DOCSLIB.ORG

Computerization of Operation and Maintenance for Nuclear Power Plants

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Computerization of Operation and Maintenance for Nuclear Power Plants IAEA-TECDOC-808 Computerizationof operation and maintenance for nuclear power plants Report prepared within the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation INTERNATIONAL ATOMIC ENERGY AGENCY The originating Section of this publication in the IAEA was: Nuclear Power Engineering Section International Atomic Energy Agency Wagramerstrasse 5 0 10 x Bo P.O. A-1400 Vienna, Austria COMPUTERIZATIO OPERATIOF NO MAINTENANCD NAN R EFO NUCLEAR POWER PLANTS IAEA, VIENNA, 1995 IAEA-TECDOC-808 ISSN 1011-4289 © IAEA, 1995 Printed by the IAEA in Austria July 1995 PLEASE BE AWARE THAT MISSINE TH AL F LO G PAGE THIN SI S DOCUMENT WERE ORIGINALLY BLANK FOREWORD The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as wel s economia l c competition have become stronger a result s A ,. IAEA Member States have requested assistance and advice to guide their use of computers in nuclear power plants. rapie Th d advanc computef eo r hardwar softward ean e technolog decadelase o th tw t n ys i sha greatly enlarge potentiale dth f computeso r application l aspectal n si f desig so engineerind nan f go future plants as well as operation and maintenance of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to enhance human performanc corporatd an e e busines informatioy sb n processin knowledge-based gan d systems. This report provide a resourcs r computerizatiofo e f activitieo n plann i s t operatiod an n maintenance. Experience gained from design and implementation of various computer systems around the world is described. The material may be useful as a guide to modification and upgrading of existing plant wels sa desigs a l engineerind nan plantsw ne t shoulf I g.o particularle db interesf yo t to managers and engineers who are engaged in planning, bidding, specifying or designing computer systems for operation and maintenance applications. The technical document is the result of a series of advisory and consultant meetings held by the IAE Viennn Ai n 1991-1994i a s preparewa t I .d wit participatioe hth f expertno s from Canada, France, Germany, Hungary, Japan, Russian Federation, Sweden, the United Kingdom and the USA. Recognition is given to other contributors in "Contributors to Drafting and Review" in this report. Special thanks are due to B. Sun of the Electric Power Research Institute, USA, who compiled and edited the document from contributions provided by the working group members, particularly, A. Cook of Canada, D. Spohn of France, W. Bastl of Germany and D. Welbourne of the United Kingdom. The IAEA officer responsible for preparing this document is A. Kossilov of the Nuclear Power Engineering Section. EDITORIAL NOTE In preparing this document for press, staff of the IAEA have made up the pages from the original manuscripts submittedas authors.the viewsby The expressed necessarilynot do reflect those governmentsofthe nominatingthe of Member nominating the States of or organizations. Throughout the text names of Member States are retained as they were when the text was compiled. Theof use particular designations countriesof territoriesor does imply judgementnot any by publisher,the legalthe IAEA, to statusthe as of such countries territories,or of their authoritiesand institutions delimitationthe of or of their boundaries. The mention of names of specific companies or products (whether or not indicated as registered) does not imply any intention to infringe proprietary rights, nor should it be construed as an endorsement or recommendation on the part of the IAEA. The authors responsibleare havingfor obtained necessarythe permission IAEAthe to for reproduce, translate materialuse or from sources already protected copyrights.by CONTENTS 1. OBJECTIVE ...............................................9 . 1.1. Operation and maintenance of nuclear power plants ..................... 9 1.2. Scope of the report ......................................... 9 1.3. Purpos repore th f eo t .......................................0 1 . OVERVIE2 COMPUTERIZATIOF WO NUCLEAN NO R POWER PLANTS .......0 1 . computerf o e 2.1Us . nuclean i s r power plants ..........................0 1 . 2.1.1. Historical evolution ...................................0 1 . 2.1.2. Reason applyinr sfo g computers ............................0 1 . 2.2. Overview of application areas .................................. 12 2.2.1. Computer applications to operations .......................... 12 2.2.1.1. Data logging ................................... 12 2.2.1.2. Information systems .............................2 1 . 