Electrical Cable Assemblies

ELECTRICAL CABLE ASSEMBLIES

Fleetcraft Coiled Cable Assemblies •Remains flexible in low temperature •Excellent long life memory. •Tough black jacket resists abrasion, common commercial degreasers, solvents. • Phillips Die-cast metal plugs with springs.

Heavy Duty, 6 12-Gauge Wires, 1 10-Gauge Wire Working Length Part No. 12 Foot T-E-1010186 15 Foot T-E-1010188 Economy, 6 14-Gauge Wires, 1 12-Gauge Wire 12 Foot T-E-1010185 15 Foot T-E-1010187

Grote UltraLink Power Cord Coiled Cable Assembly 19 foot working Length Extra power delivery for single or double configurations exceeding minimum legal lamp requirements. •Remains flexible at -55° to 190° F. • Extra tough urethane jacket material • Completely sealed to prevent corrosion. •Shock proof, solid molded elastomeric plug body. • Exceeds SAE J1067 and J2222 requirements.

One 10-Gauge, six 12-Gauge Wires One Angled, one straight plug Working Length Part No. 19 Foot with two 12 inch leads T-E-GR87024

PHILLIPS ABS PERMACOIL™

•Comes with two 15-730 plugs. •Bright Green Jacket • Good Abrasion reistance •-87° to +150 temperature range •Good recoil memory,and large finger grips.

Working Length Part No. 12 Foot T-E-30-4321 15 Foot T-E-30-4621 15 Foot with 48" lead T-E-30-4921 92

ELECTRICAL CABLE ASSEMBLIES Phillips ABS LECTRACOIL TM The NHTSA approved method for powering trailers and dolly ABS systems requires a separate, constant power circuit (Blue) and a standby circuit (Red). The RP137 issued by the Maintenance Council (TMC) division of the ATA, recommends power availability to the electrical coil cord of the tractor of 10 amps at 12.5 volts for the blue (auxiliary) and red (stoplight) circuit. The ABS LECTRACOIL TM complies with all of the above. The LECTRACOIL TM is provided with the same durable jacketing as the Duracoil,in a distinctive "lectra green" color which provides instant recognition. Exceeds SAE J2222. The Phillips LECTRACOILTM provides the following to tractor manufacturers in North America: (1)8 Ga. white ground (1)10 Ga. red stop light (1)10 Ga. blue (ABS power) (4)12 Ga. brown, black, yellow, green, for conventional trailer lighting. LECTRACOILTM 4/12, 2/10, 1/8 Ga. With 2 Permaplugs Working Length Part No. 15 ft. T-E-30-9620 15 ft., With 40" Lead T-E-30-9920 With 2 Metal Plugs Working Length Part No. 15 ft. T-E-30-9621

Phillips Duracoil TM Anti-Lock (FMVSS-121) •7 conductors in red jacketing •Remains flexible from -87° F to 195° F. •Primarily considered OEM quality by its distinctive red jacket. Designed to be used for all longer single, double and triple applications. •Meets SAE J1067 •All connector pins are double crimped for maximum conductivity and durability and meets SAE J560B.

5/12-Gauge , 1/10-Gauge, 1/8 Gauge With 2 Permaplugs (Illustration shows 2 metal plugs) Working Length Part No. 15 Foot with 40" lead T-E-32-9920

Phillips Duracoil TM Heavy Duty Cable Assemblies •Remains flexible from -87° F to 195° F. • Superior long life memory, flexibility, and abrasion resistance. •Black jacket with nylon Permaplugs • Standard with anticorrosive lithium grease for longer life. •Meets or exceeds SAE J560 or J2222. Heavy Duty, 6 12-Gauge wires, 1 10-Gauge Wire With 2 Metal Plugs with Springs Working Length Part No. 12 Foot with one 6 foot lead T-E-22-9521 With 2 Nylon Permaplugs Working Length Part No. 15 Foot with one 6 foot lead T-E-22-9720 93

ELECTRICAL CABLE ASSEMBLIES

Phillips Heavy Duty Permacoil Cable Assemblies •Remains flexible in low temperatures •Excellent long life memory. •Blue jacket with nylon Permaplugs •Standard with anticorrosive lithium grease for longer life.

