DOCSLIB.ORG

Product Information Canvaro Desk System Product Information Canvaro

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Product Information Canvaro Desk System Product Information Canvaro Canvaro Canvaro Compact PRODUCT INFORMATION CANVARO DESK SYSTEM PRODUCT INFORMATION CANVARO Canvaro ■ Desk system with slender C-foot frame ■ Optionally available with a rectangular or curved frame Tried and tested, high-performance and always at the right height. ■ Variants powered by electric motor or with manual adjustment, For quick and easy adjustment of the working position, from seated with or without gas spring cushioning to standing. Available with electric and manual height adjustment. ■ Versatile functions and planning options 2 3 CANVARO DESK SYSTEM PRODUCT INFORMATION CANVARO Sit / stand workplaces Sit / sit workplaces Manual height-adjustment In many cases, the performance and user orientation of a desk system does not become apparent until it needs to satisfy a wide variety of requirements. Up / down operation with 4 memory keys and LED display Electrically powered height adjustment Infinite electric height adjustment from 630 to 1280 mm that allows you to conveniently switch between sitting and standing. Equipped with large adjustment range, quiet motors, collision protection, low stand-by consumption, ease of use and highly functional accessories components. Height adjustment: Up / down operation Incremental adjustment Stylish levers* Allen key at the press of a button* The height of the desk can be adjusted The table height can be adjusted individually Height-adjustment crank without tools. The lever is in the same With the push-button adjustment, the Canvaro using an Allen key. colour as the frame, and there is also an Height-adjustment crank to set the preferred table height The Canvaro table is conveniently series desks with square cross-section can be option for gas spring adjustment. from 620 to 870 mm, or as a stand / sit model with an adjusted to a suitable height using adjusted in increments of 10 mm, entirely adjustment range between 680 and 1180 mm. the crank. The crank is pushed without tools. Practical push buttons located back beneath the table top once in the top section of the side frame parts are the preferred height has been used to adjust the table with gas spring reached. cushioning. * not available for the bench solution 4 5 CANVARO DESK SYSTEM PRODUCT INFORMATION CANVARO Accessories Power connections Of course, numerous add-ons such as PC and printer mounts, knee room panels and such like can be added to all table versions. E-box Turn E-box Line E-box Axial SD3, triple SDG2, double table top Schuko socket box ( individual ) Covers Printer mount PC mount for stand / sit table PC holder Knee room panel ( available in satinised safety glass, wood or perforated sheet metal design ) AFT, table top AAB / L, semicircular, AAB / L, rectangular, DFA19, for panel DFA25, for panel cut-out adapter*** for panel cut-out ** for panel cut-out ** cut-out ( AFT ), 19 mm *** ( AFT ), 25 mm *** Grommet Orga railing with organisational Table top wall Back table wall Standing add-on elements ( also available with Orga railing ) ( also available with Orga railing ) KDB / L cable outlet KDB / L cable outlet KSDP / LT cable outlet KDNC grommet, KDF / L grommet socket, round * socket, rectangular * socket with brush, Combi with holder for adapter rectangular ** cable routing ** Horizontal cable duct Levelling screw to compensate for Vertical cable duct Vertical cable routing for stand-sit SDP1, fitted box Point SDP2, fitted box Point floor unevenness up to 15 mm tables ( flexible cable spiral available ( only socket ) for standard tables ) ( Vkkm ) Available in: * Grey white, light grey, signal white, black, white aluminium, stainless steel look, chrome look SWN, swivel tray SWING Monitor mount Single Monitor mount Duo ** Black, white aluminium *** Grey white, signal white, white aluminium, anthracite grey, black 6 7 CANVARO DESK SYSTEM PRODUCT INFORMATION ZUBEHÖR + SYSTEM CANVARO Height adjustment System Standard Round Square Height adjustment range Frame type CR Frame type CQ Tables Folding tables Frame type CR / CQ: 620 – 860 mm Crank Height adjustment range ST STB STCP STDR12124 STDR12126 Frame type CR / CQ: 620 – 870 mm Fast crank STP STC STK STL Height adjustment range Frame type CQ: 680 – 1180 m m Electric Height adjustment range Conference add-ons Connecting elements Frame type CR: 630 – 1280 mm Frame type CQ: 630 – 1280 mm VE08EF VE45VT VE60VT VE90 KAB KAC KAL KAT Colours KA2T KAN KAP KAW VE12EF VE1210TR VE90RVT VE12EFRVT Decors KAZ KAD KADS VE60DR VE1208TR BASIC Device