open, closed, locked
Access Control
Product Catalogue
ASSA ABLOY is the world’s leading manufacturer and supplier of locking solutions, meeting tough end-user demands for safety, security and user friendliness. The Group has some 30,000 employees and annual sales of about EUR 3 billion.
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 Email: [email protected] Web site: www.adamsrite.co.uk October 2008 (Issue 8) ©Adams Rite Europe Limited. All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company An ASSA ABLOY Group company 3 4 Key Index
A T S Denotes suitability for Aluminium, Timber and/or Steel installation. Electric Strikes 7100 Electric Strike for Single Leaf Aluminium Doors...... 4 7101 Electric Strike for Double Leaf Aluminium Doors...... 6 7108 & 7128 Electric Strike...... 8 Handing of doors 7130 Electric Strike for MS®1850 Replacement – Aluminium Doors...... 10 7160 Electric Strike for Single Leaf Aluminium Doors ...... 12 The description of swinging door operation 7110 Electric Strike for Single or Double Leaf Timber or Steel Doors...... 14 always viewed from the outside. 7113 Electric Strike for Single or Double Leaf Timber or Steel Doors...... 16 Left Hand: Door hinges on left. 7140 Electric Strike for Single or Double Leaf Steel Doors...... 18 Right Hand: Door hinges on right. 7170 Electric Strike for Single or Double Leaf Timber or Steel Doors...... 20 7181 Electric Strike with Steel Wraparound Faceplate (for Timber)...... 22
Direct-Pull Magnets, Shearlocks and Solenoid Bolts Armlock® 261 & 262 Direct-Pull Magnets...... 24 Accessories: ‘L’ & ‘Z’ Brackets for Armlock® 261 & 262...... 26 Accessories: ‘L’ & ‘Z’ Brackets with Cover Plates for Armlock® 261 & 262...... 28 Accessories: Armature Housing for Armlock® 261 & 262...... 30 Armlock® 281 Direct-Pull Magnet...... 32 Accessories: ‘L’ & ‘Z’ Brackets for Armlock® 281...... 34 Accessories: ‘L’ & ‘Z’ Brackets with Cover Plates for Armlock® 281...... 36 Armlock® 291 External Magnet...... 38 MS Maglock Magnetic and Mechanical Lock...... 40 Armlock® 1354 Mini Electro-Shearmagnet...... 42 1391 Electric Solenoid Bolt...... 44 Surface Box for the 1391 Electric Solenoid Bolt...... 46
Ancillary Hardware 4591M & 999M Monitored Paddle Handle & Exit Device Switching Accessories...... 48 4593 & 4593E Standard and Electrified Latch Pull...... 50 3080 & 3080E Series Standard and Electrified Entry Trims...... 52 RiteKey Keypad...... 54 Accessories: Door Loop and Push-to-Exit Button...... 56 Power Supply Unit with Battery Back-up...... 58 5 Dimensions Ordering Codes Matrix 6
7100 7100 - 3 1 0 - 628 - 1
Electric Strike for Single Leaf Aluminium Doors Model Number 7100 Flat A Voltage 3 12 volt 5 24 volt Current and Duty 1 DC Continuous Function or intermittent For remote access control of any narrow stile aluminium door equipped with Adams Rite 4700 series (or similar) 4 AC Intermittent (fail-secure only) deadlatch. Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without Features 0 Standard/Fail-Secure operating the latch itself. The compact mechanism fits into an aluminium jamb section as shallow as 44.45mm. The 5 Standard/Fail-Safe 7100 Series have flat faceplates for mounting in the frame of single action single leaf doors - for single action pairs 7 Monitored/Fail-Safe of doors (radius nose/faceplate), specify the 7101 Series (see page 6). 9 Monitored/Fail-Secure Finish Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. 628 Satin Aluminium 605 Bright Brass 612 Satin Bronze 613 Oil Bronze 313 Bronze 335 Black Options 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid) Subcover Extension Codes (order separately) Order Code Dimension* Order Code Dimension* Specifications 91-0171-01 38.1mm (1.50”) 91-0171-08 60.5mm (2.38”) 91-0171-02 41.4mm (1.63”) 91-0171-09 63.5mm (2.50”) Current Draw: 12vAC=1.48A, 12vDC=0.332A, 91-0171-03 44.5mm (1.75”) 91-0171-10 66.8mm (2.63”) 24vAC=0.74A, 24vDC=0.19A (nominal). 91-0171-04 47.8mm (1.88”) 91-0171-11 69.9mm (2.75”) 91-0171-05 50.8mm (2.00”) 91-0171-12 73.2mm (2.88”) DC intermittent and continuous units are silent, 91-0171-06 54.1mm (2.13”) 91-0171-13 76.2mm (3.00”) 91-0171-07 57.2mm (2.25”) AC intermittent units “buzz” on operation. *Dimension from door centreline to jamb edge. Voltage Tolerance: ±10%. Powered By: Internal solenoid. Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. Duty: Fail-safe or fail-secure (convertible without additional parts). DC power supply required for fail-safe operation. Jaw Strength: 907kg (2000lbs). Related Hardware Case: 85.6mm x 28.6mm x 41.6mm. Zinc aluminium alloy. RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) ~ 4710 Deadlatch ~ 4750 Deadlatch Mechanism: Stainless steel internal blocking mechanism. Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Aluminium. 123.7mm x 31.8mm. Flat. Finishes: See ordering codes. Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4”) thick door that closes flush with jamb edge. For extended bolt-on subcovers see ordering codes. Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 7 Dimensions Ordering Codes Matrix 8
