DOCSLIB.ORG

Programul De Standardizare N

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Programul De Standardizare N Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic 10 CEN ISO/TR 17424:2015 Maps concepts (ISO/TR 17424:2015) Trim. 1 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for 11 CEN ISO/TR 18486:2018 weathering applications to a reference solar spectral irradiance Trim. 1 Guidance for the selection, use and maintenance of safety and occupational footwear and 12 CEN ISO/TR 18690:2012 other personal protective equipment offering foot and leg protection (ISO/TR 18690:2012) Trim. 1 Human response to vibration - Guidance and terminology for instrumentation and 13 CEN ISO/TR 19664:2018 equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety (ISO/TR 19664:2017) Trim. 1 Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - 14 CEN ISO/TR 19905-2:2013 Part 2: Jack-ups commentary and detailed sample calculation (ISO/TR 19905-2:2012) Trim. 1 15 CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) Trim. 1 16 CEN ISO/TR 20173:2018 Welding - Grouping systems for materials - American materials (ISO 20173:2018) Trim. 1 17 CEN ISO/TR 20174:2005 Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005) Trim. 1 Footwear - Performance requirements for components for footwear - Accessories (ISO/TR 18 CEN ISO/TR 20572:2007 20572:2007) Trim. 1 Footwear - Performance requirements for components for footwear - Heels and top 19 CEN ISO/TR 20573:2008 pieces (ISO/TR 20573:2006) Trim. 1 Footwear - Performance requirements for components for footwear - Uppers (ISO/TR 20 CEN ISO/TR 20879:2007 20879:2007) Trim. 1 Footwear - Performance requirements for components for footwear - Outsoles (ISO/TR 21 CEN ISO/TR 20880:2007 20880:2007) Trim. 1 Footwear - Performance requirements for components for footwear - Insoles (ISO/TR 22 CEN ISO/TR 20881:2007 20881:2007) Trim. 1 Footwear - Performance requirements for components for footwear - Lining and insocks 23 CEN ISO/TR 20882:2007 (ISO/TR 20882:2007) Trim. 1 Footwear - Performance requirements for components for footwear - Shanks (ISO/TR 24 CEN ISO/TR 20883:2007 20883:2007) Trim. 1 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of 25 CEN ISO/TR 22007-5:2014 interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011) Trim. 1 Footwear - Performance requirements for components for footwear - Stiffeners and 26 CEN ISO/TR 22648:2007 toepuffs (ISO/TR 22648:2007) Trim. 1 Public transport - Interoperable fare management system - Part 2: Business practices 27 CEN ISO/TR 24014-2:2013 (ISO/TR 24014-2:2013) Trim. 1 Public transport - Interoperable fare management system - Part 3: Complementary 28 CEN ISO/TR 24014-3:2013 concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013) Trim. 1 2 din 222 Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 29 CEN ISO/TR 24094:2007 24094:2006) Trim. 1 30 CEN ISO/TR 25107:2006 Non-destructive testing - Guidelines for NDT training syllabuses (ISO/TR 25107:2006) Trim. 1 Basic human body measurements for technological design - Part 2: Statistical summaries 31 CEN ISO/TR 7250-2:2011 of body measurements from individual ISO populations (ISO/TR 7250-2:2010) Trim. 1 Basic human body measurements for technological design - Part 2: Statistical summaries 32 CEN ISO/TR 7250-2:2011/A1:2013 of body measurements from national populations (ISO/TR 7250-2:2010/Amd 1:2013) Trim. 1 Ergonomics of human-system interaction - Part 100: Introduction to standards related to 33 CEN ISO/TR 9241-100:2011 software ergonomics (ISO/TR 9241-100:2010) Trim. 1 Ergonomics of human-system interaction - Part 308: Surface-conduction electron-emitter 34 CEN ISO/TR 9241-308:2015 displays (SED) (ISO/TR 9241-308:2008) Trim. 1 Ergonomics of human-system interaction - Part 309: Organic light-emitting diode (OLED) 35 CEN ISO/TR 9241-309:2015 displays (ISO/TR 9241-309:2008) Trim. 1 Ergonomics of human-system interaction - Part 310: Visibility, aesthetics and ergonomics 36 CEN ISO/TR 9241-310:2015 of pixel defects (ISO/TR 9241-310:2010) Trim. 1 Ergonomics of human-system interaction - Part 331: Optical characteristics of 37 CEN ISO/TR 9241-331:2013 autostereoscopic displays (ISO/TR 