DOCSLIB.ORG

Kirkintilloch Men's Shed 2015 F. Longrigg a List of Tools and Prices

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Kirkintilloch Men's Shed 2015 F. Longrigg a List of Tools and Prices Kirkintilloch Men's Shed 2015 F. Longrigg A list of tools and prices found useful , which may help other Men's Sheds when they are starting up. Stage 1. Up to £1500 Covering basic woodworking equipment and hand/power tools, with drawings to make 4 benches. List of suppliers for stage 1. Axminster www.axminster.co.uk Call free: 0800 371 822 Mobile-friendly: 03332 406 406 Printed catalogue available Arc Euro Trade www.arceurotrade.co.uk tel: 0116 269 5693 Printed catalogue available Screwfix www.screwfix.com 0500 414141 Printed catalogue available Machine Mart www.machinemart.co.uk Tel: 0115 956 5555 Printed catalogue available Proops Brothers Ltd www.proopsbrothers.com Tel: 0116 240 3400 Printed catalogue available Toolstation www.toolstation.com Tel: 0808 100 7211 Mobile-friendly: 0330 333 3303 Printed catalogue available D&M Tools www.dm-tools.co.uk Tel: 0208 892 3813 Printed catalogue available 1 Supplier Code Page Item Quantity Unit price Total price Toolstation 71429 126 300mm heavy duty quick clamp 1 £8.95 £8.95 Toolstation 63124 126 600mm heavy duty quick clamp 1 £12.20 £12.20 Toolstation 35910 121 Oilstone & box 1 £3.55 £3.55 Toolstation 31968 121 Draper honing guide 1 £5.65 £5.65 Toolstation 16051 122 Hardwood bevel 230mm 1 £6.28 £6.28 Toolstation 14369 122 Bradawl 40mm 1 £11.99 £11.99 Toolstation 22626 107 Draper precision screwdriver set 1 £3.09 £3.09 Toolstation 79939 109 Combination pliers 1 £2.75 £2.75 Toolstation 67586 109 Side cutting pliers 1 £2.38 £2.38 Toolstation 72820 109 Wire stripping pliers 1 £3.87 £3.87 Toolstation 21371 109 Self grip pliers set - 3 piece 1 £8.18 £8.18 Toolstation 70348 119 File set 1 £7.49 £7.49 Toolstation 83084 104 Wooden mallet 1 £5.73 £5.73 Toolstation 15803 122 Combination square 1 £4.97 £4.97 Toolstation 79658 122 Carpenter's pencil - 3 piece set 1 £0.73 £0.73 Toolstation 32979 94 Spirit level 1 £6.75 £6.75 Toolstation 38506 97 Stainless steel rules 150mm 1 £0.86 £0.86 Toolstation 71839 97 Stainless steel rules 300mm 1 £1.44 £1.44 Toolstation 12801 97 Draper tape measure 5m 1 £3.94 £3.94 Toolstation 43014 99 Predator Tenon saw (10”) 1 £8.43 £8.43 Toolstation 52807 98 Hardpoint saw 500mm (20”) 1 £2.95 £2.95 Toolstation 88416 100 Hacksaw 300mm 1 £4.97 £4.97 Toolstation 30695 100 Eclipse junior hacksaw 1 £2.11 £2.11 2 Supplier Code Page Item Quantity Unit price Total price Toolstation 42537 103 Claw hammer 16oz 1 £2.95 £2.95 Toolstation 80643 103 Pin hammer 4oz 1 £2.38 £2.38 Toolstation 46763 105 Draper 8 piece screwdriver set 1 £9.72 £9.72 Toolstation 94859 127 100mm 4” engineer's vice 1 £26.49 £26.49 Toolstation 47230 169 Imperial hex key set 1 £3.04 £3.04 Toolstation 62318 169 Metric hex key set 1 £3.15 £3.15 Toolstation 28746 44 HSS metric drill set 1 £14.55 £14.55 Toolstation 68440 125 Black & Decker workmate 1 £58.00 £58.00 Toolstation 51823 121 Bevel edge chisel set 3 piece 1 £20.59 £20.59 Toolstation 20438 120 250 spoke shave flat 1 £4.12 £4.12 Toolstation 11421 Tape reamer 1 £2.78 £2.78 Toolstation 22457 126 G clamps 50mm 3 £1.45 £4.35 Toolstation 91355 126 G clamps 100mm 3 £3.34 £10.02 Toolstation 21944 120 Hand plane 1 £23.52 £23.52 Proops M0418 47 Drill gauges metric 1 £2.05 £2.05 Proops M0417 47 Drill gauges fraction 1 £2.05 £2.05 Proops M0286 47 Centre finder for round bar 1 £3.10 £3.10 Proops V5089 39 1½” magnifier 1 £2.05 £2.05 Proops X1263 51 5 piece centre drill set 1 £4.75 £4.75 Proops X1154 48 ¾pint oil can 1 £3.80 £3.80 Proops W3083 17 Dividers 10” 1 £4.15 £4.15 Proops Outside calipers 10” 1 £4.15 £4.15 Proops Inside calipers 10” 1 £4.15 £4.15 Proops Divider combined & pencil 1 £9.95 £9.95 3 Supplier Code Page Item Quantity Unit price Total price Arc-Eurotrade 080-060-00300 230V 31 Bench grinder 200mm 8” 1 £73.64 £73.64 Arc-Eurotrade 070-040-00100 31 Diamond grinding wheel dresser 1¾” x ½” #40 1 £8.24 £8.24 Arc-Eurotrade 070-030-00800 30 Diamond mini stone 2” x ¾” 1 £4.07 £4.07 Screwfix 46009 type DP168 230V 204mm bench pillar drill keyed chuck record power 1 £149.99 £149.99 Screwfix 77322 type BASA 1 240V 195mm bandsaw scheppach 1 £169.99 £169.99 Screwfix 24053 type EBS 2504SE 230V 934 Erbauer 250mm table saw 1 £199.99 £199.99 Screwfix 2903F 1 Drill/driver set kit 1 £199.99 £199.99 Screwfix ERB405SDR 928 ⅓ sheet sander. Erbauer 230V 1 £39.99 £39.99 Screwfix 26025 856 Aluminium 1/3 sheet pk10 80 grit 1 £3.99 £3.99 Screwfix 47270 856 Aluminium 1/3 sheet pk10 120 grit 1 £3.99 £3.99 Machine & mart CDR606 24 Drill press vice 150mm 1 £20.39 £20.39 D&M Tools RPWX1000 345 High filtration dust extractor 1 £129.99 £129.99 Axminster 503878 337 3M safety over spectacles. Wear over prescription specs 2 £2.46 £4.92 Axminster 500080 338 Safety visor 1 £10.96 £10.96 Axminster 340439 340 Axminster deluxe ear defenders EN352 standard 1 £6.46 £6.46 Axminster 507075 343 Carpenters' aprons 2 £10.45 £20.90 Axminster 340113 404 Axminster 560 mitre saw 1 £27.96 £27.96 Axminster 501427 335 3M Aura 9322+ disposable respirator exhalation valve - packet of 5 1 £15.96 £15.96 Axminster 505549 395 Axminster Trade Vices quick release carpenter's vice 175mm (7”) 1 £62.95 £62.95 vice TOTAL £1,499.49 4 5 6 7.
Load more

Recommended publications
  • Routers for Router Tables New-Breed Models Spare You the Expense of a Router Lift
    Compliments of Fine Woodworking TOOL TEST Routers for Router Tables New-breed models spare you the expense of a router lift BY ROLAND JOHNSON ABOVE-TABLE ADJUSTMENTS MAKE THE DIFFERENCE A table-mounted router can be very versatile. But it’s important to choose a router that’s designed expressly for that purpose. The best allow both bit-height adjustments and bit changes from above the table. A router that makes you reach underneath for these routine adjustments will quickly become annoying to use. 54 FINE WOODWO R K in G Photo, this page (right): Michael Pekovich outers are among the most versatile tools in the shop—the go-to gear Height adjustment Rwhen you want molded edges on lumber, dadoes in sheet stock, mortises for Crank it up. All the tools for adjusting loose tenons, or multiple curved pieces bit height worked well. Graduated that match a template. dials on the Porter-Cable Routers are no longer just handheld and the Triton are not tools. More and more woodworkers keep very useful. one mounted in a table. That gives more precise control over a variety of work, us- ing bits that otherwise would be too big to use safely. A table allows the use of feather- boards, hold-downs, a miter gauge, and other aids that won’t work with a hand- held router. With a table-mounted router, you can create moldings on large or small stock, make raised panels using large bits, cut sliding dovetails, and much more. Until recently, the best way to marry router and table was with a router lift, an expensive device that holds the router and allows you to change bits and adjust cut- ting height from above the table.
