Crank Handles Table of Contents

Crank handles Table of Contents

Crank handles 5 Table of contents

www.mparts.com • [email protected] • tel: +31(0)252 433733 1 Productoverview

AH01 AH10 AH02 AH11 AH03 Crank handles P. 5 P. 6 P. 7 P. 8 P. 9

AH04 AH12 AH13 AH14 AH15

P. 11 P. 13 P. 14 P. 15 P. 16

AH16 AH20 AH21 AH22 AH43

P. 17 P. 18 P. 19 P. 20 P. 21

AH45 AH47 AH49 AH50 AH51

P. 22 P. 23 P. 24 P. 25 P. 26

AH53 AH55 AH35 AH40 AH23

P. 27 P. 28 P. 29 P. 30 P. 31

AH24 AH25 AH36 AH41

P. 32 P. 33 P. 34 P. 35

www.mparts.com • [email protected] • tel: +31(0)252 433733 3 Ind. Crank handle, smooth revolv. handle AF32 (AH16) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main Insert: zinc plated steel blind bored bush (H10 tolerance); • side Insert: brass right through threaded bush; • spring: zinc plated steel; • fixing screw: black-oxyde treated screw with head for fitting screwdriver.

Characteristics: • surface: satin; • colour: black; • this crank handle has a rotating handle (AF32); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 L1 L2 L3 L4 L5 L6 L7 L8 L9 l

AH16.0539.0650 65 5 19,0 27 20 46 29 13 10,0 86 52 9,0 17 - 22 AH16.0539.0800 80 5 24,5 34 23 50 32 13 10,5 108 62 11,5 22 53 24 AH16.0539.1100 110 5 24,5 34 23 50 33 13 11,0 138 62 11,5 22 54 28

www.mparts.com • [email protected] • tel: +31(0)252 433733 17 Productoverview Crank handles

4 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle DIN 469 straight, handle AF35 (AH01) Crank handles

Description

Material: • handle body: cast iron (GG), plastic coated, black; nodular cast iron (GG+), plastic coated, black; • machine handle: steel, turned, zinc-coated by galvanization, passivated, DIN 39 F (AF35).

Characteristics: • DIN 469 straight with square end DIN 79 (H11 tolerance); • seam ground, blasted; • hub machined; • D1 in the table is the diameter of the machine handle; • this crank handle has a mounted machine handle (AF35).

Productcode L l1 D D1 d L1 L2 L3 l Material

AH01.1032.0630 63 10 20 16 10,5 20 15 74 13,1 Cast Iron+ AH01.1032.0800 80 10 24 18 10,5 24 18 94 13,1 Cast Iron AH01.1232.0800 80 12 24 18 12,6 24 18 94 16,1 Cast Iron AH01.1232.1000 100 12 28 20 12,6 28 21 98 16,1 Cast Iron AH01.1432.1000 100 14 28 20 14,7 28 21 98 18,1 Cast Iron AH01.1432.1250 125 14 34 22 14,7 34 26 120 18,1 Cast Iron AH01.1732.1250 125 17 34 22 17,9 34 26 120 22,2 Cast Iron AH01.1732.1600 160 17 38 25 17,9 38 29 122 22,2 Cast Iron AH01.1932.1600 160 19 38 25 20,0 38 29 122 25,2 Cast Iron AH01.1932.2000 200 19 44 28 20,0 44 34 154 25,2 Cast Iron AH01.2232.2000 200 22 44 28 23,1 44 34 154 28,2 Cast Iron AH01.2232.2500 250 22 48 32 23,1 48 36 157 28,2 Cast Iron AH01.2432.2500 250 24 48 32 25,3 48 36 157 32,2 Cast Iron

www.mparts.com • [email protected] • tel: +31(0)252 433733 5 Crank handle DIN 469 straight rotating AF36 (AH10) Crank handles

Description

Characteristics: • DIN 469 straight form with square end DIN 79 (H11 tolerance); • seam ground, blasted; • hub machined; • D1 in the table is the diameter of the machine handle; • This crank handle has a rotating machine handle (AF36).

Productcode L l1 D D1 d L1 L2 L3 l Material

AH10.1098.0630 63 10 20 16 10,5 20 15 79 13,1 Cast Iron+ AH10.1098.0800 80 10 24 18 10,5 24 18 97 13,1 Cast Iron AH10.1298.0800 80 12 24 18 12,6 24 18 97 16,1 Cast Iron AH10.1298.1000 100 12 28 20 12,6 28 21 100 16,1 Cast Iron AH10.1498.1000 100 14 28 20 14,7 28 21 100 18,1 Cast Iron AH10.1498.1250 125 14 34 22 14,7 34 26 122 18,1 Cast Iron AH10.1798.1250 125 17 34 22 17,9 34 26 122 22,2 Cast Iron AH10.1798.1600 160 17 38 25 17,9 38 29 126 22,2 Cast Iron AH10.1998.1600 160 19 38 25 20,0 38 29 126 25,2 Cast Iron AH10.1998.2000 200 19 44 28 20,0 44 34 160 25,2 Cast Iron AH10.2298.2000 200 22 44 28 23,1 44 34 160 28,2 Cast Iron AH10.2298.2500 250 22 48 32 23,1 48 36 162 28,2 Cast Iron AH10.2498.2500 250 24 48 32 25,3 48 36 162 32,2 Cast Iron

6 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle DIN 468 goose-neck handle AF35 (AH02) Crank handles

Description

Characteristics: • DIN 469 goose-neck form with square end DIN 79 (H11 tolerance); • seam ground, blasted; • hub machined; • D1 in the table is the diameter of the machine handle; • this crank handle has a mounted machine handle (AF35).

