DOCSLIB.ORG

Kishigo High Performance Surveyors Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Kishigo High Performance Surveyors Catalog HIGH PERFORMANCE 2901 S. Daimler • Santa Ana, CA 92705 • 800.338.9480 • mlkishigo.com SURVEYORS BROCHURE PRO HIGH PERFORMANCE SURVEYORS VESTS HIGH PERFORMANCE SURVEYORS VESTS PRO SERIES SERIES A PERFORMANCE FEATURES: B • Snap front closure • 2” 3M™ Scotchlite™ Reflective Material laminated to 3” contrasting fabric • Left mic holder • 2 lapel grommets • 1 year warranty (Pro Series only) against defects in workmanship REINFORCED POCKETS/POUCHES: Outside chest pockets: • Left 2-tier with pull tab, 6 division pocket with flaps (hook and loop closure) • Right 2-tier with pull tab, 2 division pocket with flaps (hook and loop closure) Outside lower pockets: • Left and right patch pockets with flaps with pull tab (hook and loop closure) • Left and right side access hand pockets Inside chest pockets: • Chest patch pocket Inside lower pockets: • 2 lower inside pockets with pull tabs (hook and loop closure) Back pouches: • Inner pouch with heavy duty dual side zipper closures • Outer pouch with dual side snap closures S1000 • LIME A S1001 • ORANGE DuraTuff SIZES: M-5XL ANSI/ISEA 107 Class 2 Compliant S1010 • LIME B S1011 • ORANGE C DuraTuff/Ultra-Cool™ Mesh SIZES: M-5XL ANSI/ISEA 107 Class 2 Compliant S2010 • LIME C S2011 • ORANGE DuraTuff/Ultra-Cool™ Mesh SIZES: M-5XL ANSI/ISEA 107 Class 3 Compliant Outside chest pockets Outside lower pockets Inside pockets Back pouches Pouch reinforcement 1 2 ANSI Class 2 ANSI Class 3 Ultra-Cool™ Mesh 3.4 oz DuraTuff 8 oz Polyester 6 oz Hydrowick Lite 3 oz SURVEYORS SURVEYORS SERIES HIGH PERFORMANCE SURVEYORS VESTS HIGH PERFORMANCE SURVEYORS VESTS SERIES A B C PERFORMANCE FEATURES: D • Snap front closure • 2” Reflexite® combined performance reflective material • Left and right mic holders • 2 lapel grommets REINFORCED POCKETS/POUCHES: Outside chest pockets: • Left multi-function 2-tier pocket • Right radio pocket with flap (hook and loop closure) Outside lower pockets: • Left and right pockets with flaps (left pocket with 2 grommets for flagging tape) • Left and right stake pockets • Left and right outside pockets with elastic trim for securing paint cans Inside lower pockets: • Left and right full length zippered pockets (additional pocket behind) with load bearing adjustable straps Back pouches: • Inner pouch with left and right zipper access • Reinforced backpack style pouch with adjustable snap and drawstring closure Right chest pocket Left chest pocket Outside lower pockets Inside lower pockets Back pouches S3000 • LIME A S3001 • ORANGE Polyester SIZES: M-5XL ANSI/ISEA 107 Class 2 Compliant S4010 • LIME S4000 • LIME S3010 • LIME B S4011 • ORANGE C S4001 • ORANGE D S3011 • ORANGE DuraTuff/Ultra-Cool™ Mesh Polyester/Ultra-Cool™ Mesh DuraTuff/Ultra-Cool™ Mesh SIZES: M-5XL SIZES: M-5XL SIZES: M-5XL ANSI/ISEA 107 ANSI/ISEA 107 ANSI/ISEA 107 Class 3 Compliant Class 3 Compliant Class 2 Compliant 3 4 ANSI Class 2 ANSI Class 3 Ultra-Cool™ Mesh 3.4 oz DuraTuff 8 oz Polyester 6 oz Hydrowick Lite 3 oz CALTRANS ECONOMY SERIES HIGH PERFORMANCE SURVEYORS VESTS HIGH PERFORMANCE SURVEYORS VESTS SERIES A PERFORMANCE FEATURES: PERFORMANCE FEATURES: A • Zipper front closure • Zipper front closure • 2” 3M™ Scotchlite™ Reflective Material • 2” Avery Dennison Omni-Brite™ laminated to 3” contrasting color reflective material • Left and right mic holders • Left mic holder • 2 lapel grommets • 2 lapel grommets REINFORCED POCKETS/POUCHES: POCKETS/POUCHES: Outside chest pockets: Outside chest pockets: • Left multi-function 2-tier pocket with dual • Right chest pocket with 4 divisions function flap (pocket flap can be held open or • Left chest 2-tier pencil pocket closed with hook and loop tab) Outside lower pockets: • Large right multi-use gusseted pocket • Left