Stinger Tees, Inc. Designer and Distributor of “Stinger” Golf Tees-The Ultimate In Golf Tee Performance! 26001 Miles Rd. Unit 10. Fax 216-765-0208 Warrensville Hts., OH 44128 Phone 888-600-3447 Website www.stingertees.com

HIT LONGER TEE SHOTS!

Most golfers, including most professionals, do not use golf tees correctly. A golf tee is an obstruction at absolutely the most critical point of the golf swing, and using it correctly will add distance and accuracy to your tee shots with the driver, fairway woods and irons.

Robotic testing definitely proved that the farther a golf tee is inserted into the ground, the more resistance is created, and the more tee shot distance was reduced!

It is important to use the shortest tee that will give you the height you desire. By using too long a tee, and inserting it too deep into the ground, you are creating resistance. Not only will you most likely break tees, but you will lose distance!

A golf tee should be put no more than ½” into the ground. If you place it deeper, we recommend pushing the tee forward and then bring it back to vertical before putting the ball on it. You want the tee to move, or ideally, to flip out of the ground!

This situation will result in a minimum amount of resistance and obstruction, and result in your hitting the golf ball farther.

The design of the long and sharp tip is one of the many high performance features of a Stinger tee. The sharp tip goes into and “bites” the ground more quickly and easier than a blunt tipped regular tee, enabling Stinger tees to be placed very shallow into the ground. Regular tees just push the dirt ahead of it and must be put farther into the ground to steadily hold the ball.

You will hit the ball farther off of a Stinger tee. All Stinger tees are USGA conforming.