Bessey Tools North America Tool Catalog

Home , Clamp (tool), Pipe clamp, Torque multiplier

www.besseytools.com The K Body® Parallel Clamp 1 1. Poly-clad steel jaws - durable, non-marring,glue-resistant 2. Over sized, Acme thread - positive grip with minimum turns 3. Large wood handle - comfort grip; hand tightens to 1,000 lbs. clamping pressure 4. Large, parallel jaws - always at a 90° 2 4 angle to the rail; even pressure across the entire surface; no bowing, turning or lifting of work 5. Unique jaw-locking system - dual locking set screws permanently molded into the sliding arm; interlock with serration on both sides of the rail for 5 non-slip grip 6. Cold drawn, profiled steel rail - made in Bessey's own mill for quality control; engineered to minimize flexing or bending, galvanized to prevent rust and marks on wood 3

Nobody but Bessey has ever designed and built a clamp that works like a K Body Clamp ... Bessey UniKlamp NOBODY. The Bessey K Body is the original parallel clamp, designed for woodworkers This is the "small cousin" of the K Body built who depend on accurate clamping every on a lighter frame. Although it does not have time they use it. Look closely at the workings the precision componentry for the accuracy of a K Body ...hardened- and precision of the K Body, it is nonetheless steel, locking set screws, a great little universal clamp/spreader for steel guide rollers and steel benchtop projects. Exerts even pressure over anchor pins. There are also 11 sq. in. of non-marring jaw surface. precision internal elements that are not visible. Without any of them, the K Body Now a spreader too! would simply not stay parallel. NO other clamp on the market uses this system to ensure parallelism.

CATALOG NOMINAL NOMINAL NOMINAL NOMINAL NUMBER THROAT OPENING RAIL SIZE PRESSURE

1 1 3 K3.512 3 /2" 12" 1 /8" X /8 " 1000 LBS

K Body Clamps are now fitted with a swivel 1 1 3 K3.524 3 /2" 24" 1 /8" X /8 " 1000 LBS foot pad that serves a dual function. It is 1 1 3 K3.531 3 /2" 31" 1 /8" X /8 " 1000 LBS removable which allows a woodworker to 1 1 3 2 8 8 CATALOG NOMINAL NOMINAL NOMINAL reverse the lower K Body jaw for use as a K3.540 3 / " 40" 1 / " X / " 1000 LBS 1 1 3 NUMBER THROAT OPENING PRESSURE spreader. It also functions as a levelling foot K3.550 3 /2" 50" 1 /8" X /8 " 1000 LBS 1 1 3 1 to keep the K Body rail parallel to the work K3.560 3 /2" 60" 1 /8" X /8 " 1000 LBS UK3.006 3 /8" 6" 550 LBS 1 1 3 1 surface. As an added benefit it serves as a K3.582 3 /2" 82" 1 /8" X /8 " 1000 LBS UK3.012 3 /8" 12" 550 LBS 1 1 3 1 hanger on a workshop peg hook. K3.598 3 /2" 98" 1 /8" X /8 " 1000 LBS UK3.018 3 /8" 18" 550 LBS 1 Bessey K Body Maxis® Table of Contents VarioPivot System 1. WOODWORKING CLAMPS K Body Clamp Family...... Page 1 • KBody clamps,Maxis, UniKlamp, Maxis System Bar Clamps ...... Page 3 • Tradesmen bar clamps, accessories and edge clamp, framing clamp, ES clamp sets, LM clamps, KliKlamps, PowerGrip Specialty Clamps ...... Page 5 • Angle clamps, vise clamps, variable angle strap clamp, miter clamp, edge clamps, Klemmy clamp, wood handscrew clamps • Duo Klamp, Clippix & VarioClippix, Big Orange urethane hammers, steel spring clamps, pipe clamps, solid surface clamps CATALOG NO. KBM 1 2. GRIP PLIERS...... Page 9 Cabinet makers, carvers and hobbyists alike will appreciate the • SuperGrips, MultiGrips, welder's forks etc. quality and usefulness of this member of the K Body family. The Bessey Maxis enables owners to maximize the use of a K Body by 3. INDUSTRIAL & WELDING CLAMPS turning it into a virtual European style tail vise for edge joining and surface planing operations. The Maxis can be used with any length Bessey All Steel Clamps ...... Page 11 K Body or even a pipe clamp. It can be fixed at any angle from 0° to • S, SQ, STB, medium and light duty clamps, lever clamps, J clamps, PowerGrip 270°, to hold the work at the most convenient angle. • maximum clamping flexibility – for planing, sanding, carving on Magnets ...... Page 13 edges or surfaces • welders, ground clamps and multi-purpose magnets and • maximum jaw opening – up to the length of your longest clamp specialty magnets for shop and home • maximum portability – easy, secure mounting on virtually any • Angle & corner clamps, spatter release work surface from workbench to tailgate Specialty Clamps ...... Page 15 • Claw clamps, high pressure clamps, VAD pads, T bar clamps, deep reach clamps, jig & fixture clamps, table clamps, C clamps Hold Downs...... Page 17 • RiteHites, Quick Sets, Kant-Twist ... and the X4 torque multiplier Industrial Hammers...... Page 19 Alvin Specialty Compounds...... Page 20

KP Framing System 4. BESSEY CUTTING TECHNOLOGY...... Page 21 • Compound leverage snips, special purpose snips, multipurpose Rail & Stile Jig for K Body Clamps cutters, cable and wire cutters, professional shears, pattern snips Packaged 4 to a set for quick, easy set-up for projects like raised panel doors, picture frames, and boxes; glue-resistant; for use with 5. RECO INDUCTION BEARING all K Body clamps from 12" to 98". HEATERS...... Page 23

CATALOG NO. KP BLOCKS WARNING: Always follow these rules of safety Clamps are temporary devices for holding work pieces together while you are working on them. They are not constructed nor intended for lifting, pulling, transporting or any other abnormal use. To guard against injury observe the following general safety rules: DO NOT use clamps for lifting, pulling or transporting; beyond maximum allowable pressure that can be applied by hand; in less than perfect condition or in incomplete condition; if improperly positioned; in applications of excessive vibration or with insufficient pressure; inadequate for a specific job or application (e.g. too light, too heavy or too few clamps); in applications of expanding inner pressure which will cause the tool to become overloaded; in applications of prolonged exposure to ambient temperatures exceeding 300°F (150° C) such as a closed oven. "Nominal Clamping Pressure" as referred to in this catalog is the maximum pressure/weight at which clamps can be operated. Maximum pressure/weight indications are given for new clamps with pressure applied by hand, without the use 2 of a pipe or any other device. Clamping pressure decreases as opening is increased. TradesmenTM Bar Clamps

7 1. Glue resistant plastic caps - protect work surface 6 2. Large diameter pad surface - minimizes dimpling 3. Oversized Acme threaded spindle - faster clamping with less cranking for smooth operation. Work-hardened for strength. 4. Large wood handle - for power and comfort 5. Profiled, cold drawn steel rail - engineered to minimize flexing common to ordinary flat railed clamps; made in Bessey's own mill for top quality; galvanized to prevent rust 1 6. Unique locking mechanism - separates Bessey from “clutch style” clamps. Set screw is permanently molded into the sliding arm to interlock with serration on six sides of the rail. 2 5 7. Bessey's fine quality, malleable cast jaws - corrugated for strength; press fitted to rail - no mechanical fastener to loosen; powder coated

TradesmenTM MEDIUM DUTY Clamps TradesmenTM HEAVY DUTY Clamps Edge Clamps NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL CATALOG THROAT NOMINAL RAIL CLAMPING CATALOG THROAT NOMINAL RAIL CLAMPING Quickly converts Tradesmen and NUMBER DEPTH OPENING SIZE PRESSURE NUMBER DEPTH OPENING SIZE PRESSURE most standard bar clamps to a three 1 3 7 19 3 2 8 X 16 LBS TG2.004 2" 4" /32" X /16" 450 LBS. TGK4.516 4 / " 16" 1 / " / " 1540 . way edge clamp — ideal for edge 1 3 7 19 3 2 8 X 16 LBS gluing, such as applying wood trim to TG2.006 2" 6" /32" X /16" 450 LBS. TGK4.524 4 / " 24" 1 / " / " 1540 . 1 3 7 19 3 2 8 X 16 LBS counter tops. TG2.008 2" 8" /32" X /16" 450 LBS. TGK4.531 4 / " 31" 1 / " / " 1540 . 1 3 7 19 3 2 8 X 16 LBS TG2.010 2" 10" /32" X /16" 450 LBS. TGK4.540 4 / " 40" 1 / " / " 1540 . 1 3 7 19 3 2 8 X 16 LBS TG2.012 2" 12" /32" X /16" 450 LBS. TGK4.550 4 / " 50" 1 / " / " 1540 . 1 3 7 1 1 2 8 X 16 LBS TGJ2.506 2 /2" 6" 1" X /4" 600 LBS. TGK4.560 4 / " 60" 1 / " / " 1540 . 1 3 7 1 1 2 8 X 16 LBS TGJ2.512 2 /2" 12" 1" X /4" 600 LBS. TGK4.579 4 / " 79" 1 / " / " 1540 . 1 3 7 1 1 2 8 X 16 LBS TGJ2.518 2 /2" 18" 1" X /4" 600 LBS. TGK4.598 4 / " 98" 1 / " / " 1540 . 1 1 3 1 1 2 4 X 8 LBS TGJ2.524 2 /2" 24" 1" X /4" 600 LBS. TG5.512 5 / " 12" 1 / " / " 1320 . 1 1 3 1 1 2 4 X 8 LBS TGJ2.530 2 /2" 30" 1" X /4" 600 LBS. TG5.524 5 / " 24" 1 / " / " 1320 . 1 1 3 1 1 2 4 X 8 LBS TGJ2.536 2 /2" 36" 1" X /4" 600 LBS. TG5.540 5 / " 40" 1 / " / " 1320 . 1 3 1 1 4 X 8 LBS TG3.212 3 /4" 12" 1" X /4" 600 LBS. TG7.016 7" 16" 1 / " / " 1320 . 1 3 1 1 4 X 8 LBS CATALOG NUMBER TG3.216 3 /4" 16" 1" X /4" 600 LBS. TG7.024 7" 24" 1 / " / " 1320 . 1 3 1 1 4 X 8 LBS TG3.220 3 /4" 20" 1" X /4" 600 LBS. TG7.040 7" 40" 1 / " / " 1320 . 5-1 (Single Spindle) 1 3 1 1 TG7.048 7" 48" 1 /4" X /8" 1320 LBS. TG3.224 3 /4" 24" 1" X /4" 600 LBS. 5-2 (Double Spindle) 1 1 5 4 X 2 LBS TG4.008 4" 8" 1" X /16" 880 LBS. CDS 20-10WP 10" 20" 1 / " / " 1550 . 1 1 5 4 X 2 LBS TG4.012 4" 12" 1" X /16" 880 LBS. CDS 20-12WP 12" 20" 1 / " / " 1550 . 1 1 5 4 X 2 LBS TG4.016 4" 16" 1" X /16" 880 LBS. CDS 20-20WP 20" 20" 1 / " / " 990 . 1 5 TG4.524 4 /2" 24" 1" X /16" 1100 LBS. 1 5 TM TG4.540 4 /2" 40" 1" X /16" 1100 LBS. Tradesmen Replacement Protective Pads