and right lower flap patch pockets • Pull tabs for easy opening (hook and loop closure) Outside lower pockets: Inside lower pockets: • Left and right pockets with flaps and pull tabs • Left and right lower inside patch pockets for easy opening (left pocket with 2 grommets Back pouch: for flagging tape) • Hidden back pouch with single sided • Left and right stake pockets zipper access • Left and right outside pockets with elastic trim for securing paint cans Inside lower pockets: A S7000 • LIME • Left and right full length zippered pockets S7001 • ORANGE (additional pocket behind) with load bearing Hydrowick/Ultra-Cool™ Mesh adjustable straps SIZES: M-5XL Back pouches: ANSI/ISEA 107 • Hidden pouch with left and right zipper access Class 2 Compliant S5000 • LIME A S5001 • ORANGE Polyester/Ultra-Cool™ Mesh SIZES: M-5XL ANSI/ISEA 107 Class 2 Compliant S5010 • LIME B S5011 • ORANGE Polyester/Ultra-Cool™ Mesh SIZES: M-5XL PERFORMANCE FEATURES: ANSI/ISEA 107 B • Zipper front closure Class 3 Compliant • 2” 3M™ Scotchlite™ Reflective Material Outside chest pockets Outside lower pockets • Left mic holder B • Left lapel grommet POCKETS/POUCHES Outside chest pockets: • Left cell phone pocket Outside lower pockets: • Right pocket with flap (with grommet for flagging tape and pull tab for easy opening) • Left and right pocket with elastic trim to secure tools (left pocket has load bearing strap) Inside chest pocket: • Right 2-tier pencil pocket with 4 divisions Inside lower pockets Back pouch Inside lower pocket: • Left large patch pocket S8000 • LIME B S8001 • ORANGE Polyester/Ultra-Cool™ Mesh SIZES: M-5XL ANSI/ISEA 107 Class 2 Compliant 5 6 ANSI Class 2 ANSI Class 3 Ultra-Cool™ Mesh 3.4 oz DuraTuff 8 oz Polyester 6 oz Hydrowick Lite 3 oz ECONOMY ORIGINAL HIGH PERFORMANCE SURVEYORS VESTS SERIES HIGH PERFORMANCE SURVEYORS VESTS SERIES PERFORMANCE FEATURES: C A • Zipper front closure • 2” 3M™ Scotchlite™ Reflective Material with 3” contrasting color • Left mic holder • Left lapel grommet POCKETS/POUCHES: Outside chest pockets: • Left 4 division pencil pocket • Right pocket with single division Outside lower pockets: • Left and right patch pockets with flaps (hook and loop closure) Inside lower pockets: • Left and right patch pocket (hook and loop closure) Back pouch: • Hidden back pouch with single sided zipper access S9000 • LIME C S9001 • ORANGE Polyester/Ultra-Cool™ Mesh SIZES: M-5XL ANSI/ISEA 107 Class 2 Compliant PERFORMANCE FEATURES: D • Zipper front closure • 2” 3M™ Scotchlite™ Reflective Material with 3” contrasting color • Left and right mic holder POCKETS/POUCHES Outside chest pockets: PERFORMANCE FEATURES: Outside chest pockets Outside lower pockets • Left 2-tier pencil pocket • Snap front closure • Right patch pocket with hook • 2” Reflexite® combined performance reflective material and loop closure • Left mic holder Outside lower pockets: • 2 lapel grommets • Left and right patch pockets with scalloped flaps (hook REINFORCED DURATUFF POCKETS/POUCHES: and loop closure) Outside chest pockets: Inside lower pockets: • Left 4 division pencil pocket • Left and right large patch • Right compass pocket pockets Outside lower pockets: Back pouch: • Left and right full length pleated pocket (left pocket has a • Hidden back pouch with grommet for flagging tape) single sided zipper access Inside chest pockets: • Left and right patch pockets (right pocket Inside pockets Hidden pouch has hook and loop closure) S9010 • LIME D Inside lower pockets: S9011 • ORANGE • Left and right full length pockets Polyester/Ultra-Cool™ Mesh Back pouch: SIZES: M-5XL • Hidden pouch with single sided zipper access ANSI/ISEA 107 Class 3 Compliant S6010 • LIME A S6011 • ORANGE DuraTuff/Ultra-Cool™ Mesh SIZES: M-5XL ANSI/ISEA 107 Class 2 Compliant 3M and Scotchlite are trademarks of 3M 7 8 DuraTuff 8 oz Polyester 6 oz Hydrowick Lite 3 oz.