Productcode L l1 D D1 d L1 L2 L3 l Material

AH02.1032.0630 63 10 20 16 10,5 20 32 92 13,1 Cast Iron+ AH02.1032.0800 80 10 24 18 10,5 24 38 114 13,1 Cast Iron AH02.1232.0800 80 12 24 18 12,6 24 38 114 16,1 Cast Iron AH02.1232.1000 100 12 28 20 12,6 28 48 124 16,1 Cast Iron AH02.1432.1000 100 14 28 20 14,7 28 48 124 18,1 Cast Iron AH02.1432.1250 125 14 34 22 14,7 34 55 148 18,1 Cast Iron AH02.1732.1250 125 17 34 22 17,9 34 55 148 22,2 Cast Iron AH02.1732.1600 160 17 38 25 17,9 38 65 158 22,2 Cast Iron AH02.1932.1600 160 19 38 25 20,0 38 65 158 25,2 Cast Iron AH02.1932.2000 200 19 44 28 20,0 44 78 197 25,2 Cast Iron AH02.2232.2000 200 22 44 28 23,1 44 78 197 28,2 Cast Iron AH02.2232.2500 250 22 48 32 23,1 48 90 209 28,2 Cast Iron AH02.2432.2500 250 24 48 32 25,3 48 90 209 32,2 Cast Iron AH02.2532.5400 315 24 54 36 25,3 54 105 192 32,2 Cast Iron AH02.2832.5400 315 27 54 36 28,4 54 105 192 36,2 Cast Iron

www.mparts.com • [email protected] • tel: +31(0)252 433733 7 Crank handle DIN 468 rotating handle AF36 (AH11) Crank handles

Description

Characteristics: • DIN 468 goose-neck form with square end DIN 79 (H11 tolerance); • seam ground, blasted; • hub machined; • D1 in the table is the diameter of the machine handle; • This crank handle has a rotating machine handle (AF36).

Productcode L l1 D D1 d L1 L2 L3 l Material

AH11.1098.0630 63 10 20 16 10,5 20 32 96 13,1 Cast Iron+ AH11.1098.0800 80 10 24 18 10,5 24 38 116 13,1 Cast Iron AH11.1298.0800 80 12 24 18 12,6 24 38 116 16,1 Cast Iron AH11.1298.1000 100 12 28 20 12,6 28 48 126 16,1 Cast Iron AH11.1498.1000 100 14 28 20 14,7 28 48 126 18,1 Cast Iron AH11.1498.1250 125 14 34 22 14,7 34 55 150 18,1 Cast Iron AH11.1798.1250 125 17 34 22 17,9 34 55 150 22,2 Cast Iron AH11.1798.1600 160 17 38 25 17,9 38 65 160 22,2 Cast Iron AH11.1998.1600 160 19 38 25 20,0 38 65 160 25,2 Cast Iron AH11.1998.2000 200 19 44 28 20,0 44 78 202 25,2 Cast Iron AH11.2298.2000 200 22 44 28 23,1 44 78 202 28,2 Cast Iron AH11.2298.2500 250 22 48 32 23,1 48 90 214 28,2 Cast Iron AH11.2498.2500 250 24 48 32 25,3 48 90 214 32,2 Cast Iron AH11.2532.5400 315 24 54 36 25,3 54 105 186 32,2 Cast Iron AH11.2832.5400 315 27 54 36 28,4 54 105 186 36,2 Cast Iron

8 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle with rotating handle AF39 (AH03) Crank handles

Description

Material: • handle body: zinc die-cast, plastic coated, black, matt structure; aluminium, plastic coated, black, matt structure; • cylindrical handle: thermosetting plastic (PF 31), black.

Characteristics: • alternative to crank handles DIN 469 (AH10); • temperature rang up to a maximum of 80°C; • D2 in the table is the diameter of the machine handle; • this crank handle has a square end (H11 tolerance); • this crank handle has a rotating cylindrical handle (AF39).

Productcode L l1 D D1 D2 d L1 L2 L3 l Material

AH03.0832.0500 50 8 16 18 14 8,4 18 10 10 10,1 Zamac AH03.1062.0640 64 10 19 22 18 10,5 20 11 12 13,1 Zamac AH03.1062.0800 80 10 23 26 21 10,5 24 14 14 13,1 Zamac AH03.1024.0800 80 10 23 26 21 10,5 24 14 14 13,1 Aluminum AH03.1262.1000 100 12 27 30 23 12,6 28 17 15 16,1 Zamac AH03.1224.1000 100 12 27 30 23 12,6 28 17 15 16,1 Aluminum AH03.1424.1250 125 14 32 35 26 14,7 34 22 18 18,1 Aluminum AH03.1724.1600 160 17 35 39 26 17,9 38 26 18 22,2 Aluminum

www.mparts.com • [email protected] • tel: +31(0)252 433733 9 Crank handle with rotating handle AF39 (AH03) Crank handles

10 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle SST precision casting (AH04) Crank handles

Description

Material: • handle body: stainless steel 304 (1.4308); • cylindrical handle: thermosetting plastic (PF 31), black (AF39); • axle part: stainless steel (1.4301).

Characteristics: • flat side of the hub is machined; • D1 in the table is the diameter of the cylindrical handle; • this crank handle has a square end (H11 tolerance); • this crank handle has a rotating cylindrical handle (AF39).

