DOCSLIB.ORG

ATLAS Porcelain

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ATLAS Porcelain ATLAS Porcelain www.architecturalceramics.com ATLAS COLORS Granite Stone Slate Multicolor Slate Grey Slate Black Slate White www.architecturalceramics.com ATLAS GRANITE STONE 24x48 18x36 24x24 - 20mm 12x48 12x24 MOSAICS 12x48 Parallelo Mosaic 12x24 Modulo Mosaic 12x24 Listelli 1x1 Mosaic 12x12 3D Mosaic www.architecturalceramics.com ATLAS SLATE MULTICOLOR 24x48 18x36 24x24 - 20mm 6x48 12x24 MOSAICS 12x48 Parallelo Mosaic 12x24 Modulo Mosaic 12x24 Listelli 1x1 Mosaic 12x12 3D Mosaic www.architecturalceramics.com ATLAS SLATE GREY 24x48 18x36 12x24 12x48 24x24 24x24 - 20mm MOSAICS 12x48 Parallelo Mosaic 12x24 Modulo Mosaic 12x24 Listelli 1x1 Mosaic 12x12 3D Mosaic www.architecturalceramics.com ATLAS SLATE BLACK 24x48 18x36 12x24 12x48 24x24 - 20mm 24x24 MOSAICS 12x48 Parallelo Mosaic 12x24 Modulo Mosaic 12x24 Listelli 1x1 Mosaic 12x12 3D Mosaic www.architecturalceramics.com ATLAS SLATE WHITE 24x48 18x36 12x24 12x48 24x24 24x24 - 20mm MOSAICS 12x24 Listelli 1x1 Mosaic www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS www.architecturalceramics.com ATLAS AVAILABLE SIZES FIELD MOSAICS DECO 24x48 18x36 12x48 6x48 24x24 24x24 12x24 4x12 35x35 48x109 1x1 12x12 12x24 12x24 12x24 20 mm 3D Listelli Modulo Paralello Granite Stone N, L N, L N N N, L N N N N N Slate Multicolor N N N N N, L N N N N N Slate Grey N N N N N N, L N N N N N N N N Slate Black N N N N N N, L N N N N N N N N Slate White N N N N N, L N N N N N TRIM AVAILABLE TRIM 6x12 1x6 3x24 3x36 CB CB In/Out BN BN Granite Stone N N N N Slate Multicolor N N N N Slate Grey N N N N Slate Black N N N N Slate White N N N N L=Lappato Finish, N=Natural Finish Italicized items are special order from Italy with extended lead times. Please consult an ACI sales rep for sample & product availability. Additional Trim may be available special order. Please contact your sales representative. Lead times for specialty & non-stocked items varies depending on product ordered, quantity, and destination. Please contact ACI to determine the lead time to order samples and material. DESCRIPTION Atlas offers its own unique interpretation of the slates of the world based on a fresh vision and new reproduction technologies. INSTALLATION & MAINTENANCE Atlas may be installed using standard ceramic tile installation methods and materials, as recommended by the Tile Council of North America (TCNA). An Architectural Ceramics sales representative will advise you on general installation questions. The manufacturer of this product recommends a 2mm grout joint. TECHNICAL INFORMATION ORIGIN: ITALY COLOR VARIATION: V3 MODERATE VARIATION AVAILABLE FINISHES: LAPPATO, NATURAL THICKNESS: 6.5MM(47X109), 10 MM (20MM AVAILABLE IN TYPE: PORCELAIN 24X24) EDGE: RECTIFIED (SELECT 20 MM COLORS AVAILABLE PORCELAIN ENAMEL INSTITUTE SCALE: N/A SPECIAL ORDER IN NON-RECTIFIED) DYNAMIC COEFFICIENT OF FRICTION: ≥ .42 LOOK: SLATE BREAKING STRENGTH: COMPLIANT TO ASTM C-648 APPLICATION: WALL & FLOOR >250 LBS USE: COMMERCIAL & RESIDENTIAL WATER ABSORPTION: < 0.5% PACKAGING: PLEASE CONSULT YOUR ACI SALES REP STAIN RESISTANCE: YES FOR PACKAGING INFORMATION FROST RESISTANCE: YES WEBSITE www.architecturalceramics.com/catalogs PLEASE NOTE THIS LINK IS CASE SENSITIVE CONTACT INFORMATION: www.architecturalceramics.com 1.800.287.1742 For general sales inquiries: [email protected] For commercial & hospitality sample requests: [email protected] Headquarters: 800 E Gude Dr Suitewww.architecturalceramics.com F Rockville, MD 20850 V08.24.20.