9241-331:2012) Trim. 1 Nanomaterials - Quantification of nano-object release from powders by generation of 38 CEN ISO/TS 12025:2015 aerosols (ISO/TS 12025:2012) Trim. 1 Petroleum and natural gas industries - Pipeline transportation systems - Recommended 39 CEN ISO/TS 12747:2013 practice for pipeline life extension (ISO/TS 12747:2011) Trim. 1 Sterilization of health care products - Radiation - Substantiation of selected sterilization 40 CEN ISO/TS 13004:2014 dose: Method VDmaxSD (ISO/TS 13004:2013) Trim. 1 Nanotechnologies - Guidance on voluntary labelling for consumer products containing 41 CEN ISO/TS 13830:2013 manufactured nano-objects (ISO/TS 13830:2013) Trim. 1 Health informatics - Detailed clinical models, characteristics and processes (ISO/TS 42 CEN ISO/TS 13972:2015 13972:2015) Trim. 1 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and 43 CEN ISO/TS 14253-4:2010 measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010) Trim. 1 Health Informatics - Classification of purposes for processing personal health information 44 CEN ISO/TS 14265:2013 (ISO/TS 14265:2011) Trim. 1 Health informatics - Security and privacy requirements of EHR systems for use in 45 CEN ISO/TS 14441:2013 conformity assessment (ISO/TS 14441:2013) Trim. 1 Electronic fee collection - Test procedures for user and fixed equipment - Part 1: 46 CEN ISO/TS 14907-1:2015 Description of test procedures (ISO/TS 14907-1:2015) Trim. 1 Health and safety in welding and allied processes - Laboratory method for sampling fume 47 CEN ISO/TS 15011-6:2012 and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012) Trim. 1 3 din 222 Health and safety in welding and allied processes - Laboratory method for sampling fume 48 CEN ISO/TS 15011-6:2012/AC:2012 and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012) Trim. 1 Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): 49 CEN ISO/TS 15530-1:2013 Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013) Trim. 1 Mechanical vibration and shock - Measurement and evaluation of single shocks 50 CEN ISO/TS 15694:2004 transmitted from hand-held and hand-guided machines to the hand-arm system (ISO/TS 15694:2004) Trim. 1 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: 51 CEN ISO/TS 15874-7:2018 Guidance for the assessment of conformity (ISO/PRF TS 15874-7:2018) Trim. 1 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE- 52 CEN ISO/TS 15875-7:2018 X) - Part 7: Guidance for the assessment of conformity (ISO/PRF TS 15875-7:2018) Trim. 1 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: 53 CEN ISO/TS 15876-7:2018 Guidance for the assessment of conformity (ISO/PRF TS 15876-7:2018) Trim. 1 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl 54 CEN ISO/TS 15877-7:2018 chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877- SM CEN ISO/TS 15877-7:2018 7:2018) Trim. 1 Washer-disinfectors - Part 5: Test soils and methods for demonstrating cleaning efficacy 55 CEN ISO/TS 15883-5:2005 (ISO/TS 15883-5:2005) Trim. 1 Footwear - Critical substances potentially present in footwear and footwear components - 56 CEN ISO/TS 16179:2012 Determination of organotin compounds in footwear materials (ISO/TS 16179:2012) Trim. 1 Footwear - Critical substances potentially present in footwear and footwear components - 57 CEN ISO/TS 16181:2011 Determination of phthalates in footwear materials (ISO/TS 16181:2011) Trim. 1 Footwear - Critical substances potentially present in footwear and footwear components - 58 CEN ISO/TS 16186:2012 Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials (ISO/TS 16186:2012) Trim. 1 Footwear - Critical substances potentially present in footwear and footwear components - 59 CEN ISO/TS 16189:2013 Test method to quantitatively determine dimethylformamide in footwear materials (ISO/TS 16189:2013) Trim. 1 Footwear - Critical substances potentially present in footwear and footwear components - 60 CEN ISO/TS 16190:2013 Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials (ISO/TS 16190:2013) Trim. 1 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat 61 CEN ISO/TS 16491:2012 pump cooling and heating capacity tests (ISO/TS 16491:2012) Trim. 1 4 din 222 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and 62 CEN ISO/TS 16558-2:2015 aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015) Trim. 1 Packaging for terminally sterilized medical devices - Guidance on the application of ISO 63 CEN ISO/TS 16775:2014 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) Trim. 1 Health informatics - Requirements for international machine-readable coding of medicinal 64 CEN ISO/TS 16791:2015 product package identifiers (ISO/TS 16791:2014) Trim. 1 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements 65 CEN ISO/TS 17200:2015 (ISO/TS 17200:2013) Trim.