Productcode L l1 l D D1 d L1 L2 L3 L4

AH04.1015.0800 80 10 13,1 22 18 10,5 22 64,5 15,4 6,6 AH04.1215.1000 100 12 16,1 26 21 12,6 26 78,5 17,7 8,3 AH04.1415.1250 125 14 18,1 28 23 14,7 28 95,5 18,8 9,2 AH04.1715.1600 160 17 22,2 32 23 17,9 32 99,5 22,6 9,4

www.mparts.com • [email protected] • tel: +31(0)252 433733 11 Crank handle SST precision casting (AH04) Crank handles

12 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle smooth insert rev. handle AF23 (AH12) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main Insert: zinc plated steel insert with smooth through-hole (H10 tolerance); • side Insert: brass right through threaded bush.

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • d2 in the table is the maximum size of the hole; • this crank handle has a rotating handle (AF23); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 d2 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH12.0537.0650 65 5 22 27 20 14 12 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH12.1037.0650 65 10 22 27 20 14 12 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH12.1237.0650 65 12 22 27 20 14 12 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH12.0537.0800 80 5 26 30 20 18 14 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH12.1037.0800 80 10 26 30 20 18 14 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH12.1237.0800 80 12 26 30 20 18 14 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH12.0837.1100 110 8 29 33 21 18 14 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH12.1037.1100 110 10 29 33 21 18 14 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH12.1237.1100 110 12 29 33 21 18 14 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH12.0837.1400 140 8 35 41 23 22 20 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH12.1237.1400 140 12 35 41 23 22 20 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH12.1437.1400 140 14 35 41 23 22 20 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH12.1637.1400 140 16 35 41 23 22 20 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH12.0837.1850 185 8 40 45 25 28 22 55 40 16,5 16,5 220 86 14,0 26,5 34 21 AH12.1237.1850 185 12 40 45 25 28 22 55 40 16,5 16,5 220 86 14,0 26,5 34 21

www.mparts.com • [email protected] • tel: +31(0)252 433733 13 Crank handle smooth insert rev. handle AF32 (AH13) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • d2 in the table is the maximum size of the hole; • this crank handle has a rotating handle (AF32); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 d2 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH13.0539.0650 65 5 22 27 20 14 12 30 17 13,0 8,0 88 52 9,5 18,0 20 10 AH13.1039.0650 65 10 22 27 20 14 12 30 17 13,0 8,0 88 52 9,5 18,0 20 10 AH13.1239.0650 65 12 22 27 20 14 12 30 17 13,0 8,0 88 52 9,5 18,0 20 10 AH13.0539.0800 80 5 26 30 20 18 14 33 19 13,0 9,0 106 52 11,0 21,5 24 9 AH13.1039.0800 80 10 26 30 20 18 14 33 19 13,0 9,0 106 52 11,0 21,5 24 9 AH13.1239.0800 80 12 26 30 20 18 14 33 19 13,0 9,0 106 52 11,0 21,5 24 9 AH13.0839.1100 110 8 29 33 23 18 14 39 22 14,0 11,0 138 62 12,0 22,0 28 11 AH13.1039.1100 110 10 29 33 23 18 14 39 22 14,0 11,0 138 62 12,0 22,0 28 11 AH13.1239.1100 110 12 29 33 23 18 14 39 22 14,0 11,0 138 62 12,0 22,0 28 11 AH13.0839.1400 140 8 35 41 25 22 20 49 34 16,0 15,0 174 72 13,5 25,5 30 19 AH13.1239.1400 140 12 35 41 25 22 20 49 34 16,0 15,0 174 72 13,5 25,5 30 19 AH13.1439.1400 140 14 35 41 25 22 20 49 34 16,0 15,0 174 72 13,5 25,5 30 19 AH13.1639.1400 140 16 35 41 25 22 20 49 34 16,0 15,0 174 72 13,5 25,5 30 19 AH13.0839.1800 185 8 40 45 25 28 22 55 40 16,5 16,5 220 82 14,0 26,5 34 21 AH13.1239.1850 185 12 40 45 25 28 22 55 40 16,5 16,5 220 82 14,0 26,5 34 21

14 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle smooth insert revolv handle AF30 (AH14) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • d2 in the table is the maximum size of the hole; • this crank handle has a rotating handle (AF30); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 d2 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH14.0539.0650 65 5 22 27 20 14 12 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH14.1239.0650 65 12 22 27 20 14 12 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH14.1039.0650 65 10 22 27 20 14 12 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH14.1039.0800 80 10 26 30 20 18 14 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH14.0539.0800 80 5 26 30 20 18 14 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH14.1239.0800 80 12 26 30 20 18 14 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH14.0839.1100 110 8 29 33 23 18 14 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH14.1239.1100 110 12 29 33 23 18 14 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH14.1039.1100 110 10 29 33 23 18 14 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH14.0839.1400 140 8 35 41 25 22 20 49 34 16,0 15,0 174 77 13,5 25,5 30 19 AH14.1239.1400 140 12 35 41 25 22 20 49 34 16,0 15,0 174 77 13,5 25,5 30 19 AH14.1639.1400 140 16 35 41 25 22 20 49 34 16,0 15,0 174 77 13,5 25,5 30 19 AH14.1439.1400 140 14 35 41 25 22 20 49 34 16,0 15,0 174 77 13,5 25,5 30 19 AH14.0839.1800 185 8 40 45 25 28 22 55 40 16,5 16,5 220 87 14,0 26,5 34 21 AH14.1239.1850 185 12 40 45 25 28 22 55 40 16,5 16,5 220 87 14,0 26,5 34 21

www.mparts.com • [email protected] • tel: +31(0)252 433733 15 Index crank handle smooth revol. handle AF23 (AH15) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • this crank handle has a rotating handle (AF23); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 L1 L2 L3 L4 L5 L6 L7 L8 L9 l

AH15.0539.0650 65 5 19,0 27 20,0 46 29 13 10,0 86 56 9,0 17 - 22 AH15.0539.0800 80 5 24,5 34 21,5 50 32 13 10,5 108 66 11,5 22 53 24 AH15.0539.1100 110 5 24,5 34 21,5 50 33 13 11,0 138 66 11,5 22 54 28

16 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle threaded insert rev. handle AF23 (AH20) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main insert: brass blind threaded bush; zinc plated steel blind threaded bush (at d = M16); • side insert: brass right through threaded bush (6H tolerantie).