TRP2.5 (fits TGJ2.5) TRP4.0 (fits TG4.0) SKS10/20 (universal - fits TG2.004 to TG4.008) TRP4.5 (fits TG4.5) TRP5.5 -(fits TGK4.5, TG5.5 & TG7.0) SKS20/40 - (universal - fits TG4.008 to TG7.048) 3 LMTM General KliKlamp PowerGripTM Purpose Clamps LM clamps are built for economical light duty clamping for hobbyists and professional woodworkers. Packed with the features that you expect in a Bessey - cast jaws; bright drawn serrated steel rail; large Acme threaded spindle, non-marring cap. A

NOMINAL NOMINAL NOMINAL From a "light-as-a-feather" touch up to CATALOG THROAT NOMINAL RAIL CLAMPING 330 lbs, always the right pressure. Quick NUMBER DEPTH OPENING SIZE PRESSURE clamping, quick release on virtually any shape. 19 7 The KliKlamp's ratchet action resists vibration LM2.004 2" 4" /32" X /32" 330 LBS. 19 7 ... the perfect clamp around power tools! LM2.006 2" 6" /32" X /32" 330 LBS. 19 7 LM2.008 2" 8" /32" X /32" 330 LBS. For larger projects, see the 19 7 Ratchet Action Lever Clamp on Page 12 LM2.012 2" 12" /32" X /32" 330 LBS. 19 7 LM3.006 3" 6" /32" X /32" 440 LBS. NOMINAL NOMINAL 19 7 B C LM3.008 3" 8" /32" X /32" 440 LBS. THROAT JAW NOMINAL 19 7 AT O EPTH PENING RESSURE LM3.012 3" 12" /32" X /32" 440 LBS. C .N D O P 19 7 LBS LM3.018 3" 18" /32" X /32" 440 LBS. KLI3.004 3" 4" 330 19 7 LBS LM3.024 3" 24" /32" X /32" 440 LBS. KLI3.008 3" 8" 330 19 7 LBS LM3.030 3" 30" /32" X /32" 440 LBS. KLI3.012 3" 12" 330 19 7 LM3.036 3" 36" /32" X /32" 440 LBS. 31 15 LM4.008 4" 8" /32" X /64" 550 LBS. ES Irregular Angle Clamp Set 31 15 LM4.012 4" 12" /32" X /64" 550 LBS. 31 15 LM4.016 4" 16" /32" X /64" 550 LBS. The Ultimate One-hand Clamp 31 15 LM4.024 4" 24" /32" X /64" 550 LBS. ... with variable pressure. 31 15 LM4.032 4" 32" /32" X /64" 550 LBS. For light clamping pressure: squeeze the handy two-way lever either from the (A) rail Timber Framing Clamp side or the (B) handle side of the clamp. For up to 1,000 lbs. clamping pressure: give a hefty crank on the (C) power handle. Standard Bessey quality features: Glue resistant, non-marring plastic caps; large diameter pad surface; oversized Acme thread; large wood handle; profiled, cold drawn steel rail engineered to minimize flexing,galvanized to prevent rust. Used with the Bessey TGK series, this ball & socket system facilitates direct pressure on Added features: quick release button for 0 0 rapid sliding arm action; Glass-fiber, Designed for the construction trades - a firm irregular angles from 15 to 180 . The ES Set consists of two glue-resistant, glass reinforced polymer housing and hand lever hammer-blow to the striking surface drives fiber pressure caps and two clamping blocks with are light in weight but tough enough for the penetrating spike into framing timber. anti-slip, non-marring inlaid pads. industrial use. Flared depth-stop sets spike to appropriate depth and it is also notched for easy removal Nominal Clamping Pressure: ES SET: includes two blocks and two caps with claw hammer. The timber clamp features Using the lever: up to 200 lbs. drop-forged steel jaws, cold-drawn profiled ES24/6 SET: includes two blocks, two caps Using power handle: up to 1,000 lbs. galvanized steel rail, high strength tommy bar and three Tradesmen Bar Clamps (one 24" – TGK4.524 & two 6"– TGJ2.506) and swivel mounted pressure plate. This is a NOMINAL CATALOG THROAT NOMINAL tough clamp that adds another hand to the ES31/6 SET: includes two blocks, two caps NUMBER DESCRIPTION DEPTH OPENING framer's tool kit. and three Tradesmen Bar Clamps (one 31" –TGK4.531 & two 6"– TGJ2.506) PG-12 aluminum handle4" 12" CATALOG NO.NOMINAL THROAT NOMINAL JAW ES40/6 SET: includes two blocks, two caps PG-24 aluminum handle4" 24" DEPTH OPENING and three Tradesmen Bar Clamps (one 40" PG4.012 wood handle 4" 12" 3 –TGK4.540 & two 6"– TGJ2.506) 4 TF4.7524 4 /4" 24" PG4.024 wood handle 4" 24" WS Angle Clamps Vise Clamps Variable Angle Strap Clamp

Holds and aligns material at a 90° angle ... adjusts automatically to wood Highly versatile, the S-10 and S-15 vise thickness. Accurate, ideal for cabinetry clamps are ideal for holding rounds, 4 Features: Galvanized spindle; Acme rectangles and odd-shaped objects. 5 thread; die cast jaws - plastic-coated to Their lightweight, sturdy construction protect work; designed for clearance for makes this a great tool for home, dowels, screws or staples while gluing. The Bessey high cottage, hobby or recreational use ... 6 performance VAS-23 and is particularly suited to holding Variable Angle Strap Clamp delicate mechanical parts or assemblies. is more functional and convenient The Vise Clamps feature: a galvanized than ordinary generic strap clamps. spindle with large Acme thread; non- 1.Corner clip with Vario-Angle swivel pads marring, glue-resistant jaws; removable - clamps any and all angles from 600 to galvanized guide bars- which when 1800 . Four clips are included with the removed allow jaws to swivel clamp. Extra clips can be purchased accommodating separately, six to a package. irregular 2.23 ft. polyester strap - woven like a seat DIFFERENT UNIFORM CLEARANCE shapes. belt, up to 1,100 lbs. tensile strength with CATALOG MATERIAL MATERIAL FOR minimal stretch NUMBER THICKNESS THICKNESS T-JOINTS 3.Easy-to-use strap lock - mechanism 7 1 WS-3 SIDE ONE: /8" SIDE ONE: 2" 1 /8" releases and locks strap around awkward 1 SIDE TWO:2/2" SIDE TWO:2" or large assemblies.

7 4.Strap winder - stores strap tangle free WS-6 SIDE ONE:1" SIDE ONE:4" 2/16" and out from under foot. Crank can be SIDE ONE: 6" SIDE TWO:4" mounted on either side for left or right hand rewinding. WS-1 Angle Clamp CATALOG NOMINAL NOMINAL Dual Tightening Mechanism: NUMBER OPENING WIDTH 5.Geared rewind mechanism - for precise 0 An economical fixed 90 angle clamp for adjustment - tightens strap evenly from S-10 4" 3 5/8" miter or butt joints. Holds work up to 3", both sides for distortion-free clamping. S-15 6" 3 5/8" mounting holes for fixing to work surface 6.Torque Handle - ergonomic design for comfort and easy application of maximum TK-6 table clamps ... pressure hold Bessey table-top clamps onto a work surface – one pair is included with the S-10 and S-15 Vise Clamps. They are also available as an accessory for the WS-3 CAT.NO.MATERIAL THICKNESS and the WS-6 Angle Clamps. WS-1 UP TO 3"

For creating angled joints from 450 to Miter Clamp 1200. The swivel clamping jaws, fitted with non-marking surfaces, will draw joint together as the screw is tightened, regardless of the angle. Rigid steel base fitted with 3 large anti-slip pads. Clamp CATALOG STRAP STRAP body is made of CATALOG MAXIMUM NUMBER WIDTH LENGTH shock resistant NUMBER OPENING super polyamid. VAS-23 1" 23 FT. GS-11 4" VAC-6 – SET OF 6 ADDITIONAL CLIPS 5 Professional One Heavy Duty Klemmy TM Clamps Hand Edge Clamp 3-Way Edge Clamp Tightens and secures with a simple Ideal for edge gluing, gluing curved twist of the handle! laminations or for use on solid surface material like granite

The cam action of the Klemmy Clamp is excellent for delicate and light duty clamping applications such as veneering, marquetry, The Heavy Duty 3-Way Edge Clamp features: The Bessey Professional One Hand Edge musical instrument building and repair, as extra heavy cast frame that will not distort Clamp was engineered with the custom, well as antique restoration. The Bessey and bind on the edge screw; tommy bar for production woodworker in mind. The unique Klemmy clamp features a more traditional easy tightening and strong clamping pressure; compound screw mechanism, enables the look and feel with light weight, non-marring large Acme thread ... more power in less turns; operator to simultaneously engage the top wooden jaws and cork protective pads. extra large plastic pads prevent dimpling and bottom pressure pads while applying of workpiece and marring of finished materials. pressure to the front edge of a countertop. CATALOG NOMINAL NOMINAL NUMBER THROAT DEPTH OPENING All three pressure surfaces are advanced CATALOG NOMINAL NOMINAL KLW4.008 4" 8" with the turn of a single handle. The NUMBER THROAT OPENING KLW4.012 4" 12" cushioned pads firmly grip without TWC-3HD 31/4"3" slipping or damaging the work surface. This KLW4.016 4" 16" clamp has a maximum clamping pressure of Also see page 3 for edge clamp fixtures KLW4.024 4" 24" 500 lbs. on thickness up to 2 1/8". The and the Tradesmen Series Bar Clamps KLW4.039 4" 34" Bessey Professional One Hand Edge Clamp works beautifully when applying solid wood edging onto straight edged countertops or Bessey Wood Handscrew Clamps when bending solid wood edging into curves. Bessey Wood Handscrew Clamps - feature The Bessey Professional One Hand Edge a large diameter spindles for added strength Clamp features: and durability. Spindles and swivel nuts are • Lightweight, aluminum frame ... optimized made from cold drawn, carbon steel. Acme for high static stress loads. Micro-coated thread for rapid operation and years of hard surface prevents corrosion and use. Hardwood handles are over-sized for discoloration • Large Jaws ... with integral, soft plastic comfort, extra torque and reinforced with caps for gentle, non-slip clamping steel ferrules. The spiral pin used to secure 1 • Large opening ... for clamping up to 2 /8" the handles to the spindle is easy to remove • Ergonomically shaped handle ... designed for repair or replacement. Metal parts are for one-handed use, provides secure grip treated to resist rust. The jaws, made from – made of impact resistant plastic quality hard maple for a lifetime of use, are oiled to resist glue.

