, NAUF/FSC Magnetic catch
5. Cabinet Body Substrate 20. Pulls Veneer Core 4" wire pull - aluminum 4" wire pull - brushed chrome 6. Door and Drawer Substrate (CiF does not recommend using Veneer Core 4" wire pull - bright chrome as a substrate for doors and drawer fronts). 4" wire pull - stainless steel Particleboard Core 4" wire pull - painted
7. Treatment of Unexposed and Concealed Ends 21. Shelf Supports Hardwood veneer with sealer Angled Steel Pin Same species and finish as exposed Poly-carbonate, seismic type
8. Cabinet Base 22. Locks (optional) Cabinet end to floor 5 disc cam lock 5 pin cam lock 9. Base Cabinet Backs (Exposed backs will match the veneer species and 5 pin dead bolt lock cut of the exposed cabinet ends). Other, specify Semi-exposed: White Hardboard 23. Keying for Locks 10. Wall and Tall Cabinet Backs (Exposed backs will match the veneer Keyed alike species and cut of the exposed cabinet ends). Keyed alike per room Semi-exposed: White Hardboard Keyed differently (Security panels will be provided between drawers) Semi-exposed: finished plywood with matching interior grade veneer 24. Glass for Glazed Doors 11. Door and Drawer Front Overlay (Reveals between doors and drawer Tempered fronts on the face of the same cabinet will always be 1/8". Two adjacent Laminated Safety cabinets will have double the reveal when install side by side). Reveal Overlay (3/8" reveal on cabinet end) 25. Label Holders (optional) File drawer only 12. Grain Direction on Doors and Drawer Fronts All drawers (including file drawers) Combination Grain (horizontal on drawer fronts and vertical on All drawers and doors (double doors will receive one) doors) 26. Number Plates (optional) 13. Cabinet Edgebanding Shipped loose for field installation 1/8" rolled type banding
14. Base Cabinet Shelves (Wall and tall cabinet shelves default will be full depth) Full depth shelves
5 2013 WOOD CABINET LINES
D-Line Series
Premium reveal overlay wood casework that delivers superior construction details for the primary educational customer that is determined to incorporate “traditional” cabinet details in their new installation. Captured back panels, stick stock edge banding and full hardwood top frames are hall-marks of this cabinet’s design.
Drawer boxes consist of ½" 9-ply Baltic birch plywood dove-tailed on Full hardwood top frame all 4 joints. The drawer bottom is construction consists of (4) ¾" x 2 white thermo-fused melamine on ¼" ¾" solid hardwood rails, mortise and MDF board, captured on all four sides tenoned together into an assembly. and glued in place. Drawer fronts are The assembly is then doweled into the applied separately. cabinet ends.
Flat-line finishing provides a finish that meets AWI Quality Standards and SEFA 8-1999 Chemical Resistance Specifications. Our finish is our signature. All door and drawer fronts shall be within the vertically grain matched “A” grade veneer choices same cabinet. include Plain Sliced Red Oak and Plain Sliced White Maple. Our veneers for door and drawer fronts are procured as “unsanded”, allowing final sanding after edge-banding in our factory. This unique process provides for a “truly finished” 1/45" thick veneer that AWI Hardware: various laboratory grade requires. It also results in a hinges, pulls, drawer slides, locks superior finish that will enhance and catches are used in the cabinet the quality of your installation. construction (per specification details)
1/4" edgebanding on bottom edge for moisture protection
SEFA (Scientific Equipment AWI and AWI Premium construction FSC and NAUF materials Furniture Association)…as a SEFA guidelines and materials are referenced and are available to assist in member, CiF builds our standard followed (with your project specification meeting your project’s cabinets in compliance with all requirements given priority) in casework environmental objectives. SEFA requirements. construction at CiF Lab Solutions.
For materials and construction methods, refer to our specifications. 6 2013 WOOD CABINET LINES
D-Line Wood Casework Options Menu *Options in bold are standard
1. Cabinet Construction 14. Base Cabinet Shelves (Wall and tall cabinet shelves default will be full Full Stretcher Frame depth) Full Sub Top 3/4 depth shelves (open base cabinet shelves will default to full Full Top Frame depth) Full depth shelves 2. Intermediate Rails (Intermediate rails will be provided when locks are specified)) 15. Drawer Box Construction None Fully dovetailed, 9 ply Baltic Birch, with 1/4" white TFM on MDF Between drawers and between drawers over doors core bottoms Fully dovetailed, 9 ply Baltic Birch, with 1/2" - 9 ply Baltic Birch 3. Cabinet Veneer Species and Cut plywood bottoms Red Oak - Plain Sliced White Maple - Plain Sliced 16. Drawer Slides for Standard Drawers Other species and cuts are available upon request 3/4 extension, nylon roller, epoxy coated, 100 lb. Full extension, ball bearing, zinc, 100 lb. 4. Green Options (Options listed can help to contribute to specific LEED Full extension, ball bearing, epoxy coated, 100 lb. points, however the total project requirements must be met in order to achieve the desired LEED points. 100% Recycled and recovered content 17. Drawer Slides for File Drawers only applies to PC and MDF). Full extension, nylon roller, epoxy coated, 100 lb. None Full extension, ball bearing, zinc, 100 lb. NAUF Full extension, ball bearing, epoxy coated, 100 lb. FSC Full extension, ball bearing, zinc, 150 lb.. NAUF/FSC 100% Recycled and Recovered Content 18. Hinges (five knuckle hinges will require a door catch. Both three knuckle 100% Recycled and Recovered Content, NAUF and concealed hinges have a self-closing mechanism). 100% Recycled and Recovered Content, FSC Heavy duty, five knuckle - painted 100% Recycled and Recovered Content, NAUF/FSC Heavy duty, five knuckle - brushed chrome Heavy duty, five knuckle - stainless steel 5. Cabinet Body Substrate Veneer Core 19. Door Catches. Metal roller catch 6. Door and Drawer Substrate (CiF does not recommend using Veneer Core Magnetic catch as a substrate for doors and drawer fronts). Particleboard Core 20. Pulls MDF Core 4" wire pull - aluminum Combination Core 4" wire pull - brushed chrome 4" wire pull - bright chrome 7. Treatment of Unexposed and Concealed Ends 4" wire pull - stainless steel Hardwood veneer with sealer 4" wire pull - painted Same species and finish as exposed 21. Shelf Supports 8. Cabinet Base Angled Steel Pin Cabinet end to floor, bottom edge banded with 1/4" solid hardwood Poly-carbonate, seismic type for protection against moisture 22. Locks (optional) 9. Base Cabinet Backs (Exposed backs will match the veneer species and 5 disc cam lock cut of the exposed cabinet ends). 5 pin cam lock Semi-exposed: White Hardboard 5 pin dead bolt lock Other, specify 10. Wall and Tall Cabinet Backs - Fully Captured (Exposed backs will match the veneer species and cut of the exposed cabinet ends). 23. Keying for Locks Semi-exposed: White Hardboard Keyed alike Semi-exposed: finished plywood with matching interior grade veneer Keyed alike per room Keyed differently (Security panels will be provided between drawers) 11. Door and Drawer Front Overlay (Reveals between doors and drawer fronts on the face of the same cabinet will always be 1/8". Two adjacent 24. Glass for Glazed Doors cabinets will have double the reveal when installed side by side). Tempered Reveal Overlay (3/8" reveal on cabinet end) Laminated Safety
12. Grain Direction on Doors and Drawer Fronts 25. Label Holders (optional) Combination grain (horizontal on drawer fronts and vertical on File drawer only doors) All drawers (including file drawers) Vertically matched grain (vertical on drawer fronts and doors, All drawers and doors (double doors will receive one) available with reveal overlay and full flush overlay) 26. Number Plates (optional) 13. Cabinet Edgebanding Shipped loose for field installation 1/4" solid stick banding
7 2013 WOOD CABINET LINES
L-Line Series
Premium lipped overlay wood casework that is intended to be used in design of primary educational K-12 science laboratory environments and general classroom applications. This design is a half reveal overlay construction where the door and drawer fronts have a radius lip around the perimeter of the profile. The same general construction materials and methods used in the other cabinet lines is carried through with the L-Line Series. This “traditional” door and drawer design is still the favorite of some customers.
Drawer boxes consist of ½" 9-ply Baltic birch plywood dove-tailed on all 4 joints. The drawer bottom is Stretcher rail construction consists white thermo-fused melamine on ¼" of a horizontal front rail and two MDF board, captured on all four sides vertical back rails that are doweled and glued in place. Drawer fronts are into the cabinets ends…providing applied separately. excellent structural rigidity and strength
Flat-line finishing provides a finish that meets AWI Quality Standards and SEFA 8-1999 Chemical Resistance Specifications. Our finish is our signature. All doors will have a vertical grain orientation and the drawer fronts will be horizontal (combination grain within a specific cabinet). “A” grade veneer choices include Plain Sliced Red Oak and Plain Sliced White Maple. Our veneers for door and drawer fronts are procured as “unsanded”, allowing final sanding after edge-banding in Hardware: various laboratory grade our factory. This unique process hinges, pulls, drawer slides, locks provides for a “truly finished” and catches are used in the cabinet 1/45" thick veneer that AWI construction (per specification details) requires. It also results in a superior finish that will enhance the quality of your installation.