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a rotating handle (AF23); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH20.0837.0650 65 M8 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 15 10 AH20.1037.0650 65 M10 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 15 10 AH20.1237.0650 65 M12 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 18 10 AH20.0837.0800 80 M8 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 18 9 AH20.1037.0800 80 M10 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 18 9 AH20.1237.0800 80 M12 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 18 9 AH20.1037.1100 110 M10 29 33 21 18 39 25 14,0 11,0 138 65 12,0 22,0 14 11 AH20.1237.1100 110 M12 29 33 21 18 39 25 14,0 11,0 138 65 12,0 22,0 18 11 AH20.1437.1100 110 M14 29 33 21 18 39 25 14,0 11,0 138 65 12,0 22,0 18 11 AH20.1237.1400 140 M12 35 41 23 22 49 33 16,0 15,0 174 76 13,5 25,5 19 19 AH20.1437.1400 140 M14 35 41 23 22 49 33 16,0 15,0 174 76 13,5 25,5 19 19 AH20.1637.1400 140 M16 35 41 23 22 49 33 16,0 15,0 174 76 13,5 25,5 19 19 AH20.1237.1800 185 M12 40 45 25 28 55 40 16,5 16,5 220 86 14,0 26,5 17 21 AH20.1437.1800 185 M14 40 45 25 28 55 40 16,5 16,5 220 86 14,0 26,5 19 21 AH20.1637.1800 185 M16 40 45 25 28 55 40 16,5 16,5 220 86 14,0 26,5 18 21

18 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle threaded insert rev. handle AF32 (AH21) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • central cap: grey ABS (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a rotating handle (AF32); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH21.0837.0650 65 M8 22 27 20 14 30 17 13,0 8,0 88 52 9,5 18,0 15 10 AH21.1037.0650 65 M10 22 27 20 14 30 17 13,0 8,0 88 52 9,5 18,0 15 10 AH21.1237.0650 65 M12 22 27 20 14 30 17 13,0 8,0 88 52 9,5 18,0 18 10 AH21.0837.0800 80 M8 26 30 20 18 33 19 13,0 9,0 106 52 11,0 21,5 18 9 AH21.1037.0800 80 M10 26 30 20 18 33 19 13,0 9,0 106 52 11,0 21,5 18 9 AH21.1237.0800 80 M12 26 30 20 18 33 19 13,0 9,0 106 52 11,0 21,5 18 9 AH21.1037.1100 110 M10 29 33 23 18 39 25 14,0 11,0 138 62 12,0 22,0 14 11 AH21.1237.1100 110 M12 29 33 23 18 39 25 14,0 11,0 138 62 12,0 22,0 18 11 AH21.1437.1100 110 M14 29 33 23 18 39 25 14,0 11,0 138 62 12,0 22,0 18 11 AH21.1237.1400 140 M12 35 41 25 22 49 33 16,0 15,0 174 72 13,5 25,5 19 19 AH21.1437.1400 140 M14 35 41 25 22 49 33 16,0 15,0 174 72 13,5 25,5 19 19 AH21.1637.1400 140 M16 35 41 25 22 49 33 16,0 15,0 174 72 13,5 25,5 19 19 AH21.1237.1800 185 M12 40 45 25 28 55 40 16,5 16,5 220 82 14,0 26,5 17 21 AH21.1437.1800 185 M14 40 45 25 28 55 40 16,5 16,5 220 82 14,0 26,5 19 21 AH21.1637.1800 185 M16 40 45 25 28 55 40 16,5 16,5 220 82 14,0 26,5 18 21

www.mparts.com • [email protected] • tel: +31(0)252 433733 19 Crank handle threaded insert rev. handle AF30 (AH22) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a rotating handle (AF30); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH22.0837.0650 65 M8 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 15 10 AH22.1037.0650 65 M10 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 15 10 AH22.1237.0650 65 M12 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 18 10 AH22.0837.0800 80 M8 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 18 9 AH22.1037.0800 80 M10 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 18 9 AH22.1237.0800 80 M12 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 18 9 AH22.1037.1100 110 M10 29 33 23 18 39 25 14,0 11,0 138 66 12,0 22,0 14 11 AH22.1237.1100 110 M12 29 33 23 18 39 25 14,0 11,0 138 66 12,0 22,0 18 11 AH22.1437.1100 110 M14 29 33 23 18 39 25 14,0 11,0 138 66 12,0 22,0 18 11 AH22.1237.1400 140 M12 35 41 25 22 49 33 16,0 15,0 174 77 13,5 25,5 19 19 AH22.1437.1400 140 M14 35 41 25 22 49 33 16,0 15,0 174 77 13,5 25,5 19 19 AH22.1637.1400 140 M16 35 41 25 22 49 33 16,0 15,0 174 77 13,5 25,5 19 19 AH22.1237.1800 185 M12 40 45 25 28 55 40 16,5 16,5 220 87 14,0 26,5 17 21 AH22.1437.1800 185 M14 40 45 25 28 55 40 16,5 16,5 220 87 14,0 26,5 19 21 AH22.1637.1800 185 M16 40 45 25 28 55 40 16,5 16,5 220 87 14,0 26,5 18 21

20 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle hexagonal hole rev. handle AF23 (AH43) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main insert: black-oxide treated insert, with hexagonal through-hole (H10 tolerance); • side laterale: brass right through threaded bush.