table Partition board Trapezoid elements Maple Beech Cherry malaga Ferrara oak Acacia Walnut Gravel ST06 Grey white Light grey Signal white Metallic silver Anthracite Slate Basalt ZP TT0808 TZ0808 Mist grey Black Sit / stand desks PREMIUM ST STB STCP STDR12124 STDR12126 STP STC STK STL Tobacco oak Oak natura Polar oak Light grey exposed Anthracite exposed concrete concrete Standalone work tables Width range: 800 mm, 1000 mm, 1200 mm, 1400 mm, 1600 mm, 1800 mm, 2000 mm | Depth range: 800 mm, 900 mm, 1000 mm Veneers* Bench desks Width range: 1200 mm, 1400 mm, 1600 mm, 1800 mm, 2000 mm | Depth range: 1700 mm, 1900 mm Natural birch Natural ash Natural oak Natural beech Pear tree Conference tables Cherry Walnut Grey ash Black ash Frame colours BT BTOV BTEP BTR BTRG BRR BR BG Signal white Grey white White aluminium Anthracite grey Black * Other veneers on request Refer to the electronic planning data and our programme manual for information about the variants and sizes. 8 9 CANVARO DESK SYSTEM PRODUCT INFORMATION CANVARO without legs” is selected. The L-shaped arrangement ■ Cover, rounded on one side, 88 × 71 mm, be easily adjusted later on. The railing can accommo- Technical description, Canvaro article then completes your order. plastic, 3-part date a variety of accessories, such as storage trays, ■ Rectangular cover, 88 ×71 mm, plastic, 3-part pen holders, CD carriers etc. A selection of screen Power connections supports ( flat screens ) can also be mounted on the Horizontal cable routing Knee room panels rails. The railing system is supplied in an anodised The horizontal cable duct made of powder-coated Knee room panels are fitted as privacy screens and aluminium version with a similar surface and design to steel is attached to the upper frame using sturdy plas- attached to the frame using special adapters or the adapters for the other accessories. tic brackets and can be folded down on the user or directly to the table top with screw-on brackets. The The Canvaro desk programme includes height-adjust- placed underneath, even when the table is adjusted ■ Adjustment scale visitor side as required. Strain relief fittings are used to knee room panels have a height of 545 mm, and they Table-top sockets able desks in various versions. All variants are option- to its lowest setting. ■ Screwed cantilever legs in secure the cables. A locking mechanism prevents the are mounted at a distance of approx. 30 mm from the Anodised aluminium socket box for direct access ally available with 70 mm round tube or 70 / 70 mm different lengths cable duct from being folded down unintentionally. underside of the table top. to power and communication connections. The box square tube side panels. Height-adjustable base ta- CV desks ( basic tables ) ■ The cantilever legs are also available in chrome The following materials are available for Canvaro: is connected to Flexter on a 60 mm adapter made bles as well as height-adjustable crank and motorised ■ C-leg look, subject to a surcharge Vertical cable routing ■ Wood ( melamine or real wood ), 8 mm panel thick- of anodised aluminium, and a cable clip guides the desks have the same leg and runner design. ■ Tube-in-tube guide for infinite height adjustment Vertical routing of the cables takes place via a plug- ness, with circumferential edging permanently installed in-feed cables directly along from 620 – 860 mm CV desks ( stand / sit tables ) gable cable routing that can be attached to the frame ■ Metal, 2 mm material thickness, powder-coated – the adapter under the table top. Connections such Materials ■ Height-adjustable using an Allen key ■ C-leg leg or via a cable chain that is attached to the table square or round holes as power, USB charging and HDMI are individually Canvaro components are made of high-quality materi- ■ Base adjustment screws for compensation of ■ Infinite electric height adjustment from 630 to top. An optional cable chain is available for sit / stand ■ Glass, 6 mm single-pane safety glass ( ESG ), selectable and always meet the latest standards. als that meet all current standards and guidelines. floor unevenness (+15 mm ). 