DOCSLIB.ORG

Hazardous Substance Fact Sheet

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Hazardous Substance Fact Sheet Right to Know Hazardous Substance Fact Sheet Common Name: CARBON BLACK Synonyms: C.I. Pigment Black 7; Channel Black; Lamp Black CAS Number: 1333-86-4 Chemical Name: Carbon Black RTK Substance Number: 0342 Date: December 2007 Revision: November 2016 DOT Number: UN 1361 Description and Use EMERGENCY RESPONDERS >>>> SEE BACK PAGE Carbon Black is black, odorless, finely divided powder Hazard Summary generated from the incomplete combustion of Hydrocarbons. It Hazard Rating NJDOH NFPA may contain Polycyclic Aromatic Hydrocarbons (PAHs) which HEALTH 3 - are formed during its manufacture and become adsorbed on FLAMMABILITY 1 - the Carbon Black. It is used in making tire treads, in abrasion REACTIVITY 0 - resistant rubber products, and as a pigment for paints and inks. CARCINOGEN SPONTANEOUSLY COMBUSTIBLE PARTICULATE POISONOUS GASES ARE PRODUCED IN FIRE Reasons for Citation Hazard Rating Key: 0=minimal; 1=slight; 2=moderate; 3=serious; Carbon Black is on the Right to Know Hazardous 4=severe Substance List because it is cited by OSHA, ACGIH, NIOSH and IARC. Carbon Black can affect you when inhaled. This chemical is on the Special Health Hazard Substance Carbon Black should be handled as a CARCINOGEN-- List as it is considered a carcinogen. WITH EXTREME CAUTION. Contact can irritate the skin and eyes. Inhaling Carbon Black can irritate the nose, throat and lungs. Finely dispersed Carbon Black particles may form explosive mixtures in air. SEE GLOSSARY ON PAGE 5. FIRST AID Workplace Exposure Limits Eye Contact OSHA: The legal airborne permissible exposure limit (PEL) is Immediately flush with large amounts of water for at least 15 3.5 mg/m3 averaged over an 8-hour workshift. minutes, lifting upper and lower lids. Remove contact lenses, if worn, while rinsing. NIOSH: The recommended airborne exposure limit (REL) is Skin Contact 3.5 mg/m3 averaged over a 10-hour workshift. Remove contaminated clothing and wash contaminated skin with soap and water. NIOSH: The recommended airborne exposure limit (REL) is 0.1 mg PAHs/m3 (as the Cyclohexane-extractable Inhalation Remove the person from exposure. fraction) for Carbon Black in the presence of Begin rescue breathing (using universal precautions) if Polycyclic Aromatic Hydrocarbons averaged over a breathing has stopped and CPR if heart action has stopped. 10-hour workshift. Transfer promptly to a medical facility. ACGIH: The threshold limit value (TLV) is 3.0 mg/m3 averaged over an 8-hour workshift. EMERGENCY NUMBERS Poison Control: 1-800-222-1222 Carbon Black may be a CARCINOGEN in humans. There may be no safe level of exposure to a carcinogen, so all CHEMTREC: 1-800-424-9300 contact should be reduced to the lowest possible level. NJDEP Hotline: 1-877-927-6337 National Response Center: 1-800-424-8802 CARBON BLACK Page 2 of 6 Determining Your Exposure Reproductive Hazard According to the information presently available to the New Read the product manufacturer’s Material Safety Data Jersey Department of Health, Carbon Black has not been Sheet (MSDS) and the label to determine product tested for its ability to affect reproduction. ingredients and important safety and health information about the product mixture. Other Effects Carbon Black can irritate the lungs. Repeated exposure For each individual hazardous ingredient, read the New may cause bronchitis to develop with coughing, phlegm, Jersey Department of Health Hazardous Substance Fact and/or shortness of breath. Sheet, available on the RTK Program website (http://nj.gov/health/workplacehealthandsafety/right-to- know/) or in your facility’s RTK Central File or Hazard Medical Communication Standard file. Medical Testing You have a right to this information under the New Jersey For frequent or potentially high exposure (half the PEL or Worker and Community Right to Know Act, the Public greater), the following are recommended before beginning Employees Occupational Safety and Health (PEOSH) Act work and at regular times after that: if you are a public worker in New Jersey, and under the federal Occupational Safety and Health Act (OSHA) if you Chest x-ray and lung function tests are a private worker. Any evaluation should include a careful history of past and The New Jersey Right to Know Act and the PEOSH present symptoms with an exam. Medical tests that look for Hazard Communication Standard (N.J.A.C. 12:100-7) damage already done are not a substitute for controlling requires most employers to label chemicals in the exposure. workplace and requires public employers to provide their employees with information concerning chemical hazards Request copies of your medical testing. You have a legal right to this information under the OSHA Access to Employee