DOCSLIB.ORG

TIMBER FRAMERS GUILD - 2018 WESTERN CONFERENCE - Timberline Lodge, Mt

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
TIMBER FRAMERS GUILD - 2018 WESTERN CONFERENCE - Timberline Lodge, Mt TIMBER FRAMERS GUILD - 2018 WESTERN CONFERENCE - Timberline Lodge, Mt. Hood Timber Framers Guild | 1106 Harris Ave, Suite 303 | Bellingham, WA 98225 | 360-746-6571 For thirty-three years now, without missing a beat, the Timber Framers Guild has gathered the tribe for our annual conference, and for at least the fifth time, we are gathered on the slopes of Mount Hood in one of the very best buildings on the planet—Timberline Lodge. Welcome! The Guild works because members get involved, and events like these are a team effort. Megan Starr, TFG program director has worked with a talented bunch of folks including Michael Cuba, Autumn Peterson, Jonathan Orpin, Jennifer Anthony, and Brenda Baker to put together an outstanding line up of presentations. And, we would be remiss not to mention that the Timber Frame Engineering Council has prepared an exceptional sequenced series of presentations. These events also happen because of generous contributions from our sponsors. They help to make these events affordable, and so we encourage you to thank them, but better yet, buy stuff from them! Our national conference sponsor is Foard Panel. Elk Creek Forest Products is our western conference sponsor. Pioneer Millworks is sponsoring the ax throwing fandango. If you wet your whistle at the auction, thank Fraserwood Industries. The marketing firm, Ketchup & Mustard, contributed the design of our conference logo. Heritage Natural Finishes is sponsoring the Girls Build Program. And last but certainly not least, pFreim Family Brewers is kicking in beer for our speakers. How about that for a perk? It’s always a challenge to pull together content for as diverse a group as the Timber Framers Guild, but we believe this conference sports an excellent line up. We go from basic tools use and techniques, many of which would be familiar to carpenters from the 14th-century, to the complexities of high performance buildings. Wow. Hold onto your hats! Looking over the registration list, we note that at least 40 of you are here for your first Guild conference. Welcome, welcome, welcome! From the very beginning, sharing knowledge was at the heart of the Timber Framers Guild, and now into our fourth decade, the TFG has evolved into a unique learning community. We hope that you find, as many TFG members have found, life-long learning opportunities and a network of special folks. Sincerely, Your TFG Board of Directors TABLE OF CONTENTS CONFERENCE SCHEDULE 1 AGENDA AT A GLANCE 3 FEATURED PRESENTATIONS 7 SESSION DESCRIPTIONS 9 SPEAKER BIOS 21 TRADE SHOW VENDOR LIST 29 SPONSORS 34 SCHEDULE AT A GLANCE THURSDAY - FRIDAY 2018 TFG WESTERN CONFERENCE MAY 31- JUNE 3 2018 THURSDAY MAY 31ST ATP Presents: Modern Timber Connectors* 9:00-5:00 TFG Companies Presents: MBA in a Day* 9:00-5:00 Tour of Timberline Lodge 12:30 -2:30 Woodmizer and Blacksmith Demo at Cascadia Center for Arts and Crafts 1:30-4:30 Conference Registration Opens 4:00-6:00 Tradeshow Set up Begins 4:00 PM FRIDAY JUNE 1ST Mt Jefferson Room Barlow Room Ravens Nest Mt Hood Room Wood Science and High Performance and Life, the Universe & Skills and Craft Engineering Great Design Everything Else 7:30am - 9:00 am Breakfast in the Wy'East Lodge 9:00 am - 9:30 am Welcome & Opening Comments (Ullman Hall) 9:30 am - 10:30 am FEATURED SPEAKER: Gary Rogowski (Ullman Hall) 10:30 am - 11:00 am Break - Bookstore and Trade Show Open Visible Steel in Timber Micro-Structure and Macro- Compass and Straightedge: Framing: Case Studies - Historic Timber Structures - Behavior of Wood - Dick Geometric Layout - Adam Andrea Warchaizer, Chris David Rogers Schmidt* Miller Koehn, Kevin Mattson, and 11:00 am - 12:30 pm Friends 12:30pm - 1:30 pm Lunch in the Wy'East Lodge Wood Species Identification - Tom Nehil & Faux Finishes on Timbers - Net Zero Energy - Frank The Sawmill - Bob Sproul Suzana Radivojevic* Mike Westgard* Baker* 1:30 pm - 2:30 pm 2:30 pm - 2:45 pm Break - Bookstore and Trade Show Open Determining Allowable Holy Grail of Roof Framing Design Stresses for Timber Building for the Next Blacksmithing - Nathan Neale Geometry & Trigonometry - Using ASTM D2555 and Generation - Max Baker Sim Ayers 2:45 5:00pm - pm- 3:45 6:00 pm pm D245 - Tom Nehil* TFG Members Meeting Ullman Hall 6:00 pm- 7:30 pm Dinner in the Wy'East Lodge - Ax Trials Break - Bookstore and Trade Show Open 3:45 7:30pm - pm- 4:15 10:00 pm pm TFG Benefit Auction Ullman Hall The Dance of Round & Building Community: How to Capitalize on the SUNDAY JUNE 3RD Tool Sharpening Skills - Square: Design, Details & Volunteer Projects, Social 7:30 pm- 9:00 pm Hidden Capacity in Timber - Breakfast in the Wy'East Lodge Darren Watson Outcomes - Mira Justice, and Meaning - Steve Ron Anthony* 4:15 pm -5:15 pm Timber Frame Pavillions - Ben Brungraber - Ullman Hall* 9:00 pm- 10:00 pm * Steinbrecher* Eisenbach Budner 5:15 pm - 6:45 pm Tradeshow Mixer Maker v. Manager: The Personal Challenge of Fulfillment in Our Work Jonathan Orpin, Gary Rogowski and Friends Dinner in the Wy'East Lodge 6:45 10:15pm - 7:45am -11:15pm am - Ullman Hall 11:15 am-11:30 am Closing Remarks Ullman Hall TFG Slideshow (Ullman Hall) 7:45 11:30pm - 10:30am-12:00 pm pm Bookstore Open SATURDAY JUNE 2ND *These presentationsGirls Build Workshop are eligible 10:00 AMfor - AIA5:00 ContinuingPM Education Units Mt Jefferson Room Barlow Room Ravens Nest Mt Hood Room Wood Science and High Performance and Life, the Universe & Skills and Craft Engineering Great Design Everything Else 7:00 am - 8:00 am Breakfast in the Wy'East Lodge - Ax Trials Begin Hand Planes: The Virtue of Log Structure Engineering - Design Software Overview - Why Trees are Stronger than Slowing Down - Gary Jennifer Anthony* Panel Wood - Roald Gunderson 8:00 am - 9:00 am Regowski 9:00 am - 9:15 am Break - Bookstore and Trade Show Open Stress Concentrations: The Why Timber Frames Stand The Moosilauke Lodge - Effect of Notching Timbers - Up - Janet Kane* Adam Miller 9:15 am - 10:15 am Joe Miller* 10:15 am-10:30 am Break - Bookstore and Trade Show Open 10:30 am-11:30 am FEATURED SPEAKER Bruce King In (Ullman Hall) 11:30 am- 1:00 pm Lunch in the Wy'East Lodge - Ax Trials Fundamentals of Truss, Bent Vapor Permeable and Carbon and Wall Design and the Scarf Joints - Phil Kneisley & Friendly Wall Envelopes for Timber Framing in Remote Common Deviations That Willis Rozycki* Timber Framed Buildings - Locations - Dave Petrina Can Cause Structural Joseph Becker 1:00 pm- 2:00 pm Problems - Jeff Hershberger 2:00 pm- 2:15 pm Break - Bookstore and Trade Show Open Seismic Performance of Knee- Brace Timber Frames - 1 Advanced, High-Performance Hewing a Hexagonal Column - Timberline and WPA - Sarah Johnn Judd & and Low Carbon Materials - David Rogers Munro Fernando Fonseca Bruce King & Friends 2:15 pm - 3:15 pm 3:15 pm - 3:45 pm Break - Bookstore and Trade Show Open 3:45 pm-4:45 pm FEATURED SPEAKER Thomas Robinson, Lever Architecture (Ullman Hall) 2018 TFG WESTERN CONFERENCE MAY 31- JUNE 3 2018 THURSDAY MAY 31ST ATP Presents: Modern Timber Connectors* 9:00-5:00 TFG Companies Presents: MBA in a Day* 9:00-5:00 Tour of Timberline Lodge 12:30 -2:30 Woodmizer and Blacksmith Demo at Cascadia Center for Arts and Crafts 1:30-4:30 Conference Registration Opens 4:00-6:00 Tradeshow