Load more

Recommended publications
  • Tailoring Series TECHNIQUES for TAILORING UNDERLINING a TAILORED GARMENT—Underlining Is a Second Layer of Fabric. It Is Cut By
    tailoring series TECHNIQUES FOR TAILORING UNDERLINING A TAILORED GARMENT—Underlining is a second layer of fabric. It is cut by the garment pattern pieces and staystitched to the wrong side of the corresponding outer sections before any seams are joined. The two layers are then handled as one. As a general guide, most suit jackets and coats look more pro- fessional when underlined. Underlining is especially recommended for lightweight wool materials, loosely woven materials and light- colored materials. For additional information on selecting fabrics for underlining and applying the underlining, see Lining a Shirt 01' Dress HE 72, N. C. Agricultural Extension Service. STAYSTITCHING—Staystitch all outer garment pieces before construction begins. If garment is underlined, stays-titching is done when the two layers of fabric are sewn together. Staystitch 1/3 in. outside seamline (on the seam allowance). Stay- stitch “ with matching cotton thread on all curved *areas that may stretch during construction such as necklines, side seams, shoulder seams, armholes, and side seams of skirt. Use directional stitching always to prevent stretching of fabric and to prevent one layer of fabric from riding. The direction to stitch is indicated by small arrows on the pattern on the seamlines. INTERFACINGS—Select a high quality hair canvas for the front and collar of coats and jackets. The percentage of wool indicates the quality—the higher the wool content of the canvas the better the quality. Since a high percentage of wool makes the hair canvas fairly dark in color, it cannot be used successfully under light-colored fabrics. In these cases use an interfacing lighter in color and lower in wool content.
    [Show full text]
  • C:\Documents and Settings\Fred.Schottman\Aawp\Y07
    Harmonized Tariff Schedule of the United States (2007) Annotated for Statistical Reporting Purposes CHAPTER 99 TEMPORARY LEGISLATION; TEMPORARY MODIFICATIONS ESTABLISHED PURSUANT TO TRADE LEGISLATION; ADDITIONAL IMPORT RESTRICTIONS ESTABLISHED PURSUANT TO SECTION 22 OF THE AGRICULTURAL ADJUSTMENT ACT, AS AMENDED XXII 99-1 U.S. Notes 1. The provisions of this chapter relate to legislation and to executive and administrative actions pursuant to duly constituted authority, under which: (a) One or more of the provisions in chapters 1 through 98 are temporarily amended or modified; or (b) Additional duties or other import restrictions are imposed by, or pursuant to, collateral legislation. 2. Unless the context requires otherwise, the general notes and rules of interpretation, the section notes, and the notes in chapters 1 through 98 apply to the provisions of this chapter. Statistical Notes 1. For statistical reporting of merchandise provided for herein: (a) Unless more specific instructions appear in the subchapters of this chapter, report the 8-digit heading or subheading number (or 10-digit statistical reporting number, if any) found in this chapter in addition to the 10-digit statistical reporting number appearing in chapters 1 through 97 which would be applicable but for the provisions of this chapter; and (b) The quantities reported should be in the units provided in chapters 1 through 97. 2. For those headings and subheadings herein for which no rate of duty appears (i.e., those headings and subheadings for which an absolute quota is prescribed), report the 8-digit heading or subheading number herein followed by the appropriate 10-digit statistical reporting number from chapters 1 through 97.