and controls. The federal OSHA Hazard Communication Exposure and Medical Records Standard (29 CFR 1910.1020). Standard (29 CFR 1910.1200) requires private employers to provide similar information and training to their Mixed Exposures employees. Smoking can cause heart disease, lung cancer, emphysema, and other respiratory problems. It may worsen This Fact Sheet is a summary of available information respiratory conditions caused by chemical exposure. Even if regarding the health hazards that may result from exposure. you have smoked for a long time, stopping now will reduce Duration of exposure, concentration of the substance and other your risk of developing health problems. factors will affect your susceptibility to any of the potential effects described below. Health Hazard Information Acute Health Effects The following acute (short-term) health effects may occur immediately or shortly after exposure to Carbon Black: Contact can irritate the skin and eyes. Inhaling Carbon Black can irritate the nose and throat causing coughing and wheezing. Chronic Health Effects The following chronic (long-term) health effects can occur at some time after exposure to Carbon Black and can last for months or years: Cancer Hazard Carbon Black may be a CARCINOGEN in humans since it has been shown to cause lung cancer in animals. Many scientists believe there is no safe level of exposure to a carcinogen. Carcinogens, potential carcinogens and mutagens may have the potential for causing reproductive damage in humans. CARBON BLACK Page 3 of 6 Workplace Controls and Practices Eye Protection Very toxic chemicals, or those that are reproductive hazards or Wear dust proof goggles when working with powders or dust sensitizers, require expert advice on control measures if a less unless full facepiece respiratory protection is worn. toxic chemical cannot be substituted. Control measures Wear a face shield along with goggles when working with include: (1) enclosing chemical processes for severely corrosive, highly irritating or toxic substances. irritating and corrosive chemicals, (2) using local exhaust Contact lenses should not be worn when working with this ventilation for chemicals that may be harmful with a single substance. exposure, and (3) using general ventilation to control exposures to skin and eye irritants. For further information on Respiratory Protection workplace controls, consult the NIOSH document on Control Improper use of respirators is dangerous. Respirators Banding at www.cdc.gov/niosh/topics/ctrlbanding/. should only be used if the employer has implemented a written program that takes into account workplace conditions, The following work practices are also recommended: requirements for worker training, respirator fit testing, and medical exams, as described in the OSHA Respiratory Label process containers. Provide employees with hazard information and training. Protection Standard (29 CFR 1910.134). Monitor airborne chemical concentrations. Use engineering controls if concentrations exceed Where the potential exists for exposure over 3.0 mg/m3, use recommended exposure levels. a NIOSH approved air-purifying, particulate filter respirator Provide eye wash fountains and emergency showers. with an N95 filter. More protection is provided by a full Wash or shower if skin comes in contact with a hazardous facepiece respirator than by a half-mask respirator, and even material. greater protection is provided by a powered-air purifying Always wash at the end of the workshift. respirator. Change into clean clothing if clothing becomes Leave the area immediately if (1) while wearing a filter or contaminated. cartridge respirator you can smell, taste, or otherwise detect Do not take contaminated clothing home. Carbon Black, (2) while wearing particulate filters abnormal Get special training to wash contaminated clothing. resistance to breathing is experienced, or (3) eye irritation Do not eat, smoke, or drink in areas where chemicals are occurs while wearing a full facepiece respirator. Check to being handled, processed or stored. make sure the respirator-to-face seal is still good. If it is, Wash hands carefully before eating, smoking, drinking, replace the filter or cartridge. If the seal is no longer good, applying cosmetics or using the toilet. you may need a new respirator. Consider all potential sources of exposure in your workplace. In addition, the following may be useful or required: You may need a combination of filters, prefilters or cartridges to protect against different forms of a chemical (such as vapor and mist) or against a mixture of chemicals. Before entering a confined space where Carbon Black 3 powder or dust may be present, check to make sure that an Where the potential exists for exposure over 30 mg/m , use explosive concentration does not exist.
