HIGH PERFORMANCE 3D PRINTING FILAMENTS 3D Premium Printing Filament

About us

Nexeo Solutions 3D is a specialized Building on the experience in the 3D group within Nexeo Solutions that printing market, Nexeo Solutions focuses primarily on premium 3D 3D comes from the distribution of printing filaments for fused filament plastics and chemicals. The deep fabrication (FFF) technology that knowledge on base materials as demonstrate unique material well as the access to world leading performance in relation to the thermoplastic producers enables market’s current offerings. our team to provide the professional assessment to help our customers to make the right material choice.

Application Development Engineers (ADE)

Our ADE team can help you to Our Services: incorporate 3D printing technology as • Providing a wide range of filaments part of your series production, providing using materials from leading support from the design optimization producers’ to the final production part. • Guiding customers on material choice, based on application requirements • Assisting with design optimization • Printing recommendations • Samples delivery

Industries

Our aim is to serve a broad cross- section of industries, including automotive, healthcare, electrical/ electronics, packaging or sports and leisure and also high demanding professional consumers looking for improved properties of their 3D printed objects. Novamid® ID1030 Arnitel® ID2045 Novamid® ID1070 Arnite® ID3040 Nylon - PA666 Elastomer - TPC Nylon - PA6 Polyester - PET · Ideal balance performance-printability · Low temperature build plate · Strong and tough · Chemical resistance · Operational temperature up to 125°C · Operational temperature up to 125°C · Operational temperature up to 150°C · Operational temperature up to 150°C · Max tensile stress 37 Mpa · Shore D34 · Max tensile stress 50 Mpa · Max tensile stress 47 Mpa · Translucent · 390% elongation at break · Harsh environments · Stifness · For material-opened 3D printers · For material-opened 3D printers · For material-opened 3D printers · For material-opened 3D printers Novamid® ID1030 is our unique Arnitel® ID2045 is a highly flexible Novamid® ID1070 is our unique Arnite® ID3040 is a high quality PET premium polyamide meeting the TPC (thermoplastic copolyester) premium polyamide meeting the (polyethylene terephthalate) used high-service levels requirements in used in electronics, sports and a high-service levels requirements in in high-precision parts in unlimited industries such as automotive and wide range of other applications. It is industries such as automotive and variety of applications, which meets electronics. Novamid ID is a very a flexible polymer with very good UV- electronics. Novamid ID is a very the highest standards expected in ductile, strong polymer suitable and chemical-resistance compared ductile, strong polymer suitable industries such as automotive and for harsh environments and high to other flexible polymers such for harsh environments and high consumer products. The material is temperatures, up to 125°C, offering as TPU (thermoplastic urethane), temperatures, up to 150°C, offering currently used in safety-critical parts excellent layer-to-layer adhesion and reaching elongation at break of up excellent layer-to-layer adhesion, in the automotive industry. fast printing processability. to 390%. strength and toughness. Potential applications: Potential applications: Potential applications: Potential applications: Fluid valve, LED shell Air Duct, Automotive tooling, Clamp Crank, Drone Shoe last, Windows frames, Watchband, Shoe sole Electronic pin connectors

Eastman Amphora™ AM3300 Eastman Amphora™ HT5300 Ingeo General Purpose PLA Ingeo™ 3D870 Copolyester – PETG Copolyester – PETG HH PLA PLA · Translucent · Translucent · Easy printing · Improved impact strength · Operational temperature up to 85°C · Operational temperature up to 100°C · Operational temperature up to 60°C · Operational temperature up to 60°C · Easy printing · Superior durability · Dimensional stability · Dimensional stability · Low-odor and styrene free · Low-odor and styrene free · Low carbon footprint · Low carbon footprint · For material-opened 3D printers · For material-opened 3D printers · For material-opened 3D printers · For material-opened 3D printers

Eastman Amphora™ AM3300 Eastman Amphora™ HT5300 Ingeo General Purpose PLA is a Ingeo™ 3D870 is a grade specifically 3D polymer is a transparent, low- 3D polymer is a transparent low- thermoplastic resin derived from developed for manufacturing 3D odor and styrene-free material odor, BPA and styrene-free material naturally advanced materials printer monofilament. Engineered which enables printing within a wide exhibiting superior durability, made from locally abundant and to deliver improved heat-resistance range of processing temperatures. dimensional stability and toughness. sustainable annually renewable and high impact strength, this Amphora AM3300 has good flow It is ideal for applications that require resources. Ingeo General Purpose formulated low-odor grade achieves properties and exhibits advanced temperature resistance of up to PLA is a high molecular weight thermal and mechanical properties overhang ability, low warping, 100°C. Due to its superior dimensional biopolymer grade that processes similar to ABS while offering an excellent looks, and a large stability, HT5300 enables 3D printing easily on FFF printers. Ingeo General alternative to styrenic-based materials. operational temperature range up to to precise dimensions, which is Purpose PLA offers an excellent cost Ingeo™ 3D870 provide excellent 85 °C. This highly efficient polymer especially important for products with ratio for concept validation. characteristics such as precise can help speed up processing times. tight tolerances and multi-component detail, good build plate adhesion parts. Enabled by Eastman Tritan™ and therefore less warping. High copolyester technology. compatibility with added value semi- crystalline polyesters. Potential applications: Thermostat Potential applications: Potential applications: Potential applications: dial, Architectural model, Medical Lighting cover Prototype Prototype, Support material simulation and education models