    [Show full text]
  • Dressmaking up to Date
    PRICE, 25 CENTS or Is. PUBLISHED BY THE BUTTERICK PUBLISHING COMPANY, Limited AT THE BUTTERICK BUILDING, NEW YORK PARIS LONDON NEW YORK TORONTO Copyright, /QOj, by The Butter ick Publishing Co., Limited. Entered at Stationers’ Hall. A ll rights reserved. ■r o: ; < A Dressmaking, TUp to Date h.-K'ARV,^ rorS^BiS1 f'flsi $cp»es jits,wiYW( { . > i SfcP Hi ; « Ooiwngns umt J-^/ o2 &. I c/C61 / a 1X733! COPY f;s> . 3 FRONTISPIECE —THE SEWING CIRCLE HAND-SEWING STITCHES IMPORTANT POINTS AND AIDS IN DRESSMAKING THE CORRECT METHOD OF ALTERING PATTERNS SHIRT-BLOUSES DRAPED WAISTS SKIRTS NOVEL, ARTISTIC SEAMS WEDDING AND EVENING GOWNS THE TAILOR-MADE GOWN COATS AND JACKETS PRACTICAL AND ORNAMENTAL STITCHES BIAS BANDS AND FOLDS—TURNING CORNERS AN EMPIRE TEA-GOWN DESIRABLE GARMENTS FOR MATERNITY WEAR MAKING /ND FINISHING UNDERWEAR THE BATH-ROBE. CHILDREN’S CLOTHES BOYS’ SUITS XTlp to 5>ate inning (EirrU SDressmahtrtg, TUp to Date SIMPLE SEWING STITCE1ES AKING A KNOT.—Holding the threaded needle in the right hand, twist the end of the thread once and a half, around the forefinger of the left hand; press, roll downward on the ball of the thumb, twisting once or twice; slip off and draw down M with the middle finger of the left hand. BASTING.—There are two kinds of basting; even and uneven. In even basting the stitches; and spaces are the same length; in uneven basting, as its name implies, the stitches are so formed that they are not of equal length. EVEN BASTING STITCH.—Start with a knot in basting and always have it on the right side; it is more easily removed.
    [Show full text]
  • Dress with Slanted Closure
    Lekala 2063 Dress With Slanted Closure Dress With Slanted Closure - Sewing Pattern #2063 Recommendations on fabric: natural/mixed fabric suitable for dresses. You will also need: fusible interfacing; 5 buttons; 1 inner button. Seam allowances: seam allowance for hem of garment — 2.0 cm, other seams – 1.0 cm. Note on seam allowances: - If the pattern has double contour the seam allowances are included. They are 1 cm unless specified otherwise. - If the pattern has single contour, the seam allowances are NOT included and need to be added when laying out the pattern. Note on length of fabric: Attention! The amount of fabric needed for your pattern is not included. It will depend on the selected pattern size, the width, and design of the fabric you plan to use. First, print all the paper patterns and lay them out at the width of fabric you plan to use (usually from 90 to 150 cm). Measure how much fabric you will need. Don't forget to account for pieces that need to be cut multiple times and pieces that are cut on the fold. CUTTING: Note on cutting: On the pattern pieces, “beam” means straight of grain. Lay out your pieces accordingly. Some pieces will be cut on the fold. This is noted on the pattern piece. Mark all notches and other design features such as pleats etc. from the pattern onto your fabric. When sewing the garment, pay attention to notches, they must match up. Main fabric: 1. Center back – cut 2 2. Side back — cut 2 3. Side front — cut 2 4.
    [Show full text]
  • 80739083.Pdf
    3-~"'81 8-1355 ~.(O~ All About ... • Pattern Selection • Fabric Selection • Contemporary Techniques • Fusible Interfacings • Finishing Tips CONTENTS Page Pattern Selection. ............................................... .. 3 Fabric Selection ................................................ .. 3 Notions. ....................................................... .. 3 Pressing Points ................................................. .. 4 Inner Fabrics. .................................................. .. 4 Underlining. ................................................. .. 4 Interfacing. .................................................. .. 4 Lining. ..................................................... .. 5 Preparation ............................................ .. 5 Fabric. ...................................................... .. 5 Pattern Fit. .................................................. .. 5 Cutting and Marking. ......................................... .. 5 Comparison of Custom and Contemporary Tailoring Techniques. ...... .. 5 Front and Back Interfacing. ...................................... .. 5 Fusible Method-Front. ...................................... .. 5 onfusible Method-Back Reinforcement. ....................... .. 6 One-Piece Method. ........................................ .. 6 Two-Piece Method ......................................... .. 6 Applying Back Reinforcement .................................. .. 7 Lapel and Roll Line ............................................. .. 7 Marking the Roll Line , 8 Taping the
