Lista Workbenches

Lista workbench systems, like Building your Ideal Using standard components, your all Lista systems, feature a clean, Workbench workbench system can be com- aesthetically pleasing and Lista’s wide array of accessory pletely customized, without the

® extremely practical design. options, above and below the custom cost, to suit your current Rugged stationary and adjustable Instrument riser shelves can be The FlexWorks Accessory System riser shelves provide above-work- equipped with electrical kits for easy provides for a wide variety of These are fully integrated mod- worksurface, allows for an almost and changing needs. surface storage for items that require access to power. storage and work accessories above ular systems for storage and work- infinite number of configurations. easy, ready access. the worksurface. space. They are customizable to the last detail, but come without a custom cost. Workbenches can be configured in a variety of heights and lengths. Benches can be ordered at ergonomically correct standard work height, or at desk or counter heights. This means that Our variety of workbench tops, stored tools and parts are always from hard maple to plastic laminate to galvanized steel, are all easy to within easy reach. maintain, rugged and durable. Lista offers workbench compo- nents for industrial, assembly and Our variety of workbench legs and technical/laboratory settings, bases, from industrial to technical to allowing the exact customization Height-Right® height-adjustable, are needed for each application. designed to meet your specific func- Our workbenches can be tional and aesthetic requirements. teamed with both Narrow Width

(16 7⁄8" wide) and MP Width

(22 3 ⁄16" wide) storage cabinets for use as pedestals. This provides complete organization of tools, components or instrumentation, right at the point of use. Our Narrow Width (left) and MP Partial- or full-height doors can be The ability to add casters to legs and Width (right) cabinets give you a added to cabinet housings to provide cabinets means that any Lista work- choice of pedestal options for your bulk shelf storage with full security. bench can become a workstation on workbench system. wheels.

62 63 Lista Workbenches

Lista workbench systems, like Building your Ideal Using standard components, your all Lista systems, feature a clean, Workbench workbench system can be com- aesthetically pleasing and Lista’s wide array of accessory pletely customized, without the

® extremely practical design. options, above and below the custom cost, to suit your current Rugged stationary and adjustable Instrument riser shelves can be The FlexWorks Accessory System riser shelves provide above-work- equipped with electrical kits for easy provides for a wide variety of These are fully integrated mod- worksurface, allows for an almost and changing needs. surface storage for items that require access to power. storage and work accessories above ular systems for storage and work- infinite number of configurations. easy, ready access. the worksurface. space. They are customizable to the last detail, but come without a custom cost. Workbenches can be configured in a variety of heights and lengths. Benches can be ordered at ergonomically correct standard work height, or at desk or counter heights. This means that Our variety of workbench tops, stored tools and parts are always from hard maple to plastic laminate to galvanized steel, are all easy to within easy reach. maintain, rugged and durable. Lista offers workbench compo- nents for industrial, assembly and Our variety of workbench legs and technical/laboratory settings, bases, from industrial to technical to allowing the exact customization Height-Right® height-adjustable, are needed for each application. designed to meet your specific func- Our workbenches can be tional and aesthetic requirements. teamed with both Narrow Width

(16 7⁄8" wide) and MP Width

(22 3 ⁄16" wide) storage cabinets for use as pedestals. This provides complete organization of tools, components or instrumentation, right at the point of use. Our Narrow Width (left) and MP Partial- or full-height doors can be The ability to add casters to legs and Width (right) cabinets give you a added to cabinet housings to provide cabinets means that any Lista work- choice of pedestal options for your bulk shelf storage with full security. bench can become a workstation on workbench system. wheels.

62 63 Lista Industrial Workbench Features

Rugged. Durable. Built to handle the harshest work environments — Lista’s industrial workbenches feature flexible standard compo- nents and can be cost-effectively custom designed and built to meet the specific needs of your application.

Feature: Wide choice of benchtop accessories Create task-specific configurations. Benefit: Greater productivity and efficiency

Feature: Variety of worksurfaces All tops come in a variety of lengths and are durable and long-lasting. Benefit: Surface always appropriate to application

Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics

Feature: Customizable drawer compartments A wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and styles Different widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets. Benefit: Customized to your needs

Feature: Heavy-duty welded leg One-piece leg with bottom hole for optional leveling glides. Benefit: Provides support for heavy-duty applications

Feature: Mobility All cabinets and legs are easily updated for mobile uses. Benefit: Work areas can easily be reconfigured, components can be moved to and from the work site

64 65 Lista Industrial Workbench Features

Rugged. Durable. Built to handle the harshest work environments — Lista’s industrial workbenches feature flexible standard compo- nents and can be cost-effectively custom designed and built to meet the specific needs of your application.

Feature: Wide choice of benchtop accessories Create task-specific configurations. Benefit: Greater productivity and efficiency

Feature: Variety of worksurfaces All tops come in a variety of lengths and are durable and long-lasting. Benefit: Surface always appropriate to application

Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics

Feature: Customizable drawer compartments A wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and styles Different widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets. Benefit: Customized to your needs

Feature: Heavy-duty welded leg One-piece leg with bottom hole for optional leveling glides. Benefit: Provides support for heavy-duty applications

Feature: Mobility All cabinets and legs are easily updated for mobile uses. Benefit: Work areas can easily be reconfigured, components can be moved to and from the work site

64 65 Lista Industrial Workbenches Make Any Workspace Work

Lista’s rugged industrial workbench systems and the large variety of accessories can be configured to suit almost any application or working environment. Heavy-duty Lista industrial work- benches in combination with Lista stacked cabinets help to create an organized, efficient workspace that stands up to the challenges of this marine emergency response company.

Four sets of four custom-designed workbenches make maximum use of the available space in this machine tool room at the Mercedes-Benz Training Center.

Cliflex Bellows, a manufacturer of industrial control equipment, relies on Lista workbenches for heavy duty storage below the bench, as well as durable worksurfaces providing decades of use. In this automotive engineering shop used by the PacWest Racing Group, Lista workbenches and overhead cabinets help to keep the team of Workbenches at Sun Chemical’s labo- racing engineers operating at peak This corporate aircraft operator ratories are used for the formulation efficiency. wanted to upgrade its maintenance and matching of printer’s inks. The facility to match the quality of its benches provide an aesthetically aircraft. They use several mobile pleasing work area with durable, “benches on wheels” in its hangar easy-to-clean surfaces and organized and support shop, including this storage. mobile inspection station.

66 67 Lista Industrial Workbenches Make Any Workspace Work

Lista’s rugged industrial workbench systems and the large variety of accessories can be configured to suit almost any application or working environment. Heavy-duty Lista industrial work- benches in combination with Lista stacked cabinets help to create an organized, efficient workspace that stands up to the challenges of this marine emergency response company.

Four sets of four custom-designed workbenches make maximum use of the available space in this machine tool room at the Mercedes-Benz Training Center.

Cliflex Bellows, a manufacturer of industrial control equipment, relies on Lista workbenches for heavy duty storage below the bench, as well as durable worksurfaces providing decades of use. In this automotive engineering shop used by the PacWest Racing Group, Lista workbenches and overhead cabinets help to keep the team of Workbenches at Sun Chemical’s labo- racing engineers operating at peak This corporate aircraft operator ratories are used for the formulation efficiency. wanted to upgrade its maintenance and matching of printer’s inks. The facility to match the quality of its benches provide an aesthetically aircraft. They use several mobile pleasing work area with durable, “benches on wheels” in its hangar easy-to-clean surfaces and organized and support shop, including this storage. mobile inspection station.

66 67 Lista Technical Workbench Features

Featuring a sleek, aesthetically Our modular approach is the key to pleasing design, the real beauty of our technical benches’ versatility, Lista’s technical workbenches is with flexible standard components their ability to perfectly suit the and accessory options both above widest variety of applications. and below the worksurface.

Feature: Wide choice of benchtop accessories Create task-specific configurations. Benefit: Greater productivity and efficiency

Feature: Built-in electrical power supply Multiple outlets conveniently located on instrument riser. Benefit: Easy access to electricity

VAILA Feature: Variety of worksurfaces, including ESD A B D L S E E All tops come in a variety of lengths and are durable and long-lasting. Benefit: Surface always appropriate to application, ESD surface protects sensitive components

Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics

Feature: ESD drawer accessories, grounding wire Static dissipative paint and plastic boxes protect sensitive drawer contents. Benefit: Safe storage and use of electronic items

Feature: Customizable drawer compartments A wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and styles Different widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets. Benefit: Customized to your needs

Feature: Removable leg panel Allows for two-tone colors, hides stringer and bottom shelf hardware, provides access to electric cables. Benefit: Enhanced aesthetics, easy maintenance

Feature: Easy-access leveling adjustments Removable end caps provide clean look and quick access to leveling adjustments. Benefit: Worksurface is always level

Feature: Mobility All cabinets and legs are easily updated for mobile uses. Benefit: Work areas can easily be reconfigured, components can be moved to and from the work site

68 69 Lista Technical Workbench Features

Featuring a sleek, aesthetically Our modular approach is the key to pleasing design, the real beauty of our technical benches’ versatility, Lista’s technical workbenches is with flexible standard components their ability to perfectly suit the and accessory options both above widest variety of applications. and below the worksurface.

Feature: Wide choice of benchtop accessories Create task-specific configurations. Benefit: Greater productivity and efficiency

Feature: Built-in electrical power supply Multiple outlets conveniently located on instrument riser. Benefit: Easy access to electricity

VAILA Feature: Variety of worksurfaces, including ESD A B D L S E E All tops come in a variety of lengths and are durable and long-lasting. Benefit: Surface always appropriate to application, ESD surface protects sensitive components

Feature: Ergonomic handles When drawers are closed, handles are flush with housing so nothing protrudes. Drawer handles are located at top of drawer. Benefit: Improves safety, appearance and ergonomics

Feature: ESD drawer accessories, grounding wire Static dissipative paint and plastic boxes protect sensitive drawer contents. Benefit: Safe storage and use of electronic items

Feature: Customizable drawer compartments A wide variety of drawer accessories for maximum partitioning flexibility. Benefit: Better organization, faster retrieval

Feature: Choice of pedestal sizes and styles Different widths, leg heights, cabinets or legs, drawer cabinets or shelf/door cabinets. Benefit: Customized to your needs

Feature: Removable leg panel Allows for two-tone colors, hides stringer and bottom shelf hardware, provides access to electric cables. Benefit: Enhanced aesthetics, easy maintenance

Feature: Easy-access leveling adjustments Removable end caps provide clean look and quick access to leveling adjustments. Benefit: Worksurface is always level

Feature: Mobility All cabinets and legs are easily updated for mobile uses. Benefit: Work areas can easily be reconfigured, components can be moved to and from the work site

68 69 Lista Technical Workbenches Make Any Workspace Work

No matter what you’re working At Columbia University’s Medical on, Lista’s technical workbench Research Laboratories, Lista work- bench systems offer maximum systems have the variety, dura- Cummins Engine purchased 200 drawer storage and organization. bility and flexibility to meet Lista workbenches featuring the They allow researchers to keep all your needs. FlexWorks® Accessory System, tools, supplies and testing equipment largely because they could customize from cluttering the worksurface. The Telesis Marking Systems utilizes Lista each workbench to suit the needs of clean, high tech look of the systems is workbenches throughout their assem- each individual technician. The Lista a perfect complement to the labora- bly area, with specific benches system also provides Cummins with tory’s sleek interior design. designed for particular tasks. Lista’s a variety of storage solutions below cabinets with subdividable drawers the worksurface. are ideal for storing small items and tools such as fasteners and assembly parts.

Productivity has improved at Hypertherm, a manufacturer of plasma cutting equipment, with the assistance of Lista workbenches equipped with the FlexWorks Accessory System. Hand, electric and pneumatic tools are stored directly at the workstations, and FlexWorks components are easily adjusted With Lista workbenches and overhead cabinets, Wishard whenever necessary to suit specific Memorial Hospital was able to consolidate their Biomedical tasks. Engineering Department into a very organized and produc- tive workspace, using dramatically less square footage than prior equipment. Lista’s modular cabinet drawers also simplify the inventory of supplies and components. The Sony Electronics facility needed a more flexible work- bench system that would be strong enough for working with and storing heavy electronic equipment. Lista’s workbenches, featuring the FlexWorks® Accessory System, have proven an ideal solution, serving a variety of functions and offering the necessary weight-bearing capacity. Sony also chose Lista mobile cabinets, which are used for housing a range of parts and tools.

70 71 Lista Technical Workbenches Make Any Workspace Work

No matter what you’re working At Columbia University’s Medical on, Lista’s technical workbench Research Laboratories, Lista work- bench systems offer maximum systems have the variety, dura- Cummins Engine purchased 200 drawer storage and organization. bility and flexibility to meet Lista workbenches featuring the They allow researchers to keep all your needs. FlexWorks® Accessory System, tools, supplies and testing equipment largely because they could customize from cluttering the worksurface. The Telesis Marking Systems utilizes Lista each workbench to suit the needs of clean, high tech look of the systems is workbenches throughout their assem- each individual technician. The Lista a perfect complement to the labora- bly area, with specific benches system also provides Cummins with tory’s sleek interior design. designed for particular tasks. Lista’s a variety of storage solutions below cabinets with subdividable drawers the worksurface. are ideal for storing small items and tools such as fasteners and assembly parts.

Productivity has improved at Hypertherm, a manufacturer of plasma cutting equipment, with the assistance of Lista workbenches equipped with the FlexWorks Accessory System. Hand, electric and pneumatic tools are stored directly at the workstations, and FlexWorks components are easily adjusted With Lista workbenches and overhead cabinets, Wishard whenever necessary to suit specific Memorial Hospital was able to consolidate their Biomedical tasks. Engineering Department into a very organized and produc- tive workspace, using dramatically less square footage than prior equipment. Lista’s modular cabinet drawers also simplify the inventory of supplies and components. The Sony Electronics facility needed a more flexible work- bench system that would be strong enough for working with and storing heavy electronic equipment. Lista’s workbenches, featuring the FlexWorks® Accessory System, have proven an ideal solution, serving a variety of functions and offering the necessary weight-bearing capacity. Sony also chose Lista mobile cabinets, which are used for housing a range of parts and tools.