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a hexagonal through-hole; • this crank handle has a rotating handle (AF23); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH43.0639.0650 65 6 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH43.0839.0650 65 8 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH43.1039.0800 80 10 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH43.1239.0800 80 12 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH43.1239.1100 110 12 29 33 21 18 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH43.1439.1100 110 14 29 33 21 18 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH43.1439.1400 140 14 35 41 23 22 49 34 16,5 15,0 174 76 13,5 25,5 30 19 AH43.1639.1400 140 16 35 41 23 22 49 34 16,5 15,0 174 76 13,5 25,5 30 19 AH43.1639.1850 185 16 40 45 25 22 55 40 16,5 16,5 220 86 14,0 26,5 34 19 AH43.1739.1850 185 17 40 45 25 22 55 40 16,5 16,5 220 86 14,0 26,5 34 19

www.mparts.com • [email protected] • tel: +31(0)252 433733 21 Crank handle hexagonal hole rev. handle AF30 (AH45) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a hexagonal through-hole; • this crank handle has a rotating handle (AF30); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH45.0639.0650 65 6 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH45.0839.0650 65 8 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH45.1039.0800 80 10 26 30 20 18 33 19 13,0 9,0 106 56 11,0 22,0 24 9 AH45.1239.0800 80 12 26 30 20 18 33 19 13,0 9,0 106 56 11,0 22,0 24 9 AH45.1239.1100 110 12 29 33 21 18 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH45.1459.1100 110 14 29 33 21 18 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH45.1459.1400 140 14 35 41 23 22 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH45.1639.1400 140 16 35 41 23 22 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH45.1639.1850 185 16 40 45 25 22 55 40 16,5 16,5 220 86 14,0 26,5 34 19 AH45.1739.1850 185 17 40 45 25 22 55 40 16,5 16,5 220 86 14,0 26,5 34 19

22 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle hexagonal hole rev. handle AF32 (AH47) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a hexagonal through-hole; • this crank handle has a rotating handle (AF32); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH47.0639.0650 65 6 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH47.0839.0650 65 8 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH47.1039.0800 80 10 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH47.1239.0800 80 12 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH47.1239.1100 110 12 29 33 21 18 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH47.1479.1100 110 14 29 33 21 18 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH47.1479.1400 140 14 35 41 23 22 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH47.1639.1400 140 16 35 41 23 22 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH47.1639.1850 185 16 40 45 25 22 55 40 16,5 16,5 220 86 14,0 26,5 34 19 AH47.1739.1850 185 17 40 45 25 22 55 40 16,5 16,5 220 86 14,0 26,5 34 19

www.mparts.com • [email protected] • tel: +31(0)252 433733 23 Crank handle square hole revolv. handle AF23 (AH49) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main Insert: black-oxide treated insert with square through-hole (H10 tolerance); • side Insert: brass right through threaded bush.

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a square through-hole; • this crank handle has a rotating handle (AF23); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH49.0639.0650 65 6 22 27 20 14 30 17 13 8,0 88 56 9,5 18,0 20 10 AH49.0839.0650 65 8 22 27 20 14 30 17 13 8,0 88 56 9,5 18,0 20 10 AH49.1039.0800 80 10 26 30 20 18 33 19 13 9,0 106 56 11,0 21,5 24 9 AH49.1239.1100 110 12 29 33 21 18 39 22 14 11,0 138 66 12,0 22,0 28 11 AH49.1439.1400 140 14 35 41 23 22 49 34 16 15,0 174 76 13,5 25,5 30 19 AH49.1739.1850 185 17 40 45 25 28 55 40 16,5 16,5 220 86 14,0 26,5 34 21

24 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle square hole revolv. handle AF30 (AH50) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main insert: black-oxide treated insert with square through-hole(H10 tolerance); • side insert: brass right through threaded bush.

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a square; • this crank handle has a rotating through-hole handle (AF30); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH50.0639.0650 65 6 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH50.0839.0650 65 8 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH50.1039.0800 80 10 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH50.1239.1100 110 12 29 33 21 18 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH50.1439.1400 140 14 35 41 23 22 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH50.1739.1850 185 17 40 45 25 28 55 40 16,5 16,5 220 86 14,0 26,5 34 21

www.mparts.com • [email protected] • tel: +31(0)252 433733 25 Crank handle square hole revolv. handle AF32 (AH51) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a square through-hole; • this crank handle has a rotating handle (AF32); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 l l1

AH51.0639.0651 65 6 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH51.0839.0651 65 8 22 27 20 14 30 17 13,0 8,0 88 56 9,5 18,0 20 10 AH51.1039.0800 80 10 26 30 20 18 33 19 13,0 9,0 106 56 11,0 21,5 24 9 AH51.1239.1100 110 12 29 33 21 18 39 22 14,0 11,0 138 66 12,0 22,0 28 11 AH51.1439.1400 140 14 35 41 23 22 49 34 16,0 15,0 174 76 13,5 25,5 30 19 AH51.1739.1851 185 17 40 45 25 28 55 40 16,5 16,5 220 86 14,0 26,5 34 21

26 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle hexag revol. folding handle AF34 (AH53) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main Insert: black-oxide treated insert with hexagonal through-hole (H10 tolerance); • side Insert: brass right through threaded bush.