Heavy Duty, 6 12-Gauge Wires, 1 10-Gauge Wire Working Length Part No. 12 Foot T-E-22-4320

Duraflex Straight Cable Assembly 7 Conductor •Operational from -40° F to 175° F •Plugs equipped with strain-relief springs •Plugs protected with anticorrosive grease • Connector pins meet SAE J560 •Rated at 110 amps - continuous service 6/12-Gauge, 1/10-Gauge Length Part No. 12 Foot T-E-22-2051 15 Foot T-E-22-2071

Single Pole Coiled Lift Gate Cable Assembly •Operational from -50° F to 150° F •Used for lift gate and remote battery charging applications - has dark green jacket •Maximum current carrying capacity 200 amps • Coil exceeds SAE J2222 •Includes 2 single pole plugs with springs

4 Gauge Fine Strand Copper Working Length Part No. 12 Foot T-E-23-4325 15 Foot T-E-23-4625

Six Conductor, 10' Mini-Coil

6 14-Gauge Wires, two 15-610 plugs Working Length Part No. 10 Foot T-E-19-6710 94

ELECTRICAL WIRE & TRAILER CABLE

FleetcraftTM Bulk Trailer Cable Bulk Trailer Cable No. of Wire • Flexible, soft annealed copper wires. Part No.Wires Gauge Pack • Jacket resists damaging common chemicals T-E-1011861 414100' • Wire colors meet ATA, TMC, and SAE T-E-1011861-500 414500' recommendations T-E-1094755 614100' T-E-1094755-500 614500' T-E-1010126 76-14/1-12100' T-E-1010126-500 76-14/1-12500' T-E-1011410 76-12/1-10100' T-E-1011410-500 76-12/1-10500'

Phillips ABS LECTRAFLEX TM 7 Conductor ABS Cable (1)8 Ga. white ground Part No. T-E-3-327 (1)10 Ga. red stop light Package Length (1)10 Ga. blue (ABS power) 100 Foot (4)12 Ga. brown, black, yellow, green, for conventional trailer lighting. The LECTRAFLEX TM is provided with the same durable jacketing as the Duracoil, in a distinctive "lectra green" color which provides instant recognition. Exceeds SAE J2222. Part No. T-E-30-2051 12 Foot Straight w/15-30 metal plugs 7 Conductor LECTRAFLEX TM ABS Cable Part No. T-E-30-2071 LECTRAFLEX TM 4/12, 2/10, 1/8 Ga. 30 Foot Straight w/15-30 metal plugs

2 Conductor Jacketed Parallel Cable Black and white conductors, heavy duty extruded gray jacket over 2 primary conductors. Package Length 100 ft. Part No. Gauge T-E-2-402 14/2 Ga. T-E-2-403 12/2 Ga.

PVC Insulated Primary Wire Color14 Gauge12 Gauge 10 Gauge Black T-E-2-121 T-E-2-131 T-E-2-141 Primary Wire in Blue T-E-2-122 T-E-2-132 T-E-2-142 100 Foot Spools Brown T-E-2-123 T-E-2-133- •Soft Annealed Copper Green T-E-2-124 T-E-2-134 T-E-2-144 • Resists most chemicals, Red T-E-2-125 T-E-2-135 T-E-2-145 moisture, abrasion • SAE J1128 White T-E-2-126 T-E-2-136 T-E-2-146 Yellow T-E-2-127 T-E-2-137 T-E-2-147 95

PLASTICLOO LOOMM Polyethylene Split Loom • Split seam feature allows for easy wire insertion and service. •Excellent for high heat, high abrasion applications. • UV stabilized, black in color Part No.I.D. Part No.I.D. T-E-5-023 1/4" T-E-5-029 5/8" T-E-5-025 3/8" T-E-5-030 3/4" T-E-5-027 1/2" T-E-5-032 1" INSULATED WIRE CONNECTORS Watertight Shrink and Seal Insulated Ring Terminals Crimp, heat, and shrink to fit for watertight connection 16 - 14 Gauge (Blue) 12 - 10 Gauge (Yellow) Ring Size Part No. Ring Size Part No. 3/8 T-E-1-1926 1/2 T-E-1-1937 5/16 T-E-1-1925 3/8 T-E-1-1936 Stud Hole Sizes 1/4 T-E-1-1924 5/16 T-E-1-1935 810 1/4 5/16 3/8 1/2 10 T-E-1-1923 10 T-E-1-1933 Crimp and heat for a watertight connection 8 T-E-1-1922 8 T-E-1-1932

Watertight Shrink and Seal Insulated Butt Connectors Crimp, heat, and shrink to fit for watertight connection 12 - 10 Gauge16 - 14 Gauge 22- 18 Gauge Crimp and heat for a watertight connection (Yellow) (Blue) (Red) Part No.Part No.Part No. T-E-1-1963 T-E-1-1962 T-E-1-1961