SEFA (Scientific Equipment AWI and AWI Premium construction FSC and NAUF materials Furniture Association)…as a SEFA guidelines and materials are referenced and are available to assist in member, CiF builds our standard followed (with your project specification meeting your project’s cabinets in compliance with all requirements given priority) in casework environmental objectives. SEFA requirements. construction at CiF Lab Solutions.
For materials and construction methods, refer to our specifications. 8 2013 WOOD CABINET LINES
L-Line Wood Casework Options Menu *Options in bold are standard
1. Cabinet Construction 1/8" rolled type banding Full Stretcher Frame 1/4" solid stick banding Full Sub Top Full Top Frame 14. Base Cabinet Shelves (Wall and tall cabinet shelves default will be full depth) 2. Intermediate Rails Full depth shelves Between drawers and between drawers over doors 15. Drawer Box Construction 3. Cabinet Veneer Species and Cut Fully dovetailed, 9 ply Baltic Birch, with 1/4" white TFM on MDF Red Oak - Plain Sliced core bottoms White Maple - Plain Sliced Fully dovetailed, 9 ply Baltic Birch, with 1/2" - 9 ply Baltic Birch White Maple - Rotary Cut plywood bottoms
4. Green Options (Options listed can help to contribute to specific LEED 16. Drawer Slides for Standard Drawers points, however the total project requirements must be met in order to 3/4 extension, nylon roller, epoxy coated, 100 lb. achieve the desired LEED points. 100% Recycled and recovered content Full extension, ball bearing, zinc, 100 lb. only applies to PC and MDF). Full extension, ball bearing, epoxy coated, 100 lb. None Full extension, ball bearing, zinc, 150 lb. NAUF FSC 17. Drawer Slides for File Drawers NAUF/FSC Full extension, nylon roller, epoxy coated, 100 lb. 100% Recycled and Recovered Content Full extension, ball bearing, zinc, 100 lb. 100% Recycled and Recovered Content, NAUF Full extension, ball bearing, epoxy coated, 100 lb. 100% Recycled and Recovered Content, FSC Full extension, ball bearing, zinc, 150 lb. 100% Recycled and Recovered Content, NAUF/FSC 18. Hinges (five knuckle hinges will require a door catch. Both three knuckle 5. Cabinet Body Substrate and concealed hinges have a self-closing mechanism). Veneer Core Heavy duty, five knuckle - painted Heavy duty, five knuckle - brushed chrome 6. Door and Drawer Substrate (CiF does not recommend using Veneer Core Heavy duty, five knuckle - stainless steel as a substrate for doors and drawer fronts). Particleboard Core 19. Door Catches. Metal roller catch 7. Treatment of Unexposed and Concealed Ends Magnetic catch Hardwood veneer with sealer Same species and finish as exposed 20. Pulls 4" wire pull - aluminum 8. Cabinet Base 4" wire pull - brushed chrome Cabinet end to floor 4" wire pull - bright chrome Waterproof fir plywood base 4" wire pull - stainless steel 4" wire pull - painted 9. Base Cabinet Backs (Exposed backs will match the veneer species and cut of the exposed cabinet ends). 21. Shelf Supports Semi-exposed: White Hardboard Angled Steel Pin Semi-exposed: finished plywood with matching interior grade veneer Poly-carbonate, seismic type Unexposed (drawer unit): no backs Unexposed (drawer units): White Hardboard 22. Locks (optional) 5 disc cam lock 10. Wall and Tall Cabinet Backs (Exposed backs will match the veneer 5 pin cam lock species and cut of the exposed cabinet ends). 5 pin dead bolt lock Semi-exposed: White Hardboard Other, specify Semi-exposed: finished plywood with matching interior grade veneer 23. Keying for Locks 11. Door and Drawer Front Overlay (Reveals between doors and drawer Keyed alike fronts on the face of the same cabinet will always be 1/8". Reveals on Keyed alike per room lipped overlay will be 3/8" at cabinet ends. Two adjacent cabinets will Keyed differently (Security panels will be provided between drawers) have double the reveal when installed side by side). Style A - Lipped Overlay (Doors and drawer front panels will be 24. Glass for Glazed Doors 3/4" particle core plywood banded with 1/2" x 3/4" matching Tempered hardwood on all sides. A radius lip will be machined around the Laminated Safety entire perimeter of the panels). Style B - Lipped Overlay (Doors will be fully framed with 1-3/4" x 3/4" solid hardwood stiles and rails and the specified veneer will be applied 25. Label Holders (optional) over entire door. Drawer fronts will be solid hardwood match the File drawer only veneer species. A radius lip will be machined around the entire All drawers (including file drawers) perimeter of the panels). All drawers and doors (double doors will receive one)
12. Grain Direction on Doors and Drawer Fronts 26. Number Plates (optional) Combination grain (horizontal on drawer fronts and vertical on Shipped loose for field installation doors)
13. Cabinet Edgebanding
9 2013 WOOD CABINET LINES
M-Line Series
Premium reveal overlay MDF casework that offers an alternative “green friendly” approach to construction. This casework is a wonderful alternative that does not require the use of expensive veneers, plastic laminate materials or painted metal.
Medium Density Fiber board is a listed AWI Premium substrate that can be finished “raw” to provide a stained or painted aesthetic. The result is a unique installation that incorporates the construction methods called out in AWI, but is engineered and fabricated with a cost savings that can be beneficial for any institutional project.
Stretcher rail construction consists Drawer boxes consist of ½" 9-ply of a horizontal front rail and two Baltic birch plywood dove-tailed on vertical back rails that are doweled all 4 joints. The drawer bottom is into the cabinets ends…providing white thermo-fused melamine on ¼" excellent structural rigidity and MDF board, captured on all four sides strength and glued in place. Drawer fronts are applied separately.
A catalyzed vinyl finish is standard. This provides a finish that meets AWI Quality Standards and SEFA 8-1999 Chemical Resistance Specifications. Our finish is All doors will be constructed of ¾" our signature. MDF board
Hardware: various laboratory grade hinges, pulls, drawer slides, locks and catches are used in the cabinet construction (per specification details)
SEFA (Scientific Equipment AWI and AWI Premium construction FSC and NAUF materials Furniture Association)…as a SEFA guidelines and materials are referenced and are available to assist in member, CiF builds our standard followed (with your project specification meeting your project’s cabinets in compliance with all requirements given priority) in casework environmental objectives. SEFA requirements. construction at CiF Lab Solutions.