CATALOG JAW MAX.JAW THROAT SPINDLE NUMBER LENGTH OPENING DEPTH DIAMETER

1 1 HS-4 4" 2 /4" 2" /4" 3 1 1 HS-5 5" 2 /4"2/2" /4" 5 HS-6 6" 3" 3" /16" 7 HS-8 8" 5" 4" /16" CATALOG NOMINAL NOMINAL 7 HS-10 10" 7" 5" /16" NUMBER THROAT OPENING 1 7 HS-12 12" 9 /4"6"/16" 1 EKT-55 3" 2 /8" 1 7 6 HS-14 14" 10 /4"7"/16" Bessey DuoKlamp Bessey VarioClippix The one-handed clamp & spreader with a unique "twist"! The spring clamp with a big appetite for work!

Clamp or spreader ...

The VarioClippix is a clever variation on a standard spring clamp. ... with the twist The handles stay at a constant setting, making it comfortable in the of a dial! hand ... infinitely adjustable jaws open up to 4" - one clamp does No more disassembling the jaws of the clamp to convert it to a the work of four different spring clamps. spreader. The super new DuoKlamp incorporates a handy mini-dial that • Soft anti-slip two component handle for comfort reverses the action from clamping to spreading ... with a simple twist! • Soft pads on jaw pressure points to eliminate marring of work The DuoKlamp also features: • Hand pressure remains constant for all openings • smooth, easy one-handed pump action • Variable jaw openings allow control on clamping pressures ... • durable, glue resistant composite material opening jaws beyond size of work piece reduces jaw pressure and • soft-touch, removable/reversible pressure pads protects work surface from marring • clamps or spreads front, side and behind the rail for wide use CATALOG NOMINAL NOMINAL CLAMPING • well balanced for single-handed use NUMBER DEPTH OPENING PRESSURE • extremely large clamping surface 1 5 • Clamping pressure of over 260 lbs. XV3-50 1 /2" up to 2 /8" variable 1 XV5-100 2" up to 4 /4" variable

CLAMPING SPREADING AB Bessey Clippix CATALOG NOMINAL NOMINAL NOMINAL NOMINALNOMINAL NOMINAL NUMBER DEPTH OPENING DEPTH OPENING DEPTH OPENING The same Bessey quality in a standard fixed pivot spring clamp.

1 1 1 1 DUO16-6 2 /2"6"2 /4"8 /2" /4"6" 1 1 1 DUO30-6 2 /2" 12" 2 /4" 14" /4" 12" CAT.NOMINAL MAXIMUM 1 1 3 1 DUO16-8 3 /4"6"3"9 /4" /8"6 /2" NO.OPENING OPENING

1 3 1 DUO30-8 3 /4" 12" 3" 15" /8" 12" XC2 1" 1 /8" 1 3 1 1 DUO45-8 3 /4" 18" 3" 21" /8" 18 /2" XC5 2" 2 /2" 1 3 DUO65-8 3 /4" 24" 3" 27" /8" 26" XC7 3" 3" 7 Big OrangeTM Bessey Seaming Tool for Urethane Hammers Solid Surface Installation These non-marring, shock-absorbing assembly Vacuum Cups … instantly secures the Work Hardened Steel Spindle … smoothly mallets are virtually indestructible. The solid PS55 to any smooth, non-porous material draws deck seams together with just the urethane head won't mushroom or split and will such as solid surface, SSV laminate, marble right pressure. Galvanized spindle will hold not damage the work surface. Tough fiberglass and granite to eliminate the need for glue up to years of wear. handles hold up to years of use and are blocks. Cup made from rugged high- vibration dampening for reduced worker fatigue. Oversized Wooden Handle … comfortable pressure aluminum alloy with the highest for any hand. Comfortable grips are ribbed to be non-slip. quality rubber diaphragm. Cold Drawn Guide Rods … create a solid, Vacuum Operating Lever … activates and CAT.HEAD HEAD HANDLE rigid frame for supporting vacuum cups and locks the vacuum seal on the work surface. NO.DIAMETER LENGTH LENGTH leveling toggles... minimizing panel lifting. 5 1 Quick release. Completely portable. 790 1 /8"2/2" 10" 7 1 1 Leveling Toggles … this unique feature 791 1 /8"3/4"10/2" 5 7 1 easily and accurately levels deck joints 792 2 /16"3/8"12/2" 3 5 1 during seaming ... reducing the need for 793 2 /4"4/8"12/2" sanding.

Cat. Nominal Nominal Nominal Nominal B No. Span Width Length Pressure ABC PS55 2.1" 5.1" 9.4" - 11.6" 48.5 lb.

Bessey Traditional Bessey Pipe Back Splash Clamp Steel Spring Clamps Clamp Fixtures These clamps feature: heavy duty springs for These clamps feature: plated spindles to more pressure and longer life; nickel plated prevent rust & corrosion; “clutch” action – won’t rust or mark work piece; heavy duty grips bar automatically; large clamping vinyl tips and handles won’t mar clamping surface – positive grip; large handle – surfaces. positive pressure. The Bessey VGCCK-1 “V- groove” Mitered-Cove, Back-Splash Clamp ... draws the two primary pieces of backsplash together at a 90° angle and then draws the 45° mitered corner in tight without using seaming tape. Rugged, lightweight and glue- resistant this tool is an economical and fast way to prepare mitered cove backsplash and drop edges. pipe not included The Bessey S-15 Backsplash Clamp ... holds the backsplash at 90° to the top deck without additional squaring accessories and is an ideal clamp for seaming with glue blocks. Features large, slip-proof, glue CAT.NOMINAL MAXIMUM CLAMPING CATALOG resistant jaws and over-sized handle for NO.OPENING OPENING PRESSURE NUMBER DESCRIPTION comfort and easy adjustment. Ideal for holding alignment while fabricating 1 XM3 1" 1 /4" 33.0 LBS. PC-12 fits 1/2" black pipe (not included) edge build-ups. Works 1 XM5 2" 2 /4" 49.5 LBS. PC-34 fits 3/4" black pipe (not included) with solid surface, 5 laminate, granite and XM7 3" 3 /16" 66.0 LBS. PCDR-34 deep reach fixture fits 3/4" black marble. 8 XM10 4" 5" 63.0 LBS. pipe (not included) A wide range of Bessey grip plier TM designs for a broad variety of uses. Bessey SuperGrips TM MultiGrip With ordinary grip pliers, the jaw opening Bessey SuperGrips solve these problems by Slim plier-type jaw opens in two stages for has to be adjusted manually each time they combining the jaw adjustment of their "pre-clamping" effect ... allows adjustments are used. Besides being awkward, finicky legendary sliding-arm clamps ... with the before applying maximum pressure. and and time consuming ... clamping functionality of the grip pliers design. The Integrated locking devise to pre-set jaw pressure cannot be controlled. In addition, best of both worlds! opening for repetitive work. MultiGrips come the jaws of the ordinary grip pliers by their with plastic jaw caps. design do not remain parallel with each other.

Infinitely adjustable jaw made of Rail made of cold drawn hardened chrome- profiled steel ... from vanadium steel. Bessey's own drawing mill, optimized for high static stress loadings. Screw with lock nut ... for clamping pressure adjustment.

NOMINAL NOMINAL CATALOG THROAT NOMINAL CLAMPING NUMBER DEPTH OPENING PRESSURE

SG2-MGR 23/4"21/2" 222 LBS. Convenient, plastic coated release lever ... ergonomically designed Welder's Fork and free of kickback. Forked jaws clamp two workpieces together over an obstruction Serrated, non-slip hardened profile lower jaw ... shaped for universal use. SCREW WITH LOCK NUT ... permits adjustment of jaw angle for clamping tapered parts (up to 7°).

NOMINAL NOMINAL Deep Reach CATALOG THROAT NOMINAL CLAMPING Clamps over angle iron, channel iron and NUMBER DEPTH OPENING PRESSURE other assemblies or obstruction. STANDARD SUPERGRIPS VarioGrip Welder's Fork SG-4 21/2" 4" 440 LBS. 1 2 sliding heads that can be adjusted SG-4WP(w/pads) 2 /2" 4" 440 LBS. independently ... at different heights AND SG-8 21/2" 8" 440 LBS. depths SG-8WP(w/pads) 21/2" 8" 440 LBS.

Pipe Clamp WELDER'S GROUND SUPERGRIPS (400 AMP)

"Cradle" jaw aligns and holds pipe firmly in place SG-GC 21/2" 4" 310 LBS.

SUPERGRIP ACCESSORIES SG PADS (SET OF 2 PADS FITS SG-4 AND SG-8)

SG Protective pads ... available for the SG-4 and SG-8 NOMINAL NOMINAL NOMINAL NOMINAL CATALOG THROAT NOMINAL CLAMPING CATALOG THROAT NOMINAL CLAMPING NUMBER DEPTH OPENING PRESSURE NUMBER DEPTH OPENING PRESSURE

WELDERS’ FORK DEEP REACH

SG24-WF 3" 4" 310 LBS. SG5-DR 3" 41/2" 310 LBS.

VARIOGRIP WELDERS’ FORK PIPE CLAMPS SG24-VWF 3" 4" 310 LBS. SG24-PC 23/4"41/2" 310 LB. 9 The Legendary Bessey Heat Treated, Steel Clamps

The Bessey Difference The backbone of our clamp is the legendary steel rail ... and it distinguishes the Bessey steel clamp from all others. From our origins, we built our reputation as a steel company and make every rail in our own mills. From raw material to the finished rail ... that is the Bessey difference.

Rolled steel ... bright drawn ... heat formed ... quenched and tempered.

1. Rail, fixed jaws and pressure plate heat-formed in one 1 piece from cold drawn profiled steel …optimized for high static stress loadings, tempered and electro-galvanized. 2. Tempered Steel Sliding Arm* ... drop forged, electro- galvanized. 3. High-strength electro-galvanized tommy bar handle … with ergonomically rounded ends for power-tightening 4. Heat treated, high carbon Acme threaded screw* … is tempered and quenched to give you greater loading 5 capacity and longer service life. Spatter resistant. 5. Unique Bessey Morpad* tilts to 350 … tempered thrust bolt can be unscrewed for easy maintenance or replacement.

The Replaceable Bessey Morpad Safety Factor ... Unlike 2 ordinary pads using a common ball and socket fixture, the unique Bessey Morpad has a hemispherical design instead of an ordinary round ball ... the result is a greater angle of pivot AND a pad that won't pop out of its socket under pressure for added safety.

