Memristor Devices: Fabrication, Characterization, Simulation
MEMRISTOR DEVICES: FABRICATION, CHARACTERIZATION, SIMULATION, AND CIRCUIT DESIGN Thesis Submitted to The School of Engineering of the UNIVERSITY OF DAYTON In Partial Fulfillment of the Requirements for The Degree of Master of Science in Electrical Engineering By Chris Yakopcic Dayton, Ohio August, 2011 MEMRISTOR DEVICES: FABRICATION, CHARACTERIZATION, SIMULATION, AND CIRCUIT DESIGN Name: Yakopcic, Chris APPROVED BY: _________________________________ _________________________________ Tarek M. Taha, Ph.D. Guru Subramanyam, Ph.D. Advisory Committee Chairman Committee Member Associate Professor Chair and Professor Electrical and Computer Engineering Electrical and Computer Engineering _________________________________ Andrew Sarangan, Ph.D. Committee Member Associate Professor Electro-Optics _________________________________ _________________________________ John G. Weber, Ph.D. Tony E. Saliba, Ph.D. Associate Dean Dean, School of Engineering School of Engineering & Wilke Distinguished Professor ii ©Copyright by Chris Yakopcic All Rights Reserved 2011 iii ABSTRACT MEMRISTOR DEVICES: FABRICATION, CHARACTERIZATION, SIMULATION, AND CIRCUIT DESIGN Name: Yakopcic, Chris University of Dayton Advisor: Dr. Tarek M. Taha Significant interest has been placed on developing systems based on memristors since the initial fabrication by HP Labs in 2008 [1]. The memristor is a nanoscale device with dynamic resistance that is able to retain the last programmed resistance value after power is removed from the device. This property shows that the memristor can be used as a non-volatile memory component, and has potential to enhance many types of systems, such as high density memory, and neuromorphic computing architectures. This thesis presents the fabrication and characterization results obtained based memristor devices developed at the University of Dayton. In addition, a comparison between the existing memristor device models was completed to show how the memristor can be used in a multistate operation.
[Show full text]