Crimp Type Vinyl Insulated Ring Terminals To avoid corrosion from moisture, heat shrink tubing is recommended after crimping for a watertight connection. 12-10 Gauge (Yellow) 16 - 14 Gauge (Blue) Ring Size Part No. Ring Size Part No. 3/8 T-E-1-2126 3/8 T-E-1-2145 5/16 T-E-1-2125 5/16 T-E-1-2146 Stud Hole Sizes 1/4 T-E-1-2124 1/4 T-E-1-2144 68 10 1/4 5/16 3/8 10 T-E-1-2123 10 T-E-1-2143 To avoid corrosion from moisture, heat shrink tubing is 8 T-E-1-2122 8 T-E-1-2147 recommended after crimping for a watertight connection. 6 T-E-1-2142

Crimp Type Insulated Butt Connectors To avoid corrosion from moisture, heat shrink tubing is recommended after crimping for a watertight connection. Vinyl Insulation Nylon Insulation Gauge Part No.Gauge Part No. 12 - 10 (Yellow) T-E-1-2620 12 - 10 (Yellow) T-E-1-2263 16 - 14 (Blue) T-E-1-2640 16 - 14 (Blue) T-E-1-2262 22 - 18 (Red) T-E-1-2660 22 - 18 (Red) T-E-1-2261 96

INSULATED WIRE CONNECTORS Economy Crimp Type Insulated Butt Connectors Plastic PVC insulated sleeve in quantities of 100 Gauge Part No. 12 - 10 (Yellow) T-E-YB100 16 - 14 (Blue) T-E-BB100 Our economy connectors - quality at a lower price. 22 - 18 (Red) T-E-RB100

Crimp Type Slide Terminals 12 - 10 Ga. (Yellow) 16 - 14 Ga. (Blue) VinylNylon VinylNylon T-E-1-2312 T-E-1-2274 T-E-1-2314 T-E-1-2272

12 - 10 Ga. (Yellow) 16 - 14 Ga. (Blue) VinylNylon VinylNylon T-E-1-2273 T-E-1-2273 T-E-1-2324 T-E-1-2271

3 Way Terminal For 16 - 14 Gauge Wire Part No. T-E-1-2193

Spade Type WIre Conector Part No. GaugeStud Size T-E-1-2443 16-14 Ga 10 Spade

Self Stripping Quick Lock Connectors Wire Size Color Part No. 18 - 14 Ga. Blue T-E-1-2335

Economy Connector Wire Size ColorPart No.Pack Qty. 18 - 14 Ga. White T-E-BC50 50

NYLON CABLE TIES

Standard Cable Ties Max. Te nsile Bundle Strength Pack Length Color Dia. (lbs.) SizePart No. 4" Natural 4" 18 100 T-E-1-4001 8" Natural 2" 50 100 T-E-GR83-6818 151/4"Natural 4" 50 100 T-E-GR83-6826 151/4"Natural 4" 120100 T-E-GR83-6828 21" Black6" 175 25 T-E-T150MOX2 97

BATTERY AND STARTER CABLE Battery And Starter Cable Part No. Size Strands ColorO. D. T-E-3-503 4 Ga. 133 x 26 Red.390 T-E-3-504 4 Ga. 133 x 26 Black.395 T-E-3-505 2 Ga. 133 x 24 Red.435 T-E-3-506 2 Ga. 133 x 24 Black.435 • 25 Foot lengths • Rope stranded for increased flexibility T-E-3-510 1/0 Ga.133 x 21 Black.555 •Made of soft annealed, fully stranded T-E-3-511 2/0 Ga. 259 x 23 Red.595 copper conductors T-E-3-512 2/0 Ga.259 x 23 Black.595 T-E-3-514 3/0 Ga.259 x 22 Black.670 BATTERY TERMINALS

