DOCSLIB.ORG

Technical Referencetechnical

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Technical Referencetechnical ® Hose information is subject to change. For full details, visit our website or contact Customer Service. TECHNICAL REFERENCE TECHNICAL REFERENCE NATURAL RUBBER NATURAL SBR BUTYL NITRILE NEOPRENE HYPALON EPDM EPICHLOROHYDRIN VITON CROSSLINKED POLYETHYLENE CPE UHMW RUBBER NATURAL SBR BUTYL NITRILE NEOPRENE HYPALON EPDM EPICHLOROHYDRIN VITON CROSSLINKED POLYETHYLENE CPE UHMW Sodium Acetate DDADDDBDDAAA Tall Oil DDDABBDBAA A Sodium Aluminate A A A A A A A A A A A A Tallow DDDAADDAAA A Sodium Bicarbonate AAAAAAAAAAAA Tannic Acid ABACBBACAAAA Sodium Bisulfate AAAAAAAAAAAA Tar DDDBBDDBAD D Sodium Bisulfite AAAAAAAAAAAA Tartaric Acid AABBBAABAAAA Sodium Borate AAAAAAAAAAAA Terpineol DDCDDDCDABAB Sodium Carbonate AAAAAAAAAAAA Tertiary Butyl Alcohol A A A A A A A A A A A A Sodium Chloride AAAAAAAAAAAA Tetrachlorobenzene DDDDDDDDBBDB Sodium Chromate DDADCCBCCBAB Tetrachloroethane DDDDDDDDAB B Sodium Cyanide A A A A A A A A A A A A Tetrachloroethylene D D D D D D D D A B C B Sodium Dichromate DDADCCBCCAAA Tetraethylene Glycol AAAAAAAAAA A Sodium Fluoride AAAAAAAAAAAA Tetrachloromethane DDDCDDDDAB B Sodium Hydroxide A B A B A A A B D A A A Tetrachloronapthalene DDDDDDDDBB B Sodium Hypochlorite C D B D D C B C A B A B Tetraethyl Lead DDDBCDDCAA A Sodium Metaphosphate AAAABBAAAAAA Tetrahydrofuran (THF) DDDDDDDDDACA Sodium Nitrate AAAAAAAAAAAA Thionyl Chloride DDDDDDDDBA A Sodium Nitrite AAAAAAAAAAAA Tin Chloride AAAAAAAAAAAA Sodium Perborate CDADBDBCAA A Tin Tetrachloride A A A A A A A A A A A A Sodium Peroxide BBABBBABAB B Titanium Tetrachloride DDDBCCCCAACA Sodium Phosphate AAAAAAAAAAAA Toluene (Toluol) D D D D D D D D A A C A Sodium Silicate AAAAAAAAAAAA Toluene Diisocyanate (TDI) CCACDDACBA A Sodium Sulfate AAAAAAAAAAAA Toxaphene DDDBBDDBAA A Sodium Sulfide AAAAAAAAAAAA Transformer Oils DDD A B B D A A A A A Sodium Sulfite A A A A A A A A A A A A (Petroleum Base) Sodium Thiosulfate AAAAAAAAAAAA Transformer Oils (Chlorinated D D D D D D D D A B A B Soybean Oil DDBBBBBBAAAA Phenyl Base Askerels) Stannic Chloride AABAAAAAAAAA Transmission Fluids, A DDDBCDDAAA A Stannic Sulfide AAAAAAAAAAAA Transmission Fluids, B DDDCDDDCAA A Stannous Chloride AAAAAAAAAAAA Tricetin ABABBBABDA A Stannous Sulfide A A A A A A A A A A A A Tributyl Amine BBABBCABDAAA Steam, under 300°F Steam Hose Only Tributyl Phosphate DDBDDDBDDACA Steam, over 300°F Steam Hose Only Trichlorobenzene DDDDDDDDBBDB Stearic Acid DDBABBCBAA A Trichloroethane DDDDDDDDAACA Stoddards Solvent DDDACDDAAAAA Trichloroethylene DDDCDDDCABCD Styrene DDDDDDDDBACA Trichloropropane D D D D D D D D A A C A Sugar Solutions (Sucrose) AAAAAAAAAAAA Tricresyl Phosphate (TCP) D D A D D D B D B A A A (Non F.D.A.) Triethanolamine (TEA) BBABAABBDAAA Suifamic Acid CCABBBACAAAA Triethylamine BBBBAABBBAAA Sulfite Liquors BBABBABBAA A Triethylene Glycol A A A A A A A A A A A A Sulfonic Acid DDDDCCDCDB B Trinitrotoluene (TNT) DDDDBBDDBD D Sulfur (Molten) DDBCCCCBAD D Triphenyl Phosphate DDADCCBDCA A Sulfur Chloride DDDDDBDCAB B Trisodium Phosphate AAAAAAAAAAAA Sulfur Dioxide CCBDBBCCAA A Tung Oil DDCABBDAAAAA Sulfur Hexafluoride AAAAAAAAAA A Turbine Oil DDDBBBDAAA A Sulfur Trioxide DDBDDDCDAB B Turpentine DDDBBDDAAABA Sulfuric Acid, 25% B B B B A A B C A A A A 2, 4D With 10% Fuel Oil DDDAADDAAA A Sulfuric Acid, 25-50% B D A D C A B D A A A A Ucon Hydrolube Oils DDAABDAAAA A Sulfuric Acid, 50-93% D D C D C B B D A A C A Undecanol AAAAAAAABAAA Sulfuric Acid, Fuming DDDDDDDDDDDD Unsymmetrical Dimethyl- DDADDAADDC C Sulfurous Acid BCBCBABCAAAA Hydrazine (UDMH) These ratings are to be used only as a guide. 127.
