NATURAL SLATE Construction Solutions Globally Proven Sprayer

Home , Slate

PORCELAIN, TERRA COTTA CONCRETE AND SANDSTONE AND OTHER CERAMIC AND AND CLAY SLATE TRAVERTINE LIMESTONE GRANITE MARBLE MASONRY FLAGSTONE QUARRY TILE PRODUCTS 34 Maintenance & Care Instructions andProductDataSheetsaresubjecttochangewithoutnotice. Forlatestrevision,checkourwebsiteatwww.laticrete.comMaintenance &CareInstructions ©2016 LATICRETE oftheirrespectiveowners. Inc.Alltrademarksshownaretheintellectual properties International, LATICRETE Inc.,OneLATICRETE International, Bethany, ParkNorth, CT06524-3423USA Refer todatasheetDS212.0formoreinformation. towel. cleanwithadry 5. Wipe pad. 4. Repeatforheavilysoiledareasusinganon-abrasivescrubbing towel,lintfreeclothorsponge.Noneed to rinse. cleanwithadry 3. Wipe 2. Sprayorpourdirectlyontosoiledarea. 1. To refill24oz.(709mL)spraybottle,useafunnel. pets outoftheareaduringapplicationanddrying. be cleanedaresweptorvacuumedtoremoveloosedebris.Keepchildrenand to Read entirelabelbeforeusing.Useonlyasdirected.Besureallsurfaces To-Use) STONETECH RevitalizerCleanerandProtector(Ready- completelybeforeusing. 5. Letareadry forheavilysoiled areas. 4. Repeatifnecessary lightlyandremoveanyexcesscleaner.3. Rubsurface Noneedtorinse. 2. Applydilutedsolutionwithadampmop,towel,spongeorlowpressure 1. DiluteSTONETECH pets outoftheareaduringapplicationanddrying. be cleanedaresweptorvacuumedtoremoveloosedebris.Keepchildrenand to Read entirelabelbeforeusing.Useonlyasdirected.Besureallsurfaces STONETECH protector: For routinecleaningofnaturalslateusingacleanerand granite surfaces. has twomaintenancecleanerssuitableforunpolished,honedortextured will helpmaintainlargerinstallations.STONETECH pad oranauto-scrubber brush or floors. Forcommercialapplicationsaswingmachinefittedwith vacuumishelpfulforcleaningbig traditional mopandbucket.Awet/dry spraymops,and canbeaccomplished usingspongesandbrushes, surfaces cleaningsofthesetravertine Both routinedampmoppingandmonthlyscrub Maintenance Cleaning theslate,groutordegradinganyappliedsealers. assurance ofnotharming forstone,tileandgroutmaintenanceisthebest specifically formulated applied sealer, adverselyaffectingstainrepellency. Theuseofagentlecleaner andmayalsodegradeany damage somestone,tileand/orgroutsurfaces Highly alkaline,acidic,ammoniabased,abrasivecleaners,orbleachmay these processesremainthesame;onlyscalewillchange. Regular sweepingandlightdampmoppingisadvisable.Forlargerinstallations staining materialsneedtobecleanedupinareasonableperiodoftime. intensive maintenanceandcareprocesses.Spills,foodotherpotential other soilingfrombuildingup.Exteriorinstallationswilloftenrequiremore dustand willinvolvekeepingdirt, Routine, dailymaintenanceofslatesurfaces REGULAR MAINTENANCEANDCARE NATURAL SLATE Construction Solutions Globally Proven sprayer. wateraccordingtothe followingmixingchart: warm Spray Refill Light Duty determine easeofapplicationanddesiredresults.Avoid skinandeyecontact.Alwayswearappropriatesafetyequipmentduringproductuse. NOTE: Use Forallrecommendedproducts:Readtheentireproductlabelbeforeusing.Useonlyas directed.Alwaystestinasmallinconspicuousareawith24-hourcuretimeto ® Revitalizer ® Revitalizer Cleaner &Protector(Concentrate) STONETECH STONETECH ® ® CleanerandProtector(Concentrate)with 1 part 1 part CleanerandProtector ® Revitalizer ®

® MAINTENANCE&CAREINSTRUCTIONS Warm Water 4 parts 1 part ®