Crimpable Copper Crimpable Copper Crimpable Copper Heavy Duty All Copper 90 Right Angle Closed End Elbow Right Post Type Ground Lugs Part Wire Post Part Wire Post PartWire Post • Flared Opening No.G auge Type No.Gauge Type No. Gauge Type • Crimp or Solder T-E-7-535 2/0Pos. T-E-7-557 2/0 Neg. T-E-7-511 1/0 Pos Part Stud T-E-7-513 1/0Neg No. Gauge Size T-E-7-515 2/0 Pos T-E-7-102 41/4" T-E-7-517 2/0 Neg T-E-7-103 4 5/16" T-E-7-104 23/8" T-E-7-107 1/03/8" T-E-7-109 2/03/8" T-E-7-110 2/01/2" T-E-7-111 3/0 5/16" Tin Plated Copper T-E-7-112 3/03/8" Ground Lugs T-E-7-113 3/01/2" 3/8" Stud Mounted • Flared Opening T-E-7-114 4/03/8" 3/8" Nut Group 31 • Crimp or Solder T-E-7-115 4/01/2" Single Barrel Part Stud Corrosion resistant nut Part Wire No.Gauge Size for Group 31 No. Gauge T-E-7-203 2/0 Pos terminal securement T-E-7-574 2/0 T-E-7-204 2/0 Neg Part No. T-E-7-186

Battery to Battery Cable, Group 31 Lead Charging Post Battery to Battery For 3/8" Stud Type Cable, Group 31 (A) Part No. T-E-7-155 Part No.Gauge Length T-E-058-118 28" 2/0 copper terminals with shrink tubing Circuit Breaker 150 AMP Manual Reset Ground Strap Part No. T-E-54-872PL Ground Strap (B) Part No.Gauge Length T-E-9-150 4 12" 98

SHRINK TUBING, ACCESSORIES An easy to use tubing that shrinks without melting - just slip over wire or splice and heat. Inner wall melts, providing a moistureproof connection. •Color Coded •Insulates wire splices •Reinforces the terminal/wire connection Dual Wall for Primary Wire Single Wall for Primary Wire I. D. I. D. Wire I. D. I. D. Wire Part No.BeforeAfter Color Size Part No. Before After Color Size T-E-6-202 3/8" 1/8" Black8 T-E-6-102 1/8" 1/16"Red 18 T-E-6-204 1/2" 1/8" Black6-2 T-E-6-104 3/16" 1/8" Blue 16-14 T-E-6-206 11/8'3/8"Black4/0-1 T-E-6-106 1/4' 1/8" Yellow 12-10 T-E-6-207 11/8"3/8" Red4/0-1 ELECTRICAL TAPE BATTERY POST CLEANER

All Purpose Grade Heavy Duty battery Vinyl Electrical Tape Post & Terminal Brush 7 Mil, 3/4" Wide, Part No. T-E-4-120 60 Foot Rolls UL Listed Part No. T-E-10200ET

SWITCHES Push - Pull Switch Push - Pull Switch Extra Heavy Duty 2 Position Moderate duty, 2 position. 6 - 28 Volts - 75 Amp S.P.S.T. Off-On 25 amp at 6V, Off-On Heavy duty die cast 15 Amp at 12V. body, chrome plated knob, Mounting stem 5/8" long, copper terminals. Mounting 7/16" diameter. stem 5/8" long, Ivory plastic knob. 15/32" diameter. Part No. T-E-35-300 Part No. T-E-35-306

Push - Pull Switch Toggle Switches Heavy Duty 6 - 24V, 50 Amp Mounts through 5/8" diameter MOM On-Off MOM On hole. Illuminated knob, 20 amp S.P.D.T. 3 Positions/ 3 Screw capacity, single pole normally Terminals open circuit. Part No. T-E-34-215 Part No. T-E-TL102 On-Off-On S.P.D.T. 3 Positions/3 Screw Terminals Part No. T-E-34-218

Keyed On/Off Switch Toggle Switch 2 hole mounting pattern Toggle Switch 6 - 24V, 50 Amp. Part No. T-E-31-602 6 - 24V, 50 Amp. On - Off S.P.S.T. On - Off S.P. S.T. 2 Positions, 2 Positions, 2 Screw Terminals 2 Screw Terminals 1 Part No. T-E-34-212 1 /2" Long Bat handle Part No. T-E-34-213 99

SWITCHES Dimmer Switch Dimmer Switch Dimmer Switch Floor mounted type, Floor mounted type, Special floor 3 special terminals. 3 special terminals mounted type, 3 Part No. T-E-52-251 Part No. T-E-52-252 special terminals for plug connection. Part No. T-E-52-253

Replaces: American Motors 3156124, Replaces: Ford COTF-13A024A, 3160926, Chrysler 1841895, 1881938, COTZ-13A024A Replaces: Delco-Remy 1997028, 1997031, 2291202, Ford B9A-13532A (2701524) 1997035, 1997036, 1997037, 3841892, GM 538446, 539288, 578005