Load more

Recommended publications
  • Working with Hazardous Chemicals
    A Publication of Reliable Methods for the Preparation of Organic Compounds Working with Hazardous Chemicals The procedures in Organic Syntheses are intended for use only by persons with proper training in experimental organic chemistry. All hazardous materials should be handled using the standard procedures for work with chemicals described in references such as "Prudent Practices in the Laboratory" (The National Academies Press, Washington, D.C., 2011; the full text can be accessed free of charge at http://www.nap.edu/catalog.php?record_id=12654). All chemical waste should be disposed of in accordance with local regulations. For general guidelines for the management of chemical waste, see Chapter 8 of Prudent Practices. In some articles in Organic Syntheses, chemical-specific hazards are highlighted in red “Caution Notes” within a procedure. It is important to recognize that the absence of a caution note does not imply that no significant hazards are associated with the chemicals involved in that procedure. Prior to performing a reaction, a thorough risk assessment should be carried out that includes a review of the potential hazards associated with each chemical and experimental operation on the scale that is planned for the procedure. Guidelines for carrying out a risk assessment and for analyzing the hazards associated with chemicals can be found in Chapter 4 of Prudent Practices. The procedures described in Organic Syntheses are provided as published and are conducted at one's own risk. Organic Syntheses, Inc., its Editors, and its Board of Directors do not warrant or guarantee the safety of individuals using these procedures and hereby disclaim any liability for any injuries or damages claimed to have resulted from or related in any way to the procedures herein.
    [Show full text]
  • Coast Guard, DHS Pt. 150, App. I
    Coast Guard, DHS Pt. 150, App. I APPENDIX I TO PART 150—EXCEPTIONS Member of reactive group Compatible with TO THE CHART Propylene glycol (20) (a) The binary combinations listed below Oleum (0) ............................... Hexane (31) have been tested as prescribed in Appendix Dichloromethane (36) III and found not to be dangerously reactive. Perchloroethylene (36) These combinations are exceptions to the 1,2-Propylene glycol (20) ...... Diethylenetriamine (7) Compatibility Chart (Figure 1) and may be Polyethylene polyamines (7) Triethylenetetramine (7) stowed in adjacent tanks. Sodium dichromate, 70% (0) Methyl alcohol (20) Member of reactive group Compatible with Sodium hydrosulfide solution Methyl alcohol (20) (5). Acetone (18) .......................... Diethylenetriamine (7) Iso-Propyl alcohol (20) Acetone cyanohydrin (0) ....... Acetic acid (4) Sulfuric acid (2) ..................... Coconut oil (34) Acrylonitrile (15) ..................... Triethanolamine (8) Coconut oil acid (34) Palm oil (34) 1,3-Butylene glycol (20) ......... Morpholine (7) Tallow (34) 1,4-Butylene glycol (20) ......... Ethylamine (7) Sulfuric acid, 98% or less (2) Choice white grease tallow Triethanolamine (8) (34) gamma-Butyrolactone (0) ...... N-Methyl-2-pyrrolidone (9) Caustic potash, 50% or less Isobutyl alcohol (20) (b) The binary combinations listed below (5). Ethyl alcohol (20) have been determined to be dangerously re- Ethylene glycol (20) active, based on either data obtained in the Isopropyl alcohol (20) Methyl alcohol (20) literature or on laboratory testing which has iso-Octyl alcohol (20) been carried out in accordance with proce- Caustic soda, 50% or less (5) Butyl alcohol (20) dures prescribed in Appendix III. These com- tert-Butyl alcohol, Methanol binations are exceptions to the Compat- mixtures ibility Chart (Figure 1) and may not be Decyl alcohol (20) stowed in adjacent tanks.