1280 mm with a round tube ( double telescope tables, which ensures cable routing from the under- with satin finish, with bevelled edges ■ Middle column ( external ) 70 mm round tube, stroke ) side of the table top to the floor. Privacy elements Panel material 70 / 70 mm square tube, inner tube with head plate ■ Infinite electric height adjustment from 630 to System add-ons Partitioning screen system without visible frame, in The table elements are made of high-quality, to screw onto the upper frame 1280 mm with a square tube ( double telescope Sliding panel function CPU mount ( CPA ) fabric look and suitable for simple zoning and demar- three-layer chipboard with direct melamine resin ■ Series-fitted adjustment scale stroke ) A sliding panel function is optionally available for se- The CPU mount is offered in three variants: cation of workspaces. They are attached to a 60 mm adapter made of anodised aluminium. coating according to DIN EN 14322 in plain surfaces ■ Screwed cantilever legs in different lengths ■ One motor element per frame side part; up to three lected panel shapes. The set price includes additional ■ CPAP: For installation below the table top, with or with various wood décors, sealed on all sides with ■ The cantilever legs are also available in chrome motor elements for large panel geometries milling in the table top, a horizontal cable duct with safety strap to secure the computer.
Load more

Recommended publications
  • How to Install Wall Panelling
    Precision + Style Collection STRIPWOOD PROJECT 4 HOW TO INSTALL WALL PANELLING A step-by-step guide to creating a feature wall within your home, using Richard Burbidge mouldings and basic woodworking tools and techniques. PROJECT 4 HOW TO INSTALL WALL PANELLING There are hundreds of different designs you can create with wall panelling, in this guide we take you through the steps of installing the classic but TIME REQUIRED contemporary square panel design to create a feature wall. Planning: 2 hours Sawing & fitting: 1 hour STEP 1. Planning and measuring Firstly, you will need to measure the walls every length and width, making a note of any fittings you will need to avoid. Draw your design with the measurements on some paper, making sure to plan an equal gap horizontally and vertically. The next step is to transfer your measurements and TOOLS REQUIRED plan to the wall, using a pencil, tape gap < > vertical measure and laser level mark where each < > horizontal gap · 12 x 96 x 2400mm Pine Stripwood panel piece will be, while bearing in mind · Tape Measure the width of the panel. We also recommend · Pencil removing skirting and architrave on the feature · Paper wall to achieve a professional finish. · Laser Level · Ladder · Saw STEP 2. Choose your Richard Burbidge moulding · Mitre Box · Sandpaper Richard Burbidge mouldings are of the highest quality · Grab Adhesive* and can totally transform the look and character of a · Nail Gun whole room. Our stripwood range has a vast selection of · Nails panel sizes to choose from. For this project we are using · Decorators Caulk a 12 x 96 x 2400mm pine panel that creates the classic · Paint square feature wall you will have seen everywhere on Pine STW6027 · Primer** Pinterest and Instagram! 12 x 96 x 2400mm · Paint Brush · Paint Roller STEP 3.
    [Show full text]
  • ADHESIVES AWARENESS Guide
    ADHESIVES AWARENESS GUIDE Flange Web Flange American Wood Council American Wood American Wood Council ADHESIVES AWARENESS GUIDE The American Wood Council (AWC) is the voice of North American traditional and engineered wood products, representing over 75% of the industry. From a renewable resource that absorbs and sequesters carbon, the wood products industry makes products that are essential to everyday life and employs over one-third of a million men and women in well-paying jobs. AWC's engineers, technologists, scientists, and building code experts develop state-of-the- art engineering data, technology, and standards on structural wood products for use by design professionals, building officials, and wood products manufacturers to assure the safe and efficient design and use of wood structural components. For more wood awareness information, see www.woodaware.info. While every effort has been made to insure the accuracy of the infor- mation presented, and special effort has been made to assure that the information reflects the state-of-the-art, neither the American Wood Council nor its members assume any responsibility for any particular design prepared from this publication. Those using this document assume all liability from its use. Copyright © American Wood Council 222 Catoctin Circle SE, Suite 201 Leesburg, VA 20175 202-463-2766 [email protected] www.woodaware.info AMERICAN WOOD COUNCIL FIREFIGHTER AWARENESS GUIDES 1 The purpose of this informational guide is to provide awareness to the fire service on the types of adhesives used in modern wood products in the construction of residential buildings. This publication is one in a series of eight Awareness Guides developed under a cooperative agreement between the Department of Homeland Security’s United States Fire Administration and the American Wood Council.