2.2.1.3. Monitorin diagnostid gan c systems ....................3 1 . 2.2.1.4. Digital contro automatiod an l n .......................3 1 . 2.2.1.5. Protection ..................................... 13 2.2.2. Computer applications to maintenance ........................ 14 2.2.2.1. Predictive maintenance and inspection ................... 14 2.2.2.2. Maintenance management ..........................4 1 . 2.2.3. Engineering and administrative functions ....................... 15 2.3. Human-machine partnership ..................................5 1 . 2.3.1. Functions which must be automated by computers ................. 16 2.3.2. Functions which are better automated by computers ................ 16 2.3.3. Functions which shoul allocatee db humano dt s ..................7 1 . 2.3.4. Balancing factors ...................................... 17 2.4. Relationship to safety and availability ............................. 18 2.4.1. System considerations .................................. 18 2.4.2. Regulatory and licensing requirements ........................ 18 2.4.3. Computer safetr sfo y applications ..........................8 1 . 2.4.3.1. Advantages .................................... 18 2.4.3.2. Challenges ...................................9 1 . 3. COMPUTER APPLICATIONS TO OPERATION OF NUCLEAR POWER PLANTS . 21 3.1. Introduction ............................................. 21 3.2. Monitoring, control and protection architecture ....................... 24 3.2.1. Monitoring systems .................................... 24 3.2.1.1. Operator information systems for plant monitoring ........... 24 3.2.1.2. Specialized reactor monitoring ........................ 24 3.2.2. Fault-tolerant control systems .............................4 2 . 3.2.3. Integrated contro monitorind an l g ..........................6 2 . 3.2.3.1. Objectives ..................................... 26 3.2.3.2. Safety and availability ............................. 28 3.2.3.3. CONTROBLO nucleaW M 0 r Cpowe30 layou1 a r n plani t t ....8 2 . 3.2.4. Protection systems ....................................0 3 . 3.3. Information system operatod an s r aids ............................0 3 . 3.3.1. Information system controe th n i s l room ......................0 3 . 3.3.1.1. Information presentation methodology ................... 32 3.3.1.2. Experience with VDU systems in control rooms ............. 32 3.3.2. Operator aids ........................................ 35 3.3.2.1. Diagnosi prognosid san s ...........................5 3 . 3.3.2.2. Experience .................................... 37 3.4. Control and automation ...................................... 38 3.4.1. Automatic control functions ..............................8 3 . 3.4.2. Sequenc interlocd ean k control ............................8 3 . 3.4.3. Integrated control and multiplexing .......................... 39 3.5. Protection systems ......................................... 40 3.5.1. Introduction ......................................... 40 3.5.2. Representative systems .................................. 41 3.5.2.1. Integrated digital protection system ..................... 41 3.5.2.2. Integrated protection system ......................... 44 3.5.2.3 inherentln A . y safe automation trip system ................4 4 . 3.5.3. Experience ......................................... 45 . COMPUTE4 R APPLICATIO MAINTENANCO NT NUCLEAF EO R POWER PLANTS ............................................ 46 4.1. Introduction ............................................. 46 4.2. Maintenance management .................................... 47 4.2.1. Basic maintenance files .................................. 47 4.2.2. Maintenance administration/routines .........................7 4 . 4.2.3. Outage planning ...................................... 48 4.2.4. Materials management .................................. 50 4.2.5. Maintenance support functions ............................0 5 . 4.2.6. Other administrative functions ............................1 5 . 4.3. Equipment performance applications .............................1 5 . 4.4. Advantages and benefits ..................................... 52 4.4.1. Quality ...........................................2 5 . 4.4.2. Production .......................................... 53 4.4.3. Cost .............................................3 5 . 5. MANAGEMENT OF COMPUTERIZED INFORMATION SYSTEM ............ 53 5.1. Management of hardware, software and data ......................... 53 5.2. Change control ........................................... 54 5.3. Quality assuranc computer efo r systems ...........................4 5 . 5.3.1. Quality assurance requirements ............................. 54 5.3.2.