    [Show full text]
  • BANASCH's INC. 603 Brooklyn Ave
    Banasch’s Inc. www.banaschs.com FAMILY OWNED AND OPERATED SINCE 1910 Sewing Supplies, Notions, Sewing Equipment, Irons, Pressing Equipment, Hangers, Poly, Garment Rack, Heat Seal/Mending Tapes and much more! We specialize in providing our customers with quality products and quality service. We strive to be your single source vendor. 603 BROOKLYN AVE. STE. B MILFORD, OH 45150 www.banaschs.com Phone: 513-731-2040 Toll free phone: 800-543-0355 Fax: 513-731-2090 Toll free fax: 866-417-2090 www.banaschs.com Phone: 513-731-2040 Toll free phone: 800-543-0355 Fax: 513-731-2090 Toll free fax: 866-417-2090 Banasch’s is located at 603 Brooklyn Avenue, Suite B, Milford, Ohio 45150. We have been in business since 1910 providing quality products with competitive prices. We strive to be your single source sewing supply and sewing equipment vendor. We proudly staff knowledgeable people with many years of product knowledge and know how in the garment industry. Please don’t hesitate to contact us with any questions on supplies or equipment. How to place an order: Our sales staff and customer service are available Monday thru Friday from 8:30am to 5:30pm EST. We are always happy to take your order over the phone. We can accept your order also via mail, fax, e-mail, e-commerce from our website. Our website address is: www.banaschs.com Please use our order form in our catalog to prepare your order before calling or sending it to us. Our phone numbers are: 513-731-2040 or toll free 800-543-0355 Our fax phone numbers are: 513-731-2090 or toll free fax 866-417-2090 You can e-mail your order to: [email protected] Please be sure to specify the sizes, colors, quantities, style numbers and name or description of item.
    [Show full text]
  • Berry & Company
    i-K-rrr.j^ - ENDS ^^'•' EsTABUSHED 1893.—No. I 227. CRANFORD. UNION COUNTY, N. J.. THURSDAY, APRIL 21. 1910 PRICE 3 CENTS ued. to Henry •••>•••>•••••) +.»••••••• •«•>.». *» the bam . Special Notices. CRANFORD LOCALS TOWNSHIP COMMITTEE IN THE WOMEN'S CLUBS y Money to loan on bond and i =-=-., Th..a~ Ladies~...... ' Ai...»d. Societyu«.......j, o«f* th...e » The Township Committee i.-.M a The last programme meeting of the Mwter Frank:!!. Paret Realty Co ^ Chronicle] l>re8byterian church held its annual regular meeting, last night, at -.vhich Wednesday Morning Club for 1909-10 election yesterday,, and .the fallowing the first .matter, taken.up wasi. ietior. Harry S BERRY & COMPANY For rent: u lar(;c funiish:«l :r»»ins was held yesterday morning, with JjwrnaL: bit-, fotiigliti eepliiBLJi'Mrew'* \U" serve for tho ensuing year from William M.r Sperry, askii.4 ihjit Mra. Hansel presiding-. - The first Cl^ Seventh _ street, ^between N01 inndy paper of the day was on "Thibet the which, and then ^ J- Pupils wanted for French, Gcnnaui Pi- ner; vice-presidents, Mra. P. West, PiAiiH barb** ' 'M'iiftf'wiifterfbyb - —-'•• entering the ^ ano. Knglish branches anil Chip Oarving; Mrs. Culin, and Mrs, Grainard; secre- It was brought out that this street Mrs. Jowler. This was followed by % bit the Jaijtj/ aiJJress Miss E. M. llowen, 14 Cranfonl tary, Mrs; Ponistorrt-treasurer. Mrs. hadnever been opened, and thi. Mr. avenue, Cranfortl, N. J. • ;i-talk on "Travelirig'in Thibet," by who was »t di Morton. - ^ Sp.crry^owncd_vll the land on -both aides Mra. Johnson. Cuts showing the" nnet For Sale: Beautiful new lu'no room hoiiw, the mouth of til Dry Goods, Notions, Stationery ull improveineuts and eonvenienceti; quar- .! Ridgely Folk made on Friday the of it.