    [Show full text]
  • Avined Technical Furnishings
    Instructor Podium Desk AvinED® Model # IPD70 Technical Furnishings, Inc. This podium desk is designed for the instructor or presenter that needs the height of a podium and the versatility of a desk. Note: All electronic / AV equipment is shown for demonstration purposes only & is not included. PRODUCT SIZE 70 1/4” wide | 31” deep | 46 1/2” overall podium hieght (40 3/8” high at work surface ON PODIUM) | 33” high at desk top AVAILABLE EXTERIOR FINISHES MEL = Thermally Fused Melamine Laminate LAM = Plastic Laminate WV = Clear Finish Wood Veneer WVS = Standard Color Stained Wood Veneer WVCS = Custom Color Stained Wood Veneer STANDARD FEATURES CPU tower space with storage drawer above under desk (WV) Models = Standard wood veneers on veneer or MDF core Keyboard pullouts at knee space and lectern plywood. Include solid and wood veneer edges. Wire chase between lectern and CPU cabinet in the rear of the knee space (LAM) Models = Plastic laminate exteriors on black particle board Single locking 270 degree full wrap around doors on lectern and CPU cabinet core melamine with PVC edges Locking removable rear access panels (MEL) Models = Particle board core melamine laminate with Base Levelers (or) Heavy Duty Locking Casters PVC edges 3 ½” Fan cut out with cover grommet in lectern side (fan not included) Desk Top – Flat – equipment cut outs - upon request upon request ADA Compliant Desk Knee Space Top 2” wire grommets in both podium and desk tops Side 3” wire grommets Front mounted 16RU rack rail (or) three adjustable shelves in lectern Lectern can be ordered on Presenters Right (or) Left side OPTIONS Flip up side shelved Doc.
    [Show full text]
  • Performance of Nailed Gusset Joints in Ridged Timber Portals
    Journal of Forest Engineering »13 Performance of Nailed Gusset Joints have generally been the weakest link in timber structures which has necessitated research Joints in Ridged Timber Portals into the various types of mechanical connectors. The performance of the joints, in general, is determined A. Kermani1 by the material properties of the timber and connec­ Napier Polytechnic of Edinburgh, UK tor, the joint configuration and the loading condi­ tions. and General research studies by Bryant et al [5], B. S. Lee Mack [8,9], Morris [10,11,12], Moss and Walford B. S. Lee and Associates, [13], and Smith et al [15,16] on nailed timber joints Osmotherley, UK have developed theoretical and experimental un­ derstanding of the strength and stiffness of simple nailed joints subjected to short term loading. The effect of loading condition, moisture content, nail ABSTRACT diameter and length, and timber species on simple nailed joints have been examined. Emphasis so far, The structural behaviour and performance of by most investigators, has been placed on the more nailed plywood gusset knee joints of timber portal general aspects of the nailed joint behaviour rather frames are investigated. An analytical study has than on the applied research studies, which for the shown, and experimental study has confirmed, that purpose of the present investigation refers to the the behaviour of the joints in terms of strength and moment carrying haunched knee joints in timber stiffness, distribution of stresses, and rotation of nail frames. groups within the gusset haunches, is directly related to the joint's component arrangements, plywood Limited studies carried out so far, have mainly grain orientation and the dowel action of the nails.