* Replacement Parts: drop forged sliding arms, Acme threaded spindles and Morpads are available for many of the Bessey all-steel clamps. 10 Bessey Bessey SQ and STB Series Clamps S Series Clamp with Standard Swivel Pad with Morpad SQ Series

STB Series SQ, STB and S Series clamps offer a greater reach often replacing the need to buy both regular AND deep throat clamps.

NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL CATALOG NOMINAL THROAT CLAMPING RAIL CATALOG NOMINAL THROAT CLAMPING RAIL NUMBER OPENING DEPTH PRESSURE SIZE NUMBER OPENING DEPTH PRESSURE SIZE

1800 Series Medium Duty Clamps – with Morpad SQ Series Clamps with standard swivel pad 3 1 1 3 27 13 1800S-8 8" 4 /4 " 1800 lbs. 1 /16" x /2" SQ-4 6" 4 /4" 1330 lbs. /32" x /32" 3 1 1 3 3 9 1800S-12 12" 4 /4 " 1800 lbs. 1 /16" x /2" SQ-8 8" 4 /4" 2660 lbs. 1 /16" x /16 " 3 3 9 SQ-10 10" 4 /4" 2660 lbs. 1 /16" x /16 " 1 3 9 2400 Series Regular Duty Clamps – with Morpad SQ-12 12" 5 /2" 2660 lbs. 1 /16" x /16 " 1 3 9 3 3 9 2400S-6 6" 5 /2" 2660 lbs. 1 /16" x /16" SQ-20 20" 4 /4" 2660 lbs. 1 /16" x /16 " 1 3 9 2400S-8 8" 5 /2" 2660 lbs. 1 /16" x /16" 1 3 9 2400S-10 10" 5 /2" 2660 lbs. 1 /16" x /16" STB Series Clamps with standard swivel pad and hex head spindle 1 3 9 2 16 16 2400S-12 12" 5 / " 2660 lbs. 1 / " x / " 9 3 LBS 16 X 4 1 3 9 STB30 12" 7" 4880 .1 / " / " 2400S-20 20" 5 /2" 2660 lbs. 1 /16" x /16" 9 3 1 3 9 STB50 20" 7" 4880 LBS.1 /16" X /4" 2400S-40 40" 5 /2" 2660 lbs. 1 /16" x /16" 1 3 9 9 3 2400S-60 60" 5 /2" 2660 lbs. 1 /16" x /16" STB100 40" 7" 4880 LBS.1 /16" X /4"

4800 Series Heavy Duty Clamps – with Morpad 9 3 4800S-12 12" 7" 4880 lbs. 1 ⁄16" x ⁄4" 9 3 4800S-20 20" 7" 4880 lbs. 1 ⁄16" x ⁄4" 9 3 4800S-40 40" 7" 4880 lbs. 1 ⁄16" x ⁄4" 9 3 4800S-48 48" 7" 4880 lbs. 1 ⁄16" x ⁄4" 9 3 4800S-60 60" 7" 4880 lbs. 1 ⁄16" x ⁄4" The little clamp that does the 7200 Series Extra Heavy Duty Clamps – with Morpad work of a 1", 2" or 3" C clamp 15 ... but does it 9X faster! 7200S-12 12" 8" 7770 lbs. 1 ⁄16" x 1" 15 7200S-20 20" 8" 7770 lbs. 1 ⁄16" x 1" The MightyMini’s sliding-arm 15 7200S-40 40" 8" 7770 lbs. 1 ⁄16" x 1" moves to position itself right next to your work-piece to support the Acme threaded screw! By comparison, when a 3” C-clamp is used to do the job of a 1” C- 4800S clamp, the point of support for the screw does NOT move ... leaving the extended screw to do all the work. The result can be a clamp that “walks” ... or worse, a screw that bends or 1800S breaks.

2400S NOMINAL NOMINAL CATALOG NOMINAL THROAT CLAMPING NUMBER OPENING DEPTH PRESSURE

1 MMS-4 4 " 2 /4" 660 LBS. 1 7200S MMS-8 8 " 2 /2" 660 LBS. 11 Bessey Light to Medium Duty Clamps with Standard Swivel Pad

WOOD HANDLE

The Bessey Rapid Bessey “Step-Over” Action Lever Clamp J-Series Clamps Designed for applications where vibration All the great features of the legendary TOMMY BAR HANDLE causes a conventional clamp to “walk” ... the Bessey Sliding arm clamps ... PLUS a lever clamp stays firmly in place even when feature that adds a ton of flexibility to used with power tools. clamping. The return rail lets the • features the legendary Bessey galvanized J clamps “step-over” the lip on channel heat-treated rail and drop forged sliding arm iron, angle-iron, I-beam or other • surface hardened, steel cam and pressure plate for exceptional wear obstructions. • poly coated release trigger and powder NOMINAL NOMINAL NOMINAL coated clamping lever ... for comfort, CATALOG THROAT NOMINAL RAIL CLAMPING leverage and long life NUMBER DEPTH OPENING SIZE PRESSURE • rapid lever action increases speed and productivity in multiple clamp applications LIGHT PRESSURE SERIES - WOOD HANDLE, STANDARD PAD • available in conventional AND "step-over" G10Z 7 7 2" 4" /16" X /32" 330 LBS. style rails for range of use 7 7 G15B5Z 2" 6" /16" X /32" 330 LBS. 7 7 G20B5Z 2" 8" /16" X /32" 330 LBS. NOMINAL NOMINAL 7 7 G30B5Z 2" 12" /16" X /32" 330 LBS. CATALOG THROAT NOMINAL CLAMPING 1 17 1 NUMBER DEPTH OPENING PRESSURE G12Z 2 /2"5" /32" X /4" 450 LBS. 1 17 1 STANDARD HANDLE G40B6Z 2 /2" 16" /32" X /4" 450 LBS. 1 3 17 1 LC-4 2 /8" 4" 400 LBS. Available in a conventional all-steel G50B6Z 2 /2" 20" /32" X /4" 450 LBS. 1 LC-6 3 /8" 6" 500 LBS. clamp style as well as a lever clamp for 300 & 500 SERIES - WOOD HANDLE, STANDARD PAD LC-8 4" 8" 770 LBS. a wide range of uses. 3 7 7 4 LBS 300S-4 2" 4" /16" X /32" 330 LBS. LC-10 4 / " 10" 880 . 1 5 9 LC-12 5 /2" 12" 1110 LBS. NOMINAL NOMINAL NOMINAL 8 X 32 LBS 500S-6 3" 6" / " / " 550 . CAT.THROAT NOMINAL RAIL RAIL CLAMPING 3 3 LC-20 5" 20" 1440 LBS. 500S-8 4" 8" /4" X /8" 660 LBS. NO.DEPTH OPENING RETURN SIZE PRESSURE 1 15 FFSET ANDLE 500S-12 5 /2" 12" 1" X /32" 1200 LBS. O H ... for more leverage 1 3 9 2 16 16 1 J24-12 5 / " 12" 4" 1 / " X / " 2660 LBS. 1800L-12 5 /2" 12" 1800 LBS. 1 9 3 1200 SERIES - TOMMY BAR HANDLE, STANDARD PAD J48-20 5 /2" 20" 4" 1 /16" X /4" 4880 LBS.. J-SERIES LEVER CLAMP ... with offset handle 1200S-8 1 8" 15 1 1 13 9 5 /2" 1" X /32" 1200 LBS. 1 2 4 16 16 LBS JLC24-12 5 /2" 12" 1800 LBS. JLC24-12 5 / " 12" 4 / "1 / " X / " 1800 . 1 15 1200S-12 5 /2" 12" 1" X /32" 1200 LBS.

LIGHT DUTY SERIES - TOMMY BAR HANDLE, STANDARD PAD TM 1 5 9 G16ZK 3 /4"6" /8 " X /32" 550 LBS.. PowerGrip 3 3 G20ZK 4" 8" /4" X /8" 660 LBS. with aluminum Handle 3 15 G40ZK 4 /4" 16" 1" X /32" 1660 LBS. 3 The Ultimate One-hand Clamp ... also G50ZK 4 /4" 20" 15 1660 LBS. 1" X /32" available with a wood handle ... see page 4 3 4 15 LBS G60ZK 4 / " 24" 1" X /32" 1660 . for full description. 3 G80ZK 4 /4" 31" 15 1660 LBS. 1" X /32" Nominal Clamping Pressure: 3 G100ZK 4 /4" 40" 15 1660 LBS. 1" X /32" Using the lever - up to 200 lbs. 3 15 G125ZK 4 /4" 50" 1" X /32" 1660 LBS. Using power handle - up to 1,000 lbs.

MEDIUM DUTY SERIES - TOMMY BAR HANDLE, STANDARD PAD NOMINAL 3 SGL20 4 /4" 8" 1 1/16" X 1/2" 1800 LBS. CATALOG THROAT NOMINAL 3 NUMBER DESCRIPTION DEPTH OPENING SGL25 4 /4" 10" 1 1/16" X 1/2" 1800 LBS. 3 SGL30 4 /4" 12" 1 1/16" X 1/2" 1800 LBS. PG-12 aluminum handle4" 12" 3 SGL40 4 /4" 16" 1 1/16" X 1/2" 1800 LBS. PG-24 aluminum handle4" 24" 3 SGL50 4 /4" 20" 1 1/16" X 1/2" 1800 LBS. PG4.012 wood handle 4" 12" 3 4 /4 1 1 PG4.024 wood handle 4" 24" 12 SGL60 " 24" 1 /16" X /2" 1800 LBS. Welder’s Multi-Angle Vise Set Angle and Corner Clamps Dual vises swivel independently 5° to 180° • set screws lock at pre-determined angle • Copper plated screw resists weld spatter • Slotted cast iron base mounts to work table • Vises can each be used independently

CATALOG JAW JAW NOMINAL NUMBER HEIGHT LENGTH OPENING

WVS-4 11/2"5"4"

Welder’s Corner Clamps • Open construction for easy access to work • Holds different thickness of metals at 90°. WSM 9 and 12 One-handed, Self-centering Jig & Fixture Clamps