For materials and construction methods, refer to our specifications. 10 2013 WOOD CABINET LINES
M-Line Wood Casework Options Menu *Options in bold are standard
1. Cabinet Construction 14. Base Cabinet Shelves (Wall and tall cabinet shelves default will be full Full Stretcher Frame depth) Full Sub Top 3/4 depth shelves (open base cabinet shelves will default to full depth) Full depth shelves 2. Intermediate Rails (Intermediate rails will be provided when locks are specified) 15. Drawer Box Construction None Fully dovetailed, 9 ply Baltic Birch, with 1/4" white TFM on MDF Between drawers and between drawers over doors core bottoms Fully dovetailed, 9 ply Baltic Birch, with 1/2" - 9 ply Baltic Birch 3. Doors and Drawer Fronts (The standard is MDF panel doors and drawer plywood bottoms fronts, optional wood doors and drawer fronts are listed). MDF (plain, no veneer) with applied finish 16. Drawer Slides for Standard Drawers Red Oak - Plain Sliced 3/4 extension, nylon roller, epoxy coated, 100 lb. Red Oak - Rift Cut Full extension, ball bearing, zinc, 100 lb. White Oak - Plain Sliced Full extension, ball bearing, epoxy coated, 100 lb. White Oak - Rift Cut Full extension, ball bearing, zinc, 150 lb. White Maple - Plain Sliced White Maple - Quarter Cut 17. Drawer Slides for File Drawers White Birch - Rotary Cut Full extension, nylon roller, epoxy coated, 100 lb. European Steamed Beech - Plain Sliced Full extension, ball bearing, zinc, 100 lb. Natural Bamboo (Edge Grain) Full extension, ball bearing, epoxy coated, 100 lb. Caramelized Bamboo (Edge Grain) Full extension, ball bearing, zinc, 150 lb. Other species and cuts are available upon request 18. Hinges (five knuckle hinges will require a door catch. Both three knuckle 4. Green Options (Options listed can help to contribute to specific LEED and concealed hinges have a self-closing mechanism). points, however the total project requirements must be met in order to Heavy duty, five knuckle - painted achieve the desired LEED points. 100% Recycled and recovered content Heavy duty, five knuckle - brushed chrome only applies to PC and MDF). Medium duty, concealed, 170 open, nickel plated None Medium duty, three knuckle, 270 open, nickel plated NAUF Heavy duty, five knuckle - stainless steel FSC NAUF/FSC 100% Recycled and Recovered Content 19. Door Catches. 100% Recycled and Recovered Content, NAUF Metal roller catch 100% Recycled and Recovered Content, FSC Magnetic catch 100% Recycled and Recovered Content, NAUF/FSC 20. Pulls 5. Cabinet Body Substrate 4" wire pull - aluminum MDF Core 4" wire pull - brushed chrome 4" wire pull - bright chrome 4" wire pull - stainless steel 6. Door and Drawer Substrate (CiF does not recommend using Veneer Core 4" wire pull - painted as a substrate for doors and drawer fronts). Metal flush pull, black MDF Core Metal flush pull, nickel Particleboard Core 4" D pull, aluminum Semi-recessed pull 7. Treatment of Unexposed and Concealed Ends Oversized semi-recessed pull MDF with sealer Other, specify MDF with finish 21. Shelf Supports 8. Cabinet Base Angled Steel Pin Cabinet end to floor Poly-carbonate, seismic type Waterproof fir plywood base 22. Locks (optional) 9. Base Cabinet Backs (Exposed backs will match the finish of the exposed 5 disc cam lock cabinet ends). 5 pin cam lock Semi-exposed: White Hardboard 5 pin dead bolt lock Unexposed (drawer unit): no backs Other, specify Unexposed (drawer units): White Hardboard 23. Keying for Locks 10. Wall and Tall Cabinet Backs (Exposed backs will match the finish of the Keyed alike exposed cabinet ends). Keyed alike per room Semi-exposed: White Hardboard Keyed differently (Security panels will be provided between drawers)
11. Door and Drawer Front Overlay (Reveals between doors and drawer 24. Glass for Glazed Doors fronts on the face of the same cabinet will always be 1/8". Two adjacent Tempered cabinets will have double the reveal when installed side by side). Laminated Safety Reveal Overlay (3/8" reveal on cabinet end) Full Flush Overlay (1/16" reveal on cabinet end) 25. Label Holders (optional) File drawer only 12. Grain Direction on Doors and Drawer Fronts (If applicable) All drawers (including file drawers) Combination grain (horizontal on drawer fronts and vertical on All drawers and doors (double doors will receive one) doors) Vertically matched grain (vertical on drawer fronts and doors, available with reveal overlay and flush overlay). 26. Number Plates (optional) Shipped loose for field installation 13. For Fronts Only Edgebanding 1/8" rolled type banding 1/4" solid stick banding
11 2013 WOOD CABINET LINES
Q-Line Series
Q-Line Series is a high quality, full overlay cabinet system designed for the most demanding environments. The look is clean and modern. Great for any application from classroom to research laboratory to healthcare. Only by using the best in materials and construction details, can you deliver quality and value.
Stretcher rail construction consists Drawer boxes consist of ½" 9-ply of a horizontal front rail and two Baltic birch plywood dove-tailed on all vertical back rails that are doweled 4 joints or 1/2" thick melamine drawer into the cabinets ends…providing sides, hardwood doweled in place. The excellent structural rigidity and drawer bottom is white thermo-fused strength (full sub top is available). melamine on ¼" MDF board, captured on all four sides and glued in place. Drawer fronts are applied separately.
Cabinets are available in high pressure laminate or thermally fused melamine.
All cabinet substrates will consist of M2 or M3 industrial grade engineered particleboard
Door and drawer edges are constructed with highly resilient 3mm PVC, adding durability to your casework Hardware: various laboratory grade investment. hinges, pulls, drawer slides, locks and catches are used in the cabinet construction (per specification details)
SEFA (Scientific Equipment AWI and AWI Premium construction FSC and NAUF materials Furniture Association)…as a SEFA guidelines and materials are referenced and are available to assist in member, CiF builds our standard followed (with your project specification meeting your project’s cabinets in compliance with all requirements given priority) in casework environmental objectives. SEFA requirements. construction at CiF Lab Solutions.
For materials and construction methods, refer to our specifications. 12 2013 WOOD CABINET LINES
Q-Line Laminate Casework Options Menu *Options in bold are standard
1. Cabinet Construction 15. Drawer Box Construction Full Stretcher Frame Fully dovetailed, 9 ply Baltic Birch, with 1/4" white TFM on MDF Full Sub Top core bottoms Fully dovetailed, 9 ply Baltic Birch, with 1/2" - 9 ply Baltic Birch 2. Intermediate Rails (Intermediate rails will be provided when locks are plywood bottoms specified) None 16. Drawer Slides for Standard Drawers Between drawers and between drawers over doors 3/4 extension, nylon roller, epoxy coated, 100 lb. Full extension, ball bearing, zinc, 100 lb. 3. Doors and Drawer Fronts Full extension, ball bearing, epoxy coated, 100 lb. TFM (Thermally Fused Melamine) Full extension, ball bearing, zinc, 150 lb. HPL (High Pressure Plastic Laminate) Acid Resistant HPL (High Pressure Plastic Laminate) 17. Drawer Slides for File Drawers Full extension, nylon roller, epoxy coated, 100 lb. 4. Green Options (Options listed can help to contribute to specific LEED Full extension, ball bearing, zinc, 100 lb. points, however the total project requirements must be met in order to Full extension, ball bearing, epoxy coated, 100 lb. achieve the desired LEED points. 100% Recycled and recovered content Full extension, ball bearing, zinc, 150 lb. only applies to PC and MDF). None 18. Hinges (five knuckle hinges will require a door catch. Both three knuckle NAUF and concealed hinges have a self-closing mechanism). FSC Heavy duty, five knuckle - painted NAUF/FSC Heavy duty, five knuckle - brushed chrome 100% Recycled and Recovered Content Medium duty, concealed, 170 open, nickel plated 100% Recycled and Recovered Content, NAUF Medium duty, three knuckle, 270 open, nickel plated 100% Recycled and Recovered Content, FSC Heavy duty, five knuckle - stainless steel 100% Recycled and Recovered Content, NAUF/FSC 19. Door Catches 5. Cabinet Body Substrate Metal roller catch Particleboard Core Magnetic catch MDF Core 20. Pulls 6. Door and Drawer Substrate (CiF does not recommend using Veneer Core 4" wire pull - aluminum as a substrate for doors and drawer fronts). 4" wire pull - brushed chrome Particleboard Core 4" wire pull - bright chrome MDF Core 4" wire pull - stainless steel 4" wire pull - painted 7. Treatment of Unexposed and Concealed Ends Metal flush pull, black TFM (Thermally Fused Melamine) Metal flush pull, nickel 4" D pull, aluminum Semi-recessed pull 8. Cabinet Base Oversized semi-recessed pull Cabinet end to floor Other, specify Waterproof fir plywood base 21. Shelf Supports 9. Base Cabinet Backs Angled Steel Pin Semi-exposed: White Hardboard Poly-carbonate, seismic type Unexposed (drawer units): no backs Unexposed (drawer units): White Hardboard 22. Locks (optional) 5 disc cam lock 10. Wall and Tall Cabinet Backs 5 pin cam lock Semi-exposed: White Hardboard 5 pin dead bolt lock Other, specify 11. Door and Drawer Front Overlay (Reveals between doors and drawer fronts on the face of the same cabinet will always be 1/8". Two adjacent 23. Keying for Locks cabinets will have double the reveal when installed side by side). Keyed alike Reveal Overlay (3/8" reveal on cabinet end) Keyed alike per room Full Flush Overlay (1/16" reveal on cabinet end, only available with Keyed differently (Security panels will be provided between drawers) concealed hinges) 24. Glass for Glazed Doors 12. Grain Direction on Doors and Drawer Fronts Tempered If wood grain laminate is used combination grain (horizontal on Laminated Safety drawer fronts and vertical on doors) will be provided. 25. Label Holders (optional) 13. Cabinet Edgebanding File drawer only 3mm on doors, drawer fronts and cabinet body 3mm on doors and drawer fronts and 1mm on cabinet body All drawers (including file drawers) All drawers and doors (double doors will receive one) 14. Base Cabinet Shelves (Wall and tall cabinet shelves default will be full depth) 26. Number Plates (optional) 3/4 depth shelves (open base cabinet shelves will default to full Shipped loose for field installation depth) Full depth shelves
13 2013 WOOD CABINET HARDWARE
Contents
Pulls...... 1.02 Hinges...... 1.03 Slides...... 1.03
Locks...... 1.04
Misc...... 1.05
14 2013 1.01 WOOD CABINET HARDWARE
Cabinet Hardware
CAT. NO. DP070 DP190 DP050
Aluminum Wire Pull Stainless Steel Pull Brushed Chrome Pull DESCRIPTION • 4" wide • 4" wide • 4" wide
CAT. NO. DP060 DP170 DP040
Bright Chrome Pull Epoxy Coated Pull Aluminum D Pull DESCRIPTION • 4" wide • 4" wide • 4" wide
CAT. NO. DP110 DP100 DP120
Oversized Semi-Recessed Pull Semi-Recessed Pull Flush Metal Pull - Black DESCRIPTION • ????? • ????? • ?????
CAT. NO. DP130 DP190 A001AStandard location Standard location - flush pulls - wire and D pulls Flush Metal Pull - Nickel Plated Stainless Steel Pull Flush Metal Pull - Black DESCRIPTION Pull Location • ????? • ????? • ?????