    [Show full text]
  • Clausing Kalamazoo Vertical Band Saw
    Clausing Kalamazoo Vertical Band Saw Wolfy overraking scot-free as licensed Abdul cheapen her rounding demobilised quixotically. Is Waylen always shamanic and globate when carrying some indestructibility very boyishly and bashfully? Dyslectic and aforesaid Teddie overbought while spired Eliot redescribed her Waco helpfully and promulgates hurriedly. Independent operation of clausing kalamazoo saws. Wheels on our clausing kalamazoo band saw enables you hate the clausing kalamazoo vertical band saw? Our extensive inventory is yet another way to keep you satisfied. This saw was engineered for portability for cutting ferrous and nonferrous metals with speed, efficiency and durability. There are unable to receive a whole new search to view clausing kalamazoo vertical band saw? Maximum height under the blade slip, band saw was found. Log in to your customer account to request a product quote. Millions of items in stock! You are not! Cutting Fluid Tank Cap. If you are currently no reviews yet another way to your metal saw customers around the clausing kalamazoo vertical band saw? Sfpm is taller, machined to produce uniform cutting saws any reason our clausing kalamazoo vertical band saw, especially after the clausing provides for. To browse and purchase used machinery click the Browse Used button below. Complete customer service representatives are you know about how dna might also be sure you have experienced machinery dealers, to replace its voltage peak. This saw delivers a drop to view clausing kalamazoo customer care team. These are only available until the stock is depleted. Even when the clausing installed welder, vertical tilt frame without having more ideas about this band wheels.
    [Show full text]
  • BDFA Newsletter
    Batten Disease Newsletter ISSUE 31 AUTUMN/WINTER 2015 from the only dedicated UK charity raising awareness, providing support and funding research into Batten disease Batten Disease Family Association Registered Charity No. 1084908 01252 416323 [email protected] www.bdfa-uk.org.uk The Old Library, 4 Boundary Road, Farnborough, Hants. GU14 6SF 2 Dear Member From our Chief Executive From our Chair Dear BDFA members, friends and Dear all, colleagues, In our Spring newsletter, Andrea and I wrote When I sit down to write my piece for the about the new members of our staff team. I BDFA newsletter it always gives me the am very pleased to report that the staff have opportunity to take some time and look settled in well and are greatly enhancing our at what has been achieved over the past work. As a Board we consistently challenge few months. A wise friend always says that ourselves on every penny spent by the BDFA Andrea sometimes we are so focussed on getting so it has been very pleasing to see the benefits to where we want to be that we forget how that investment in our infrastructure and staff far we have come. The end of our journey is a much longed-for world Mike team has made. without Batten disease but we sometimes forget that we get there by all the single steps taken by our fundraisers, members, supporters As I write this report it is sad to see a major UK charity, Kids and families who live with this disease and its legacy every day.
    [Show full text]
  • Saint Patrick Church by Kevin H
    SPOTLIGHT award winners and outstanding projects Saint Patrick Church By Kevin H. Chamberlain, P.E. ® aint Patrick Church in Redding this classical structural form be Connecticut faced a challenge. With engineered for modern building more families moving into town, codes with commercially-available their cozy 1880 mission church was timbers, and be within budget? burstingS at the seams. The time had come The design began with a 3D for a new church to serve the growing parish. finite elements model of the The challenge was to achieve an inspirational trusses and other frame members. design that complemented the vernacular of Several configurations of truss the old church, all on a modest budget. geometry were attempted, refined, The design was a collaboration of Daniel and re-analyzed.Copyright The tricky thing Conlon Architects and DeStefano & about any timber frame structure, Chamberlain, Structural Engineers. After particularly a hammerbeam truss, the program and building size were defined, is to configure members to trans- Church interior with exposed timber frame. Courtesy of options for structural systems were discussed. fer forces in bearing and to avoid, Olson Photographic, LLC. A long steep gable roof over the main sanctuary or at least minimize, tension joints. Unbal- is knee bracing on the timber frame, in con- space could create either an exciting space or anced snow loading and lateral forces on the junction with plywood sheathing panels on a bland one. An architecturally exposed struc- trusses caused stress reversals that had to be the stud walls. tural system would shape the interior of the considered. Unlike the old cathedrals, the The 3D model was not retired after the massive roof surface.