Toggle Switch Toggle Switch Toggle Switch 6 - 24V, 50 Amp 6 - 24V, 50 Amp 6 - 24V, 50 Amp On-Off S.P.S.T. On-Off-On S.P.D.T. MOM On-Off MOM On 2 Positions, 3 Positions S.P.D.T. 3 Positions/ 2 Screw Terminals 3 Screw Terminals 3 Screw Terminals Part No. T-E-34-571 Part No. T-E-34-573 Part No. T-E-34-575

Toggle Switch Toggle Switch Switch 6 - 24V, 50 Amp 6 - 24V, 50 Amp Backup Lamp On-On D.P.D.T. On-Off-On D.P.D.T. Universal type. 2 Positions 2 Positions 2 threaded studs. 6 Screw Terminals 6 Screw Terminals Part No. T-E-21-361 Part No. T-E-34-576 Part No. T-E-34-577

Breakaway Switch Ignition Starter Switch Switch Reinforced nylon case, silver 4 position - 2 keys supplied. Backup Lamp contact points, nylon pull pin. Terminal nuts, lock washers, hex back nut, knurled face nut 2 screw supplied, diecast housing. terminals. Fits panel with 3/4" hole. Part No. T-E-31-103 Replaces OFF ACC IGN & ACC Kenworth, K30133, Freightliner 06- Part No. T-E-BE2010 IGN 10525, Mack 1MR2297, others START Part No. T-E-21-361

Momentary Start Switch Rocker Dimmer Switch 60 amps at 12V, 40 amps at 24V. Switch Universal - with 3 flat Weather and dustproof. Universal, screw terminals and Part No. T-E-24-360 snap in type 4 bullet terminals mounting supplied in separate bracket. hardware kit. 3 35A-12V Red screw terminals. pilot light. On - Off S.P. S.T.2 Part No. T-E-52-250 pos/3 screw terminals. White Replaces Delco-remy 465-A, B, E, H, J, K, actuator, nickel plated bezel. R, S, V, W, X, Z; 471P, R, T, W, Z, Part No. T-E-34-305 1997002, 3, 6, 7, 8, 9, 10, 11 100

SWITCHES Master Disconnect Switch Master Disconnect Switch Lever operated - 6 - 36V; Lever operated - 6 - 36V; 180 amps continuous capacity; D.P. S.T. (Off-On) 4 stud terminals 1000 amps in rush. S.P. S.T. (Off-On) for battery and alternator or generator field circuit. 2 stud terminals for Designed to break alternator generator circuit prior battery circuit only. Does not disconnect alternator to battery circuit disconnect. Use for gasoline and oil or generator filed circuit. tank trucks as well as other applications. On vehicles equipped Two 3/8" and two 10-32 with alternators engine copper alloy stud terminals. must be shut off to avoid Instruction sheet included. potential damage to Part No. T-E-51-304 alternator diodes. Instruction sheet included. Part No. T-E-51-302

Axle Switch Starter Solenoid Switch Starter Solenoid Switch 2 positions, both on controls. High and Universal - 12V applications - 12V grounded base, flat bracket, low axle ranges. Die cast body grounded base, flat bracket, breather cap. protected by rubber cover. Three internally grounded to housing, other Part No. T-E-52-306 female terminals to receive bullet end connected to small terminal. terminals. Large red knob. For use Part No. T-E-52-305

START (1) IGN. with eaton 2 speed SWITCH rear axle. BAT. STARTER Part No. T-E-52-261

START (1) IGN. SWITCH

BAT. STARTER Replaces: Ford C7AF-11450A, C6AZ-11450A, C9AZ-11450A

Solenoid Switch Continuous duty. Solinoid insulated. With hardware. Flat bracket Part No. T-E-TL900 Part No. T-E-TL905 Part No. T-E-52-307 Turn Signal Switch, Flat Black Turn Signal Switch, Flat Black • 12V •12V •7 Wire harness • 10 Wire harness BAT. (S) START SWITCH • Heavy Duty Die Cast Housing •Signal arm features built-in push