7101 7101 - 3 1 0 - 628 - 1
Electric Strike for Double Leaf Aluminium Doors Model Number 7101 Radius A Voltage 3 12 volt 5 24 volt Current and Duty 1 DC Continuous Function or intermittent For remote access control of any narrow stile aluminium door equipped with Adams Rite 4700 series (or similar) 4 AC Intermittent (fail-secure only) deadlatch. Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without Features 0 Standard/Fail-Secure operating the latch itself. The compact mechanism fits into an aluminium door section as shallow as 44.45mm. 5 Standard/Fail-Safe 7 Monitored/Fail-Safe Virtually identical to the 7100 Series, the 7101 has a radiused faceplate for mounting in the rounded nose in the 9 Monitored/Fail-Secure inactive leaf of paired doors. Finish 628 Satin Aluminium Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. 605 Bright Brass 612 Satin Bronze 613 Oil Bronze 313 Bronze 335 Black Options 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid)
Specifications Current Draw: 12vAC=1.48A, 12vDC=0.332A, 24vAC=0.74A, 24vDC=0.19A (nominal). DC intermittent and continuous units are silent, AC intermittent units “buzz” on operation. Voltage Tolerance: ±10%. Powered By: Internal solenoid. Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. Duty: Fail-safe or fail-secure (convertible without additional parts). DC power supply required for fail-safe operation. Jaw Strength: 907kg (2000lbs). Related Hardware Case: 85.6mm x 28.6mm x 41.6mm. Zinc aluminium alloy. RiteKey Keypad (p54) ~ Door Loop and Push-to-Exit Button (p56) ~ Power Supply Unit (p58) Mechanism: Stainless steel internal blocking mechanism. 4710 Deadlatch ~ 4750 Deadlatch Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Aluminium. 123.7mm x 31.8mm. Radiused. Finishes: See ordering codes. Subcover: Subcover lip will suit a 44.45mm (1 3⁄4”) thick door. Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 9 Dimensions Ordering Codes Matrix 10
7108 & 7128 7108 - 3 1 0 - 628 - 1 39.5 Electric Strike 31.8 Model Number 25.1 5.8 7108 for 940 Exit Device A T S 7128 for 930 Exit Device Voltage 3 12 volt
42.5 5 24 volt 34.1 Current and Duty Function 17.4 1 DC Continuous For remote access control of any narrow stile aluminium or timber/steel door where conformance to BS EN 1125 or intermittent 45.4 4 AC Intermittent (fail-secure only) or BS EN 179 is required. Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened Features without operating the latch itself. The compact mechanism fits into a jamb section as shallow as 44.45mm. 31.8 2.4 0 Standard/Fail-Secure R 3.9 (7108 ONLY) 5 Standard/Fail-Safe The 7108 Series have flat faceplates for mounting in the frame of single action, single leaf aluminium doors; for 7 Monitored/Fail-Safe single leaf, single action timber/steel doors, specify the 7128 Series. 9 Monitored/Fail-Secure
® Finish Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. 628 Satin Aluminium ADAMS RITE 605 Bright Brass 612 Satin Bronze 613 Oil Bronze 313 Bronze Specifications 335 Black Options 85.6 85.6 Current Draw: 12vAC=1.48A, 12vDC=0.332A, 104.8 123.7 1 Single Monitoring (Latch only) 24vAC=0.74A, 24vDC=0.19A (nominal). 2 Double Monitoring (Latch and Solenoid) DC intermittent and continuous units are silent, Subcover Extension Codes (order separately)
Order Code Dimension* Order Code Dimension* AC intermittent units “buzz” on operation. RITE ADAMS 91-0173-01 38.1mm (1.50”) 91-0173-08 60.5mm (2.38”) Voltage Tolerance: ±10%. 91-0173-02 41.4mm (1.63”) 91-0173-09 63.5mm (2.50”) 91-0173-03 44.5mm (1.75”) 91-0173-10 66.8mm (2.63”)
Powered By: Internal solenoid. ® 91-0173-04 47.8mm (1.88”) 91-0173-11 69.9mm (2.75”) 91-0173-05 50.8mm (2.00”) 91-0173-12 73.2mm (2.88”) Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. 91-0173-06 54.1mm (2.13”) 91-0173-13 76.2mm (3.00”) Duty: Fail-safe or fail-secure (convertible without additional parts). 91-0173-07 57.2mm (2.25”) *Dimension from door centreline to jamb edge. DC power supply required for fail-safe operation. Jaw Strength: 907kg (2000lbs). Case: 85.6mm x 31.8mm x 42.5mm. Zinc aluminium alloy. Mechanism: Stainless steel internal blocking mechanism. Strike Opening: 36.5mm x 15.9mm x 12.7mm. Related Hardware Architectural bronze bolt retainer jaw. RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Aluminium. 123.7mm x 31.8mm. Flat. 4710 Heavy Duty Deadlatch ~ 4720ANSI Deadlatch ~ 4750 Deadlatch ~ 4591 Paddle Handle (7108 has radius corners, 7128 has square corners). 4596 Europrofile Operation Paddle Handle ~ 930 Exit Device ~ 940 Exit Device Finishes: See ordering codes. Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4”) thick door that closes flush with jamb edge. For extended bolt-on subcovers see ordering codes. Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