and pets out of the area until treated surface isdry.and petsoutoftheareauntiltreatedsurface isdry.well-ventilated duringapplicationanduntilthesurface Keepchildren should bebetween50°F-80°F(10°C26°C).Ensure thattheareais temperature one hourafterstandingwaterhasbeenremoved.Surface coatings. STONETECHHeavyDutySealermaybeappliedtodampsurfaces iscleanandfreeofwaxes and desiredresults.Makesuresurface easeofapplication inconspicuous areawitha24-hourcuretimetodetermine Read entirelabelbeforeusing.Useonlyasdirected.Alwaystestinasmall Pre-Grout SealerApplication STONETECH HeavyDutySealer application ofsealerisgenerallysufficientasapre-groutingtreatment. aid incleanupaftergrouting.Formoststonesthatdarkenwhenwetasingle minutes, thestoneisabsorbentandapplyingasealerpriortogroutingmay andwaitingfor5 the slatedarkensafterapplyingwatertostonesurface toidentifyifthestoneisporous.If A simplewatertestcanbeperformed may benefitfromsealingpriortogrouting. grouting. Slatecanbeporousandissusceptibletogroutstaining Grouting cleanupisofteneasierwhenthestonesealedpriorto NEW INSTALLATION PRE-GROUTTREATMENT Refer todatasheetDS211.0formoreinformation. towel. cleanwithadry 4. Wipe pad. 3. Repeatforheavilysoiledareasusinganon-abrasivescrubbing towel,lintfreeclothorsponge.Noneedtorinse. cleanwithadry 2. Wipe 1. Sprayorpourdirectlyontosoiledarea. drying. concentrate. Keepchildrenandpetsoutoftheareaduringapplication contact withproduct.Wear protectiveeyewearandgloveswhenhandling cleaned aresweptorvacuumedtoremoveloosedebris.Avoid skinandeye tobe Read entirelabelbeforeusing.Useonlyasdirected.Besuresurfaces STONETECH Stone&Tile Cleaner(Ready-To-Use) completelybeforeusing. 4. Letareadry 3. Cleanentireareawithmop,changingcleaningsolutionoftentoensurethat 2. Applymixedsolutionwithadampmop,spongeorappropriateprofessional water 1. DiluteSTONETECHStone&TileCleaner(Concentrate)withwarm drying. concentrate. Keepchildrenandpetsoutoftheareaduringapplication contact withproduct.Wear protectiveeyewearandgloveswhenhandling cleaned aresweptorvacuumedtoremoveloosedebris.Avoid skinandeye tobe Read entirelabelbeforeusing.Useonlyasdirected.Besuresurfaces STONETECH Stone&Tile Cleaner(Concentrate) For routinecleaningofslateandgroutusingacleaner: Heavy Duty soil is not redeposited. Wipe orrinsecleanedarea. soil isnotredeposited.Wipe cleaning equipment. according tothefollowingmixingchart: Light Duty Use n 1.888.786.6343 STONETECH Stone&Tile Cleaner (Concentrate) 1 part 1 part n +1.203.393.0010

n Warm Water www.stonetech.com 32 parts 64 part RESTORATIVE DEEPCLEANING Refer todatasheetDS279.0formoreinformation. 8. Cleantoolsusedduringapplicationwithwater. 7. Allowsealertocurefor24hourspriorgrouting. Ifasecond 6. Asecondcoatmaybeneededforporous,absorbentsurfaces. withcleanabsorbenttowels. theentiresurface 5. Thoroughlywipedry for10-15minutes.Duringthis 4. Allowthesealertopenetratesurface 3. LiberallyapplyanevencoatofSTONETECHHeavyDutySealerusingapaint notintendedtobetreated. 2. Maskoffsurfaces 1. Ensurecapisclosedandsealed,shakewellbeforeuse. 4. Remove STONETECH KlenzAll Cleaner using a clean cloth, wet/dry vacuum 4. RemoveSTONETECHKlenzAllCleanerusingacleancloth, wet/dry orfloormachineasneeded. brush withascrub 3. Lightlyscrub 2. Applymixedsolutionwithamop,cleanclothorlow-pressuresprayer. Avoid according tothefollowingmixingchart: water 1. DiluteconcentratedSTONETECHKlenzAll™Cleanerwithwarm duty cleaningwilldegradeorstripmanysealersfromtheapplication. however,process shouldnotdamagethestonesurface, thistypeofheavy cleaningcircumstances.This preparation forresealingorspecializedsurface cleaningprocesswhichisdonein The followingisarestorativesurface pets outoftheareaduringapplicationanddrying. isdry.well-ventilated