70 71 How to Order Custom Workbenches from Lista Workbench Tops

These are the basic steps 3 Lista workbench tops are all required for ordering custom work- easy to maintain, rugged, and benches from Lista. 3 durable. To order an Easy-Order combi- ■ Lista Tops Tops come in 48", 60", 72", 84" ■ Maple Tops Static Dissipative Plastic nation (workbench with preconfig- 3 This warp-free and oil resistant 1 3⁄4" thick and 96" lengths, and are 30" or ■ Satin finish 1 3⁄4" thick hard maple. Available Laminate Tops top has a wood core and a 3⁄8" thick sanded ured accessories) see pages 80-81 ■ in standard square edge (shown above) or Woodcore center with plastic laminated top 36" deep. Other sizes are available pressed wood finish, top and bottom. ■ radius/bullnose front edge. To order a and sides. 1 9⁄16" thick. Grounding bolt and a for industrial workbenches and special order, and certain tops are PART NO. SIZE radius/bullnose edge, add “-BN” 12' grounding cord with a 1 megohm resistor pages 82-83 for technical 3 LTOP-48 48" long x 30" deep to the end of the part number. are included. Standard color is white but other available with a radius/bullnose workbenches. LTOP-60 60" long x 30" deep colors are available on request. Available in 1 PART NO. SIZE front edge. LTOP-72 72" long x 30" deep standard square edge or radius/bullnose front LTOP-84 84" long x 30" deep MTOP-48 48" long x 30" deep LTOP-96 96" long x 30" deep MTOP-60 60" long x 30" deep edge (shown above). To order a radius/ LTOP-4836 48" long x 36" deep MTOP-72 72" long x 30" deep bullnose edge, add “-BN” to the end LTOP-6036 60" long x 36" deep MTOP-84 84" long x 30" deep of the part number. LTOP-7236 72" long x 36" deep MTOP-96 96" long x 30" deep LTOP-8436 84" long x 36" deep MTOP-4836 48" long x 36" deep Specifications 2 4 LTOP-9636 96" long x 36" deep MTOP-6036 60" long x 36" deep Surface resistivity: 108-109 ohms, 100 volts MTOP-7236 72" long x 36" deep Resistance to ground: 10 6-10 7 typical, 1 x 10 8-1 x MTOP-8436 84" long x 36" deep 9 MTOP-9636 96" long x 36" deep 10 certified. Static Decay Rate: 5,000 to 0 volts, Fed test method 101C, Method 4048; 0.01 sec. typical; less than 0.05 sec. certified. Certification: EOS/ESD Association standard number 2 Galvanized Steel Over Wood s4.1-1990 Work Surfaces Resistive 2 Tops Characterization. Same construction as the standard Lista Top PART NO. SIZE with an additional heavy gauge, galvanized Plastic Laminate Tops SDTOP-48 48" long x 30" deep steel cover that is fitted over top and sides of Woodcore center with plastic laminated top SDTOP-60 60" long x 30" deep wood core. Top is 1 3⁄4" thick. and sides. 1 9⁄16" thick. Dove gray is standard SDTOP-72 72" long x 30" deep but other colors are available on request. Avail- SDTOP-84 84" long x 30" deep PART NO. SIZE able in standard square edge or radius/bullnose SDTOP-96 96" long x 30" deep Sample Workbench Order LSTOP-48 48" long x 30" deep SDTOP-4836 48" long x 36" deep DESCRIPTION front edge (shown above). T NO. 1 LSTOP-60 60" long x 30" deep To order a SDTOP-6036 60" long x 36" deep ANTITY PAR QU 2 LSTOP-72 72" long x 30" deep radius/bullnose edge, add “-BN” SDTOP-7236 72" long x 36" deep 1 MTOP-60 maple workbench top 1 Select Workbench Top 3 Select Above-Worksurface LSTOP-84 84" long x 30" deep to the end of the part number. SDTOP-8436 84" long x 36" deep 2 Select the top that best suits your needs from Accessories LSTOP-96 96" long x 30" deep SDTOP-9636 96" long x 36" deep 1 NTL33.5x28.5 technical leg PART NO. SIZE 2 the choices on page 73. Choose the top Select the backstop and endstops (page 78), LSTOP-4836 48" long x 36" deep LSTOP-6036 60" long x 36" deep PTOP-48 48" long x 30" deep 1 ST-60NTLMP stringer shelves (stationary, adjustable or instrument 4 length, depth and style that you prefer. LSTOP-7236 72" long x 36" deep PTOP-60 60" long x 30" deep 1 MP600-3A-I Easy-Order cabinet riser — see pages 78-79) and/or Flex- LSTOP-8436 84" long x 36" deep PTOP-72 72" long x 30" deep Housing: BB bright blue paint 4 Works ® components (pages 85-89) that LSTOP-9636 96" long x 36" deep PTOP-84 84" long x 30" deep 3 best suit your needs. PTOP-96 96" long x 30" deep Drawers: BB bright blue paint 2 Select Below-Worksurface PTOP-4836 48" long x 36" deep 3 Accessories PTOP-6036 60" long x 36" deep 1 TBS60 backstop 3 Select either a 2 leg, a 1 leg with cabinet or a PTOP-7236 72" long x 36" deep Stainless Steel Over Wood Tops 1 IRSS20 instru. riser support 2 cabinet configuration. Legs, stringers, bottom 4 Select Colors PTOP-8436 84" long x 36" deep Top is constructed of durable, heavy gauge 3 PTOP-9636 96" long x 36" deep stainless steel, fitted over top and sides of 1 IRSS20/15 instru. riser support shelves and privacy panels are shown on pages Select a color from the color chart on the back 3 74-75. Hanging cabinets are shown on page cover. Cabinet housing and drawer fronts can wood core. Top is 1 3⁄4" thick. 1 MS6012 instru. riser shelf 81. If you have selected a cabinet(s) pedestal, be different colors, but drawer interiors are Phenolic Tops 4 PART NO. SIZE 1 TBS60 shelf backstop please see pages 42-43 for cabinet ordering always gray. Features a high-pressure laminate designed for laboratory worksurfaces. Resistant to chemi- LSSTOP-4830 48" long x 30" deep BB bright blue paint instructions, or choose an Easy-Order cabinet LSSTOP-6030 60" long x 30" deep from the appropriate pages. cals, stains or discoloration. Top is 1" thick LSSTOP-7230 72" long x 30" deep phenolic resin, available in black. LSSTOP-8430 84" long x 30" deep LSSTOP-9630 96" long x 30" deep PART NO. SIZE LSSTOP-4836 48" long x 36" deep RTOP-48 48" long x 30" deep LSSTOP-6036 60" long x 36" deep RTOP-60 60" long x 30" deep LSSTOP-7236 72" long x 36" deep RTOP-72 72" long x 30" deep LSSTOP-8436 84" long x 36" deep RTOP-84 84" long x 30" deep LSSTOP-9636 96" long x 36" deep 72 RTOP-96 96" long x 30" deep 73 How to Order Custom Workbenches from Lista Workbench Tops

These are the basic steps 3 Lista workbench tops are all required for ordering custom work- easy to maintain, rugged, and benches from Lista. 3 durable. To order an Easy-Order combi- ■ Lista Tops Tops come in 48", 60", 72", 84" ■ Maple Tops Static Dissipative Plastic nation (workbench with preconfig- 3 This warp-free and oil resistant 1 3⁄4" thick and 96" lengths, and are 30" or ■ Satin finish 1 3⁄4" thick hard maple. Available Laminate Tops top has a wood core and a 3⁄8" thick sanded ured accessories) see pages 80-81 ■ in standard square edge (shown above) or Woodcore center with plastic laminated top 36" deep. Other sizes are available pressed wood finish, top and bottom. ■ radius/bullnose front edge. To order a and sides. 1 9⁄16" thick. Grounding bolt and a for industrial workbenches and special order, and certain tops are PART NO. SIZE radius/bullnose edge, add “-BN” 12' grounding cord with a 1 megohm resistor pages 82-83 for technical 3 LTOP-48 48" long x 30" deep to the end of the part number. are included. Standard color is white but other available with a radius/bullnose workbenches. LTOP-60 60" long x 30" deep colors are available on request. Available in 1 PART NO. SIZE front edge. LTOP-72 72" long x 30" deep standard square edge or radius/bullnose front LTOP-84 84" long x 30" deep MTOP-48 48" long x 30" deep LTOP-96 96" long x 30" deep MTOP-60 60" long x 30" deep edge (shown above). To order a radius/ LTOP-4836 48" long x 36" deep MTOP-72 72" long x 30" deep bullnose edge, add “-BN” to the end LTOP-6036 60" long x 36" deep MTOP-84 84" long x 30" deep of the part number. LTOP-7236 72" long x 36" deep MTOP-96 96" long x 30" deep LTOP-8436 84" long x 36" deep MTOP-4836 48" long x 36" deep Specifications 2 4 LTOP-9636 96" long x 36" deep MTOP-6036 60" long x 36" deep Surface resistivity: 108-109 ohms, 100 volts MTOP-7236 72" long x 36" deep Resistance to ground: 10 6-10 7 typical, 1 x 10 8-1 x MTOP-8436 84" long x 36" deep 9 MTOP-9636 96" long x 36" deep 10 certified. Static Decay Rate: 5,000 to 0 volts, Fed test method 101C, Method 4048; 0.01 sec. typical; less than 0.05 sec. certified. Certification: EOS/ESD Association standard number 2 Galvanized Steel Over Wood s4.1-1990 Work Surfaces Resistive 2 Tops Characterization. Same construction as the standard Lista Top PART NO. SIZE with an additional heavy gauge, galvanized Plastic Laminate Tops SDTOP-48 48" long x 30" deep steel cover that is fitted over top and sides of Woodcore center with plastic laminated top SDTOP-60 60" long x 30" deep wood core. Top is 1 3⁄4" thick. and sides. 1 9⁄16" thick. Dove gray is standard SDTOP-72 72" long x 30" deep but other colors are available on request. Avail- SDTOP-84 84" long x 30" deep PART NO. SIZE able in standard square edge or radius/bullnose SDTOP-96 96" long x 30" deep Sample Workbench Order LSTOP-48 48" long x 30" deep SDTOP-4836 48" long x 36" deep DESCRIPTION front edge (shown above). T NO. 1 LSTOP-60 60" long x 30" deep To order a SDTOP-6036 60" long x 36" deep ANTITY PAR QU 2 LSTOP-72 72" long x 30" deep radius/bullnose edge, add “-BN” SDTOP-7236 72" long x 36" deep 1 MTOP-60 maple workbench top 1 Select Workbench Top 3 Select Above-Worksurface LSTOP-84 84" long x 30" deep to the end of the part number. SDTOP-8436 84" long x 36" deep 2 Select the top that best suits your needs from Accessories LSTOP-96 96" long x 30" deep SDTOP-9636 96" long x 36" deep 1 NTL33.5x28.5 technical leg PART NO. SIZE 2 the choices on page 73. Choose the top Select the backstop and endstops (page 78), LSTOP-4836 48" long x 36" deep LSTOP-6036 60" long x 36" deep PTOP-48 48" long x 30" deep 1 ST-60NTLMP stringer shelves (stationary, adjustable or instrument 4 length, depth and style that you prefer. LSTOP-7236 72" long x 36" deep PTOP-60 60" long x 30" deep 1 MP600-3A-I Easy-Order cabinet riser — see pages 78-79) and/or Flex- LSTOP-8436 84" long x 36" deep PTOP-72 72" long x 30" deep Housing: BB bright blue paint 4 Works ® components (pages 85-89) that LSTOP-9636 96" long x 36" deep PTOP-84 84" long x 30" deep 3 best suit your needs. PTOP-96 96" long x 30" deep Drawers: BB bright blue paint 2 Select Below-Worksurface PTOP-4836 48" long x 36" deep 3 Accessories PTOP-6036 60" long x 36" deep 1 TBS60 backstop 3 Select either a 2 leg, a 1 leg with cabinet or a PTOP-7236 72" long x 36" deep Stainless Steel Over Wood Tops 1 IRSS20 instru. riser support 2 cabinet configuration. Legs, stringers, bottom 4 Select Colors PTOP-8436 84" long x 36" deep Top is constructed of durable, heavy gauge 3 PTOP-9636 96" long x 36" deep stainless steel, fitted over top and sides of 1 IRSS20/15 instru. riser support shelves and privacy panels are shown on pages Select a color from the color chart on the back 3 74-75. Hanging cabinets are shown on page cover. Cabinet housing and drawer fronts can wood core. Top is 1 3⁄4" thick. 1 MS6012 instru. riser shelf 81. If you have selected a cabinet(s) pedestal, be different colors, but drawer interiors are Phenolic Tops 4 PART NO. SIZE 1 TBS60 shelf backstop please see pages 42-43 for cabinet ordering always gray. Features a high-pressure laminate designed for laboratory worksurfaces. Resistant to chemi- LSSTOP-4830 48" long x 30" deep BB bright blue paint instructions, or choose an Easy-Order cabinet LSSTOP-6030 60" long x 30" deep from the appropriate pages. cals, stains or discoloration. Top is 1" thick LSSTOP-7230 72" long x 30" deep phenolic resin, available in black. LSSTOP-8430 84" long x 30" deep LSSTOP-9630 96" long x 30" deep PART NO. SIZE LSSTOP-4836 48" long x 36" deep RTOP-48 48" long x 30" deep LSSTOP-6036 60" long x 36" deep RTOP-60 60" long x 30" deep LSSTOP-7236 72" long x 36" deep RTOP-72 72" long x 30" deep LSSTOP-8436 84" long x 36" deep RTOP-84 84" long x 30" deep LSSTOP-9636 96" long x 36" deep 72 RTOP-96 96" long x 30" deep 73 Workbench Below-Worksurface Accessories

The components on these two Lista How to order a stringer, bottom pages are the options available for Mobile Legs shelf or privacy panel Same basic construc- 1. Select top length supporting your workbench top. tion as the standard leg 2. Specify left-hand (facing the Workbenches may also be sup- but with 2 factory workbench) bench support mounted 6" heavy duty (box ■). ported by a pair of cabinets, or by casters. Leg is available Technical Mobile Legs Stringers/Foot Rests NLL = Lista Leg with rigid casters or Comes with 2 factory-mounted 31⁄ 2"x 11⁄ 4" NTL = technical bench leg one cabinet plus one of the legs Heavy gauge U channel with 2 mounting holes swivel casters with casters. Leg is available with rigid casters or INDUSTRIAL LEG PRIVACY PANEL NW = narrow width cabinet on each end plate. MP = MP width cabinet shown on these pages. locks, indicated by swivel casters with locks, indicated by “RB” 3. Specify right-hand (facing the All parts must be ordered “RB” or “SB” at the or “SB” at the end of the part number. A PART NO. TOP LENGTH end of the part number. stringer is required for 2- leg models. NST-48 ■ ■ 48" workbench) bench support separately. Requires stringer. NST-60 ■ ■ 60" (box ■). PART NO. FOR USE WITH NST-72 ■ ■ 72" ■ ■ NLL = Lista Leg Rigid Casters Rigid Casters NST-84 84" Lista Legs ■ ■ NTL = technical bench leg TM33.5X22.5RB 24" depth top NST-96 96" NW = narrow width cabinet Each welded one-piece leg assembly is 3 1⁄ 8" PART NO. HEIGHT TOP DEPTH TM33.5X28.5RB 30" depth top How to order workbench 1 Technical Bench Legs MP = MP width cabinet NM33.5X22.5RB 33 ⁄ 2" (850mm) 24" (610mm) Swivel Casters wide heavy gauge steel. Each foot has a bot- 1 below-worksurface accessories NM33.5X28.5RB 33 ⁄ 2" (850mm) 30" (762mm) Comes with glides for leveling on uneven sur- TM33.5X22.5SB 24" depth top tom hole for leveling glide or anchor for floor 1 EXAMPLE: to order a bottom shelf 1. Select benchtop length (see NM33.5X34.5RB 33 ⁄ 2" (850mm) 36" (915mm) faces. Can be configured for right or left hand TM33.5X28.5SB 30" depth top mounting. 1 for a workbench with a 72" top, an To order leveling glides, add NM35.5X22.5RB 35 ⁄ 2" (900mm) 24" (610mm) installation. Assembly is required. Removable page 73). NM35.5X28.5RB 35 1⁄ 2" (900mm) 30" (762mm) TECHNICAL LEG PRIVACY PANEL MP Width cabinet as the left-hand “-G” to the end of the part number. end caps allow access to glides. Removable 2. Select base configuration, includ- NM35.5X34.5RB 35 1⁄ 2" (900mm) 36" (915mm) pedestal and a technical bench leg side panel can be ordered in a different color. ing number of cabinets (if any), PART NO. TOP DEPTH as the right-hand pedestal, the part 27 1⁄ 2" (700mm) High Swivel Casters Privacy Panels cabinet size (Narrow Width, PART NO. TOP DEPTH number would be BS-72MPNTL. NLL27.5x22.5 24" (610mm) PART NO. HEIGHT TOP DEPTH Steel panel attaches to leg or cabinet and runs MP Width) and number of legs 27 1⁄ 2" (700mm) High Bottom Shelves NLL27.5x28.5 30" (762mm) NM33.5X22.5SB 33 1⁄ 2" (850mm) 24" (610mm) full length of benchtop. (if any). NTL27.5x22.5 24" (610mm) NLL27.5x34.5 36" (915mm) NM33.5X28.5SB 33 1⁄ 2" (850mm) 30" (762mm) Heavy gauge steel shelf, for use as storage or 1 NTL27.5x28.5 30" (762mm) Note: Sets of legs must be 29 ⁄ 2" (750mm) High NM33.5X34.5SB 33 1⁄ 2" (850mm) 36" (915mm) foot rest. PART NO. TOP LENGTH 29 1⁄ 2" (750mm) High ■ ■ ordered at matching heights. NLL29.5x22.5 24" (610mm) NM35.5X22.5SB 35 1⁄ 2" (900mm) 24" (610mm) NPP-48 48" NTL29.5x22.5 24" (610mm) ■ ■ Individual legs must be ordered to NLL29.5x28.5 30" (762mm) NM35.5X28.5SB 35 1⁄ 2" (900mm) 30" (762mm) PART NO. TOP LENGTH NPP-60 60" NTL29.5x28.5 30" (762mm) ■ ■ NLL29.5x34.5 36" (915mm) NM35.5X34.5SB 35 1⁄ 2" (900mm) 36" (915mm) Bolting Adjustable Height Legs NBS-48 ■ ■ 48" NPP-72 72" match the overall height of the 31 1⁄ 2" (800mm) High 31 1⁄ 2" (800mm) High NBS-60 ■ ■ 60" NPP-84 ■ ■ 84" NTL31.5x22.5 24" (610mm) Workbench height is adjusted by bolting frame cabinet or cabinet plus base (see NLL31.5x22.5 24" (610mm) NBS-72 ■ ■ 72" NPP-96 ■ ■ 96" NTL31.5x28.5 30" (762mm) in place. Height adjusts in 2" increments. chart to right). NLL31.5x28.5 30" (762mm) Lista Panel NBS-84 ■ ■ 84" 33 1⁄ 2" (850mm) High 1 1 3. Select stringer, bottom shelf or NLL31.5x34.5 36" (915mm) Legs Range is 27 ⁄ 2" to 39 ⁄ 2". Workbench top NBS-96 ■ ■ 96" NTL33.5x22.5 24" (610mm) privacy panel part numbers to 33 1⁄ 2" (850mm) High Same basic construc- and accessories must be ordered separately. NLL33.5x22.5 24" (610mm) NTL33.5x28.5 30" (762mm) correspond to both length of tion as the standard 1 Uses stringers and bottom shelves shown in NLL33.5x28.5 30" (762mm) 35 ⁄ 2" (900mm) High Lista Leg with a the charts to the right (privacy panel not benchtop and base configuration. NLL33.5x34.5 36" (915mm) NTL35.5x22.5 24" (610mm) available). 4. Specify color from the chart on 39 1⁄ 2" (1000mm) High welded panel on the NTL35.5x28.5 30" (762mm) 1 NLL39.5x22.5 24" (610mm) outside of the leg. 39 ⁄ 2" (1000mm) High the back cover. PART NO. FOR USE WITH NLL39.5x28.5 30" (762mm) NTL39.5x22.5 24" (610mm) For Lista Legs only. ALL22.5 24" depth top NLL39.5x34.5 36" (915mm) NTL39.5x28.5 30" (762mm) ALL28.5 30" depth top PART NO. TOP DEPTH ALL34.5 36" depth top 27 1⁄ 2" (700mm) High NPL27.5x22.5 24" (610mm) Leg Heights NPL27.5x28.5 30" (762mm) Use the leg heights shown below to NPL27.5x34.5 36" (915mm) match a cabinet pedestal in a leg-plus- 29 1⁄ 2" (750mm) High cabinet below worksurface configuration. NPL29.5x22.5 24" (610mm) NPL29.5x28.5 30" (762mm) LEG HEIGHT MATCHES CAB. PEDESTAL NPL29.5x34.5 36" (915mm) 1 1 27 /2" 600 height without base 31 ⁄ 2" (800mm) High 1 29 /2" 600 height with 2" base NPL31.5x22.5 24" (610mm) 1 31 /2" 600 height with 4" base NPL31.5x28.5 30" (762mm) 1 33 /2" 600 height with 6" base or NPL31.5x34.5 36" (915mm) 1 750 height without base 33 ⁄ 2" (850mm) High 1 35 /2" mobile 600 height with mobile base NPL33.5x22.5 24" (610mm) 1 39 /2" 900 height without base NPL33.5x28.5 30" (762mm) NPL33.5x34.5 36" (915mm) 39 1⁄ 2" (1000mm) High NPL39.5x22.5 24" (610mm) NPL39.5x28.5 30" (762mm) NPL39.5x34.5 36" (915mm) 74 75 Workbench Below-Worksurface Accessories

