24th Symposium on Fusion Technology

11 - 15 September 2006 - Palace of Culture and Science, Warsaw, Poland

TOPIC: G - Vessel/Vessel-in Engineering and Remote Handling

DTP2 Laboratory Situation in Tampere, Finland (O4B-G-386)

Arto Timperi VTT Industrial Systems Box 1300 FI-33101 Tampere Finland

Remote Handling is very important technology in the ITER project. Even ITER is regarded as a fairly long project, for the remote handling methods, tools and systems there is not very much development time provided. The technology has to be developed and demonstrated a long before supplied to the site in Cadarache. This is a large challenge, because the complex operations and extremely high reliability requirements.

In the end of 2004, the Remote Operation and Virtual Reality Centre (ROViR) was established in Tampere Finland. The start up for this facility creation was an agreement with EFDA to host the Divertor Test Platform 2 (DTP2) in Finland. During the year 2005 the ROViR Centre was put in action. The construction work for DTP2 is currently going on and the platform should be ready for hosting the remote handling development by the end of 2006. After that the laboratory will receive the robots, tools and employees for the DTP2 operation.

This abstract will give an overview of the DTP 2 platform in Tampere Finland as well as describe some other projects started in 2005. Presentation describes some problems of the ITER remote handling and tells about the state-of-the-art solutions. It also highlights some of the next tasks after putting the DTP2 platform in action. There are a plenty of tasks in the development of the ITER remote handling, after DTP2 laboratory is established.

30