Load more

Recommended publications
  • Carbon Additives for Polymer Compounds
    Polymers Carbon Additives for Polymer Compounds Conductive Carbon Black Graphite & Coke www.timcal.com 1 Who are we? TIMCAL Graphite & Carbon has a strong tra- agement and continuous process improve- dition and history in carbon manufacturing. Its ment, all TIMCAL manufacturing plants comply first manufacturing operation was founded in with ISO 9001-2008. 1908. TIMCAL Graphite & Carbon is committed to Today, TIMCAL facilities produce and market a produce highly specialized graphite and car- large variety of synthetic and natural graphite bon materials for today’s and tomorrow’s cus- powders, conductive carbon blacks and water- tomers needs. based dispersions of consistent high quality. TIMCAL Graphite & Carbon is a member of IMERYS, Adhering to a philosophy of Total Quality Man- a world leader in adding value to minerals. Where are we located? With headquarters located in Switzerland, TIMCAL The Group’s industrial and commercial activities Graphite & Carbon has an international pres- are managed by an experienced multinational ence with production facilities and commercial team of more than 430 employees from many offices located in key markets around the globe. countries on three continents. HQ Bodio, Switzerland Willebroek, Belgium Lac-des-Îles, Canada Terrebonne, Canada Graphitization & pro- Manufacturing & pro- Mining, purification and Exfoliation of natural cessing of synthetic cessing of conductive sieving of natural graphite, processing of graphite, manufacturing carbon black graphite flakes natural and synthetic of water-based
    [Show full text]
  • Carbon Nanomaterials: Building Blocks in Energy Conversion Devices
    Mimicking Photosynthesis Carbon nanostructure-based donor- acceptor molecular assemblies can be engineered to mimic natural photo- synthesis. Fullerene C60 is an excellent electron acceptor for the design of donor-bridge-acceptor molecular systems. Photoinduced charge transfer processes in fullerene-based dyads and triads have been extensively investigated by several research groups during the last decade. In these cases the excited C60 accepts an electron from the linked donor group Carbon Nanomaterials: to give the charge-separated state under visible light excitation. Photoinduced charge separation in these dyads has Building Blocks in Energy been achieved using porphyrins, phtha- locyanine, ruthenium complexes, ferro- cene, and anilines as electron donors. Conversion Devices The rate of electron transfer and by Prashant Kamat charge separation efficiency is dependent on the molecular configuration, redox Carbon nanotubes, fullerenes, and mesoporous carbon potential of the donor, and the medium. Clustering the fullerene-donor systems structures constitute a new class of carbon nanomaterials with provides a unique way to stabilize properties that differ signifi cantly from other forms of carbon electron transfer products. The stability of C anions in cluster forms opens such as graphite and diamond. The ability to custom synthesize 60 up new ways to store and transport nanotubes with attached functional groups or to assemble photochemically harnessed charge. fullerene (C60 and analogues) clusters into three-dimensional Novel organic solar cells have (3D) arrays has opened up new avenues to design high surface been constructed by quaternary area catalyst supports and materials with high photochemical self-organization of porphyrin and fullerenes with gold nanoparticles. and electrochemical activity.