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a hexagonal through-hole; • this crank handle has a rotating, folding handle (AF34); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L D d D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 L9 l l1

AH53.0639.0650 65 22 6 27 20 14 30 17 13,0 8,0 88 54 9,5 18,0 54,0 20 10 AH53.0839.0650 65 22 8 27 20 14 30 17 13,0 8,0 88 54 9,5 18,0 54,0 20 10 AH53.1039.0800 80 26 10 30 20 18 33 19 13,0 9,0 106 54 11,0 21,5 57,0 24 9 AH53.1239.0800 80 26 12 30 20 18 33 19 13,0 9,0 106 54 11,0 21,5 57,0 24 9 AH53.1239.0110 110 29 12 33 25 18 39 25 14,0 11,0 138 75 12,0 22,0 67,5 28 11 AH53.1439.0110 110 29 14 33 25 18 39 25 14,0 11,0 138 75 12,0 22,0 67,5 28 11 AH53.1439.0140 140 35 14 41 26 22 49 33 16,0 15,0 174 89 13,5 25,5 82,0 30 19 AH53.1639.0140 140 35 16 41 26 22 49 33 16,0 15,0 174 89 13,5 25,5 82,0 30 19 AH53.1639.0185 185 40 16 45 26 28 55 40 16,5 16,5 220 97 14,0 25,5 88,0 34 21 AH53.1739.0185 185 40 17 45 26 28 55 40 16,5 16,5 220 97 14,0 25,5 88,0 34 21

www.mparts.com • [email protected] • tel: +31(0)252 433733 27 Crank handle square hole folding handle AF34 (AH55) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main Insert: black-oxide treated insert with square through-hople (H10 tolerance); • side Insert: brass right through threaded bush.

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a square through-hole; • this crank handle has a rotating, folding handle (AF34); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L D d D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 L9 l l1

AH55.0839.0650 65 22 8 27 20 14 30 17 13,0 8,0 88 54 9,5 18,0 54,0 20 10 AH55.1039.0800 80 26 10 30 20 18 33 19 13,0 9,0 106 54 11,0 21,5 57,0 24 9 AH55.1239.0110 110 29 12 33 25 18 39 25 14,0 11,0 138 75 12,0 22,0 67,5 28 11 AH55.1439.0140 140 35 14 41 26 22 49 33 16,0 15,0 174 89 13,5 25,5 82,0 30 19 AH55.1739.0185 185 40 17 45 26 28 55 40 16,5 16,5 220 97 14,0 26,5 88,0 34 21

28 www.mparts.com • [email protected] • tel: +31(0)252 433733 Crank handle smooth revolv. fold. handle AF34 (AH35) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main insert: zinc plated steel insert with smooth through-hole (H10 tolerance); • side insert grip: brass right through threaded bush.

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • d2 in the table is the maximum size of the bore; • this crank handle has a rotating, folding handle (AF34); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 d2 L1 L2 L3 L4 L5 L6 L7 L8 L9 l l1

AH35.0539.0650 65 5 22 27 20 14 12 30 17 13,0 8,0 88 54 9,5 18,0 54,0 20 10 AH35.1039.0650 65 10 22 27 20 14 12 30 17 13,0 8,0 88 54 9,5 18,0 54,0 20 10 AH35.1239.0650 65 12 22 27 20 14 12 30 17 13,0 8,0 88 54 9,5 18,0 54,0 20 10 AH35.0539.0800 80 5 26 30 20 18 14 33 19 13,0 9,0 106 54 11,0 21,5 57,0 24 9 AH35.1039.0800 80 10 26 30 20 18 14 33 19 13,0 9,0 106 54 11,0 21,5 57,0 24 9 AH35.1239.0800 80 12 26 30 20 18 14 33 19 13,0 9,0 106 54 11,0 21,5 57,0 24 9 AH35.0539.1100 110 8 29 33 25 18 14 39 25 14,0 11,0 138 75 12,0 22,0 67,5 28 11 AH35.1039.1100 110 10 29 33 25 18 14 39 25 14,0 11,0 138 75 12,0 22,0 67,5 28 11 AH35.1239.1100 110 12 29 33 25 18 14 39 25 14,0 11,0 138 75 12,0 22,0 67,5 28 11 AH35.0839.1400 140 8 35 41 26 22 20 49 33 16,0 15,0 174 89 13,5 25,5 82,0 30 19 AH35.1239.1400 140 12 35 41 26 22 20 49 33 16,0 15,0 174 89 13,5 25,5 82,0 30 19 AH35.1439.1400 140 14 35 41 26 22 20 49 33 16,0 15,0 174 89 13,5 25,5 82,0 30 19 AH35.1639.1400 140 16 35 41 26 22 20 49 33 16,0 15,0 174 89 13,5 25,5 82,0 30 19 AH35.0539.1800 185 8 40 45 26 28 22 55 40 16,5 16,5 220 97 14,0 26,5 88,0 34 21 AH35.1239.1850 185 12 40 45 26 28 22 55 40 16,5 16,5 220 97 14,0 26,5 88,0 34 21

www.mparts.com • [email protected] • tel: +31(0)252 433733 29 Crank handle threaded insert rev. fold. AF34 (AH40) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main insert: brass blind threaded bush (6H tolerance); zinc plated steel blind threaded bush (bij d = M16); • side insert: brass right through threaded bush.