Load more

Recommended publications
  • Bedrock Geology Glossary from the Roadside Geology of Minnesota, Richard W
    Minnesota Bedrock Geology Glossary From the Roadside Geology of Minnesota, Richard W. Ojakangas Sedimentary Rock Types in Minnesota Rocks that formed from the consolidation of loose sediment Conglomerate: A coarse-grained sedimentary rock composed of pebbles, cobbles, or boul- ders set in a fine-grained matrix of silt and sand. Dolostone: A sedimentary rock composed of the mineral dolomite, a calcium magnesium car- bonate. Graywacke: A sedimentary rock made primarily of mud and sand, often deposited by turbidi- ty currents. Iron-formation: A thinly bedded sedimentary rock containing more than 15 percent iron. Limestone: A sedimentary rock composed of calcium carbonate. Mudstone: A sedimentary rock composed of mud. Sandstone: A sedimentary rock made primarily of sand. Shale: A deposit of clay, silt, or mud solidified into more or less a solid rock. Siltstone: A sedimentary rock made primarily of sand. Igneous and Volcanic Rock Types in Minnesota Rocks that solidified from cooling of molten magma Basalt: A black or dark grey volcanic rock that consists mainly of microscopic crystals of pla- gioclase feldspar, pyroxene, and perhaps olivine. Diorite: A plutonic igneous rock intermediate in composition between granite and gabbro. Gabbro: A dark igneous rock consisting mainly of plagioclase and pyroxene in crystals large enough to see with a simple magnifier. Gabbro has the same composition as basalt but contains much larger mineral grains because it cooled at depth over a longer period of time. Granite: An igneous rock composed mostly of orthoclase feldspar and quartz in grains large enough to see without using a magnifier. Most granites also contain mica and amphibole Rhyolite: A felsic (light-colored) volcanic rock, the extrusive equivalent of granite.
    [Show full text]
  • Final-Portafolio-2017.Pdf
    ó Pacific Curbing is the leading company for Pinellas & Hillsborough area decorative concrete landscape curbing. Our decorative, stamped curbing is on the cutting edge of landscape design. 11/11/2016 2 ó Concrete curbing is a professionally installed, permanent, attractive concrete border edging that provides great additions and solutions to any landscape and serves as a weed and grass barrier by outlining flowerbeds. Pacific Curbing decorative concrete curbing can be installed around trees, flowerbeds, sidewalks and just about anywhere you like. 11/11/2016 3 ó Concrete curbing can enhance your landscape, it is the half of price of bricks and is a permanent solution, increase curb appeal, decrease the time spent trimming around landscape beds and increase your property value. 11/11/2016 4 ó Rollers are a soft textures impresions on the concrete curbing for the angle mold 6x4. ó You can choose a natural looking like stone or you can choose something symetrical. ó Price per foot $5.75 ó You can choose any color up 3lb ó Project is seal with the UV Sealer. ó PSI 3600 Ashlar Basketweave Brick Bone Cobblestone Flagstone H Brick Herringbone Offset bond Old stone Pebblestone Random Riverstone Running bond L Running bond Slate Spanish Texture Treebark Wood RAMDOM ROLLER RUNNING BOND ROLLER SLATE ROLLER FLAGSTONE ROLLER SPANISH TEXTURE SINGLE BRICK ó Stamps are deep impresions on the concrete curbing for the angle mold 6x4. ó They come on a symetrical designs. ó Price per foot $6 ó You can choose any color up 3lb ó Project is seal with the UV Sealer.
    [Show full text]
  • Fact Sheet 5 Principles of Stone Extraction
    QuarryScapes guide to ancient stone quarries Fact Sheet 5 Fact Sheet 5 Principles of stone extraction In all stone quarry situations the extraction phase rich) ones. Partly because they in general display is based on one or combinations of three the most brittle behaviour, but also because it is a fundamental principles: well documented fact (and experience among quarrymen) that siliceous rocks (granite in 1. Levering; expanding open fractures by particular) have well defined preferred splitting inserting levers, crowbars or stones 2. Splitting; creating fractures, preferable directions defined by microfractures in quartz. planar, by strokes (i.e. sledge hammer), Splitting by heating is caused by a combination of wedging; heating or blasting with thermal expansion properties and brittle explosives behaviour. It works best on quartz-rich rocks due 3. Channelling (carving); making channels in to the well known but poorly understood change the rock by carving with hammer and of mechanical properties of quartz when heated. chisel, pickaxe or stone tools, heating with fire, sawing or drilling Channelling is the third fundamental principle. Channels in the rock are made by removing the Levering may be described as the “simplest” way rock mass by chiselling, picking, sawing or of extraction, involving the expansion of natural heating. In most soft stone quarries from the cracks or other planes of weakness (such as Bronze Age onwards, channelling is the most bedding planes) using various tools. important extraction method. In most cases, channelling is combined with other methods. For Splitting may be defined as the act of generating instance, channels are made perpendicular to the new fractures for extracting rock.