duringapplicationanduntilsurface Keepchildrenand long sleeves,andpantswhilehandlingconcentrate.Ensureworkareais Avoid skinandeyecontactwithproduct.Wear protectiveeyewear, gloves, tobecleanedare sweptorvacuumedtoremoveloosedebris. all surfaces easeofuseanddesiredresults.Besure inconspicuous areatodetermine Read entirelabelbeforeusing.Useonlyasdirected.Alwaystestinasmall STONETECH KlenzAll™Cleaner(Concentrate) soil,ortoprepareforresealing: For cleaninggrease,oil,dirt,dry options: Depending onthetypeofsoilingorstaining,selectonefollowing sealers fromtheapplication. slate, however, thesetypesofheavydutycleaningmaydegradeorstripmany ofthe circumstances. Thesecleaningprocessesshouldnotdamagethesurface cleaning are doneinpreparationforresealingorspecializedsurface acceptable appearance. Restorative cleaningprocesseswillhelpreturnthesesurfacestoamore Stone, tileandgroutinstallationscanbecomeheavilysoiledovertime. Medium Duty application asdirectedinsteps3-5. coat isrequired,itshouldbeappliedwithin30-40minutesfromtheinitial NOT ALLOWSEALERTOCOMPLETELY DRY ONTHESURFACE. wetwithsealer,time, keepthesurface addingmoresealerasneeded.DO pad, roller, orlowpressuresprayer. brush or dampmop. applying cleaneronunintendedsurfaces. Heavy Duty Light Duty Use STONETECH KlenzAll™ Cleaner (Concentrate) The following restorative surface cleaningprocesses The followingrestorativesurface 1 part 1 part 1 part 2 parts 4 parts 8 parts Warm Water MCI 115 DS-211.4-1016 11.3 10.7 pH 11 Natural Slate – MCI 115 continued 5. Rinse area well with clean water. Allow area to dry completely. 4. Application time will vary depending on type of coating being removed. For cleaning and removing mold and mildew: 6. Some surfaces may require additional cleaning. If so, repeat steps 2 – 5 Approximate application times are as follows: STONETECH Mold & Mildew Stain Remover above. Coating Type Application Dwell Time Read entire label before using. Use only as directed. Always test in a small 7. Reseal cleaned area with an appropriate STONETECH® sealer (e.g. inconspicuous area to determine ease of use and desired results. Be sure STONETECH Heavy Duty Sealer). Sealer, wax or varnish 30 – 60 minutes surfaces to be cleaned are swept or vacuumed to remove loose debris. Avoid Refer to data sheet DS215.0 for more information. Polyurethane or acrylic 1 to 2 hours skin and eye contact. Wear protective eyewear and gloves. Keep children and pets out of the area during application and drying. Do not mix this product Removal of efflorescence, mineral deposits, and calcium based Epoxy Grout Haze 1 to 2 hours with other household cleaners or metals. staining: 1. Spray STONETECH Mold & Mildew Stain Remover directly on soiled areas. STONETECH® Restore™ Acidic Cleaner 5. Do not let STONETECH Heavy Duty Coating Stripper dry on the surface. If STONETECH Heavy Duty Coating Stripper starts to dry, add additional Avoid applying onto unintended surfaces. Read entire label before using. Use only as directed. Always test in a small product to keep surface wet. 2. Clean surface with non-abrasive sponge or stiff nylon brush as needed. inconspicuous area to determine required dilution and results. Be sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Heavy 6. Agitate surface with a nylon scrub brush or pad after testing a small area 3. Rinse area well with clean water. first to make sure that brush or pad will not scratch the surface. Surface duty dilution may darken some surfaces. This acid-based cleaner will etch or 4. Repeat as needed for heavily-soiled areas. MARBLE damage most