Load more

Recommended publications
  • Neural Network Based Microgrid Voltage Control Chun-Ju Huang University of Wisconsin-Milwaukee
    University of Wisconsin Milwaukee UWM Digital Commons Theses and Dissertations May 2013 Neural Network Based Microgrid Voltage Control Chun-Ju Huang University of Wisconsin-Milwaukee Follow this and additional works at: https://dc.uwm.edu/etd Part of the Electrical and Electronics Commons Recommended Citation Huang, Chun-Ju, "Neural Network Based Microgrid Voltage Control" (2013). Theses and Dissertations. 118. https://dc.uwm.edu/etd/118 This Thesis is brought to you for free and open access by UWM Digital Commons. It has been accepted for inclusion in Theses and Dissertations by an authorized administrator of UWM Digital Commons. For more information, please contact [email protected]. NEURAL NETWORK BASED MICROGRID VOLTAGE CONTROL by Chun-Ju Huang A Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Master of Science in Engineering at The University of Wisconsin-Milwaukee May 2013 ABSTRACT NEURAL NETWORK BASED MICROGRID VOLTAGE CONTROL by Chun-Ju Huang The University of Wisconsin-Milwaukee, 2013 Under the Supervision of Professor David Yu The primary purpose of this study is to improve the voltage profile of Microgrid using the neural network algorithm. Neural networks have been successfully used for character recognition, image compression, and stock market prediction, but there is no directly application related to controlling distributed generations of Microgrid. For this reason the author decided to investigate further applications, with the aim of controlling diesel generator outputs. Firstly, this thesis examines the neural network algorithm that can be utilized for alleviating voltage issues of Microgrid and presents the results. MATLAT and PSCAD are used for training neural network and simulating the Microgrid model respectively.
    [Show full text]
  • Monitoring and Diagnosis Systems to Improve Nuclear Power Plant Reliability and Safety. Proceedings of the Specialists` Meeting
    J — v ft INIS-mf—15B1 7 INTERNATIONAL ATOMIC ENERGY AGENCY NUCLEAR ELECTRIC Ltd. Monitoring and Diagnosis Systems to Improve Nuclear Power Plant Reliability and Safety PROCEEDINGS OF THE SPECIALISTS’ MEETING JOINTLY ORGANISED BY THE IAEA AND NUCLEAR ELECTRIC Ltd. AND HELD IN GLOUCESTER, UK 14-17 MAY 1996 NUCLEAR ELECTRIC Ltd. 1996 VOL INTRODUCTION The Specialists ’ Meeting on Monitoring and Diagnosis Systems to Improve Nuclear Power Plant Reliability and Safety, held in Gloucester, UK, 14 - 17 May 1996, was organised by the International Atomic Energy Agency in the framework of the International Working Group on Nuclear Power Plant Control and Instrumentation (IWG-NPPCI) and the International Task Force on NPP Diagnostics in co-operation with Nuclear Electric Ltd. The 50 participants, representing 21 Member States (Argentina, Austria, Belgium, Canada, Czech Republic, France, Germany, Hungary, Japan, Netherlands, Norway, Russian Federation, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, UK and USA), reviewed the current approaches in Member States in the area of monitoring and diagnosis systems. The Meeting attempted to identify advanced techniques in the field of diagnostics of electrical and mechanical components for safety and operation improvements, reviewed actual practices and experiences related to the application of those systems with special emphasis on real occurrences, exchanged current experiences with diagnostics as a means for predictive maintenance. Monitoring of the electrical and mechanical components of systems is directly associated with the performance and safety of nuclear power plants. On-line monitoring and diagnostic systems have been applied to reactor vessel internals, pumps, safety and relief valves and turbine generators. The monitoring techniques include nose analysis, vibration analysis, and loose parts detection.
