<<

Crown Column® Collections

Quality | Excellence | Aesthetic Appeal ™ Crown Collections Crown Column® Collections SpunCast™ fiberglass columns from Crown Column® are a satisfying combination of modern-day technology and low maintenance care. Each column tshaft is manufactured bySpunCas craftsmen to centuries old standards creatingFiberglass an Columns architectural . Entasis, attributed to ancient Greek , is the slight convex curving of the column shaft resulting in a most pleasing appearance. Quality, excellence, and aesthetic appeal make Crown Column® products an exceptional value.

Contents

4 Code Compliance

SpunCast™ Columns 5-9 RoughSawn®, Square, and Craftsman 4-5 Round Tapered 12 Capitals and Bases 13 Decorative Capitals 14 Round Non-Tapered

Aluminum Columns 15-17 Round and Square

Pultruded Columns 18-20 Round and Square

Arts & Crafts cPVC Columns 21-23 Square and Craftsman 24 RapidSnap™ Column Wrap

Wood Columns 26 Colonial Wood 26 Capitals and Bases 26 Decorative Capitals

Porch Posts 27 Synthetic Posts 28 Vinyl Post Wrap 28 Colonial Wood Porch Posts

Balustrade Systems 29 6" Balustrade System 30 7" Balustrade System 31 12" Balustrade System

Outdoor Living 33 Stock Fiberglass Pergolas 34 Predesigned Fiberglass Pergolas 35 Mor-Shade™ for Fiberglass Pergolas 36 Predesigned PVC Pergolas 37 Understanding Pergola Dimensions 38 Outdoor Living Products 39 Synthetic Porch

Accessories 40 Polyurethane Brackets 41 Polyurethane Medallions 42 Architectural Services 2 43 Warranty 3 Building Code Compliance

Building Code Compliance

Crown Column® has updated our product testing to comply with changes to the Building Codes (IBC/IRC) and to the Acceptance Criteria for Fiberglass Columns. The 2 major changes that impacted SpunCast® and pultruded were: • Eccentric Axial Loading – the new maximum allowable load values are based on eccentric (offset) axial load as opposed to concentric (centered) axial loading. • Increased Safety Factor – the safety factor on the allowable load was increase for 2.5 times to 5 times Eccentric loading of columns is not recommended by Crown Column®. Crown Column® recommends following the installation instructions included with the product purchased.

Eccentric Loading* Bottom Concentric Load Diameter Avg. Allowable Avg. Ultimate (Lbs.) Load (Lbs.) Load (Lbs.) Round Tapered SpunCast® Plain and Fluted 6” 4580 22900 8000 8”* 4600 23000 10000 10”* 4690 23450 14000 12”* 4800 24000 18000 14” 7800 39000 20000 16” 8250 41250 20000 18” 10000 50000 20000 20” 10000 50000 20000 22” 10000 50000 20000 24” 10000 50000 20000 28” 10000 50000 20000 30” 10000 50000 20000 Square SpunCast® Plain, Fluted and Recessed Panel 6”* 5100 25500 8000 8”* 5150 25750 10000 10”* 5640 28200 14000 12”* 5900 29500 18000 14” 8500 42500 20000 16” 9500 47500 20000 Round No-Taper SpunCast® Plain and Fluted 6” 4580 22900 8000 8” 4590 22950 10000 Size Structural Load Capacity (Lbs.) 10” 4670 23350 14000 Round Wood Columns 12” 4750 23750 18000 6” 2000 14” 7000 35000 20000 8” 3200 16” 7000 35000 20000 10” 4200 18” 7000 35000 20000 12” 5100 24” 9000 45000 20000 Synthetic Porch Posts Craftsman SpunCast® 5" Colonial 1300 10” x 6” x 66” 9000 45000 10000 6" Colonial 5000 10” x 8” x 66” 9000 45000 10000 5" Square 5000 10.25” x 7.5” x 7’ 7000 35000 10000 6" Chamfered 5000 12” x 10” x 6’ 8000 40000 14000 Wood Porch Posts 12” x 10” x 10’ 8000 40000 14000 4” 1000 14” x 12” x 9’ 8000 40000 14000 5” 3000 16” x 9” x 58” 9000 45000 14000 6” 5800 16” x 9” x 6’ 9000 45000 14000 Round Fluted Aluminum Columns 16” x 9” x 8’ 9000 45000 14000 6” 20000 16” x 12” x 58” 9000 45000 14000 8” 20000 16” x 12” x 6’ 9000 45000 14000 10” 26000 16” x 12” x 8’ 9000 45000 14000 12” 26000 Round No-Taper Pultruded Square Fluted Aluminum Columns 8” 4000 20000 8000 6” 11000 10” 4000 20000 10000 8” 12000 Square Pultruded Plain and Recessed Panel 10” 9000 6” 3000 15000 5000 12” 17000 8” 3000 15000 6500 Heritage Square Recessed Panel Aluminum Columns 10” 3000 15000 7000 6” 24000 12” 3000 15000 7500 8” 23000 Legend/Elite Square Aluminum Columns *Covered under ICC ESR-1361 Conforms with 2015, 2012 and 2009 IBC/IRC 6” 17000 NOTE: • Eccentric (off-center) loading has a 5 times safety factor 8” 14000 4 • Eccentric (off-center) loading of columns is not covered by the warranty Conforms with 2015, 2012 and 2009 IBC/IRC ™ Square SpunCast Collection

Square fiberglass columns by Crown Column® offer an alternative to the more traditional round columns. Our plain, fluted, RoughSawn®, and recessed panel square SpunCast™ fiberglass columns are made from specially formulated glass-reinforced polymers with a one-piece shaft and applied astragal with an attractive and base moulding. Crown Column® square columns are both low maintenance and strong, resulting in a column that is easy to handle, water-resistant, and impervious to moisture- and insect-related problems.

5 Square SpunCast™ Collection NEW ® RoughSawn

24" Brace

The Beauty of Wood

Without the Issues: Checking Splitting Twisting Callbacks Complaints Unsatisfied Customers

RoughSawn® Columns*

Size ABCD

8” 73/4" 91/4" 31/2" / 51/2" 8', 9', 10' 10" 93/4" 111/4" 31/2" / 51/2" 8', 9', 10', 12' 12" 113/4" 131/4" 31/2" / 51/2" 8', 9', 10', 12' "C" is cap/base *RoughSawn® columns Two trim sizes are available and can be used as 6 ship unfinished both cap and base based on preference. ™

SquareSquare Fiberglass Columns Fiberglass with Poly Tuscan Capital and SpunCas Base t Flute to Flute to Base Plinth Plinth Torus Cincture Echinus Abacus Lengths Size Width Astragal Top of Bottom Overall Width Height Height Height Height Height Width Available (ft.) Base of Cap Height ACDEFGJKLMOR

6” 6” 91/8” 17/16” 15/16” 7/16” 1” 11/4” 13/8” 91/8” N/A N/A 35/16” 6, 8, 9, 10’

8” 8” 111/8” 17/8” 13/4” 5/8” 1” 13/8” 13/8” 1015/16” 4” 31/8” 41/4” 6, 8, 9, 10,12’

51”, 6, 8, 9, 10” 10” 131/16” 21/4” 25/16” 3/4” 1” 11/4” 113/16” 123/4” 4” 41/8” 53/16” 10, 12, 14, 16’ 8, 9, 10, 12, 12” 12” 169/16” 213/16” 23/8” 7/8” 1” 13/4” 21/16” 1611/16” N/A N/A 61/16” 14, 16, 18’

14” 14” 193/8” 31/8” 27/8” 11/16” 1” 21/16” 21/2” 191/16” N/A N/A 79/16” 8, 10, 12’

8, 10, 12, 16” 16” 221/8” 37/8” 33/8” 11/8” 1” 23/8” 23/4” 211/2” N/A N/A 83/8” 14, 16, 18, 20’ – Available fluted Columns to Surround Structural Supports Max Round Max Square Max Round Max Square Square Fiberglass Cast Size Support – Support – Support – Support – Plain Plain Fluted Fluted

6”* 5” 35/8” N/A N/A

8” 65/8” 65/8” 65/8” 65/8” 10” 83/4” 83/4” 65/8” 65/8” 12” 103/4” 103/4” N/A N/A 14” 113/4” 113/4” N/A N/A

16” 141/2” 141/2” N/A N/A Square Fluted SpunCast™ * – Inside is round Column

Beveled Cap & Base Set for Square Plain Square Cast Column SpunCast™ Column Size ABC

6” 6” 73/4” 31/2” 8” 8” 93/4” 31/2” 10” 10” 113/4” 51/2” 12” 12” 133/4” 51/2” NEW

7 Square SpunCast™ Collection

SquareRecessed Panel Columns SpunCas with Poly Tuscant Capital Recessed & Base End of Top of Base Base Base Capital Capital Capital Panel to Column to Lengths Size Width Plinth Plinth Moulding Abacus Abacus Echinus Astragal End of Start of Available (ft.) Width Height Height Width Height Height Column Panel ACDEFGHINO 8” 8” 111/8” 17/8” 2” 1015/16” 13/8” 13/8” 1” 12” 7” 8, 9, 10 10” 10” 131/16” 21/4” 35/8” 123/4” 113/16” 113/16” 1” 141/2” 81/2” 8, 9, 10 12” 12” 169/16” 213/16” 31/4” 1611/16” 21/16” 21/16” 1” 18” 101/2” 8, 9, 10, 12, 14 14” 14” 193/8” 35/8” 315/16” 191/16” 21/2” 21/2” 1” 21” 121/4” 8, 10, 14