marble, limestone and travertine surfaces. Will etch or corrode can be wet with water to enable easier removal of coating. most metal surfaces. Avoid skin and eye contact. Wear protective eyewear, 7. Wipe up residual STONETECH Heavy Duty Coating Stripper with clean, dry Refer to data sheet DS 219.0 for more information. gloves, long sleeves, and long pants while handling product. Ensure work area cloth or wet mop. A wet/dry vacuum can be used for larger area. For oil stain removal: is well-ventilated during application and until surface is dry. Keep children and 8. Rinse surface well with clean water. pets out of the area during application and drying. STONETECH Oil Stain Remover

9. More than one application may be required, repeat steps 3 through 8 Read entire label before using. Use only as directed. Always test in a small GRANITE 1. Dilute concentrated cleaner with warm water according to the following when necessary. inconspicuous area to determine that the desired results will be achieved. mixing chart: 10. Surface traffic may begin 2 hours after removal of coating. Make sure surface is clean, dry, and free of waxes and coatings. Ensure that area is well-ventilated and keep children and pets away from the area during Use STONETECH® Restore™ Warm pH Refer to data sheet DS235.0 for more information. Acidic Cleaner (Concentrate) Water application and until surface is clean and dry.

For spot or small area deep cleaning: LIMESTONE Light Duty 1 part 16 parts 1.4 1. Using a plastic or wood spatula, stir thoroughly to mix the paste. STONETECH DeepKlenz™ Cleaner Medium Duty 1 part 4 parts 1.2 2. Apply a ¼” (6 mm) thick layer of paste to the stain. Ensure that the paste Read entire label before using. Use only as directed. Always test in a small extends at least 1” - 2” (25 – 50mm) beyond the edge of the stain. Heavy Duty 1 part 1 part <1 inconspicuous area to determine ease of use and desired results. Make sure all 3. Do not cover. surfaces to be cleaned are swept or vacuumed to remove loose debris. Keep

2. Mask off and protect any metals or other surfaces not intended to be children and pets out of the area during application and drying. 4. Allow 48 – 72 hours for STONETECH Oil Stain Remover to dry. TRAVERTINE treated. Apply mixed solution with a clean mop, or towel. 1. Thoroughly wet surface by directly spraying onto soiled area. 5. Using a plastic spatula, remove the dried STONETECH Oil Stain Remover 3. Agitate with a scrub brush or floor machine as needed. and discard. 2. Allow STONETECH DeepKlenz™ Cleaner to work on the surface for 5-10 4. Remove STONETECH Restore™ Acidic Cleaner using a clean cloth, wet/dry minutes. Do NOT allow product to dry on the surface. 6. Allow solvent to completely dry from the stone. vacuum or damp mop. 3. Lightly scrub with a stiff bristle brush to remove the surface contaminants. 7. If stain is not completely gone after drying, repeat process. 5. Rinse area well with clean water and wipe dry. 8. Clean up residue and tools with mineral spirits. 4. Rinse and wipe surface with clean cloth and warm water. Repeat as needed SLATE 6. Thoroughly rinse all metal surfaces with clean water. Clean and rinse for heavy soiled areas. 9. Once the surface is dry, reseal the cleaned area with an appropriate equipment with water. 5. Reseal cleaned area with an appropriate STONETECH sealer (e.g. STONETECH sealer (e.g. STONETECH Heavy Duty Sealer). 7. Reseal cleaned area with an appropriate STONETECH sealer (e.g. STONETECH Heavy Duty Sealer). Refer to data sheet DS 214.0 for more information.