Load more

Recommended publications
  • ESTA Standards Watch January 2021 Volume 25, Number 1 Table of Contents Events Industry Forum Updates Guidance for England Almost Continuously
    ESTA Standards Watch January 2021 Volume 25, Number 1 Table of Contents Events Industry Forum updates guidance for England almost continuously...........................................................1 WTO Technical Barrier to Trade notifications..........................................................................................................1 United States of America Notification USA/1685.................................................................................................1 Brazil Notification BRA/1115................................................................................................................................ 2 Israel Notification ISR/1182................................................................................................................................. 3 Egypt Notification EGY/280................................................................................................................................. 3 ANSI public review announcements....................................................................................................................... 4 Due 8 February 2021.......................................................................................................................................... 4 Due 15 February 2021........................................................................................................................................ 5 Due 22 February 2021.......................................................................................................................................
    [Show full text]
  • Management and Finance in a “Flat World” Zeszyty Naukowe Wyższej Szkoły Bankowej W Poznaniu 2018, T
    The WSB University in Poznan Research Journal 2018, Vol. 79, No. 2 Management and Finance in a “Flat World” Zeszyty Naukowe Wyższej Szkoły Bankowej w Poznaniu 2018, t. 79, nr 2 Zarządzanie i finanse w „płaskim świecie” redakcja naukowa Wiesława Caputa Wydawnictwo Wyższej Szkoły Bankowej w Poznaniu Poznań 2018 The WSB University in Poznan Research Journal 2018, Vol. 79, No. 2 Management and Finance in a “Flat World” edited by Wiesława Caputa The WSB University in Poznan Press Poznan 2018 Komitet wydawniczy / Editorial Board Przewodniczący / Chair: prof. zw. dr hab. Józef Orczyk Członkowie / Members: dr hab. Władysław Balicki, prof. WSB w Poznaniu, dr hab. Arnold Bernaciak, prof. WSB w Poznaniu, dr Piotr Dawidziak, dr hab. Marek Dylewski, prof. WSB w Poznaniu, dr hab. Sławomir Jankiewicz, prof. WSB w Poznaniu, Grażyna Krasowska-Walczak (dyrektor Wydawnictwa WSB w Poznaniu / Director of the WSB University in Poznan Press), dr Alicja Kaiser, dr hab. inż. Tadeusz Leczykiewicz, prof. WSB w Poznaniu, dr hab. Magdalena Majchrzak, prof. WSB w Poznaniu, Andrzej Małecki (sekretarz / Secretary), dr hab. Ilona Romiszewska, prof. WSB w Poznaniu, dr Łukasz Wawrowski, prof. zw. dr hab. Stanisław Wykrętowicz, dr Maria Zamelska Rada naukowa / Scientific Advisory Board prof. dr hab. Przemysław Deszczyński (Polska), dr hab. Marek Dylewski, prof. WSB w Poznaniu (Polska), prof. dr hab. Beata Filipiak (Polska), dr hab. inż. Tadeusz Leczykiewicz, prof. WSB w Poznaniu (Polska), prof. dr hab. Jan Szambelańczyk (Polska), doc. Ing. Emília Zimková PhD (Słowacja), doc. Ing. Peter Krištofík PhD (Słowacja), prof. Sergiy Gerasymenko DSc (Ukraina), prof. dr Bernt Mayer (Niemcy), prof. dr Franz Seitz (Niemcy), prof. J.