    [Show full text]
  • Design and Validation of a Workbench for Knee Joint Biomechanical Analysis
    POLITECNICO DI TORINO Corso di Laurea Magistrale in Ingegneria Biomedica Master Thesis Design and validation of a workbench for knee joint biomechanical analysis Relator Prof.ssa Cristina Bignardi Supervisor Prof. Bernardo Innocenti Student Nicola Armillotta March 2020 alla mia famiglia che mi ha permesso di seguire i miei sogni Abstract The knee joint is one of the most complex articulations in human body. Its structure has been investigated for decades with several techniques such as clinic imaging, finite element analysis and robot simulations. The huge quantity of soft tissues of this joint provide stability during everyday tasks. However, the knee is constantly subjected to forces so high that can easily reach up to four times the total weight of our body. For this reason, knee joint is the one that gets damaged the most in human being. Kinematic and kinetic strongly depend on boundary condition such as load history, soft tissue properties and anatomy of the subject. All these elements can be very different for each person and make difficult to generalize results achieved in studies. TC and MR images provide anatomical information without describing any kinetic and kinematic behaviour of the joint and because of the difficulties of acquiring in-vivo data, new methods of investigation are developing thanks to new technologies. Motion parameters like speed, forces and position can be easily recorded with non-invasive techniques and they can be evaluated by a proper model that enable to investigate internal forces and reactions. In order build reliable models to be referred, it is necessary to own specific instrumentation to emulate different daily tasks while acquiring and elaborating motion parameters.
    [Show full text]
  • Architectural Woodwork Standards, 2Nd Edition
    Architectural Woodwork Standards CASEWORK 10S E C T I O N SECTION 10 Casework table of contents INTRODUCTORY INFORMATION Cabinet and Door Interface Style Terminology ...................................288 Guide Specifications ...........................................................................284 Flush Overlay ...............................................................................288 Introduction .........................................................................................285 Overlay .........................................................................................288 Casework Categories ..........................................................................285 Face Frame Construction .............................................................288 Wood Casework ...........................................................................285 Flush Inset ....................................................................................288 Decorative Laminate Casework ...................................................285 Layout Requirements of Grained or Patterned Faces by Grade .........289 Solid Phenolic Casework ..............................................................285 Stile and Rail ................................................................................289 Contract Documents ...........................................................................285 Flush Panel ..................................................................................289 Design Professional’s Responsibility
    [Show full text]
  • Kalamazoo Horizontal Bandsaws
    www.clausing-industrial.com A Complete Line of Precision General Purpose Horizontal Bandsaws Precision Manual Bandsaws Precision Semi-Automatic Bandsaws Precision Fully-Automatic Bandsaws Clausing/Kalamazoo 8" (200mm) Wet Cutting Bandsaw Features: • 1 Hp (.75kw) drive motor with magnetic starter and overload protection • 4 speed step pulley with worm gear speed reducer, worm shaft is hardened and ground • Totally enclosed transmission • Heavy-duty hydraulic cylinder with precision ground hinge support • Pan shaped base with built-in coolant & hydraulic system • Cast iron bed • Carbide blade guides with roller bearings • Two additional bearings to support blade from the top • Integral coolant system • Blade brush Specifications • Valve controlled hydraulic cylinder control feed can be adjusted for different types Model KC812W and sizes of material Type Horizontal wet cut • Adjustable stock stop Drive Motor 1 Hp (.75kw) 110v or 220v 1 Ph • Simplified control switches mounted on Band Wheel Diameter 11.5" (292mm) Flanged, Cast Iron saw head Blade Size 1" x .035" x 8'-11" • Cast iron 0°- 45° vise with manual (27 x .9 x 2720mm) leadscrew clamping system Bed Height 24.8" (639mm) • Anti-slip hand wheel Blade Speeds (4) 59, 96, 155, 260 fpm • Easy blade change with front access at (18, 29, 47, 79 m/min) waist level 90° Cutting Capacity • 1" wide bi-metal saw blade Round 8" (190mm) • Operation & parts manual Square 7" (180mm) • Two (2) year limited warranty Rectangular (H x W) 7" x 14" (180 x 355mm) 45° Cutting Capacity Accessories Round 7.5" (200mm) • BT01 Bandsaw Blade Tension Gauge Square 6" (152mm) • P10 Stock Stand Assembly 21" - 30" Rectangular (H x W) 6" x 9" (152 x 228mm) • SA8 Roller Table Assembly 10' x 15" Width 59" (1500mm) • SA9 Roller Table Assembly 5' x 15" Depth 24.6" (625mm) • BT01 Bandsaw Blade Tension Gauge Height (head-up) 63" (1600mm) • CSR1 SAWZIT 1 Gallon Height (head-down) 45" (1150mm) • CSR5 SAWZIT 5 Gallon Net Weight 484 lbs.