Characteristics: • surface: satin; • colour: black; • central cap: grey polyamide (RAL 7035); • alternative cap colour: orange (RAL 2004); blue (RAL 5015); yellow (RAL 1021); red (RAL 3000); green (RAL 6024); black (RAL 9011); contact us for more information; • this crank handle has a rotating, folding handle (AF34); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 d1 L1 L2 L3 L4 L5 L6 L7 L8 L9 l l1

AH40.0837.0650 65 M8 22 27 20 14 30 17 13,0 8,0 88 54 9,5 18,0 54,0 15 10 AH40.1037.0650 65 M10 22 27 20 14 30 17 13,0 8,0 88 54 9,5 18,0 54,0 15 10 AH40.1237.0650 65 M12 22 27 20 14 30 17 13,0 8,0 88 54 9,5 18,0 54,0 18 10 AH40.0837.0800 80 M8 26 30 20 18 33 19 13,0 9,0 106 54 11,0 21,5 57,0 18 9 AH40.1037.0800 80 M10 26 30 20 18 33 19 13,0 9,0 106 54 11,0 21,5 57,0 18 9 AH40.1237.0800 80 M12 26 30 20 18 33 19 13,0 9,0 106 54 11,0 21,5 57,0 18 9 AH40.1037.1100 110 M10 29 33 25 18 39 25 14,0 11,0 138 75 12,0 22,0 67,5 16 11 AH40.1237.1100 110 M12 29 33 25 18 39 25 14,0 11,0 138 75 12,0 22,0 67,5 18 11 AH40.1437.1100 110 M14 29 33 25 18 39 25 14,0 11,0 138 75 12,0 22,0 67,5 18 11 AH40.1237.1400 140 M12 35 41 26 22 49 33 16,0 15,0 174 89 13,5 25,5 82,0 19 19 AH40.1437.1400 140 M14 35 41 26 22 49 33 16,0 15,0 174 89 13,5 25,5 82,0 18 19 AH40.1637.1400 140 M16 35 41 26 22 49 33 16,0 15,0 174 89 13,5 25,5 82,0 18 19 AH40.1237.1800 185 M12 40 45 26 28 55 40 16,5 16,5 220 97 14,0 26,5 88,0 17 21 AH40.1437.1800 185 M14 40 45 26 28 55 40 16,5 16,5 220 97 14,0 26,5 88,0 19 21 AH40.1937.1800 185 M16 40 45 26 28 55 40 16,5 16,5 220 97 14,0 26,5 88,0 18 21

30 www.mparts.com • [email protected] • tel: +31(0)252 433733 Ind. crank handle thread, revolv. handle AF23 (AH23) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main insert: zinc plated steel blind threaded bush; • side insert: brass right through threaded bush; • spring: zinc plated steel; • fixing screw: black-oxyde treated screw with head for fitting screwdriver.

Characteristics: • surface: satin; • colour: black; • this crank handle has a rotating handle (AF23); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 L1 L2 L3 L4 L5 L6 L7 L8 L9 l

AH23.0839.0650 65 M8 19,0 27 20 46 29 13 10,0 86 56 10,0 17 - 18 AH23.1039.0650 65 M10 19,0 27 20 46 29 13 10,0 86 56 10,0 17 - 17 AH23.1239.0650 65 M12 19,0 27 20 46 29 13 10,0 86 56 10,0 17 - 17 AH23.1239.0800 80 M12 24,0 34 21 50 32 13 10,5 108 66 11,5 22 53 22 AH23.1439.0800 80 M14 24,0 34 21 50 32 13 10,5 108 66 11,5 22 53 23 AH23.1639.0800 80 M16 24,0 34 21 50 32 13 10,5 108 66 11,5 22 53 20 AH23.1239.1100 110 M12 24,5 34 21 50 33 13 11,0 138 66 11,5 22 54 20 AH23.1439.1100 110 M14 24,5 34 21 50 33 13 11,0 138 66 11,5 22 54 20 AH23.1639.1100 110 M16 24,5 34 21 50 33 13 11,0 138 66 11,5 22 54 20

www.mparts.com • [email protected] • tel: +31(0)252 433733 31 Ind. crank handle thread, revolv. handle AF32 (AH24) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • this crank handle has a rotating handle (AF32); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 L1 L2 L3 L4 L5 L6 L7 L8 L9 l

AH24.0839.0650 65 M8 19,0 27 20 46 29 13 9,5 86 52 9,5 17 - 18 AH24.1039.0650 65 M10 19,0 27 20 46 29 13 9,5 86 52 9,5 17 - 17 AH24.1239.0650 65 M12 19,0 27 20 46 29 13 9,5 86 52 9,5 17 - 17 AH24.1239.0800 80 M12 24,5 34 23 50 32 13 10,5 108 62 11,5 22 53 22 AH24.1439.0800 80 M14 24,5 34 23 50 32 13 10,5 108 62 11,5 22 53 23 AH24.1639.0800 80 M16 24,5 34 23 50 32 13 10,5 108 62 11,5 22 53 20 AH24.1239.1100 110 M12 24,5 34 23 50 33 13 11,0 138 62 11,5 22 54 20 AH24.1439.1100 110 M14 24,5 34 23 50 33 13 11,0 138 62 11,5 22 54 20 AH24.1639.1100 110 M16 24,5 34 23 50 33 13 11,0 138 62 11,5 22 54 20

32 www.mparts.com • [email protected] • tel: +31(0)252 433733 Ind. crank handle thread, revolv. handle AF30 (AH25) Crank handles

Description

Characteristics: • surface: satin; • colour: black; • this crank handle has a rotating handle (AF30); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 L1 L2 L3 L4 L5 L6 L7 L8 L9 l