• Unobstructed working area - easy access for welding, assembly and through-ways for T-joints. • Base and clamping block made of high-grade cast iron, precision milled, electro-galvanized • Copper plated Acme screw resists against weld spatter CAT.NO NOM.OPENING • Jaws and base machined at precise right angles to each other H94/1 2" H94/2 4" • Swivel-mounted spindle nuts ... with grease nipples for easy maintenance and long service life • Slotted base holes mount easily to work table. High walls easily holds pipe and square tubing • Floating head and rotating spindle holds, fixes and aligns different material thicknesses at a 90° angle. Ideal for plates, angle iron, square tubing, pipe, channel iron, etc. Bessey PASSAGE TOTAL MITER CATALOG JAW JAW FOR CAPACITY JOINTS Spatter NUMBER HEIGHT LENGTH “T” JOINTS FOR SIDES EACH SIDE Release WSM-9 11/2"4"21/2"7"31/2" ... prevent spatter WSM-12 21/2"41/2"4"91/2"43/4" sticking to work surface and build-up Welder’s Magnetic Ground Clamps on M.I.G. nozzles WATER BASED Spatter Release: won't harm • Spring loaded electrode secures ground to painted surfaces, welds through when wet, work surface; rotating stud assembly environmentally friendly ... non-flammable, non- allows ground wire to rotate 360°– free of 250 AMP. toxic, biodegradable. work area. SOLVENT BASED Spatter Release: Heat resistant to • Ground clamps are fitted with handles for withstand high temperatures, paint compatible and ease-of-use. Connection stud is 1/2". the spray agent dries quickly - leaves a long lasting spatter release coating ... NO silicones, CFC's or trichloroethylene, uses CO2 propellant, CATALOG MAX.NOMINAL AVERAGE non-flammable. NUMBER AMP.HEIGHT PULL 800 AMP. CAT. NO. DESCRIPTION CAN SIZE MGC-1 250 AMP. 2" 55 LBS. 16300-16 WATER BASED 16 OZ AEROSOL 1 MGC-2 800 AMP.2/2" 55 LBS. 1620-16 SOLVENT BASED 16 OZ AEROSOL 13 Multi-Purpose Magnetic Squares • "... like having an extra hand." • Quality, ferrite and rare earth magnets for fast, simple set-ups • Holds work at set angles ... double magnets at ANY angle • Larger models have “T” handles to “break” magnet from work

WMS-1 WMS-3 WMS-4 CMS-1 AVERAGE PULL: 66 LBS. AVERAGE PULL: 55 LBS. AVERAGE PULL 110 LBS. AVERAGE PULL: 100 LBS. 3 3 5 1 3 5 3 3 5 3 3 5 4 8 8 3 /8" W. X 3 /8" H. X /8" D. 3 /8" W. X 3 /8" H. X /8" D. 6 /8" X W. X 3 /8"H. X /8"D. 3 / " W. X 4 / " H. X 1 / "D.

WMS-5 WMS-6 WMS-7 BDMS-1 AVERAGE PULL: 100 LBS. AVERAGE PULL: 112 LBS. AVERAGE PULL: 52 LBS. AVERAGE PULL 41 LBS. 5 3 3 3 3 3 3 1 3 5 X X 8 3 /4" W. X 4 /8" H. X /4" D. 3 /4" W. X 4 /8" H. X /4".D 6 /8"W. X 3 /8"H. X /8"D. 8" W. 8" H. 1 / " D.

Convenient Specialty Magnets for Shop or Home

MW-1 MagWand

MSP-24 MagSweep MS-1 - magnet with telescoping shaft

The 22” MagWand can pick up to 12 lbs. of swarf in a pass for a cleaner, safer workshop. It rolls easily over the work The MagSweep is the “bigger picker-upper” surface and a hard industrial polymer guard has a powerful magnet that sweeps a 24" wide MBT - magnet “dumps” the waste with a simple pull on swath inside on shop floors or outside in parking with bendable shaft the sliding magnetic insert. Fast, efficient - a lots. A simple pull on a waist-high level handle great devise for welding and machine shops. dumps the payload. Large wheels for easy rolling.

MBC - Magnetic Belt Clip

Handy magnetic tool is ideal for retrieving iron objects from hard to reach spot where your fingers just can’t reach.

CATALOG MPU - Magnetic NUMBER DESCRIPTION Pick-Up MS-1 MAGSTIK (single item) MBT MAGBEND-IT (single item) MBC BELTMAG CLIP (single item) MW-1 MAGWAND MPU- Magnetic pick-up tool on a 35” tubular Magnetic Clip conveniently clips to your belt to MPU-1 MAGPICK-UP PAL (single item) handle is ideal for clean-up without the usual “pain- prevent awkward (and painful) fumbling in your 14 MSP-24 MAGSWEEP in-the-back”. pocket or pouch for screws, nails, etc. Bessey Claw Clamp Bessey Variable The Bessey Claw Clamp is ideal for clamping (or spreading) in tight spaces Angle Device • Spindle mechanism can be positioned (VAD Pad) outside working area ... for use on small projecting surfaces and confined spaces. • With stop-screw removed, sliding arm can be reinstalled upside-down for use as a spreader (requires optional CLS shoe).

CAT.NO.DESCRIPTION VAD SET OF TWO

NOMINAL NOMINAL • High-grade sheet steel, electro-galvanized • Floating pads tilt 60° inward or outward - CATALOG NOMINAL THROAT CLAMPING sliding arm, can be positioned anywhere ideal for clamping or aligning round, oval NUMBER OPENING DEPTH PRESSURE on rail, max. swivelling distance 26 mm. and angular pieces CL-12 12" 4" 1775 LBS. • High-grade cast pressure plate ... swivels • Assembly is easy to install and remove ... CL-24 24" 4" 1775 LBS. up to 30°. swivels 360° or can be fixed CL-40 40" 4" 1775 LBS. • Oversized spindle, nuts and bearing pins ... CLS SHOE for high strength, durability and long life. • Fits up to 2400 series clamps Bessey High Bessey Bessey Deep Pressure Clamp T-Bar Clamps Reach Pipe Clamp with Morpad

• Fast, easy adjustment of movable jaw - 8500 lb. clamping pressure for construction simply slide to work piece, locate jaw at job sites, bridge work, boiler makers, etc. closest convenient hole in rail, and lock jaw in position with clamping pin. • Safety wedge for additional locking • Holds pipe in alignment for welding pressure on sliding arm • Sliding and adjustable jaws are malleable cast iron ... “T” section • Jaws & clamp arms are made from • Morpad tilts 35° rail is steel malleable iron • Hex head spindle • Fits pipe from 4" to 16" O.D. NOMINAL NOMINAL NOMINAL NOMINAL CATALOG NOMINAL THROAT CLAMPING NOMINAL CATALOG MIN.MAX.THROAT CATALOG NOMINAL THROAT CLAMPING NUMBER OPENING DEPTH PRESSURE RAIL SIZE NUMBER PIPE PIPE DEPTH NUMBER OPENING DEPTH PRESSURE BT-36 39" 2" 3990 LBS.2" X 2" PC4-7 4" 71/2"4" 8500HPC-6 6" 4" 8500 LBS. BT-70 70" 2" 3990 LBS.2" X 2" PC4-10 4" 10" 51/4" 8500HPC-10 10" 4" 8500 LBS. BT-96 98" 2" 3330 LBS.2" X 2". 8500HPC-14 14" 4" 8500 LBS. PC4-16 4" 16" 10" BT-120 120" 2" 2660 LBS.2" X 2" 15 Bessey Jig Bessey Claw Bessey Hold Down & Fixture Clamp Machine Clamp Table Clamps

• Secure clamping on any flat surface with • Cantilever jaw for clamping in tight space Vibration proof, ratchet action mechanism is appropriate hole ... 360° rotation with screw positioned outside of work area fast and secure. Ideal for milling or drilling on • Two position bushing assembly - use in • Full rotation through 360° radius for easy machines equipped with “T” slots. Clamp either a fixed or rotating position set-up and positioning outside of work area swivels and has a quick release button to 13 instantly release pressure. • Comes with 1 ⁄16" round bushing

NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL CATALOG THROAT NOMINAL CLAMPING CATALOG NOMINAL THROAT CLAMPING CATALOG THROAT NOMINAL CLAMPING NUMBER DEPTH OPENING PRESSURE NUMBER OPENING DEPTH PRESSURE NUMBER DEPTH OPENING PRESSURE 1 3 1200HD-9 4 /4" 8" 1220 LBS. 1 MCL-8 8" 5 /4" 1760 LBS. FC24-8 8" 4 /2" 2660 LBS. 2400HD-10 41/2" 10" 2220 LBS. Bessey C-Clamps Regular Duty Heavy Duty Drop- Malleable C-Clamp Forged C-Clamp

NOMINAL • Drop-forged heat-treated steel frame, CATALOG NOMINAL THROAT LOAD swivel pad NUMBER OPENING DEPTH LIMIT • Choice of spindle and pads: black oxide CM23DR 2" 31/2" 400 LBS. coated to resist corrosion or copper CM34DR 4" 41/2" 500 LBS. coated to resist weld spatter CM10 1" 1" 400 LBS.

CM13 1" 3" 400 LBS.

CM15 11/2"31/2" 400 LBS. BLACK COPPER NOMINAL BESSEY OXIDE COATED NOMINAL THROAT LOAD SCREW CM20 2" 11/2" 400 LBS. SPINDLE SPINDLE OPENING DEPTH TEST DIAMETER

CDF402 CDF402C 2" 2" 3500 LBS. 1/2" CM22 21/2"13/8" 600 LBS.

CDF403 CDF403C 3" 23/8" 3500 LBS. 1/2" CM25 21/2"21/2" 600 LBS. 3 3 CM30 3" 2" 800 LBS. CDF404 CDF404C 4" 2 /4" 6200 LBS. /4" 5 3 CM40 4" 3" 1200 LBS. CDF406 CDF406C 6" 3 /8" 6900 LBS. /4"

CDF408 CDF408C 8" 41/2" 6900 LBS. 3/4" CM50 5" 31/4" 1200 LBS.