    [Show full text]
  • Matchfit 360 System Workbench Plans Project Overview
    MATCHFIT 360 SYSTEM WORKBENCH PLANS PROJECT OVERVIEW The MATCHFIT 360 System Workbench is an all-in-one multifunctional workbench. Using MATCHFIT Dovetail Clamps and Dovetail Hardware, it allows you to go beyond the edge and clamp anywhere on the surface for hassle-free assembly. TOOLS & MATERIALS - Table Saw - 3/4” MDF, 32”x72” - Router table - 16’ 1-1/2” thick hard maple - 5” wide - MATCHFIT Dovetail Router bit, or comparable - Adjustable Locking Router Guide - free plans HERE 14º, 1/2” diameter dovetail router bit - Vertical Edge Routing Guide - free plans HERE - 1/4” diameter straight router bit - 3/4” diameter forstner bit - 1” diameter forstner bit - 1-1/2” 10-32 panhead screws and washers - 1/2” diameter forstner bit - MATCHFIT Dovetail Hardware - 45 degree chamfer router bit - 3/4” good quality plywood, 32”x72” FREE DOWNLOADABLE JIG PLANS Scan this QR code for access to our library of free jig plans and for more information about the MATCHFIT 360 System. microjig.com/matchfitplans INSTRUCTIONS STEP 1 - CUT THE STOCK TO SIZE To create the top and vertical side of the 360 workbench, cut a sheet of 3/4” plywood to 45-1/2” x 29-1/2”, and another at 29-1/2” x 18-1/2” on the table saw. Next, cut a sheet of 3/4” MDF to 45-1/4” x 29-1/4”, and another at 29-1/4” x 17-1/4”. INSTRUCTIONS STEP 2 - LAMINATE PLYWOOD AND MDF TOGETHER Glue MDF and plywood together leaving 1/8” reveal on all sides. This is to ensure that you have a flat edge to run along the fence when cutting laminated pieces to final size on the table saw.
    [Show full text]
  • Cotswold Way Discovery This Series of Activity Sheets Supports the Cotswold Way Discovery Resource
    Cotswold Way Discovery This series of activity sheets supports the Cotswold Way Discovery resource. The Going Wild activity sheets for families will help transform every trip to the Cotswold Way into a fun-filled adventure. They have been devised by Jo Schofield and Fiona Danks of Going Wild (www.goingwild.net) - authors of Nature’s Play- ground, Go Wild, Make it Wild and Run Wild, published by Frances Lincoln. There are 10 simple activities that require minimal preparation and equipment. MAKING BIRDS NESTS Please note that anyone taking part in this activity does so STICK AND CLAY CHARACTERS at his or her own risk. MOBILES AND WIND CHIMES The Cotswold Way and the authors do not accept any legal responsibility for any harm, injury, damage, loss or pros- HOBBY ANIMALS ecution resulting from doing this activity. FAIRY AND WIZARD WANDS CROWNS AND MASKS Leave wild places as you find them. IMAGINATIVE SCAVENGER HUNTS Please respect the Countryside Code. CAMOUFLAGE GAMES WIND FLAGS BOWS AND ARROWS Copyright Jo Schofield and Fiona Danks 2010 www.goingwild.net MAKING BIRD NESTS 1 What to take with you • Perhaps a few chocolate eggs Nests provide shelter and warmth and, most importantly, a safe place for adult birds to lay What to collect and incubate eggs and rear their young. Some • Bendy twigs for weaving species build incredibly intricate, finely woven • Grass, moss, feathers etc nests, delicate and light yet strong enough to to line the nests hold and protect the eggs and nestlings. Nests made by human fingers can’t compete How to make the nests with the complex structures created by birds, Show the children a photograph of a nest, or but it’s fun to have a go, using whatever better still have a look for a real bird’s nest, tak- materials can be found.