Set up Begins 4:00 PM FRIDAY JUNE 1ST Mt Jefferson Room Barlow Room Ravens Nest Mt Hood Room Wood Science and High Performance and Life, the Universe & Skills and Craft Engineering Great Design Everything Else 7:30am - 9:00 am Breakfast in the Wy'East Lodge 9:00 am - 9:30 am Welcome & Opening Comments (Ullman Hall) 9:30 am - 10:30 am FEATURED SPEAKER: Gary Rogowski (Ullman Hall) 10:30 am - 11:00 am Break - Bookstore and Trade Show Open Visible Steel in Timber Micro-Structure and Macro- Compass and Straightedge: Framing: Case Studies - Historic Timber Structures - Behavior of Wood - Dick Geometric Layout - Adam Andrea Warchaizer, Chris David Rogers Schmidt* Miller Koehn, Kevin Mattson, and 11:00 am - 12:30 pm Friends 12:30pm - 1:30 pm Lunch in the Wy'East Lodge Wood Species Identification - Tom Nehil & Faux Finishes on Timbers - Net Zero Energy - Frank The Sawmill - Bob Sproul Suzana Radivojevic* Mike Westgard* Baker* 1:30 pm - 2:30 pm 2:30 pm - 2:45 pm Break - Bookstore and Trade Show Open Determining Allowable Holy Grail of Roof Framing Design Stresses for Timber Building for the Next Blacksmithing - Nathan Neale Geometry & Trigonometry - Using ASTM D2555 and Generation - Max Baker Sim Ayers 2:45 pm - 3:45 pm D245 - Tom Nehil* 3:45 pm - 4:15 pm Break - Bookstore and Trade Show Open The Dance of Round & Building Community: How to Capitalize on the Tool Sharpening Skills - Square: Design, Details & Volunteer Projects, Social Hidden Capacity in Timber - Darren Watson Outcomes - Mira Justice, and Meaning - Steve Ron Anthony* 4:15 pm -5:15 pm SATURDAY-SUNDAYSteinbrecher* Eisenbach Budner SCHEDULE AT A GLANCE 5:15 pm - 6:45 pm Tradeshow Mixer Dinner in the Wy'East Lodge 6:45 pm - 7:45 pm 2018 TFG WESTERNTFG CONFERENCE Slideshow (Ullman Hall) MAY 31- JUNE 3 2018 7:45 pm - 10:30 pm SATURDAYTHURSDAY JUNEMAY 31ST 2ND ATP Presents:Girls Build Modern Workshop Timber 10:00 Connectors* AM - 5:00 9:00-5:00PM Mt Jefferson Room Barlow Room Ravens Nest TFGMt Companies Hood Room Presents: MBA in a Day* 9:00-5:00 Wood Science and High Performance and Life, the Universe & SkillsTour and of Craft Timberline Lodge 12:30 -2:30 EngineeringWoodmizer and Blacksmith Demo at Cascadia CenterGreat for Design Arts and Crafts 1:30-4:30Everything Else 7:00 am - 8:00 am BreakfastConference in the Registration Wy'East Lodge Opens - Ax 4:00-6:00
Load more

Recommended publications
  • TFEC 1-2019 Standard for Design of Timber Frame Structures And
    TFEC 1-2019 Standard for Design of Timber Frame Structures and Commentary TFEC 1-2019 Standard Page 1 January 2019 TFEC 1-2019 Standard for Design of Timber Frame Structures and Commentary Timber Frame Engineering Council Technical Activities Committee (TFEC-TAC) Contributing Authors: Jim DeStefano Jeff Hershberger Tanya Luthi Jaret Lynch Tom Nehil Dick Schmidt, Chair Rick Way Copyright © 2019, All rights reserved. Timber Framers Guild 1106 Harris Avenue, Suite 303 Bellingham, WA 98225 TFEC 1-2019 Standard Page 2 January 2019 Table of Contents 1.0 General Requirements for Structural Design and Construction .......................................6 1.1 Applicability and Scope ........................................................................................ 6 1.2 Liability ................................................................................................................. 6 1.3 General Requirements ........................................................................................... 7 1.3.1 Strength ........................................................................................................... 7 1.3.2 Serviceability ................................................................................................... 7 1.3.3 General Structural Integrity ............................................................................. 7 1.3.4 Conformance with Standards .......................................................................... 7 1.4 Design Loads ........................................................................................................