    [Show full text]
  • Acid-Base Properties of Carbon Black Surfaces Roy Eugene Test Iowa State University
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Digital Repository @ Iowa State University Ames Laboratory Technical Reports Ames Laboratory 5-1961 Acid-base properties of carbon black surfaces Roy Eugene Test Iowa State University Robert S. Hansen Iowa State University Follow this and additional works at: http://lib.dr.iastate.edu/ameslab_isreports Part of the Chemistry Commons Recommended Citation Test, Roy Eugene and Hansen, Robert S., "Acid-base properties of carbon black surfaces" (1961). Ames Laboratory Technical Reports. 43. http://lib.dr.iastate.edu/ameslab_isreports/43 This Report is brought to you for free and open access by the Ames Laboratory at Iowa State University Digital Repository. It has been accepted for inclusion in Ames Laboratory Technical Reports by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Acid-base properties of carbon black surfaces Abstract The urs face properties of carbon blacks reflect not only Van der Waals forces due to carbon, but also chemical properties of groups formed on carbon black surfaces by reactions with environmental substances (e.g. water, oxygen, etc.). The present work constitutes a study of such groups. Disciplines Chemistry This report is available at Iowa State University Digital Repository: http://lib.dr.iastate.edu/ameslab_isreports/43 I IS-341 ACID-BASE PROPERTIES OF CARBON BLACK SURFACES By Roy Eugene Test Robert S. Hansen May 196 1 Ames Laboratory Iowa State University I Ames, Iowa :· : :· .. : :· :. ': •. :· ·:· ·:: .: •. :' . :, ·: :· ': F. H. Spedding, Director, Ames Laboratory. Work performed under Contract No. W-7405-eng-82.
    [Show full text]
  • Defence Applications of New Forms of Carbon
    FOI-R--1103--SE December 2003 ISSN 1650-1942 Base data report S.J. Savage Defence applications of new forms of carbon Schematic model of the C60 fullerene molecule (Fagerström, 2003) Sensor Technology SE-581 11 Linköping SWEDISH DEFENCE RESEARCH AGENCY FOI-R--1103--SE Sensor Technology December 2003 P.O. Box 1165 ISSN 1650-1942 SE-581 11 Linköping Base data report S.J. Savage Defence applications of new forms of carbon Issuing organization Report number, ISRN Report type FOI – Swedish Defence Research Agency FOI-R--1103--SE Base data report Sensor Technology Research area code P.O. Box 1165 7. Vehicles SE-581 11 Linköping Month year Project no. December 2003 E3037 Customers code 5. Commissioned Research Sub area code 74 Materials technology Author/s (editor/s) Project manager S.J. Savage S.J. Savage Approved by Sponsoring agency Scientifically and technically responsible Report title Defence applications of new forms of carbon Abstract (not more than 200 words) This report briefly reviews some applications of new forms of carbon (fullerenes, carbon nanotubes and nanofibres) in military technology. Selected reports are summarised and discussed, and a number of military applications suggested. The report contains recommendations for future studies. Keywords nanotechnology, carbon, defence applications, nanotubes, fullerenes Further bibliographic information Language English ISSN 1650-1942 Pages 15 p. Price acc. to pricelist 2 Utgivare Rapportnummer, ISRN Klassificering Totalförsvarets Forskningsinstitut - FOI FOI-R--1103--SE Underlagsrapport Sensorteknik Forskningsområde Box 1165 7. Farkoster 581 11 Linköping Månad, år Projektnummer December 2003 E3037 Verksamhetsgren 5. Uppdragsfinansierad verksamhet Delområde 74 Materialteknik Författare/redaktör Projektledare S.J.
    [Show full text]
  • A Post-Buckminsterfullerene View of Carbon Chemistry
    A POST-BUCKMINSTERFULLERENE VIEW OF CARBON CHEMISTRY Harold Kroto School of Chemistry and Molecular Sciences, University of Sussex, Brighton, BNI 9QJ UK Keywords: Cs0, Fullerenes, carbon particles INTRODUCTION The discovery of c60 Buckminsterfullerene, Fig 1, has its origins in a research programme involving synthetic chemistry, microwave spectroscopy and radioastronomyl. In 1915, at Sussex (with David Walton), the long chain polyyne H-CeC-CsC-CsN was synthesised and studied by microwave spectroscopy. Subsequently, with Takeshi Oka and NRC(0ttawa) astronomers, the molecule was discovered in space, Fig 2, by radioastronomy using the laboratory microwave frequencies. This discovery led on to the detection of the even longer carbon chain molecules HCTN, HCgN and HCl.lN in the space between the stars2. Further work aimed at understanding the formation of the chains in space focussed attention on the possibility that they are produced at the same time as carbon dust in red giant stars1,*. During experiments at Rice University in 1985 (with James Heath, Sean O'Brien, Robert Curl and Richard Smalley), designed to simulate the conditions in these stars and explore their capacity for carbon chain formation, the exciting discovery that C60 was remarkably stable was made3. It was found that under conditions where almost all the atoms in a carbon plasma had nucleated to form microparticles the molecule c60 remained behind - together with some CTO. This result was, as is now well 'known, rationalised on the basis of the closed cage structure shown in Fig 1. It was proposed that the geodesic and aromatic factors inherent in such a structure could account for the stability of the molecule.