AH25.0839.0650 65 M8 19,0 27 20 46 29 13 10,0 86 56 10,0 17 - 18 AH25.1039.0650 65 M10 19,0 27 20 46 29 13 10,0 86 56 10,0 17 - 17 AH25.1239.0650 65 M12 19,0 27 20 46 29 13 10,0 86 56 10,0 17 - 17 AH25.1239.0800 80 M12 24,5 34 23 50 32 13 10,5 108 66 11,5 22 53 22 AH25.1439.0800 80 M14 24,5 34 23 50 32 13 10,5 108 66 11,5 22 53 23 AH25.1639.0800 80 M16 24,5 34 23 50 32 13 10,5 108 66 11,5 22 53 20 AH25.1239.1100 110 M12 24,5 34 23 50 33 13 10,5 138 66 11,5 22 54 20 AH25.1439.1100 110 M14 24,5 34 23 50 33 13 11,0 138 66 11,5 22 54 20 AH25.1639.1100 110 M16 24,5 34 23 50 33 13 11,0 138 66 11,5 22 54 20

www.mparts.com • [email protected] • tel: +31(0)252 433733 33 Ind crank handle smooth rev. fold handle AF34 (AH36) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main insert: zinc plated steel blind bored bush (H10 tolerance); • side insert: brass right through threaded bush. • spring: zinc plated steel spring; • fixing screw:black-oxyde treated screw with head for fitting screwdriver.

Characteristics: • surface: satin; • colour: black; • this crank handle has a rotating, folding handle (AF34); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 l

AH36.0539.0650 65 5 19,0 27 20 46 29 13 10,0 86 54 9,0 17 - - 22 AH36.0539.0800 80 5 24,5 34 25 50 32 13 10,5 108 75 11,5 22 53 53 24 AH36.0539.1100 110 5 24,5 34 25 50 33 13 11,0 138 75 11,5 22 54 54 28

34 www.mparts.com • [email protected] • tel: +31(0)252 433733 Ind crank handle thread rev. fold handle AF34 (AH41) Crank handles

Description

Material: • crank handle and grip: reinforced polyamide (PA-GF), oils and greases resistant; • main insert: zinc plated steel blind threaded bush (6H tolerance); • insert handle: brass right through threaded bush; • spring: zinc plated steel spring; • fixing screw: black-oxyde treated screw with head for fitting screwdriver.

Characteristics: • surface: satin; • colour: black; • this crank handle has a rotating, folding handle (AF34); • temperature range from a minimum of -20°C to a maximum of 135°C.

Productcode L d D D1 D2 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 l

AH41.0839.0650 65 M8 19,0 27 20 46 29 13 10,0 86 54 9,0 17 - 66,5 18 AH41.1039.0650 65 M10 19,0 27 20 46 29 13 10,0 86 54 9,0 17 - 66,5 17 AH41.1239.0650 65 M12 19,0 27 20 46 29 13 10,0 86 54 9,0 17 - 66,5 17 AH41.1239.0800 80 M12 24,5 34 25 50 32 13 10,5 108 75 11,5 22 53 75,0 22 AH41.1439.0800 80 M14 24,5 34 25 50 32 13 10,5 108 75 11,5 22 53 75,0 23 AH41.1639.0800 80 M16 24,5 34 25 50 32 13 10,5 108 75 11,5 22 53 75,0 20 AH41.1239.1100 110 M12 24,5 34 25 50 33 13 11,0 138 75 11,5 22 53 75,0 20 AH41.1439.1100 110 M14 24,5 34 25 50 33 13 11,0 138 75 11,5 22 53 75,0 20 AH41.1639.1100 110 M16 24,5 34 25 50 33 13 11,0 138 75 11,5 22 53 75,0 20

www.mparts.com • [email protected] • tel: +31(0)252 433733 35 Index

C Crank handle DIN 468 goose-neck handle AF35 7 Crank handle DIN 468 rotating handle AF36 8 Crank handle DIN 469 straight, handle AF35 5 Crank handle DIN 469 straight rotating AF36 6 Crank handle hexagonal hole rev. handle AF23 21 Crank handle hexagonal hole rev. handle AF30 22 Crank handle hexagonal hole rev. handle AF32 23 Crank handle hexag revol. folding handle AF34 27 Crank handle smooth insert rev. handle AF23 13 Crank handle smooth insert rev. handle AF32 14 Crank handle smooth insert revolv handle AF30 15 Index Crank handle smooth revolv. fold. handle AF34 29 Crank handle square hole folding handle AF34 28 Crank handle square hole revolv. handle AF23 24 Crank handle square hole revolv. handle AF30 25 Crank handle square hole revolv. handle AF32 26 Crank handle SST precision casting 11 Crank handle threaded insert rev. fold. AF34 30 Crank handle threaded insert rev. handle AF23 18 Crank handle threaded insert rev. handle AF30 20 Crank handle threaded insert rev. handle AF32 19 Crank handle with rotating handle AF39 9

I Ind crank handle smooth rev. fold handle AF34 34 Ind. Crank handle, smooth revolv. handle AF32 17 Ind crank handle thread rev. fold handle AF34 35 Ind. crank handle thread, revolv. handle AF23 31 Ind. crank handle thread, revolv. handle AF30 33 Ind. crank handle thread, revolv. handle AF32 32 Index crank handle smooth revol. handle AF23 16

www.mparts.com • [email protected] • tel: +31(0)252 433733 37 More info? Call +31(0) 252 433733, mail to [email protected] or visit www.mparts.com