    [Show full text]
  • Frame Design by David Lantrip, MCPF, GCF Framing Stained Glass
    Frame Design by David Lantrip, MCPF, GCF Framing Stained Glass skilled framer needs to be prepared to han- dle just about any form of artwork a cus- Atomer presents. Artwork that is seen less often can test a framer’s nerves since the particular needs and framing methods of that type of art might not come readily to mind. This is precisely why framers need to be prepared beforehand. After all, the design counter is not the place to learn about framing new type of artwork if the customer is to have confidence that the job will be done right. One such type of art is stained glass. Despite the fact that stained glass as an art has existed for 1,000 years, it’s not every day that someone brings a piece in to be framed. Displaying stained glass Traditional stained glass work, such as may seem intimidating, that found in but it can be framed churches and important build- and handled routinely ings, is worked in Stained glass worked in the Tiffany method midway through the lead came the soldering process. Once the soldering is complete, a small by following a few metal frame is applied, the solder has a patina applied, and the method. Relatively entire piece is cleaned and polished. basic design principles large pieces of glass, cut to shape, are held within H-shaped channels of lead known as foil strip, usually about ¼” wide, to the edge of the “came.” The ends of the came are soldered to adja- individual pieces of glass, burnishing and folding it cent pieces, and the glass is held tight with mastic to either side of the glass.
    [Show full text]
  • Framer Modular.Indd
    Assemblyy table for panelsp This Framer Modular is a component-based framing & assembly table for off -site panel construction. This system is a perfect solution for those who like to “do it yourselves”. Engineered components are fl at-packed and bolt- assembled to minimize transportation and installation costs while delivering a fl exible, fully customized wall panel assembly station. The Framer Modular is designed to deliver the best framing table solution for shops looking for effi ciency, accuracy, and fl exibility at an aff ordable budget. This system is customizable and expandable, with kits of components and accessories allowing shops to build the worktable to suit their specifi c production needs. This DIY delivery & assembly system optimizes an upfront investment through fl exible options while off ering the same robust, engineered panel assembling technology for which Soukup strives without compromise The Framer Modular is supplied as a kit with optional accessories can be assembled in various confi gurations to support the production of: Panel lengths at 6, 9.4, and 12.8 meters Panel widths from 400 to 3000 mm Optional extensions, up to 3800 mm at a working height of 700mm. The Framer Modular System comprises: Expandable Supporting Frame Structure Customizable Tabletop Elements Framing and Assembly Accessories Expandable Supporting Frame Structure 6-meter Table Confi guration: Consists of 2 End Modules 9.4-meter Table Confi guration: Consists of 2 End Modules + 1 Center Module 12.8-meter Table Confi guration: Consists of 2 End Modules + 2 Center Modules DIY: Build your own supporting frame structure with KVH structural timber according to our instruction manual.