Builder Capital and Base

Square Recessed Panel SpunCast™ Column

Poly Builder Capital & Base Set for Square Cast Column

Base Base Capital Capital Capital Base Size Plinth Plinth Square Square Round Astragal Moulding Width Height Width Height Height Inside Dimension* CDEFGHI Size Inside

6” 85/8” 11/4” 11/2” 715/16” 1” 5/8” 1” 8” 55/8” 10” 71/2” 8” 105/8” 11/4” 11/2” 915/16” 1” 15/16” 1” 12” 91/2” 10” 125/8” 11/4” 11/2” 125/8” 11/4” 15/16” 1” 14” 11” 12” 145/8” 11/4” 11/2” 145/8” 13/8” 1” 1” *May vary up to 1/8"

8 ™

Craftsman Columns with Poly Tuscan Capital &t Base Recessed Panel Columns with Poly Tuscan Capital & Base Craftsman SpunCas Base Base Base Capital Capital Capital Bottom Neck Lengths Size Plinth Plinth Moulding Abacus Abacus Echinus Astragal Width Width Available Width Height Height Width Height Height ABCDEFGHI 10” x 51/2” 10” 51/2” 13” 21/2” 23/8” 95/8” 13/8” 13/8” 1” 66” 10” x 8” 91/2” 71/2” 123/4” 23/8” 27/8” 101/4” 13/8” 1” 1” 66” 101/4” x 71/2” 101/4” 71/2” 131/2” 23/8” 21/4” 101/4” 1” 1” 1” 7’ 12” x 10” 12” 10” 169/16” 21/2” 21/2” 123/4” 13/8” 13/8” 1” 6’, 10’ 14” x 12” 14” 12” 183/4” 3” 3” 171/8” 2” 15/8” 1” 9’ 16” x 9” 16” 9” 183/4” 21/2” 21/2” 131/4” 13/8” 13/8” 1” 58” 16” x 9” 16” 9” 191/16” 21/2” 21/2” 131/4” 13/8” 13/8” 1” 6’, 8’ 16” x 12” 151/4” 111/2” 211/2” 37/8” 41/2” 151/4” 2” 13/8” 1” 58”, 6’, 8’

Columns to Surround Structural Supports for Craftsman Columns

Max Round Max Square Size Support Support

10” x 6” 41/4” 41/4” 10” x 8” 33/4” 33/4” 101/4” x 71/2” 9” 9” 12” x 10” 103/4” 103/4” 14” x 12” 123/4” 123/4” 16” x 9” 143/4” 143/4” 16” x 9” 143/4” 143/4” 16” x 12” 7’ 7’

Craftsman SpunCast™ Column

9 ™ Round SpunCast Collection

Round SpunCast™ fiberglass columns are available in plain, fluted, and no-taper shafts. SpunCast™ columns are a composition of cast, glass-reinforced polymers with exceptional strength and durability. Our columns are building code compliant with our most popular sizes covered under ICC ESR-1361.

Available in a wide array of sizes, our columns are manufactured to be aesthetically pleasing and low maintenance. To complement our columns, we have developed an extensive offering of capitals and bases.

10 ™ Round Tapered SpunCast™ Columns with Poly Tuscant Capital & Base TaperedBase SpunCasCapital Fiberglass TaperedBottom Neck Base SpunCasCapital Capital FiberglassBottom Top Flute Above Number Lengths Size Plinth Mouldng Square Bead Diameter Diameter Plinth Square Round Flute Flute Width Bead of Flutes Available (ft.) Width Width ABCDEFGHIJKLM

6" 55/8" 51/2" 9" 17/16" 17/8" 71/8" 11/8" 5/8" 1" 103/4” 1" 5/16" 31/4" 16 5, 6, 8, 9

5'-6", 6, 8, 8" 75/8" 61/2" 101/2" 17/8" 21/2" 99/16" 13/8" 1" 1" 103/4” 1" 11/16" 41/4" 24 9, 10

10" 95/8" 81/8" 131/8" 23/8" 27/8" 117/8" 13/4" 11/4" 1" 103/4” 1" 7/8" 51/8" 24 6, 8, 9, 10, 12

6, 8, 9, 10, 12" 115/8" 10" 161/2" 27/8" 31/4" 141/2" 2" 13/8" 1" 103/4” 1" 1" 57/8" 24 12, 14, 16, 18

8, 9, 10, 14" 135/8" 12" 183/4" 33/8" 4" 171/4" 23/8" 15/8" 11/8" 25/8” 7/8" 1" 67/8" 24 12, 14, 16 8, 9, 10, 16" 155/8" 131/2" 211/4" 37/8" 41/2" 191/4" 23/4" 17/8" 11/4" 3” 1" 11/4" 71/2" 24 12, 14, 16, 18 , 20 10, 12, 14, 18" 171/2" 153/8" 245/8" 4" 55/8" 223/8" 31/8" 23/4" 11/8" 103/4” 11/2" 13/8" 87/8" 24 16, 18, 20, 22, 24, 26 10, 12, 14, 20" 191/2" 173/16" 27" 43/4" 61/2" 2415/16" 33/8" 27/8" 17/16" 103/4" 11/2" 13/8" 9" 24 16, 18, 20, 22, 24 16, 18, 20, 22" 215/8" 191/4" 301/4" 53/8" 67/8" 271/2" 17/8" 33/4" 3" 103/4” 11/2" 111/16" 101/4" 24 22, 24, 26 12, 14, 16, 18, 20, 22, 24" 235/8" 211/4" 331/2" 57/8" 77/16" 301/2" 23/16" 41/16" 31/2" 103/4” 11/2" 111/16" 115/16" 24 24, 26, 28, 30 20, 22, 24, 28" 28" 241/8" 38" 63/4" 83/4" 333/8" 21/8" 43/4" 31/4" 103/4” 11/2" 2" 113/4" 24 26, 28

20, 22, 24, 30" 295/8" 261/2" 411/8" 61/2" 83/8" 381/4" 31/16" 45/8" 4" 103/4” 11/2" 2" 147/8" 24 26, 28, 30

– Available fluted. NOTE: Split kits utilize MMA adhesive that has specific storage requirements. Columns to Surround Structural Supports Round Tapered SpunCast™

Maximum Maximum Size Round Square Support Support AB K 6" 3" 21/2" K 8" 51/4" 311/16" 10" 67/8" 413/16" Fluted SpunCast™ 12" 87/16" 57/8" Column 14" 107/8" 127/8"

16" 127/8" 15" J Plain SpunCast™ 18" 143/8" 163/8" Column 20" 165/8" 19" 22" 181/4" 205/8" 24" 201/4" 225/8" 28" 22" 261/2" 30" 251/4" 281/8" 11 Round SpunCast™ Collection Roman Doric Capital & Base Base Capital Base Base Capital Capital Size Plinth Square Plinth Moulding Square Round Width Width CDEFGH 6" 81/4" 11/2" 13/4" 71/8" 11/8" 5/8" 8" 103/8" 17/8" 27/16" 93/4" 17/16" 11/16" 10" 1215/16" 23/8" 31/8" 121/2" 13/4" 19/16" 12" 151/4" 23/4" 31/2" 143/4" 23/16" 11/2" 14" 181/8" 315/16" 47/16" 171/2" 23/8" 113/16" Synthetic 16" 207/8" 33/4" 51/4" 201/2" 23/4" 19/16" 18" 231/4" 4" 6" 231/8" 3" 13/4"

F Capitals® Bases G CapitalsCrown Column SpunCast™ Bases fiberglass columns H come standard with a Tuscan capital and base moulding and are made from materials that are E water resistant, rot resistant, and impervious to D C insect infestation. Optional design styles include the base, the Roman Doric capital and Engineered Resin (ER) Tuscan Capital & Base base, and Contemporary capitals and bases Base Base Base Capital Capital Capital for non-tapered fiberglass columns. Size Plinth Plinth Moulding Square Round Round For more traditional installations, Crown offers CDEFGH a full range of decorative capitals that can be 6” 81/4” 11/2” 13/4” 71/2” 11/8” 5/8” viewed on page 7. 8” 101/4” 17/8” 23/8” 99/16” 13/8” 1” & 10” 127/8” 23/8” 27/8” 117/8” 13/4” 11/4” Our Builder Tuscan capital and bases are a low 12” 151/4” 23/4” 31/4” 141/2” 2” 13/8” profile design for use in railing applications. F G H

E D C

Poly Attic Base Builder Tuscan Capital & Base Base Base Base Base Base Base Size Plinth Plinth Size Plinth Plinth Base Base Base Capital Capital Capital Moulding Moulding Size Width Height Width Height Plinth Plinth Moulding Square Square Round CDECDE CDEFGH 6” 81/2” 11/2” 27/16” 18” 25" 43/8" 71/4" 6” 77/8” 11/4” 11/2” 71/8” 13/8” 5/8” 8” 101/4” 17/8” 31/4” 20” 2711/16" 47/8" 81/4" 8”* 97/8” 11/4” 11/2” 95/8” 13/8” 1” 10” 13” 23/8” 37/8” 22” 301/4" 53/8" 91/4" 10”* 117/8” 11/4” 11/2” 113/8” 13/8” 1” 12” 151/4” 23/4” 41/2” 24” 331/2" 6" 101/4" 12” 133/4” 11/4” 11/2” 127/8” 13/8” 1” 14” 191/4” 33/8” 53/8” 28” 38" 63/4" 113/8" *Available in Poly and ER/SIM 16” 213/4” 4” 61/2” 30” 411/4" 61/2" 111/4" F G H E D E C D C (Low profile design for railing applications.) 12 Crown Column® offers an extensive selection of specialty items such as decorative capitals made of polyurethane. DecorativeThey can be mounted on either Capitals plain or fluted SpunCast™ tapered columns for interior or exterior use. These capitals are true to their original inspirations and when combined with today’s advanced material technology and construction methods, they form a truly unique product.