STONETECH Heavy Duty Sealer). SANDSTONE AND

Refer to data sheet DS111.2 for more information. FLAGSTONE Refer to data sheet DS216.0 for more information. SEALING AND PROTECTING: For cleaning and removing soap scum: All slate is susceptible to staining from both oil and water-based materials and Removal of epoxy or single component grout hazes, stripping sealing will help protect the stone’s appearance. The cement grouts used in STONETECH Soap Scum Remover topical coatings, acrylic finishes or heavy waxes: slate tile installations will also be more stain resistant with the application of Read entire label before using. Use only as directed. Always test in a small STONETECH Heavy Duty Coating Stripper a penetrating sealer. inconspicuous area to determine ease of use and desired results. Be sure TERRA COTTA PRODUCTS Read entire label before using. Use only as directed. Test in a small surfaces to be cleaned are swept or vacuumed to remove loose debris. Avoid For interior and exterior natural look protection from water- and AND CLAY inconspicuous area to determine ease of application and desired results. Be skin and eye contact. Wear protective eyewear and gloves. Keep children and oil-based staining: sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. pets out of the area during application and drying. STONETECH® Heavy Duty Sealer Ensure work area is well-ventilated during application and until surface is dry. Keep children and pets out of the area until surface use resumes. Avoid contact 1. Spray STONETECH Soap Scum Remover directly on soiled areas. Avoid Read entire label before using. Use only as directed. Always test in a small with surfaces not intended to be treated. Avoid applying in direct sunlight. applying onto unintended surfaces. inconspicuous area with a 24-hour cure time to determine ease of application CONCRETE AND

and desired results. Allow new grout installations to cure for a minimum MASONRY Should not be used in extreme temperatures. Recommended application 2. Wipe surface with clean, dry cloth or scrub with stiff nylon brush as needed. temperature range is between 50°F - 90°F (10 °C - 32 °C). of 72 hours prior to application. Make sure surface is clean and free of 3. Rinse area well with clean water. waxes and coatings. Sealer may be applied to damp surfaces one hour after 1. SHAKE WELL BEFORE USING. Do not dilute before applying. 4. Wipe area dry with clean cloth. standing water has been removed. Surface temperature should be between 50°F - 80°F (10°C - 26°C). Ensure that the area is well-ventilated during 2. Wear rubber gloves and eye protection during handling and application to 5. Repeat as needed for heavily soiled areas. application and until the surface is dry. Keep children and pets out of the area CERAMIC AND

prevent skin and eye contact. QUARRY TILE Refer to data sheet DS229.0 for more information. until treated surface is dry. PORCELAIN, 3. Liberally apply an even coat of STONETECH Heavy Duty Coating Stripper over the required area with a paint brush, mop or paint pad. DO NOT 1. Ensure cap is closed and sealed, and shake well before use. APPLY WITH A SPRAYER. Immediately remove STONETECH Heavy Duty 2. Mask off surfaces not intended to be treated. Coating Stripper from unintended surfaces with a wet cloth to prevent potential damage to those surfaces. 3. Liberally apply an even coat of STONETECH Heavy Duty Sealer using a paint pad, roller, brush or low pressure sprayer. 4. Allow sealer to penetrate the surface for 10-15 minutes. During this time, OTHER keep the surface wet with sealer, adding more sealer as needed. DO NOT ALLOW SEALER TO COMPLETELY DRY ON THE SURFACE. 5. Thoroughly wipe dry the entire surface with clean absorbent towels.