    [Show full text]
  • Section 061053 - Miscellaneous Rough Carpentry
    SECTION 061053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section. 1.2 SUMMARY A. This Section includes the following: 1. Wood framing, blocking, and nailers 2. Wood battens, shims, and furring (for wall panel attachment). 3. Plywood sheathing for miscellaneous structures and replacement of deteriorated roof sheathing. B. Related Sections include the following: 1. Section 075216 "SBS Modified Bituminous Membrane Roofing" for adhesively applied 2-ply, SBS bituminous membrane roofing, with self-adhered base ply sheet. 2. Section 076200 "Sheet Metal Flashing and Trim" for installing sheet metal flashing and trim integral with roofing. 1.3 DEFINITIONS A. Dimension Lumber: Lumber of 2-inches nominal or greater but less than 5-inches nominal in least dimension. B. Lumber grading agencies, and the abbreviations used to reference them, include the following: 1. NLGA: National Lumber Grades Authority. 2. WCLIB: West Coast Lumber Inspection Bureau. 3. WWPA: Western Wood Products Association. 1.4 QUALITY ASSURANCE A. Testing Agency Qualifications: For testing agency providing classification marking for fire- retardant treated material, an inspection agency acceptable to authorities having jurisdiction that periodically performs inspections to verify that the material bearing the classification marking is representative of the material tested. PRSD – Thompson Elementary School Roof Replacement 061053 – MISCELLANEOUS ROUGH CARPENTRY July, 2012 Page 1 of 7 B. Forest Certification: For the following wood products, provide materials produced from wood obtained from forests certified by an FSC-accredited certification body to comply with FSC 1.2, "Principles and Criteria": 1.
    [Show full text]
  • Environmental Considerations of Treated Wood National Park Service – Pacific West Region
    Environmental Considerations of Treated Wood National Park Service – Pacific West Region Overview In support of the mission of the National Park Service, making wise decisions about using wood treatments will help protect the natural areas and biodiversity of our parks, and the health of our employees. Preservative-treated wood’s most important benefit is its resistance to water, fungal, and insect damage. Extending the life of wood products reduces the demands on forests for replacement lumber and reduces maintenance and replacement costs. Historic wooden structures that must be repaired with compatible materials or replaced with in-kind materials make durability even more important. Treated woods are nearly impervious to rot and insects, making them good for outdoor use. Wood treated with chromated copper arsenate (CCA) poses certain environmental and health risks, including the leaching of chemicals such as arsenic and chromium into the environment and workers’ risk of exposure to hazardous chemicals. Disposal of treated wood also proves to be an issue, particularly disposal by incineration. Due to these concerns, manufacturers of treated wood and the EPA reached an agreement to end the sale of CCA-treated wood for most lumber products, effective January 1, 2004. The following offers less-toxic alternatives to CCA, handling and use precautions, and other recommendations when considering using treated wood. Due to the toxicity and potential effects on health and the environment, the Presidio Trust implemented a policy on the use of pressure treated lumber. Standard operating procedure now prohibits the use of CCA, ACZA, CZC, ACC, and Pentachlorophenol. All dimensional lumber is now treated with ACQ as an alternative.