Empire Empire Greek Greek Roman with Necking Angular Ionic Erectheum Ionic

Greek Erectheum Modern Roman Scamozzi with Necking Composite Corinthian of Winds

Ornamental Capitals*

Style 6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 30"

Empire 3 3 3 3 3 3

OrnamentalEmpire w/ Necking Capitals 3 3 3 3 3 3 Greek Angular Ionic 3 3 3 3 3 3

Greek Erectheum 3 3 3 3 3 3

Greek Erectheum w/ Necking 3 3 3 3

Greek Ionic 3 3 3 3 3

Modern Composite 3 3 3 3 3

Roman Corinthian 3 3 3 3 3 3 3 3 3 3

Roman Ionic 3 3 3 3 3 3 3 3 3 3

Scamozzi 33333333333

Temple of the Winds 3 3 3 3 3 3 3 3 3 3

*Marble available in some sizes 13 Round SpunCast™ Collection

™ Non-Tapered SpunCast™ Fiberglass with Poly Tuscan Capital & Base t Round Non-Tapered SpunCasMax RoundBottom Neck Non-TaperedBase Plinth Torus Echinus Abacus SpunCasCapital Size Square Lengths Available (ft.) Diameter Diameter Width Height Height Height Height Width Support ABCDEHGL

6” 55/8” 55/8” 81/4” 11/2” 13/4” 5/8” 11/8” 81/4” 3” 8, 9

8” 75/8” 75/8” 101/2” 17/8” 13/4” 11/4” 11/2” 105/8” 43/4” 6, 8, 9, 10

10” 95/8” 95/8” 131/8” 23/8” 21/8” 11/4” 13/4” 1213/16” 61/4” 6, 8, 9, 10, 12

12” 115/8” 115/8” 161/2” 27/8” 23/8” 13/4” 2” 157/8” 71/2” 6, 8, 9, 10, 12

14” 135/8” 135/8” 191/2” 33/8” 31/8” 21/4” 3” 191/8” 9” 6, 8, 9, 10, 12, 14

16” 153/4” 153/4” 221/8” 4” 31/2” 21/4” 23/4” 22” 101/2” 6, 8, 9, 10, 12, 14, 16, 18, 20

18” 171/2” 171/2” 245/8” 4” 4” 23/4” 31/8” 245/8” 111/2” 6, 8, 9, 10, 12, 14, 16, 18, 20 6, 8, 9, 10, 12, 14, 16, 18, 24” 24” 24” 331/2” 53/4” 51/8” 31/2” 41/8” 333/8” 153/4” 20, 22, 24, 26, 28,30

Tuscan Contemporary Tuscan Capital & Base Set

Poly Contemporary Capital & Base for Non-Tapered Fiberglass

Base Base Cap Cap Size Moulding Moulding Moulding Moulding Width Height Height Width CEKL

6” 81/8” 21/8” 21/8” 81/8”

8” 101/4” 31/4” 31/4” 101/4”

10” 13” 37/8” 37/8” 13”

12” 151/4” 41/2” 41/2” 151/4”

14” 185/8” 53/8” 53/8” 185/8” Non-Tapered SpunCast™ 16” 211/2” 61/4” 61/4” 211/2” Column 18” 241/8” 75/16” 75/16” 241/8”

24” 321/2” 915/16” 915/16” 321/2” 14 ™ Aluminum Column Collection Round Non-Tapered SpunCast

Aluminum columns are new to the Crown Column® offering. Available in a variety of sizes, shapes, and styles, they are designed to work with a number of architectural styles. They are easy to install, pre-finished, and load bearing, making them a great way to finish off a porch.

15 Aluminum Column Collection

White Square Fluted Column Available Column Number Sizes Traditional SquareSize of StavesAluminum Columns4” x 8’ ABC 4” x 10’ 4” 2 41/4” 61/4”7/8 1 ” 6” x 8’ 6” 2 51/2” 81/4” 23/4” 6” x 9’ 8” 2 71/2” 103/16” 23/4” 6” x 10’ 10” 4 93/8” 121/4” 3” 8” x 8’ 8” x 9’ Capital and Base 8” x 10’ Column 10” x 8’ Size 10” x 9’ BCDE 10” x 10’ 4” 61/4” 17/8” 115/16” 43/8” 6” 81/4” 23/4” 11/2” 59/16” 8” 103/16” 23/4” 11/2” 79/16” 10’ 121/4” 3” 111/16” 97/16”

4”, 6”, and 8” columns 10” columns have have two staves each four staves each

Elite Heritage Legend

16 Standard Capitals & Bases Available Fluted(Dimensions in inches on columnsRound and bases) AluminumSizes Columns Column 6” x 8’ Diameter ABCDE 6” x 9’ 6” 53/4” 61/16” 71/2” 21/8” 11/16” Traditional Square Aluminum Columns 6” x 10’ 8” 75/8” 8” 10” 211/16” 11/4” 8” x 8’ 10” 99/16” 10” 121/2” 33/8” 15/8” 8” x 9’ 12” 117/16” 12” 15” 4” 2” 8” x 10’ 10” x 8’ (Dimensions in inches) 10” x 9’ Column Number of Staves Number of Staves Column Column Diameter in Whole Column in Half Column Outside Diameter Inside Diameter 10” x 10’ 6” 3 2 53/4” 415/16” 12” x 8’ 8” 3 2 73/4” 7” 12” x 9’ 10” 4 2 99/16” 83/4” 12” x 10’ 12” 5 3 117/16” 105/8” 12” x 12’

Standard Cap & Base

Elite,Textured Plain Heritage, Elite Column & Legend Nominal Standard AluminumSize Lengths ABCDE Columns 6” 8’, 9’, 10’ 51/2” 71/4” 5” 3” 101/2” 8” 8’, 9’, 10’ 71/2” 91/4” 5” 3” 121/2” White Recessed Panel Heritage Column Nominal Standard Size Lengths ABC 6” 8’, 9’, 10’ 51/2” 81/2” 23/4” 8” 8’, 9’, 10’ 71/2” 101/2” 23/4” Textured Plain Legend Column Nominal Standard Size Lengths ABC 6” 8’, 9’, 10’ 51/2” 71/4” 5” 8” 8’, 9’, 10’ 71/2” 91/4” 5” Elite Heritage Legend

17 Pultruded Fiberglass Collection

The pultruded fiberglass columns produced by Crown Column® are designed to give you all of the beauty with a third of the weight. We leverage pultrusion technology to manufacture lightweight columns that are structural, easy to install, and long lasting.

They are low maintenance and impervious to the effects of moisture and insects.

18 PultrudedPlain and Recessed Panel SquareFiberglass Pultruded Column (in inches) Columns Available Size ACDEFGJKLNOP Lengths (ft.) 6” 51/2” 81/2” 11/2” 11/4” 1/2” 1” 7/8” 11/16” 8” N/A N/A N/A 6, 8, 9,10 8” 71/2” 11” 115/16” 111/16” 3/4” 1” 1” 17/16” 101/16” 8” 8” 37/8” 6, 8, 9,10,12 8”* 71/2” 107/16” 17/8” 111/16” 5/8” 1” 1” 13/8” 101/4” 8” 8” 37/8” 6,8,9,10,12 10” 91/2” 1215/16” 21/2” 21/8” 3/4” 1” 15/16” 13/4” 123/4” 9” 9” 43/8” 6, 8, 9,10,12 10”* 91/2” 131/8” 23/8” 21/8” 3/4” 1” 11/4” 13/4” 123/4” 9” 9” 43/8” 6, 8,9,10,12 12” 111/2” 151/4” 23/4” 27/16” 13/16” 1” 13/8” 2” 157/8” N/A N/A N/A6,8,9,10,12 *SIM/ER caps and bases. The remainder are poly caps and bases. NOTES: Recessed Panel top insert – 8” = 8”, 10” = 9”; Bottom insert – 8” = 8”, 10” = 9”. Neck mould is adjustable and is applied in the field. Recessed Panel available in 8” and 10” sizes only. Factory split columns are not available. Crown Column® does not recommend splitting Pultruded columns.