1.02 2013 15 WOOD CABINET HARDWARE
Cabinet Hardware
CAT. NO. HH020 HH010 HH040
5-Knuckle Hinge - Painted 5-Knuckle Hinge - Stainless Steel 5-Knuckle Hinge - Brushed Chrome • Hospital tip • Hospital tip • Hospital tip DESCRIPTION • Institutional grade steel hinge • Institutional grade steel hinge • Institutional grade steel hinge • Powder coated • Stainless steel • ????? • Brushed chrome???? • ?????
CAT. NO. HH050 HH080 Concealed Hinge 3-Knuckle Hinge • Self-closing European style • Semi-concealed style with DESCRIPTION hinge with six-way adjustment six-way adjustment • 170° swing • Nickel plated finish • Lifetime warranty • Lifetime warranty
CAT. NO. DS230 DS430 DS100 Single Extension Drawer Slide Full Extension Drawer Slide Full Extension 100 lbs. Ball • Self closing bottom mount style with light • Self closing bottom mount style with light Bearing Drawer Slide - Zinc DESCRIPTION beige epoxy finish beige epoxy finish • Side mounted • 100 lb. load rating • 100 lb. load rating • 100 lb. load rating • Captive roller and positive in-stop • Captive roller and positive in-stop • Zinc plated
CAT. NO. DS150 Full Extension 150 lbs. Ball Bearing Drawer Slide - Zinc DESCRIPTION • Side mounted • 100 lb. load rating • Zinc plated
16 2013 1.03 WOOD CABINET HARDWARE
Cabinet Hardware
CAT. NO. LK010 LK030 LK040
Cabinet Lock 5-Pin Cabinet Lock 5-Pin Dead Bolt • Disc tumbler lock with cam DESCRIPTION • Bright chrome • Removable core lock system • Bright chrome
CAT. NO. LK020 LK050 LK060 Sliding Glass Door Lock 3-Point Lock Plunger Lock • Bright chrome • Provides locking at top, bottom • Provides locking for solid or framed DESCRIPTION • Bright chrome and centre for tall cabinets. • sliding doors • Bright chrome • Bright chrome • Bright chrome
CAT. NO. MC010 RC010 EC010
Magnetic Catch Metal Roller Catch Elbow Catch DESCRIPTION • Includes metal base plate • ????? • ?????
CAT. NO. CP200 CS010 Lock Location
Chain Pull Chain Stop DESCRIPTION • ????? • ?????
1.04 2013 17 WOOD CABINET HARDWARE
Cabinet Hardware
CAT. NO. SC220 SC240 Metal Shelf Clip Poly-Carbonate - Seismic Shelf Clip DESCRIPTION • Nickel plated steel “L" shaped clip • • Molded plastic w/two integral pins ??? • Locking design fits 3/4" or 1" shelves
CAT. NO. NP010 KV710 LV010 Number Plates Label Holder Cabinet Levelers • Aluminum shipped loose • 3 1/2 x 1 3/4" overall size • Cabinet leveler with protective DESCRIPTION • ????? • Holds label cards 2 15/16" x 1 1/2" nylon glide• ????? • ??? • Anchrome finish • ???
CAT. NO. HK710 HK800 HK810
Double Coat Hook Double Coat Hook Single Coat Hook DESCRIPTION • Wall mount • Ceiling mount • Wall mount
CAT. NO. HK820 MR010
Double Coat Hook Wardrobe Mirror DESCRIPTION • Wall mount • 10" x 12"
18 2013 1.05 WOOD BASE CABINETS
Contents
General Storage Base Cabinets...... 2.02-2.07 Corner Base Cabinets...... 2.08 Tote Tray Storage Base Cabinet...... 2.09
Sink And Utility Base Cabinets...... 2.10
Fume Hood Base Cabinets...... 2.11 Acid And Flammable Storage Base Cabinets...... 2.12-2.13 Vacuum Pump Storage Base Cabinets...... 2.14
2013 19 2.01 WOOD BASE CABINETS
General Storage Base Cabinets
CAT. NO. B0000
Open Cabinet DESCRIPTION • One adjustable shelf
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 22 WIDTH: INCHES 15 18 21 24 30 36 42 48 WIDTH: MM 381 457 533 610 762 914 1067 1219
CAT. NO. B0110 (Hinged L) B0120 (Hinged R) B0100 B0840 Storage w/Door Storage w/Doors Sliding Door Storage DESCRIPTION • One adjustable shelf • One adjustable shelf • One adjustable shelf • One hinged door • Two hinged doors • Two sliding doors HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 22 WIDTH: INCHES 15 18 21 24 30 36 42 48 30 36 42 48 WIDTH: MM 381 457 533 610 762 914 1067 1219 762 914 1067 1219
CAT. NO. B3110 (Hinged L) B3120 (Hinged R) B3000 B3100 Door/Drawer Storage Door/Drawer Storage Door/Drawer Storage • One adjustable shelf • One adjustable shelf • One adjustable shelf DESCRIPTION • One drawer • One drawer • Two drawers • One hinged door • Two hinged doors • Two hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 15 18 21 24 30 36 42 48 30 36 42 48 WIDTH: MM 381 457 533 610 762 914 1067 1219 762 914 1067 1219
2.02 201320 WOOD BASE CABINETS
General Storage Base Cabinets
CAT. NO. B3170 B3310 (Hinged L) B3320 (Hinged R) B0170 (Hinged L) B0180 (Hinged R)
Door/Drawer Storage Door/Drawer Storage Door Storage DESCRIPTION • w/center divider • w/pull board • w/pull board
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 15 18 21 24 15 18 21 24 WIDTH: MM 762 914 1067 1219 381 457 533 610 381 457 533 610
CAT. NO. B3240 B3250 (Hinged L) B3260 (Hinged R)
Door/Drawer Storage Door/Drawer Storage DESCRIPTION • w/two drawers • w/one drawer
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 WIDTH: INCHES 30 36 42 48 15 18 21 24 WIDTH: MM 762 914 1067 1219 381 457 533 610
CAT. NO. B3270 B3440 B3400 Door/Drawer Storage Door/Drawer Storage Door/Drawer Storage • w/center divider • One adjustable shelf • One adjustable shelf DESCRIPTION • Three drawers • Four drawers • Two hinged doors • Two hinged doors HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
2013 21 2.03 WOOD BASE CABINETS
General Storage Base Cabinets
CAT. NO. B3450 B3180 B5410 Door/Drawer Storage Door/Drawer Storage Door/Drawer Storage • One adjustable shelf • One adjustable shelf DESCRIPTION • One adjustable shelf • Two drawers • Five drawers • Three top drawers and three doors • Two hinged doors • One hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 914 1067 1219 762 914 1067 1219
CAT. NO. B5420 B6310 B6320 Door/Drawer Storage Door/Drawer Storage Door/Drawer Storage • One adjustable shelf • One adjustable shelf • One adjustable shelf DESCRIPTION • Five drawers • Three drawers • Three drawers • One hinged door • One hinged door • One hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
CAT. NO. B6410 B6420 B6330 Door/Drawer Storage Door/Drawer Storage Door/Drawer Storage • One adjustable shelf • One adjustable shelf • One adjustable shelf DESCRIPTION • Four drawers • Four drawers • Four drawers • One hinged door • One hinged door • One hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
2.04 201322 WOOD BASE CABINETS
General Storage Base Cabinets
CAT. NO. B6340 B6230 B6240 Door/Drawer Storage Door/Drawer Storage Door/Drawer Storage • One adjustable shelf • One adjustable shelf • One adjustable shelf DESCRIPTION • Four drawers • Three drawers • Three drawers • One hinged door • One hinged door • One hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
CAT. NO. B6370 B6380 B6470 Door/Drawer Storage Door/Drawer Storage Door/Drawer Storage • One adjustable shelf • One adjustable shelf • One adjustable shelf DESCRIPTION • Six drawers • Six drawers • Seven drawers • One hinged door • One hinged door • One hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
CAT. NO. B6480 B4030 B4040 Door/Drawer Storage Drawer Storage Drawer Storage • One adjustable shelf • Three drawers • Four drawers DESCRIPTION • Seven drawers • One hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 15 18 21 24 30 36 42 48 15 18 21 24 30 36 42 48 WIDTH: MM 762 914 1067 1219 381 457 533 610 762 914 1067 1219 381 457 533 610 762 914 1067 1219
2013 23 2.05 WOOD BASE CABINETS
General Storage Base Cabinets
CAT. NO. B4050 B4080 B4240
Drawer Storage Drawer Storage Drawer Storage DESCRIPTION • Five drawers • Eight drawers • Five drawers
HEIGHT: INCHES 32 3/4 (ADA) 35 (Standing) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 15 18 21 24 15 18 21 24 30 36 42 48 WIDTH: MM 381 457 533 610 381 457 533 610 762 914 1067 1219
CAT. NO. B4480 B4380 B4410
Drawer Storage Drawer Storage Drawer Storage DESCRIPTION • Six drawers • Sixteen drawers • Seven drawers
HEIGHT: INCHES 32 3/4 (ADA) 35 (Standing) 35 (Standing) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
CAT. NO. B4420 B4490 B4330
Drawer Storage Drawer Storage Drawer Storage DESCRIPTION • Seven drawers • Eight drawers • Six drawers
HEIGHT: INCHES 35 (Standing) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
2.06 201324 WOOD BASE CABINETS
General Storage Base Cabinets
CAT. NO. B4340 B3580 B3590
Eight Drawer Storage Door/Drawer Storage Door/Drawer Storage DESCRIPTION • Eight drawers • Six drawers with center door • Six drawers with center door
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 36 42 48 36 42 48 WIDTH: MM 762 914 1067 1219 914 1067 1219 914 1067 1219
CAT. NO. B4210 B4220 B4430
Drawer Storage Drawer Storage Drawer Storage DESCRIPTION • Six drawers • Six drawers • Five drawers
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 15 18 21 24 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 381 457 533 610
CAT. NO. B4500 B4540 File Drawer Storage File Drawer Storage DESCRIPTION • Two file-size drawers • Three drawers including one file-size drawer • Hanging file folders not included • Hanging file folders not included HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 WIDTH: INCHES 15 18 21 24 15 18 21 24 WIDTH: MM 381 457 533 610 381 457 533 610
2013 25 2.07 WOOD BASE CABINETS
Corner Base Cabinets
CAT. NO. B0210 B0220 Blind Corner Blind Corner DESCRIPTION • One adjustable shelf • One adjustable shelf • One hinged door • One hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 WIDTH: INCHES 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219
CAT. NO. X1210 (Hinged L) X1220 (Hinged R) 45 Degrees Corner Cabinet DESCRIPTION • One adjustable shelf • One hinged door HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 WIDTH: INCHES 32 WIDTH: MM 813
CAT. NO. B4420 B4490 B4330
Drawer Storage Drawer Storage Drawer Storage DESCRIPTION • ????? • ????? • ?????
