CERTIFICATE OF CONFORMITY OF FACTORY PRODUCTION CONTROL

Notified Body No 2866

In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product

Roof trusses Prefabricated structural members intended for use in buildings. Made from solid structural timber that complies to EN 14081-1 and from structural finger jointed solid timber that complies to EN 15497 and assembled with punched metal plate fasteners. Design Method 3a and 3b

Produced by

Norges Hus Nova OÜ

Lao, küla Raasiku vald, Harjumaa 75207

in the manufacturing site

Talli kinnistu, küla, Raasiku vald, Harjumaa 75212, Estonia

This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard

EN 14250:2010

under system 2+ are applied and that the factory production control fulfils all the prescribed requirements set out above.

This certificate will remain valid until the extension date, provided that the test methods and/ or factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing conditions in the plant are not modified significantly.

______Signed on behalf of NCS Estonia OÜ Kerli Vislapuu, Certification Manager

NCS Estonia OÜ Certificate Number: Peterburi tee 81, 13816 , Estonia 2866-CPR-0023 Version: v1

First Issue Date: Validity of this certificate can be verified by contacting NCS Estonia OÜ: [email protected]. 20.11.2020

Last Issue Date:

20.11.2020 This certificate remains the property of NCS Estonia OÜ. Further

clarification regarding the scope of the certificate and verification of the Extension Date: certificate is available through NCS Estonia OÜ at the above address 19.11.2021 or at www.ncsgroup.eu.