Round Square Square Square Square No-Taper Plain Recessed Recessed Recessed (with panel kit) (with panel (with 2-panel divider kit) divider kits) Square Column shown Round No-Taper with Tuscan Cap & Base Column shown with Neck Mould* is adjustable Tuscan Cap & Base and can be applied anywhere. Neck Mould for Round *Included with cap and base set. Column sold separately. TOP VIEW CUT-AWAY

Pultruded Square Pultruded Round Tuscan Cap & Base Tuscan Cap & Base Round Plain Recessed 19 Pultruded Fiberglass Collection

No-Taper Round Pultruded Column with Poly Capital & Base Available Size ABCDEFJKL Lengths (ft.) 8” 75/8” 75/8” 101/2” 17/8” 13/4” 3/4” 11/4” 11/2” 105/8” 6, 8, 9,10 10” 95/8” 95/8” 131/8” 23/8” 21/8” 3/4” 11/4” 13/4” 123/4” 6, 8, 9, 10, 12

Colonial Square Caps and Bases

designed for use in railing applications Poly Builder Capital & Base Set for Square Pultruded Column

Size CDELGH

6” 81/8” 11/4” 11/2” 77/16” 1” 5/8” 8” 101/8” 11/4” 11/2” 97/16” 1” 15/16” 10” 121/8” 11/4” 11/2” 121/8” 11/4” 15/16” 12” 141/8” 11/4” 11/2” 141/8” 13/8” 1” PermaCast® Colonial Square Poly Caps and Bases *Low profile design for railing applications. Base Base Capital Capital Capital Base Sie Plinth Plinth Square Square Round Astragal Moulding Width Height Width Height Height Sie SKU List Price CDEFGHI 6” 45091 $46.99 6” 1 ¼” 1 ½” 1” 1” 8” 46081 $49.99 Square Pultruded 8” 1 ¼” 1 ½” 1” 1” 10” 46141 $71.99 10” 1 ¼” 1 ½” 1 ¼” 1” 12” 46261 $110.99 Inside Dimension 12” 1 ¼” 1 ½” 1” 1”

Column ® Inside Inside Dimension PermaLite Colonial Square Poly Caps and Bases Width Base Base Capital Capital Capital Beveled Cap & Base Set for Square PultrudedBase Column Sie Plinth Plinth Square Square Round Moulding 6” 45/8” Width Height Width Height Height Sie SKU List Price CDEFGH 6” 55297 $40.49 6” 1 ¼” 1 ½” 1” 8” 55301 $56.99 Size ABC 10” 55305 $74.99 8” 65/8”* 8” 1 ¼” 1 ½” 1” Inside 10” 1 ¼” 1 ½” 1 ¼” 12” 55309 $92.99 Dimension 12” 1 ¼” 1 ½” 1” 10” 85/8”* 6” 51/2” 71/4” 31/2” 8” 71/2” 91/4” 31/2” 12” 105/8” 10” 91/2” 111/4” 51/2” *Recessed Panel Inside Dimensions 8” - 55/8”; 10” - 75/8” 12” 111/2” 131/4” 51/2”

Pultruded Panel Divider Kit to Convert a Single Panel Column NEW into a 2- or 3-Panel Column Kit Size Width Height 8” Panel Divider Kit (4 PIECES) 47/8” 21/4” 10” Panel Divider Kit (4 PIECES) 55/16” 51/8”

1 PANEL KIT to achieve 2-panel column. 2 PANEL KITS to achieve 3-panel column. RECESSED – Includes four top panel insert pieces and four bottom panel insert pieces.

Round Dimensions

Column Inside Inside Dimension Width

8” 73/8”

10” 93/8”* Inside Diameter Inside diameter may vary up to 1/8”.

20 Arts & Crafts PVC Collection

The elegance of the early 1900s square column is once again adding drama and personal flair to countless new and additions through Crown Column® Arts & Crafts PVC Collection. Made from cellular PVC and precision milled, the columns are designed to be easy to install, low maintenance, and long lasting.

The profiles and projections are closely designed for the best Arts & Crafts element to add to your next project.

21 Arts & Crafts PVC Collection

Arts & Crafts columns are made from cellular PVC and offer advantages of being unaffected by Artsmoisture and & insects Crafts but with thickness, Columns ease of use, and workability of wood. Arts & Crafts columns are available in many sizes and styles – square or craftsman – plain, fluted, raised panel and recessed panel. With all of these options, you are certain to find just the right amount of detail for your specific project.

Plain Recessed Raised Craftsman Panel Panel Craftsman Craftsman

Plain Square Square Square Square Fluted Raised Recessed Panel Panel Raised Recessed Panel Panel Pedestal Pedestal

Traditional Cap Tuscan Cap* Standard Cap Crown Cap* Ogee Cap

Traditional Base Tuscan Base* Standard Base Attic Base* Ogee Base

22 *Made from polyurethane and may need to be split in the field for installation. Plain Arts & Crafts Column Available Width ACGLRU Lengths (ft.) Inside Dimensions 6” 57/8” 63/4” 1” 65/8” 12” 6” 8, 9, 10 6” 45/8” 8” 77/8” 83/4” 1” 85/8” 12” 6” 8, 9,10,12 8” 65/8” 10” 97/8” 103/4” 1” 105/8” 12” 6” 8, 9,10,12 10” 85/8” 12” 117/8” 123/4” 1” 125/8” 12” 6” 8, 9,10,12 12” 105/8” Additional sizes are available from 5” to 24” width and 2’ to 20’ height.

Inside Dimension

Arts & Crafts Fluted, Recessed Panel and Raised Panel

Column * Available Width ACGLNOS RU Lengths (ft.) Inside Dimensions 6” 57/8” 71/4” 11/8” 71/8” 6” 6” 13/4” 9” 7” 6, 8, 9,10 6” 37/8” 8” 77/8” 91/4” 11/8” 91/8” 6” 6” 13/4” 9” 7” 6, 8, 9,10,12 8” 57/8” 10” 97/8” 111/4” 11/8” 111/8” 6” 6” 13/4” 9” 7” 6, 8, 9,10,12 10” 77/8” 12” 117/8” 131/4” 11/8” 131/8” 6” 6” 13/4” 9” 7” 6, 8, 9,10,12 12” 97/8” (Rail breaks are 7” long and designed to fit 36” or 42” rail heights.) *S dimension for 6” raised panel is 1-1/4”, 8” raised panel is 1-1/2”. S dimension for fluted columns vary. Additional sizes are available from 5” to 24” width and 2’ to 20’ height. Number of Flutes Per Side 6” 3 8” 5 Inside Dimension 10” 7 12” 8

Arts & Crafts Craftsman L-Assembly Column ABCGLNOSRU Available Width (in.) Lengths (in.) L Assembly 12 x 8 117/8” 77/8” 147/8” 11/8” 107/8” 6” 6” 13/4” 2” 2” 54, 60, 66, 72, 96 • Manufactured from 3/8”, 1/2”, or 16 x 10 157/8” 97/8” 187/8” 11/8” 127/8” 6” 6” 13/4” 2” 2” 54, 60, 66, 72, 96 5/8” cellular PVC 20 x 15 197/8” 147/8” 227/8” 11/8” 177/8” 6” 6” 13/4” 2” 2” 54, 60, 66, 72, 96 • Shipped in two L-shaped halves Additional sizes are available from 5” to 24” width and 2’ to 20’ height. • Square Column Ready to Wrap Around Existing Inside Dimensions Post • Available in Plain, 12” x 8” 105/8” 57/8” Fluted, Raised Inside 16” x 10” 145/8” 67/8” Panel, Recessed Dimension Panel 20” x 15” 185/8” 127/8” • Craftsman Columns Available in Plain, Arts & Crafts Pedestal Raised, and Recessed Panel Column Available Styles Width ACLNOSRU Lengths (in.) Inside Dimensions 16” 157/8” 187/8” 187/8” 6” 6” 13/4” 2” 2” 40, 46 16” 137/8” 20” 197/8” 227/8” 227/8” 6” 6” 13/4” 2” 2” 40, 46 20” 157/8” 24” 237/8” 267/8” 267/8” 6” 6” 13/4” 2” 2” 40, 46 24” 217/8” Additional sizes are available from 5” to 24” width and 2’ to 20’ height.

Inside Dimension

PAINTING AND FINISHING – Caulking where required using Siroflex® brand sealant and adhesive provided by manufacturer. Putty any holes using acrylic or caulk. Lightly sand or scuff surface of column. Clean surface of column to remove any dirt or hand oil residue with light detergent and water, denatured alcohol, or cleaner. Be sure to remove soap residue with clean water. Apply one coat of 100% acrylic exterior primer and one or more finish coats of 100% acrylic exterior paint. Do not paint columns using dark colors (dark colors are considered any color that falls within the L value of 56 to 0). L is a measure of lightness of an object and ranges from 0 (black) to 100 (white).

23 Arts & Crafts PVC Collection

™ NEW Transform a treated post into a finished columnRapidSnap in minutes with RapidSnap™.Column Wrap RapidSnap™ column wrap’s patented snap design permits easy installation by one person. It can also be used as a newel post wrap.

• 25 Year Limited Warranty • Weather Proof • Insect Proof • Low Maintenance • Made from cPVC • Easy Installation

RapidSnap™ Column Wrap Technical Specifications Product Actual Inside Actual Outside Column Wrap Description Dimension Dimension Will Fit 4” x 4” x 8’6” 4” x 4” x 8’6” 43/4” x 43/4” x 8’6” 4” x 4” Post 4” x 4” x 10’ 4” x 4” x 10’ 43/4” x 43/4” x 10’ 4” x 4” Post 6” x 6” x 8’6” 6” x 6” x 8’6” 63/4” x 63/4” x 8’6” 6” x 6” Post** 6” x 6” x 10’ 6” x 6” x 10’ 63/4” x 63/4” x 10’ 6” x 6” Post** 8” x 8” x 8’6” 83/4” x 83/4” x 8’6” 91/2” x 91/2” x 8’6” 8” x 8” Post** 8” x 8” x 10’ 83/4” x 83/4” x 10’ 91/2” x 91/2” x 10’ 8” x 8” Post** 10” x 10” x 8’6” 103/4” x 103/4” x 8’6” 111/2” x 111/2” x 8’6” 10” x 10” Post** 10” x 10” x 10’ 103/4” x 103/4” x 10’ 111/2” x 111/2” x 10’ 10” x 10” Post** There may be a variance of up to 1/8” in all dimensions. **Or smaller.