    [Show full text]
  • Massachusetts Chemical Fact Sheet
    Massachusetts Chemical Fact Sheet Hexavalent Chromium Table 1: HEXAVALENT CHROMIUM COMPOUNDS: Compounds SELECTED EXAMPLES* Compound Chemical Formula CAS # This fact sheet is part of a series of chemical fact sheets Ammonium chromate (NH ) Cr0 7788-98-9 developed by TURI to help Massachusetts companies, 4 2 4 community organizations and residents understand the Ammonium dichromate (NH4)2Cr2O7 7789-09-5 chemical’s use and health and environmental effects, as Barium chromate BaCrO4 10294-40-3 well as the availability of safer alternatives. tert-Butyl Chromate [(CH3)3CO]2CrO2 1189-85-1 Hexavalent chromium compounds are a toxic form of Calcium chromate CaCrO4 13765-19-0 chromium and are used in a variety of industrial processes Chromic acid H2CrO4 7738-94-5 and products. Chromium VI chloride CrCl6 14986-48-2 Hexavalent chromium compounds are human carcinogens, Chromic trioxide CrO3 1333-82-0 mutagens and developmental toxicants and are acutely Hexavalent chromium ion Cr6+ 18540-29-9 toxic. Non-hexavalent chromium compounds do not pose Lead chromate PbCrO4 7758-97-6 the same level of concern with regard to either chronic or Lead chromate oxide PbCrO4-PbO 8454-12-1 acute toxicity. Potassium chlorochromate KCrO3Cl 16037-50-6 Until 2011, all chromium compounds were treated as Potassium chromate K2CrO4 7789-00-6 a single category under TURA. Beginning with Potassium dichromate K Cr O 7778-50-9 reporting year 2012, hexavalent chromium 2 2 7 compounds are reportable under TURA as a Silver chromate Ag2CrO4 7784-01-2 separate category and are designated as a Higher Sodium chromate Na2CrO4 7775-11-3 Hazard Substance, which lowers the reporting Sodium dichromate 7789-12-0 threshold to 1,000 lb/year.
    [Show full text]
  • Oxidation of 9-Fluorenol to 9-Fluorenone with Sodium Hypochlorite
    CHEM 2229 EXP 1: Oxidation of 9-Fluorenol to 9-Fluorenone with Sodium Hypochlorite Objective: In this experiment you will learn how to perform an oxidation reaction by oxidizing an alcohol (9- hydroxyfluorene) to a ketone (9-fluorenone) using sodium hypochlorite in an acidic environment; how to perform TLC to monitor a reaction; how to perform an extraction to isolate a product; and, how to verify purity of a product using TLC and melting point. * Chromatography is a useful method for separating components of a mixture of compounds based on their polarity. Thin layer chromatography is especially useful for determining the number of components in a mixture, the identity of the compounds, and the purity of a compound. **Solvent Extraction is also known as Liquid–liquid extraction (LLE) or partitioning. It is a method used to separate compounds based on their relative solubilities in two different immiscible liquids: usually the polar solvent water and a non-polar organic solvent. Immiscible means that the liquids do not mix and because of this form two distinct layers. ***The melting point (MP) is a physical property of a solid also used for the purpose of identification and purity determination. Reading Assignment: OCLT: OCLT, pp. 83-108 (chromatography generalities & TLC), pp. 368-369 (TLC technique summary), pp. 203-246 (extraction); pp. 376-381 (extraction illustrations); 366 (vacuum filtration); and 309-315 (melting point). Solomons Organic Chemistry, 12th ed. (Note: Pages correspond to 12th ed.) pp. 542-547 (12.4 Oxidation of Alcohols) Concepts: Acids, Bases, Decantation, Drying Agents, Exothermic Reactions, Extraction, Half Cell Method, Oxidation/Reduction, Oxidizing Agents, Reducing Agents, Reflux, Salting Out Chemicals: acetic acid (glacial), acetone, 9-fluorenol, 9-fluorenone, hexane, sodium bicarbonate, sodium chloride, sodium hypochlorite (aq soln) / bleach, sodium sulfate Safety Precautions: Wear chemical splash-proof goggles and appropriate attire at all times.