The components on these two Lista How to order a stringer, bottom pages are the options available for Mobile Legs shelf or privacy panel Same basic construc- 1. Select top length supporting your workbench top. tion as the standard leg 2. Specify left-hand (facing the Workbenches may also be sup- but with 2 factory workbench) bench support mounted 6" heavy duty (box ■). ported by a pair of cabinets, or by casters. Leg is available Technical Mobile Legs Stringers/Foot Rests NLL = Lista Leg with rigid casters or Comes with 2 factory-mounted 31⁄ 2"x 11⁄ 4" NTL = technical bench leg one cabinet plus one of the legs Heavy gauge U channel with 2 mounting holes swivel casters with casters. Leg is available with rigid casters or INDUSTRIAL LEG PRIVACY PANEL NW = narrow width cabinet on each end plate. MP = MP width cabinet shown on these pages. locks, indicated by swivel casters with locks, indicated by “RB” 3. Specify right-hand (facing the All parts must be ordered “RB” or “SB” at the or “SB” at the end of the part number. A PART NO. TOP LENGTH end of the part number. stringer is required for 2- leg models. NST-48 ■ ■ 48" workbench) bench support separately. Requires stringer. NST-60 ■ ■ 60" (box ■). PART NO. FOR USE WITH NST-72 ■ ■ 72" ■ ■ NLL = Lista Leg Rigid Casters Rigid Casters NST-84 84" Lista Legs ■ ■ NTL = technical bench leg TM33.5X22.5RB 24" depth top NST-96 96" NW = narrow width cabinet Each welded one-piece leg assembly is 3 1⁄ 8" PART NO. HEIGHT TOP DEPTH TM33.5X28.5RB 30" depth top How to order workbench 1 Technical Bench Legs MP = MP width cabinet NM33.5X22.5RB 33 ⁄ 2" (850mm) 24" (610mm) Swivel Casters wide heavy gauge steel. Each foot has a bot- 1 below-worksurface accessories NM33.5X28.5RB 33 ⁄ 2" (850mm) 30" (762mm) Comes with glides for leveling on uneven sur- TM33.5X22.5SB 24" depth top tom hole for leveling glide or anchor for floor 1 EXAMPLE: to order a bottom shelf 1. Select benchtop length (see NM33.5X34.5RB 33 ⁄ 2" (850mm) 36" (915mm) faces. Can be configured for right or left hand TM33.5X28.5SB 30" depth top mounting. 1 for a workbench with a 72" top, an To order leveling glides, add NM35.5X22.5RB 35 ⁄ 2" (900mm) 24" (610mm) installation. Assembly is required. Removable page 73). NM35.5X28.5RB 35 1⁄ 2" (900mm) 30" (762mm) TECHNICAL LEG PRIVACY PANEL MP Width cabinet as the left-hand “-G” to the end of the part number. end caps allow access to glides. Removable 2. Select base configuration, includ- NM35.5X34.5RB 35 1⁄ 2" (900mm) 36" (915mm) pedestal and a technical bench leg side panel can be ordered in a different color. ing number of cabinets (if any), PART NO. TOP DEPTH as the right-hand pedestal, the part 27 1⁄ 2" (700mm) High Swivel Casters Privacy Panels cabinet size (Narrow Width, PART NO. TOP DEPTH number would be BS-72MPNTL. NLL27.5x22.5 24" (610mm) PART NO. HEIGHT TOP DEPTH Steel panel attaches to leg or cabinet and runs MP Width) and number of legs 27 1⁄ 2" (700mm) High Bottom Shelves NLL27.5x28.5 30" (762mm) NM33.5X22.5SB 33 1⁄ 2" (850mm) 24" (610mm) full length of benchtop. (if any). NTL27.5x22.5 24" (610mm) NLL27.5x34.5 36" (915mm) NM33.5X28.5SB 33 1⁄ 2" (850mm) 30" (762mm) Heavy gauge steel shelf, for use as storage or 1 NTL27.5x28.5 30" (762mm) Note: Sets of legs must be 29 ⁄ 2" (750mm) High NM33.5X34.5SB 33 1⁄ 2" (850mm) 36" (915mm) foot rest. PART NO. TOP LENGTH 29 1⁄ 2" (750mm) High ■ ■ ordered at matching heights. NLL29.5x22.5 24" (610mm) NM35.5X22.5SB 35 1⁄ 2" (900mm) 24" (610mm) NPP-48 48" NTL29.5x22.5 24" (610mm) ■ ■ Individual legs must be ordered to NLL29.5x28.5 30" (762mm) NM35.5X28.5SB 35 1⁄ 2" (900mm) 30" (762mm) PART NO. TOP LENGTH NPP-60 60" NTL29.5x28.5 30" (762mm) ■ ■ NLL29.5x34.5 36" (915mm) NM35.5X34.5SB 35 1⁄ 2" (900mm) 36" (915mm) Bolting Adjustable Height Legs NBS-48 ■ ■ 48" NPP-72 72" match the overall height of the 31 1⁄ 2" (800mm) High 31 1⁄ 2" (800mm) High NBS-60 ■ ■ 60" NPP-84 ■ ■ 84" NTL31.5x22.5 24" (610mm) Workbench height is adjusted by bolting frame cabinet or cabinet plus base (see NLL31.5x22.5 24" (610mm) NBS-72 ■ ■ 72" NPP-96 ■ ■ 96" NTL31.5x28.5 30" (762mm) in place. Height adjusts in 2" increments. chart to right). NLL31.5x28.5 30" (762mm) Lista Panel NBS-84 ■ ■ 84" 33 1⁄ 2" (850mm) High 1 1 3. Select stringer, bottom shelf or NLL31.5x34.5 36" (915mm) Legs Range is 27 ⁄ 2" to 39 ⁄ 2". Workbench top NBS-96 ■ ■ 96" NTL33.5x22.5 24" (610mm) privacy panel part numbers to 33 1⁄ 2" (850mm) High Same basic construc- and accessories must be ordered separately. NLL33.5x22.5 24" (610mm) NTL33.5x28.5 30" (762mm) correspond to both length of tion as the standard 1 Uses stringers and bottom shelves shown in NLL33.5x28.5 30" (762mm) 35 ⁄ 2" (900mm) High Lista Leg with a the charts to the right (privacy panel not benchtop and base configuration. NLL33.5x34.5 36" (915mm) NTL35.5x22.5 24" (610mm) available). 4. Specify color from the chart on 39 1⁄ 2" (1000mm) High welded panel on the NTL35.5x28.5 30" (762mm) 1 NLL39.5x22.5 24" (610mm) outside of the leg. 39 ⁄ 2" (1000mm) High the back cover. PART NO. FOR USE WITH NLL39.5x28.5 30" (762mm) NTL39.5x22.5 24" (610mm) For Lista Legs only. ALL22.5 24" depth top NLL39.5x34.5 36" (915mm) NTL39.5x28.5 30" (762mm) ALL28.5 30" depth top PART NO. TOP DEPTH ALL34.5 36" depth top 27 1⁄ 2" (700mm) High NPL27.5x22.5 24" (610mm) Leg Heights NPL27.5x28.5 30" (762mm) Use the leg heights shown below to NPL27.5x34.5 36" (915mm) match a cabinet pedestal in a leg-plus- 29 1⁄ 2" (750mm) High cabinet below worksurface configuration. NPL29.5x22.5 24" (610mm) NPL29.5x28.5 30" (762mm) LEG HEIGHT MATCHES CAB. PEDESTAL NPL29.5x34.5 36" (915mm) 1 1 27 /2" 600 height without base 31 ⁄ 2" (800mm) High 1 29 /2" 600 height with 2" base NPL31.5x22.5 24" (610mm) 1 31 /2" 600 height with 4" base NPL31.5x28.5 30" (762mm) 1 33 /2" 600 height with 6" base or NPL31.5x34.5 36" (915mm) 1 750 height without base 33 ⁄ 2" (850mm) High 1 35 /2" mobile 600 height with mobile base NPL33.5x22.5 24" (610mm) 1 39 /2" 900 height without base NPL33.5x28.5 30" (762mm) NPL33.5x34.5 36" (915mm) 39 1⁄ 2" (1000mm) High NPL39.5x22.5 24" (610mm) NPL39.5x28.5 30" (762mm) NPL39.5x34.5 36" (915mm) 74 75 Height-Right® Workbenches

The Height-Right workbench is Innovative features include: Height-Right Easy-Order Cabinets 3 a clean, aesthetically pleasing • Precision drive system for relia- Cabinets are 24 ⁄16" high (including base) x 16 7⁄8" wide x 28 1⁄2" deep. workbench that brings to the user bility and low maintenance How to order a Height-Right an unsurpassed level of ergonomic • Available in 48", 60" and 72" Easy-Order Cabinet comfort, flexible functionality and lengths and 30" and 36" depths 1. Select Easy-Order Cabinet Combi- Height-Right Hanging Cabinets nation either with or without enhanced productivity. With an (custom sizes are available upon drawer interior sets. An “A” at Height-Right® Electric Bases These cabinets provide convenient below-work- the end of the part number (i.e., electrically adjustable bench height request) Workbench top and accessories must be surface storage where less than a full cabinet NW375-2A) designates that the ordered separately. Includes stringer. pedestal (see right) is needed. All Narrow ranging from 28" to 43" (15" • Available in ten standard colors cabinet comes with drawer inte- Width (NW) cabinets are 16 7⁄8" wide x 28 1⁄2" rior sets (shown on page 13). total), this workspace solution is (shown on the back cover) PART NO. FOR USE WITH TOP SIZE deep. All MP Width cabinets are 22 3⁄16" HR4830E 48" x 30" 2. Select lock type (box ■). For lock wide x 28 1⁄ 2" deep. Each cabinet is sus- designed with the operator in • Load capacity 1200 lb. static and HR6030E 60" x 30" options see page 42. pended from the workbench top, and comes HR7230E 72" x 30" Height-Right Manual Crank N = none K = keyed-alike mind. It reduces fatigue, stress and 600 lb. dynamic HR4836E 48" x 36" with an individual lock and 2 keys. Bases I = individual M = master potential injury. The Height-Right • One foot per minute adjusting HR6036E 60" x 36" 3. Select color(s) for housing and HR7236E 72" x 36" Workbench height is adjusted by non-electric PART NO. DRAWER HEIGHT drawer fronts (see back cover for workbench is ideally suited for the speed manual crank. Workbench top and accessories HC/NW50-HR 1 3⁄ 8" HC/NW75-HR 2 3⁄ 8" color chart). must be ordered separately. Includes stringer. 3 repairing, testing, and assembling HC/NW100-HR 3 ⁄ 8" EXAMPLE: to order an NW375-2A HC/NW150-HR 5 1⁄ 4" PART NO. FOR USE WITH TOP SIZE of mechanical and electronic prod- HC/NW300FFH-HR 11" cabinet with an individual lock, and a HR4830C 48" x 30" HC/MP50-HR 1 3⁄ 8" Bright Blue cabinet housing and Pearl HR6030C 60" x 30" ucts and components. HC/MP75-HR 2 3⁄ 8" HR7230C 72" x 30" Gray drawers, the part number would HC/MP100-HR 3 3⁄ 8" HR4836C 48" x 36" be NW375-2A-I , and the paint color HC/MP150-HR 5 1⁄ 4" HR6036C 60" x 36" codes would be “BB” for the housing HR7236C 72" x 36" and “PG” for the drawer fronts.