Standards Conformity To conform with BS EN 1125: 1997+A1:2001: The 7108 or 7128 strikes must be used with the 930 or 940 Series Exit Device
To conform with BS EN 179: 1998 +A1:2001: The 7108 or 7128 strikes must be used with the: 4710 Heavy Duty Deadlatch or 4720ANSI Deadlatch and 4591 Push Paddle Handle 4750 Heavy Duty Deadlatch and 4596 Push Paddle Handle
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 11 Dimensions Ordering Codes Matrix 12
7130 7130 - 3 1 0 - 628 - 1
Electric Strike for MS®1850 replacement - Aluminium Doors Model Number 7130 Flat A 7131 Radius Voltage 3 12 volt 5 24 volt Current and Duty Function 1 DC Continuous For remote access control of any narrow stile, aluminium door equipped with Adams Rite 4700 series (or similar) or intermittent 4 AC Intermittent (fail-secure only) deadlatch. Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without Features operating the latch itself. The compact mechanism fits into an aluminium jamb section as shallow as 44.45mm whilst 0 Standard/Fail-Secure still retaining the existing face cutout detail (faceplate and subcover) of the 7830 Series. 5 Standard/Fail-Safe 7 Monitored/Fail-Safe The 7130 Series strikes have a large flat faceplate to cover the strike opening when converting from an MS® 9 Monitored/Fail-Secure pivoted-bolt deadlock to a deadlatch, and are designed for mounting in the frame of single action single leaf Finish 628 Satin Aluminium doors - for single action pairs of doors with radius nosed faceplate, specify the 7131 Series. 605 Bright Brass 612 Satin Bronze Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. 613 Oil Bronze 313 Bronze 335 Black Options 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid) Subcover Extension Codes (order separately) Specifications Order Code Dimension* Order Code Dimension* 91-0171-01 38.1mm (1.50”) 91-0171-08 60.5mm (2.38”) Current Draw: 12vAC=1.48A, 12vDC=0.332A 91-0171-02 41.4mm (1.63”) 91-0171-09 63.5mm (2.50”) 24vAC=0.74A, 24vDC=0.19A (nominal). 91-0171-03 44.5mm (1.75”) 91-0171-10 66.8mm (2.63”) 91-0171-04 47.8mm (1.88”) 91-0171-11 69.9mm (2.75”) DC intermittent and continuous units are silent, 91-0171-05 50.8mm (2.00”) 91-0171-12 73.2mm (2.88”) 91-0171-06 54.1mm (2.13”) 91-0171-13 76.2mm (3.00”) AC intermittent units “buzz” on operation. 91-0171-07 57.2mm (2.25”) Voltage Tolerance: ±10%. *Dimension from door centreline to jamb edge. Not available on 7131. Powered By: Internal solenoid. Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. Duty: Fail-safe or fail-secure (convertible without additional parts). DC power supply required for fail-safe operation. Jaw Strength: 907kg (2000lbs). Case: 85.6mm x 28.6mm x 41.6mm. Zinc aluminium alloy. Mechanism: Stainless steel internal blocking mechanism. Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Related Hardware Faceplate: Aluminium. 174.5mm x 31.8mm. Flat. RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) ~ 4710 Deadlatch ~ 4750 Deadlatch Finishes: See ordering codes. Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4”) thick door that closes flush with jamb edge. For extended bolt-on subcovers see ordering codes (7130 only). Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 13 Dimensions Ordering Codes Matrix 14
7160 7160 - 3 1 0 - 628 - 1
Electric Strike for Single Leaf Aluminium Doors Model Number 7160 Flat A Voltage 3 12 volt 5 24 volt Current and Duty 1 DC Continuous Function or intermittent For remote access control of any narrow stile aluminium door and will accomodate a latch throw of up to 19.05mm. 4 AC Intermittent (fail-secure only) Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the Features 0 Standard/Fail-Secure latch itself. The compact mechanism fits into a hollow jamb section as shallow as 47mm. 5 Standard/Fail-Safe 7 Monitored/Fail-Safe For aluminium jambs opposite 940 Exit Devices, specify the 7108 Series (see page 8). 9 Monitored/Fail-Secure
Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. Finish 628 Satin Aluminium 605 Bright Brass 612 Satin Bronze 613 Oil Bronze 313 Bronze 335 Black Options 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid) Specifications Subcover Extension Codes (order separately) Order Code Dimension* Order Code Dimension* Current Draw: 12vAC=1.48A, 12vDC=0.332A, 91-0172-01 38.1mm (1.50”) 91-0172-08 60.5mm (2.38”) 24vAC=0.74A, 24vDC=0.19A (nominal). 91-0172-02 41.4mm (1.63”) 91-0172-09 63.5mm (2.50”) 91-0172-03 44.5mm (1.75”) 91-0172-10 66.8mm (2.63”) DC intermittent and continuous units are silent, 91-0172-04 47.8mm (1.88”) 91-0172-11 69.9mm (2.75”) AC intermittent units “buzz” on operation. 91-0172-05 50.8mm (2.00”) 91-0172-12 73.2mm (2.88”) 91-0172-06 54.1mm (2.13”) 91-0172-13 76.2mm (3.00”) Voltage Tolerance: ±10%. 91-0172-07 57.2mm (2.25”) *Dimension from door centreline to jamb edge. Powered By: Internal solenoid. Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. Duty: Fail-safe or fail-secure (convertible without additional parts). DC power supply required for fail-safe operation. Jaw Strength: 907kg (2000lbs). Case: 85.6mm x 31.8mm x 46.4mm. Zinc aluminium alloy. Related Hardware Mechanism: Stainless steel internal blocking mechanism. RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) Strike Opening: 36.5mm x 19.1mm x 19.1mm. Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Aluminium. 123.7mm x 31.8mm. Flat. Finishes: See ordering codes. Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4”) thick door that closes flush with jamb edge. For extended bolt-on subcovers see ordering codes. Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 15 Dimensions Ordering Codes Matrix 16