    [Show full text]
  • Softwoods of North America. Gen
    United States Department of Agriculture Softwoods of Forest Service Forest North America Products Laboratory General Technical Report FPL–GTR–102 Harry A. Alden Abstract This report describes 52 taxa of North American softwoods, which are organized alphabeti- cally by genus. Descriptions include scientific name, trade name, distribution, tree character- istics, wood characteristics (e.g., general, weight, mechanical properties, drying, shrinkage, working properties, durability, preservation, uses, and toxicity), and additional sources of information. Data were compiled from existing literature, mostly from research done at the U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, Wis- consin. Keywords: softwoods, properties, North America, wood Acknowledgments Sincere thanks to the staff of the USDA Forest Service, Forest Products Laboratory, for their aid in the preparation of this work. Special thanks to David Green, David Kretschmann, and Kent McDonald of the Engineering Properties of Wood Group; John “Rusty” Dramm of State and Private Forestry; Scott Leavengood and James Reeb of Oregon State University; and Lisa Johnson of the Southern Pine Inspection Bureau who reviewed this manuscript. Also thanks to Susan LeVan, Assistant Director, Forest Products Laboratory, for her support and the Information Services team, Forest Products Laboratory, for final editing and produc- tion of this report. This book is dedicated to Elbert Luther Little, Jr. (1907–present) for his significant and vo- luminous contributions to the nomenclature and geographic distributions of both softwood and hardwood trees of North America (45, 76, 100–139, 197, 198). September 1997 Alden, Harry A. 1997. Softwoods of North America. Gen. Tech. Rep. FPL–GTR–102. Madison, WI: U.S.
    [Show full text]
  • A Modeling Method of Human Knee Joint Based on Biomechanics
    E3S Web of Conferences 179, 02096 (2020) https://doi.org/10.1051/e3sconf/202017902096 EWRE 2020 A Modeling Method of Human Knee Joint Based on Biomechanics Jin Gao1, Yajing Wang1, Yahui Cui, Xiaomin Ji1, Xupeng Wang1 1Department of Industrial Design, Xi’an University of Technology, Xi’an Shaanxi, 710048, China Abstract. In order to establish an accurate model of human knee joint, which lays a foundation for the follow- up finite element analysis of knee joint and biomechanics analysis, the paper based on the theory of biomechanics and MRI, with the help of professional modeling software, provides a 3D geometric model modeling and materialization processing method of knee joint, and established a total knee joint model including femur, tibia, fibular, meniscus, cartilage, ligament and other related structures. meniscus appeared in the middle and posterior part, about 3.34Mpa. However, this load value has not been verified. 1 Introduction In summary, biomechanics such as the internal motion Exercise is an important part of the daily activities of the and stress law of the knee joint can be studied by finite human body, and the knee joint plays an important role in element analysis, which can simulate the mechanical the movement of the human body. Due to the intensity of changes of the knee joint under the condition of difficult the movement, this area is often due to industrial samples. In this paper, it is proposed to conduct MRI scan production, accidents and sports injuries caused by of the knee joint of human body, and then reconstruct the injuries. According to the analysis of 2725 trauma cases knee joint model with the real two-dimensional in Beijing sports medicine research, 25.82% of them were tomography image, so as to provide a certain reference for knee joint injuries [1].
    [Show full text]