RapidSnap™ Accessories

Accessories Sizes Available Bed Mould Trim Kit* 4, 6, 8, and 10” Hampton Trim Kit 4, 6, 8, and 10” Chesapeake Trim Kit 4, 6, 8, and 10” Bed Mould XL 4, 6, 8, and 10” Neck Mould 4, 6, 8, and 10” Charleston Newel Cap 4” Wilmington Newel Cap 4” Ashbury Newel Cap 6” *Bed Mould Trim Kit is needed for both ends. NOTE: Accessories sold separately. Bed Mould Hampton Chesapeake

Charleston 4” Newel Cap Wilmington 4” Newel Cap Ashbury 6” Newel Cap

24 ™ Wood Column Collection RapidSnap Column Wrap

The Colonial wood column is the most popular choice in our wood column collection. The Colonial wood column has a gradual straight taper, is available in both plain and fluted styles.

The overall length of wood columns include the column shaft and the standard Tuscan cap and base.

25 Wood Column Collection

Colonial Wood Columns with Tuscan Capital & Base ColonialSize ABCDEFGJKLONRT Wood Columns Lengths Available 6” 55/8” 45/8” 71/4” 13/8” 11/4” 9/16” 15/16” 115/16” 15/16” 7” 41/2” 8" 33/16” 2” 8’, 10’ 8” 7” 61/4” 91/4” 11/2” 11/4” 3/4” 15/16” 11/4” 11/4” 87/8” 41/2” 8" 31/4” 2" 8’, 10’, 12’ 10” 9” 81/4” 111/4” 11/2” 11/4” 3/4” 15/16” 11/4” 15/16” 101/2” 41/2” 8" 31/4” 2" 8’, 10’, 12’ 12” 115/8” 93/8” 131/8” 13/8” 11/4” 7/8” 15/16” 13/4” 13/8” 12” 41/2” 8" 31/8” 2" 8’, 10’, 12’

Larger and no-taper sizes may be available. Call for quote.

Poly Attic Base for Wood Columns

Base Base Base Size Plinth Plinth Moulding Crown’s wood columns come standard CDE Capitalswith a polyurethane Tuscan& Bases capital and 6” CALL CALL CALL base that are water resistant, rot resistant, 8” 101/4” 17/8” 31/4” and impervious to insect infestation. 10” 13” 21/2” 4” Optional design styles include the Attic 12” 16” 27/8” 45/8” base and the Roman Doric base. For the more traditional installations, Crown offers a full range of decorative capitals that can be viewed below.

Poly Standard Capital & Base for Wood Columns

Base Base Base Capital Capital Capital Size Plinth Plinth Moulding Square Square Round CDEFGH 6” 8” 11/4” 11/2” 71/2” 11/4” 11/8” 8” 101/4” 17/8” 23/8” 87/8” 15/16” 15/16” 10” 127/8” 27/16” 27/8” 105/8” 13/4” 11/4” 12” 16” 27/8” 31/4” 133/4” 21/16” 21/16”

Colonial Crown Column® offers a large selection of specialty items such as Wood decorativeDecorative capitals made of polyurethane.Capitals* They can be mounted on Column either plain or fluted columns for interior or exterior use. These capitals Colonial are true to their original inspirations and when combined with today’s or Classic advanced material technology and construction methods they form a Size truly unique product. 6” 8” 10” 12”

Additional sizes available Roman Temple Roman 26 Scamozzi Corinthian of Winds Ionic *Marble capitals available in some sizes Porch Posts NEW PREFINISHED INJECTION MOLDED SKIRTS Crown Column® synthetic porch posts are manufactured from a low Syntheticmaintenance polyethylene and arePorch prefinished white, Posts except for the square post that has a cap stock. Choose from either a Colonial, Square, Chamfered, or Lamp Post design. The pipe in the center of the Lamp Post is designed to allow a wire to be easily installed. CROWN SYNTHETIC 5” Square Post Colonial Lamp Post POST FEATURES: 5” or 6” Colonial Post 6” Chamfered Post Chamfered Lamp Post • Five Styles Available • Precise Detail • Prefinished White • Low Maintenance • Load-Bearing with Structural Metal Insert (Excludes Lamp Posts) • Fasteners Included • Optional Fastening Kits Available (Skirt, Brackets, and Screws) • 25 Year Limited Warranty

Top Post Turned Base Length Portion Width Size Area Height (in feet) (Square Top) CROWN COLONIAL POSTS 5” x 5” 4 381/2 411/2 8 161/4 5” x 5” 4 381/2 451/4 9 241/2 6” x 6” 5 381/2 411/2 8 161/4 6” x 6” 5 381/2 451/4 9 241/2 CROWN SQUARE POSTS 5” x 5” 41/4 N/A N/A 8 N/A 5” x 5” 41/4 N/A N/A 9 N/A 5” x 5” 41/4 N/A N/A 10 N/A Crown Colonial Synthetic Post Two (2) post fasteners are shipped with each Colonial post. CROWN CHAMFERED POST Foam Filler 5” Colonial5” Colonial 6” Colonial6” Colonial 5” Square 5” Square 5” Chamfered5” Chamfered 6” x 6” 31/2& 51/2 N/A 461/4” 8 41/2 Post CROWN COLONIAL LAMP POST 20 20 13 13Side view (cut-away) > Pipe Gauge Gauge 13 13 15 15 Gauge Gauge Gauge Gauge Gauge Gauge 6” x 6” 31/2& 51/2 38 51 7’ 61/2” N/A Outer Top View of FastenerTop View of Fastener CROWN CHAMFERED LAMP POST 2” Pipe 2” Pipe 2 /” Pipe 2 /” Pipe 2 /” Pipe < 2 /”Top view Pipe of fastener2/” Pipe Shell2/” Pipe Post Fastener 6” x 6” 31/2 & 51/2 N/A 461/4” 8 41/2 Crown Square Synthetic Post Measurements in inches unless otherwise noted. There may be a Two (2) post fasteners are shipped with each Colonial post. variance of up to 1/4” in all dimensions. *Loadbearing capacity is dependent on the concentric loading 5” Colonial 6” Colonial 5” Square 5” Chamfered of the post. NOTE: All sizes are nominal. 20 13 Gauge 13 15 Gauge Gauge Gauge

Top View of Fastener 2” Pipe 2 /” Pipe 2 /” Pipe 2/” Pipe 27 Porch Posts Balustrade Systems

• Designed to Dress up a Treated Sizes Vinyl Square Wood PostPost Wrap • Low Maintenance 4” x 8.5’ • Pre-Finished White 4” x 10’ • Insect and Weather Proof • Installs in Minutes 6” x 8.5’ • Perfect for Remodeling 6” x 10’ • Limited Lifetime Warranty Easy Installation

Bottom Size Size Height Order for Use With Width ABC Colonial4” x 4” x 8’-0" 31/4” Wood42" 40" Porch14" Posts31/4” 1” 4” Posts 4” x 4” x 9’-0" 31/4” 44" 40" 24" 41/4” 1” 5” Posts 51/4” 1” 6” Posts 5” x 5” x 8’-0" 41/4” 42" 40" 14”

5” x 5” x 9’-0" 41/4” 44" 40" 24"

5” x 5” x 10’-0" 41/4” 56" 40" 24"

6” x 6” x 8’-0" 51/4” 42" 40" 14”

6” x 6” x 9’-0" 51/4” 44" 40" 24"

6” x 6” x 10’-0" 51/4” 56" 40" 24"

28 6”

Ø2-3/4” 3-3/4”

Balustrade Systems 3-3/4”

® Crown Column has created a unique and elegant balustrade system that can make your stand out from3-7/8” the rest. These low-maintenace features are made by high-density urethane around structural8” elements Ø2-3/4” 3-3/4” in order to provide exceptional beauty, durability, and quality. Choose from three rail sizes and severalØ6-1/2” 8” profiles. Curved balustrade systems are available in 10’ sections. 6”

8” 5” SQ 4” 3-1/2”

1” SUPPORT Wessex Square Edinburgh BLOCK 6" Balustrade System 1-1/2” NO. 58012 9-1/2” 9-1/2” 2’-8”

1/2”

6-5/8” 1” 6-5/16” 2-5/8” 4-1/4” 4’-0” 2’-9-5/8” 1’-2-5/8” 2’-8-7/8” 1’-1-7/8” 2’-8-1/8” 2’-4” 1’-2-5/8” 2’-0” 2’-2-1/2” 1’-1-7/8” 2’-2-1/2” 1’-1-7/8” 1’-8” 1’-2-5/8”

9-1/2” Poly moulding 9-1/2” 6-3/4” 1’-0” 5’-7/8” 6-5/16” provided loose to be installed on job site. 2-3/4” BALUSTER BALUSTER EXTENDED BALUSTER BALUSTER BALUSTER BALUSTER EXTENDED BALUSTER 58033 58034 58029 58030 58031 58036 BALUSTER 58035 58032