7110 7110 - 3 1 0 - 652 - 1
Electric Strike for Single or Double Leaf Timber or Steel Doors Model Number 7110 8” Faceplate T S 7111 10” Faceplate Voltage 3 12 volt 5 24 volt Current and Duty Function 1 DC Continuous For remote access control of any timber or steel door equipped with Adams Rite 4700 series (or similar) deadlatch. or intermittent 4 AC Intermittent (fail-secure only) Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the Features latch itself. The compact mechanism fits into a timber or steel jamb section as shallow as 44.45mm. 0 Standard/Fail-Secure 5 Standard/Fail-Safe The 7110 Series Electric Strike has a flat faceplate for mounting in the frame or the inactive leaf of a pair of doors. 7 Monitored/Fail-Safe Should a narrower faceplate be required please specify 7113 (see page 16). 9 Monitored/Fail-Secure Finish Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. 652 Satin Chrome 605 Bright Brass 612 Satin Bronze 613 Oil Bronze Options 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid) Subcover Extension Codes (order separately) Specifications Order Code Dimension* Order Code Dimension* 91-0171-01 38.1mm (1.50”) 91-0171-08 60.5mm (2.38”) Current Draw: 12vAC=1.48A, 12vDC=0.332A, 91-0171-02 41.4mm (1.63”) 91-0171-09 63.5mm (2.50”) 91-0171-03 44.5mm (1.75”) 91-0171-10 66.8mm (2.63”) 24vAC=0.74A, 24vDC=0.19A (nominal). 91-0171-04 47.8mm (1.88”) 91-0171-11 69.9mm (2.75”) DC intermittent and continuous units are silent, 91-0171-05 50.8mm (2.00”) 91-0171-12 73.2mm (2.88”) 91-0171-06 54.1mm (2.13”) 91-0171-13 76.2mm (3.00”) AC intermittent units “buzz” on operation. 91-0171-07 57.2mm (2.25”) Voltage Tolerance: ±10%. *Dimension from door centreline to jamb edge. Powered By: Internal solenoid. Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. Duty: Fail-safe or fail-secure (convertible without additional parts). DC power supply required for fail-safe operation. Jaw Strength: 907kg (2000lbs). Case: 85.6mm x 28.6mm x 41.6mm. Zinc aluminium alloy. Mechanism: Stainless steel internal blocking mechanism. Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Aluminium. 201.6mm x 36.3mm (7110), 260.3mm x 36.3mm (7111). Finishes: See ordering codes. Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4”) thick door that closes flush with jamb edge. For extended bolt-on subcovers see ordering codes. Related Hardware Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance. RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) ~ 4720ANSI Deadlatch
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 17 Dimensions Ordering Codes Matrix 18
7113 7113 - 3 1 0 - 652 - 1 37.1 28.6 Electric Strike for Single or Double Leaf Timber or Steel Doors Model Number 25.1 8.1 7113 8” Narrow Faceplate T S Voltage 3 12 volt 5 24 volt 41.6 Current and Duty 27 1 DC Continuous Function 16.5 or intermittent 4 AC Intermittent (fail-secure only) Featuring a narrower faceplate than the 7110 Series, the 7113 is particularly suited to 44mm thick timber doors. 45.3 The strike can be mounted in the frame or the inactive leaf of a pair of doors and a modified subcover is available as an Features 0 Standard/Fail-Secure 31.8 option for applications using a T-bar on the door. 2.4 5 Standard/Fail-Safe 7 Monitored/Fail-Safe Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. 9 Monitored/Fail-Secure Finish 652 Satin Chrome Options 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid) Subcover Extension Codes (order separately) Order Code Dimension* Order Code Dimension* ® 91-0171-01 38.1mm (1.50”) 91-0171-08 60.5mm (2.38”) Specifications 91-0171-02 41.4mm (1.63”) 91-0171-09 63.5mm (2.50”) 91-0171-03 44.5mm (1.75”) 91-0171-10 66.8mm (2.63”) Current Draw: 12vAC=1.48A, 12vDC=0.332A, ADAMS RITE 91-0171-04 47.8mm (1.88”) 91-0171-11 69.9mm (2.75”) 24vAC=0.74A, 24vDC=0.19A (nominal). 91-0171-05 50.8mm (2.00”) 91-0171-12 73.2mm (2.88”) 91-0171-06 54.1mm (2.13”) 91-0171-13 76.2mm (3.00”) DC intermittent and continuous units are silent, 91-0171-07 57.2mm (2.25”) AC intermittent units “buzz” on operation. *Dimension from door centreline to jamb edge. Voltage Tolerance: ±10%. 85.6 85.6 201.6 Powered By: Internal solenoid. 188.9 Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. Duty: Fail-safe or fail-secure (convertible without additional parts).