BAT. STARTER •Durable Die Cast Handle button high/low beam selector switch • Heavy Duty flare tab for hazard warning • 10 bulb capacity for hazard warning, • Heavy gauge mounting strap and hardware 5 bulbs per side for turn signal • Pilot Light for Turn Signal and Hazard flashing Replaces: Delco 1114218, 223; Prestolite 15-132, 133, 236, 311, SAS-4201, 4202, • 10 bulb capacity for hazard warning, Part No. TL129 4213, 5203 5 bulbs per side for turn signal flashing Replacement relay for TL905 960 Series Self-Canceling Turn Signal Switches • Surpasses SAE J589 & J910 standards for turn & hazard functions •Improved, light weight, nylon housing & handle •Capable of flashing 18 lamps in hazard mode (9 lamps per side for turn signal flashing) • 960 wiper options include 7 speed intermittent, two speed (hi/low) or omitted Part No. T-E-GR48282 • 961 wiper option includes two speeds (hi/low) • Improved design eliminates premature breakage & component wear Heavy Duty 2 to 18 Bulb Turn Signal • Feature Lift-to-Dim & Flash-to-Pass options Switch with High/Low Beam • Brake overrides hazard function lights when brake pedal is depressed •6 - 12V, eighteen 32 c. p. bulbs • Universal replacement with lift handle •Material: Glass filled nylon housing headlight dimmer • Black finish Part No. T-E-TL91250 • Grease-free contact area Turn Signal Switch • Harness sold separately 101

FLASHERS 12 Lamp Electromechanical 20 Lamp Heavy Duty Round 2 Prong Flasher Flasher Electronic Flasher 12V. Flashes up to three 32 cp •60 - 120 Flashes per minute •60 - 120 Flashes per minute bulbs per side, plus pilot bulb. •11 - 15V DC •11 - 15V DC Flashes up to six 32 cp bulbs • Fits standard round socket •Only one moving part for hazard warning. Aluminum • 100 hours of continuous •Fits standard round socket housing. operation •100 hours of continuous Part No. T-E-552 Part No. T-E-GR44530 operation Part No. T-E-GR44710

Signal Stat 12V Everflash Truck-Lite Ultraflash Heavy Duty Electronic FlasherSolid state 2 Prong Flasher Operates at 12V or 24V TRIDON Extended Life Super 16 Bulb capacity for hazard warning. Electronics are sealed in epoxy Duty Electronic Signal Flashes up to eight 32 cp bulbs per side compound which dissipates heat Flashers For trucks, plus pilot bulb. 35 amp capacity at 12V. from die cast aluminum housing. buses, RV's and 1 Short circuit protected with self- Low profile 1 /4" height above terminals. resetting feature. 5 year limited passenger cars. TM Permastat housing. Plug-in mounting or warranty. Rated for 35 amp load or 9 use 2 mounting holes on 2 /16" centers sixteen 32/3 cp bulbs. No ground Part No.Description Part No. T-E-TL242 wire required. Meets DOT FMVSS T-E-EL-12 2 Pin, 12V 108 and SAEJ945 and J590b. T-E-EL-13 3 Pin, 12V Part No. T-E-TL97231 Ultraflash w/o audible signal They both have 1-10 Load Lamps, Part No. T-E-TL97232 Ultraflash w/ audible signal 250 total watts, and a frequency of 70-100 FPM SPADE TYPE FUSES, MISCELLANEOUS CIRCUIT BREAKERS ATO® Circuit Breakers Spade Type Part No.Desc Color Universal - Meets SAEJ553 Fuses T-E-091173 ATO 3Violet Automatic reset T-E-091175 ATO 5Tan 1 Less Mounting Bracket T-E-091177 ATO 7 /2 Brown Part No. Amp Rating T-E-091180 ATO 10 Red T-E-54-115 15 T-E-091181 ATO 15 Blue T-E-54-120 20 T-E-091182 ATO 20 Yellow T-E-54-125 25 T-E-091183 ATO 25 Clear T-E-54-130 30 T-E-091184 ATO 30 Green T-E-54-140 40

(B) Circuit Breakers Snap-In Circuit Breakers Universal - Meets SAE J553 12 Volt remote reset circuit Automatic reset breaker. Replaces glass style With Mounting Bracket Amp fuses in existing fuse blocks. (A) Part No.Amp Rating Part No. Rating Opens automatically on ( ) A T-E-54-220 20 T-E-54-410 10 overload. Remains open for ( ) A T-E-54-230 30 T-E-54-415 15 protection until trouble is ( ) B T-E-54-520 25 T-E-54-420 20 corrected. ( ) B T-E-54-530 30 T-E-54-430 30 T-E-54-440 40 Blade Type Circuit Breakers Direct replacement for Part No.Amp Rating Application Guide ATO and ATC style fuses 15 Position Length Vehicle Eliminates replacement of T-E-091072 20 A.75 Ford Truck burned out fuses T-E-091073 25 Special "snap-off" blade T-E-091074 B.50 GMC, Ford, 30 design helps minimize T-E-091075 Navistar inventory *Type 1 breakers are designed C.30 Kenworth to continuously cycle or reset Meets requirements of during an overload situation. SAE J553C Type l* 102