    [Show full text]
  • Community Energy White Paper April 2014 Contents
    Community Energy White Paper April 2014 Contents Letter from the CEO .............................................................................. 3 Executive Summary ............................................................................. 4 Redefining energy ............................................................................... 5 Today’s challenges .............................................................................. 8 The future of energy .......................................................................... 11 A solution: Decentralisation ............................................................... 14 Why focus on communities? .............................................................. 15 What can we learn from other countries? ........................................ 20 A platform for success ...................................................................... 24 How will it work? ............................................................................... 25 Government support ......................................................................... 26 Appendix: The UK Government’s community energy strategy ....... 27 Bibliography ....................................................................................... 29 2 Letter from the CEO All industries evolve. If they don’t, they die out or are supplanted by something different. Evolution can take many forms - value for money, customer service, product innovation, operational efficiency. But one way or another, change means survival and growth.
    [Show full text]
  • Magnox Electric Plc's Strategy for Decommissioning Its Nuclear
    A review by HM Nuclear Installations Inspectorate Magnox Electric plc’s strategy for decommissioning its nuclear licensed sites A review by HM Nuclear Installations Inspectorate Magnox Electric plc’s strategy for decommissioning its nuclear licensed sites Published by the Health and Safety Executive February 2002 Further copies are available from: Health and Safety Executive Nuclear Safety Directorate Information Centre Room 004 St Peter’s House Balliol Road, Bootle Merseyside L20 3LZ Tel: 0151 951 4103 Fax: 0151 951 4004 E-mail: [email protected] Available on the Internet from: http://www.open.gov.uk/hse/nsd ii FOREWORD This report sets out the findings of a review by the Health and Safety Executive’s Nuclear Installation Inspectorate, in consultation with the environment agencies, of the Magnox Electric plc (Magnox Electric) decommissioning and waste management strategies for its nuclear licensed sites. The review was undertaken in accordance with the 1995 White Paper “Review of Radioactive Waste Management Policy: Final Conclusions”, Cm 2919, which stated that the Government would ask all nuclear operators to draw up strategies for the decommissioning of their redundant plant and that the Health and Safety Executive (HSE) would review these strategies on a quinquennial basis in consultation with the environment agencies. The Magnox Electric strategy upon which this review is based was prepared subsequent to the merger of Magnox Electric with British Nuclear Fuels plc (BNFL) but whilst it still remained a separate nuclear site licensee under the Nuclear Installations Act 1965 (as amended). This report therefore considers Magnox Electric’s decommissioning and waste management strategies as of April 2000 for its nuclear licensed sites at: Berkeley, Bradwell, Dungeness A, Hinkley Point A, Hunterston A, Oldbury, Sizewell A, Trawsfynydd and Wylfa; and at the Berkeley Centre; and for the financial liabilities for waste and decommissioning on other nuclear licensed sites (e.g.