    [Show full text]
  • Sodium Dichromate Listing Background Document for the Inorganic Chemical Listing Determination
    SODIUM DICHROMATE LISTING BACKGROUND DOCUMENT FOR THE INORGANIC CHEMICAL LISTING DETERMINATION This Document Does Not Contain Confidential Business Information August 2000 U.S. ENVIRONMENTAL PROTECTION AGENCY ARIEL RIOS BUILDING 1200 PENNSYLVANIA AVENUE, N.W. WASHINGTON, D.C. 20460 i TABLE OF CONTENTS 1. SECTOR OVERVIEW ....................................................1 1.1 SECTOR DEFINITION, FACILITY NAMES AND LOCATIONS .....1 1.2 PRODUCTS, PRODUCT USAGE, AND MARKETS ....................1 1.3 PRODUCTION CAPACITY .........................................4 1.4 PRODUCTION, PRODUCT AND PROCESS TRENDS ...................4 2. ELEMENTIS CHROMIUM ................................................5 2.1 PRODUCTION PROCESS DESCRIPTION .............................5 2.2 PRODUCTION TRENDS, CHANGES AND IMPROVEMENTS ............7 2.3 RESIDUAL GENERATION AND MANAGEMENT ......................7 2.3.1 Spent Post-Neutralization Ore Residue .............................7 2.3.2 Caustic Filter Sludge ..........................................9 2.3.3 Sodium Dichromate Evaporation Unit Wastewater ...................10 2.3.4 Sodium Chromate Evaporation Unit Wastewater ....................10 2.3.5 Reduced Chromium Treatment Residues from Spent Ore Residue Treatment Unit .....................................................11 2.3.6 Reduced Chromium Treatment Residues from Wastewater Treatment Unit .........................................................12 2.3.7 Commingled Treated Wastewaters ...............................13 2.3.8 Process Filters, Membranes,
    [Show full text]
  • ANALYSIS of ALTERNATIVES Public Version
    ANALYSIS OF ALTERNATIVES Public Version Legal name of applicant(s): Kemira Chemicals Oy Submitted by: Kemira Chemicals Oy Substance: Sodium dichromate Use title: Use of sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite. Use number: 1 Disclaimer This report has been prepared by Risk & Policy Analysts Ltd, with reasonable skill, care and diligence under a contract to the client and in accordance with the terms and provisions of the contract. Risk & Policy Analysis Ltd will accept no responsibility towards the client and third parties in respect of any matters outside the scope of the contract. This report has been prepared for the client and we accept no liability for any loss or damage arising out of the provision of the report to third parties. Any such party relies on the report at their own risk. Note This public version of the Analysis of Alternatives includes some redacted text. The letters indicated within each piece of redacted text correspond to the type of justification for confidentiality claims which is included as an Annex (Section 7) in the complete version of the document. Table of contents 1 Summary..............................................................................................................................1 1.1 Use applied for................................................................................................................................1
    [Show full text]
  • Chapter 3 Alcohols, Phenols, and Ethers
    Chapter 3 Alcohols, Phenols, and Ethers Chapter 3 Alcohols, Phenols, and Ethers Chapter Objectives: • Learn to recognize the alcohol, phenol, and ether functional groups. • Learn the IUPAC system for naming alcohols, phenols, and ethers. • Learn the important physical properties of the alcohols, phenols, and ethers. • Learn the major chemical reaction of alcohols, and learn how to predict the products of dehydration and oxidation reactions. • Learn to recognize the thiol functional group. Mr. Kevin A. Boudreaux Angelo State University CHEM 2353 Fundamentals of Organic Chemistry Organic and Biochemistry for Today (Seager & Slabaugh) www.angelo.edu/faculty/kboudrea Introduction • In this chapter, we will start looking at organic molecules that incorporate C—O bonds. • Oxygen is in Group 6A of the periodic table, and in most of its compounds, contains two single bonds and two lone pairs (or one double bond and two lone pairs), and is sp3-hybridized with a bent molecular shape: O O •The alcohol, phenol, and ether functional groups are found in a number of important naturally occurring molecules: CH3CH2OH Ethanol OH CH3CH2OCH2CH3 Diethyl ether HO Menthol Cholesterol 2 1 Chapter 3 Alcohols, Phenols, and Ethers Alcohols 3 The Hydroxy (—OH) Functional Group •The hydroxyl group (—OH) is found in the alcohol and phenol functional groups. (Note: that’s not the same as hydroxide, OH-, which is ionic.) –in alcohols, a hydroxyl group is connected to a carbon atom. –in phenols, —OH is connected to a benzene ring. (The “parent” molecule of this class is also named phenol: PhOH or C6H5OH.) • When two carbon groups are connected by single bonds to an oxygen, this is classified as the ether functional group.