ELECTRICAL PLUGS AND RECEPTACLES 7 Way Receptacle with Circuit Breakers With and Without Adaptor Housing Style A W/Adaptor Housing W/O Adaptor Housing Part No.Circuit Breakers Part No.Circuit Breakers T-E-BE24120 20 Amp T-E-BE24015 15 amp Style A T-E-BE24020 20 Amp T-E-BE24030 30 amp T-E-BE24000 None Style B W/O Adaptor Housing Part No.Circuit Breakers T-E-BE24001 None Style B

7 Way Receptacle 6 & 7 Way Receptacle Ring Terminal Type With split pins • Housing made of Engineering •20 amp circuit breakers Grade Composite • For surface mount • 5°slant for drainage •Projects 2.56" from • Lifetime warranty - If cover mounting surface breaks off, unit will be replaced. • Mounting gasket • Brass split pins included Part No. T-E-BE23707 Part No. T-E-BE24220

7 Way Receptacle Plug-In Type • Housing made of Engineering Replacement Cover Kits Grade Composite For Style A (New Style) • 5°slant for drainage • Lifetime warranty - If cover breaks off, unit will be Part No. T-E-BQ20014 (Shown) replaced. For Style B (New Style) • Brass split pins Part No. T-E-BE23705 Part No. T-E-BQ24002

STA-DRYTM Receptacles Receptacle Boot Exclusive design to prevent •Weather-guard universal moisture from entering electrical boot circuits. Virtually eliminates • Neoprene - maximum corrosion. protection against weather • Nylon Housing and ozone •Pins insert molded to stay Part No. T-E-15-740 watertight * Extended barrel for added cable 7 Way Nylon Plug support • Nylon housing •100% Brass pins Sta-Dry Socket •Uses standard 15-711 Bullet Terminal replacement insert Part No. T-E-16-724 •Cable guard and compression cable clamp prevents accidental cable pull out - the harder it's pulled, the tighter it gets •Exceeds SAE J560B Wire Insertion Ring Termination Part No. T-E-16-730 Part No. T-E-16-720 Part No. T-E-16-722 103

ELECTRICAL PLUGS AND RECEPTACLES

7 Way Zinc Die Cast Receptacles •Full opening lid for ease of plug insertion • Slanted 5 degrees for moisture 7 Way Zinc Die Cast Plugs drainage •100% brass floating pins •Easily field serviceable • Large finger grips • Machined brass pins • Large interior for ease of wiring • Stainless steel lid spring and • Positive direct drive cable clamp hinge pin Part No. Description Part No. Description T-E-15-720 2-Hole Mount (Shown) T-E-15-730 With Spring Guard T-E-15-722 3-Hole Mount T-E-15-710 Without Spring Guard T-E-15-724 Insert

STA-DRYTM Receptacles With and Without Circuit Breakers Glass Filled Nylon and Zinc Die Cast 7 Way Insert •Waterproof For 15-720, 15-722 •Molded Insert Part No. T-E-15-724 • Stainless lid spring and hinge pin •Neoprene gaskets •Stackable ground post 4 & 6 Way Zinc Die Cast Electrical Plugs

4 Way Plug Less cable guard Part No. T-E-15-410

Zinc Die Cast With extended barrel for added plug support Without 20 Amp30 Amp Breakers Breakers Breakers 4 Way Plug with Cable Guard T-E-15-760 T-E-15-762 T-E-15-763 Part No. T-E-15-430

Glass Filled Nylon Without 20 Amp30 Amp Breakers Breakers Breakers T-E-16-760 T-E-16-762 T-E-16-763 4 Way Receptacle Part No. T-E-15-400 Standard Die Cast Receptacle Housing 17/8" Deep, Includes: 15-766 Gasket, 15-765 Grommet,2 Hex mounting bolts Part No. T-E-15-769

6 Way Receptacle Nose Box Adaptor Plate Part No. T-E-15-600 Multiple mounting holes allow for easy installation. Part No. T-E-15-770 104