    [Show full text]
  • Progress File
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. ETS 300590:1999 Date published 12 MARCH 1999 European Digital Cellular Telecommunications System (Phase 2); Mobile-Services Switching Centre – Base Station System ( MSC – BSS) Interface – Layer 3 Specification (GSM 08.08) 2. I.S. ETS 300574:1999 Date published 12 MARCH 1999 European Digital Cellular Telecommunications System (Phase 2); Multiplexing and Multiple Access on the Radio Path (GSM 05.02) 3. I.S. EN 60192:1999 Date published 22 OCTOBER 1999 Low-pressure sodium vapour lamps (IEC 60192:1973 (EQV) + A1:1979 (EQV) + A2:1988 (EQV) + A3:1992 (EQV)) 4. I.S. EN 60929:1992/A1:1996 Date published 29 JANUARY 1999 A.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements (IEC 60929:1990/A1:1994 (EQV)) 5. I.S. EN 60192:1993/A4:1999 Date published 22 OCTOBER 1999 Low-pressure sodium vapour lamps (IEC 60192:1973/A4:1993 (EQV)) 6. I.S. EN 60192:1993/A5:1999 Date published 22 OCTOBER 1999 Low-pressure sodium vapour lamps (IEC 60192:1973/A5:1994 (EQV)) 7. I.S. EN 60051-9:1989/A2:1999 Date published 29 JANUARY 1999 Direct acting indicating analogue electrical-measuring instruments and their accessories -- Part 9: Recommended test methods (IEC 60051-9:1988/A2:1995 (EQV)) 8. I.S. EN 55022:1994/A1:1998 Date published 12 NOVEMBER 1999 Limits and methods of measurement of radio disturbance characteristics of information technology equipment (CISPR 22:1993/A1:1995 (EQV)) 9. I.S. EN 60034-4:1999 Date published 29 JANUARY 1999 Rotating electrical machines -- Part 4: Methods for determining synchronous machine quantities from tests (IEC 60034-4:1985 (MOD)) 10.
    [Show full text]
  • ISO 26000:2010 (Traducción Oficial) © ISO 2010 ISO 26000:2010 (Traducción Oficial)
    NORMA ISO INTERNACIONAL 26000 Traducción oficial Official translation Primera edición 2010-11-01 Traduction officielle Guía de responsabilidad social Guidance on social responsibility Lignes directrices relatives à la responsabilité sociétale Publicado por la Secretaría Central de ISO en Ginebra, Suiza, como traducción oficial en español avalada por el Translation Management Group, que ha certificado la conformidad en relación con las versiones inglesa y francesa. Número de referencia ISO 26000:2010 (traducción oficial) © ISO 2010 ISO 26000:2010 (traducción oficial) PDF – Exoneración de responsabilidad El presente fichero PDF puede contener pólizas de caracteres integradas. Conforme a las condiciones de licencia de Adobe, este fichero podrá ser impreso o visualizado, pero no deberá ser modificado a menos que el ordenador empleado para tal fin disfrute de una licencia que autorice la utilización de estas pólizas y que éstas estén instaladas en el ordenador. Al descargar este fichero, las partes implicadas aceptan de hecho la responsabilidad de no infringir las condiciones de licencia de Adobe. La Secretaría Central de ISO rehusa toda responsabilidad sobre esta cuestión. Adobe es una marca registrada de Adobe Systems Incorporated. Los detalles relativos a los productos software utilizados para la creación del presente fichero PDF están disponibles en la sección General Info del fichero. Los parámetros de creación PDF han sido optimizados para la impresión. Se han adoptado todas las medidas pertinentes para garantizar la explotación de este fichero por los comités miembros de ISO. En la eventualidad poco probable de surgir un problema de utilización, sírvase comunicarlo a la Secretaría Central en la dirección indicada a continuación.