    [Show full text]
  • Drill Bits 101 I've Used Dowels in a Variety of Woodworking Projects
    Drill Bits 101 I’ve used dowels in a variety of woodworking projects having bought myself a pretty decent doweling jig a few years ago. The jig itself came with a twist drill bit for each of the three dowel sizes. For my dowel joinery I often need to drill holes of two different depths; so sometimes it is handy to have two bits of the same diameter with stops set at the different depths. One day I inadvertently was using both a twist bit and a brad point bit and noticed very different results. For example, drilling into end grain was far more difficult with a brad point bit than with the twist bit. All of this got me wondering about the different types of woodworking drill bits. Hence my investigation into the family tree of woodworking drill bits. Note that many drill bits may be multi-purpose, but generally speaking there are different families of bits for plastic, metal(s), tile, and masonry, etc. The basic job of a drill bit of course is to stay centered and not wander, cut the wood to form a round hole, and eject the chips. Seems simple, but not so perhaps, which is why there are so many types of drill bits and even options on lips, lands, flutes, margins, and other design elements – details beyond the scope of Bevel Cut. Of all the types, the common twist drill, invented by Steven Morse in 1863 and covered in US Patent 38119 is the simplest. The V-angle of the tip can vary from 60 to 118 degrees, with the latter being most common in today’s hardware stores according to my own research.
    [Show full text]
  • MITER SAW SAFETY (Reviewed 9/27/2007)
    MITER SAW SAFETY (Reviewed 9/27/2007) 1. Tool Use and Care • Use clamps or other practical way to secure and support the work piece to a stable platform. Holding the work by hand or against you body is unstable. It allows for work to shift, causes binding of the tool and loss of control. • Do not force tool. Use correct tool for you application. The correct tool will do the job better and safer at the rate for which it is designed. Do not use the tool for purposes not intended – for example; do not use the miter saw for slicing meat. • Do not use tool if switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is dangerous. • Disconnect the plug from the power source before making any adjustments for changing accessories. Such prevention safety measures reduce the risk of starting the tool accidentally. • Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges, are less likely to bind and easier to control. When mounting saw blades be certain that the arrow on the blade matches the direction of the arrow marked on the tool and that the teeth are also pointing in the same direction. • Inspect guards before using. Keep guards in place. Check moving parts for binding or any other condition that may affect the normal operation of safety features of the tool. If damaged, have tool serviced before using the tool. Many accidents are caused by poorly maintained tools. • Do not alter or misuse tool.
    [Show full text]
  • Dual Marking Gauge
    Dual Marking Gauge U.S. Des. Pat. No. D677,179 The Veritas® Dual Marking Gauge has two rods mounted eccentrically in the reference face. One rod has a non-rotating wheel cutter whose bevel faces the reference face (outside cutter) and the other has a non-rotating wheel cutter whose bevel faces away from it (inside cutter), allowing the gauge to be used in a wide range of applications. The hardened steel wheel cutters cut wood fi bers rather than tear them, and produce fi ne cut- lines, ideal for chisel registration. The most common use for this gauge would be as a mortise gauge for scribing both sides of a mortise. Unlike other mortise gauges, the cutters on the Veritas Dual Marking Gauge are used independently, scribing just one line at a time. As a result, this marking gauge can be used anywhere a project requires repeated marking of two dimensions. The individual wheel cutters can be completely retracted into the reference face, and the gauge can function as a single-cutter marking gauge. For most traditional uses, the outside cutter (bevel facing the reference face) would be used; however, for thicknessing a workpiece, the inside cutter (bevel facing away from the reference face) would be used. The eccentric confi guration of the rods maximizes the size of the reference surface, while maintaining the overall size of the gauge. The short side can also be used if space is restricted. As an added advantage, the eccentric nature means this gauge is much less likely to roll off the work surface.