LATICRETE International, Inc., One LATICRETE Park North, Bethany, CT 06524-3423 USA n 1.888.786.6343 n +1.203.393.0010 n www.stonetech.com ©2016 LATICRETE International, Inc. All trademarks shown are the intellectual properties of their respective owners. Maintenance & Care Instructions and Product Data Sheets are subject to change without notice. For latest revision, check our website at www.laticrete.com DS-211.4-1016 35 PORCELAIN, TERRA COTTA CONCRETE AND SANDSTONE AND OTHER CERAMIC AND AND CLAY SLATE TRAVERTINE LIMESTONE GRANITE MARBLE MASONRY FLAGSTONE QUARRY TILE PRODUCTS 36 Maintenance & Care Instructions andProductDataSheetsaresubjecttochangewithoutnotice. Forlatestrevision,checkourwebsiteatwww.laticrete.comMaintenance &CareInstructions ©2016 LATICRETE oftheirrespectiveowners. Inc.Alltrademarksshownaretheintellectual properties International, LATICRETE Inc.,OneLATICRETE International, Bethany, ParkNorth, CT06524-3423USA withacleandry dry 4. Followingpenetrationtime,completelywipesurface for15–30minutes;densermaterialmay 3. Allowsealertopenetratesurface 2. ApplySTONETECHEnhancerSealerevenlyandliberallyusingapaintpad, 1. Shakewellbeforeusing. pets outoftheareaduringapplicationanddrying. isdry.well-ventilated duringapplicationanduntilsurface Keepchildrenand and eyecontact.Wear protectiveeyewearandgloves.Ensureworkareais temperature shouldbebetween50°F–80°F(10°C-26°C).Avoid skin Surface sealers, waxesandcoatings.Notrecommendedforexteriorsurfaces. andfreeof isclean,thoroughlydry hours priortoapplication.Besuresurface and desiredresults.Allownewgroutinstallationstocureforatleast72 easeofapplication inconspicuous areawitha24-hourcuretimetodetermine Read entirelabelbeforeusing.Useonlyasdirected.Test inasmall STONETECH EnhancerSealer(Water-based) For acolorenhancingimpregnatingsealerforinteriorsurfaces: Refer todatasheetDS212.5formoreinformation. 8. Cleanuppromptlyafterjobiscomplete,sinceragsandequipmentthatare usemayresumein4-6 7. Fullcureisachievedin24–72hours.Surface 6. Ifsealerwasnotcompletelywipedoffandaresidueappears,wipeentire andshouldbe 5. Asecondcoatmaybeneededforporous,absorbentsurfaces clothtocompletely withacleandry theentiresurface 4. Thoroughlywipedry for5–15minutes;densermaterial 3. Allowsealertopenetratethesurface 2. LiberallyapplyanevencoatofSTONETECH notintendedtobetreated. 1. Maskoffanysurfaces use resumes. - 80°F(10°C26°C).Keepchildrenandpetsoutoftheareauntilsurface temperatureshouldbebetween50°F free ofwaxesandcoatings.Surface and isclean,thoroughlydry 72 hourspriortoapplication.Makesuresurface and desiredresults.Allownewgroutinstallationstocureforaminimumof easeofapplication inconspicuous areawitha24-hourcuretimetodetermine Read entirelabelbeforeusing.Useonlyasdirected.Alwaystestinasmall STONETECH For anaturallookwaterrepellentonexteriorsurfaces: Refer todatasheetDS279.0formoreinformation. 