    [Show full text]
  • Nanostructure Quantification of Carbon Blacks
    Journal of C Carbon Research Article Nanostructure Quantification of Carbon Blacks Madhu Singh and Randy L. Vander Wal * John and Willie Leone Family Department of Energy and Mineral Engineering and the Earth and Mineral Sciences (EMS) Energy Institute, Penn State University, University Park, State College, PA 16802, USA; [email protected] * Correspondence: [email protected]; Tel.: +1-814-865-5813 Received: 20 November 2018; Accepted: 21 December 2018; Published: 31 December 2018 Abstract: Carbon blacks are an extensively used manufactured product. There exist different grades by which the carbon black is classified, based on its purpose and end use. Different properties inherent to the various carbon black types are a result of their production processes. Based on the combustion condition and fuel used, each process results in a carbon black separate from those obtained from other processes. These carbons differ in their aggregate morphology, particle size, and particle nanostructure. Nanostructure is key in determining the material’s behavior in bulk form. A variety of carbon blacks have been analyzed and quantified for their lattice parameters and structure at the nanometer scale, using transmission electron microscopy and custom-developed fringe analysis algorithms, to illustrate differences in nanostructure and their potential relation to observed material properties. Keywords: carbon; nanostructure; HRTEM; fringe; quantification 1. Introduction Carbon black is manufactured elemental carbon with customized particle size and aggregate morphology [1]. Produced from the partial combustion or thermal decomposition of hydrocarbons, carbon black is an engineered material, primarily composed of >98% elemental carbon. This number may vary based on its production process and final desired application, where carbon black may be doped with other elements like oxygen, nitrogen, or sulfur to impart solubility, better dispersion or binding properties to the material.
    [Show full text]
  • Carbon-Based Nanomaterials/Allotropes: a Glimpse of Their Synthesis, Properties and Some Applications
    materials Review Carbon-Based Nanomaterials/Allotropes: A Glimpse of Their Synthesis, Properties and Some Applications Salisu Nasir 1,2,* ID , Mohd Zobir Hussein 1,* ID , Zulkarnain Zainal 3 and Nor Azah Yusof 3 1 Materials Synthesis and Characterization Laboratory (MSCL), Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia 2 Department of Chemistry, Faculty of Science, Federal University Dutse, 7156 Dutse, Jigawa State, Nigeria 3 Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia; [email protected] (Z.Z.); [email protected] (N.A.Y.) * Correspondence: [email protected] (S.N.); [email protected] (M.Z.H.); Tel.: +60-1-2343-3858 (M.Z.H.) Received: 19 November 2017; Accepted: 3 January 2018; Published: 13 February 2018 Abstract: Carbon in its single entity and various forms has been used in technology and human life for many centuries. Since prehistoric times, carbon-based materials such as graphite, charcoal and carbon black have been used as writing and drawing materials. In the past two and a half decades or so, conjugated carbon nanomaterials, especially carbon nanotubes, fullerenes, activated carbon and graphite have been used as energy materials due to their exclusive properties. Due to their outstanding chemical, mechanical, electrical and thermal properties, carbon nanostructures have recently found application in many diverse areas; including drug delivery, electronics, composite materials, sensors, field emission devices, energy storage and conversion, etc. Following the global energy outlook, it is forecasted that the world energy demand will double by 2050. This calls for a new and efficient means to double the energy supply in order to meet the challenges that forge ahead.