    [Show full text]
  • Code of Practice for Wood Processing Facilities (Sawmills & Lumberyards)
    CODE OF PRACTICE FOR WOOD PROCESSING FACILITIES (SAWMILLS & LUMBERYARDS) Version 2 January 2012 Guyana Forestry Commission Table of Contents FOREWORD ................................................................................................................................................... 7 1.0 INTRODUCTION ...................................................................................................................................... 8 1.1 Wood Processing................................................................................................................................. 8 1.2 Development of the Code ................................................................................................................... 9 1.3 Scope of the Code ............................................................................................................................... 9 1.4 Objectives of the Code ...................................................................................................................... 10 1.5 Implementation of the Code ............................................................................................................. 10 2.0 PRE-SAWMILLING RECOMMENDATIONS. ............................................................................................. 11 2.1 Market Requirements ....................................................................................................................... 11 2.1.1 General ..........................................................................................................................................
    [Show full text]
  • Innovations in Heavy Timber Construction • © 2011 Woodworks
    I NNOVAT I ONS I N T I MBER C ONSTRU C T I ON eavy timber construction—used for hundreds of years around the world—successfully combines the Combining beauty of exposed wood with the strength and fire the Beauty Hresistance of heavy timber. The traditional techniques used in ancient churches and temples, with their of Timber high-vaulted ceilings, sweeping curves and enduring strength, still influence today’s structures. The hallmarks of heavy timber—prominent wood beams and timbers—now also include elegant, leaner framing that celebrates the with Modern expression of structure with a natural material. A visual emphasis on beams, purlins and connections lends character and a powerful aesthetic sense Construction of strength. Historically a handcrafted skill of mortise and tenon joinery, heavy timber construction has been modernized by tools such as CNC machines, high- strength engineered wood products, and mass-production techniques. A growing environmental awareness that recognizes wood as the only renewable and sustainable structural building material is also invigorating this type of construction. Heavy timbers are differentiated from dimensional lumber by having minimum dimensions required by the building code. Modern versions include sawn stress-grade lumber, timber tongue and groove decking, glued-laminated timber (glulam), parallel strand lumber (PSL), laminated veneer lumber (LVL) and cross laminated timber (CLT). Structural laminated products can be used as solid walls, floors and columns to construct an entire building. Modern heavy timber construction contributes to the appeal, comfort, structural durability and longevity of schools, churches, large-span recreation centers, mid-rise/multi-family housing and supermarkets, among many other buildings.
    [Show full text]
  • 18Th Annual Eastern Conference of the Timber Framers Guild
    Timber Framers Guild 18th Annual Eastern Conference November 14–17, 2002, Burlington, Vermont The Timber Framer’s Panel Company www.foardpanel.com P.O. Box 185, West Chesterfield, NH 03466 ● 603-256-8800 ● [email protected] Contents FRANK BAKER Healthy Businesses. 3 BRUCE BEEKEN Furniture from the Forest . 4 BEN BRUNGRABER AND GRIGG MULLEN Engineering Day to Day ENGINEERING TRACK . 6 BEN BRUNGRABER AND DICK SCHMIDT Codes: the Practical and the Possible ENGINEERING TRACK . 8 RUDY CHRISTIAN Understanding and Using Square Rule Layout WORKSHOP . 13 RICHARD CORMIER Chip Carving PRE-CONFERENCE WORKSHOP . 14 DAVID FISCHETTI AND ED LEVIN Historical Forms ENGINEERING TRACK . 15 ANDERS FROSTRUP Is Big Best or Beautiful? . 19 ANDERS FROSTRUP Stave Churches . 21 SIMON GNEHM The Swiss Carpenter Apprenticeship . 22 JOE HOWARD Radio Frequency Vacuum Drying of Large Timber: an Overview . 24 JOSH JACKSON Plumb Line and Bubble Scribing DEMONSTRATION . 26 LES JOZSA Wood Morphology Related to Log Quality. 28 MICHELLE KANTOR Construction Law and Contract Management: Know your Risks. 30 WITOLD KARWOWSKI Annihilated Heritage . 31 STEVE LAWRENCE, GORDON MACDONALD, AND JAIME WARD Penguins in Bondage DEMO 33 ED LEVIN AND DICK SCHMIDT Pity the Poor Rafter Pair ENGINEERING TRACK . 35 MATTHYS LEVY Why Buildings Don’t Fall Down FEATURED SPEAKER . 37 JAN LEWANDOSKI Vernacular Wooden Roof Trusses: Form and Repair . 38 GORDON MACDONALD Building a Ballista for the BBC . 39 CURTIS MILTON ET AL Math Wizards OPEN ASSISTANCE . 40 HARRELSON STANLEY Efficient Tool Sharpening for Professionals DEMONSTRATION . 42 THOMAS VISSER Historic Barns: Preserving a Threatened Heritage FEATURED SPEAKER . 44 Cover illustration of the Norwell Crane by Barbara Cahill.