CYCOLAC™ AMMG94F LEXAN™ AM1110F LEXAN™ EXL AMHI240F ULTEM™ AM9085F ABS PC PC PEI · Ideal balance chemical- · High stifness and toughness · High impact strength · Mechanical strength and stifness temperature-impact resistance · Flame resistance · Flame, smoke and toxicity resistance · Long-term heat resistance · Good low temperatures performance · High temperature resistance · High temperature resistance · Flame, smoke and toxicity resistance · Toughness · For material-locked 3D printers · For material-locked 3D printers · For material-locked 3D printers · For material-locked 3D printers

CYCOLAC™ AMMG94F filament is a LEXAN™ AM1110F filament is a LEXAN™ EXL AMHI240F is a high ULTEM™ AM9085F filament is a general purpose ABS based material general purpose polycarbonate performance polycarbonate filament high performance polyetherimide manufactured from CYCOLAC™ produc t manufactured from LEXAN™ that provides high impact blend product manufactured from MG94 resin. It provides a balance of HF1110 resin. It provides thermal strength at room temperature ULTEM™ 9085 resin. It provides high properties suitable for a wide variety proper ties above that of general and extreme low temperatures. heat resistance and mechanical of applications and it is UL94 HB purpose ABS filaments and it is UL94 LEXAN™ EXL AMHI240F combine strength, it is UL94 V-0 compliant compliant at 3.0 mm. V-2 compliant at 3.0 mm. the high impact with improved UL94 at 1.5 and 3.0 mm and meets FAR V-0 performance over standard 25.853 and OSU 65/65 with low polycarbonate. toxicity, smoke, and flame evolution. Potential applications: Potential applications: Potential applications: Potential applications: Appliances, Automotive trims Electronic components, lighting Drone, Hockey face mask Aerospace Tooling 3D Premium Printing Filament

What is your application end use?

AESTHETIC VALIDATION

Strength level required

LOW HIGH STANDARD

Polishing needs?

NO YES

INGEO GENERAL PURPOSE INGEO™ 3D870 AMPHORA™ AM3300 AMPHORA™ HT5300 PLA PLA Copolyester – PETG Copolyester – PETG HH INGEO™ 3D870 CYCOLAC™ AMMG94F ARNITE® ID3040 PLA ABS Polyester - PET AMPHORA™ AM3300 ARNITEL® ID2045 Copolyester – PETG Elastomer - TPC NOVAMID® ID1030 Nylon - PA666 NOVAMID® ID1070 Nylon - PA6 CYCOLAC™ AMMG94F ABS LEXAN™ AM1110F PC LEXAN™ EXL AMHI240F PC ULTEM™ AM9085F PEI 3D Premium Printing Filament

What is your application end use?

FUNCTIONAL PART

Technical Performance level required

HIGH

What is the operational temperature required?

Up to 125 ºC From 125 ºC to 140 ºC

Does your application need flexibility? What is more relevant for your application?

NO YES High impact Stiffness

AMPHORA™ HT5300 NOVAMID® ID1030 ARNITEL ® ID2045 NOVAMID® ID1070 ARNITE ® ID3040 Copolyester – PETG HH Nylon - PA666 Elastomer - TPC Nylon - PA6 Polyester - PET ARNITE® ID3040 LEXAN™ AM1110F ULTEM™ AM9085F Polyester - PET PC PEI ARNITEL® ID2045 LEXAN™ EXL AMHI240F Elastomer - TPC PC NOVAMID® ID1030 Nylon - PA666 NOVAMID® ID1070 Nylon - PA6 CYCOLAC™ AMMG94F ABS LEXAN™ AM1110F PC LEXAN™ EXL AMHI240F PC ULTEM™ AM9085F PEI THINK PRINT USE

Nexeo Solutions 3D - EMEA France +33 1 41 19 29 27 Lluís Muntadas, 5 Germany +49 (0) 711880264 33 08940 Cornellà de Llobregat - Barcelona Ireland +44 1773 524303 Tel: +34 93 480 91 25 Italy +39 0225547092 Fax: +34 93 473 42 50 Netherlands +34 934 80 91 31 www.nexeo3D.com Poland +48 228680210 [email protected] Portugal +351 244 819 990 Russia +7 812 7777 957108 Nexeo Solutions 3D - US Spain +34 934 80 91 31 Nexeo Solutions, LLC Sweden +46 (0303) 729512 3 Waterway Square Pl #1000 UK +44 1773 524303 The Woodlands, TX 77380, USA US +1.844.396.3693 www.nexeo3D.com [email protected]

All statements, information and data presented herein by Nexeo Solutions are believed to be accurate but are not to be taken as a guarantee or other representation for which Nexeo Solutions and its affiliates and subsidiaries assume legal responsibility. NEXEO SOLUTIONS EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARISING OUT OF ANY USE OF THE PRODUCTS OR SERVICES IDENTIFIED HEREIN OR RELIANCE ON ANY INFORMATION PROVIDED HEREIN. All statements, information, recommendations and products must be thoroughly evaluated and verified by the end user to determine their applicability or suitability for each particular use. Typical values are indicative only and are not be construed as being binding specifications. © 2017 Nexeo Solutions. All Rights Reserved, Nexeo Solutions, LLC.