HEIGHT 34 3/4 (Standing) 34 3/4 (Standing) 28 3/4 (Sitting) 33 (ADA) 34 3/4 (Standing) DEPTH 22 22 22 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
2.08 201326 WOOD BASE CABINETS
Tote Tray Storage Cabinets
CAT. NO. B1540 B1440 Tote Tray Cabinet Tote Tray Cabinet DESCRIPTION • Three fixed vertical partitions • Two fixed vertical partitions
HEIGHT: INCHES 35 (Standing) 35 (Standing) DEPTH: INCHES 23 23 WIDTH: INCHES 48 36 WIDTH: MM 1219 914
CAT. NO.
DESCRIPTION
HEIGHT DEPTH WIDTH: INCHES WIDTH: MM
CAT. NO. B4420 B4490 B4330
Drawer Storage Drawer Storage Drawer Storage DESCRIPTION • ????? • ????? • ?????
HEIGHT 34 3/4 (Standing) 34 3/4 (Standing) 28 3/4 (Sitting) 33 (ADA) 34 3/4 (Standing) DEPTH 22 22 22 WIDTH: INCHES 30 36 42 48 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 762 914 1067 1219
2013 27 2.09 WOOD BASE CABINETS
Sink and Utility Base Cabinets
CAT. NO. B2110 (Hinged L) B2120 (Hinged R) B2100 B2750
Single Door Sink Cabinet Sink Cabinet w/Doors Sink Cabinet DESCRIPTION • No shelf • No shelf • No shelf, w/kick returns
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 35 (Standing)) DEPTH: INCHES 23 23 23 WIDTH: INCHES 15 18 21 24 30 36 42 48 46 52 58 WIDTH: MM 381 457 533 610 762 914 1067 1219 1168 1321 1473
CAT. NO. B2790 D1010
Sink Cabinet DESCRIPTION Knee Space Sink Panel • No shelf, w/kick returns
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 27 DEPTH: INCHES 23 23 WIDTH: INCHES 46 52 58 30 36 42 48 WIDTH: MM 1168 1321 1473 762 914 1067 1219
CAT. NO. D1060
ADA Convertible Sink Cabinet DESCRIPTION • Pocket doors
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 WIDTH: INCHES 36 42 WIDTH: MM 914 1067
2.10 201328 WOOD BASE CABINETS
Fume Hood Base Cabinets
CAT. NO. B2600 B2610 (Hinged L) B2620 (Hinged R)
Fume Hood Cabinet Fume Hood Cabinet DESCRIPTION • Unlined • Unlined
HEIGHT: INCHES 32 3/4 (ADA) 35 (Standing) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 WIDTH: INCHES 30 36 42 48 12 18 24 WIDTH: MM 762 914 1067 1219 305 457 610
CAT. NO.
DESCRIPTION
HEIGHT DEPTH WIDTH: INCHES WIDTH: MM
CAT. NO.
DESCRIPTION
HEIGHT DEPTH WIDTH: INCHES WIDTH: MM
2013 29 2.11 WOOD BASE CABINETS
Acid Storage Base Cabinets
CAT. NO. SC210 SC211 (Hinged L) SC212 (Hinged R) SC260 Acid Storage Acid Storage Acid Storage • Polypropylene lined, w/epoxy coated • Polypropylene lined, w/epoxy coated • Polypropylene lined, w/epoxy coated DESCRIPTION ventilated metal shelf and stainless steel ventilated metal shelf and stainless steel ventilated metal shelf and stainless steel hardware with flush top panel hardware with flush top panel hardware with recessed top panel HEIGHT: INCHES 32 3/4 (ADA) 35 (Standing) 32 3/4 (ADA) 35 (Standing) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 30 36 42 48 18 24 30 36 42 48 WIDTH: MM 762 914 1067 1219 457 610 762 914 1067 1219
CAT. NO. SC261 (Hinged L) SC262 (Hinged R) SC230 SC231 (Hinged L) SC232 (Hinged R) Acid Storage Acid Storage Acid Storage • Polypropylene lined, w/epoxy coated • Polypropylene lined, w/epoxy coated • Polypropylene lined, w/epoxy coated DESCRIPTION ventilated metal shelf and stainless steel ventilated metal shelf and stainless steel ventilated metal shelf and stainless steel hinges w/recessed top panel hinges hinges HEIGHT: INCHES 32 3/4 (ADA) 35 (Standing) 32 3/4 (ADA) 35 (Standing) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 18 24 30 36 42 48 18 24 WIDTH: MM 457 610 762 914 1067 1219 457 610
CAT. NO.