    [Show full text]
  • United States Patent Office Patented Sept
    3,274,258 United States Patent Office Patented Sept. 20, 1966 2 o, ox'-thiobis(2-n-heptyl-6-tert-butyl-p-cresol); 3,274,258 ox.c4'-thiobis 2-(3'-nonyl)-6-isopropyl-4-ethylphenol); HYDROXYBENZYL THOETHERS AND METHOD OF PREPARATION o,c'-thiobis(2-n-dodecyl-6-sec-butyl-p-cresol); Joseph D. Odenweiler, Birmingham, Mich., assignor to ox,c''-thiobis(2,6-di-tert-butyl-4-hydroxybenzyl); Ethyl Corporation, New York, N.Y., a corporation of 5 (3-isopropyl-5-tert-butyl-4-hydroxy-benzyl)-(3-ethyl-5- Virginia tert-butyl-4-hydroxybenzyl)-thio ether; No Drawing. Filed Sept. 1, 1960, Ser. No. 53,353 o,o'-thiobis(2-methyl-6-tert-butyl-4-(4'-hexylbenzyl)- 6 Ciains. (C. 260-609) phenol). The compounds of this invention are water insoluble, This invention deals with a novel class of compounds, O their preparation and their use as antioxidants. More white to yellow, crystalline solids. They are ashless, hy particularly, it relates to a novel and unusual class of sul drolytically stable and non-volatile, facilitating their in fur-containing substituted phenolic compounds, their prep corporation into a wide range of organic material. aration from the corresponding benzyl chlorides and the Although the compounds of this invention described in employment of these novel compounds as stabilizers and 5 the above formula, are those in which R5 and Rs are alkyl antioxidants for organic materials. radicals having from 1 to 12 carbon atoms, haloalkyl radi It is an object of this invention to provide a novel class cals having from 1 to 12 carbon atoms are also useful.
    [Show full text]
  • Fullerenes and Pahs: a Novel Model Explains Their Formation Via
    Fullerenes and PAHs: A Novel Model Explains their Formation via Sequential Cycloaddition Reactions Involving C2 Dimers Sylvain L. Smadja [email protected] 10364 Almayo Ave., Suite 304 Los Angeles, CA 90064 “Cove” region closure C20 bowl + 10C2 creates pentagonal ring C50 + 5C2 [2 + 2 + 2] [4 + 2] Cycloadditions Cycloadditions Cage 5C 5C 2 2 closure “Cove” region C40 C50 C60 Buckministerfullerene ABSTRACT: Based on a new understanding of the nature of the bonding in the C2 dimer, a novel bottom-up model is offered that can explain the growth processes of fullerenes and polycyclic aromatic hydrocarbons (PAHs). It is shown how growth sequences involving C2 dimers, that take place in carbon vapor, combustion systems, and the ISM, could give rise to a variety of bare carbon clusters. Among the bare carbon clusters thus formed, some could lead to fullerenes, while others, after hydrogenation, could lead to PAHs. We propose that the formation of hexagonal rings present in these bare carbon clusters are the result of [2+2+2] and [4+2] cycloaddition reactions that involve C2 dimers. In the C60 and C70 fullerenes, each of the twelve pentagons is surrounded by five hexagons and thereby “isolated” from each other. To explain why, we suggest that in bowl-shaped clusters the pentagons can form as the consequence of closures of “cove regions” that exist between hexagonal rings, and that they can also form during cage-closure, which results in the creation of six “isolated” pentagonal rings, and five hexagonal rings. The proposed growth mechanisms can account for the formation of fullerene isomers without the need to invoke the widely used Stone-Wales rearrangement.
    [Show full text]
  • What Is Carbon Black?