    [Show full text]
  • Build a Plane That Cuts Smooth and Crisp Raised Panels With, Against Or Across the Grain – the Magic Is in the Spring and Skew
    Fixed-width PanelBY WILLARD Raiser ANDERSON Build a plane that cuts smooth and crisp raised panels with, against or across the grain – the magic is in the spring and skew. anel-raising planes are used Mass., from 1790 to 1823 (Smith may to shape the raised panels in have apprenticed with Joseph Fuller doors, paneling and lids. The who was one of the most prolific of the profile has a fillet that defines early planemakers), and another similar Pthe field of the panel, a sloped bevel example that has no maker’s mark. to act as a frame for the field and a flat Both are single-iron planes with tongue that fits into the groove of the almost identical dimensions, profiles door or lid frame. and handles. They differ only in the I’ve studied panel-raising planes spring angles (the tilt of the plane off made circa the late 18th and early 19th vertical) and skew of the iron (which centuries, including one made by Aaron creates a slicing cut across the grain to Smith, who was active in Rehoboth, reduce tear-out). The bed angle of the Smith plane is 46º, and the iron is skewed at 32º. Combined, these improve the quality of cut without changing the tool’s cutting angle – which is what happens if you skew Gauges & guides. It’s best to make each of these gauges before you start your plane build. In the long run, they save you time and keep you on track. Shaping tools. The tools required to build this plane are few, but a couple of them – the firmer chisel and floats – are modified to fit this design.
    [Show full text]
  • Marking and Cutting Gauges
    Well Stocked Shop Multi-Marker If you’re constantly resetting your gauge to a single measurement, a 3-in-1 Brass Wheel Marking Gauge second gauge, like Lee Valley’s brass Marking Gauge #153490, $15.99 05N65.01, $24.50 3-in-1 gauge, may solve the problem. leevalley.com This gauge sports a head that you Marking and can outfit with a pin, knife, or blade, so you can select the cutter best suited to the task at hand. Cutting Gauges What I like best about this tool is its size. More than one way to make your mark woods. Filing a flat on one side of Like a 4" square, the pin can correct the tendency the compact gauge By Jeff Day to tear out, but your best bet is to fits neatly into my cuttingpartner gauge it with a cutting gauge. apron pocket so it’s With a knife-edged marker, a always in easy reach. Marking and excels at making M cutting gauges crisp, clean lines across the any years ago when I A pin-headed gauge is good grain. Compared to a pin- began tooling up my shop, I for establishing lines parallel scratched line, the cutline helps quickly discovered how much One of my first purchases to the grain, such as you’d need prevent splintering and tear- I could accomplish with basic was the markingonly member gauge of the when laying out hinges, grooves out, a handy attribute when hand tools. Though many were gauge family that is technically for drawer bottoms, rabbets, or chiseling dovetails at their antiques, it wasn’t long before called a due to the thickness of a board when baseline.
    [Show full text]
  • Manual Drills ​(Brace Drill, Eggbeater Drill)
    Manual Drills (Brace drill, Eggbeater drill) ​ Identify: Head, Handle, Chuck, Bits (drill and screw bits, which are inserted into the chuck) Accompanying Tools: Clamps (usually at least 2), Goggles Safety: ● Wear eye protection ● Clamp material to be drilled securely to a heavy object, with clamps on opposite ends of the wood ● Be cautious of delicate drill bits ● Lay drill carefully on its side when not in use, with bits aimed in from edge of table Operation for drilling holes: ● Clamp material down, with protective layer between material and table if necessary. A second piece of wood is usually sufficient. ● Insert correct bit or choose drill that has correct bit. Chuck is twisted counter-clockwise to loosen jaws that hold bit, clockwise to tighten ● Identify depth of material, hold drill bit on the side of the clamped wood to see how deep it will go, and to ensure that it won’t go into the table. ● Make dot or X on top of wood where hole is to be drilled. ● Hold operating handle with dominant (drawing) hand, other hand holds head or top handle in place. For ambidextrous tinkerers, whichever hand position feels most comfortable to them. ● Rotate handle clockwise to drill into wood. For brace drill, this is a horizontal turning, for eggbeater drill, it is vertical. ● While bit is in wood, do not let go of drill and avoid wiggling. This can break the bit. ● Binding debris can cause overheating of the bit, or make turning the drill difficult. Back out bit and clear debris as necessary ● Back out bit after the desired depth is achieved.