CDF410 CDF410C 10" 53/8" 8000 LBS. 3/4" CM60 6" 31/2" 1200 LBS. 3 3 CM80 8" 4" 1200 LBS. CDF412 CDF412C 12" 5 /4" 9300 LBS. /4" 16 RiteHite Self Positioning Hold Down Clamping System

• Self-positioning, single component design T-SLOT A CCESSORIES • Swivel rocker attached body - prevents loss T-Slot Nuts • Instant set-up - AND eliminates shim stock • Hardened machine surfaces will not damage underside of T-slot • Wide clamping range- instant adjustment to 5" • Morton T-slot nuts are NOT threaded through to eliminate risk of screwing stud through the nut and damaging the table slot • Strong, ductile iron body

ABCDEFCATALOG THREAD CATALOG THREAD TABLE NUMBER SIZE MAX.MAX.LOAD NUMBER SIZE SLOT SIZE CATALOG STUD CLAMPING NOMINAL LIMIT 36" HEAT-TREATED THREADED 3 7 1 11 7 NUMBER SIZE HEIGHT DIMENSIONS LBS. 716TN /8-16 /16 /2 7/32 /16 /8 ROD 3 1 1 9 7 7 12TN /8-16 /2 /2 /32 /8 /8 3 375HSTS /8-16 3 9 5 11 7 1 ITE ITE ODEL ONG EACH 8 16 8 32 8 8 R H M L - L R 916TN / -16 / / / / 1 / 1 1 9 5 11 7 1 500HSTS /2-13 3 1 1 1 916TN1 /2-13 /16 /8 /32 /8 1 /8 375L /8"1/4"1/8" X 3 /2" 8,000 1 5 5 11 1 5 58TN /2-13 /8 /8 /32 11/8 625HSTS /8-11 1 1 7 3 500L /2"2/2"1/16" X 5 /4" 10,500 1 5 3 3 1 1 3 58TN1 /2-13 /8 /4 /8 1 /8 1 /8 750HSTS /4-10 5 1 7 3 1 11 3 7 1 1 8 2 8 4 1116TN /2-13 /16 /4 /16 /8 1 /4 7 625L / "3/ "1/ " X 6 / " 18,000 8 5 11 3 7 1 1 875HSTS / -9 3 1 1116TN1 /8-11 /16 /4 /16 1 /8 1 /4 4 8 750L / "5"2/ " X 9" 24,000 5 3 3 15 1 1 1000HSTS 1-8 34TN /8-11 /4 /4 /32 1 /4 1 /4 7 1 8 8 5 13 9 1 1 1000L 1" 5" 2 / " X 11 / " 65,000 1316TN /8-11 /16 1 /16 1 /4 1 /2 3 13 9 1 1 HARDENED STEEL FLANGE NUTS 1316TN1 /4-10 /16 1 /16 1 /8 1 /2 RITEHITE MODEL S - SHORT REACH (closer set-ups) 3 7 9 1 1 3 78TN /4-10 /8 1 /16 1 /2 1 /2 375FN /8-16 3 1 3 5 5 3 376S /8"1"1/8" X 3" 10,000 1000TN /4-10 1 1 /8 1 /8 1 /4 1 2 3 1 3 3 3 500FN / -13 1 3 3 1 1000TN1 /4-10 1 1 /2 /4 1 /4 1 /4 501S /2"1/4"1/8" X 4 /4" 16,800 5 3 1 1 11 5 625FN /8-11 10116TN /4-10 1 /16 1 /8 /16 1 /8 2 5 3 7 1 626S /8"2/4"1/8" X 5 /2" 24,000 7 5 5 3 3 1000TN2 /8-9 1 1 /8 1 /8 1 /4 750FN /4-10 3 1 7 1 1 11 5 7 751S /4"3/2" 2" X 7" 35,000 10116TN2 /8-9 1 /16 1 /8 /16 1 /8 2 875FN /8-9 7 1 1 3 3 7 1018TN1 /8-9 1 /8 1 /2 /4 1 /4 2 8 1000FN 1-8 1001S 1" 3" 2 / " X 9" 80,000 1 1 11 5 10116TN1 1-8 1 /16 1 /8 /16 1 /8 2 1 1 3 3 1018TN 1-8 1 /8 1 /2 /4 1 /4 2 Jamacc Quick Set Hold Down Clamping System

CAT.FOR NOM.NOM NOM.NOM. NO.BOLTS LENGTH WIDTH HEIGHT.THICKNESS

QUICK SET BLOCKS SB-82 2" SB-83 3" SB-84 4" QUICK SET STRAPS

5 7 PS-876 /8"- /8"6"2" 1"

3 3 9 S-100 /4"-1" 10" 2 /4"1/16" Quick Set Hardened Straps: drop forged OR cold-drawn, heat-treated straps

3 3 9 S-1000 /4"-1" 14" 2 /4"1/16" Quick Set Blocks: drilled and riveted at one end – individual leaves rotate independently to match 1 clamping height (leaf thickness approx. /8") QUICK SET WASHERS 3 5 1 3 Quick Set Heavy Duty Washers: /8" thick, 2 /8" OD – matched to Quick Set System W-500 /2" /8" 5 3 Quick Set Kits W-625 /8" /8" EGULAR UTY 3 3 R D QS-16: 6 Blocks (2 each of SB-82, SB-83, SB-84), W-750 /4" /8" 2 Drop Forged Straps (PS-876) 8 Washers (2 each of W500, W625, W750, W875) 7 3 W-875 /8" /8" HEAVY DUTY HQS-20: 12 Blocks (4 each of SB-82, SB-83, SB-84) 3 W-1000 1" /8" 2 Heavy Duty 14" Straps (S-1000),12 Washers (4 each of W750, W875, W1000) 17 ® Unique cantilever clamp with floating jaws Kant-Twist Clamps that always stay parallel – built-in “V” X4 Torque Multiplier block to hold round stock – copper plated The Morton X-4 Torque Multiplier is a geared jaws and screws resist weld spatter. head devise that offers 4 times the power of an Kant-Twist® Welders’ Ground ordinary torque wrench. It is an invaluable tool • Full 4.5" opening can be used as a clamp for maintenance, production, inspection or and ground at the same time equipment service where you need the raw • Brass terminal grounds up to 400 amps power but compressed air is not accessible. • Heavy duty construction for high pressure and secure grounding Stainless Steel Kant-Twist® • for use where corrosion and magnetism are a problem Kant-Twist® Weaver Grip • Comfort grip - max. pressure/less effort • Easy to tap on and off • High quality ABS plastic for durability

NOMINAL CATALOG OPENING ACLAMPING NUMBER MAX.MIN.B C DPRESSURE ORIGINAL KANT-TWIST® 3 3 3 3 1 /4 /4" 0" /8" /8" /4" 200 LBS.

1 1 1 5 11 /16"0" /2" /2" /16" 300 LBS.

1 1 1 22"0"1 /8"1 /4" /2" 700 LBS.

1 7 13 1 2 /2D (DEEP THROAT)2/16"0"2"1/16" /2" 700 LBS.

1 3 1 33"0"1 /4"1 /4" /2" 1500 LBS.

1 1 1 1 7 4 /2D (DEEP THROAT)4 /2"0"2 /4"2 /2" /8" 1500 LBS.

1 3 7 66"0"2 /8"3 /8" /8" 1800 LBS.

5 1 7 6D (DEEP THROAT)6"0"4 /8"5 /2" /8" 1800 LBS.

1 1 7 6D3J (DEEP THROAT/3 JAW)6"0"4 /2"5 /2" /8" 1800 LBS.

3 1 1 99"0"3 /8"5 /4"1/4" 3500 LBS. Only available in Canada

1 1 10D (DEEP THROAT) 10" 0" 6" 7 /2"1/4" 3500 LBS.

1 12 12" 2" 5" 7" 1 /4" 6000 LBS. • Develops up to 12,000 ft.lbs.of torque STAINLESS STEEL KANT-TWIST® • Compact design for use in tight spaces 1 1 1 2-SS 2" 0" 1 /8"1 /4" /2" 700 LBS. • Does NOT require air or electricity 1 3 1 3-SS 3" 0" 1 /4"1 /4" /2" 1500 LBS. 1 1 1 1 7 • Can be used with a torque wrench for 4 /2D-SS (DEEP THROAT)4 /2"0"2 /4"2 /2" /8" 1500 LBS. precision KANT-TWIST® WELDERS’ GROUND • High grade alloy steel component – 1 1 1 1 400A-1J 4 /2"0"2/2"2/2"1/2" 1700 LBS. maximum strength and service life • More than one torque multiplier can be CATALOG APPROX. LEGEND FOR CHART ABOVE directly stacked to provide high mechanical NUMBER FOR MODELS ... DIAMETER LENGTH ratio KANT-TWIST® WEAVER GRIP ANTI-BACKLASH TORQUE MULTIPLIER 1 1 1 WG 1 /2"1/2" 1 1 1 • For use where there's risk of “spring back” 2 WG 2, 2 /2, 2SS 1 /16"2/2" 1 1 7 or where an extended reaction bar is used 3 WG 3,3F, 3FT, 4 /2D, 3SS, 4 /2DSS /8"4"

1 6 WG 6, 6D, 6F, 6FT 1 /8"5" • Can be coupled with larger model to make entire system anti-backlash Kant-Twist® “T” Slot and Fixture Clamps • Cantilever action clamps parallel to surface INPUT OUTPUT • Unique design -work won't shift CAPACITY CAPACITY INPUT OUTPUT • Quick release handle for quick set-up CAT.NO.(FT.LBS.) (FT.LBS.) DRIVE DRIVE RATIO • Unobstructed clearance when milling/ drilling JAMES MORTON X4 TORQUE MULTIPLIER 1 3 JM-750 250 1000 /2" /4" 4:1 3 NOMINAL JM-1000 500 2000 /4" 1" 4:1 CATALOG NOMINAL CLAMPING 3 1 NUMBER OPENING PRESSURE JM-1200 209 3000 /4"1/2" 14.3:1 1 5 JM-1500 923 4000 1" 1 /2" 4.33:1 3F (FIXTURE) 0-2 /8" 1500 LBS. 1 5 JM-2000 1739 8000 1" 1 /2" 4.6:1 3FT (T-SLOT) W/BOLT 0-2 /8" 1500 LBS. 1 JM-2500 2000 12000 1" 2 /2" 6:1 6F (FIXTURE) 0-6" 3200 LBS.

3 3 JAMES MORTON X4 ANTI-BACKLASH TORQUE MULTIPLIER 6FT (T-SLOT) W/BOLT /8"-6 /8" 3200 LBS. 3 18 JM-1000-R 500 2000 /4" 1" 4:1 Industrial Hammers