DC power supply required for fail-safe operation. RITE ADAMS
Jaw Strength: 907kg (2000lbs). ® Case: 85.6mm x 28.6mm x 41.6mm. Zinc aluminium alloy. Mechanism: Stainless steel internal blocking mechanism. Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Steel. 201.6mm x 31.8mm. Flat, square cornered. Finishes: Satin chrome (other finishes may be available on request). Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4”) thick door that closes flush with jamb edge. For extended bolt-on subcovers see ordering codes. Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance. Related Hardware RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) ~ 4720ANSI Deadlatch
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 19 Dimensions Ordering Codes Matrix 20
7140 7140 - 3 1 0 - 628 - 1
Electric Strike for Single or Double Leaf Steel Doors Model Number 7140 Flat S Voltage 3 12 volt 5 24 volt Current and Duty 1 DC Continuous Function or intermittent For remote access control of any steel door equipped with Adams Rite 4700 Series (or similar) deadlatches. Electrical 4 AC Intermittent (fail-secure only) actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself. Features 0 Standard/Fail-Secure The compact mechanism fits into a jamb section as shallow as 44.45mm. 5 Standard/Fail-Safe 7 Monitored/Fail-Safe Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. 9 Monitored/Fail-Secure Finish 628 Satin Aluminium 605 Bright Brass 612 Satin Bronze 613 Oil Bronze 313 Bronze 335 Black Options 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid) Subcover Extension Codes (order separately) Order Code Dimension* Order Code Dimension* Specifications 91-0171-01 38.1mm (1.50”) 91-0171-08 60.5mm (2.38”) 91-0171-02 41.4mm (1.63”) 91-0171-09 63.5mm (2.50”) Current Draw: 12vAC=1.48A, 12vDC=0.332A, 91-0171-03 44.5mm (1.75”) 91-0171-10 66.8mm (2.63”) 24vAC=0.74A, 24vDC=0.19A (nominal). 91-0171-04 47.8mm (1.88”) 91-0171-11 69.9mm (2.75”) 91-0171-05 50.8mm (2.00”) 91-0171-12 73.2mm (2.88”) DC intermittent and continuous units are silent, 91-0171-06 54.1mm (2.13”) 91-0171-13 76.2mm (3.00”) 91-0171-07 57.2mm (2.25”) AC intermittent units “buzz” on operation. *Dimension from door centreline to jamb edge. Voltage Tolerance: ±10%. Powered By: Internal solenoid. Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. Duty: Fail-safe or fail-secure (convertible without additional parts). DC power supply required for fail-safe operation. Related Hardware Jaw Strength: 907kg (2000lbs). RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) ~ 4720ANSI Deadlatch Case: 85.6mm x 28.6mm x 41.6mm. Zinc aluminium alloy. Mechanism: Stainless steel internal blocking mechanism. Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Aluminium. 123.7mm x 31.8mm. Flat. Finishes: See ordering codes. Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4”) thick door that closes flush with jamb edge. For extended bolt-on subcovers see ordering codes. Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 21 Dimensions Ordering Codes Matrix 22
7170 7170 - 3 1 0 - 628 - 1
Electric Strike for Single or Double Leaf Timber or Steel Doors Model Number 7170 Flat 7171 10” Faceplate T S 7172 8” Faceplate 7173 8” Narrow Faceplate Voltage 3 12 volt Function 5 24 volt For remote access control of any timber or steel door and will accomodate a latch throw of up to 19.05mm. Electrical Current and Duty 1 DC Continuous actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself. or intermittent The compact mechanism fits into a hollow jamb section as shallow as 47mm. 4 AC Intermittent (fail-secure only) Features For shorter faceplates, specify the 7172 Series (201.6mm x 36.3mm) or the 7173 Series (201.6mm x 31.8mm). 0 Standard/Fail-Secure 5 Standard/Fail-Safe Note: For maximum security specify an MS® Deadlock in conjunction with the electric strike/latch combination. 7 Monitored/Fail-Safe 9 Monitored/Fail-Secure Finish 628 Satin Aluminium (7170 only) 605 Bright Brass (7170 only) 612 Satin Bronze (7170 only) 613 Oil Bronze (7170 only) 313 Bronze (7170 only) 335 Black (7170 only) 652 Satin Chrome (7171/7172/7173) 632 Bright Brass (7171/7172/7173) 639 Satin Bronze (7171/7172 only) Specifications 640 Oil Bronze (7171/7172 only) Current Draw: 12vAC=1.48A, 12vDC=0.332A Options 24vAC=0.74A, 24vDC=0.19A (nominal). 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid) DC intermittent and continuous units are silent, Subcover Extension Codes (order separately) AC intermittent units “buzz” on operation. Order Code Dimension* Order Code Dimension* Voltage Tolerance: ±10%. 91-0172-01 38.1mm (1.50”) 91-0172-08 60.5mm (2.38”) 91-0172-02 41.4mm (1.63”) 91-0172-09 63.5mm (2.50”) Powered By: Internal solenoid. 91-0172-03 44.5mm (1.75”) 91-0172-10 66.8mm (2.63”) 91-0172-04 47.8mm (1.88”) 91-0172-11 69.9mm (2.75”) Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. 91-0172-05 50.8mm (2.00”) 91-0172-12 73.2mm (2.88”) Duty: Fail-safe or fail-secure (convertible without additional parts). 91-0172-06 54.1mm (2.13”) 91-0172-13 76.2mm (3.00”) 91-0172-07 57.2mm (2.25”) DC power supply required for fail-safe operation. *Dimension from door centreline to jamb edge. Jaw Strength: 907kg (2000lbs). Case: 85.6mm x 31.8mm x 41.6mm. Zinc aluminium alloy. Mechanism: Stainless steel internal blocking mechanism. Related Hardware Strike Opening: 36.5mm x 19.1mm x 19.1mm. RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Aluminium. 123.7mm x 31.8mm (7170); 260.3mm x 36.3mm (7171); 201.6mm x 36.3mm (7172); 201.6mm x 31.8mm (7173). Flat. Finishes: See ordering codes. Subcover: Basic subcover lip will suit a 44.45mm (1 3⁄4”) thick door. For extended bolt-on subcovers see ordering codes. Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance.