    [Show full text]
  • Inspire-Brochure-0220-Wac.Pdf
    The Merits of Luxury Luxury is defined as a state of great comfort and elegance. The advantages of true luxury products increase over time. The more time you spend using them, the more you appreciate them. It comes at a price because it delivers both value and pleasure. Something of true quality will validate your choice every day that you enjoy it and every time that you look at it. It will bring you peace of mind as well as the pleasure of enjoying its enduring style and performance. Born of technology, Inspire® perfectly imitates noble materials while providing the distinct advantages of advanced manufacturing processes and product design without compromising aesthetics and performance. Unsurpassed Beauty and Superior Performance are the quintessential qualities that define Luxury, and precisely why discerning homeowners choose Inspire® Roofing Products for their homes. Choose nothing less than the best for your home. CLASSIC SLATE | CHARCOAL BLACK 2 3 CLASSIC SLATE | CUSTOM MIX «Luxury is not a necessity to me, but beautiful and good things are.» - Anais Nin Classic Color Mix slate program Elegance, Tradition, Inspire® by Boral Color Mix program allows Performance. you to choose up to five colors for a Classic Slate mix to create a roofing color palette that Inspire® Classic Slates’ textured surfaces and is uniquely yours. With Inspire® mixes, there is deckled edges are modeled from authentic never any need to shuffle tiles from multiple natural slates, imparting a controlled uniformity bundles prior to installation. Each bundle from that epitomizes natural slate roofing. Classic Slate Inspire Roofing Products comes factory-sorted delivers the appearance of a natural slate roof and ready for application.
    [Show full text]
  • COMPARISON of GRANITE and PRECAST CONCRETE CURBING Cost and Technical Issues
    COMPARISON OF GRANITE AND PRECAST CONCRETE CURBING Cost and Technical Issues MICHAEL SOCK April 1999 Prepared for the Rhode Island Department of Transportation by the Research and Technology Development Section RHODE ISLAND DEPARTME NT OF TRANSPORTATION William D. Ankner , Ph. D., Director James R. Capaldi, P .E., Chief Engineer Colin A. Franco, P.E., Ma naging Engineer, R&TD Executive Summary This study was undertaken to determine the technical and economic feasibility of using granite curbing as an option within the normal practices of highway construction in Rhode Island. Previous studies have been carried out by various entities, including the RIDOT design section. These were reviewed and referenced where appropriate. For this endeavor, the R&TD Section began with a literature search and surveys of states and vendors in their usage of highway curbing. A trip to the Fletcher Granite Quarries in Chelmsford was also undertaken to get a first hand look at the curbing operation and logistics involved in the supply of curbing. Through an interview with Mr. Robert Fruggiero, retired RIDOT Materials Engineer, we learned details about the inception of zero slump concrete curbing. As the technical aspects of granite vs. concrete curbing had been studied and reported on previously, we decided just to overview these and focus our effort on the economics of initial and life cycle costs instead. Needed information was difficult to obtain. However, we did get the same from various sources, such as states, vendors, contractors, and RIDOT records. The life cycle costing was done using conventional formulae, but with three different interest rates.
    [Show full text]
  • Cemetery Preservation QUICK TIPS
    Georgia’s State Historic Preservation Office IIIIIICCCeeemmmeeettteeerrryyy PPPrrreeessseeerrrvvvaaatttiiiooonnn QQQUUUIIICCCKKK TTTIIIPPPSSSIIIIII Common Monument and Gravemarker Materials Below are brief descriptions of the most common stones and monument material types found in Georgia. Stones vary in hardness and therefore in their ability to survive satisfactorily outdoors in cemeteries, as well as their ability to withstand cleaning or restoration. The Mohs Scale of Mineral Hardness, created in 1812, establishes talc as the softest mineral material and diamond as the hardest. There is no need to determine the exact hardness of a stone you are working on. However, seeing how some common cemetery materials rank on the Mohs Scale can guide your choice of the best methods for working with them: Talc (see "soapstone" below) Marble Sandstone Granite Diamond 1 3-4 5 7-8 10 If identifying the type of stone is difficult, but will be important to a cemetery preservation project, referring to a stone/mineral field guide is recommended, or consulting with a geologist or other expert. Marker Material Descriptions MARBLE Marble has been used for a great many markers in historic cemeteries in Georgia. The state's marble industry dates back to the late 1830s, when outcroppings of surface marble were discovered in north Georgia. Quarrying began, and markers were carved and sold throughout the area. The Georgia marble industry still thrives today. Several different types of stone that can be polished are called marble. A true marble, though, is a metamorphic rock made up of calcium carbonate, traces of silica and iron oxides; it is rather soft and easily carved.