Screw-on Tip Hammers CATALOG NUMBER HEAD HEAD HANDLE SCREW-ON TIPS • Meets GGG-H-33A US Government Specs WOOD FIBERGLASS DIAMETER LENGTH LENGTH Fit Hammers .... • Hammer supplied with zinc head (holder) SCREW-ON TIP HANDLE/HOLDER #771 #773 #775 1 ... tips sold separately 771W 771F 1" 3 /2" 11" CATALOG NUMBERS DESCRIP’N (Color) MAT’L 1 1 36G 46G 57G TOUGH (GREEN)VINYL • Color coded replaceable tips in 5 773W 773F 1 /2"4 /2" 12" 36 46R 57R MEDIUM (RED)VINYL hardnesses; interchangeable with most 775W 775F 2" 5" 13" 36BR 46BR 57BR SOFT (BROWN)VINYL other national brands PRESS-ON TIP HAMMERS 5 1 36CR 46CR 57CR MED.HARD (CREAM) NYLON 700W 700F /8"2 /4"8" Press-on Tip Hammers 3 1 36BL 46BL 57BL HARD (BLACK) NYLON 701W 701F /4"2 /2" 10" • Meets GGG-H-33A US Government Specs 7 703W 703F /8" 3" 11" • Precision balanced steel head with 1 705W 705F 1" 3 /4" 11" replaceable, tough urethane tips 1 1 Mor-Head 707W 707F 1 /4"3 /4" 13" • Add “1” to hammer number when 3 1 709W 709F 1 /8"4 /8" 13" Industrial Hammers ordering tip only 1 717W 717F 1 /2" 4" 13" Jamacc “Big Orange” Hammers 723W 723F 2" 4" 13" ... feature powerful driving force with a • Virtually indestructible, non-marring JAMACC “BIG ORANGE”HAMMERS unique face that yields to struck surface 5 1 urethane head – absorbs shock, won’t 790 1 /8"2/2" 10" on contact. Steel shank handles have 7 1 1 mushroom or split, non-sparking 791 1 /8"3/4"10/2" synthetic rubber grips that are comfortable, 5 7 1 Brass Hammers 792 2 /16"3/8"12/2" contoured, non-slip and safe. Handles and 3 5 1 • Meets GGG-H-33A US Government Specs 793 2 /4"4/8"12/2" heads are replaceable for cost savings. • High purity brass head; long life; BRASS HAMMERS 7 13 Mor-Head Soft Alloy Tapping Hammer non-sparking; non-magnetic B750W B750F /8"1/16" 11" 9 B751W B751F 1" 2 /16" 12" • 1/2 pound head for tapping Copper Hammers 1 1 B752W B752F 1 /4"3/4" 13" • Dense, wear-resistant, ductile alloy is • Meets GGG-H-33A US Government Specs 1 3 B753W B753F 1 /2"3/4" 14" non-destructive • 99.9% pure copper head for long life – 3 1 B754W B754F 1 /4"4/4" 15" non-sparking and non-magnetic 7 3 Mor-Head Soft Alloy Hammers B755W B755F 1 /8"3/4" 15" 3 • Variety of weights for light to medium duty Lead Hammers B7510W B7510F 2" 6 /4" 21" impacts • Meets GGG-H-33A US Government Specs COPPER HAMMERS 7 13 • Genuine 4% antimonium lead C760W C760F /8"1/16" 11" • Dense, wear-resistant, non-destructive 5 • Black oxided steel tubing handle for long C761W C761F 1" 2 /8" 12" ductile alloy 1 5 life — won’t crack or break C762W C762F 1 /4"3/16" 13" 1 3 Mor-Head Soft Alloy Sledge Hammer • Vinyl grip – more comfort, less fatigue C763W C763F 1 /2"3/4" 14" 3 1 • Molded-in “Plus-lok pin” holds head C764W C764F 1 /4"4/4" 15" • For heavy duty impacts 7 3 secure C765W C765F 1 /8"3/4" 15" • Dense, wear-resistant, ductile alloy is 3 Dead Blow Hammers C7610W C7610F 2" 6 /4" 21" non-destructive Shot-loaded head: 30% more force, no recoil LEAD HAMMERS 3 5 Mor-Head Brass Hammers • Compound head – lamination won't L731(steel tube handle) /4"2/8"9" 1 5 breakdown or "mushroom"; heat resistant L732 (steel tube handle) 1 /8"2/8" 10" • Variety of weights for light to medium duty 9 1 impacts – outlasts metal and rawhide by as much L733 (steel tube handle) 1 /16"3/8" 10" 5 3 as 20 times – non-sparking L735 (steel tube handle) 1 /8"3/4" 10" • Non-destructive, wear resistant brass • extruded fiberglass handle (less breakage, JAMACC DEAD BLOW HAMMERS 1 Mor-Head Brass Sledge Hammer SF-1 1 /2" 11" less vibration, less fatigue) ... non-slip 9 lb. head for heavy duty impacts ribbed grip SF-2 2" 12" 3 SF-3 2 /8" 12" • Non-destructive, wear resistant yellow brass 3 SF-4 2 /4" 13"

19 Mor-Head Hand Maul •Contoured shape fits hand for secure use Alvin Specialty Compounds •Head-only shaped for use in confined spaces •Soft alloy head and plastic tip end Lab-metal®... the original ready-to-use metal putty Mor-Head Plastic Faced Hammer • Spreads right from the can – NO mixing – • Replaceable, durable, soft-contact plastic tip hardens quickly to metal! • Single and double-sided plastic tip • Can be drilled, tapped, ground, machined, chiselled, milled ... sanded to a feathered edge Mor-Head Replacement Handles • Withstands heat up to 350°F/177°C • Steel shank handles are strong and • Aluminum filled compound – impervious to indestructible petroleum products •Synthetic rubber grips are comfortable, • Bonds to most clean, dry surfaces ...metal, contoured, non-slip and safe wood, plastic, glass, porcelain etc. •Bolt on head mounts for easy replacement Hi-Temp Lab-metal • Same performance as regular Lab-metal ... but Mor-Head Replacement Tips withstands heat up to 1000°F/538° C (after • Soft contact – but tough for long life curing at 425°F/218°C for one hour) • Repairs manifolds, core boxes, castings, etc.

HAMMER HEAD ONLY HANDLE ONLY Lab-solvent CAT.NO.CAT.NO.DIMENSION CAT.NO.LENGTH • Surface-prep for regular & Hi-Temp Lab-metal MOR-HEAD SOFT ALLOY TAPPING HAMMER

1 • Thins Lab-metal for brushing or spraying SHD-1 SHD-1H 3" X 1 /2" H-905 11"

1 5 • Leaves no film and does not corrode SHD-2 SHD-2H 3 /4 "X 1 /8" H-905 11"

7 SHD-3 SHD-3H 3 /8" X 2" H-905 11" • Capful in Lab-metal after each use stops

3 3 hardening in the can SHD-4 SHD-4H 4 /4" X 2 /8" H-905 11"

3 SHD-5 SHD-5H 5" X 2 /8" H-905 11" Telcon ... mold release and dry lubricant MOR-HEAD SOFT ALLOY LIGHT/MEDIUM DUTY HAMMER • Coats and lubricates with clean, tough, oil-free 1 SHT-1 SHT-H 2 /4" X 1" SHT-L 7" semi-transparent shield MOR-HEAD SOFT ALLOY SLEDGE HAMMER Made in the USA ... Alvin Products for metal • Apply to metal, wood, plastic, glass and 1 SLG-10 SLG-H 6 /2" X 3" SLG-L 30" work can be just the right answer for tough rubber—anywhere sticking is a problem MOR-HEAD BRASS HAMMER jobs around the plant or shop. • Telcon resists temperatures to 500°F, repels 1 BHD-1 BHD-1H 3 X 1 /2" H-905 11" water and oil and will not collect dust or dirt

1 5 BHD-2 BHD-2H 3 /4 X 1 /8" H-905 11" CATALOG UNIT UNITS • Choose methylene chloride or water dispersion 7 BHD-3 BHD-3H 3 /8 X 2" H-905 11" NUMBER SIZE PER CASE formulas

3 3 BHD-4 BHD-4H 4 /4 X 2 /8" H-905 11" ® • high solids content for better film thickness 3 LAB-METAL BHD-5 BHD-5H 5 X 2 /8" H-905 11" and strength LM-06 6 OZ. (170 G)12 MOR-HEAD BRASS SLEDGE HAMMER • Contains a Teflon®-like active ingredient to LM-12 12 OZ. (340G)12 1 1 BHD-9 BHD-9H 6 /2" X2 /2" SLG-L 30" reduce friction and help machine parts run LM-24 24 OZ. (680 G)12 MOR-HEAD HAND MAUL efficiently for longer service life LM-48 48 OZ. (1.4 KG)12 HM-4 LM-128 1 GALLON (3.8 L) 2 MOR-HEAD PLASTIC FACED HAMMERS LM-512 5 GALLON (18.9 L) 1 SSMH Plastic faced hammer with double head containing one side plastic and one side “soft alloy” tip ® DSMH Plastic faced hammer with double head containing HI-TEMP LAB-METAL two plastic tips HT-14 14 OZ. (397 G)12 MOR-HEAD PLASTIC FACED HAMMER TIPS HT-24 24 OZ. (680 G)12 HMT Plastic tips for SSMH, DSMH, HM-4 LAB-SOLVENT Handles LS-16 16 OZ. (473 ML)12 LS-128 1 GALLON (3.8 L) 2 Most of our industrial LS-512 5 GALLON (18.9 L) 1 hammers are available Heat Block ... heat absorbing, insulating paste with your choice of TELCON handles TC-11 11 OZ. (325 ML aerosol) 12 • Insulates against heat transfer during welding, soldering brazing or other heat treatment • strong second-growth METHYLENE CHLORIDE DISPERSION TCM-128 1 GALLON (3.8 L) 2 • Protect closely soldered parts, valve gasketing, hickory for economy thin gauge metal, and other materials which TCM-512 5 GALLON (18.9 L) 1 • extruded fiberglass could be damaged during repair or installation WATER DISPERSION for less breakage, • Protect wire insulation when soldering and to TCW-128 1 GALLON (3.8 L) 2 vibration and protect plastic drain pipes in close proximity to TCW-512 5 GALLON (18.9 L) 1 fatigue metal pipes being replaced and soldered • Prevents distortion to light metals, protects HEAT BLOCK Refer to rubber and plastic components and protects spec charts HB-PNT 1 PINT (.47L) 12 painted or finished surfaces during adjacent for availability HB-QRT 1 QUART. (.95L) 12 soldering, brazing or welding HB-01G 1 GALLON (3.8 L) 2 • Non-toxic and is easily applied direct from 20 HB-05G 5 GALLON (18.9 L) 1 container Bessey Cutting Technology COMPOUND LEVERAGE SNIPS Powerful, Compact, Practical

and Efficient ...Less Effort and Fatigue 8 1. Drop forged cutter heads, fully heat treated. Cutting blades are induction hardened. Blades of heavy duty snips made of high speed steel. 7 2. Adjustable pivot joint 3. Integrated internal steel spring opens snips automatically 4. Compound leverage for improved cutting performance 6 5. Strong torsion resistant steel handles, bright nickel plated. Aviation Snips 6. Reliable locking catch 7. Ergonomically designed, plastic coated handles with 5 •Cuts angles, curves, circles or straight slip guard. user-friendly soft plastic inlay. 3 • Cutter heads - Drop forged and fully heat 8. Flex ring for storage ... also prevents pinching treated 2 injuries • Produced to precise European standards 4 • Compound leverage for twice the result 1 • Finely serrated jaws to cut work without slipping • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands • Cuts up to 18 gauge (.05”/1.2 mm) steel 1 7 • Length 9 /2", Cutting edge 1 /16"