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 37
25.4 23 Dimensions Ordering Codes Matrix 24 4 7181 7181 - 3 1 0 - 646 - 1
Electric Strike with Steel Wraparound Faceplate (for Timber) Model Number 7181 Flat T Voltage 3 12 volt 5 24 volt Current and Duty 1 DC Continuous ADAMS RITE Function or intermittent For remote access control of any timber doors equipped with Adams Rite 4700 Series (or similar). Electrical 4 AC Intermittent (fail-secure only) actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself. Features 0 Standard/Fail-Secure The compact mechanism fits into a jamb section as shallow as 44.55mm. The design of the steel wraparound faceplate 5 Standard/Fail-Safe helps provide additional protection to the timber door frame in the area of the electric strike. The subcover is flush with 7 Monitored/Fail-Safe the outer face of the steel faceplate and is therefore ideal in situations where a ‘T-Bar’ protection strip is fitted. 9 Monitored/Fail-Secure Finish Note: For maximum security specify an MS®Deadlock in conjunction with electric strike/latch combination. 646 Satin Nickel Options 1 Single Monitoring (Latch only) 2 Double Monitoring (Latch and Solenoid) 302
86.106
Specifications Current Draw: 12vAC=1.48A, 12vDC=0.37A, 24vAC=0.74, 24vDC=0.19A (nominal). DC intermittent and continuous units are silent, AC intermittent units “buzz” on operation. ADAMS RITE Voltage Tolerance: ±10%.
Powered By: Internal solenoid. RITE ADAMS Monitoring: (Optional) Single: Latch only, Double: Latch & solenoid. Duty: Fail-safe or fail secure (convertible without additional parts). DC power supply required for fail-safe operation. Jaw Strength: 907kg (2000lbs). Case: 85.6mm x 28.6mm x 41.7mm Zinc aluminium alloy.
Mechanism: Stainless steel internal blocking mechanism. 37 25.4 Strike Opening: 36.5mm x 15.9mm x 12.7mm. Stainless steel bolt retainer jaw. Door Gap: Minimum 3mm (1⁄8”), operational door gap 3-5mm. Faceplate: Steel armoured forend/faceplate. 302mm x 37mm x 25.4mm return (all models). Flat. Finish: Satin nickel plate on steel. Related Hardware Subcover: The subcover on the 7181 has been designed to suit most ‘T’ bar RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58) ~ 4720 Deadlatch ~ 4750 Deadlatch protection strip applications used on certain security doors.
Standards: ANSI/BHMA 156.5 Grade 1. UL Listed for burglary resistance. Note: Product is non-handed but jaw is offset from horizontal centre line RITE ADAMS when reversed. Product fixings for door frames not included.
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 25 26 Armlock® 261 & 262 Dimensions Direct-Pull Magnets Armlock® 261-005 A T S
Function To facilitate remote access and exit control of any aluminium, timber or steel door. The Armlock® 260 Series combines a compact case size and clean aesthetics whilst maintaining a magnetic holding force of at least 250kg (550lbs). Offering durability and low maintenance, Armlock® 260 Series Magnetic Locks at all times provide positive fail-safe operation (unless power supply continued during power failure by means of battery back-up). Available for outward and inward opening door applications.
Note: For maximum security specify an MS® Deadlock in conjunction with the direct-pull magnet. Armlock® 262-005
Specifications Single Magnet: 25mm x 250mm x 42mm (261 models). 28mm x 230mm x 38mm (262 model). Double Magnet: 25mm x 500mm x 42mm (261 models only). Armature: 11.3mm x 160mm x 36mm (2 no. for double magnet). Nominal Holding Force: 250kg (550lbs). Supply Voltage: 12 or 24vDC (±15%). Dual coil. Armature for Armlock 260® Series Magnets Nominal Current: 480mA @ 12vDC, 240mA @ 24vDC. Built-in voltage spike suppressor. Monitoring: Relay dry contact with LED. Integral on 261 models, compact isolated unit on 262-005. Door Gap: Maximum 3mm (1⁄8”). 261 Positioning: Outward opening - surface mounted to door frame header. Inward opening - door frame header using ‘L’ & ‘Z’ brackets. 262 Positioning: Mortice mounted for single action swinging or sliding door applications (not to be used as a shearlock). Magnet Housing: Brushed satin aluminium. Ordering Codes 261-000 Surface mounted single direct-pull magnet, 12/24vDC, non-monitored, suitable for timber or metal door applications. Note: To achieve immediate release, it is important that the release 261-200 Surface mounted double direct-pull magnet, 12/24vDC, non-monitored, suitable for timber or metal door applications. switch breaks the circuit on the positive supply to the magnet. 261-005 Surface mounted single direct-pull magnet, 12/24vDC, monitored, suitable for timber or metal door applications. 261-205 Surface mounted double direct-pull magnet, 12/24vDC, monitored, suitable for timber or metal door applications. 262-005 Mortice mounted single direct-pull magnet, 12/24vDC, monitored, complete with armature fixings for timber and metal doors. 268-600 Armlock® 260/280 Series glass armature bracket. Parts 261-300 Spare armature plate only for 260 series. 261-015 Surface mounted magnets & armature fixings only for 260 series.
Related Hardware ‘L’ and ‘Z’ Brackets (p26, 28) ~ Armature Housing (p30) ~ 4591M & 999M Monitored Paddle Handle & Exit Device Switching Accessories (p48) ~ RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58)
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 27 28 Accessories Dimensions ‘L’ & ‘Z’ Brackets for Armlock® 261 & 262 261-700 Adjustable ‘L’ Bracket A T S
Function Adjustable ‘L’ Bracket: Suits typical outward opening door applications where there is not sufficient space to fit the magnet to the head of the door frame.
‘L’ & ‘Z’ Brackets: For conversion of Armlock® 260 Series magnets to inward opening door applications, the ‘L’ & ‘Z’ Standard ‘L’ Bracket bracket kit consists of a standard ‘L’ bracket and two separate fully-adjustable plates which form the ‘Z’ bracket. (included in 261-800 kit) Rim Armature Housing: For situations where it is preferable not to drill a hole right through the door for the armature bolt (such as fire doors), the rim housing enables the armature plate to be mounted on the surface of the door.