6" Balustrade System Maximum Wales Windsor SKU M O/C Spacing 58031 7/8” 21/4" 51/4" 58032 7/8” 21/4" 51/4" 6-1/2” 8” 58036 7/8” 21/4" 51/4" 3-3/4” 4” 5-1/2” 58033 1” 2" 51/2" 58034 1” 2" 51/2" 58035 1” 2" 51/2" 2’-1” 3’-2” 20” 36” 31” 20” 2’-1” 20” FIVE SIDED 29” 58037 1” 2" 51/2" PLAIN NEWEL 2’-8-1/2” 57088 ANGLE NEWEL 58038 1” 2" 51/2" 57084 58029 0" 4" 7" 8” 6”

10” 8”

10” 5” 58030 0" 4" 7" Ø6-1/2”

6-1/2” Ø6” 8” 5-1/2” 3-3/4” 58061 11/16" 13/4" 51/4" 7-3/8” BALUSTER BALUSTER 58062 11/16" 13/4" 51/4" 7-3/8” BALUSTER BALUSTER BALUSTER PANEL NEWELAND 58037 58038 Top View 58061 58062 58063 CORNER8” NEWEL 58063 11/16" 13/4" 51/4" Five Sided 57089

4” Angle Newel

6” 9-1/2” 1” 6” TOP RAIL 1” Ø2-3/4” 6” 2” 1-1/2” 3-3/4” 8-1/4” Ø2-3/4” 8-1/4” PYRAMID CAP 3-3/4” 3-3/4” BALL CAP* NO. 57085 6-3/4”

3/4” NO. 57087

3-3/4” *Must be used with Flat Cap 2’-8”

1/2” 1” 11” 6” 11” 3-7/8” BOTTOM RAIL 9-1/2” 4’-0” FIVE SIDED 2” Ø2-3/4”3-7/8” 8-1/8” PYRAMID CAP 8-1/8” 3-3/4” 8-1/4” FLAT CAP NO. 57083 NO. 57086 29 Ø2-3/4”6” 3-3/4”

6” 1’-0”

5” SQ

5” SQ 3-1/2” 3-1/2” Balustrade System Balustrade System

Balustrade6" Balustrade System System7" Balustrade Styles System 12" Balustrade System

Wales Square Windsor Edinburgh Wessex Leslie Anne Caroline Katharine Kennedy Madison

Katharine Caroline Leslie Anne

5-1/4” 7" Balustrade5-1/4” System 5-1/4” 5-1/4” 5-1/4” 5-1/4” 5-1/4” 6-1/2” 9-1/2” 9-1/2” 2-1/2” 5-1/4” 4” 5-1/4” 6-1/2” 6-1/2” 2-7/8” 2-1/2” 1’-4” 2’-11” 3’-0” 1’-9” 3’-4” 1’-4” 2’-5” 2’-7”

7-1/4” 1’-10-3/4” 2’-4” 1’-9” 1’-4” 2’-10” 1’-10-3/4” 5/8” 1’-11” 1’-10-3/4” 1’-9” Ø4-1/2” 2’-2” 7-1/4” 4-7/8” 9-1/2” 5/8” 6-1/2”

4-1/8” 8” 6-3/4”

5-3/4” Ø4-1/2” 9-1/2” 6-1/2” 4-7/8” 2-1/2” 2-3/4”

4-1/4” Ø6-1/2” BALUSTER BALUSTER EXTENDED 8” 5-3/4” BALUSTER BALUSTER BALUSTER BALUSTER BALUSTER EXTENDED EXTENDED 58041 58045 58043 58046 BALUSTER 58033 58034 BALUSTER 58042 5-3/4” 58044 58035

7-1/4” Ø4-1/2” 5-3/4” 8” 5-1/2” 5/8” 6” 4” Ø4-1/2” Ø4-1/2” TOP RAIL 8-1/4” 5-1/2”

7-1/4”4-7/8” 1”

3/4” BALL CAP*

5-3/4” 7-1/4” NO. 57087 1-1/2” 6” BOTTOM RAIL *Must be used with Flat Cap Top View 6-1/4” Five Sided Angle Newel 7" Balustrade System 9-1/2”

Maximum 5-3/4” 6-1/4” 2” SKU M O/C 2’-8” Spacing 3-1/2” 8-1/4” FLAT CAP NO. 57086 1” 1/2” Ø4-1/2” 3-1/2” 58041 13/8" 11/4" 61/2" SUPPORT BLOCK 4’-0” 5-1/2” NO. 58012 9-1/2”

58042 13/8" 11/4" 61/2" 1” 58045 13/8" 11/4" 61/2" 7-1/4” 2” 8” 8-1/4” 58043 13/8" 11/4" 61/2" PYRAMID CAP NO. 57085 58044 13/8" 11/4" 61/2" 6-3/4” Ø6-1/2” 6-1/4” 8”

58046 13/8" 11/4" 61/2" 11” 1’-0”

11” 58091 15/16” 13/8" 55/8" 3-1/2” PANEL NEWEL AND FIVE SIDED Poly moulding 58092 15/16” 13/8" 55/8" CORNER NEWEL 8-1/8” PYRAMID CAP PLAIN NEWEL provided loose 30 57089 8-1/8” FIVE SIDED 58093 15/16” 13/8" 55/8" 8” NO. 57083 57088 ANGLE NEWEL to be installed 57084 on job site. 4”

1” 1-1/2” 2’-8” 1” 1/2” 4’-0” 1’-0” Curved BalustradeSystem Balustrade System less than 2". The spacebetweenthebottom railandthesubstrateshould notbe the locationwhere thesystem isinstalled. that doesnotmeet therequirementsof governing buildingcodein Crown Column system. building codesbefore ofyour thedesignandinstallation balustrade Crown Column Curved BalustradeSystem BUILDING CODES 6"and7"Systems Only • • • • • • • • Crown Column to 108" in10' lengths. and bottom railstyleisavailableinradiusfrom60" an elegant finishingtouch toany .Each top 1’-3/8” 1’-3/8” 1’-3/4” 1’-3/8” 1’-3/8” 1’-3/4”

9” 9” 9” 9” 12" BalustradeSystem 12" BalustradeSystem Modified Radius Available in60"-1 25 Year Easy Installation Ready toInstallandP Primed White Low Maintenance 6", 7",and12" R BALUSTER 58051 Warranty 5-1/2” 3-1/2” 5-1/2” 5-1/2” Kennedy 3-1/2” 5-1/2” 6” ® ® 6” isnotresponsibleorliablefor any balustradesystem recomendschecking andnational alllocal, state, BOTTOM RAIL BOTTOM

TOP RAIL TOP 3-1/2” 1’-7” 3-1/2” 2’-2” ® BALUSTER CurvedBalustradeSystem willadd ail Styles 58052 Available in 08" Radius aint 5-1/2” 1’-7” 5-1/2”

EXTENDED 2’-6” BALUSTER 58 053

9-1/2” 1’-7” 9-1/2” 3’-2” Must purchase and newels separately. N 63058 NO. NO. 57093 NO. O. 57096 *Must be used be *Must with Flat Cap Flat with BALL CAP* BALUSTER 58054 7-1/4”

Madison D 10 D 12 D 7”

3-1/2” 1’-9” ” ” 3-1/2”

BALUSTER

3/8” 2’-4” 58055 7-1/4” 1’-4-1/4” 1’-4-1/4” 1’-3” 1’-3” 6-1/2” 1’-9” 6-1/2” EXTENDED 1-7/16” BALUSTER 2’-10”

2-7/8” 9/16” 58 7-1/4” 056 BOTTOM RAIL BOTTOM BALUSTERS RAIL TOP CLASSIC CAP 1’-2-15/16” NO. 57097 NO. 11-1/4”

2” 1”2” 9-1/2” 1’-9” 9-1/2”

3’-4” Ø1’-3/4” PYRAMID CAP PYRAMID Typical Assembly NO. 57092 NO. CAP FLAT

NO. 57091 NO. 1’-0” 2’-8” 4” 4-7/8” SUPPORT BLOCK on job site. installed be to provided loose Poly moulding not pre-drilled. NOTE: Rails are NO. 58014 NO. 1” 1’-3/8” 1’-3/8” 1’-3/4” 1’-2” 1’-2” 9” 9” 12" BalustradeSystem 1” 58054 58056 58055 58053 58052 58051 K M SKU

1/2” 5-1/2” 1’-2” 3-1/2” 5-1/2” 4’-0” 6”

23/4" 23/4" 13/4" 13/4" 13/4" 13/4" Ø1’-3/4” 1’-0” 2’-8” 4” PYRAMID CAP PYRAMID PANEL NEWEL AND PLAIN NEWEL PLAIN Maximum CORNER NEWEL Spacing /"71/2" 1/2" /"71/2" 1/2" /"71/2" 1/2" 0" 0" 0" NO. 57095 NO. 57094 1” 1’-2” 1’-2” 1” 71/2" 71/2" 71/2" O/C

1/2” 1’-2” 4’-0” 31 Outdoor Living

Crown Column® offers a broad line of durable, low maintenance outdoor living products. Whether you are framing in an outdoor oasis or extending your living space outdoors, Crown Column® has the products to turn your dreams into a reality.

32 Pergola Collection

Fiberglass• Wind load rated Pergolas • Low maintenance • Ease of installation • Pre-finished with ChromaGuard® engineered coating • Will not rot, check or twist • Hollow rafter can act as conduit for wiring • Stability

STOCK PERGOLAS

Crown Column® manufactures fiberglass pergola kits using pultrusion technology to produce the strongest yet lightest structures available with a Limited Lifetime Warranty. Our structural fiberglass components are strong, light weight, and provide a higher level of aesthetic quality than vinyl or wood pergolas.

