Exterior-grade medium density fiberboard panels. Moisture, insect and rot resistant. No added formaldehyde. Excellent for high-humidity climates
DISTRIBUTED BY FEATURES AND COMMON STANDARDS AND INSTRUCTIONS FOR USE SUPPORTING BENEFITS APPLICATIONS CERTIFICATIONS Amorite can be cut, drilled or routed using the same tools as for hardwood. Routing DOCUMENTATION Amorite is a medium density fiberboard • For high-humidity climates • ICC-ES Evaluation Report No. provides a crisp, clean edge. Please refer to our online documents panel product manufactured with a • For above-ground • Meets or exceeds ANSI A. Grade Always prime and topcoat cut ends prior to installation. for comprehensive technical and finishing formaldehyde-free resin and exterior applications information. The following documents and proprietary biocidal treatment process • Meets grade MR moisture resistance Like other wood-based panels, Amorite expands and contracts with changes in more can be accessed online at roseburg. moisture content. Properly fastening Amorite material along its entire length will for rot and insect resistance. • Bathroom cabinetry • Exceeds requirements of ASTM D2 six com or through your Armorite distributor. minimize expansion and contraction. Manufactured with Western softwoods, • Countertops cycle accelerated aging test • Finishing Guidelines Amorite requires exterior primer and paint for protection and will accept most Amorite provides superior strength with • Exterior signage • ISO 2 Durability of wood use class UCA • Technical Data Sheet less weight and ensures easy nailing, exterior coatings formulated for wood products applications. • Garage doors • No Added Formaldehyde (NAF) machining and finishing. Appropriate for Since Amorite is a wood-based product, proper sealing is required to prevent • Safety Data Sheet cabinetry, trim, finishing carpentry and • Non-structural paint-grade millwork • Meets EPA Formaldehyde Emission paint failure. • Warranty other traditional MDF applications, Regulation, TSCA Title VI* • Outdoor games and sports Topcoat must be applied after installation of fasteners and application of caulk so Amorite is also a practical option for • Outdoor kitchens • Scientific Certification Systems Certified that holes are sealed to protect from moisture migration. certain above-ground exterior % pre-consumer recycled content applications provided proper • Raised panels Because all paint will draw away from a sharp edge or corner, any expansion or fastening and coating/finishing • Forest Stewardship Council® Certified contraction will cause the paint to crack. Therefore, rounding edges and corners is • Shutters procedures are followed. option available highly recommended. • CPA ECC Sustainability Standard Chicago 1 800 646 7564 [email protected] Denver 1 877 972 9112 [email protected] Salt Lake City 1 800 678 2801 [email protected] St. George 1 800 678 2801 [email protected] Coeur d’Alene 1 877 722 0070 [email protected] Sierra Forest Products Seattle 1 877 722 0070 [email protected] Portland 1 877 722 0070 [email protected] www.sierrafp.com Los Angeles 1 800 548 3975 [email protected]