Innovative UV Solutions
TM LABCURE UV System LABCURE MINI
FEATURES Configurations available with one or two 10” MPI-400 (electrodeless) UV Lamps, one or two HPI 6” UV (arc) lamps, or one MPI-400 + one HPI UV lamp Maximum UV Lamp Power; with MPI-400 (400 Watts/inch with 2 power levels, 50% and 100% power); with HPI 6” lamp (fixed 300 W/inch) Operates Mercury (H), Iron (D), and Gallium (V) lamps Focused reflector geometry with Milcure 1000 reflector liner for MPI-400 and HPI UV lamps Basic control package includes On/Off, Speed Pot, Digital Speed Readout SPECIFICATIONS Effective cure width is 10” when configured with MPI-400 lamp, 6” when configured with an HPI UV lamp Conveyor dimensions are approximately 46” long x 22” wide Conveyor belt width is 10 inches Conveyor belt material is TeflonTM Coated Fiberglass woven open mesh with soft hinge splice seam LABCURE MINI WITH HPI Conveyor speed ranges are 5-100 fpm and 25-500 fpm For fixed lamp focus, accepts substrate heights up to 1/2” Conveyor voltage inputs are 115vac/60hz, 1 phase or 230vac/50hz, 1 phase MPI-400 UV lamp input voltages are 460/480vac/60hz, 3 phase or 380/400vac/50hz, 3 phase HPI UV lamp system input voltages are 230/240/460/480vac/60hz, 3 phase or 230/380/400vac/50hz, 3 phase OPTIONS Configure as a “Hybrid” system with lamp boot designed to hold one HPI (arc) lamp and one MPI-400 (electrodeless) UV lamp, or as a 2-lamp system Increase HPI (arc lamp) power limit from 300 W/inch to 450 or 650 W/inch with variable power control 40%-100% in 1% increments Adjustable Lamp Focus is 3” in approximately ½” increments Adjustable Lamp Focus is 6” in approximately ½” increments Accept substrate/part heights up to 3” Custom speed ranges available upon request LABCURE MINI WITH MPI-400 Cold Mirror Reflector Metal Additive Lamps (Iron or “D” bulbs, Gallium or “V” bulbs) Quartz Plate Hot Mirror Quartz Floor standing base with pads or casters Easy Access Lamp Vacuum hold-down on conveyor belt Portable nitrogen inerting chamber can be purchased as an accessory (low cost option) HPI lamp with air actuating shutters Motor starters and cables for lamp cooling blowers Miltec Labcure Systems Miltec UV offers two small standard UV conveyors that can be configured for a wide range of UV curing applications utilizing either or both of our two High Performance UV Curing System Technologies: ●● MPI-400 Microwave Powered Electrodeless Bulb system ●● HPI High Peak Irradiance Arc Lamp UV Curing System
LABCURE MINI LABCURE PRO Ideal for applications that require a cure width up to Ideal for applications that require a cure width up to 10” 6” or 10”, for evaluating both the Miltec HPI (arc) UV or 15” using a Miltec HPI (arc) UV lamp and/or the Miltec lamp or the Miltec MPI-400 (electrodeless) UV lamp MPI-400 (electrodeless) UV lamp
●● Lamp holder allows user to install both types of ●● Integrated floor standing conveyor lamps in a single light shield assembly ●● Either UV lamp systems are capable of operating ●● Either UV lamp systems are capable of operating Mercury, Iron, or Gallium UV lamps Mercury, Iron, or Gallium UV lamps Configuration Configuration ●● Configurations available with one or two Miltec ●● Lamp can be configured to hold one 6” HPI lamp HPI UV lamps, one or two rows of Miltec MPI-400 or one MPI-400 lamps. Alternatively, the lamp electrodeless type UV lamps, or as hybrid system with holder can be built to hold both types of lamps in an HPI arc lamp and one row of MPI-400 a single light shield assembly. electrodeless lamps