DRAWER INTERIOR 75N 209 Height-Right Mobile Kit 300N-FFH FILE DRAWER Comes with four 3 1⁄ 2" x 1 1⁄4" swivel cast- ers, 2 with lock and 2 without lock. Casters 5" BASE add 4 3⁄4" to overall height. To order, add PART NO. DRAWERS COMPARTS. ■ “-M” to end of electric or manual NW375-1- 2- NW375-1A-■ 29 crank base part number. Compatible with all Lista above- DRAWER INTERIOR 75N 209 worksurface workbench options 100N 104 200N 104

5" BASE PART NO. DRAWERS COMPARTS. Height-Right Companion NW375-2-■ 3- Plastic laminate, maple, ESD and NW375-2A-■ 317 phenolic worksurfaces Cabinets Cabinet fits over workbench stringer. Height of DRAWER INTERIOR 75N 209 cabinet conforms to lowest height of Height- 75N 209 Easily accessible operator switch 100N 104 Right benchtop. Height-Right Easy-Order 125N 104

cabinets are shown to the right. 5" BASE PART NO. DRAWERS COMPARTS. Removable leg panel, allows for ■ two-tone color selections NW375-3- 4- NW375-3A-■ 426

Optional companion cabinet or DRAWER INTERIOR 75N 018 hanging cabinet 75N 209 75N 209 75N 104 75N 104 Companion cabinet (see column to far Removable leg end 5" BASE caps, for clean look right) fits perfectly under the Height- PART NO. DRAWERS COMPARTS. and quick access to Right benchtop at its lowest 28" height. NW375-4-■ 5- leveling adjustments NW375-4A-■ 544 76 77 Height-Right® Workbenches

The Height-Right workbench is Innovative features include: Height-Right Easy-Order Cabinets 3 a clean, aesthetically pleasing • Precision drive system for relia- Cabinets are 24 ⁄16" high (including base) x 16 7⁄8" wide x 28 1⁄2" deep. workbench that brings to the user bility and low maintenance How to order a Height-Right an unsurpassed level of ergonomic • Available in 48", 60" and 72" Easy-Order Cabinet comfort, flexible functionality and lengths and 30" and 36" depths 1. Select Easy-Order Cabinet Combi- Height-Right Hanging Cabinets nation either with or without enhanced productivity. With an (custom sizes are available upon drawer interior sets. An “A” at Height-Right® Electric Bases These cabinets provide convenient below-work- the end of the part number (i.e., electrically adjustable bench height request) Workbench top and accessories must be surface storage where less than a full cabinet NW375-2A) designates that the ordered separately. Includes stringer. pedestal (see right) is needed. All Narrow ranging from 28" to 43" (15" • Available in ten standard colors cabinet comes with drawer inte- Width (NW) cabinets are 16 7⁄8" wide x 28 1⁄2" rior sets (shown on page 13). total), this workspace solution is (shown on the back cover) PART NO. FOR USE WITH TOP SIZE deep. All MP Width cabinets are 22 3⁄16" HR4830E 48" x 30" 2. Select lock type (box ■). For lock wide x 28 1⁄ 2" deep. Each cabinet is sus- designed with the operator in • Load capacity 1200 lb. static and HR6030E 60" x 30" options see page 42. pended from the workbench top, and comes HR7230E 72" x 30" Height-Right Manual Crank N = none K = keyed-alike mind. It reduces fatigue, stress and 600 lb. dynamic HR4836E 48" x 36" with an individual lock and 2 keys. Bases I = individual M = master potential injury. The Height-Right • One foot per minute adjusting HR6036E 60" x 36" 3. Select color(s) for housing and HR7236E 72" x 36" Workbench height is adjusted by non-electric PART NO. DRAWER HEIGHT drawer fronts (see back cover for workbench is ideally suited for the speed manual crank. Workbench top and accessories HC/NW50-HR 1 3⁄ 8" HC/NW75-HR 2 3⁄ 8" color chart). must be ordered separately. Includes stringer. 3 repairing, testing, and assembling HC/NW100-HR 3 ⁄ 8" EXAMPLE: to order an NW375-2A HC/NW150-HR 5 1⁄ 4" PART NO. FOR USE WITH TOP SIZE of mechanical and electronic prod- HC/NW300FFH-HR 11" cabinet with an individual lock, and a HR4830C 48" x 30" HC/MP50-HR 1 3⁄ 8" Bright Blue cabinet housing and Pearl HR6030C 60" x 30" ucts and components. HC/MP75-HR 2 3⁄ 8" HR7230C 72" x 30" Gray drawers, the part number would HC/MP100-HR 3 3⁄ 8" HR4836C 48" x 36" be NW375-2A-I , and the paint color HC/MP150-HR 5 1⁄ 4" HR6036C 60" x 36" codes would be “BB” for the housing HR7236C 72" x 36" and “PG” for the drawer fronts.

DRAWER INTERIOR 75N 209 Height-Right Mobile Kit 300N-FFH FILE DRAWER Comes with four 3 1⁄ 2" x 1 1⁄4" swivel cast- ers, 2 with lock and 2 without lock. Casters 5" BASE add 4 3⁄4" to overall height. To order, add PART NO. DRAWERS COMPARTS. ■ “-M” to end of electric or manual NW375-1- 2- NW375-1A-■ 29 crank base part number. Compatible with all Lista above- DRAWER INTERIOR 75N 209 worksurface workbench options 100N 104 200N 104

5" BASE PART NO. DRAWERS COMPARTS. Height-Right Companion NW375-2-■ 3- Plastic laminate, maple, ESD and NW375-2A-■ 317 phenolic worksurfaces Cabinets Cabinet fits over workbench stringer. Height of DRAWER INTERIOR 75N 209 cabinet conforms to lowest height of Height- 75N 209 Easily accessible operator switch 100N 104 Right benchtop. Height-Right Easy-Order 125N 104

cabinets are shown to the right. 5" BASE PART NO. DRAWERS COMPARTS. Removable leg panel, allows for ■ two-tone color selections NW375-3- 4- NW375-3A-■ 426

Optional companion cabinet or DRAWER INTERIOR 75N 018 hanging cabinet 75N 209 75N 209 75N 104 75N 104 Companion cabinet (see column to far Removable leg end 5" BASE caps, for clean look right) fits perfectly under the Height- PART NO. DRAWERS COMPARTS. and quick access to Right benchtop at its lowest 28" height. NW375-4-■ 5- leveling adjustments NW375-4A-■ 544 76 77 Workbench Above-Worksurface Accessories

VAILA A B D L S E E The bench components on these Instrument Riser Shelf ESD Accessories two pages allow you to customize Rear Panels Full rear panel extends from benchtop to form above the worksurface for your back panel between the worksurface and riser Backstops and Endstops particular needs. shelf, flush with the shelf. Also available with Made of steel with rounded edges for safety. Adjustable Riser Shelf a 2" backstop for the riser shelf. To order a All parts must be ordered sepa- Stops extend approximately 3" above the Stationary Riser Shelves Assemblies backstop for an instrument riser shelf without workbench top. rear panel, see the chart on page 78. rately to match the length of the Made of steel to support heavy loads. Shelf is Shelves measure 1 1⁄4" thick x 12" deep, 10 1⁄2" deep x 13 1⁄2" high. Optional full rear available in laminated gray plastic, static dissi- Instrument Riser Shelf Supports Instrument Riser Shelves workbench top you have chosen. Backstops 1 Rear Panel Wrist Strap and Cord panel (shown above) extends from benchtop pative white plastic or maple. Shelf can be Either 16", 20" or 24" high, channel-front All shelves measure 1 ⁄4" thick x 12" or 15" PART NO. TOP LENGTH PART NO. TOP SHELF SUPPORT 3M Charge-Guard ® adjustable wrist strap with to form back panel and backstop for shelf (part adjusted in 1 1⁄2" increments from a low of with smooth finished corners and removable deep and mount to shelf supports. Add “12” TBS-48 48" LENGTH HEIGHT 5' coiled cord. TBS-60 60" number ending in -2). Contact Lista for other 12" to an overall height of 18". A separate side panels. 20" and 24" models provide or “15” in place of the red box in the part IRS-FRP4816 48" 16" TBS-72 72" sizes. extra space to run air lines or meet additional number to specify a shelf depth of 12" or 15" IRS-FRP4820 48" 20" TBS-84 84" steel backstop with rounded corners is avail- IRS-FRP4824 48" 24" PART NO. DESCRIPTION able for the shelf. Includes the number of power requirements. Ordered individually. Backstops for instrument riser shelves can be WS wrist strap and cord TBS-96 96" Open Riser Shelves IRS-FRP6016 60" 16" ordered from the chart on page 78. IRS-FRP6020 60" 20" open shelf (open back, no shelf backstop) adjustable support brackets shown in the charts. Backstop and Endstop Sets 16" Instrument Riser Shelf Supports IRS-FRP6024 60" 24" PART NO. TOP LENGTH Static Dissipative Instrument Riser IRS-FRP7216 72" 16" • Shelf PART NO. HEIGHT DESCRIPTION ● PART NO. TOP LENGTH Plastic Adjustable Riser Shelf Assembly ■ ground SRS48 48" IRSS16 16" no power Shelves* IRS-FRP7220 72" 20" BES-48 48" ■ SRS60 60" PART NO. TOP LENGTH SUPPORTS IRS-FRP7224 72" 24" ■ BES-60 60" IRSS16/15 16" with 15 amp PART NO. LENGTH FINISH ■ ■ SRS72 72" ARS48P 48" 2 IRSS16/20 16" with 20 amp SD48■ 48" white laminate ■ BES-72 72" ■ BES-84 84" SRS84 84" ARS60P 60" 2 IRSS16/GF-15 16" with 15 amp GFCI SD60■ 60" white laminate Rear Panel with 2" Backstop • Wrist BES-96 96" SRS96 96" ARS72P 72" 2 SD72■ 72" white laminate PART NO. TOP SHELF SUPPORT strap ■ ARS84P 84" 3 20" Instrument Riser Shelf Supports SD84 ** 84" white laminate LENGTH HEIGHT • • • To earth Open Riser Shelves with Shelf Backstop ■ ARS96P 96" 3 PART NO. HEIGHT DESCRIPTION SD96 ** 96" white laminate IRS-FRP4816-2 48" 16" ground shelf with backstop (open back) Ground block Common ground IRSS20 20" no power * See page 73 for static dissipative specifications. IRS-FRP4820-2 48" 20" PART NO. TOP LENGTH Static Dissipative Adjustable Riser Shelf IRSS20/15 20" with 15 amp Comes with grounding bolt and grounding cord. IRS-FRP4824-2 48" 24" SRS48-1 48" Assembly* IRSS20/20 20" with 20 amp ** Lista recommends using a center support with 84" IRS-FRP6016-2 60" 16" Ground Block and Cord IRS-FRP6020-2 60" 20" SRS60-1 60" IRSS20/GF-15 20" with15 amp GFCI and 96" shelves Ground block provides a convenient common PART NO. TOP LENGTH SUPPORTS IRS-FRP6024-2 60" 24" SRS72-1 72" ARS48SD 48" 2 grounding location for 2 wrist straps. Mounts Plastic Laminate Instrument Riser IRS-FRP7216-2 72" 16" SRS84-1 84" ARS60SD 60" 2 24" Instrument Riser Shelf Supports Shelves IRS-FRP7220-2 72" 20" to any flat, rigid surface. Ground cords are SRS96-1 96" ARS72SD 72" 2 PART NO. HEIGHT DESCRIPTION IRS-FRP7224-2 72" 24" included with static dissipative tops and IRSS24 24" no power PART NO. LENGTH FINISH ARS84SD 84" 3 ■ shelves, but can be ordered separately. Riser Shelves with Full Panel (Shown) ARS96SD 96" 3 IRSS24/15 24" with 15 amp PS48 48" gray laminate closed back, with shelf backstop PS60■ 60" gray laminate *See page 73 for static dissipative specifications. IRSS24/20 24" with 20 amp IRSS24/GF-15 24" with15 amp GFCI PS72■ 72" gray laminate PART NO. DESCRIPTION PART NO. TOP LENGTH DESCRIPTION Comes with grounding bolt and grounding cord. PS84■* 84" gray laminate GB ground block SRS48-2 48" riser shelf PS96■* 96" gray laminate GCT ground cord for top SRS60-2 60" riser shelf Maple Adjustable Riser Shelf Assembly SRS72-2 72" riser shelf * Lista recommends using a center support with 84" GCS ground cord for shelf SRS84-2 84" riser shelf PART NO. TOP LENGTH SUPPORTS and 96" shelves SRS96-2 96" riser shelf ARS48M 48" 2 Outlet Strips ES any endstops (pair) ARS60M 60" 2 Maple Instrument Riser Shelves Static Dissipative Plastic ARS72M 72" 2 Available in 15 amp or 20 amp, and GFCI. PART NO. LENGTH FINISH Laminate Top ARS84M 84" 2 MS48■ 48" maple Lighted on/off switch, 6' cord with grounded See page 73. ARS96M 96" 3 MS60■ 60" maple plug and circuit breaker. 110V. ■ Riser Shelf Backstops (For Adjustable MS72 72" maple Static Dissipative Plastic Insert MS84■* 84" maple and Instruments Risers) PART NO. DESCRIP. OUTLETS LGTH. Boxes MS96■* 96" maple EOP15-15 15 amp 6 15" Made of steel with rounded edges for safety. * Lista recommends using a center support with 84" EOP15-20 20 amp 6 15" See page 119. Stops extend approximately 3" above the shelf and 96" shelves EOP15-GF-15 GFCI-15 amp 6 15" EOP-48 15 amp 8 48" Static Dissipative Paint surface. See back cover for paint colors available with PART NO. TOP LENGTH ESD properties. ARSBS-48 48" ARSBS-60 60" ARSBS-72 72" ARSBS-84 84" ARSBS-96 96"

Adjustable Support Bracket This support bracket, which must be ordered separately, provides additional support for heavy loads.

PART NO. ARS-BR 78 79 Workbench Above-Worksurface Accessories

VAILA A B D L S E E The bench components on these Instrument Riser Shelf ESD Accessories two pages allow you to customize Rear Panels Full rear panel extends from benchtop to form above the worksurface for your back panel between the worksurface and riser Backstops and Endstops particular needs. shelf, flush with the shelf. Also available with Made of steel with rounded edges for safety. Adjustable Riser Shelf a 2" backstop for the riser shelf. To order a All parts must be ordered sepa- Stops extend approximately 3" above the Stationary Riser Shelves Assemblies backstop for an instrument riser shelf without workbench top. rear panel, see the chart on page 78. rately to match the length of the Made of steel to support heavy loads. Shelf is Shelves measure 1 1⁄4" thick x 12" deep, 10 1⁄2" deep x 13 1⁄2" high. Optional full rear available in laminated gray plastic, static dissi- Instrument Riser Shelf Supports Instrument Riser Shelves workbench top you have chosen. Backstops 1 Rear Panel Wrist Strap and Cord panel (shown above) extends from benchtop pative white plastic or maple. Shelf can be Either 16", 20" or 24" high, channel-front All shelves measure 1 ⁄4" thick x 12" or 15" PART NO. TOP LENGTH PART NO. TOP SHELF SUPPORT 3M Charge-Guard ® adjustable wrist strap with to form back panel and backstop for shelf (part adjusted in 1 1⁄2" increments from a low of with smooth finished corners and removable deep and mount to shelf supports. Add “12” TBS-48 48" LENGTH HEIGHT 5' coiled cord. TBS-60 60" number ending in -2). Contact Lista for other 12" to an overall height of 18". A separate side panels. 20" and 24" models provide or “15” in place of the red box in the part IRS-FRP4816 48" 16" TBS-72 72" sizes. extra space to run air lines or meet additional number to specify a shelf depth of 12" or 15" IRS-FRP4820 48" 20" TBS-84 84" steel backstop with rounded corners is avail- IRS-FRP4824 48" 24" PART NO. DESCRIPTION able for the shelf. Includes the number of power requirements. Ordered individually. Backstops for instrument riser shelves can be WS wrist strap and cord TBS-96 96" Open Riser Shelves IRS-FRP6016 60" 16" ordered from the chart on page 78. IRS-FRP6020 60" 20" open shelf (open back, no shelf backstop) adjustable support brackets shown in the charts. Backstop and Endstop Sets 16" Instrument Riser Shelf Supports IRS-FRP6024 60" 24" PART NO. TOP LENGTH Static Dissipative Instrument Riser IRS-FRP7216 72" 16" • Shelf PART NO. HEIGHT DESCRIPTION ● PART NO. TOP LENGTH Plastic Adjustable Riser Shelf Assembly ■ ground SRS48 48" IRSS16 16" no power Shelves* IRS-FRP7220 72" 20" BES-48 48" ■ SRS60 60" PART NO. TOP LENGTH SUPPORTS IRS-FRP7224 72" 24" ■ BES-60 60" IRSS16/15 16" with 15 amp PART NO. LENGTH FINISH ■ ■ SRS72 72" ARS48P 48" 2 IRSS16/20 16" with 20 amp SD48■ 48" white laminate ■ BES-72 72" ■ BES-84 84" SRS84 84" ARS60P 60" 2 IRSS16/GF-15 16" with 15 amp GFCI SD60■ 60" white laminate Rear Panel with 2" Backstop • Wrist BES-96 96" SRS96 96" ARS72P 72" 2 SD72■ 72" white laminate PART NO. TOP SHELF SUPPORT strap ■ ARS84P 84" 3 20" Instrument Riser Shelf Supports SD84 ** 84" white laminate LENGTH HEIGHT • • • To earth Open Riser Shelves with Shelf Backstop ■ ARS96P 96" 3 PART NO. HEIGHT DESCRIPTION SD96 ** 96" white laminate IRS-FRP4816-2 48" 16" ground shelf with backstop (open back) Ground block Common ground IRSS20 20" no power * See page 73 for static dissipative specifications. IRS-FRP4820-2 48" 20" PART NO. TOP LENGTH Static Dissipative Adjustable Riser Shelf IRSS20/15 20" with 15 amp Comes with grounding bolt and grounding cord. IRS-FRP4824-2 48" 24" SRS48-1 48" Assembly* IRSS20/20 20" with 20 amp ** Lista recommends using a center support with 84" IRS-FRP6016-2 60" 16" Ground Block and Cord IRS-FRP6020-2 60" 20" SRS60-1 60" IRSS20/GF-15 20" with15 amp GFCI and 96" shelves Ground block provides a convenient common PART NO. TOP LENGTH SUPPORTS IRS-FRP6024-2 60" 24" SRS72-1 72" ARS48SD 48" 2 grounding location for 2 wrist straps. Mounts Plastic Laminate Instrument Riser IRS-FRP7216-2 72" 16" SRS84-1 84" ARS60SD 60" 2 24" Instrument Riser Shelf Supports Shelves IRS-FRP7220-2 72" 20" to any flat, rigid surface. Ground cords are SRS96-1 96" ARS72SD 72" 2 PART NO. HEIGHT DESCRIPTION IRS-FRP7224-2 72" 24" included with static dissipative tops and IRSS24 24" no power PART NO. LENGTH FINISH ARS84SD 84" 3 ■ shelves, but can be ordered separately. Riser Shelves with Full Panel (Shown) ARS96SD 96" 3 IRSS24/15 24" with 15 amp PS48 48" gray laminate closed back, with shelf backstop PS60■ 60" gray laminate *See page 73 for static dissipative specifications. IRSS24/20 24" with 20 amp IRSS24/GF-15 24" with15 amp GFCI PS72■ 72" gray laminate PART NO. DESCRIPTION PART NO. TOP LENGTH DESCRIPTION Comes with grounding bolt and grounding cord. PS84■* 84" gray laminate GB ground block SRS48-2 48" riser shelf PS96■* 96" gray laminate GCT ground cord for top SRS60-2 60" riser shelf Maple Adjustable Riser Shelf Assembly SRS72-2 72" riser shelf * Lista recommends using a center support with 84" GCS ground cord for shelf SRS84-2 84" riser shelf PART NO. TOP LENGTH SUPPORTS and 96" shelves SRS96-2 96" riser shelf ARS48M 48" 2 Outlet Strips ES any endstops (pair) ARS60M 60" 2 Maple Instrument Riser Shelves Static Dissipative Plastic ARS72M 72" 2 Available in 15 amp or 20 amp, and GFCI. PART NO. LENGTH FINISH Laminate Top ARS84M 84" 2 MS48■ 48" maple Lighted on/off switch, 6' cord with grounded See page 73. ARS96M 96" 3 MS60■ 60" maple plug and circuit breaker. 110V. ■ Riser Shelf Backstops (For Adjustable MS72 72" maple Static Dissipative Plastic Insert MS84■* 84" maple and Instruments Risers) PART NO. DESCRIP. OUTLETS LGTH. Boxes MS96■* 96" maple EOP15-15 15 amp 6 15" Made of steel with rounded edges for safety. * Lista recommends using a center support with 84" EOP15-20 20 amp 6 15" See page 119. Stops extend approximately 3" above the shelf and 96" shelves EOP15-GF-15 GFCI-15 amp 6 15" EOP-48 15 amp 8 48" Static Dissipative Paint surface. See back cover for paint colors available with PART NO. TOP LENGTH ESD properties. ARSBS-48 48" ARSBS-60 60" ARSBS-72 72" ARSBS-84 84" ARSBS-96 96"