    [Show full text]
  • EASY-TO-USE CHASSIS HEIGHT GAUGE Chassis Height – a Critical Setup Measurement
    EASY-TO-USE CHASSIS HEIGHT GAUGE Chassis Height – A Critical Setup Measurement Measuring your critical chassis height has always been a bit awkward. You lie on your stomach on the cold dusty floor and try to hold a tape measure up to the frame. And each time you make a change you must re-measure to be sure you’re not too low (won’t pass tech) or too high (transfers too much weight to the outside tires). Takes all the fun out of setting up your car! Here’s a super easy way to make these measurements. These slick new Chassis Height Checkers make quick and easy work of getting this critical dimension consistently to within 1/16” - without even getting dirty. Simply slide it under the car, raise the tape until it touches the frame, and read the height. Couldn’t be quicker or easier. Here’s how it works. The tool contains a tape measure with a built-in tape lock, a slider with pointer and a black knob to clamp to the tape, and a 0-10” scale. It also has a bearing at the end that changes the direction of the tape from horizontal (parallel to the ground) to vertical to measure height. There are 3 different ways to use it. Pick the one that suits your situation: CAR ON GROUND (NOT ON SCALE PADS): 1. Release the lock on the tape measure and allow it to retract completely. This is 2” in height. Loosen the black knob and slide the pointer to read 2.0”.
    [Show full text]
  • Drill Press Notes Requirements: Proper Eye Protection Must Be Worn—Operate Only with Instructor’S Permission and After Proper Instructions Have Been Received
    Drill Press Notes Requirements: Proper eye protection must be worn—operate only with instructor’s permission and after proper instructions have been received. 1. Always use a piece of scrap wood and set the table or stop to keep from drilling into the tabletop. 2. Use a clamp or vise grips to secure/fasten your wood to the table. 3. Make sure that your scrap wood, good wood, and any clamp you are using are the ONLY objects on the table. Other objects can get caught in the machine and cause injuries. 4. Use a “V-block” clamp for C02 cars, round or irregular shaped stock. 5. Select the right size and type of bit. Wood bits for wood; metal bits for metal. 6. Use a center punch for a guide whenever possible. Always use a center punch when drilling into metal or hard woods. 7. Do not panic if the bit gets stuck in the wood. Turn the machine off. When it has completely stopped, remove the bit from your wood. 8. Select the correct drilling speed. For metal or hard woods and large drill bits you should use a slower speed. 9. Always remove the chips from the table after the machine is turned off and is no longer moving. Use a table brush, never your hands. 10. As with any machine, if it is not working properly you should always turn it off, unplug it, and tell a teacher. Section 3 Page 154 Drill Press Written Test Use the correct heading and write the answers on your own paper.
    [Show full text]
  • Marking Gauge
    Online Extra accurate layouts with a Marking Gauge When it comes to fast and accurate layouts, this traditional tool will more than earns its keep in the woodworking shop. Thumb If I were to make a list of the If you take a look at the various the amount of brass details used screw most-used tools in my shop, the marking gauges being sold today, in the construction. The more marking gauge would be you’ll notice two distinct types. expensive gauges have brass thumb near the top. Even with the Some use a steel pin to scribe a line myriad of rulers, calipers, while others use a flat blade. This and digital measuring second type is often called a “cut- devices that are available ting gauge” because the blade slices today, it’s hard to beat this the wood fibers rather than tearing simple tool for accuracy them, like the pin-style marking and ease of use. gauges (see photos at right). Of the two, I prefer the blade-style gauge. Blade Wedge It scores a cleaner, crisper line. DESIGN. A marking gauge is one of those simple tools whose basic design hasn’t changed much over the years. It has a beam and an adjustable fence (or stock) that is Brass wear strip held in place with a thumb screw, or sometimes, a wedge. Fence The only other differences you’re (or stock) Beam likely to find between the various { A marking gauge (top) tears gauges on the market have to do its way across the wood, while with the level of fit and finish and a cutting gauge scores a line.
    [Show full text]