    [Show full text]
  • Granite Telecommunications, LLC
    2014 Granite Telecommunications, LLC Samuel J. Kline, SVP, Strategic Planning Michael B. Galvin, General Counsel Bobbi-Sue Doyle-Hazard, Assoc. Corp. Counsel Granite Telecommunications,, LLC January 2014 CONTENTS Granite Background 1.1 Facts...…………………………………………………………………………….......2 1.2 Recognition…..………………………………………..………………………..…….3 1.3 Background…………………………………………………………..……………….4 National Product Support 2.1 North American Voice Management……………………………………………..…6 2.2 Structured Cabling and Systems……………………………………………………7 2.3 Broadband Solutions…………………………………………………………………7 2.4 High Capacity Data Services………………………………………………………..8 2.5 Data Aggregation Unit (DAU)………………………………………….…………....8 Impact of Trials on Granite Customers 3.1 Customer Description..……………………………………………….………….….9 3.2 Risks to Granite Customers From Regulatory Proposal……………………….10 3.3 Ground Rules for Trials……..……………………………………………….…….11 Page 1 of 11 GRANITE BACKGROUND 1.1 Who is Granite? ¾ Communications management company for businesses o Serves more than 13,500 multi-site businesses nationwide at over 240,000 locations o No residential services ¾ For over a decade, Granite has experienced explosive growth; 2013 annual revenue exceeded $865 million and project to exceed $1 billion in 2014 ¾ Granite manages more than 1,300,000 business phone lines (POTS), 68,000 Broadband lines, and 10,000 T-1s ¾ Granite is a private company with headquarters in Boston, MA and offices throughout America Purchased corporate-owned campus, exceeds 300,000 square feet of office space ¾ Over 1,100 employees and nationwide network of over 8,000 wire and cabling contractors ¾ Granite’s tremendous growth is matched by its client retention; both are industry leading ¾ Industry leading web tools with unique reporting that is customizable to customer’s needs Page 2 of 11 1.2 Recognition Ernst and Young Entrepreneur of the Year (2010) BBJ Top 20 Charitable Contributor of the Year in Massachusetts (2009, 2010, 2011, 2012) Inc.
    [Show full text]
  • Genuine Marble and Granite. the Natural Choice
    Genuine Marble and Granite. The Natural Choice. Genuine granite and marble are the natural choice for individuals who desire something really unique in countertops, vanity tops, showers, floors and other elements of the home. When you choose natural stone, you are assured that no other home in the world will have stone that is an exact duplicate. Don’t settle for anything less. Natural stone is durable, beautiful, easy to maintain, and will last a lifetime. Whether you are building a new home or remodeling an older one, natural stone is… The Natural Choice! M S International, Inc. Premium Natural Stones TM www.msistone.com Genuine Marble & Granite • Classic Beauty! What Makes Natural Marble and Granite Different? In a word, time. It takes millions, if not billions of years for Mother Nature to create natural stone. There are many factors that affect the ultimate graining and coloration of natural stone. They include underground springs, mineral deposits, earth shifts, temperature, natural solutions in the earth, and the pressure exerted on these elements over time. There is no way to duplicate these factors in a laboratory or manufacturing environment. Because of the vast differences in the conditions that created the stone, every block extracted from the earth is different. The hand of man has played no role in the process. Even after the stone has been removed from the quarry, there is little human intervention, except for cutting and polishing (which brings out all the uniqueness and natural beauty); nothing is done to alter the natural state of the stone. That’s why the number of different colors and patterns of natural stone is limitless.
    [Show full text]
  • Natural Stone Slate Tile Installation Manual Setting
    Natural Stone Slate Tile Installation Manual The following procedure for the installation of Natural Stone Slate Tile (Gauged Back) for Flooring It may be used over any wood and cement floor that is structurally sound and dry. In new home construction where plywood is used as a sub floor, it is suggested that an underlayment or backer board needs to attached to the sub floor to insure rigidity where slate floors will be installed. Setting 1. Clean area where slate is to be installed. In the case of smooth painted or varnished floors, it is necessary to sand with very coarse sand paper to assure a good mastic bond. 2. Lay out the slate to understand pattern choices. For multi color slates, blend tile randomly to give proper blend of colors as slate color vary from tile to tile. 3. Using a notched 1/4" x 1/4" trowel, hold at a 45 degree angle to be sure a full ridge is made with the notches. Spread thinset on floor starting ar a far corner so you can back out of the room as you proceed. Spread just enough area so you can reach over it to place the slate. Natural cleft slates have a thickness variation. Spread a good amount of thinset on the floor to make up for any thickness variation. Adding or taking away thinset will ensure that all the tiles are evenly set. 4. Maintain a grout space between the pieces as recommended by the slate supplier (1/4" or 3/8") depending on the sizes of the tiles.