DESCRIPTION
CAT.HEIGHT NO. SCV00 DEPTH DESCRIPTION Vent Kit WIDTH: INCHES WIDTH: MM
2.12 201330 WOOD BASE CABINETS
UL Listed Wood Flammable Storage Base Cabinets
CAT. NO. SC311 (Hinged L) SC312 (Hinged R) SC310 UL Listed Wood Flammable Storage Cabinet UL Listed Wood Flammable Storage Cabinet DESCRIPTION • Doors are made to match the wood veneer • Double doors are made to match the wood • species of your project. • veneer species of your project. HEIGHT: INCHES 28 35 28 35 DEPTH: INCHES 18 22 18 22 WIDTH: INCHES 24 30 36
2013 31 2.13 WOOD BASE CABINETS
Vacuum Pump Storage Base Cabinets
CAT. NO. BVC10 (Hinged L) BVC20 (Hinged R) BVC00 Vacuum Pump Storage Cabinet Vacuum Pump Storage Cabinet Vacuum Pump Storage Cabinet • Lined with 1" sound deadening foam material • Lined with 1" sound deadening foam material • Double doors • One pull out shelf with polypropylene lined • One pull out shelf with polypropylene lined • Lined with 1" sound deadening foam material DESCRIPTION bottom bottom • One pull out shelf with polypropylene lined • One vent outlet in back • One vent outlet in back bottom • Switched receptacle 120V • Switched receptacle 120V • One vent outlet in back • Switched receptacle 120V HEIGHT: INCHES 32 3/4 (ADA) 35 (Standing) 32 3/4 (ADA) 35 (Standing) 32 3/4 (ADA) 35 (Standing) DEPTH: INCHES 23 23 23 WIDTH: INCHES 24 30 36 24 30 36 24 30 36
2.14 201332 WOOD WALL CABINETS
Contents
General Storage Wall Cabinets...... 3.02 Corner Wall Cabinets...... 3.03
2013 33 3.01 WOOD WALL CABINETS
General Storage Wall Cabinets
CAT. NO. W0000 W0110 (Hinged L) W0120 (Hinged R) W0100 Storage w/Door Storage w/Doors Open Storage DESCRIPTION • Adjustable shelves • Adjustable shelves / 12" high - no shelf • Adjustable shelves • One hinged door • One hinged door HEIGHT: INCHES 24 30 36 48 24 30 36 48 12 24 30 36 48 HEIGHT: MM 610 762 914 1219 610 762 914 1219 305 610 762 914 1219 DEPTH: INCHES 12 15 13 16 13 16 DEPTH: MM 305 381 330 406 330 406 WIDTH: INCHES 15 18 21 24 30 36 42 48 15 18 21 24 30 36 42 48 WIDTH: MM 381 457 533 610 762 914 1067 1219 381 457 533 610 762 914 1067 1219
CAT. NO. W0840 W0310 (Hinged L) W0320 (Hinged R) W0300 Storage w/Sliding Doors Storage w/Framed Glazed Door Storage w/Framed Glazed Doors DESCRIPTION • Adjustable shelves • Adjustable shelves • Adjustable shelves • Two sliding doors on overhead track HEIGHT: INCHES 24 30 36 48 24 30 36 48 24 30 36 48 HEIGHT: MM 610 762 914 1219 610 762 914 1219 610 762 914 1219 DEPTH: INCHES 12 15 13 16 13 16 DEPTH: MM 305 381 330 406 330 406 WIDTH: INCHES 30 36 42 48 15 18 21 24 30 36 42 48 WIDTH: MM 762 914 1067 1219 381 457 533 610 762 914 1067 1219
CAT. NO. W0860 W0870
Storage w/Framed Glazed Sliding Doors Storage w/Unframed Glazed Sliding Door DESCRIPTION • Adjustable shelves • Adjustable shelves
HEIGHT: INCHES 24 30 36 48 24 30 36 48 HEIGHT: MM 610 762 914 1219 610 762 914 1219 DEPTH: INCHES 12 15 12 15 DEPTH: MM 305 381 305 381 WIDTH: INCHES 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219 3.02 201334 WOOD WALL CABINETS
Corner Wall Cabinets
CAT. NO. W0210 W0220 W0270 (Hinged L) Blind Corner Storage Blind Corner Storage Blind Corner Storage W/Framed Glazed • Adjustable shelf or shelves depending on • Adjustable shelf or shelves depending on Door DESCRIPTION height height • Adjustable shelf or shelves depending on • One hinged door • One hinged door height HEIGHT: INCHES 24 30 36 48 24 30 36 48 24 30 36 48 HEIGHT: MM 610 762 914 1219 610 762 914 1219 610 762 914 1219 DEPTH: INCHES 13 16 13 16 13 16 DEPTH: MM 330 406 330 406 330 406 WIDTH: INCHES 30 36 48 30 36 48 30 36 48 WIDTH: MM 762 914 1219 762 914 1219 762 914 1219
CAT. NO. W0280 (Hinged R) Y1210 (Hinged L) Y1220 (Hinged R) Blind Corner Storage Angled Corner Wall Cabinet DESCRIPTION • Adjustable shelf or shelves depending on • 45-degree door and unit is always square height • Adjustable shelf or shelves HEIGHT: INCHES 24 30 36 48 24 30 36 48 HEIGHT: MM 610 762 914 1219 610 762 914 1219 DEPTH: INCHES 13 16 13 16 DEPTH: MM 330 406 330 406 WIDTH: INCHES 30 36 48 24 27 WIDTH: MM 762 914 1219 610 686
CAT. NO. Y1270 (Hinged L) Y1280 (Hinged R) Angled Corner Wall Cabinet W/Framed Glazed Door DESCRIPTION • Adjustable shelf or shelves depending on height HEIGHT: INCHES 24 30 36 48 HEIGHT: MM 610 762 914 1219 DEPTH: INCHES 13 16 DEPTH: MM 330 406 WIDTH: INCHES 24 27 WIDTH: MM 610 686 2013 35 3.03 WOOD TALL CABINETS
Contents
General Storage Tall Cabinets...... 4.02-4.04 Tote Tray Storage Cabinets...... 4.05 Wardrobe Storage Tall Cabinets...... 4.06
Special Purpose Tall Cabinets...... 4.07-4.08
36 2013 4.01 WOOD TALL CABINETS
General Storage Tall Cabinets
CAT. NO. T0000 T0110 (Hinged L) T0120 (Hinged R) T0100 Storage w/Door Storage w/Doors Open Storage • Four adjustable shelves • Four adjustable shelves DESCRIPTION • Four adjustable shelves • One hinged doors • Two hinged doors • One centered fixed shelf • One centered fixed shelf • One centered fixed shelf HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 12 15 22 13 16 23 13 16 23 DEPTH: MM 305 381 559 330 406 584 330 406 584 WIDTH: INCHES 15 18 21 24 30 36 42 48 15 18 21 24 30 36 42 48 WIDTH: MM 381 457 533 610 762 914 1067 1219 381 457 533 610 762 914 1067 1219
CAT. NO. T0840 T0310 (Hinged L) T0320 (Hinged R) T0300 Storage w/Sliding Doors Storage w/Framed Glazed Door Storage w/Framed Glazed Doors • Four adjustable shelves DESCRIPTION • Four adjustable shelves • Four adjustable shelves • One centered fixed shelf • One centered fixed shelf • One centered fixed shelf • Two sliding doors on overhead track HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 12 15 22 13 16 23 13 16 23 DEPTH: MM 305 381 559 330 406 584 330 406 584 WIDTH: INCHES 30 36 42 48 15 18 21 24 30 36 42 48 WIDTH: MM 762 914 1067 1219 381 457 533 610 762 914 1067 1219
4.02 2013 37 WOOD TALL CABINETS
General Storage Tall Cabinets
CAT. NO. T0860 T0160 T0510 (Hinged L) T0520 (Hinged R) Storage w/Split Doors Storage w/Split Doors Storage w/Framed Glazed Sliding Doors • Four adjustable shelves • Four adjustable shelves • Four adjustable shelves DESCRIPTION • One centered fixed shelf • One fixed shelf • One centered fixed shelf • Four hinged doors • Two hinged doors • Door split at fixed shelf • Door split at fixed shelf HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 12 15 22 13 16 23 13 16 23 DEPTH: MM 305 381 559 330 406 584 330 406 584 WIDTH: INCHES 30 36 42 48 30 36 42 48 15 18 21 24 WIDTH: MM 762 914 1067 762 914 1067 1219 381 457 533 610
CAT. NO. T0850 T0370 (Hinged L) T0380 (Hinged R) T0390
DESCRIPTION Storage w/Split Sliding Doors Storage w/Split Framed Glazed Door Storage w/Split Framed Glazed Doors
HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 12 15 22 13 16 23 13 16 23 DEPTH: MM 305 381 559 330 406 584 330 406 584 WIDTH: INCHES 30 36 42 48 15 18 21 24 30 36 42 48 WIDTH: MM 762 914 1067 1219 381 457 533 610 762 914 1067 1219
38 2013 4.03 WOOD TALL CABINETS
General Storage Tall Cabinets
CAT. NO. T0360 T0350
DESCRIPTION Storage w/Split Door Storage w/Split Door
HEIGHT: INCHES 84 84 HEIGHT: MM 2134 2134 DEPTH: INCHES 12 15 22 12 15 22 DEPTH: MM 305 381 559 305 381 559 WIDTH: INCHES 30 36 42 48 30 36 42 48 WIDTH: MM 762 914 1067 1219 762 914 1067 1219
CAT. NO. ????? ????? ?????
????????????????? ????????????????? ????????????????? DESCRIPTION • ????? • ????? • ?????
HEIGHT: INCHES HEIGHT: MM DEPTH: INCHES DEPTH: MM WIDTH: INCHES WIDTH: MM
4.04 2013 39 WOOD TALL CABINETS
Tote Tray Storage Tall Cabinets
CAT. NO. T1490 T1590
Tote Tray Storage w/Doors Tote Tray Storage w/Doors DESCRIPTION • 40 tote trays • 48 tote trays
HEIGHT: INCHES 84 84 HEIGHT: MM 2134 2134 DEPTH: INCHES 23 23 DEPTH: MM 584 584 WIDTH: INCHES 48 48 WIDTH: MM 1219 1219
CAT. NO. ????? ????? ?????
????????????????? ????????????????? ????????????????? DESCRIPTION • ????? • ????? • ?????