CAT.NO. 16S-BE - YELLOW GRIP: CUTS STRAIGHT CAT.NO. 16-BE - GREEN GRIP: CUTS RIGHT CAT.NO. 16L-BE - RED GRIP: CUTS LEFT

Offset Snips - TIN Special Hard Cutting Snips • Made of HSS steel for superior durability • Special High Grade Steel cutting blade • Cutter heads - Drop forged and fully heat • For short straight and curved cuts treated • Cutter heads - Drop forged and fully heat • “Double hard” blades - Drop forged and treated induction hardened • “Soft-touch” handles - textured with a soft Offset Snips - Long Cuts • Titanium coated cutter head - Extra hard plastic insert to minimize pressure on hands • Cuts up to 18 gauge (.05”/1.2 mm) steel • Specifically for long straight/curved/angle cuts • “Soft-touch” handles - textured with a soft 1 7 • Cutter heads - Drop forged and fully heat • Length 10 /4", Cutting edge 1 /16" plastic insert to minimize pressure on hands treated • Made for long, straight or curved cuts CAT.NO. D29SS-BE - CUTS RIGHT • Produced to precise European standards • Cuts up to 16 gauge (.07”/1.8 mm) steel • Compound leverage for twice the result 1 5 CAT.NO. D29SSL-BE - CUTS LEFT • Length 10 /4", Cutting edge 1 /16" • Finely serrated jaws to cut work without slipping CAT. No. D27AH-TIN-BE - CUTS RIGHT/STRAIGHT • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands CAT. No. D27AHL-TIN-BE - CUTS LEFT/STRAIGHT • Cuts up to 18 gauge (.05”/1.2 mm) steel 1 1 • Length 9 /2", Cutting edge 1 /8"

CAT.NO. 16A-BE - CUTS RIGHT New Generation Offset Snips CAT.NO. 16AL-BE - CUTS LEFT • optimized combination of blade design and leverage • Requires 25% less effort than most compound Offset Snips - Premium snips • Made of HSS steel for superior durability • Made for long, straight or curved cuts • Cutter heads - Drop forged and fully heat • Special High Grade Steel cutting blade treated • Cutter heads - Drop forged and fully heat • “Double hard” blades - Drop forged and treated Offset Snips - Short Cuts induction hardened • “Soft-touch” handles - textured with a soft plastic insert to minimize pressure on hands • Specifically for short straight/curved/angle cuts • “Soft-touch” handles - textured with a soft • Cutter heads - Drop forged and fully heat plastic insert to minimize pressure on hands • Cuts up to 18 gauge (.05”/1.2 mm) steel 1 3 treated • Length 10 /4", Cutting edge 1 /8" • Made for long, straight or curved cuts • Produced to precise European standards • Cuts up to 16 gauge (.07”/1.8 mm) steel AT O CUTS RIGHT • Compound leverage for twice the result 1 5 C .N . D29ASS-BE - • Length 10 /4", Cutting edge 1 /16" CAT.NO. D29ASSL-BE - CUTS LEFT • Finely serrated jaws to cut work without slipping CAT.NO. D27AH-BE - CUTS RIGHT • Cuts up to 18 gauge (.05”/1.2 mm) steel 1 1 CAT.NO. D27AHL-BE - CUTS LEFT • Length 9 /2", Cutting edge 1 /8" CAT.NO. D08-BE - CUTS RIGHT CAT.NO. D08L-BE - CUTS LEFT 21 MultiPurpose Cutters

Long Nose, All Purpose, Offset Cable Cutters • Stainless steel, drop forged, heat treated cutter • Cuts up to .25”/10 mm multi-core cables head Combinox® • Compound leverage • Stainless steel blades • Multi-purpose, mid-size, straight cut for sheet • 3" cutting blades for further reach • Spring, open cutters automatically metal, carpet, textiles, paper, cardboard, • Adjustable screw point • Reliable locking catch, easily operated with the plastics, wire cable and other material • Available in left cutting version only thumb • Notched blade for wire-stripping 1 • For cutting lighter gauge sheet metal, mesh, etc. • Length 6 /4" • Ergonomically designed non-slip plastic handles • Cuts up to 18 gauge (.05”/1.2 mm) steel • Stainless Steel blades CAT.NO. D49-BE • Length 11", Cutting edge 3" • Reliable thumb-operated locking catch CAT.NO. D22AL-BE • Handle eyelet for hanging and storage 1 3 • Length 7 /2", Cutting edge 1 /8" Special Purpose Snips CAT.NO. D50-BE Electrician’s Wire Cutters • Regular-duty, serrated, nickel plated blades • Wire cutting notch 1 •Length 5 /2"

CAT.NO. D57A MultiSnip Master Strap Cutter • Cutter head made of stainless steel • Made from special High Grade Steel • Cuts many materials of medium thickness and • Drop forged cutter head hardness Electrician’s Scissors • Blades designed to safely hold strapping • Ideal for long, straight cuts and wide radii • Compound leverage for twice the results • Adjustable pivot screw • Light-duty, serrated, nickel plated blades • Cuts up to 18 gauge (.05”/1.2 mm) steel up to • Laterally displaced, angled cutting blades keep • Wire-stripping grooves 1” wide hands clear during cutting • Length 5" 1 5 • Length 10 /4", Cutting edge 1 /16" • Ergonomically designed plastic handles • Spring opens cutter automatically CAT.NO. D53A CAT.NO. D122S-BE • Reliable locking catch, easily operated with the thumb 1 1 • Length 7 /2", Cutting edge 1 /2" Industrial and CATALOG NUMBER D51A-BE Professional Shears • Heavy duty shears with stainless steel blades • Offset, black laquered handles, extended finger grip CATALOG NUMBER LENGTH D860-200-BE 8" D860-225-BE 9" Nibbler D860-250-BE 10" D860-300-BE 12" • Clean burr-free edges • Nickle-plated handles • Replacement blades available • Cuts up to 23 gauge (.03”/0.8 mm) sheet metal 1 • Length 10 /2" TM CAT.NO. D23-BE MultiSnips • Cutter head made of stainless steel • Universal all purpose snip cuts wide range of Straight Pattern Tin Snips material • Designed for long straight and wide curved cuts • Ergonomically designed plastic handles • High grade steel to ensure long life • Spring opens cutter automatically • Drop forged to hold an edge • Reliable locking catch, easily operated with the • Soft coated handles thumb • Cuts up to 20 gauge (.04”/1.0 mm) sheet metal

CATALOG CUTTING BLADE CATALOG NUMBER LENGTH CUTTING EDGE

NUMBER LENGTH EDGE STYLE 1 D146-200-BE 8" 1 /8" 1 3 D47-BE 5 /2"1/16"STRAIGHT D146-250-BE 10" 2" 1 9 2 16 TRAIGHT 1 D48-BE 7 / "1/ "S D146-300-BE 12" 2 /2" 1 1 2 2 FFSET 7 D48A-BE 7 / "1/ "O D146-350-BE 14" 2 /8" 22 Reco Induction Bearing Heaters • easy to use and ready in minutes – mount SC110D Model bearing quickly ... reduce downtime • eliminates hammering and pounding to cold-mount bearings ... extends bearing BESSEY & SOHN GMBH & CO.,a life and cuts operating costs German family-owned • works on bearings, sprockets, gears, company, was founded in couplings, sleeves ... increases productivity 1889. Internationally recognized as a • no more open flames, torches or open oil world-class steel maker, the company baths for heating ... reduces risk to first introduced their line of malleable operator cast iron bar clamps in 1936 and heat- • comes with three standard cross bars ... treated, all-steel clamps in 1952. Bessey wide size range of bearing application has grown to the largest clamp • Reco bearing heaters also demagnitize manufacturer in the world, distributing bearings some 1300 different clamping tools in 90 Induction technology countries worldwide. means bearing does SC110D (110V or 220V models) not need to physically Bessey cutting technolgies represent a 3 touch crossbar for • Capacity: bearings up to 4 /8" wide x 11" O.D. tradition in the manufacture of tin snips (or 14" OD with optional raising blocks) heating to occur. going back more than seventy years. • computer chip monitors and stabilizes temperature In innovative engineering, industry • pre-set times and temeratures, lighted display leading design and impeccable panel, visible read-outs & auto shut off standards of manufacturing in both clamping and cutting technology ... SC (110V or 220V models) nobody does it like Bessey!

3 • Capacity: bearings up to 4 /8" wide x 11" O.D. (or 14" OD with optional raising blocks)

BC (220V, 440V or 550V models) • Capacity: bearings up to 8" wide x 22" O.D. (or 32" O.D. with optional raising blocks)

BC Special (220V, 440V or 550V models)

1 • Capacity: bearings up to 12 /4" wide x 22" O.D. BEARING HEATER DIMENSIONS (or 32" O.D. with optional raising blocks) Cat. No. A B C D E F

3 5 3 3 1 SC 4 /8"3 /8" /4" /4"9 /4"9"

1 1 3 BC 8" 7" 1 /4"1/4" 14 /4" 16" Raising Blocks 1 1 1 3 BC Special 12 /4"7"1/4"1/4" 18 /4" 16" Raising blocks (sold in pairs) lift bearing heater crossbar for use with larger diameter bearings.

STANDARD OPTIONAL CATALOG NUMBER HEIGHT WIDTH CATALOG CROSS CROSS Bessey Tools 3 5 NUMBER VOLTAGE BARS BARS SCRB (fits SC model) 2 /8"2 /8"

3 1 1 5 SC 110D 110V (17 AMP) /4", 1 /4", 2" /2"* BCRB (fits BC and BC Special models) 5" 3 /8" North America 3 1 1 SC 110 110V (17 AMP) /4", 1 /4", 2" /2"* Pyrometer/ UNITED STATES OF AMERICA 3 1 1 SC 220 220V (9 AMP) /4", 1 /4", 2" /2"* Thermometer P.O.BOX 399, BATAVIA, NY 14021-0399 1 3 with probe and flexible cord BC 220 220V (30 AMP)1/4", 2", 3" /4", 1" PHONE (585) 344-1160 1 3 BC 440 440V (20 AMP)1/4", 2", 3" /4", 1" FAX (585) 344-0025

1 3 BC 550 550V (20 AMP)1/4", 2", 3" /4", 1" TOLL FREE 800-828-1004

1 BCS 220 220V (30 AMP)1/4", 2", 3" 1" * • Multi-purpose heat measuring CANADA 1 tool for bearings, gears, etc. BCS 440 440V (20 AMP)1/4", 2", 3" 1" * P.O.BOX 490, CAMBRIDGE, ON N1R 5V5

1 • Digital readings (Celsius or Fahrenheit) from BCS 550 550V (20 AMP)1/4", 2", 3" 1" * PHONE (519) 621-7240 -50°C (-58°F) to +1300°C (+2000°F) * only available in the USA FAX (519) 621-3442 • Available with flex cord probe for bearings TOLL FREE 800-265-8612 WARNING: DO NOT operate an induction bearing CATALOG heater if you have a heart pace-maker. The strong NUMBER DESCRIPTION www.besseytools.com magnetic field emitted by the heater may affect HH-11 Pyrometer w/probe & flexible cord operation of such devices. THE DESIGNS, SIZES, SPECIFICATION AND SUGGESTED PRICES FOR 5028KW Replacement Probe with handle PRODUCTS IN THIS CATALOG ARE SUBJECT TO CHANGE WITHOUT NOTICE. 23