    What is Carbon Black? Focused. Innovative. Responsive. Contents 1 Introduction 4 1.1 About Orion Engineered Carbons 4 1.2 What is Carbon Black 7 2 Manufacturing Process 10 2.1 Raw Materials 12 2.2 Thermal-Oxidative Processes 14 2.2.1 Furnace Black Process 14 2.2.2 Degussa Gas Black Process 18 2.2.3 Lamp Black Process 19 2.2.4 Channel Black Process (historical) 20 2.3 Thermal Decomposition Processes 21 2.3.1 Thermal Black Process 21 2.3.2 Acetylene Black Process 22 2.4 Carbon Black Dispersions, Compounds, Plastic and Rubber Masterbatches 23 3 Properties of Carbon Black 24 3.1 General Physical and Chemical Properties 25 3.2 Definition of Carbon Black 27 3.3 Test Methods, Chemical and Physical Data 28 3.3.1 Determination of Surface Area 32 3.3.2 Determination of Structure 33 3.3.3 Colorimetric Characterization 33 3.3.4 Chemical and Physical Measurements 34 3.3.5 Physical Appearance and Handling Properties 34 3.4 Specifications and Quality Assurance 35 3.5 Characteristic Data of various Production Processes 36 4 Handling 38 5 Product Safety 40 5.1 Toxicology 40 5.2 Safety-Related Properties 41 6 Applications 42 6.1 Rubber Carbon Blacks 42 6.2 Specialty Carbon Blacks 44 3 3 1 Introduction 1.1 About Orion Engineered Carbons Who We Are? Orion Engineered Carbons (OEC) is one of the world’s leading suppliers of Carbon Black. We off er standard and high-performance products for coatings, printing inks, polymers, rubber and other applications.
    [Show full text]
  • Specialty Carbons for Polymer Compounds
    Polymers SPECIALTY CARBONS FOR POLYMER COMPOUNDS ENSACO® TIMCAL Carbon Black TIMREX® TIMCAL Graphite TIMREX® TIMCAL Coke TIMREX® TIMCAL Dispersion imerys-graphite-and-carbon.com Imerys Graphite & Carbon WHO ARE WE? IMERYS Graphite & Carbon has a strong tradition and history in carbon manufactur- ing. Its first manufacturing operation was founded in 1908. Today, IMERYS Graphite & Carbon facilities produce and market a large variety of synthetic and natural graphite powders, conductive carbon blacks and water-based dispersions of consistent high quality. Adhering to a philosophy of Total Quality Management and continuous process improve- ment, all Imerys Graphite & Carbon manufacturing plants comply with ISO 9001:2008. IMERYS Graphite & Carbon is committed to produce highly specialized graphite and carbon materials for today’s and tomorrow’s customers needs. IMERYS Graphite & Carbon belongs to IMERYS, the world leader in mineral-based specialties for industry. WHERE ARE With headquarters located in Switzerland, IMERYS Graphite & Carbon has an inter- WE LOCATED? national presence with production facilities and commercial offices located in key markets around the globe. The Group’s industrial and commercial activities are man- aged by an experienced multinational team of more than 430 employees from many countries on three continents. For the updated list of commercial offices and distributors please visit www.imerys-graphite-and-carbon.com Lac-des-Îles, Canada HQ Bodio, Switzerland Changzhou, China Mining, purification and sieving of Graphitization
    [Show full text]
  • Many Phases of Carbon
    GENERAL I ARTICLE Many Phases of Carbon B Gopalakrishnan and S V Subramanyam Introduction Carbon - the element known from prehistoric time, derives its name from Latin 'carbo' meaning charcoal. Carbon is known as the king of elements owing to its versatility and diversity in all fields, which is unquestionable. It is widely distributed in N a­ ture, from molecules of life to matter in outer cosmos. It holds B Gopalakrishnan is a the sixth place in the list of abundance in Universe. The exist­ research scholar pursuing PhD at the Department of ence of carbon and its role in natural mechanisms are aplenty. Physics, Indian Institute The biochemical mechanism responsible for life are very much of Science. His current dependent on the r,ole of carbon either directly or otherwise. research involves synthesis and studies on • Natural carbon exists in two isotopic forms as Cl2 and C13 The amorphous and crystalline nucleus of the abundant isotope of carbon -C is composed of carbon nitride system. l2 six protons and six neutrons. Neutral carbon atom is tetravalent and has totally six electrons with four of them occupying the outer orbit (2S2 2p2). In 1772, Antoine Lavoisier realised the allotropic forms of carbon by a famous experiment in which he found that burning a piece of diamond and a charcoal of equal mass yields the same S V Subramanyam is a amount of CO which made him conclude that charcoal and Professor at the Depart­ 2 ment of Physics, Indian diamond are indeed made up of the same element carbon. Institute of Science, Presently we know that diamond, graphite, fullerenes, carbon Bangalore.
    [Show full text]