    [Show full text]
  • Progress File (Standards Publications)
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 62129:2006 Date published 18 OCTOBER 2008 Calibration of optical spectrum analyzers (IEC 62129:2006 (EQV)) 2. I.S. EN 61076-2-101:2003/A1:2006 Date published 18 OCTOBER 2008 Connectors for electronic equipment -- Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw- locking for low voltage applications (IEC 61076-2-101:2003/A1:2006 (EQV)) 3. I.S. EN 60464-1:1999/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 1: Definitions and general requirements (IEC 60464-1:1998/A1:2006 (EQV)) 4. I.S. EN 60464-3-1:2001/A1:2006 Date published 18 OCTOBER 2008 Varnishes used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 1: Ambient curing finishing varnishes (IEC 60464-3-1:2001/A1:2006 (EQV)) 5. I.S. EN 62329-1:2006 Date published 18 OCTOBER 2008 Heat shrinkable moulded shapes -- Part 1: Definitions and general requirements (IEC 62329-1:2005 (EQV)) 6. I.S. EN 61755-1:2006 Date published 18 OCTOBER 2008 Fibre optic connector optical interfaces -- Part 1: Optical interfaces for single mode non- dispersion shifted fibres - General and guidance (IEC 61755-1:2005 (EQV)) 7. I.S. EN 60454-3-8:2006 Date published 18 OCTOBER 2008 Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3 -8:2006 (EQV)) 8.
    [Show full text]
  • Environmental Management - Vocabulary รายละเอียดใหเปนไปตามมาตรฐาน ISO 14051 : 2011 ขอ 2
    หน้า ๑๑ เล่ม ๑๓๐ ตอนพิเศษ ๑๘๘ ง ราชกิจจานุเบกษา ๒๔ ธันวาคม ๒๕๕๖ ประกาศกระทรวงอุตสาหกรรม ฉบับที่ ๔๕๘๒ (พ.ศ. ๒๕๕๖) ออกตามความในพระราชบัญญัติมาตรฐานผลิตภัณฑ์อุตสาหกรรม พ.ศ. ๒๕๑๑ เรื่อง กําหนดมาตรฐานผลิตภัณฑ์อุตสาหกรรม การจัดการสิ่งแวดล้อม : บัญชีต้นทุนการไหลของวัสดุ : กรอบทั่วไป อาศัยอํานาจตามความในมาตรา ๑๕ แห่งพระราชบัญญัติมาตรฐานผลิตภัณฑ์อุตสาหกรรม พ.ศ. ๒๕๑๑ รัฐมนตรีว่าการกระทรวงอุตสาหกรรมออกประกาศกําหนดมาตรฐานผลิตภัณฑ์อุตสาหกรรม การจัดการสิ่งแวดล้อม : บัญชีต้นทุนการไหลของวัสดุ : กรอบทั่วไป มาตรฐานเลขที่ มอก.14051 - 2556 ไว้ ดังมีรายการละเอียดต่อท้ายประกาศนี้ ทั้งนี้ ให้มีผลตั้งแต่วันประกาศในราชกิจจานุเบกษาเป็นต้นไป ประกาศ ณ วันที่ ๔ พฤศจิกายน พ.ศ. ๒๕๕๖ ประเสริฐ บุญชัยสุข รัฐมนตรีว่าการกระทรวงอุตสาหกรรม มอก. 14051-2556 ISO 14051 : 2011 (E) มาตรฐานผลิตภัณฑอุตสาหกรรม การจัดการสิ่งแวดลอม : บัญชีตนทุนการไหลของวัสดุ : กรอบทั่วไป 0. บทนํา มาตรฐานนี้มีจุดมุงหมายเพื่อเสนอกรอบในการจัดทําบัญชีตนทุนการไหลของวัสดุ ซึ่งเปนเครื่องมือการจัดการที่ ชวยใหองคกรเกิดความเขาใจมากขึ้นเกี่ยวกับการใชวัสดุและพลังงานที่จะมีผลตอไปถึงเรื่องสิ่งแวดลอมและการเงิน และชวยแสวงหาโอกาสที่จะปรับปรุงสิ่งแวดลอมและการเงินจากการเปลี่ยนแปลงวิธีการปฏิบัติงานดังกลาว บัญชีตนทุนการไหลของวัสดุชวยสงเสริมการใชวัสดุและพลังงานใหมีความโปรงใสมากขึ้นโดยผานการพัฒนา แบบจําลองการไหลของวัสดุที่มีการติดตามและวัดปริมาณการไหลของวัสดุและวัสดุคงเหลือขององคกรนับเปน หนวยทางกายภาพ พลังงานสามารถนับรวมเปนวัสดุหรือแยกรายงานเชิงปริมาณตางหากโดยวิธีใดวิธีหนึ่งในบัญชี ตนทุนการไหลของวัสดุ ตนทุนตาง ๆ ที่เกิดขึ้นและ/หรือ ที่เกี่ยวของกับวัสดุและพลังงานตองมีการรายงานเชิง ปริมาณตามการไหลเหลานั้นโดยเฉพาะมาตรฐานเนนการเปรียบเทียบตนทุนที่เกี่ยวของกับผลิตภัณฑและตนทุน
    [Show full text]
  • WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018)