    [Show full text]
  • UFGS 06 10 00 Rough Carpentry
    ************************************************************************** USACE / NAVFAC / AFCEC / NASA UFGS-06 10 00 (August 2016) Change 2 - 11/18 ------------------------------------ Preparing Activity: NAVFAC Superseding UFGS-06 10 00 (February 2012) UNIFIED FACILITIES GUIDE SPECIFICATIONS References are in agreement with UMRL dated July 2021 ************************************************************************** SECTION TABLE OF CONTENTS DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES SECTION 06 10 00 ROUGH CARPENTRY 08/16, CHG 2: 11/18 PART 1 GENERAL 1.1 REFERENCES 1.2 SUBMITTALS 1.3 DELIVERY AND STORAGE 1.4 GRADING AND MARKING 1.4.1 Lumber 1.4.2 Structural Glued Laminated Timber 1.4.3 Plywood 1.4.4 Structural-Use and OSB Panels 1.4.5 Preservative-Treated Lumber and Plywood 1.4.6 Fire-Retardant Treated Lumber 1.4.7 Hardboard, Gypsum Board, and Fiberboard 1.4.8 Plastic Lumber 1.5 SIZES AND SURFACING 1.6 MOISTURE CONTENT 1.7 PRESERVATIVE TREATMENT 1.7.1 Existing Structures 1.7.2 New Construction 1.8 FIRE-RETARDANT TREATMENT 1.9 QUALITY ASSURANCE 1.9.1 Drawing Requirements 1.9.2 Data Required 1.9.3 Humidity Requirements 1.9.4 Plastic Lumber Performance 1.10 ENVIRONMENTAL REQUIREMENTS 1.11 CERTIFICATIONS 1.11.1 Certified Wood Grades 1.11.2 Certified Sustainably Harvested Wood 1.11.3 Indoor Air Quality Certifications 1.11.3.1 Adhesives and Sealants 1.11.3.2 Composite Wood, Wood Structural Panel and Agrifiber Products SECTION 06 10 00 Page 1 PART 2 PRODUCTS 2.1 MATERIALS 2.1.1 Virgin Lumber 2.1.2 Salvaged Lumber 2.1.3 Recovered Lumber
    [Show full text]
  • Designing for Durability CONTINUING EDUCATION Strategies for Achieving Maximum Durability with Wood-Frame Construction Sponsored by Rethink Wood
    EDUCATIONAL-ADVERTISEMENT Designing for Durability EDUCATION CONTINUING Strategies for achieving maximum durability with wood-frame construction Sponsored by reThink Wood rchitects specify wood for many Examples of wood buildings that have (glulam), cross laminated timber (CLT), and reasons, including cost, ease and stood for centuries exist all over the world, nail-laminated timber, along with a variety A efficiency of construction, design including the Horyu-ji temple in Ikaruga, of structural composite lumber products, are versatility, and sustainability—as well as Japan, built in the eighth century, stave enabling increased dimensional stability and its beauty and the innate appeal of nature churches in Norway, including one in Urnes strength, and greater long-span capabilities. and natural materials. Innovative new built in 1150, and many more. Today, wood These innovations are leading to taller, technologies and building systems are also is being used in a wider range of buildings highly innovative wood buildings. Examples leading to the increased use of wood as a than would have been possible even 20 years include (among others) a 10-story CLT structural material, not only in houses, ago. Next-generation lumber and mass timber apartment building in Australia, a 14-story schools, and other traditional applications, products, such as glue-laminated timber timber-frame apartment in Norway, but in larger, taller, and more visionary wood buildings. But even as the use of wood is expanding, one significant characteristic of wood buildings is often underestimated: their durability. Misperceptions still exist that buildings made of materials such as concrete or steel last longer than buildings made of wood.