    [Show full text]
  • Town of Lapel, Indiana
    TOWN OF LAPEL, INDIANA CODE OF ORDINANCES PREPARED BY MADISON COUNTY COUNCIL OF GOVERNMENTS 2007 TABLE OF CONTENTS CHAPTER 1 IMPLEMENTARY PROVISIONS FOR THE LAPEL CODE ..................................... 1 SEC. 1-1 SHORT TITLE ......................................................................................................... 1 SEC. 1-2 REPEAL OF PRIOR ORDINANCES: ........................................................................ 1 SEC. 1-4 EFFECT OF REPEAL: ............................................................................................... 1 SEC. 1-5 CONSTRUCTION OF CODE: ................................................................................ 1 SEC. 1-6 PRESERVATION OF PENALTIES, OFFENSES, RIGHTS AND LIABILITIES: .......... 2 SEC. 1-7 LIMITATION PERIODS: ......................................................................................... 3 SEC. 1-8 SEVERABILITY: ....................................................................................................... 3 SEC. 1-9 EFFECTIVE DATE:................................................................................................... 3 SEC. 1-10 LAWS GOVERNING THE MUNICIPALITY ........................................................ 4 SEC. 1-11 PROCLAMATION OF CODE: ................................................................................ 4 SEC. 1-12 CONSTRUCTION OF CODE: ................................................................................ 4 SEC. 1-13 EFFECT OF REPEAL: ..............................................................................................
    [Show full text]
  • 48875®Conversor Listenor Pro User Guide
    48875®Conversor Listenor Pro User Guide 8/1/13 13 48875®Conversor Listenor Pro User Guide 8/1/13 13 Table of Contents Welcome! 3 Listenor Pro overview 4 Safety Information 5 Getting started 6 Everyday use 7 Using with earphones or headphones 8 Using with an inductive loop 8 Attaching the belt clip 9 Sockets and connections 10 Using the neck lanyard 12 Care instructions 13 Repair and service centres 13 Troubleshooting 14 Manufacturer’s warranty 15 Statements of compliance and conformity 17 © Copyright 2013 Conversor Limited. All rights reserve 48875®Conversor Listenor Pro User Guide 8/1/13 13 Welcome! Thank you for your purchase of Listenor Pro, a versatile high quality Assistive Listening Device which enhances the clarity of sound in a variety of everyday situations made by Conversor Limited. Listenor Pro is not sold, advertised, or intended for use as a personal hearing aid. Conversor recommends that any individual experiencing hearing loss be examined by a physician to determine the cause before using amplification. Listenor Pro includes the following: • Listenor Pro • 2 AAA Batteries • Detachable Belt Clip • Earphones or headphones Optional accessories not included (with order code) • PROV1LTK - Telephone Connector • CON01MM1 - Directional microphone • PROV1LAU - Audio Jack Cable • PROV1LTV - TV Cable • SUB01IND - Inductive Neck Loop • CON01HDP – Headphones • CON01EAR – Earphones • PROV1CPR – Conversor Pro Recorder To order any of the optional accessories locate your local dealer on the Conversor website www.conversorproducts.com, purchase from the Conversor website shop, or contact Conversor at [email protected] using the order codes above. 3 48875®Conversor Listenor Pro User Guide 8/1/13 13 Listenor Pro overview Socket for ON/OFF button earphones, in the centre headphones or inductive loop Tone control Microphone buttons Socket for audio cable and directional Neck Lanyard hook microphone Volume control buttons Top view Belt clip locating tongue Belt/lapel clip Belt clip grooves.
    [Show full text]
  • Wear of the Army Green Service Uniform DCS G-1 Uniform Policy Branch SGM Brian Sanders / MSG Quintana Mitchell March 2021
    Wear of the Army Green Service Uniform DCS G-1 Uniform Policy Branch SGM Brian Sanders / MSG Quintana Mitchell March 2021 1 Female Soldier Uniform Standards The necktie is tied so it is no shorter than 2 inches above the top of the belt buckle and so it does not extend past the bottom of the belt buckle. The AGSU Coat Belt will always face to the right of the Female Soldier 2 2 Female Officer US Insignia: On the AGSU coat, officers wear the U.S. insignia 5/8 inch above Grade Insignia: On the AGSU coat, all- the notch on both collars with the weather coat, and windbreaker, officer centerline of the insignia bisecting the grade insignia is worn on the shoulder notch and parallel to the inside edge of loops, 5/8 inch from the outside shoulder the lapel. seam, and centered front to back. All officers will wear pin-on grade insignia on the shoulders of the AGSU coat. Branch Insignia: On the AGSU coat, officers wear their branch insignia centered on both lapels approximately SSI – MOHC: Authorized personnel may 1 – 1/4 inches below the U.S. insignia. wear the nonsubdued SSI – MOHC on the The branch insignia is positioned so that right sleeve of the AGSU coat for all the centerline of the insignia bisects the personnel. The insignia will be worn centerline of the U.S. insignia and is centered 1/2 inch below the top of the parallel to the inside edge of the lapel. right shoulder seam. RDI: Soldiers wear the RDI centered 1/8 inch above the top of the pocket flap or 1/4 inch above any unit awards or ID badges: Worn centered with the foreign badges that are worn.