Specifications Adjustable ‘L’ Bracket: Adjustable Brackets (included in 261-800 kit) Dimensions: 30mm x 250mm x 48mm. Door Frame Head Adjustable Material: Aluminium. ‘L’ Bracket
‘L’ & ‘Z’ Brackets: Dimensions: 30mm x 250mm x 48mm (Adjustable and standard ‘L’ brackets). Magnet Outward 50mm x 160mm x 50mm Opening Door (Adjustable brackets). Material: Aluminium. Armature Rim Armature Housing: Dimensions: 55mm x 175mm x 15mm. Material: Aluminium.
‘L’ Bracket Armature
Door Frame Head Magnet 261-900 Rim Armature Housing
Inward Opening Door Adjustable ‘Z’ Bracket Ordering Codes 261-700 Adjustable ‘L’ bracket, SAA finish 261-800 ‘L’ & ‘Z’ bracket kit, SAA finish 261-900 Rim armature housing, SAA finish
Related Hardware Armlock® 261 (p24)
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 29 30 Accessories Dimensions Adjustable ‘Z’ Brackets with Cover Plates (included in 261-801 kit). ‘L’ & ‘Z’ Brackets with Cover Plates for Armlock® 261 & 262 A T S Function Adjustable ‘L’ Bracket with Cover Plate: Suits typical outward opening door applications where there is not sufficient space to fit the magnet to the head of the door frame.
‘L’ & ‘Z’ Brackets with Cover Plates: For conversion of Armlock® 260 Series magnets to inward opening door applications, the ‘L’ & ‘Z’ bracket kit consists of a standard ‘L’ bracket and two separate fully-adjustable cover plates which form the ‘Z’ bracket. Rim Armature Housing: For situations where it is preferable not to drill a hole right through the door for the armature bolt (such as fire doors), the rim housing enables the armature plate to be mounted on the surface of the door.
Note: Suitable for new installations only, not as a direct replacement for standard ‘L’ & ‘Z’ brackets. Specifications Adjustable ‘L’ Bracket with Cover Plate: Dimensions: 31mm x 253mm x 50mm. Material: Aluminium. ‘L’ & ‘Z’ Brackets with Cover Plates: Dimensions: See page 29. Material: Aluminium. Standard ‘L’ Bracket (included in 261-801 kit). Rim Armature Housing: Adjustable ‘L’ Bracket with Cover Plates available separately (see ordering codes). Dimensions: 55mm x 175mm x 15mm. Material: Aluminium.
Ordering Codes 261-701 Adjustable ‘L’ bracket only, with cover plate, SAA finish 261-801 ‘L’ & ‘Z’ bracket kit with cover plates, SAA finish 261-900 Rim armature housing, SAA finish (see page 27 for illustration)
Related Hardware Armlock® 261 (p24)
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 31 32 Accessories Dimensions Armature Housing for Armlock® 261 & 262 T
Function For flush mounting of armature plate into timber door core.
Hank nut for the armature bolt
Specifications Dimensions: 16.5mm x 165mm x 40mm. Material: Steel. Ordering Codes Finish: Nickel plated. 261-400 Armature Housing for Armlock® 261 & 262 Fixings: Use standard armature bolt. Armature box fixing screws not supplied.
Related Hardware Armlock® 261 & 262 (p24)
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 33 34 Armlock® 281 Dimensions Direct-Pull Magnet A T S
Function To facilitate remote access and exit control of any aluminium, timber or steel door. The Armlock® 280 Series features clean aesthetics whilst maintaining a magnetic holding force of at least 510kg (1120lbs). Offering durability and low maintenance, Armlock® 280 Series Magnetic Locks at all times provide positive fail-safe operation (unless power supply continued during power failure by means of battery back-up). The 281 has a security pin feature to help prevent unauthorised removal of the magnet from the door frame fixing plate.
Note: For maximum security specify an MS® Deadlock in conjunction with the direct-pull magnet.
Armlock® 281-005 Specifications Single Magnet: 40mm x 266mm x 73mm. Double Magnet: 40mm x 532mm x 73mm. Armature: 16mm x 160mm x 61mm. (2 no. for double magnet). Nominal Holding Force: 510kg (1120lbs). Supply Voltage: 12 or 24vDC (±15%). Nominal Current: 480mA @ 12vDC, 240mA @ 24vDC. Dual coil. Built-in voltage spike suppressor. Monitoring: Relay dry contact with LED. Door Gap: Maximum 3mm (1⁄8”). Positioning: Outward opening - surface mounted to door frame header. Inward opening - door frame header using ‘L’ & ‘Z’ brackets. Magnet Housing: Brushed satin aluminium. ® Note: To achieve immediate release, it is important Armature for Armlock 280 Series Magnets that the release switch breaks the circuit on the positive supply to the magnet.
Ordering Codes 281-000 Surface mounted single direct-pull magnet, 12/24vDC, non-monitored, suitable for timber or metal door applications. 281-200 Surface mounted double direct-pull magnet, 12/24vDC, non-monitored, suitable for timber or metal door applications. 281-005 Surface mounted single direct-pull magnet, 12/24vDC, monitored, suitable for timber or metal door applications. 281-205 Surface mounted double direct-pull magnet, 12/24vDC, monitored, suitable for timber or metal door applications. 268-600 Armlock® 260/280 Series glass armature bracket Parts 281-300 Spare armature plate only for 280 Series.