ELECTRICAL PLUGS AND RECEPTACLES

Zinc Die Cast 6 Way Plug Zinc Die Cast 6 Way Plug Less spring guard With spring guard Part No. T-E-15-610 Part No. T-E-15-630

7-Way Socket ISO 3731 ABS Receptacle w/ring terminal Sanctioned by the Truck Manufacturers Association Part No. T-E-16-822 (T.M.A.) and the truck Trailer Manufacturers Association (T.T.M.A.) as the optional and separate ABS connector. Currently extensively used in Europe as the ABS connector. Built to specifications per the International Standards Organization. (ISO) Socket Breaker 7-Way Receptacle w/QCS bullets & lock For applications requiring a separate ABS power and w/o breakers warning light, such as on triple combination vehicles. Part No. T-E-16-860 Part No. T-E-16-826

Single Pole Single Pole Plug With Strain Relief Receptacle Single Deep Nose Box Zinc Die Cast Spring Copper battery Zinc Die Cast Part No. T-E-16-775 lug to insure 4 Gauge maximum contact Copper battery lug to Stainless insure contact hinge pin Part No. T-E-15-335 and spring Part No. T-E-15-320 Dual Pole Plug Part No. T-E-15-336

Dual Deep Nose Box Part No. T-E-16-777

Dual Pole Part No. T-E-15-326

Grote Ultra-Pin Receptacles 2 & 3 Hole Mount •Die cast zinc •Barrel slanted to drain moisture •Mounting holes slotted for universal fit •Floating pins for easy alignment • Kit contains retrofit plug-in terminal kit consisting of 9 terminals and 9 boots Door Hinge • Weather-tight Repair Kit Door is die 2 Hole Mount cast zinc With terminal kit Part No. T-E-GR87270 Solid brass pin Receptacle only Part No. T-E-GR87250 Kit contains hinge pin, door 3 Hole Mount and spring With terminal kit Part No. T-E-GR87240 Part No. T-E-GR99680 Receptacle only Part No. T-E-GR87220 105

ELECTRICAL PLUGS AND RECEPTACLES Truck-Lite 7 Way Receptacle Truck-Lite Nose Box • Made of GE Noryl - tough, nonconductive, •Made of foam polycarbonate corrosion-resistant •Chemical resistant, virtually indestructible • Cadmium plated •Internal electrical contacts are sealed to floating brass pins eliminate corrosion •For use with ring •Available with or without circuit breakers type terminals •Main cable hookup 5.760" • Direct wired ground terminals are •Circuits identified by color identified both color codes Nose Box Without and embossing Circuit Breakers: Part No. T-E-TL50805 Nose Box With 4.130" Mounting holes on 15A Circuit Breakers: 6.19" Standard 7 Way Body, 4.50" centers Centers Solid Pins: Housing Part No. T-E-TL50806 4.38"H X 5.12" Parts: Part No. T-E-TL50860 Cap latch for Standard 7 Way Body, Split Pins: 7-Way Receptacle: Part No. T-E-TL50861 Part No. T-E-TL50808 Receptacle With 20A Circuit Breakers, Solid Pins: Cover: Part No. T-E-TL50809 4.88" Part No. T-E-TL50864 Receptacle w/15 amp circuit breakers, split pins Part No. T-E-TL50863 Truck-Lite Flush Mount 7 Way Receptacle Receptacle With 20A Circuit Breakers, Split Pins: •Made of GE Noryl - tough, Part No. T-E-TL50865 nonconductive, Receptacle w/threaded stacking studs, solid pins corrosion-resistant •Cadmium plated Part No. T-E-TL50866 floating brass pins Receptacle With Threaded stacking Studs, Split Pins: • For use with ring Part No. T-E-TL50867 type terminals •Direct wired ground •Circuits identified by both color codes and embossing 2.96" Centers

Surface Mounting Adaptor Boxes Standard 7 Way Receptacle, 2 Hole Flange, Split • Made of Noryl to allow surface mount of large Pins: receptacles Part No. T-E-TL50869 • Molded-in brass inserts for receptacle mounting • Available in deep (2" inside depth) or shallow (1.25" inside depth) Cover Service Kit • Bottom entry or back entry versions •4 piece service kit for Shallow Adaptor Box, all receptacles Bottom Access: •Noryl cover, Part No. T-E-TL50880 steel hinge pin, Deep Adaptor Box, stainless steel Bottom Access: spring and Part No. T-E-TL50882 shaft retainer Deep Adaptor Box, Part No. T-E-TL50875 Back Access: Part No. T-E-TL50883