    WORK PROGRAMME of General Directorate of Standardization - ALBANIA (Period 1 July to 31 December 2018) Technical Committee No. 1 “Quality assurance and social responsibility”, 11 standards No. Standard number English title 1. EN ISO 22300:2018 Security and resilience - Vocabulary (ISO 22300:2018) 2. CEN/TS 17159:2018 Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities 3. EN ISO 9004:2018 Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) 4. CWA 17145-2:2017 Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework 5. CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee 6. EN ISO 41011:2018 Facility management - Vocabulary (ISO 41011:2017) 7. EN ISO 41001:2018 Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) 8. IWA 18:2016 Framework for integrated community-based life-long health and care services in aged societies 9. IWA 16:2015 International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport 10. ISO/IEC Guide 17:2016 ISO/IEC Guide 17:2016Guide for writing standards taking into account the needs of micro, small and medium-sized enterprises 11. ISO 37500:2014 Guidance on outsourcing Technical Committee No. 3 “Electrical and electronical materials”, 59 standards No. Standard number English title 1. EN 50288-12-1:2017 Multi-element metallic cables used in analogue and digital communications and control - Part 12-1: Sectional specification for screened cables characterised from 1 MHz up to 2 000 MHz - 1 Horizontal and building backbone cables 2.
    [Show full text]
  • Mandate M/487 to Establish Security Standards Final Report Phase 2
    In assignment of: European Commission DG Enterprise and Industry Security Research and Development Mandate M/487 to Establish Security Standards Final Report Phase 2 Proposed standardization work programmes and road maps NEN Industry P.O. Box 5059 2600 GB Delft Vlinderweg 6 2623 AX Delft The Netherlands T +31 15 2690135 F +31 15 2690207 [email protected] www.nen.nl Netherlands Standardization Institute M/487 has been accepted by the European Standards Organizations (ESOs). The work has been allocated to CEN/TC 391 ‘Societal and Citizen Security’ whose secretariat is provided by the Netherlands Standardization Institute (NEN). Mandate M/487 to Establish Security Standards Final Report Phase 2 Proposed standardization work programmes and road maps REPORT VERSION REPORT DATE Final report 05-07-2013 The copyright on this document produced in the Although the utmost care has been taken with framework of M/487 response, consisting of this publication, errors and omissions cannot be contributions from CEN/TC 391 and other security entirely excluded. The European Committee for stakeholders shall remain the exclusive property of Standardization (CEN) and/or the members of CEN and/or CENELEC and/ or ETSI in any and all the committees therefore accept no liability, not countries. even for direct or indirect damage, occurring due to or in relation with the application of publications issued by the European Committee for Standardization (CEN). Contents Page Executive summary ...........................................................................................................................................