Adjustable Support Bracket This support bracket, which must be ordered separately, provides additional support for heavy loads.

PART NO. ARS-BR 78 79 Industrial Easy-Order Workbench Combinations

All workbench tops have a standard Workbenches with No Above- Workbenches with Backstop and Workbenches with Stationary Workbenches with Adjustable Workbench Hanging Workbench Pedestals How to order Easy-Order Cabinets square edge and are 30" deep. Worksurface Accessories Endstops Riser Shelf Riser Shelf Cabinets The Easy-Order MP Width cabinets below are The 2 columns to the right of each Workbench components shown in gray Riser shelf includes backstop and full rear panel. Top and riser shelf include backstop. among our most popular as below-worksurface cabinet illustration indicate drawer in the illustrations do not come with Workbench includes endstops. Workbench includes endstops. storage for workbenches. All are 33 1⁄ 2" high heights and drawer interior sets. (For the workbench and must be ordered x 22 3⁄16" wide x 28 1⁄ 2" deep. See the drawer capacities and sizes, see page separately. To choose Easy-Order column to the right for ordering instructions. 11.) Below the illustration, you will cabinet pedestals, see page 12 for For additional choices of Easy-Order cabinet find part numbers, the number of Narrow Width cabinets and page 14 pedestals, see page 12 for Narrow Width cabi- drawers, and the number of drawer for MP Width cabinets, or see page nets and page 14 for MP Width cabinets. compartments created by the interior 81 for frequently ordered cabinet The cabinets below provide convenient below- sets (shown on page 15). worksurface storage where less than a full cabi- pedestals. For hanging cabinets, see DRAWER INTERIOR net pedestal is needed. 75N 510 1. Select Easy-Order Cabinet Combi- page 81. 75N 018 PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE 100N 316 nation either with or without Series WB5_ and WS10_ benches 150N 209 WB50-■-■ optional hanging cabinet WB51-■-■ optional hanging cabinet WB52-■-■ optional hanging cabinet WB53-■-■ optional hanging cabinet Single Drawer drawer interior sets. An “A” at have Lista Legs. The height of the legs 7 200N 104 stringer stringer stringer stringer All Narrow Width (NW) units are 16 ⁄8" the end of the part number (i.e., of WB5_ and WS10_ benches is 1 wide x 28 ⁄ 2" deep. All MP Width units are 6" BASE MP600-2A) designates that the 33 1⁄ 2". The height of the legs of 3 1 22 ⁄16" wide x 28 ⁄ 2" deep. Each unit cabinet comes with drawer inte- WB6_ and WS11_ benches is 35 1⁄ 2". is suspended from the workbench top, and PART NO. DRAWERS COMPARTS. MP600-2-■ 5- rior sets (shown on page 15). How to order an Industrial comes with an individual lock and 2 keys. MP600-2A -■ 557 2. Select lock type (box ■). For lock options see page 42. Easy-Order Workbench PART NO. DRAWER HEIGHT DRAWER INTERIOR N = none 1. Select top length (box ■). HC/NW50-WB 1 3⁄ 8" 100N 316 3 150N 209 I = individual 60 = 60" length HC/NW75-WB 2 ⁄ 8" K = keyed-alike 3 150N 104 72 = 72" length HC/NW100-WB 3 ⁄ 8" M = master 96 = 96" length 1 200N 104 PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE HC/NW150-WB 5 ⁄ 4" 3. Select color(s) for housing and 2. Select top style (box ■). WS100-■-■ cabinet pedestal WS101-■-■ cabinet pedestal WS102-■-■ cabinet pedestal WS103-■-■ cabinet pedestal HC/NW300FFH-WB 11" 6" BASE L = Lista Top HC/MP50-WB 1 3⁄ 8" drawer fronts (see page 43 for S = Steel top HC/MP75-WB 2 3⁄ 8" color chart). PART NO. DRAWERS COMPARTS. P = Plastic top HC/MP100-WB 3 3⁄ 8" MP600-3-■ 4- M = Maple top HC/MP150-WB 5 1⁄ 4" EXAMPLE: to order an MP600-2A MP600-3A-■ 433 See page 73 for workbench top cabinet with an individual lock, and a descriptions. Hanging Cabinets INCLUDES INTERIOR Bright Blue cabinet housing and Pearl 150N 104 3. Select cabinets (where applica- These hanging cabinets are available either Gray drawers, the part number ble). See pages 42-43 for cabinet would be MP600-2A-I , and the paint with or without drawer interior sets. See 450 DOOR ordering information. column to far right for ordering instructions. color codes would be “BB” for the 4. Select color(s) for workbench BOTTOM SHELF housing and “PG” for the drawer components (see back cover for PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE 6" BASE WS200-■-■ cabinet pedestals WS201-■-■ cabinet pedestals WS202-■-■ cabinet pedestals WS203-■-■ cabinet pedestals DRAWER INTERIOR fronts. color chart). 75N 510 PART NO. DRAWERS COMPARTS. 100N 209 125N 104 MP600-19-■ 1- EXAMPLE: to order a WS101 work- MP600-19A -■ 14

bench with a 72" plastic top, and an 15 3⁄4" overall height NW600-2A-I cabinet pedestal with a PART NO. DRAWERS COMPARTS. DRAWER INTERIOR ■ 75N 028 Bright Blue cabinet housing and Pearl MP300-2- 3- 75N 316 MP300-2A-■ 323 100N 209 Gray drawers, the workbench part 150N 209 number would be WS101-72-P , 150N 104 200N 104 the cabinet part number would be DRAWER INTERIOR NW600-2A-I, and the paint color 100N 209 200N 104 codes would be “BB” for the work- PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DRAWERS COMPARTS. ■ ■ ■ ■ ■ ■ ■ bench components and cabinet hous- WB60- - optional hanging cabinet WB61-■-■ optional hanging cabinet WB62- - optional hanging cabinet WB63- - optional hanging cabinet MP750-2- 6- 3 MP750-2A -■ 670 ing, and “PG” for the drawer fronts. 15 ⁄4" overall height PART NO. DRAWERS COMPARTS. MP300-3-■ 2- INCLUDES INTERIOR 150N 104 MP300-3A-■ 213 600 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF

PART NO. DRAWERS COMPARTS. MP750-19-■ 1- PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE MP750-19A -■ 14 WS110-■-■ cabinet pedestal* WS111-■-■ cabinet pedestal* WS112-■-■ cabinet pedestal* WS113-■-■ cabinet pedestal* 80 *use MP600 housing without base *use MP600 housing without base *use MP600 housing without base *use MP600 housing without base 81 Industrial Easy-Order Workbench Combinations

All workbench tops have a standard Workbenches with No Above- Workbenches with Backstop and Workbenches with Stationary Workbenches with Adjustable Workbench Hanging Workbench Pedestals How to order Easy-Order Cabinets square edge and are 30" deep. Worksurface Accessories Endstops Riser Shelf Riser Shelf Cabinets The Easy-Order MP Width cabinets below are The 2 columns to the right of each Workbench components shown in gray Riser shelf includes backstop and full rear panel. Top and riser shelf include backstop. among our most popular as below-worksurface cabinet illustration indicate drawer in the illustrations do not come with Workbench includes endstops. Workbench includes endstops. storage for workbenches. All are 33 1⁄ 2" high heights and drawer interior sets. (For the workbench and must be ordered x 22 3⁄16" wide x 28 1⁄ 2" deep. See the drawer capacities and sizes, see page separately. To choose Easy-Order column to the right for ordering instructions. 11.) Below the illustration, you will cabinet pedestals, see page 12 for For additional choices of Easy-Order cabinet find part numbers, the number of Narrow Width cabinets and page 14 pedestals, see page 12 for Narrow Width cabi- drawers, and the number of drawer for MP Width cabinets, or see page nets and page 14 for MP Width cabinets. compartments created by the interior 81 for frequently ordered cabinet The cabinets below provide convenient below- sets (shown on page 15). worksurface storage where less than a full cabi- pedestals. For hanging cabinets, see DRAWER INTERIOR net pedestal is needed. 75N 510 1. Select Easy-Order Cabinet Combi- page 81. 75N 018 PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE 100N 316 nation either with or without Series WB5_ and WS10_ benches 150N 209 WB50-■-■ optional hanging cabinet WB51-■-■ optional hanging cabinet WB52-■-■ optional hanging cabinet WB53-■-■ optional hanging cabinet Single Drawer drawer interior sets. An “A” at have Lista Legs. The height of the legs 7 200N 104 stringer stringer stringer stringer All Narrow Width (NW) units are 16 ⁄8" the end of the part number (i.e., of WB5_ and WS10_ benches is 1 wide x 28 ⁄ 2" deep. All MP Width units are 6" BASE MP600-2A) designates that the 33 1⁄ 2". The height of the legs of 3 1 22 ⁄16" wide x 28 ⁄ 2" deep. Each unit cabinet comes with drawer inte- WB6_ and WS11_ benches is 35 1⁄ 2". is suspended from the workbench top, and PART NO. DRAWERS COMPARTS. MP600-2-■ 5- rior sets (shown on page 15). How to order an Industrial comes with an individual lock and 2 keys. MP600-2A -■ 557 2. Select lock type (box ■). For lock options see page 42. Easy-Order Workbench PART NO. DRAWER HEIGHT DRAWER INTERIOR N = none 1. Select top length (box ■). HC/NW50-WB 1 3⁄ 8" 100N 316 3 150N 209 I = individual 60 = 60" length HC/NW75-WB 2 ⁄ 8" K = keyed-alike 3 150N 104 72 = 72" length HC/NW100-WB 3 ⁄ 8" M = master 96 = 96" length 1 200N 104 PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE HC/NW150-WB 5 ⁄ 4" 3. Select color(s) for housing and 2. Select top style (box ■). WS100-■-■ cabinet pedestal WS101-■-■ cabinet pedestal WS102-■-■ cabinet pedestal WS103-■-■ cabinet pedestal HC/NW300FFH-WB 11" 6" BASE L = Lista Top HC/MP50-WB 1 3⁄ 8" drawer fronts (see page 43 for S = Steel top HC/MP75-WB 2 3⁄ 8" color chart). PART NO. DRAWERS COMPARTS. P = Plastic top HC/MP100-WB 3 3⁄ 8" MP600-3-■ 4- M = Maple top HC/MP150-WB 5 1⁄ 4" EXAMPLE: to order an MP600-2A MP600-3A-■ 433 See page 73 for workbench top cabinet with an individual lock, and a descriptions. Hanging Cabinets INCLUDES INTERIOR Bright Blue cabinet housing and Pearl 150N 104 3. Select cabinets (where applica- These hanging cabinets are available either Gray drawers, the part number ble). See pages 42-43 for cabinet would be MP600-2A-I , and the paint with or without drawer interior sets. See 450 DOOR ordering information. column to far right for ordering instructions. color codes would be “BB” for the 4. Select color(s) for workbench BOTTOM SHELF housing and “PG” for the drawer components (see back cover for PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE 6" BASE WS200-■-■ cabinet pedestals WS201-■-■ cabinet pedestals WS202-■-■ cabinet pedestals WS203-■-■ cabinet pedestals DRAWER INTERIOR fronts. color chart). 75N 510 PART NO. DRAWERS COMPARTS. 100N 209 125N 104 MP600-19-■ 1- EXAMPLE: to order a WS101 work- MP600-19A -■ 14

bench with a 72" plastic top, and an 15 3⁄4" overall height NW600-2A-I cabinet pedestal with a PART NO. DRAWERS COMPARTS. DRAWER INTERIOR ■ 75N 028 Bright Blue cabinet housing and Pearl MP300-2- 3- 75N 316 MP300-2A-■ 323 100N 209 Gray drawers, the workbench part 150N 209 number would be WS101-72-P , 150N 104 200N 104 the cabinet part number would be DRAWER INTERIOR NW600-2A-I, and the paint color 100N 209 200N 104 codes would be “BB” for the work- PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DRAWERS COMPARTS. ■ ■ ■ ■ ■ ■ ■ bench components and cabinet hous- WB60- - optional hanging cabinet WB61-■-■ optional hanging cabinet WB62- - optional hanging cabinet WB63- - optional hanging cabinet MP750-2- 6- 3 MP750-2A -■ 670 ing, and “PG” for the drawer fronts. 15 ⁄4" overall height PART NO. DRAWERS COMPARTS. MP300-3-■ 2- INCLUDES INTERIOR 150N 104 MP300-3A-■ 213 600 DOOR

ADJUSTABLE SHELF

BOTTOM SHELF

PART NO. DRAWERS COMPARTS. MP750-19-■ 1- PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE MP750-19A -■ 14 WS110-■-■ cabinet pedestal* WS111-■-■ cabinet pedestal* WS112-■-■ cabinet pedestal* WS113-■-■ cabinet pedestal* 80 *use MP600 housing without base *use MP600 housing without base *use MP600 housing without base *use MP600 housing without base 81 Technical Easy-Order Workbench Combinations

All workbench tops have a radius/ Workbenches with Backstop Workbenches with Adjustable Workbenches with Instrument Workbenches with 30" High Workbenches with 48" High bullnose front edge and are 30" deep. Riser Shelf Riser Shelf FlexWorks® Accessory System FlexWorks Accessory System Workbench components shown in gray Workbench and riser shelf include backstops. Workbench includes a backstop, a riser shelf Includes 30" starter frame, 30" adder frame, Includes 48" starter frame, 48" adder frame, in the illustrations do not come with backstop and a 15 amp, 6-outlet power strip. (2) 12" shelves, plastic box rail, backstop, (2) 12" shelves, (1) 15" shelf, backstop, the workbench and must be ordered Instrument risers are 16" high. Riser shelf is vertical power strip and markerboard/ horizontal power strip, markerboard/tackboard separately. To choose Easy-Order 12" deep. tackboard. and louvered panel. cabinet pedestals, see page 12 for Narrow Width cabinets and page 14 for MP Width cabinets, or see page ■ ■ 81 for frequently ordered cabinet ■ ■ ■ pedestals. For hanging cabinets, see ■ page 81. Series TWB01_ and TWB11_ benches

■ ■ ■ ■ ------have technical legs. Series TWB31_ ■ ■ ------■ ■ ------® ■ ■ ------■ ■ ■ ■ ■ ■ ■ ------■ ■ ■ ■ ■ ■ ■ benches include a Height-Right ■ ■ ------■ ■ ------electrically-powered base (see pages ------76-77 for further details). The height of the legs of TWB01_ and TWB11_ PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE TWB010-■-■ optional hanging cabinet TWB011-■-■ optional hanging cabinet TWB012-■-■ optional hanging cabinet benches is 33 1⁄ 2". How to order a Technical

Easy-Order Workbench ■ ■ PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE ■ ■ 1. Select top length (box ). ■ TWB013-■-■ optional hanging cabinet TWB213-■*-■ cabinet pedestals TWB014-■-■ optional hanging cabinet TWB214-■*-■ cabinet pedestals ■ 48 = 48" length ■ FlexWorks Accessory System is surface mounted FlexWorks Accessory System is surface mounted FlexWorks Accessory System is surface mounted FlexWorks Accessory System is surface mounted 60 = 60" length * 48" top not recommended * 48" top not recommended 72 = 72" length 2. Select top style (box ■). P = Plastic top M = Maple top E = ESD See page 73 for workbench top descriptions. PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE TWB110-■-■ cabinet pedestal TWB111-■-■ cabinet pedestal TWB112-■-■ cabinet pedestal 3. Select cabinets (where applica- ■ ■ ■ ■ ------■ ■ ------ble). See pages 42-43 for cabinet ■ ■ ------■ ■ ------■ ■ ■ ■ ■ ■ ■ ------■ ■ ■ ■ ■ ■ ■ ■ ■ ------ordering information. ■ ■ ------■ ------4. Select color(s) for workbench ■ ■ ■ components (see back cover for ■ ■ color chart).