    [Show full text]
  • 06 10 00 --- Rough Carpentry
    DESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 6 WOODS & PLASTICS 06 10 00 • ROUGH CARPENTRY SECTION INCLUDES Dimensional Wood Framing Sheathing Prefabricated Trusses Wood Blocking Engineered Wood Framing Termite Shield RELATED SECTIONS 03 30 00 Concrete 06 20 00 Finish Carpentry 06 50 00 Structural Plastics & Composites 06 65 00 Plastic and Composite Trim 07 62 00 Sheet Metal Trim & Flashing ABBREVIATIONS-TESTING, CERTIFYING AND GRADING AGENCIES AITC- American Institute of Timber Construction www.aitc-glulam.org ALSC- American Lumber Standards Committee www.alsc.org ANSI- American National Standards Institute www.ansi.org APA- The Engineered Wood Association, (formerly American Plywood Association) www.apawood.org AWPA- American Wood Protection Association www.awpa.com CSA- Canadian Standards Association www.csa.ca FSC- Forest Stewardship Council www.fscus.org NIST- National Institute for Standards and Technology www.nist.gov SFI-Sustainable Forest Initiative www.sfiprogram.org TPI- Truss Plate Institute www.tpint.org LOAD CALCULATIONS DESIGN Calculate loads and specify the fiber stress for lumber. Avoid over-designing that will result in unnecessarily high material costs. Spruce, Pine or Fir should be adequate for most conditions; provide a rationale for any other species. ENVIRONMENTAL ISSUES PRODUCTS Use of wood from well-managed forests is preferred. Specify one or more of the following standards: Forest Stewardship Council (FSC); Sustainable Forest Initiative (SFI); or Canadian Standards Association (CSA). Using certified wood encourages a well-managed forest industry. Look for engineered wood products with certified wood content, recycled or recovered wood, and/or products that are produced within 500 miles of the project site. The use of engineered wood should be evaluated on R 06 10 00 ROUGH CARPENTRY……….
    [Show full text]
  • Presentazione WE 2021
    Wood-Experience Veronafiere, 3-6 March 2021 Veronafiere, 3-6 marzo 2021 www.wood-experience.com Wood-Experience The reasons for a new Event Wood Experience represents the evolution and development of Legno & Edilizia, a trade exhibition that has represented the reference point for the wooden construction sector for 20 years. Faithful to Piemmeti's vocation of specialization in the wood supply chain, a material symbol of natural values, sustainability and savings, Wood-Experience is the only meeting platform for the sector. It represent an important business and international exchange opportunity, along with a great occasion to shine a light and to draw the Media’s attention on the sector. For this reason, “Wood-Experience” will propose both to exhibitors and visitors a focused trade fair format that will takle into consideration the new business needs, safety and internationality. Veronafiere, 3-6 marzo 2021 www.wood-experience.com Wood-Experience Tecnologies for the wood supply chain Wood Experience is the only Italian Event dedicated to the entire wood supply chain. A supply chain exhibition proposal that starts from the forest and the sawmill, has its core business in woodworking machines, both for construction / structural purposes and for furniture / furnishings, to arrive at finishing, treatment and processing complement. Veronafiere, 3-6 marzo 2021 www.wood-experience.com Wood-Experience The product chain • Machines and technologies for primary wood processing (forest) • Technology for sawmills • Woodworking machines: For construction
    [Show full text]