9. Cleantoolsusedduringapplicationwithwater. may 8. Afullcureisachievedin24-72hours.Useofthetreatedsurface 7. Shouldasealerresidueappear, rewettheimpactedsectionofsurface Ifasecond 6. Asecondcoatmaybeneededforporous,absorbentsurfaces. Natural Slate–MCI115 towel. DONOTALLOWEXCESSTODRY COMPLETELY ONSURFACE. entire areaforevenpenetration. Spreadexcesssealerover require maximumtimetopenetratesurface. sealer onunintendedsurfaces. low-pressure chemical-resistantsprayer, Avoid rollerorbrush. applying waste disposalregulations. of childrenandpets.Afterragsaredry, disposeofinaccordancewithlocal inawell-ventilatedareaoutofreach and allowequipmentragstodry wet withproductmaybecombustible.Cleanequipmentmineralspirits hours. loosen residueandfollowwithaclean,whiteabsorbenttoweltoremove. withatoweldampened withsealer.surface Useawhitenylonpadto applied onehourafterinitialapplicationasdirectedinsteps2–4. remove allexcesssealerfromthesurface. EXCESS SEALERTODRY ONTHESURFACE. excess sealeroverentireareatoensureevenpenetration.DONOTALLOW may requiremoretimeforsealertopenetrate.Duringthistime,distribute of application. sprayer. Donotusepowersprayer. Donotthinbeforeusing.Seemethod paintrollerorsolvent-resistant,low-pressure with apaintpad,paintbrush, withredrosinpapertoprotectituntilfullcureisachieved. treated surface mustresumesooner,resume in6-8hours.Ifuseofthesurface coverthe withaclean,absorbenttowel. residue andwipedry with sealer. padtoloosen withawhitenylonscrubbing Agitatethesurface application asdirectedinsteps3-5. coat isrequired,itshouldbeappliedwithin30-40minutesfromtheinitial ® HeavyDutyExteriorSealer ® HeavyDutyExteriorSealer continued 6. A full cure is achieved after 24–72 hours. Surface trafficmaybeginin6–8 6. Afullcureisachievedafter24–72hours.Surface orifadarker 5. Asecondcoatmaybeneededforporous,absorbentsurfaces 5. Keep surfaces clean and dry as finished surfaces may become slippery maybecomeslippery asfinishedsurfaces cleananddry 5. Keepsurfaces trafficmaybegin12hoursafterfinalapplication;keep installation 4. Surface isdry.3. Allow30-45minutesbetweencoatsoruntilthesurface 2. Liberallyapply1-3evencoatsofSTONETECHHighGlossFinishingSealer 1. SHAKEWELLBEFOREUSING.Donotdilutebeforeapplying. isdry.surface before applyingthesealer. Keepchildrenandpetsoutoftheareauntiltreated after grouting.Freshconcreteslabsrequireaminimumof28daystocure For newinstallationswithgrout,sealercanbeappliedassoon72hours Avoid notintendedfortreatment. wet ormoistsurface. applyingontosurfaces 26°C). STONETECH temperatureshouldbe50°F–80°F(10°C- in directsunlight,surface willaffectadhesionandappearance.Avoid ordustysurface applying to adirty clean, dry, andfreeofanysealersorcoatingsbeforeapplication.Application mustbethoroughly of desiredresults,andtoensuregoodadhesion.Surface appropriateapplicationmethod,achievement inconspicuous areatodetermine Read entirelabelbeforeusing.Useonlyasdirected.Alwaystestinasmall STONETECH HighGlossFinishingSealer For acolorenhancingtopicalprotector: Refer todatasheetDS218.5formoreinformation. 7. Cleanuppromptlyafterjobiscomplete.Ragsandequipmentthatarewet 6. Fullcureisachievedafter24-72hours.Avoid trafficfor6-8hours surface orifdarker 5. Asecondcoatmaybeneededformoreabsorbentsurfaces clothstoremoveallexcess withmultipledry 4. Thoroughlywipesurface for15-20minutes.Densermaterialmay 3. AllowSealertopenetratesurface 2. LiberallyapplyanevencoatofSTONETECHEnhancerPro™Sealerusing notintendedtobetreated. 