    [Show full text]
  • Endless Trouble: Britain's Thermal Oxide Reprocessing Plant
    Endless Trouble Britain’s Thermal Oxide Reprocessing Plant (THORP) Martin Forwood, Gordon MacKerron and William Walker Research Report No. 19 International Panel on Fissile Materials Endless Trouble: Britain’s Thermal Oxide Reprocessing Plant (THORP) © 2019 International Panel on Fissile Materials This work is licensed under the Creative Commons Attribution-Noncommercial License To view a copy of this license, visit ww.creativecommons.org/licenses/by-nc/3.0 On the cover: the world map shows in highlight the United Kingdom, site of THORP Dedication For Martin Forwood (1940–2019) Distinguished colleague and dear friend Table of Contents About the IPFM 1 Introduction 2 THORP: An Operational History 4 THORP: A Political History 11 THORP: A Chronology 1974 to 2018 21 Endnotes 26 About the authors 29 About the IPFM The International Panel on Fissile Materials (IPFM) was founded in January 2006 and is an independent group of arms control and nonproliferation experts from both nuclear- weapon and non-nuclear-weapon states. The mission of the IPFM is to analyze the technical basis for practical and achievable pol- icy initiatives to secure, consolidate, and reduce stockpiles of highly enriched uranium and plutonium. These fissile materials are the key ingredients in nuclear weapons, and their control is critical to achieving nuclear disarmament, to halting the proliferation of nuclear weapons, and to ensuring that terrorists do not acquire nuclear weapons. Both military and civilian stocks of fissile materials have to be addressed. The nuclear- weapon states still have enough fissile materials in their weapon stockpiles for tens of thousands of nuclear weapons. On the civilian side, enough plutonium has been sepa- rated to make a similarly large number of weapons.
    [Show full text]
  • Industry Background
    Appendix 2.2: Industry background Contents Page Introduction ................................................................................................................ 1 Evolution of major market participants ....................................................................... 1 The Six Large Energy Firms ....................................................................................... 3 Gas producers other than Centrica .......................................................................... 35 Mid-tier independent generator company profiles .................................................... 35 The mid-tier energy suppliers ................................................................................... 40 Introduction 1. This appendix contains information about the following participants in the energy market in Great Britain (GB): (a) The Six Large Energy Firms – Centrica, EDF Energy, E.ON, RWE, Scottish Power (Iberdrola), and SSE. (b) The mid-tier electricity generators – Drax, ENGIE (formerly GDF Suez), Intergen and ESB International. (c) The mid-tier energy suppliers – Co-operative (Co-op) Energy, First Utility, Ovo Energy and Utility Warehouse. Evolution of major market participants 2. Below is a chart showing the development of retail supply businesses of the Six Large Energy Firms: A2.2-1 Figure 1: Development of the UK retail supply businesses of the Six Large Energy Firms Pre-liberalisation Liberalisation 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014
    [Show full text]
  • The Long Term Storage of Advanced Gas-Cooled Reactor (Agr) Fuel Xa9951796 P.N
    IAEA-SM-352/28 THE LONG TERM STORAGE OF ADVANCED GAS-COOLED REACTOR (AGR) FUEL XA9951796 P.N. STANDRING Thorp Technical Department, British Nuclear Fuels pic, Sellafield, Seascale, Cumbria, United Kingdom Abstract The approach being taken by BNFL in managing the AGR lifetime spent fuel arisings from British Energy reactors is given. Interim storage for up to 80 years is envisaged for fuel delivered beyond the life of the Thorp reprocessing plant. Adopting a policy of using existing facilities, to comply with the principles of waste minimisation, has defined the development requirements to demonstrate that this approach can be undertaken safely and business issues can be addressed. The major safety issues are the long term integrity of both the fuel being stored and structure it is being stored in. Business related issues reflect long term interactions with the rest of the Sellafield site and storage optimisation. Examples of the developement programme in each of these areas is given. 1. INTRODUCTION British Nuclear Fuels (BNFL) has been contracted to manage the lifetime irradiated AGR fuel arisings from British Energy reactors1. The agreement formulated is a mixture of reprocessing (covering the planned life of the Thorp reprocessing plant) and interim storage for the remainder of the fuel arisings. Interim storage is projected to be up to 80 years to comply with direct disposal acceptance criteria and projected repository availability. Eighty years represents a significant increase in storage times compared to current operational experience; of around 18 years. Confidence that AGR fuel can be stored safely for extended periods has been provided by our experience of storing AGR fuel to date and the supporting research and development programmes initiated in the late 1970's for wet storage and 1990's in the case of Scottish Nuclear (SNL) dry storage project.