HPI 6” UV Lamp System HPI 15” UV Lamp System ●● Equipped as a non-shuttered lamp with Milcure ●● Equipped as a non-shuttered lamp with Milcure 1000 reflectors that focus UV light to extremely 1000 reflectors that focus UV light to extremely high high peak irradiance peak irradiance ●● Powered at a fixed 300 Watts per inch (other ●● Includes premium control package - PLC and Color higher power levels available) Touch Screen ●● Powered at 450 Watts per inch and adjustable from MPI-400 10” UV Lamp System 40% to 100% in 1% increments (650 wpi option) ●● Microwave powered electrodeless lamp system ●● Ability to operate additive lamps with extremely MPI-400 10” UV Lamp System high UV peak irradiance ●● Microwave powered electrodeless lamp system ●● Ability to operate additive lamps with extremely high Conveyor Features UV peak irradiance ●● Includes light shield to accept parts up to 1/2” high ●● Two standard speed ranges: 5-100 fpm and 25- Conveyor Features 500 fpm ●● Includes light shield to accept parts up to 1/2” high ●● On/off switch, speed potentiometer, and digital ●● Standard speed ranges: 5-100 fpm and 25-500 fpm speed readout Touch Screen Controller ●● Controls all lamp and conveyor functions ●● Displays lamp status, conveyor speed, provide on- screen lamp diagnostics and electrical schematics to ease operation, troubleshooting, and maintenance LABCURE PRO
FEATURES Configurations available with one or two 10” MPI-400 (electrodeless) UV Lamp, one or two HPI 15” UV (arc) lamps, or one MPI-400 + one HPI UV lamp Maximum UV lamp power with MPI-400 (400 Watts/inch with 2 power levels, 50% and 100% power), with HPI 15” lamp (450 Watts/inch with 40-100% variable power in 1% increments) Power supply for HPI UV lamp is integrated into the base of the conveyor with interconnect cable to UV lamp housing and cooling blower Variable Frequency Drive (VFD) for lamp cooling blower included (installed in conveyor base) for automatically adjusting fan speed with respect to lamp power level when configured with an HPI UV lamp system Operates Mercury (H), Iron (D), and Gallium (V) lamps Focused reflector geometry with Milcure 1000 reflector liner for MPI-400 andHPI UV lamps LABCURE PRO Controls include premium control package with PLC and Color Touchscreen SPECIFICATIONS Effective cure width is 10” when configured with MPI-400 lamp, 15” when configured with an HPI UV lamp Conveyor dimensions are approximately 50” long x 34” wide x (36” belt to floor) Conveyor belt width is 17 inches Conveyor belt material is TeflonTM Coated Fiberglass woven open mesh with soft hinge splice seam Conveyor speed ranges are 5-100 fpm and 25-500 fpm For fixed lamp focus, accepts substrate heights up to 1/2” MPI-400 UV lamp input voltages are 460/480vac/60hz, 3 phase or 380/400vac/50hz, 3 phase HPI UV lamp system input voltages are 230/240/460/480vac/60hz, 3 phase or 230/380/400vac/50hz, 3 phase OPTIONS Configure as a “Hybrid” system with lamp boot designed to hold one HPI (arc) lamp and one MPI-400 (electrodeless) UV lamp, or as a 2-lamp system Increase HPI (arc lamp) power limit from 450 to 650 W/inch (variable power is standard with this conveyor) Adjustable lamp focus is 3” in approximately ½” increments LABCURE PRO HYBRID Adjustable lamp focus is 6” incremental or continuous via motorized hydraulic lifts Accept substrate/part heights 2” or more (custom beyond 2”) Custom speed ranges available upon request Cold Mirror Reflector Touch Screen Control Metal Additive Lamps (Iron or “D” bulbs, Gallium or “V” bulbs) Quartz Plate Hot Mirror Quartz Floor standing base is included in base model Vacuum hold-down on conveyor belt Portable nitrogen inerting chamber can be purchased as an accessory (low cost option) Nitrogen inerting can be integrated into conveyor HPI lamp with air actuating shutters High Performance Versatile UV Lab Curing Equipment www.miltec.com MILTEC UV • 146 Log Canoe Circle • Stevensville, MD USA Ph: 410-604-2900 • Fax: 410-604-2906 • email: [email protected]
008-40040