1. Maskoffanysurfaces isdry.and petsoutoftheareauntiltreadedsurface isdry.well-ventilated duringapplicationanduntiltreatedsurface Keepchildren should bebetween50°F-80°F(10°C26°C).Ensurethattheareais temperature for24-72hours.Surface and previoussealers,isdry isclean,freeofwaxes,coatings, hours priortoapplication.Makesuresurface and desiredresults.Allownewgroutinstallationstocureforaminimumof72 easeofapplication inconspicuous areawitha24-hourcuretimetodetermine Read entirelabelbeforeusing.Useonlyasdirected.Alwaystestinasmall STONETECH EnhancerPro™Sealer(Solvent-based) exterior surfaces: For acolorenhancingimpregnatingsealerforinteriorand Refer todatasheetDS217.5formoreinformation. 7. Cleantoolsusedduringapplicationwithwater. until therecommendedtimeperiodshavepassed. hours. Ifneededsooner, coverthefloorwithredrosinpapertoprotectit application followingdirectionsinsteps1–4. ofinitial appearance isrequired.Applysecondcoat1hourafterstart when wet. foraminimumof12hours;fullcureisachievedin24-48hours. dry pump-up gardensprayer. Avoid puddlingofproductduringapplication. paintroller,with anaturalbristlepaintbrush, lowpressuresprayer, or with localwastedisposalregulations. area outofreachchildrenandpets.Whendry, disposeofinaccordance inawell-ventilated inawell-ventilatedarea.Allowragstodry allow todry with productmaybeflammable.Cleanequipmentmineralspiritsand paper isnotneededtoapplysecondcoat. red rosinpapertoprotectituntilfullcurehasbeenachieved.Red trafficmustresumesooner,after application.Ifsurface coverthefloorwith initial application,asdirectedinsteps2-4. of appearance isrequired.Sealershouldbeappliedonehourafterstart sealer. residue thatmayneedtobemechanicallyremoved. ON SURFACE. mayresultin Failuretoremoveexcesssealerfromsurface require moretimetopenetrate.DONOTALLOWEXCESSSEALERTODRY sprayer, towel,orspongeforapplication.Donotthinbeforeusing. a paintpad,roller, orpump-upgardensprayer. brush, Donotuseapower n 1.888.786.6343 ® HighGlossFinishingSealershouldnotbeappliedtoa n +1.203.393.0010

n www.stonetech.com Refer todatasheetDS220.5formoreinformation. 6. Cleantoolsusedduringapplicationimmediatelywithwater. maybecomeslippery asfinishedsurfaces cleananddry 5. Keepsurfaces trafficmaybegin12hoursafterfinalapplication;keepinstallation 4. Surface isdry.3. Allow30-45minutesbetweencoatsoruntilthesurface 2. Liberallyapply1-3evencoatsofSTONETECHSemiGlossFinishingSealer 1. SHAKEWELLBEFOREUSING.Donotdilutebeforeapplying. isdry.surface before applyingthesealer. Keepchildrenandpetsoutoftheareauntiltreated after grouting.Freshconcreteslabsrequireaminimumof28daystocure For newinstallationswithgrout,sealercanbeappliedassoon72hours Avoid notintendedfortreatment. wet ormoistsurface. applyingontosurfaces 26°C). STONETECHSemiGlossFinishingSealershouldnotbeappliedtoa temperatureshouldbe50°F–80°F(10°C- in directsunlight,surface willaffectadhesionandappearance. Avoid ordustysurface applying to adirty clean, dry, andfreeofanysealersorcoatingsbeforeapplication.Application mustbethoroughly of desiredresults,andtoensuregoodadhesion.Surface appropriateapplicationmethod,achievement inconspicuous areatodetermine Read entirelabelbeforeusing.Useonlyasdirected.Alwaystestinasmall STONETECH SemiGlossFinishingSealer Refer todatasheetDS219.5formoreinformation. 6. Cleantoolsusedduringapplicationimmediatelywithwater. when wet. foraminimumof12hours;fullcureisachievedin24-48hours. dry product withasprayer. Avoid puddlingofproductduringapplication. paintroller,with anaturalbristlepaintbrush, orpaintpad.Donotapply DS-211.4-1016