EXAMPLE: to order a TWB111work- bench with a 72" plastic top, and an NW600-2A-I cabinet pedestal with a PART NO. DOES NOT INCLUDE PART NO. PART NO. DOES NOT INCLUDE PART NO. ■ ■ ■ ■ ■ ■ ■ ■ Bright Blue cabinet housing and Pearl TWB113- - cabinet pedestal TWB313- - TWB114- - cabinet pedestal TWB314- - Gray drawers, the workbench part FlexWorks Accessory System is surface mounted FlexWorks Accessory System is rear mounted FlexWorks Accessory System is surface mounted FlexWorks Accessory System is rear mounted PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE features Height-Right ® adjustable base features Height-Right adjustable base number would be TWB111-72-P , TWB210-■*-■ cabinet pedestals TWB211-■*-■ cabinet pedestals TWB212-■*-■ cabinet pedestals the cabinet part number would be * 48" top not recommended * 48" top not recommended * 48" top not recommended NW600-2A-I, and the paint color codes would be “BB” for the work- ■ ■ bench components and cabinet hous- ■ ■ ■ ing, and “PG” for the drawer fronts. ■

PART NO. PART NO. PART NO. TWB310-■-■ TWB311-■-■ TWB312-■-■ features Height-Right adjustable base features Height-Right adjustable base features Height-Right adjustable base 82 83 Technical Easy-Order Workbench Combinations

All workbench tops have a radius/ Workbenches with Backstop Workbenches with Adjustable Workbenches with Instrument Workbenches with 30" High Workbenches with 48" High bullnose front edge and are 30" deep. Riser Shelf Riser Shelf FlexWorks® Accessory System FlexWorks Accessory System Workbench components shown in gray Workbench and riser shelf include backstops. Workbench includes a backstop, a riser shelf Includes 30" starter frame, 30" adder frame, Includes 48" starter frame, 48" adder frame, in the illustrations do not come with backstop and a 15 amp, 6-outlet power strip. (2) 12" shelves, plastic box rail, backstop, (2) 12" shelves, (1) 15" shelf, backstop, the workbench and must be ordered Instrument risers are 16" high. Riser shelf is vertical power strip and markerboard/ horizontal power strip, markerboard/tackboard separately. To choose Easy-Order 12" deep. tackboard. and louvered panel. cabinet pedestals, see page 12 for Narrow Width cabinets and page 14 for MP Width cabinets, or see page ■ ■ 81 for frequently ordered cabinet ■ ■ ■ pedestals. For hanging cabinets, see ■ page 81. Series TWB01_ and TWB11_ benches

■ ■ ■ ■ ------have technical legs. Series TWB31_ ■ ■ ------■ ■ ------® ■ ■ ------■ ■ ■ ■ ■ ■ ■ ------■ ■ ■ ■ ■ ■ ■ benches include a Height-Right ■ ■ ------■ ■ ------electrically-powered base (see pages ------76-77 for further details). The height of the legs of TWB01_ and TWB11_ PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE TWB010-■-■ optional hanging cabinet TWB011-■-■ optional hanging cabinet TWB012-■-■ optional hanging cabinet benches is 33 1⁄ 2". How to order a Technical

Easy-Order Workbench ■ ■ PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE ■ ■ 1. Select top length (box ). ■ TWB013-■-■ optional hanging cabinet TWB213-■*-■ cabinet pedestals TWB014-■-■ optional hanging cabinet TWB214-■*-■ cabinet pedestals ■ 48 = 48" length ■ FlexWorks Accessory System is surface mounted FlexWorks Accessory System is surface mounted FlexWorks Accessory System is surface mounted FlexWorks Accessory System is surface mounted 60 = 60" length * 48" top not recommended * 48" top not recommended 72 = 72" length 2. Select top style (box ■). P = Plastic top M = Maple top E = ESD See page 73 for workbench top descriptions. PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE TWB110-■-■ cabinet pedestal TWB111-■-■ cabinet pedestal TWB112-■-■ cabinet pedestal 3. Select cabinets (where applica- ■ ■ ■ ■ ------■ ■ ------ble). See pages 42-43 for cabinet ■ ■ ------■ ■ ------■ ■ ■ ■ ■ ■ ■ ------■ ■ ■ ■ ■ ■ ■ ■ ■ ------ordering information. ■ ■ ------■ ------4. Select color(s) for workbench ■ ■ ■ components (see back cover for ■ ■ color chart).

EXAMPLE: to order a TWB111work- bench with a 72" plastic top, and an NW600-2A-I cabinet pedestal with a PART NO. DOES NOT INCLUDE PART NO. PART NO. DOES NOT INCLUDE PART NO. ■ ■ ■ ■ ■ ■ ■ ■ Bright Blue cabinet housing and Pearl TWB113- - cabinet pedestal TWB313- - TWB114- - cabinet pedestal TWB314- - Gray drawers, the workbench part FlexWorks Accessory System is surface mounted FlexWorks Accessory System is rear mounted FlexWorks Accessory System is surface mounted FlexWorks Accessory System is rear mounted PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE PART NO. DOES NOT INCLUDE features Height-Right ® adjustable base features Height-Right adjustable base number would be TWB111-72-P , TWB210-■*-■ cabinet pedestals TWB211-■*-■ cabinet pedestals TWB212-■*-■ cabinet pedestals the cabinet part number would be * 48" top not recommended * 48" top not recommended * 48" top not recommended NW600-2A-I, and the paint color codes would be “BB” for the work- ■ ■ bench components and cabinet hous- ■ ■ ■ ing, and “PG” for the drawer fronts. ■

PART NO. PART NO. PART NO. TWB310-■-■ TWB311-■-■ TWB312-■-■ features Height-Right adjustable base features Height-Right adjustable base features Height-Right adjustable base 82 83 FlexWorks ® Accessory System FlexWorks ® Frames

Lista’s FlexWorks Accessory be adapted or expanded to meet ➤ STARTER SECTION WIDTH ➤ ➤ ADDER SECTION WIDTH ➤ Frames System is highly functional and changing needs. It can also be FlexWorks starter frames consist of 2 upright posts and a universal top rail. Adder sets con- flexible. It has been designed to retrofitted to any existing Lista sist of an additional upright and the top rail. cost-effectively meet the needs of workbench or other manufacturer’s Frames are sturdy, heavy gauge steel, and are notched front and back at 1" increments for a broad variety of jobs. workbench. Some FlexWorks com- mounting shelves and accessories. Frames also The System has been ergonomi- ponents can be easily adjusted for feature threaded side holes at 4" increments for system accessories. cally designed, providing for easy specific tasks within a workshift. A 48" high upright is required for benches with accessibility with no stretch or System width is limited only by light fixtures and other overhead accessories. strain, reducing the risk of injury your bench length. A 30" height is standard when no overhead accessories are required. and increasing productivity. All components are available in Like all Lista storage compo- ESD paint for static sensitive appli- 30" High Frame Starter Sets PART NO. SEC. WIDTH CENT.-TO-CENT. STARTER SECTION ADDER SECTION nents, the FlexWorks Accessory cations. Standard colors are shown WF2130 21 1⁄4" WF2730 27 1⁄4" System is modular and allows for on the back cover. WF3330 33 1⁄4" 1 easy reconfiguration. It can easily Available Widths of FlexWorks Systems WF3930 39 ⁄4" WF4530 45 1⁄4" The widths below represent measurements from frame center to frame center. Center 7 3 posts are 1 /8" wide. Inside usable width between posts for 27 length frames is 25 /8", 30" High Frame Adder Sets 3 and for 33 length frames is 31 /8". PART NO. SEC. WIDTH CENT.-TO-CENT. WF2130A 21 1⁄4" Using 1 Section WF2730A 27 1⁄4" Overhead light fixture 1 SECTION WIDTH OVERALL WIDTH MINIMUM BENCH TOP LENGTH WF3330A 33 ⁄4" 1 Tool rail (CENTER-TO-CENTER) (FOOT-TO-FOOT) WF3930A 39 ⁄4" 1 3 3 1 21 /4" 24 /4" 26 /4" WF4530A 45 ⁄4" 1 3 3 27 /4" 30 /4" 32 /4" 1 3 3 33 /4" 36 /4" 38 /4" 48" High Frame Starter Sets Reversible markerboard/tackboard 1 3 3 39 /4" 42 /4" 44 /4"" PART NO. SEC. WIDTH CENT.-TO-CENT. 1 3 3 45 /4" 48 /4" 50 /4" WF2148 21 1⁄4" Adjustable shelf WF2748 27 1⁄4" Using 1 Starter and 1 Adder Section WF3348 33 1⁄4" with shelf dividers 1 SECTION WIDTH OVERALL WIDTH MINIMUM BENCH TOP LENGTH WF3948 39 ⁄4" 1 (CENTER-TO-CENTER) (FOOT-TO-FOOT) WF4548 45 ⁄4" 1 1 21 /4" + 21 /4" 46" 48" 1 1 21 /4" + 27 /4" 52" 54" 48" High Frame Adder Sets 1 1 21 /4" + 33 /4" 58" 60" PART NO. SEC. WIDTH CENT.-TO-CENT. 1 1 21 /4" + 39 /4" 64" 66" WF2148A 21 1⁄4" Monitor shelf 1 1 21 /4" + 45 /4" 70" 72" WF2748A 27 1⁄4" 1 1 Louvered panel 27 /4" + 27 /4" 58" 60" WF3348A 33 1⁄4" 1 1 27 /4" + 33 /4" 64" 66" WF3948A 39 1⁄4" Horizontal power rail 1 1 27 /4" + 39 /4" 70" 72" WF4548A 45 1⁄4" 1 1 Large document holder 27 /4" + 45 /4" 76" 78" 1 1 33 /4" + 33 /4" 70" 72" 1 1 33 /4" + 39 /4" 76" 78" 1 1 33 /4" + 45 /4" 82" 84" 1 1 39 /4" + 39 /4" 82" 84" 1 1 39 /4" + 45 /4" 88" 90" 1 1 45 /4" + 45 /4" 94" 96"

84 85 FlexWorks ® Accessory System FlexWorks ® Frames

Lista’s FlexWorks Accessory be adapted or expanded to meet ➤ STARTER SECTION WIDTH ➤ ➤ ADDER SECTION WIDTH ➤ Frames System is highly functional and changing needs. It can also be FlexWorks starter frames consist of 2 upright posts and a universal top rail. Adder sets con- flexible. It has been designed to retrofitted to any existing Lista sist of an additional upright and the top rail. cost-effectively meet the needs of workbench or other manufacturer’s Frames are sturdy, heavy gauge steel, and are notched front and back at 1" increments for a broad variety of jobs. workbench. Some FlexWorks com- mounting shelves and accessories. Frames also The System has been ergonomi- ponents can be easily adjusted for feature threaded side holes at 4" increments for system accessories. cally designed, providing for easy specific tasks within a workshift. A 48" high upright is required for benches with accessibility with no stretch or System width is limited only by light fixtures and other overhead accessories. strain, reducing the risk of injury your bench length. A 30" height is standard when no overhead accessories are required. and increasing productivity. All components are available in Like all Lista storage compo- ESD paint for static sensitive appli- 30" High Frame Starter Sets PART NO. SEC. WIDTH CENT.-TO-CENT. STARTER SECTION ADDER SECTION nents, the FlexWorks Accessory cations. Standard colors are shown WF2130 21 1⁄4" WF2730 27 1⁄4" System is modular and allows for on the back cover. WF3330 33 1⁄4" 1 easy reconfiguration. It can easily Available Widths of FlexWorks Systems WF3930 39 ⁄4" WF4530 45 1⁄4" The widths below represent measurements from frame center to frame center. Center 7 3 posts are 1 /8" wide. Inside usable width between posts for 27 length frames is 25 /8", 30" High Frame Adder Sets 3 and for 33 length frames is 31 /8". PART NO. SEC. WIDTH CENT.-TO-CENT. WF2130A 21 1⁄4" Using 1 Section WF2730A 27 1⁄4" Overhead light fixture 1 SECTION WIDTH OVERALL WIDTH MINIMUM BENCH TOP LENGTH WF3330A 33 ⁄4" 1 Tool rail (CENTER-TO-CENTER) (FOOT-TO-FOOT) WF3930A 39 ⁄4" 1 3 3 1 21 /4" 24 /4" 26 /4" WF4530A 45 ⁄4" 1 3 3 27 /4" 30 /4" 32 /4" 1 3 3 33 /4" 36 /4" 38 /4" 48" High Frame Starter Sets Reversible markerboard/tackboard 1 3 3 39 /4" 42 /4" 44 /4"" PART NO. SEC. WIDTH CENT.-TO-CENT. 1 3 3 45 /4" 48 /4" 50 /4" WF2148 21 1⁄4" Adjustable shelf WF2748 27 1⁄4" Using 1 Starter and 1 Adder Section WF3348 33 1⁄4" with shelf dividers 1 SECTION WIDTH OVERALL WIDTH MINIMUM BENCH TOP LENGTH WF3948 39 ⁄4" 1 (CENTER-TO-CENTER) (FOOT-TO-FOOT) WF4548 45 ⁄4" 1 1 21 /4" + 21 /4" 46" 48" 1 1 21 /4" + 27 /4" 52" 54" 48" High Frame Adder Sets 1 1 21 /4" + 33 /4" 58" 60" PART NO. SEC. WIDTH CENT.-TO-CENT. 1 1 21 /4" + 39 /4" 64" 66" WF2148A 21 1⁄4" Monitor shelf 1 1 21 /4" + 45 /4" 70" 72" WF2748A 27 1⁄4" 1 1 Louvered panel 27 /4" + 27 /4" 58" 60" WF3348A 33 1⁄4" 1 1 27 /4" + 33 /4" 64" 66" WF3948A 39 1⁄4" Horizontal power rail 1 1 27 /4" + 39 /4" 70" 72" WF4548A 45 1⁄4" 1 1 Large document holder 27 /4" + 45 /4" 76" 78" 1 1 33 /4" + 33 /4" 70" 72" 1 1 33 /4" + 39 /4" 76" 78" 1 1 33 /4" + 45 /4" 82" 84" 1 1 39 /4" + 39 /4" 82" 84" 1 1 39 /4" + 45 /4" 88" 90" 1 1 45 /4" + 45 /4" 94" 96"

84 85 FlexWorks ® Accessory Shelves and Plastic Box Rails FlexWorks ® Accessory Overhead Lights, Tool Rails and Power Strips