    [Show full text]
  • Semtech – REACH-SVHC 219 Compliance Inquiry >
    < Semtech – REACH-SVHC 219 Compliance Inquiry > Dear Valued Customer, August 31, 2021 Semtech Corporation acknowledges that the European Union has enacted the “REACH Regulation”, EC1907/2006. And within that regulation, Annex XIV addresses a listing of Substances of Very High Concern, SVHC, and Annex XVII which maintains a complete listing of hazardous substances along with restrictions on the manufacture and release to market of such hazardous substances. As Annex XIV continues to mature to address SVHC candidate list of substances proposed by ECHA (European Chemical Agency), and the guidelines defining protocol for the semiconductor industry are ratified, Semtech Corporation will continue to assess impact to our product, and the manufacturing processes used by our suppliers, and continue to take appropriate actions necessary to ensure compliance while maintaining the integrity of our supply chain. Part(s) listed below are not subject to EU WFD-SCIP directive. As of the date of this letter, Semtech product, identified as pb-free, RoHS compliant, and their related processes do not intentionally use, add, contain nor exceed 0.1% weight by weight, or release any of the substances of very high concern listed in annex XIV and referenced in the attached table. This also applies to the Semtech product noted below which you expressed an interest in. Part number(s): RCLAMP5031T.TNT Additionally, Semtech Corporation employs and maintains a fabless business model as we do not own any significant portion of a fabrication or assembly process. Pursuant to our business model, Semtech Corporation does not own nor operate a fabrication facility within the European Union.
    [Show full text]
  • 1) Chemical Product and Company Identification
    In accordance with Regulation 1907/2006 SAFETY DATA SHEET (REACH), amended by Regulation 2015/830 3.01 / 20200501 SODIUM DICHROMATE 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY 1.1. Product identifier Name: Sodium dichromate (anhydrouS) SynonymS : Sodium bichromate anhydrouS CLP Annex I, index nr. 024-004-00-7 EC/EINECS No. : 234-190-3 CAS No. 10588-01-9, Chromic acid, Sodium Salt RegiStration nr : 01-2119435525-40-0015 1.2. Relevant identified uSeS of the SubStance or mixture and uSeS adviSed againSt 1.2.1 Intended use: USe of the SubStance iS limited to the authoriSation numberS: REACH/20/4/0: Formulation of mixtures for Surface treatment of metalS (Such aS aluminium, Steel, zinc, magnesium, titanium, alloys), compoSites, SealingS of anodic filmS and for uSe for electrolytic paSSivation of tin plated Steel for the packaging induStry intended excluSively for uSes REACH/20/4/1 and REACH/20/4/2 REACH/20/4/1: Surface treatment of metalS (such as aluminium, Steel, zinc, magnesium, titanium, alloys), compoSites and Sealings of anodic filmS for the aeroSpace induStry in Surface treatment procesSes in which any of the key functionalities liSted in the Annex iS required (See end of thiS MSDS) REACH/20/4/2: Electrolytic paSSivation of tin-plated Steel for the packaging induStry. SEE E-SDS FOR MORE INFORMATION 1.2.2 USeS adviSed againSt no information available 1.3 DetailS of the Supplier of the Safety dataSheet Supplier : GENTROCHEMA BV Lage Ham 190, NL-5102 AE Dongen, Nederland Tel.: +31.162.249020 E-mail : [email protected] WebSite : www.gentrochema.nl 1.4 Emergency telephone nr : during office hourS (08:30 - 17:00) : +31.183.304422 After office hourS (only for health profeSSionalS) : +44.844.892.01 2.
