DESIGN DIMENSIONS LOA ...... 37 ft LWL ...... 34.0 ft For some cruising sailors, the “right” boat just might not be out there. Enter a new concept; developing affordable Beam ...... 12.0 ft custom or semi-custom solutions. The Tartan Custom 37 Deck House Sloop was born to address the way many of us cruise under sail. Most cruising involves a large amount of time under power, why not maximize the performance under DRAFT power, and provide a comfortable place to pilot the boat under power or sail? With 10 knots of powering performance Fin ...... 6.5 ft and when the wind is right, the ability to put miles under the keel under sail extends your cruising range and the ability Beavertail ...... 4.83 ft to be protected from the elements will make the journey more enjoyable. Whether it’s a trip down the “ditch,” a two Displacement ...... 15,000 lbs week summer cruise down east or a cruise to Catalina, this may be the perfect solution.

BALLAST ...... 5,500 lbs HULL CAPACITIES • NPG Isophthalic gelcoat • Internal structural grid designed to carry rig and keel Fuel ...... 100 gal - Infused epoxy modified vinylester hull loads, glass taped into hull Water ...... 120 gal - Locally reinforced at high load areas • UL and ABS approved, corrosion free Marelon Holding Tank ...... 40 gal • Closed cell synthetic foam hull coring flush thru hull fittings Auxiliary ...... 75 gal • Resin infused hull laminated in “one shot”elliminating - All hull penetrations made into solid fiberglass Berths ...... 4 secondary bonding of structural materials “core windows” • Interior surfaces painted out for aesthetics • Built to meet ABS Plan Certification SAIL DIMENSIONS • Transferrable 15-year hull structural and blister warranty Sail Area ...... 674.4 sq ft I ...... 48.0 ft J ...... 13.5 ft DECK • NPG Isophthalic gelcoat P ...... 46.5 ft • Infused epoxy modified vinylester deck E ...... 15.0 ft • CNC computer cut sealed end grain balsa coring Mainsail Area ...... 350.4 sq ft • Locally reinforced at high load areas 100% foretriangle ...... 324 sq ft • Molded nonskid surface on working areas Bridge clearance ...... 59.0 ft • All deck penetrations made into solid Ballast/displacement ...... 37% fiberglass “core windows” Displacement/length ...... 170.4 • 6061 T6 aluminum backing plates added at Sail area/displacement ...... 17.81 lamination for all loaded hardware Max speed under power ...... 10 knots • Inward facing hull flange with integrally molded Cruising speed ...... 8+ knots 6061 T6 aluminum bar forming a full length backing Designer ...... Tim Jackett and the Tartan Design Team plate for hull to deck joint • Hull to deck joint fasteners, stainless steel to meet or exceed ABS standard for offshore use • Hull to deck joint bonded with 3M 5200 adhesive sealant

KEEL & BALLAST • Deep fin beavertail bulb design • 5,500 lb deep fin, 5,500 lbs beavertail • Deep keep is thru-bolted to hull with cast in place stainless steel bolts