Shelves, plastic box rails, Vertical Power Strips markerboard/tackboards, utility Mounts vertically to either inside or outside of upright. Bracket and rails, tool rails, backstops, over- hardware supplied. Available in head cabinets and back panels must 15 amp or 20 amp, and GFCI. Lighted on/off switch, 6' cord match the width of your chosen with grounded plug and circuit Adjustable Shelves PART NO. WIDTH DESCRIPTION frame (see pages 86-89). The first Variable Angle Shelves Overhead Light Fixtures breaker are standard. Adjustable, heavy gauge steel shelves can be Center mounting shelf is 18" deep, and is 48" long 3-tube fluorescent fixture tilts up or OHL/48 48" light only OHL/48-1 48" for FlexWorks 22" to 48" 2 digits in the part numbers of mounted parallel to the benchtop or at a 15° mounted between uprights. The shelf adjusts down 15°. Brackets allow light fixture to be PART NO. DESCRIPTION Plastic Box Rails OHL/48-2 48" for FlexWorks 49" to 90" angle for easy, ergonomic access. Shelves are from totally flat to a 15° angle and has a EOP15-15/KIT 15 amp with 6 outlets these accessories describe the sec- The plastic box rail is easily adjustable for mounted to frames 22" to 90" wide. Includes OHL/TR-BRK pair of support brackets EOP15-20/KIT 20 amp with 6 outlets reversible, with the lip either at the front, or at capacity of 150 lbs. Includes ribbed mat. ergonomic access. It can be mounted parallel switch and 8' grounded electrical cord. EOP15-GF/KIT 15 amp GFCI with 6 outlets tion width. the rear to act as a backstop. Requires support brackets. PART NO. USE WITH SECTION WIDTH to your benchtop or at a 15° angle. The PB EXAMPLE: plastic box rail WR33 Attaching the shelves requires no special tools, WS2118A 21 1⁄4" Rail is attached via the same simple double- WS2718A 27 1⁄4" notch system as adjustable shelves. It can hold so they can easily be switched from shift to 1 should be used with a frame that WS3318A 33 ⁄4" selected Lista or other boxes that have hanger shift and task to task. Supports are attached WS3918A 39 1⁄4" lips at the rear for attaching to a louvered has a 33 1⁄4" section width. through a simple double-notch system (support WS4518A 45 1⁄4" brackets insert into slots on the uprights). panel. Plastic boxes are found on page 119. Horizontal Power/Utility Rails PART NO. WIDTH MAXIMUM # OF PART NO. SHELF WIDTH SHELF DEPTH Self-contained, 6-plug electrical outlet strip WS2112 21 1⁄4"12" 3" BOXES/RAIL 1 with 6' cord, mounts into holes on insides of WS2712 27 1⁄4"12" WR21 21 ⁄4"7 1 WS3312 33 1⁄4"12" WR27 27 ⁄4"9 uprights. Power rail pivots on axis, providing 1 WS3912 39 1⁄4"12" WR33 33 ⁄4"11 full horizontal adjustability. 110V, 15 amp WR39 39 1⁄4"13 WS4512 45 1⁄4"12" Tool Rails Support Brackets circuit breaker, UL and CSA approved. Contact WR45 45 1⁄4"15 WS2115 21 1⁄4"15" The tool rail spans the length of the benchtop. A pair of support brackets is required for mount- Lista for other power options. WS2715 27 1⁄4"15" It is available in 48", 60" or 72" lengths. ing overhead light and tool rail. Brackets can WS3315 33 1⁄4"15" PART NO. SECTION WIDTH 1 Shelf Dividers Each tool rail has a 30 lb. capacity, and comes support both light and up to 2 tool rails. WS3915 39 ⁄4"15" WU21P 21 1⁄4" 1 Steel dividers fit over the edge of adjustable complete with a trolley, 2 hangers, 2 endstops WS4515 45 ⁄4"15" WU27P 27 1⁄4" shelf when shelf is mounted parallel and the lip and 2 end caps in black finish. Balancer not PART NO. DESCRIPTION OHL/TR-BRK pair of support brackets WU33P 33 1⁄4" is in the back. Painted to match shelf. included. Requires support brackets. WU39P 39 1⁄4" WU45P 45 1⁄4" PART NO. HEIGHT PART NO. LENGTH WSVSD100/12-L 4" TR48 48" WSVSD100/12-R 4" TR60 60" Airhose WSVSD150/12-L 6" TR72 72" Attachment Ribbed Shelf Mats WSVSD150/12-R 6" Small bracket bolts to Ribbed mats provide added protection for tools WSVSD200/12-L 8" inside or outside of upright. WSVSD200/12-R 8" and instruments. Quick-connect fitting not WSVSD100/15-L 4" Swing Arm Tool Rail WSVSD100/15-R 4" supplied. PART NO. USE WITH SHELF PART NO. The swing arm tool rail is available in one 36" WSVSD150/15-L 6" RMAT-WS2112 WS2112 length and swings 180°. It has a 30 lb. capa- WSVSD150/15-R 6" PART NO. DESCRIPTION RMAT-WS2115 WS2115 WSVSD200/15-L 8" city and includes a trolley, 1 endstop and BKA bracket for air supply RMAT-WS2118 WS2118 WSVSD200/15-R 8" 1 end cap. Balancer not included. Does not RMAT-WS2712 WS2712 RMAT-WS2715 WS2715 require support bracket. RMAT-WS2718 WS2718 PART NO. LENGTH RMAT-WS3312 WS3312 SWT36 36" RMAT-WS3315 WS3315 RMAT-WS3912 WS3912 RMAT-WS3915 WS3915 RMAT-WS4512 WS4512 RMAT-WS4515 WS4515 RMAT-WS4518 WS4518

86 87 FlexWorks ® Accessory Shelves and Plastic Box Rails FlexWorks ® Accessory Overhead Lights, Tool Rails and Power Strips

Shelves, plastic box rails, Vertical Power Strips markerboard/tackboards, utility Mounts vertically to either inside or outside of upright. Bracket and rails, tool rails, backstops, over- hardware supplied. Available in head cabinets and back panels must 15 amp or 20 amp, and GFCI. Lighted on/off switch, 6' cord match the width of your chosen with grounded plug and circuit Adjustable Shelves PART NO. WIDTH DESCRIPTION frame (see pages 86-89). The first Variable Angle Shelves Overhead Light Fixtures breaker are standard. Adjustable, heavy gauge steel shelves can be Center mounting shelf is 18" deep, and is 48" long 3-tube fluorescent fixture tilts up or OHL/48 48" light only OHL/48-1 48" for FlexWorks 22" to 48" 2 digits in the part numbers of mounted parallel to the benchtop or at a 15° mounted between uprights. The shelf adjusts down 15°. Brackets allow light fixture to be PART NO. DESCRIPTION Plastic Box Rails OHL/48-2 48" for FlexWorks 49" to 90" angle for easy, ergonomic access. Shelves are from totally flat to a 15° angle and has a EOP15-15/KIT 15 amp with 6 outlets these accessories describe the sec- The plastic box rail is easily adjustable for mounted to frames 22" to 90" wide. Includes OHL/TR-BRK pair of support brackets EOP15-20/KIT 20 amp with 6 outlets reversible, with the lip either at the front, or at capacity of 150 lbs. Includes ribbed mat. ergonomic access. It can be mounted parallel switch and 8' grounded electrical cord. EOP15-GF/KIT 15 amp GFCI with 6 outlets tion width. the rear to act as a backstop. Requires support brackets. PART NO. USE WITH SECTION WIDTH to your benchtop or at a 15° angle. The PB EXAMPLE: plastic box rail WR33 Attaching the shelves requires no special tools, WS2118A 21 1⁄4" Rail is attached via the same simple double- WS2718A 27 1⁄4" notch system as adjustable shelves. It can hold so they can easily be switched from shift to 1 should be used with a frame that WS3318A 33 ⁄4" selected Lista or other boxes that have hanger shift and task to task. Supports are attached WS3918A 39 1⁄4" lips at the rear for attaching to a louvered has a 33 1⁄4" section width. through a simple double-notch system (support WS4518A 45 1⁄4" brackets insert into slots on the uprights). panel. Plastic boxes are found on page 119. Horizontal Power/Utility Rails PART NO. WIDTH MAXIMUM # OF PART NO. SHELF WIDTH SHELF DEPTH Self-contained, 6-plug electrical outlet strip WS2112 21 1⁄4"12" 3" BOXES/RAIL 1 with 6' cord, mounts into holes on insides of WS2712 27 1⁄4"12" WR21 21 ⁄4"7 1 WS3312 33 1⁄4"12" WR27 27 ⁄4"9 uprights. Power rail pivots on axis, providing 1 WS3912 39 1⁄4"12" WR33 33 ⁄4"11 full horizontal adjustability. 110V, 15 amp WR39 39 1⁄4"13 WS4512 45 1⁄4"12" Tool Rails Support Brackets circuit breaker, UL and CSA approved. Contact WR45 45 1⁄4"15 WS2115 21 1⁄4"15" The tool rail spans the length of the benchtop. A pair of support brackets is required for mount- Lista for other power options. WS2715 27 1⁄4"15" It is available in 48", 60" or 72" lengths. ing overhead light and tool rail. Brackets can WS3315 33 1⁄4"15" PART NO. SECTION WIDTH 1 Shelf Dividers Each tool rail has a 30 lb. capacity, and comes support both light and up to 2 tool rails. WS3915 39 ⁄4"15" WU21P 21 1⁄4" 1 Steel dividers fit over the edge of adjustable complete with a trolley, 2 hangers, 2 endstops WS4515 45 ⁄4"15" WU27P 27 1⁄4" shelf when shelf is mounted parallel and the lip and 2 end caps in black finish. Balancer not PART NO. DESCRIPTION OHL/TR-BRK pair of support brackets WU33P 33 1⁄4" is in the back. Painted to match shelf. included. Requires support brackets. WU39P 39 1⁄4" WU45P 45 1⁄4" PART NO. HEIGHT PART NO. LENGTH WSVSD100/12-L 4" TR48 48" WSVSD100/12-R 4" TR60 60" Airhose WSVSD150/12-L 6" TR72 72" Attachment Ribbed Shelf Mats WSVSD150/12-R 6" Small bracket bolts to Ribbed mats provide added protection for tools WSVSD200/12-L 8" inside or outside of upright. WSVSD200/12-R 8" and instruments. Quick-connect fitting not WSVSD100/15-L 4" Swing Arm Tool Rail WSVSD100/15-R 4" supplied. PART NO. USE WITH SHELF PART NO. The swing arm tool rail is available in one 36" WSVSD150/15-L 6" RMAT-WS2112 WS2112 length and swings 180°. It has a 30 lb. capa- WSVSD150/15-R 6" PART NO. DESCRIPTION RMAT-WS2115 WS2115 WSVSD200/15-L 8" city and includes a trolley, 1 endstop and BKA bracket for air supply RMAT-WS2118 WS2118 WSVSD200/15-R 8" 1 end cap. Balancer not included. Does not RMAT-WS2712 WS2712 RMAT-WS2715 WS2715 require support bracket. RMAT-WS2718 WS2718 PART NO. LENGTH RMAT-WS3312 WS3312 SWT36 36" RMAT-WS3315 WS3315 RMAT-WS3912 WS3912 RMAT-WS3915 WS3915 RMAT-WS4512 WS4512 RMAT-WS4515 WS4515 RMAT-WS4518 WS4518

86 87 FlexWorks ® System Pivoting Accessories, Backstops and Markerboards FlexWorks ® System Overhead Cabinets and Back Panels

Overhead Cabinets Back Panels 1 16 /4" high x 15" deep Sturdy steel panels easily attach between PART NO. WIDTH uprights. All panels are available in heights of ■ ■ OHC2116- - 21" 12", 18" and 30". OHC2716-■-■ 27" ■ ■ OHC3316- - 33" To order panels, the height of the panel OHC3916-■-■ 39" (“12”, “18” or “30”) must be written in OHC4516-■-■ 45" place of the red box in the part number. The 29" high x 15" deep Monitor Shelves Document Holders combined height of the panels cannot exceed Pegboard Panels Overhead Cabinets and PART NO. WIDTH the section height. Pegboard panel accepts all standard pegging Arm swings 180° for easy ergonomic access, Arm swings 180° for easy ergonomic access, OHC2129-■-■ 21" Accessories ■ ■ devices (i.e. hooks, etc.). Ideal for placement and bolts to the inside or outside of an upright. and bolts to the inside or outside of an upright. OHC2729- - 27" EXAMPLE: to order a pegboard panel that Lista overhead cabinets can attach to a OHC3329-■-■ 33" of commonly used tools. Stiffener (included) is For working with computer equipment. For displaying papers, plans, etc. fits a 27 1⁄4" long and 18" high section, the FlexWorks frame for above-worksurface stor- OHC3929-■-■ 39" required for 18" and 30" panels. ■ ■ part number is WPP2718. PART NO. DESCRIPTION CAPACITY PART NO. DESCRIPTION CAPACITY age. Cabinets easily mount to FlexWorks OHC4529- - 45" WMS right mount 50 lb. WDH right mount 15 lb. PART NO. USE WITH SECTION WIDTH frame with mounting rails. Cabinets come ■ 1 WMS-L left mount 50 lb. WDH-L left mount 15 lb. Overhead Cabinet FlexWorks WPP21 21 ⁄4" without doors (to order overhead cabinet with- WPP27 ■ 27 1⁄4" out doors, use part number in chart to right), Mounting Rails WPP33 ■ 33 1⁄4" or can be ordered with door(s) as shown PART NO. USE WITH SECTION WIDTH WPP39 ■ 39 1⁄4" OHC-FWB21 21 1⁄4" ■ 1 Reversible below. For descriptions of overhead cabinets, WPP45 45 ⁄4" OHC-FWB27 27 1⁄4" Markerboards/Tackboards see page 105. OHC-FWB33 33 1⁄4" Two-sided reversible board. Features white OHC-FWB39 39 1⁄4" Solid Privacy Panels magnetic markerboard on 1 side and gray How to order a FlexWorks OHC-FWB45 45 1⁄4" Privacy panel encloses a section and can also fabric tackboard on the other. Easily attaches overhead cabinet with door be used to hold/display items with magnets. to L-shaped channel which bolts to uprights. 1. Select cabinet that matches the section Overhead Cabinet Additional Louvered Back Panels PART NO. USE WITH SECTION WIDTH Also functions as privacy panel and sound width you have chosen. Shelves (For 29" High Cabinets) WSP21 ■ 21 1⁄4" Louvered panel is designed to accommodate ■ 1 Large Document Holders dampener. 30" high. 2. Select door (box ■). 13 1⁄ 2" deep WSP27 27 ⁄4" ■ 1 Arm swings 180° for easy ergonomic access, PART NO. FOR USE WITH industry-standard plastic boxes that feature WSP33 33 ⁄4" PART NO. USE WITH SECTION WIDTH Door(s) for 29" high overhead cabinets ■ 1 and bolts to the inside or outside of an upright. OHC-S21 21" cabinet louvered edge or lip. Stiffener (included) is WSP39 39 ⁄4" RV21 21 1⁄4" HD = hinged doors ■ 1 Accessory Shelves OHC-S27 27" cabinet required for 18" and 30" panels. WSP45 45 ⁄4" For displaying large documents, and open RV27 27 1⁄4" HDP = hinged doors with steel-framed Arm swings 180° for easy ergonomic access, OHC-S33 33" cabinet binders and books. RV33 33 1⁄4" plexiglas* OHC-S39 39" cabinet PART NO. USE WITH SECTION WIDTH and bolts to the inside or outside of an upright. 1 SD = sliding doors RV39 39 ⁄4" ■ 1 SDP = sliding doors with steel-framed OHC-S45 45" cabinet WLP21 21 ⁄4" For easy access to small tools, instruments, PART NO. DESCRIPTION CAPACITY RV45 45 1⁄4" plexiglas* WLP27 ■ 27 1⁄4" WDHW right mount 15 lb. parts, etc. Ribbed mat included. 1 WLP33 ■ 33 1⁄4" Door(s) for 16 /4" high overhead WDHW-L left mount 15 lb. Overhead Cabinet Canopy Tops ■ 1 Markerboard Tray cabinets WLP39 39 ⁄4" PART NO. DESCRIPTION CAPACITY PART NO. USE WITH SECTION WIDTH ■ 1 RD = retractable door WLP45 45 ⁄4" WAS right mount 15 lb. Optional magnetic tray for holding markers or OHC-C21 21 1⁄4" WAS-L left mount 15 lb. erasers. Fastens magnetically to markerboard. * plexiglas doors available for cabinets 27" and OHC-C27 27 1⁄4" wider only OHC-C33 33 1⁄4" PART NO. DESCRIPTION 3. Select lock type (box ■). OHC-C39 39 1⁄4" MBT 18" long tray I = individual OHC-C45 45 1⁄4" Backstops K = keyed-alike M = master Prevents items from rolling off workbench. * for lock options, see page 42 3" in height. Available in 5 standard widths 4. Select mounting rail that matches the (21", 27", 33", 39" and 45") which corre- section width you have chosen. spond to section widths. Painted to match frame. 5. Select cabinet color (see page 43 for color chart). PART NO. USE WITH SECTION WIDTH WBS21 21 1⁄4" EXAMPLE: to order a Bright Blue OHC2716 1 WBS27 27 ⁄4" overhead cabinet with a retractable door and WBS33 33 1⁄4" an individual lock, the part number would be WBS39 39 1⁄4" WBS45 45 1⁄4" OHC2716-RD-I , the mounting rail would be OHC-FWB27 and the paint color code would be “BB.”