HEIGHT: INCHES HEIGHT: MM DEPTH: INCHES DEPTH: MM WIDTH: INCHES WIDTH: MM
40 2013 4.05 WOOD TALL CABINETS
Wardrobe Storage Tall Cabinets
T2740 (Shown Above) T2780 (Shown Above) CAT. NO. T2310 (Hinged L) T2320 (Hinged R) T2640 (Mirror Image Of Above Internal Layout) T2800 (Mirror Image Of Above Internal Layout) Wardrobe w/2 File Drawers, Wardrobe w/Hanging Rod Wardrobe w/Hanging Rod and Shelves Mirror, Hanging Rod and Shelves • One fixed shelf • Four adjustable selves and two fixed shelves • Three adjustable selves and one fixed shelf • One hinged door • One hanger rod and one pin tray DESCRIPTION • One hanger rod and one pin tray • One hanger rod • Mirror mounted on right door • Mirror mounted on left door • Two hinged doors • Two letter-size file drawers • Two hinged doors HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 23 23 23 DEPTH: MM 584 584 584 WIDTH: INCHES 24 30 48 36 48 WIDTH: MM 610 762 1219 914 1219
4.06 2013 41 WOOD TALL CABINETS
Special Purpose Tall Cabinets
CAT. NO. T0780 (Hinged L) T0790 (Hinged R) T0870 (Hinged L) T0880 (Hinged R) T4710 (Hinged L) T4720 (Hinged R)
Skeleton Closet Skeleton Closet Torso Closet DESCRIPTION • w/hinged glass door and pull-out hanger • w/hinged glass door, open floor • w/hinged glass door and pull-out hanger
HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 16 16 16 DEPTH: MM 406 406 406 WIDTH: INCHES 24 24 24 WIDTH: MM 610 610 610
CAT. NO. T4670 (Hinged L) T4680 (Hinged R) T0950 (Hinged L) T0960 (Hinged R) T0330
Tubing Storage Cabinet Microscope Cabinet Microscope/Apparatus Cabinet DESCRIPTION • w/glass door • w/glass door • w/glass doors
HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 16 16 16 23 DEPTH: MM 406 406 406 584 WIDTH: INCHES 24 24 36 48 WIDTH: MM 610 610 914 1219
42 2013 4.07 WOOD TALL CABINETS
Special Purpose Tall Cabinets
CAT. NO. X1061 X1041 SC290 Safety Cabinet Barrier Free (ADA) Safety Station Vented Lined Acid Storage DESCRIPTION • w/plastic laminate top. Shower and • w/plastic laminate top. Shower and • w/stainless steel duct stub eyewash are not included eyewash are not included HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 23 22 23 DEPTH: MM 584 559 584 WIDTH: INCHES 36 48 36 48 36 48 WIDTH: MM 914 1219 914 1219 914 1219
CAT. NO. ????? ????? ?????
????????????????? ????????????????? ????????????????? DESCRIPTION • ????? • ????? • ?????
HEIGHT: INCHES HEIGHT: MM DEPTH: INCHES DEPTH: MM WIDTH: INCHES WIDTH: MM
4.08 2013 43 WOOD FILLERS & PANELS/KNEE SPACES
Contents
Base Fillers...... 5.02-5.03 Wall Fillers...... 5.04 Tall Fillers...... 5.05-5.06
Knee Spaces, Valances, Aprons, And Book Boxes...... 5.07
44 2013 5.01 WOOD FILLERS & PANELS/KNEE SPACES
Base Fillers
CAT. NO. R1200 R1230 R1250 Base Scribing Filler With Metal Kick Plate Solid 1-Inch Wood Base Filler Base Corner Filler With Metal Kick Plate • Shown with metal kick plate. Order • Shown with metal kick plate. Order DESCRIPTION • order seperately if needed.?? • order seperately if needed.? • Small panels will be consolidated to 24-inch • wide panels for field cutting
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing)
WIDTH: INCHES 2-48 1 3-12 WIDTH: MM 50-1219 25 75-305
CAT. NO. R1210 F4101 R2180 Base End Filler Base Cabinet Finished Back Panel Island End Gable Panel DESCRIPTION
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) WIDTH: INCHES 2-24 15 18 21 24 30 36 42 48 46 52 58 WIDTH: MM 50-610 381 457 533 610 762 914 1067 1219 1168 1321 1473
CAT. NO. R2100 R2150 R2070 DESCRIPTION End Gable Panel End Gable Panel End Gable Panel With Scoop Design HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 32 3/4 (ADA) 35 (Standing) WIDTH: INCHES 22 23 29 35 22 23 29 35 22 23 29 35 WIDTH: MM 559 584 737 889 559 584 737 889 559 584 737 889
5.02 2013 45 WOOD FILLERS & PANELS/KNEE SPACES
Base Fillers
CAT. NO. MTK10 MTK20 Metal Kick Plate Metal Kick Corner DESCRIPTION • Galvanized metal • Galvanized metal HEIGHT: INCHES 3 3/4 3 3/4 WIDTH: INCHES 6 8 x 8
46 2013 5.03 WOOD FILLERS & PANELS/KNEE SPACES
Wall Fillers
CAT. NO. R1000 R1030 R1050 Wall Scribing Filler Solid 1-Inch Wood Wall Filler Wall Corner Filler DESCRIPTION • Shipped unassembled• ? • Shipped unassembled• ? • Shipped unassembled• ? • ????? • ????? • ????? HEIGHT: INCHES 12 24 30 36 48 12 24 30 36 48 24 30 36 48 HEIGHT: MM 305 610 762 914 1219 305 610 762 914 1219 610 762 914 1219 DEPTH: INCHES 12 15 12 15 12 15 DEPTH: MM 305 381 305 381 305 381 WIDTH: INCHES 2-48 1 3-12 WIDTH: MM 50-610 25 75-305
CAT. NO. F4090 Wall Cabinet Finished Back And Bottom DESCRIPTION Edge • HEIGHT: INCHES 24 30 36 48 HEIGHT: MM 610 762 914 1219 DEPTH: INCHES DEPTH: MM WIDTH: INCHES 15 18 21 24 30 36 42 48 WIDTH: MM 381 457 533 610 762 914 1067 1219
5.04 2013 47 WOOD FILLERS & PANELS/KNEE SPACES
Tall Fillers
CAT. NO. R1300 R1330 R1350 Solid 1-Inch Wood Tall Filler Tall Cabinet Corner Filler Tall Cabinet Front Filler Panel With Metal Kick Plate Panel With Metal Kick Plate DESCRIPTION • Shown with metal kick plate. Order • Shown with metal kick plate. Order seperately if required. seperately if required. • Shipped unassembled HEIGHT: INCHES 84 84 84 HEIGHT: MM 2134 2134 2134 DEPTH: INCHES 12 15 22 12 15 22 16 21 DEPTH: MM 305 381 559 305 381 559 406 533 WIDTH: INCHES 2-48 1 3-12 WIDTH: MM 50-1219 25 75-305
CAT. NO. R1310 F4101
Tall Cabinet End Filler Panel Tall Cabinet Finished Back Panel DESCRIPTION • •
HEIGHT: INCHES 84 84 HEIGHT: MM 2134 2134 WIDTH: INCHES 2-24 15 18 21 24 30 36 42 48 WIDTH: MM 50-610 381 457 533 610 762 914 1067 1219
48 2013 5.05 WOOD FILLERS & PANELS/KNEE SPACES
Tall Fillers
CAT. NO. MTK10 MTK20 Front Toe Kick Filler Panel Corner Toe Kick Filler Panel DESCRIPTION • Galvanized Metal • Galvanized Metal HEIGHT: INCHES 3 3/4 3 3/4 WIDTH: INCHES 6 8 x 8
2013 49 5.06 WOOD FILLERS & PANELS/KNEE SPACES
Knee Spaces, Valances, Aprons, And Book Boxes
CAT. NO. R2200 R2300 R3300
Knee Space Full Height Panel Light Valance Knee Space Rail DESCRIPTION • ????? • ?????
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 4 3 3/4 WIDTH: INCHES 15 18 21 24 30 36 42 48 15 18 21 24 30 36 42 48 15 18 21 24 30 36 42 48 WIDTH: MM 381 457 533 610 762 914 1067 1219 381 457 533 610 762 914 1067 1219 381 457 533 610 762 914 1067 1219
CAT. NO. R2202 B4740 B4840 Knee Space Panel For Below Single Knee Space Drawer Double Knee Space Drawer DESCRIPTION Rail, Drawer Or Book Box • ?????
HEIGHT: INCHES 25 1/4 (Sitting) 29 (ADA) 31 1/4 (Standing) 3 7/8 3 7/8 DEPTH: INCHES 23 23 WIDTH: INCHES 15 18 21 24 30 36 42 48 18 21 24 30 36 42 48 WIDTH: MM 381 457 533 610 762 914 1067 1219 457 533 610 762 914 1067 1219
CAT. NO. X2000 X2070 D1010
DESCRIPTION Book Box • ????? Divided Book Box ??? Knee Space Sink Panel
HEIGHT: INCHES 3 7/8 3 7/8 27 DEPTH: INCHES 23 23 23 WIDTH: INCHES 18 21 24 30 36 42 48 30 36 42 48 WIDTH: MM 457 533 610 762 914 1067 1219 762 914 1067 1219
5.07 201350 WOOD TABLES
Contents
Table Frames And Legs...... 6.02-6.03
2013 51 6.01 WOOD TABLES
• ADA and sitting height tables will have a 3-3/4 inch rails all around. • Standing height tables will have a 4-5/8 inch rails all around. • Stretcher rails will not be provided unless requested. Wood Tables • We recommend stretchers for tables over 48-inches wide.