Related Hardware ‘L’ and ‘Z’ Brackets (p34, 36) ~ 4591M & 999M Monitored Paddle Handle & Exit Device Switching Accessories (p48) RiteKey Keypad (p54) ~ Push-to-Exit Button (p56) ~ Power Supply Unit (p58)
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 35 36 Accessories Dimensions ‘L’ & ‘Z’ Brackets for Armlock® 281 281-700 Adjustable ‘L’ Bracket A T S
Function Adjustable ‘L’ Bracket: Suits typical outward opening door applications where there is not sufficient space to fit the magnet to the head of the door frame.
‘L’ & ‘Z’ Brackets: For conversion of Armlock® 280 Series magnets to inward opening door applications, the ‘L’ & ‘Z’ bracket kit consists of a standard ‘L’ bracket and two separate fully-adjustable plates which form the ‘Z’ bracket. Standard ‘L’ Bracket Rim Armature Housing: For situations where it is preferable not to drill a hole right through the door for the armature (included in 281-800 kit) bolt (such as fire doors), the rim housing enables the armature plate to be mounted on the surface of the door.
Specifications
Adjustable ‘L’ Bracket: Door Frame Head Adjustable Dimensions: 38mm x 266mm x 75.5mm. ‘L’ Bracket Material: Aluminium.
‘L’ & ‘Z’ Brackets: Adjustable Brackets (included in 281-800 kit) Dimensions: 46mm x 266mm x 76mm Outward (Adjustable and standard ‘L’ brackets). Magnet Opening Door 63.5mm x 160mm x 63.5mm (Adjustable brackets). Material: Aluminium.
Armature Rim Armature Housing Dimensions: 76mm x 175mm x 15mm. Material: Aluminium.
‘L’ Bracket Armature
281-900 Rim Armature Housing Door Frame Head Magnet
Inward Opening Door Adjustable ‘Z’ Bracket
Ordering Codes 281-700 Adjustable ‘L’ bracket, SAA finish 281-800 ‘L’ & ‘Z’ bracket kit, SAA finish 281-900 Rim armature housings, SAA finish
Related Hardware Armlock® 281 (p32)
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 37 38 Accessories Dimensions Adjustable ‘Z’ Brackets with Cover Plates (included in 281-801 kit). ‘L’ & ‘Z’ Brackets with Cover Plates for Armlock® 281 A T S Function Adjustable ‘L’ Bracket with Cover Plate: Suits typical outward opening door applications where there is not sufficient space to fit the magnet to the head of the door frame. ‘L’ & ‘Z’ Brackets with Cover Plates: For conversion of Armlock® 280 Series magnets to inward opening door applications, the ‘L’ & ‘Z’ bracket kit consists of a standard ‘L’ bracket and two separate fully-adjustable cover plates which form the ‘Z’ bracket. Rim Armature Housing: For situations where it is preferable not to drill a hole right through the door for the armature bolt (such as fire doors), the rim housing enables the armature plate to be mounted on the surface of the door.
Note: Suitable for new installations only, not as a direct replacement for standard ‘L’ & ‘Z’ brackets. Specifications Adjustable ‘L’ Bracket with Cover Plate: Dimensions: 39mm x 270mm x 64mm. Material: Aluminium. ‘L’ & ‘Z’ Brackets with Cover Plates: Dimensions: See page 37. Material: Aluminium. Standard ‘L’ Bracket (included in 281-801 kit). Rim Armature Housing Adjustable ‘L’ Bracket with Cover Plates available separately (see ordering codes). Dimensions: 76mm x 175mm x 15mm. Material: Aluminium.
Ordering Codes 281-701 Adjustable ‘L’ bracket only with cover plate, SAA finish 281-801 ‘L’ & ‘Z’ bracket kit with cover plates, SAA finish 281-900 Rim armature housings, SAA finish
Related Hardware Armlock® 281 (p32)
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 39 40 Armlock® 291 Dimensions External Magnet 220 A T S
Function 63 To facilitate remote access and exit control of any external gate/barrier. The Armlock® 291 maintains a magnetic holding force of at least 540kg (1190lbs). Offering durability and low maintenance, Armlock® 291 Magnetic Locks at all times provide positive fail-safe operation (unless power supply continued during power failure by means of battery back-up). One magnet suits both side and face fix applications. 41
Specifications Magnet: 220mm x 63mm x 41mm. Armature Plate Armature: 185mm x 61mm x 16mm. 185 Nominal Holding Force: 540kg (1190lbs). Supply Voltage: 12 or 24vDC (±15%). Dual coil. Nominal Current: 500mA @ 12vDC, 250mA @ 24vDC. Built-in voltage spike suppressor. Monitoring: Reed switch. Door Gap: Maximum 3mm (1⁄8”). 61 Positioning: Side and face fix application. Magnet Housing: Stainless steel. Cable Length: 1m. IP Rating: Independently tested, rated IP67 (assuming that wiring is protected
by conduit and connector). 16
Note: To achieve immediate release, it is important that the release switch breaks the circuit on the positive supply to the magnet.
Ordering Codes 291-005 Surface mounted external magnet, 12/24vDC, monitored, suitable for face or side fix application. Rated IP67. 291-800 ‘Z’ bracket kit, SAA finish.
Related Hardware RiteKey Keypad (p54) ~ Power Supply Unit (p58)
Adams Rite Europe Limited, The Meadows, Cannock Road, Wolverhampton WV10 0RR United Kingdom Issue 8 October 2008. © Adams Rite Europe Limited. Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 All dimensions are nominal and subject to tolerances. An ASSA ABLOY Group company Email: [email protected] Web: www.adamsrite.co.uk 41 42 MS Maglock Dimensions Magnetic and Mechanical Lock Mounting Plate A T S
Function To facilitate remote access and exit control of any aluminium, timber or steel door. The MS Maglock is designed with Armature &ROM