88 89 FlexWorks ® System Pivoting Accessories, Backstops and Markerboards FlexWorks ® System Overhead Cabinets and Back Panels

Overhead Cabinets Back Panels 1 16 /4" high x 15" deep Sturdy steel panels easily attach between PART NO. WIDTH uprights. All panels are available in heights of ■ ■ OHC2116- - 21" 12", 18" and 30". OHC2716-■-■ 27" ■ ■ OHC3316- - 33" To order panels, the height of the panel OHC3916-■-■ 39" (“12”, “18” or “30”) must be written in OHC4516-■-■ 45" place of the red box in the part number. The 29" high x 15" deep Monitor Shelves Document Holders combined height of the panels cannot exceed Pegboard Panels Overhead Cabinets and PART NO. WIDTH the section height. Pegboard panel accepts all standard pegging Arm swings 180° for easy ergonomic access, Arm swings 180° for easy ergonomic access, OHC2129-■-■ 21" Accessories ■ ■ devices (i.e. hooks, etc.). Ideal for placement and bolts to the inside or outside of an upright. and bolts to the inside or outside of an upright. OHC2729- - 27" EXAMPLE: to order a pegboard panel that Lista overhead cabinets can attach to a OHC3329-■-■ 33" of commonly used tools. Stiffener (included) is For working with computer equipment. For displaying papers, plans, etc. fits a 27 1⁄4" long and 18" high section, the FlexWorks frame for above-worksurface stor- OHC3929-■-■ 39" required for 18" and 30" panels. ■ ■ part number is WPP2718. PART NO. DESCRIPTION CAPACITY PART NO. DESCRIPTION CAPACITY age. Cabinets easily mount to FlexWorks OHC4529- - 45" WMS right mount 50 lb. WDH right mount 15 lb. PART NO. USE WITH SECTION WIDTH frame with mounting rails. Cabinets come ■ 1 WMS-L left mount 50 lb. WDH-L left mount 15 lb. Overhead Cabinet FlexWorks WPP21 21 ⁄4" without doors (to order overhead cabinet with- WPP27 ■ 27 1⁄4" out doors, use part number in chart to right), Mounting Rails WPP33 ■ 33 1⁄4" or can be ordered with door(s) as shown PART NO. USE WITH SECTION WIDTH WPP39 ■ 39 1⁄4" OHC-FWB21 21 1⁄4" ■ 1 Reversible below. For descriptions of overhead cabinets, WPP45 45 ⁄4" OHC-FWB27 27 1⁄4" Markerboards/Tackboards see page 105. OHC-FWB33 33 1⁄4" Two-sided reversible board. Features white OHC-FWB39 39 1⁄4" Solid Privacy Panels magnetic markerboard on 1 side and gray How to order a FlexWorks OHC-FWB45 45 1⁄4" Privacy panel encloses a section and can also fabric tackboard on the other. Easily attaches overhead cabinet with door be used to hold/display items with magnets. to L-shaped channel which bolts to uprights. 1. Select cabinet that matches the section Overhead Cabinet Additional Louvered Back Panels PART NO. USE WITH SECTION WIDTH Also functions as privacy panel and sound width you have chosen. Shelves (For 29" High Cabinets) WSP21 ■ 21 1⁄4" Louvered panel is designed to accommodate ■ 1 Large Document Holders dampener. 30" high. 2. Select door (box ■). 13 1⁄ 2" deep WSP27 27 ⁄4" ■ 1 Arm swings 180° for easy ergonomic access, PART NO. FOR USE WITH industry-standard plastic boxes that feature WSP33 33 ⁄4" PART NO. USE WITH SECTION WIDTH Door(s) for 29" high overhead cabinets ■ 1 and bolts to the inside or outside of an upright. OHC-S21 21" cabinet louvered edge or lip. Stiffener (included) is WSP39 39 ⁄4" RV21 21 1⁄4" HD = hinged doors ■ 1 Accessory Shelves OHC-S27 27" cabinet required for 18" and 30" panels. WSP45 45 ⁄4" For displaying large documents, and open RV27 27 1⁄4" HDP = hinged doors with steel-framed Arm swings 180° for easy ergonomic access, OHC-S33 33" cabinet binders and books. RV33 33 1⁄4" plexiglas* OHC-S39 39" cabinet PART NO. USE WITH SECTION WIDTH and bolts to the inside or outside of an upright. 1 SD = sliding doors RV39 39 ⁄4" ■ 1 SDP = sliding doors with steel-framed OHC-S45 45" cabinet WLP21 21 ⁄4" For easy access to small tools, instruments, PART NO. DESCRIPTION CAPACITY RV45 45 1⁄4" plexiglas* WLP27 ■ 27 1⁄4" WDHW right mount 15 lb. parts, etc. Ribbed mat included. 1 WLP33 ■ 33 1⁄4" Door(s) for 16 /4" high overhead WDHW-L left mount 15 lb. Overhead Cabinet Canopy Tops ■ 1 Markerboard Tray cabinets WLP39 39 ⁄4" PART NO. DESCRIPTION CAPACITY PART NO. USE WITH SECTION WIDTH ■ 1 RD = retractable door WLP45 45 ⁄4" WAS right mount 15 lb. Optional magnetic tray for holding markers or OHC-C21 21 1⁄4" WAS-L left mount 15 lb. erasers. Fastens magnetically to markerboard. * plexiglas doors available for cabinets 27" and OHC-C27 27 1⁄4" wider only OHC-C33 33 1⁄4" PART NO. DESCRIPTION 3. Select lock type (box ■). OHC-C39 39 1⁄4" MBT 18" long tray I = individual OHC-C45 45 1⁄4" Backstops K = keyed-alike M = master Prevents items from rolling off workbench. * for lock options, see page 42 3" in height. Available in 5 standard widths 4. Select mounting rail that matches the (21", 27", 33", 39" and 45") which corre- section width you have chosen. spond to section widths. Painted to match frame. 5. Select cabinet color (see page 43 for color chart). PART NO. USE WITH SECTION WIDTH WBS21 21 1⁄4" EXAMPLE: to order a Bright Blue OHC2716 1 WBS27 27 ⁄4" overhead cabinet with a retractable door and WBS33 33 1⁄4" an individual lock, the part number would be WBS39 39 1⁄4" WBS45 45 1⁄4" OHC2716-RD-I , the mounting rail would be OHC-FWB27 and the paint color code would be “BB.”

88 89 FlexWorks ® FloorStand

® ••••••••••••••••••• The FlexWorks FloorStand is ••••••••••••••••••• FlexWorks FloorStand Frames ••••••••••••••••••• FlexWorks FloorStand ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• the perfect complement to your The FlexWorks FloorStand is available with Easy-Order Combinations ••••••••••••••••••• ------either an offset frame or centered frame con------The combinations below and to the right are ------assembly workstation. Designed to ------figuration. The illustrations below show a side configured to be most useful in applications accept standard FlexWorks compo- view of each configuration. FloorStands are requiring shelf systems, multi-use systems and available in either a 27" wide model (overall box holder systems. nents, the FloorStand can be used width of base is 31") or a 33" wide model 1 in combination with a Lista work- (overall width of base is 37"). To order a mobile set (includes (4) 3 ⁄2" casters and (1) handle), add “M” to the end

bench or by itself as a freestanding ➤ of the part number, or order optional caster set Multi-Use Systems – workstation. Document Pocket and handle shown to the left. Offset Frame Stores paperwork or manuals and can be The Multi-Use System is an offset frame with a Each FloorStand provides for a Select color from the Lista colors shown on the mounted on upright frames. 12" high x pegboard, a louvered panel and a shelf. It fits back cover. 1 easily behind almost any workbench for instant variety of storage and work acces- 64" 9" wide x 2 ⁄ 2" deep. access to frequently used materials, parts and sories. Shelves, plastic box holders, PART NO. tools. Combinations come standard with base FW-DH markerboards and electrical outlet and glides. strips are all offered as standard PART NO. DESCRIPTION FSOF27-2 (1) 27" W x 60" H offset frame

accessories. ➤ (1) 12" pegboard panel (1) 12" louvered panel ➤ 18 1⁄4" ➤ Available in standard 27" and (1) 12" adjustable shelf ➤ 28" ➤ (1) base shelf with retainer mat 33" widths, the FloorStand can be FloorStand – Offset Frame FSOF33-2 (1) 33" W x 60" H offset frame ordered in either stationary or (1) 12" pegboard panel PART NO. DESCRIPTION Shelf Systems – Offset Frame (1) 12" louvered panel FSOF27 27" stationary FloorStand Base Shelf mobile configurations. The Shelf System is an offset frame with (1) 12" adjustable shelf FSOF27M* 27" mobile FloorStand Shelf provides extra storage for large or heavy (1) base shelf with retainer mat 1 3 adjustable shelves and 1 base shelf. (includes handle and 3 ⁄2" casters) items, and can be installed or removed without FSOF33 33" stationary FloorStand Combinations come standard with base and FSOF33M* 33" mobile FloorStand tools. Includes ribbed mat. glides. (includes handle and 3 1⁄2" casters) PART NO. DESCRIPTION ------* 3 1⁄ 2" caster sets are standard. See next column for PART NO. DESCRIPTION ------FSBS27-0 base shelf, 27" wide – offset ------additional sizes. FSOF27-1 (1) 27" W x 60" H offset frame ------FSBS27-C base shelf, 27" wide – centered (3) variable angle shelves ------FSBS33-0 base shelf, 33" wide – offset ------(1) base shelf with retainer mat ------➤ FSBS33-C base shelf, 33" wide – centered FSOF33-1 (1) 33" W x 60" H offset frame ------Tackboard with ------Louvered panel (3) variable angle shelves ------reversible markerboard ------(1) base shelf with retainer mat ------Power supply Handle 64" Box Holder Systems – Pegboard panel Centered Frame The Box Holder System is a centered frame Optional Caster Sets with 6 louvered panels (3 per side) and a base Adjustable shelf shelf. It is designed for maximum access to Adjustable shelf These larger caster sets (2 rigid and 2 swivel ➤ plastic boxes of all sizes. (Plastic boxes must casters) replace the 3 1⁄ 2" casters that come ➤ 14" ➤ be ordered separately — see page 119.) Com- with mobile FloorStand combinations. Variable angle shelf ➤ 28" ➤ binations come standard with base and glides. Variable angle shelf FloorStand – Centered Frame PART NO. DESCRIPTION CAST4X1.25 4" x 1 1⁄4" caster set PART NO. DESCRIPTION PART NO. DESCRIPTION CAST4X2 4" x 2" caster set FSCF27-1 (1) 27" W x 60" H centered frame FSCF27 27" stationary FloorStand CAST6X2 6" x 2" caster set (6) 18" louvered panels FSCF27M* 27" mobile FloorStand (1) base shelf with retainer mat Base shelf (includes handle and 3 1⁄2" casters) FSCF33-1 (1) 33" W x 60" H centered frame FSCF33 33" stationary FloorStand Handle (6) 18" louvered panels FSCF33M* 33" mobile FloorStand Ordered individually. (1) base shelf with retainer mat (includes handle and 3 1⁄2" casters) * 3 1⁄ 2" caster sets are standard. See next column for PART NO. Casters Casters additional sizes. FS-HANDL

90 91 FlexWorks ® FloorStand

® ••••••••••••••••••• The FlexWorks FloorStand is ••••••••••••••••••• FlexWorks FloorStand Frames ••••••••••••••••••• FlexWorks FloorStand ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• ••••••••••••••••••• the perfect complement to your The FlexWorks FloorStand is available with Easy-Order Combinations ••••••••••••••••••• ------either an offset frame or centered frame con------The combinations below and to the right are ------assembly workstation. Designed to ------figuration. The illustrations below show a side configured to be most useful in applications accept standard FlexWorks compo- view of each configuration. FloorStands are requiring shelf systems, multi-use systems and available in either a 27" wide model (overall box holder systems. nents, the FloorStand can be used width of base is 31") or a 33" wide model 1 in combination with a Lista work- (overall width of base is 37"). To order a mobile set (includes (4) 3 ⁄2" casters and (1) handle), add “M” to the end

bench or by itself as a freestanding ➤ of the part number, or order optional caster set Multi-Use Systems – workstation. Document Pocket and handle shown to the left. Offset Frame Stores paperwork or manuals and can be The Multi-Use System is an offset frame with a Each FloorStand provides for a Select color from the Lista colors shown on the mounted on upright frames. 12" high x pegboard, a louvered panel and a shelf. It fits back cover. 1 easily behind almost any workbench for instant variety of storage and work acces- 64" 9" wide x 2 ⁄ 2" deep. access to frequently used materials, parts and sories. Shelves, plastic box holders, PART NO. tools. Combinations come standard with base FW-DH markerboards and electrical outlet and glides. strips are all offered as standard PART NO. DESCRIPTION FSOF27-2 (1) 27" W x 60" H offset frame

accessories. ➤ (1) 12" pegboard panel (1) 12" louvered panel ➤ 18 1⁄4" ➤ Available in standard 27" and (1) 12" adjustable shelf ➤ 28" ➤ (1) base shelf with retainer mat 33" widths, the FloorStand can be FloorStand – Offset Frame FSOF33-2 (1) 33" W x 60" H offset frame ordered in either stationary or (1) 12" pegboard panel PART NO. DESCRIPTION Shelf Systems – Offset Frame (1) 12" louvered panel FSOF27 27" stationary FloorStand Base Shelf mobile configurations. The Shelf System is an offset frame with (1) 12" adjustable shelf FSOF27M* 27" mobile FloorStand Shelf provides extra storage for large or heavy (1) base shelf with retainer mat 1 3 adjustable shelves and 1 base shelf. (includes handle and 3 ⁄2" casters) items, and can be installed or removed without FSOF33 33" stationary FloorStand Combinations come standard with base and FSOF33M* 33" mobile FloorStand tools. Includes ribbed mat. glides. (includes handle and 3 1⁄2" casters) PART NO. DESCRIPTION ------* 3 1⁄ 2" caster sets are standard. See next column for PART NO. DESCRIPTION ------FSBS27-0 base shelf, 27" wide – offset ------additional sizes. FSOF27-1 (1) 27" W x 60" H offset frame ------FSBS27-C base shelf, 27" wide – centered (3) variable angle shelves ------FSBS33-0 base shelf, 33" wide – offset ------(1) base shelf with retainer mat ------➤ FSBS33-C base shelf, 33" wide – centered FSOF33-1 (1) 33" W x 60" H offset frame ------Tackboard with ------Louvered panel (3) variable angle shelves ------reversible markerboard ------(1) base shelf with retainer mat ------Power supply Handle 64" Box Holder Systems – Pegboard panel Centered Frame The Box Holder System is a centered frame Optional Caster Sets with 6 louvered panels (3 per side) and a base Adjustable shelf shelf. It is designed for maximum access to Adjustable shelf These larger caster sets (2 rigid and 2 swivel ➤ plastic boxes of all sizes. (Plastic boxes must casters) replace the 3 1⁄ 2" casters that come ➤ 14" ➤ be ordered separately — see page 119.) Com- with mobile FloorStand combinations. Variable angle shelf ➤ 28" ➤ binations come standard with base and glides. Variable angle shelf FloorStand – Centered Frame PART NO. DESCRIPTION CAST4X1.25 4" x 1 1⁄4" caster set PART NO. DESCRIPTION PART NO. DESCRIPTION CAST4X2 4" x 2" caster set FSCF27-1 (1) 27" W x 60" H centered frame FSCF27 27" stationary FloorStand CAST6X2 6" x 2" caster set (6) 18" louvered panels FSCF27M* 27" mobile FloorStand (1) base shelf with retainer mat Base shelf (includes handle and 3 1⁄2" casters) FSCF33-1 (1) 33" W x 60" H centered frame FSCF33 33" stationary FloorStand Handle (6) 18" louvered panels FSCF33M* 33" mobile FloorStand Ordered individually. (1) base shelf with retainer mat (includes handle and 3 1⁄2" casters) * 3 1⁄ 2" caster sets are standard. See next column for PART NO. Casters Casters additional sizes. FS-HANDL

90 91