    [Show full text]
  • Field Stone Quarrying
    Field Stone Quarrying The depression in front of you contains the remains of a field stone quarrying site. The early settlers of this area typically used existing field stones to build rock walls, dry laid foundations for buildings, and small mill dams. When the rocks were too large to move, or for their intended use, they were split using hand tools. The usual splitting process used a series of wedges along the intended crack direction. The wedges were typically fashioned of steel by a blacksmith who then hardened them through quenching and tempering. Steel was expensive at the time but the typical wrought iron that a blacksmith used was much too soft to serve as a rock splitting wedge. The wedges were of two types, those to be used in rectangular holes and those for round holes. Rectangular holes were made in the rock using a cape chisel and cylindrical holes made with a plug or a star drill. The cape chisel was pounded with a hammer to create a rectangular hole. The plug drill (2 cutting edges) or star drill (4 cutting edges) were rotated slightly between each hammer blow to break up a new surface at the bottom of the hole. During the process, the drill was pulled out and the hole was cleared of rock Top to bottom: Cape chisel, plug drill, star drill. dust, typically by blowing through a small tube inserted in the hole. In the case of the round hole, the wedge was inserted between two semi-cylindrical tapered inverted wedges (“feathers”) in a hole drilled by hand in the rock.
    [Show full text]
  • Dimension Stone Feasibility Study
    DIMENSION STONE FEASIBILITY STUDY: DEVELOPMENT POTENTIAL IN MICHIGAN'S UPPER PENINSULA H. James Bourque and Associates 402 Ashmun Street, P.O. Box 292 Sault Ste. Marie, MI 49783 (906) 635-9191 July 1, 1999 Page 2 Table of Contents Acknowledgements ................................................................................................... 4 Project Background.................................................................................................... 5 In Recent Years . ...................................................................................................... 5 Study Methods............................................................................................................ 7 Geology of the Upper Peninsula................................................................................. 7 Dimension Stone Production ...................................................................................... 8 1997 Dimension Stone Production By Types: ...........................................................9 Dimension Stone Pricing ...........................................................................................11 Sandstone ..............................................................................................................12 Granite...................................................................................................................12 Limestone ..............................................................................................................12 Stone Sites Investigated
    [Show full text]
  • BUIL])ING STON.E O·F WASHINGTON
    BUIL])ING STON.E o·f WASHINGTON By WAYNE S. MOEN Washington Department of Conservation Division of Mines and Geology Bulletin No. 55 1967 State of Washington DANIEL J. EV ANS, Governor Department of Conservation H. MAURICE AHLQUIST, Director DIVISION OF MINES AND GEOLOGY MARSHALL T. HUNTTING, Supervisor Bulletin No. 55 BUILDING STONE OF WASHINGTON By WAYNE S. MOEN STATE PRINTING PLANT. OLYMPI A , WASHINGTON 1967 For sale by Department Pof? ceConsl]SliARYervation, Olympia, Washington. PACIFIC NORTHWEST FOREST AND RANGE EXPERIMENT STATION etnDTLAND. OR£00N CONTENTS Poge Introduction 7 General history .. ...... ...........................•............ 8 Production and vo lue . 10 Forms of building stone . 12 Field stone . 12 Rough building stone . 13 Rubble . • . 14 Flogging (flagstone) . 14 Ashlar . .. ......... ........ , ................. , . , . 15 Crushed stone . 16 Terrozzo . 17 Roofing granules.............. .... ..... ......... 18 Exposed aggregate . 18 Reconstituted stone . • . 19 Landscape rock . 20 Area coverage of bui Iding stone . 21 Acquisition of bui )ding stone . 22 Examination of stone deposits . 23 General quarrying methods . 24 Physical properties of building stone . 26 Strength . 26 Hardness and workabi Iity . • . 27 Color . 28 Alteration ....•...................... , ........... , . 29 Porosity and absorption ...........•. : . 31 Testing of building stone... .. .................... ................ 33 Common building stones of Washington . 34 Granite . 35 Geology and distribution . 35 Physical properties . 38 Varieties
    [Show full text]