    [Show full text]
  • New Nuclear Power Industry Procurement Markets
    Research Monograph 2014-01 2014 Edited by Edited Geoffrey Rothwell Geoffrey and Nam Ilchong New Nuclear Power Industry Procurement Markets: International Edited by Ilchong Nam and Experiences Geoffrey Rothwell korea develoPMeNt INstItute International Experiences International Markets: Procurement Industry Power Nuclear New ISBN 978-89-8063-902-1 연구시리즈_남일총_Procurement_최종.indd 1 2014.12.23 2:22:19 PM Research- Monograph 2014-01 New Nuclear Power Industry Procurement Markets: International Experiences Edited by Ilchong Nam and Geoffrey Rothwell ⓒ December 2014 Korea Development Institute 15, Giljae-gil, Sejong-si 339-007, Korea ISBN 978-89-8063-902-1 (93320) Price: =8,600 ▌ Preface ▌ Despite the uncertainties about the cost and nuclear reactor melt- downs, nuclear power remains one of the major energy sources in many industrialized countries. Nuclear power is one of the major low carbon energy sources that many developing countries hope to de- pend on in the future. Ensuring the safety and efficiency of nuclear power generation is vital to the economic performance of many countries and their citizens. Efficiency and safety of this technology depends on many factors. One of the crucial safety and efficiency factors of nuclear power generation is the performance of the pro- curement market in which parts, components, and services to build and operate nuclear power plants are traded. In particular, perfor- mance of the market in which safety related parts and components are traded is crucial to the efficiency and safety of nuclear power generation. Despite the importance of the procurement market for nuclear power generation, there have been few economic studies on this issue.
    [Show full text]
  • NRC Collection of Abbreviations
    I Nuclear Regulatory Commission c ElLc LI El LIL El, EEELIILE El ClV. El El, El1 ....... I -4 PI AVAILABILITY NOTICE Availability of Reference Materials Cited in NRC Publications Most documents cited in NRC publications will be available from one of the following sources: 1. The NRC Public Document Room, 2120 L Street, NW., Lower Level, Washington, DC 20555-0001 2. The Superintendent of Documents, U.S. Government Printing Office, P. 0. Box 37082, Washington, DC 20402-9328 3. The National Technical Information Service, Springfield, VA 22161-0002 Although the listing that follows represents the majority of documents cited in NRC publica- tions, it is not intended to be exhaustive. Referenced documents available for inspection and copying for a fee from the NRC Public Document Room include NRC correspondence and internal NRC memoranda; NRC bulletins, circulars, information notices, inspection and investigation notices; licensee event reports; vendor reports and correspondence; Commission papers; and applicant and licensee docu- ments and correspondence. The following documents in the NUREG series are available for purchase from the Government Printing Office: formal NRC staff and contractor reports, NRC-sponsored conference pro- ceedings, international agreement reports, grantee reports, and NRC booklets and bro- chures. Also available are regulatory guides, NRC regulations in the Code of Federal Regula- tions, and Nuclear Regulatory Commission Issuances. Documents available from the National Technical Information Service Include NUREG-series reports and technical reports prepared by other Federal agencies and reports prepared by the Atomic Energy Commission, forerunner agency to the Nuclear Regulatory Commission. Documents available from public and special technical libraries include all open literature items, such as books, journal articles, and transactions.