Our stock pergola kits are prefinished white with Spartan Tails and square or no-taper round pultruded fiberglass columns without neck moulding. Optional wind-load/ plates are available.

Square Pultruded Column Pergola Kits Overhead Column Column Size Size Center Freestanding No-Taper Pultruded Round Column Pergola Kits 12’ x 12’ 8’ x 8’ 8” x 8’ Overhead Column 14’ x 14’ 10’ x 10’ 10” x 8’ Column Size Size Center 16’ x 16’ 12’ x 12’ 10” x 8’ 12’ x 12’ 8’ x 8’ 8” x 8’ Attached NEW 14’ x 14’ 10’ x 10’ 10” x 8’ 12' x 10' 8' x 8' 8" x 8' 16’ x 16’ 12’ x 12’ 10” x 8’ 14' x 10' 10' x 8' 10" x 8' Standard Round Wind-Load/Deck Plate* 8” Standard Square Wind-Load/Deck Plate* 8” Standard Round Wind-Load/Deck Plate* 10” Standard Square Wind-Load/Deck Plate* 10” *Deck screws not included *Deck screws not included

Stock fiberglass pergolas are single support rafter with header style. 33 Pergola Collection

Available with choice of 10" x 8' SpunCast™ Round Tapered or 10" x 8' Pultruded Square columns and includes whitePredesigned ChromaGuard® engineered Fiberglass coating and Napa Rafter Tails Pergolas

NEW

Freestanding Pergola Attached Pergola Overhead Dimensions Overhead Dimensions 12’ x 12’ 14’ x 18’ 18' x 12' 20' x 18' 12' x 10' 14' x 14' 18' x 10' 20' x 16' 12' x 14' 14' x 20' 18' x 14' 20' x 20' 12' x 12' 14' x 16' 18' x 12' 20' x 18' 12' x 16' 14' x 22' 18' x 16' 20' x 22' 12' x 14' 14' x 20' 18' x 14' 20' x 20' 12' x 18' 16' x 12' 18' x 18' 22' x 12' 12' x 16' 16' x 10' 18' x 16' 22' x 10' 12' x 22' 16' x 14' 18' x 22' 22' x 14' 12' x 18' 16' x 12' 18' x 20' 22' x 12' 14' x 12' 16' x 16' 20' x 12' 22' x 16' 12' x 20' 16' x 14' 20' x 10' 22' x 14' 14' x 14' 16' x 18' 20' x 14' 22' x 18' 14' x 10' 16' x 16' 20' x 12' 22' x 16' 14' x 16' 16' x 22' 20' x 16' 22' x 22' 14' x 12' 16' x 20' 20' x 14' 22' x 20'

Predesigned fiberglass pergolas are double support rafter, no header style NEW Semi-Custom Options* COLORS Make our stock or predesigned pergolas your own by selecting from our semi-custom options. Rafter Tail Options Color Options

SPARTAN WINDSOR KENSINGTON WHITE LINEN FOG CREAM

ROMAN CRAFTSMAN NAPA LATTE ESTATE SADDLE JAVA

Fan bracket also available *Adds a week to the shipping time CONTEMPORARY CANNON MOSS TRICORN COCOA 34 Color may differ slightly from photos due to different print settings. Please call for more information. ™ NEW Mor-ShadeCrown Column® offers three ways for to increase Fiberglass the shade provided by yourPergolas pergola: Mor-Shade™ Canopy, Purlin, and Shade Sail. Each option is specifically designed to be an attractive accent to your pergola and create a shelter from the sun's rays.

The combination of a Crown Column® pergola and a Mor-Shade™ shade solution is the ultimate combination of beauty, function, and versatility to create your outdoor living .

MOR-SHADE™ CANOPY

Designed for ease of use, our exclusive Mor-Shade™ Canopy slides on a wired sydtem that is ready to install out of the box. The unique modular design is easy to install, just like our fiberglass pergolas, to enhance your outdoor living experience. Designed to quickly lock individual canopy panels in place to provide shelter from the sun or remove penels as quickly when the sun goes down.

MOR-SHADE™ SHADE SAIL

Canopy & Sail Color Options The Mor-Shade™ Shade Sail is a solid fabric cover that is easy to install and remove based on weather conditions and time of year.

GINKGO SLATE TRESCO GINGER MOR-SHADE™ PURLIN

Increase the size and TRESCO BRICK CHARCOAL MARINE BLUE number of purlin on the GREY top of the pergola to Color may differ slightly from photos due to different print settings. Please call for more information. increase the amount of shade provided by the NOTE: MorShade™ Canopy and Shad Sail must be removed when severe weather is anticipated or the pergola. warranty is void.

35 Pergola Collection

Predesigned• High quality cellular PVC PVC Pergolas • Includes complete installation kit

• Includes a choice of 10"x8' Round Tapered SpunCast™ Columns or 8"x8' Square SpunCast™with cap and base sets and Classic rafter tails • 25 Year Limited Warranty

• Ready to prime and paint

PVC PERGOLAS

Pergolas add distinction to any outdoor environment. Made with high quality cellular PVC and SpunCast™ columns, Crown Column® offers high-quality, beautiful pergolas. Our cellular PVC pergolas are easy to install and low-maintenance.

NEW

Arched Top Cellular PVC Pergolas Flat Top and Attached Cellular PVC Pergolas Overhead Overhead Column Center Column Style Column Center Column Style Dimension Dimension 14' x 14' 10' x 10' Round/Square 14' x 14' 10' x 10' Round/Square 14' x 16' 10' x 12' Round/Square 14' x 16' 10' x 12' Round/Square 14' x 18' 10' x 14' Round/Square 10' x 14' 14' x 18' Round/Square 16' x 16' 12' x 12' Round/Square 16' x 16' 12' x 12' Round/Square 16' x 18' 12' x 14' Round/Square 16' x 18' 12' x 14' Round/Square

36 Predesigned PVC pergolas are double support rafter, no header or purlin style. UnderstandingPergola Dimensions (Length x Width)Pergola Dimensions Use these examples for all types of pergolas.

ATTACHED

FREE STANDING

37 Outdoor Living

OutdoorCrown Column® manufactures Living its outdoor Products living products with the same materials used in our high performance Fiberglass Pergolas. They are low maintenance, easy to install, and will not rot, check, or twist.

PRIVACY SCREENS

Add outdoor privacy with Crown Column's Privacy Screens. Perfect for pool or dining areas or multi-family applications. Two standard sizes are available. Corner Privacy Screen

Size Column 12' Privacy Screen 10" x 8' Square Pultruded 24' Corner Privacy Screen 10" x 8' Square Pultruded

ENTRY ARBOR

Formalize an entrance or dress up a garden area with Crown Column®'s Entry Arbors. Two standard sizes are available.

Size Column Center Column 12' x 3' Arbor 8' 8" x 8' SpunCast™ Round 12' x 3' Arbor 8' 8" x 8' Pultruded Square

EYEBROW / TRELLIS

Designed to complement the architecture of your home, Crown Column®'s Eyebrow/Trellises are available in three standard sizes.

Length 11' Eyebrow 18' Eyebrow 20' Eyebrow 38 • Pre-finished white or blue • Hidden Fastening (Blind Nail) • Can be Installed on 24” Centers CEILING Synthetic Porch • Can be easily painted

Pre-finished with a capstock, the Synthetic Porch Ceiling is another low maintenance product from Crown Column®. It can be used as a beaded ceiling or as an accent to any room as a dramatic wainscoting. You and your family will enjoy a seamless and stylish porch ceiling for years to come. Once it’s installed, it offers lasting beauty so you can sit back, relax, and enjoy the good life. Pre-finished white or blue and ready to install in 12 ft. and 16 ft. lengths, it can also be painted to match the look and feel of your home. Then, to finish it off, choose from available ceiling mouldings. Blue White

Bed Moulding* Lattice Moulding* Crown Moulding* *Mouldings require painting.

39 Crown Millwork Crown Millwork

Polyurethane brackets provide an inexpensive and low maintenance way to dress up your home. Choose from a wide variety of styles. Brackets can be used with either synthetic or wood posts. Enjoy a low-maintenance way to add Polyurethanestyle and decor to your front porch. Brackets

Adams Bridgeport Chelsea Wood Chippendale Drury Lane H-171/4” W-23/4” P-131/4” H-151/4” P-151/4” H-133/8” P-13” H-143/4” P-143/4” H-129/16” P-101/4” 70720 70860 70840 70770 70890

Floral Bracket Hessian Lady Lucille Lions Portsmouth H-131/4” P-10” H-157/8” P-157/8” H-133/4” W-21/2” P-93/4” H-15” P-14” H-131/2” P-131/2” 70500 70820 70710 70740 70810

Princess Roanoke Seaside Princess Anne of Wales House Bracket Smithson H-141/2” W-4” P-91/4” H-19” P-15” H-16” P-91/4” H-1113/16” P-1113/16” H-153/8” P-153/8” 70610 70520 70735 70750 70850

Victoria Sun Rays Townsend Trillium Saint Martin H-15” W-4” P-91/2” H-121/4” P-121/4” H-91/8” W-31/2” P-63/4” H-227/8” P-131/4” H-141/16” P-1211/16” 70510 70730 70800 70790 70550

Seaside Fleur de lis Waverly Belle Grande Victoria Centerpiece Centerpiece Centerpiece Centerpiece Centerpiece H-57/8” L-201/2” H-711/16” L-24” H-6” L-20” H-515/16” L-241/4” H-53/8” W-2” L-20” 70760 70725 70880 70780 70870 40 H = Height W = Width P = Projection L = Length Crown Millwork

Add character to any room with our ceiling medallions. With so many styles and sizes to choose from, you can be sure to find the products that have the look and feel your room needs. These historically accurate accents are Medallionslightweight, durable, easy to install, and virtually maintenance free.