CAT. NO. D6150 D6151 D6152
Table Frame Table Frame With One Drawer Table Frame With Two Drawers DESCRIPTION
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 35 (Standing) 29 (Sitting) 35 (Standing) HEIGHT: MM 737 832 889 737 889 737 889 DEPTH: INCHES 22 28 22 28 22 28 DEPTH: MM 559 711 559 711 559 711 WIDTH: INCHES 22 28 34 40 46 58 70 22 28 34 40 46 58 70 WIDTH: MM 559 711 864 1016 1168 1473 1778 559 711 864 1016 1168 1473 1778
CAT. NO. D6170 D6171 D6172
Table Frame - Right Legs Table Frame With One Drawer - Right Legs Table Frame With Two Drawers - Right Legs DESCRIPTION
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 35 (Standing) 29 (Sitting) 35 (Standing) HEIGHT: MM 737 832 889 737 889 737 889 DEPTH: INCHES 22 28 22 28 22 28 DEPTH: MM 559 711 559 711 559 711 WIDTH: INCHES 24 30 36 42 48 60 72 24 30 36 42 48 60 72 WIDTH: MM 610 762 914 1067 1219 1524 1829 610 762 914 1067 1219 1524 1829
CAT. NO. D6160 D6161 D6162
Table Frame - Left Legs Table Frame With One Drawer - Left Legs Table Frame With Two Drawer(s) - Left Legs DESCRIPTION
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) 29 (Sitting) 35 (Standing) 29 (Sitting) 35 (Standing) HEIGHT: MM 737 832 889 737 889 737 889 DEPTH: INCHES 22 28 22 28 22 28 DEPTH: MM 559 711 559 711 559 711 WIDTH: INCHES 24 30 36 42 48 60 72 24 30 36 42 48 60 72 WIDTH: MM 610 762 914 1067 1219 1524 1829 610 762 914 1067 1219 1524 1829
6.02 201352 WOOD TABLES
Wood Tables
CAT. NO. D6140 D6141 D6142
Table Frame - No Legs Table Frame One Drawer - No Legs Table Frame With Two Drawers - No Legs DESCRIPTION
HEIGHT: INCHES 3 3/4 (Sitting and ADA) 4 5/8 (Standing) 3 3/4 (Sitting and ADA) 4 5/8 (Standing) 3 3/4 (Sitting and ADA) 4 5/8 (Standing) HEIGHT: MM 95 117 95 117 95 117 DEPTH: INCHES 22 28 22 28 22 28 DEPTH: MM 559 711 559 711 559 711 WIDTH: INCHES 24 30 36 42 48 60 72 24 30 36 42 48 60 72 WIDTH: MM 610 762 914 1067 1219 1524 1829 610 762 914 1067 1219 1524 1829
CAT. NO. D6191
Table Leg - End DESCRIPTION
HEIGHT: INCHES 29 (Sitting) 32 3/4 (ADA) 35 (Standing) HEIGHT: MM 737 832 889
2013 53 6.03 WOOD SUSPENDED AND MOBILE CABINETS
Contents
General Storage Mobile Cabinets...... 7.02-7.03 General Storage Suspended Cabinets...... 7.04-7.06
54 2013 7.01 WOOD SUSPENDED AND MOBILE CABINETS
General Storage Mobile Cabinets
CAT. NO. U0110 (Hinged L) U0120 (Hinged R) U0100 U3100
Storage w/Door Storage w/Doors Door/Drawer Storage DESCRIPTION • Top not included • Top not included • Top not included
HEIGHT: INCHES 24 28 (Does not include work surface) 24 28 (Does not include work surface) 24 28 (Does not include work surface) HEIGHT: MM 610 711 610 711 610 711 DEPTH: INCHES 20 23 (Does not include work surface) 20 23 (Does not include work surface) 20 23 (Does not include work surface) DEPTH: MM 508 584 508 584 508 584 WIDTH: INCHES 21 30 36 30 36 WIDTH: MM 533 762 914 762 914
CAT. NO. U3110 (Hinged L) U3120 (Hinged R) U4020 U4030
Door/Drawer Storage Two Drawer Storage Three Drawer Storage DESCRIPTION • Top not included • Top not included • Top not included
HEIGHT: INCHES 24 28 (Does not include work surface) 24 28 (Does not include work surface) 24 28 (Does not include work surface) HEIGHT: MM 610 711 610 711 610 711 DEPTH: INCHES 20 23 (Does not include work surface) 20 23 (Does not include work surface) 20 23 (Does not include work surface) DEPTH: MM 508 584 508 584 508 584 WIDTH: INCHES 21 21 21 30 36 WIDTH: MM 533 533 533 762 914
CAT. NO. U4050 U8060 U4590
Five Drawer Storage Six Drawer Storage Drawer Storage w/File Drawer DESCRIPTION • Top not included • Top not included • Top not included
HEIGHT: INCHES 24 28 (Does not include work surface) 24 28 (Does not include work surface) 24 28 (Does not include work surface) HEIGHT: MM 610 711 610 711 610 711 DEPTH: INCHES 20 23 (Does not include work surface) 20 23 (Does not include work surface) 20 23 (Does not include work surface) DEPTH: MM 508 584 508 584 508 584 WIDTH: INCHES 21 30 36 21 WIDTH: MM 533 762 914 533 * The mobile and suspended cabinets illustrated in this section are compatible with the table systems shown in the Flexible / Adaptable Table Systems section.. 7.02 2013 55 WOOD SUSPENDED AND MOBILE CABINETS
General Storage Mobile Cabinets
CAT. NO. U4540
File Drawer Storage DESCRIPTION • Top not included
HEIGHT: INCHES 28 (Does not include work surface) HEIGHT: MM 711 DEPTH: INCHES 20 23 (Does not include work surface) DEPTH: MM 508 584 WIDTH: INCHES 21 WIDTH: MM 533
* The mobile and suspended cabinets illustrated in this section are compatible with the table systems shown in the Flexible / Adaptable Table Systems section..
56 2013 7.03 WOOD SUSPENDED AND MOBILE CABINETS
General Storage Suspended Cabinets
CAT. NO. KA000 Open Cabinet DESCRIPTION • One adjustable shelf HEIGHT: INCHES 24 DEPTH: INCHES 24 WIDTH: INCHES 12 15 18 24 30 36
CAT. NO. KA305 KA315
Open/Drawer Cabinet Open/Drawer Cabinet DESCRIPTION • One adjustable shelf, one drawer • One adjustable shelf, two drawers
HEIGHT: INCHES 24 24 DEPTH: INCHES 24 24 WIDTH: INCHES 12 15 18 24 30 24 30
CAT. NO. KA011 (Hinged L) KA012 (Hinged R) KA010 KA051 (Hinged L) KA052 (Hinged R) Cupboard Cabinet Cupboard Cabinet Cupboard Cabinet DESCRIPTION • One adjustable shelf, one hinged door • One adjustable shelf, one hinged door • Two roll-out trays, one hinged door HEIGHT: INCHES 24 24 24 DEPTH: INCHES 24 24 24 WIDTH: INCHES 12 15 18 24 24 30 36 12 15 18 24
* The mobile and suspended cabinets illustrated in this section are compatible with the table systems shown in the Flexible Tables sections except the C-Frame table system. For mobile and suspended cabinets compatible with C-Frame, please refer to section 23.
7.04 2013 57 WOOD SUSPENDED AND MOBILE CABINETS
General Storage Suspended Cabinets
CAT. NO. KA050 KA310 KA300 Cupboard Cabinet Cupboard Cabinet Cupboard Cabinet DESCRIPTION • Two roll-out trays, two hinged door s • One adjustable shelf, two hinged doors, two • One adjustable shelf, two hinged doors, one drawers drawer HEIGHT: INCHES 24 24 24 DEPTH: INCHES 24 24 24 WIDTH: INCHES 24 30 36 24 30 24 30
CAT. NO. KA311 (Hinged L) KA312 (Hinged R) KA402 KA403 Cupboard Cabinet DESCRIPTION • One adjustable shelf, one hinged door, one Two Drawer Cabinet Three Drawer Cabinet drawer HEIGHT: INCHES 24 24 24 DEPTH: INCHES 24 24 24 WIDTH: INCHES 12 15 18 24 12 15 18 24 30 12 15 18 24 30
CAT. NO. KA404 KA405 KA406
DESCRIPTION Four Drawer Cabinet Five Drawer Cabinet Six Drawer Cabinet
HEIGHT: INCHES 24 24 24 DEPTH: INCHES 24 24 24 WIDTH: INCHES 12 15 18 24 30 12 15 18 24 30 12 15 18 24 30
* The mobile and suspended cabinets illustrated in this section are compatible with the table systems shown in the Flexible Tables sections except C-Frame.. For mobile and suspended cabinets compatible with C-Frame, please refer to section 23.
58 2013 7.05 WOOD SUSPENDED AND MOBILE CABINETS
General Storage Suspended Cabinets
CAT. NO. KA454 KA452 Drawer Cabinet Drawer Cabinet DESCRIPTION • Two drawers and one lateral file drawer • One drawer and one lateral file drawer HEIGHT: INCHES 24 24 DEPTH: INCHES 24 24 WIDTH: INCHES 18 24 18 24
CAT. NO. KAKA3 KAKB3 Knee Space Cabinet Knee Space Cabinet DESCRIPTION • One Drawer • Two drawers HEIGHT: INCHES 4 4 DEPTH: INCHES 24 24 WIDTH: INCHES 12 15 18 24 30 36 24 30 36
* The mobile and suspended cabinets illustrated in this section are compatible with the table systems shown in the Flexible Tables sec- tions except the C-Frame table system.. For mobile and suspended cabinets compatible with C-Frame, please refer to section 23.
7.06 2013 59