    [Show full text]
  • Chemical Resistance Guide
    04/16 CHEMICAL RESISTANCE GUIDE PRIMARY FLUID SYSTEMS INC. 1050 COOKE BLVD., BURLINGTON, ONTARIO L7T 4A8 TEL:(905)333-8743 FAX:(905)333-8746 1-800-776-6580 email: [email protected] www.primaryfluid.com INDEX PAGE Disclaimer .................................................................................................... 3 Material Guide .............................................................................................. 4 Chemical Guide ............................................................................................ 5 – 22 Chemical Formulas ...................................................................................... 23 - 35 2 Primary Fluid Systems Inc CALL TOLL FREE 1-800-776-6580 PRIMARY FLUID SYSTEMS INC. DISCLAIMER Primary Fluid Systems Inc. takes no responsibility for the enclosed information in use with product selection against chemical resistance. The data in the following tables were obtained from numerous sources in the industry, and believed to be reliable but cannot be guaranteed. The information is intended as a general guide for material selection. The end user should be aware of the fact that actual service conditions will affect the chemical resistance. It is recommended that you cross reference this guide with one or two others to insure consistency. All data provided is based on testing at 70ºF [21ºC]. Thermoplastics, Metals and Elastomers have outstanding resistance to a wide range of chemical reagents. Such resistance, however, is a function A* Excellent – No Effect both of
    [Show full text]
  • Safety Data Sheet According to 29CFR1910/1200 and GHS Rev
    Safety Data Sheet according to 29CFR1910/1200 and GHS Rev. 3 Effective date : 10.24.2014 Page 1 of 9 Sodium Dichromate, Lab Grade SECTION 1 : Identification of the substance/mixture and of the supplier Product name : Sodium Dichromate, Lab Grade Manufacturer/Supplier Trade name: Manufacturer/Supplier Article number: S25546 Recommended uses of the product and uses restrictions on use: Manufacturer Details: AquaPhoenix Scientific 9 Barnhart Drive, Hanover, PA 17331 Supplier Details: Fisher Science Education 15 Jet View Drive, Rochester, NY 14624 Emergency telephone number: Fisher Science Education Emergency Telephone No.: 800-535-5053 SECTION 2 : Hazards identification Classification of the substance or mixture: Health hazard Carcinogenicity, category 1B Respiratory sensitization, category 1 Germ cell mutagenicity, category 1B Reproductive toxicity, category 1B Specific target organ toxicity following repeated exposure, category 1 Corrosive Skin corrosion, category 1B Serious eye damage, category 1 Irritant Skin sensitization, category 1 Acute toxicity (oral, dermal, inhalation), category 4 Oxidizing Oxidizing solids, category 2 Environmentally Damaging Acute hazards to the aquatic environment, category 1 Chronic hazards to the aquatic environment, category 1 Toxic Acute toxicity (oral, dermal, inhalation), category 2 Ox. Sol. 2 Carc. 1B Repr. 1B STOT RE 1 Aquatic Acute 1 Created by Global Safety Management, Inc. -Tel: 1-813-435-5161 - www.gsmsds.com Safety Data Sheet according to 29CFR1910/1200 and GHS Rev. 3 Effective date : 10.24.2014 Page 2 of 9 Sodium Dichromate, Lab Grade Aquatic Chronic 1 Acute Oral Tox. 2 Acute Dermal Tox. 4 Acute inhalation tox. 4 Skin Corr. 1B Eye corr. 1 Skin Sens. 1 Resp.
    [Show full text]
  • Chromium Trioxide EC Number: 215-607-8 CAS Number: 1333-82-0
    SVHC SUPPORT DOCUMENT Substance name: Chromium trioxide EC number: 215-607-8 CAS number: 1333-82-0 MEMBER STATE COMMITTEE SUPPORT DOCUMENT FOR IDENTIFICATION OF CHROMIUM TRIOXIDE AS A SUBSTANCE OF VERY HIGH CONCERN BECAUSE OF ITS CMR PROPERTIES Adopted on 2 December 2010 1 SVHC SUPPORT DOCUMENT CONTENTS JUSTIFICATION .........................................................................................................................................................4 1 IDENTITY OF THE SUBSTANCE AND PHYSICAL AND CHEMICAL PROPERTIES .................................4 1.1 Name and other identifiers of the substance...................................................................................................4 1.2 Composition of the substance.........................................................................................................................4 1.3 Physico-chemical properties ..........................................................................................................................5 2 HARMONISED CLASSIFICATION AND LABELLING....................................................................................6 3 ENVIRONMENTAL FATE PROPERTIES...........................................................................................................7 4 HUMAN HEALTH HAZARD ASSESSMENT.....................................................................................................8 5 ENVIRONMENTAL HAZARD ASSESSMENT ..................................................................................................9
    [Show full text]