    [Show full text]
  • Annex D Major Events in the Energy Industry
    Annex D Major events in the Energy Industry 2018 Energy Prices In February 2018 the Domestic Gas and Electricity (Tariff Cap) Bill was introduced to Parliament, which will put in place a requirement on the independent regulator, Ofgem, to cap energy tariffs until 2020. It will mean an absolute cap can be set on poor value tariffs, protecting the 11 million households in England, Wales and Scotland who are currently on a standard variable or other default energy tariff and who are not protected by existing price caps. An extension to Ofgem’s safeguard tariff cap was introduced in February 2018 which will see a further one million more vulnerable consumers protected from unfair energy price rises. Nuclear In June 2018 the Government announced a deal with the nuclear sector to ensure that nuclear energy continues to power the UK for years to come through major innovation, cutting-edge technology and ensuring a diverse and highly-skilled workforce. Key elements include: • a £200 million Nuclear Sector Deal to secure the UK’s diverse energy mix and drive down the costs of nuclear energy meaning cheaper energy bills for customers; • a £32 million boost from government and industry to kick-start a new advanced manufacturing programme including R&D investment to develop potential world-leading nuclear technologies like advanced modular reactors; • a commitment to increasing gender diversity with a target of 40% women working in the civil nuclear sector by 2030. 2017 Energy Policy In October 2017 the Government published The Clean Growth Strategy: Leading the way to a low carbon future, which aims to cut emissions while keeping costs down for consumers, creating good jobs and growing the economy.
    [Show full text]
  • At Work 2017 Edition
    At Work 2017 edition Foreword Year in review In 2016 the global nuclear industry The World Nuclear Association works future industry leaders. The 2016 continued the steady progress recorded towards this priority through the Summer Institute was held in Canada in 2015, with ten new units (totalling Harmony programme. This has entered and the University also organised four 9579 MWe) connected to the grid. a new stage with the establishment short courses in Malaysia, South Korea, Five of these new connections were of three work areas: achieving a level China and Romania. in China with one each in Russia, playing field in global electricity markets, Pakistan, India, South Korea and the harmonizing international regulatory In terms of new initiatives, our firstWorld USA. The dominance of Asian countries processes, and developing a more Nuclear Performance Report made an and especially China in new nuclear effective safety paradigm. important impact. This report series construction evidently remains an targeted at industry and international important trend. The Harmony programme is integrated organizations provides an up-to-date with our existing industry cooperation, factual picture of the nuclear power For the second year running, the nuclear information and communication sector today. We also launched the industry was on the right path for activities – all of which saw steady Nuclear Footprints advocacy campaign, achieving the Harmony goal of 1000 improvement in 2016. A special mention a collection of five short animations GWe of new nuclear added to reach goes to the Regional Workshops led by which describe nuclear energy in terms 25% of global electricity by 2050.
    [Show full text]
  • Copyrighted Material
    CHAPTER 1 Energy Sources, Grid Compatibility, Economics, and the Environment 1.1 BACKGROUND If the industries and accustomed lifestyles of the economically well- developed nations are to be preserved, their aging high-capacity (0100 MW) electric power plants will soon require replacement with reliable units having lower carbon emissions and environmental impacts. Legally binding national targets [1] on carbon emissions were set out by the European Union in 2008 to mitigate their now unequivocal effect on global climate change. In 2009, the UK’s Department of Energy and Climate Change [1] announced ambitious plans for a 34% reduction in carbon emissions by 2020. The principal renewable energy sources of Geothermal, Hydro-, Solar, Tidal and Wind are now being investigated worldwide with regard to their contribution towards a “greener planet.” Their economics and those for conventional electricity generation are usually compared in terms of a LevelizedCOPYRIGHTED Cost which is the sum of thoseMATERIAL for capital investment, operation, maintenance and decommissioning using Net Present-day Values. Because some proposed systems are less well-developed for commercial application (i.e., riskier) than others, or are long term in the Nuclear Electric Power: Safety, Operation, and Control Aspects, First Edition. J. Brian Knowles. Ó 2014 John Wiley & Sons, Inc. Published 2014 by John Wiley & Sons, Inc. 1 2 CHAPTER 1 Energy Sources, Grid Compatibility, Economics sense of capitally intensive before any income accrues, the now necessary investment of private equity demands a matching cash return [52]. Also in this respect the electric power output from any generator has a degree of intermittency measured by Capacity Factor , ðAnnual Energy OutputÞ=ðAnnual Output at Max: PowerÞ (1.1) These aspects are included as discounted cash flows in a Capital Asset Pricing Model that assesses the commercial viability of a project with respect to its capital repayment period.
    [Show full text]