RUDDER & STEERING SYSTEM • Helm deck hydraulic steering standard, with full engine controls • Aft cockpit steering option; - Twin wheels - Hydraulic steering - Dual compasses on stainless steel guards - Single lever engine controls at port helm position • High density closed cell rudder blade with reinforced fiberglass skins • High tech, high strength carbon fiber rudder post for optimized rudder shape • High density, low friction rudding bearings • Gaiter type water seal on rudder • Emergency tiller ACCOMMODATIONS & STORAGE • Forward cabin with storage lockers, hanging locker and dovetail drawers • Cherry tongue and groove hull sides in forward cabin • Furniture grade helmdeck settees and seats with contoured cushions • Cherry cabinets with ventilated raised panel doors throughout VENTILATION • Helmdeck converts to double berth • (4) Stainless steel unlimited offshore CE approved deck hatches • Navigation station to port with upholstered captain’s chair • (8) Cabin side mounted stainless steel opening port lights • Helm console with installation space for extensive electronics with upholstered captain’s chair with fly screens • Storage below berth • Full opening aft helm deck door • Cockpit lazarette hatches port and starboard • Propane gas bottle storage in cockpit for two 11lb tanks ENGINE & MECHANICAL • 75 hp diesel saildrive with two blade folding propeller INTERIOR • 100 gallon fuel tank capacity with remote gauge • Structural fiberglass timbers taped to hull to • Cherry table with Tartan logo inlay • Fuel filter/water separator carry mast and keel loads • Cherry battened overhead with strategically • Lead lined engine insulation • Structural bulkheads bonded to hull and deck placed access panels • Engine service access from helm deck hatch • Cherry faced bulkheads and risers • Varnished teak and holly cabin sole with • Solid stock cherry trim throughout teak banded access panels • Solid stock raised panel cherry passage doors • Varnished teak handrails placed for security ELECTRICAL in cherry cherry door jambs in seaway • Batteries, (3) Group 27 • 12 VDC metered distribution panel • Polished chrome mortised door lock sets • Interior woodwork sprayed with satin finish catalyzed • 30 AMP battery charger • Battery selector switch • Solid stock cherry cabinet faces throughout • Selection of designer fabrics available for • Polished chrome and stainless steel interior lighting • Electrical bonding system • Positive lock polished chrome cabinet hardware interior upholstery • Automatic lights in hanging locker, liquor locker • Electric sump pump with automatic float switch for • Solid cherry face, dovetail joined, all wood and refrigerator compartments icebox and shower drains drawers throughout • Service lighting in engine compartment • Electric bilge pump with automatic float switch • Directional reading lights at berths with manual override SPARS & RIGGING • Directional spot lights in galley and over table • High water bilge alarm MAST BOOM • Recessed, dimmable overhead spotlights • UL approved, stranded, tinned copper wiring • Painted aluminum mast with sheaves for (1) jib, • Leisure furl in boom furling in cabin over head • Wiring bundled in PVC conduit with room for (1) main, (1) reacher and (1) spinnaker halyard • Boom topping lift • Interior, cockpit and swim ladder courtesy lighting future installations • Tapered airfoil swept spreaders • Rod vang with tackle led aft • (2) 30 amp shore power services • All wiring chafe protected where it passes • 1x19 Stainless steel wire rigging with • 110 VAC distribution panel through internal structure forged turnbuckles RUNNING RIGGING • 110 VAC shore power outlets in each cabin • ABYC compliant color coded wiring throughout • Internal halyards • Low stretch main and genoa halyards with GFI protection • USCG approved navigation lights on bow rail, • Harken furler for self-tacking jib • Polyester double braid jibsheet and mainsheet stern rail and mast • Masthead anchor light • (2) polyester double braid reef lines • Custom stainless steel chainplates • Steaming light with foredeck illuminator SAILS GALLEY & PLUMBING • Mast wiring conduit • 3 burner Force 10 gimbaled LPG stove with oven • Vitra Frigo drawer style stainless steel refrigerator • Fully-battened in boom furling mainsail and broiler • Hot and cold pressure water with service access to • Dacron self tacking jib • LPG sniffer with automatic shut off pump and plumbing • Cherry faced cabinetry with raised panel access doors • Polyethylene tubing and Whale mechanical fittings for fresh DECK HARDWARE • Cherry faced, dovetailed cutlery drawers water plumbing • (2) Harken 46.2 STC (self-tailing chrome) • Stainless steel 10” aft mooring cleats • 9” deep stainless steel double sinks with premium • All below waterline hose connections are double clamped with primary winches • Teak caprail through-bolted to hull flange marine grade galley faucet and manual foot stainless steel hose clamps • (1) Harken 40.2 STC (self-tailing chrome) • Teak taffrail pump with swivel spigot • Premium marine grade hoses used throughout aft house top winch • (2) Harken aluminum winch handles • Corian solid surface galley countertops • 120 gallons of freshwater tankage with distribution manifold • (1) Harken 40.2 STC (self-tailing chrome) • (6) Spinlock rope clutches for aft sail control leads main halyard winch • Storage under galley sink through ventilated raised • 6 gallon water heater, operates on 110 VAC or • Harken stacked double aft lead control blocks panel cherry doors engine heat exchanger • Harken self-tacking jib traveler • Harken turning blocks at base of mast for aft • Hinge out galley trash bin with cherry raised panel • 27” x 1 1/8” diameter stainless steel stanchions sail control leads door access • 27” x 1 1/8” tube double stainless steel bow • Custom stainless steel mast collar with multiple rail with navigation light attachments for mast base blocks • 27” x 1 1/8” tube double stainless steel split • Match molded anchor locker lid with latch stern rail with navigation light • Deck drains to waterline discharge, eliminates HEAD • 1 x 19 double lifelines with port, starboard hull streaking • Marine head with 40 gallon holding tank • Premium marine grade head faucet and shower mixer and transom boarding gates • Stainless steel housetop handrails • Deck pump out with vent • Corian solid surface counter tops with stainless steel sink • Stainless steel stem fitting with integral bow roller • Cockpit mounted manual bilge pump • Low odor premium marine grade sanitation hose • Utility storage under sink through raised panel cherry door • Custom fabricated bow mooring chocks • Stategically located molded drink holders in cockpit • Separate stall shower with Plexiglas enclosure • Solid cherry face upper vanity cabinet with storage • Stainless steel 10” bow mooring cleats • Offshore ready, molded, gasketed cockpit seat hatches and molded seat • Custom fabricated midship mooring chocks • Hinge down swim platform • Shower drains to separate sump box with • Stainless steel 10” midship mooring cleats automatic overboard discharge • Stern stainless steel quarter caps