    [Show full text]
  • Designoptions Make
    DesignOptions Make Handwork in ‘Traditional’ make: Button attachment Collar attachment Bottom lining/facing Flower loop Make Traditional Unconstructed Closure & Lapel 3 Btn Notch Lapel 3 Btn Notch Lapel with Contrast Collar 3 Btn Fly Front 3 Btn Fly Front with Notch Lapel with Notch Lapel & Contrast Collar Closure & Lapel 3 Btn with Peak Lapel 3 Btn with Peak Lapel & Contrast Collar 3 Btn Fly Front 3 Btn Fly Front with Peak Lapel with Peak Lapel & Contrast Collar Closure & Lapel 6 Btn Double Breasted 6 Btn Double Breasted with Contrast Collar 2 Btn Notch Lapel Closure & Lapel 2 Btn Notch Lapel 2 Btn Notch Lapel with Contrast Collar 2 Btn with Peak Lapel 2 Btn with Peak Lapel & Contrast Collar Closure & Lapel Zipper Closure Side Pockets Flap Straight Flap Slanted Patch with Flap Patch Round Side Pockets Welted Narrow(4.5cm) Welted Ticket Pockets Flap Straight Flap Slanted None Chest Pockets Welted Patch Round None Vents Center [1] Center [1] with Back Self Fabric Belt Cuff Finishing 4 Open 4 Closed Cuff Finishing 5 Open 5 Closed Cuff Tab Yes N/A Sleeve Button Spacing Kissing Non Kissing Without Buttonholes Pick Stitching None 6mm / 1/4in Pick Stitching 11mm / 1/2in 6mm full / 1/4in 11mm full / 1/2in Shoulder Type Traditional Unconstructed Shoulder Tab Yes N/A Interrior Construction Classic with Fabric Jetted Pockets Unlined with Fabric Facing Mobile Phone Pocket Yes No Melton Undercollar Fabric Melton Suede Monogram Under Collar Monogram Inerior Position (Monogram on Lining) Jet Unlined Monogram Inerior Position (Monogram on Label) Jet Unlined.
    [Show full text]
  • Facilitating Methodologies for the Design of Collars with Lapels and Shawl Collars with Dimensions, Equal Or Larger
    Trakia Journal of Sciences, Vol. 4, No. 4, pp 65-69, 2006 Copyright © 2007 Trakia University Available online at: http://www.uni-sz.bg ISSN 1312-1723 Original Contribution FACILITATING METHODOLOGIES FOR THE DESIGN OF COLLARS WITH LAPELS AND SHAWL COLLARS WITH DIMENSIONS, EQUAL OR LARGER Zl. Kazlacheva* Trakia University of Stara Zagora, Technical College of Yambol ABSTRACT The diversity of models in the design of collars with lapels and shawl collars depends on the following: shape of collar curves and the lapel (shawl collar), shape and size of collar and lapel, collar height, neckline depth, shawl collar, break point and the extension for buttons. A study of the design of the collars with lapels and shawl collars with various dimensions has been made based on the methodologies for constructing collars with lapels and shawl collars with dimensions relative to the shoulders. There was no correlation between design and constructional elements. This observation provided a new basis for using multiple linear progression to obtain an effect of collar slope on the following interactions: neckline depth, shawl collar, break point, and button extension. Further study was made with the aim of simplifying the formula. Thus the depth of the neckline, shawl collar, break point, and the extension for buttons showed the roll line and its slope with a defined slope of collar by the angle on slope of the roll line. Key words: design, constructing, collars with lapels, shawl collars INTRODUCTION with lapels and shawl collars in various dimensions on the basis of transformation of The last fashion trends (season fall-winter methodology (4) and traditional modes of 2006-2007) introduced ladies’ garments with constructing this kind of collars with small collars having lapels and shawl collars of dimensions, and investigation of the various dimensions relative to the shoulders1 interaction of the design and constructional Often clothes with this kind of collar stay only elements.
    [Show full text]