CABOT NO. 79450 D 443/4”

EGG AND DART BRISTOL ANSLEY NO. 79487 D 305/8” NO. 79472 D 293/4” NO. 79483 D 291/2” NO. 79486 D 24” NO. 79471 D 235/8” NO. 79482 D 233/8” NO. 79485 D 181/2” NO. 79470 D 161/8” NO. 79481 D 16” CORNWALL ASHTON NO. 79140 D 143/4” NO. 79170 D 171/2”

MONTGOMERY NO. 79090 D 93/4”

CHARLOTTE NO. 79478 D 24” BELLE MEADE NO. 79120 D 121/4” STRASBOURG FLORENTINE NORWICH NO. 79475 D 27” NO. 79465 D 281/2” NO. 79455 D 313/8” (25/8” Recessed Depth)

CHERUB NO. 79469 D 223/16”

VENETIAN MONTICELLO LADY SARA BILTMORE QUEEN ANNE NO. 79300 D 31” NO. 79280 D 277/8” NO. 79461 D 235/8” NO. 79479 D 253/4” NO. 79477 D 21” NO. 79310 D 211/4” NO. 79282 D 233/4” NO. 79460 D 18” NO. 79480 D 163/16” D = Diameter 41 Crown Column® offers a program to help you with your take offs! Drop1. Send your plans usingOff one of thesefor two methods: Take Off! • Email your plans to [email protected] • Mail your plans to Crown Column® P.O. Box 589 Troy, AL 36081 Attn: Architectural Department 2. Once we have your plans, we will provide a detailed product list and drawings for your project.

d for CODES AND COLUMNS:

SPECIFYING SURFACE BURNING CHARACTERISTICS COLUMNS: SAMPLE GUIDE Code compliance requires that column material meet the SPECIFICATION  test requirements of ASTM E 84 (Standard Test Metho Surface Burning Characteristics of Building Materials). CLASSICAL ORDERS  Columns must achieve:   Flame Spread Index of less than 25; and  Smoke Developed Index of less than 450, which meets  The definitive statement of how column  components look and function, organized into    a Class A Interior Finish Rating. five classic architectural orders, is in a book    written by Giacomo Barozzi de Vignola    published in 1562.       10 Vignola presented detailed examples and         9 measurements of ancient to   8        illustrate the precise profiles, details and 7 dimensions of the orders he characterized as   6    Tuscan, Doric, Ionic, Corinthian, Composite.  5   4    3     2 ORINTHIAN COMPOSITE  1   0 TUSCON DORIC IONIC C 

®

Crown Column® offers a one-hour • A millennia-long history in many of the world’s greatest buildings has given the column continuing education course that is a special significance. availableCrown as a “lunch andColumn learn”. • ContinuingEven a drawing of a column can suggestEducation “architecture”, as in the CourseCourse logo for the American For more information contact Institute of Architects. [email protected]. • Today’s column can be manufactured to the most exacting classical dimensions or to This course is AIA and AIBD certified. an original new design combining components in a way never done before.

42 HB&G® Building Products, Inc.’s Product Limited Warranties

HB&G Building Products, Inc. extends the following Limited Warranty (the “Warranty”) to original purchasers of its materials and components (the “Product”). An “Original Purchaser” is a retailer, distributor, builder or supplier that purchases the Product or the first individual homeowner who purchases the Product from a retailer, distributor, builder or supplier, whether or not the Product has been installed. This Warranty is not transferable to subsequent owners of the property on which the Product has been installed. Excepting finishes, which are addressed below, HB&G Building Products, Inc. warrants that when used under conditions of normal use and service and when properly installed in conformance with all HB&G installation instructions and all governing building codes, the Product shall conform to the specifications set forth in HB&G’s published specifications in effect as of the date of shipment by HB&G and shall be free from defects in material and workmanship. Should a Product prove defective after review by HB&G Building Products Inc. of any claim, HB&G will provide replacement parts of those materials that it deems defective after its review. Installation and labor costs are NOT covered under this Warranty. Limited Warranty Time Periods: Product Single Family Residential Commercial/MF Residential SpunCast & Pultruded Fiberglass Columns Limited Lifetime 25 Years cPVC Columns & Column Wraps 25 Years 10 Years Aluminum Columns Limited Lifetime 25 Years Wood Columns 1 Year 1 Year Synthetic Porch Post 25 Year 10 Years Wood Turned Post 1 Year 1 Year Vinyl Post Wrap Limited Lifetime 25 Years cPVC Railing 25 Years 10 Years Vinyl Railing Limited Lifetime 25 Years Polyurethane Balustrade/Railing 25 Years 10 Years cPVC Ceiling 25 Years 10 Years cPVC Pergola 25 Years 10 Years Fiberglass Pergola and Outdoor Living Products Limited Lifetime 25 Years Vinyl Pergola Limited Lifetime 25 Years Polyurethane Brackets & Medallions 10 Year 10 Year

Finish: HB&G warrants that the finish it has applied to the product will be free from defects. When used for its intended purpose, properly installed and maintained according to HB&G’s installation instructions, for a period of 10 years from the date of shipment (a) will not peel (b) will not chip and (c) will not crack. This Warranty does not cover against fade or chalk of the Finish due to normal weathering. Normal weathering means exposure to sunlight and extremes of weather and atmosphere, which will cause any painted surface to gradually fade, chalk or accumulate dirt over time. This Warranty will cover HB&G’s finish against excess color change beyond normal weathering. Excess color change means a change in color of HB&G’s Finish by greater than four (4) delta E units. HB&G shall have the sole discretion to determine whether the Product exhibits excess color change. Only “finishes” applied by HB&G are covered under this Warranty; for purposes of this Limited Warranty, “finish” means any paint or coating or cap stock applied by HB&G. With respect to any paint or other coating applied to the Product after shipment by HB&G, Original Purchasers must look to the warranty or warranties, if any, of the paint or coating manufacturer of such paint or coating for recourse as to defects or any other issue concerning such post-shipment, applied coatings. General Conditions & Exclusions: This Warranty is not transferable and it is subject to the following general conditions and exclusions described below: What is not covered: There are certain conditions or applications over which HB&G Building Products Inc. has no control. This Warranty does not cover defects or problems as a result of such conditions or applications, including, but not limited to the following: • Damage caused by improper installation, use, applications or maintenance. • Damage caused by environmental conditions or use that exceeds design standards. • Damage caused by accidents, Acts of God, abuse, vandalism, animal activity plant or vine growth, or any other external force. • Damage resulting from mishandling in transit. • Damages resulting from the failure to apply and maintain a finish or to properly finish to any Product. • Damages caused by lack of routine maintenance, including, but not limited to painting and cleaning the product as needed. • Installations that are not compliant with HB&G Building Products, Inc.’s instructions and all governing building codes and common building practices. • Modifications to the column, such as splitting the column, by anyone, including but not limited to a retailer, distributor, builder, or supplier. • Normal weathering, chalking, fading, discoloration, mold/mildew buildup, or the effects of atmospheric pollutants or sea spray. • Non-Factory Applied finishes, applied sealants or caulking. • Installation or labor costs. • Improper Installation, including but not limited to installation in violation of building codes. • Any product not manufactured by HB&G Building Products, Inc. • Damage or distortion to the Product caused by twisting, bowing or other movement of the structure or structural supports to which the Product is attached. • Color matching of the Product material and any other HB&G Building Products, Inc. material. Disclaimer. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF; HB&G BUILDING PRODUCTS, INC. MAKES NO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE WHATSOEVER WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. Entire Agreement. By purchasing or using the Product, you agree that you have not and are not relying on any statement, representation, warranty, or agreement, including any representations, warranties or agreements arising from statute or otherwise in law, except for the warranties and representations expressly contained in ® this Limited Warranty. Exclusive Remedy. HB&G Building Products Inc.’s provision of replacement parts is its sole liability and entire obligation under this Limited Warranty; Original Purchaser’s remedies shall be limited solely and exclusively to the replacement of defective or non-conforming products. HB&G Building Products, Inc. shall not be responsible for incidental or consequential damages relating to the purchase or use of the Product. Contractual Statute of Limitations. No action arising out of any claimed breach of this Limited Warranty by HB&G Building Products, Inc. may be brought more than ninety (90) days after the claim has accrued. Crown Column Continuing Education Course Rights May Vary By State. This warranty gives you specific legal rights and you may have other rights, which vary from state to state. Some states do not allow the exclusions or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty is only applicable in the United States & Canada.

43 HistoryThe classical standards of of CrownArchitectural Column® are based on the Columns five orders of architecture, as written by Giacomo da Vignola, one of the foremost Renaissance architects in . The five classical orders are Doric, Ionic, Corinthian, Composite and Tuscan. Each comprises the column and the , and each has a distinctive character as to proportions and detail.

10

9

8

7

6

5

4

3

2

1

0 DIVISOR TUSCAN DORIC IONIC CORINTHIAN COMPOSITE

Crown Column® products can be purchased from:

P 888.862.0880 P 256.538.1949 Proudly made in the U.S.A. F 256.538.1722

www.crowncolumn.com

© 2017 HB&G BUILDING PRODUCTS, INC. CC2017v1