    [Show full text]
  • 2012-01 (Adobe Reader)
    Turinys STANDARTIZACIJA ........................................................................................ 5 IÐLEISTI LIETUVOS STANDARTAI IR KITI LEIDINIAI ............................................ 5 NETEKÆ GALIOS LIETUVOS STANDARTAI IR KITI LEIDINIAI ............................. 15 NETEKSIANTYS GALIOS LIETUVOS STANDARTAI IR KITI LEIDINIAI ................. 19 SIÛLOMA SKELBTI NETEKSIANÈIAIS GALIOS ORIGINALIUOSIUS LIETUVOS STANDARTUS .................................................................................. 20 TARPTAUTINIØ IR EUROPOS ÁSTAIGØ BEI ORGANIZACIJØ STANDARTAI IR KITI LEIDINIAI, KURIUOS DEPARTAMENTAS GAVO GRUODÞIO MËN. ....... 21 TARPTAUTINËS STANDARTIZACIJOS ORGANIZACIJOS STANDARTAI IR KITI LEIDINIAI .................. 21 TARPTAUTINËS ELEKTROTECHNIKOS KOMISIJOS STANDARTAI IR KITI LEIDINIAI ...................... 27 RATIFIKUOTI EUROPOS STANDARTIZACIJOS KOMITETO STANDARTAI IR KITI LEIDINIAI ............... 28 RATIFIKUOTI EUROPOS ELEKTROTECHNIKOS STANDARTIZACIJOS KOMITETO STANDARTAI IR KITI LEIDINIAI .................................................................................................. 32 RATIFIKUOTI EUROPOS TELEKOMUNIKACIJØ STANDARTØ INSTITUTO STANDARTAI IR KITI LEIDINIAI .................................................................................................. 33 REDAKCINË KOLEGIJA Redagavo A. Treèiokaitë Maketavo A. Skomskienë 2012-01-09 © Lietuvos standartizacijos departamentas, 2012 Lietuvos standartizacijos departamento BIULETENIS 2012 Nr. 1 VILNIUS, 2012 Lietuvos standartizacijos departamentas
    [Show full text]
  • Standards Publications
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. 178:1973 Date published 28 SEPTEMBER 2005 Extruded Rigid PVC Corrugated Sheeting 2. I.S. EN 60835-1-2:1993 Date published 1 JUNE 2005 Methods of measurement for equipment used in digital microwave radio transmission systems -- Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations -- Section 2: Basic characteristics (IEC 60835-1-2:1992 (EQV)) 3. I.S. EN 160000:1993/A1:1996 Date published 1 JUNE 2005 Generic Specification: Modular electronic units 4. I.S. EN 61595-1:1999 Date published 1 JUNE 2005 Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use -- Part 1: Format A (IEC 61595-1:1997 (EQV)) 5. I.S. EN 1990:2002+NA:2010 Date published 24 MARCH 2005 Eurocode - Basis of structural design (including Irish National Annex) 6. I.S. EN ISO 14122-4:2004 Date published 23 FEBRUARY 2005 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004) 7. I.S. EN 13877-1:2004 Date published 23 SEPTEMBER 2005 Concrete pavements - Part 1: Materials 8. I.S. EN 13877-2:2004 Date published 23 SEPTEMBER 2005 Concrete pavements - Part 2: Functional requirements for concrete pavements 9. I.S. EN 12843:2004 Date published 4 MARCH 2005 Precast concrete products - Masts and poles 10. I.S. EN 13225:2005 Date published 4 MARCH 2005 Precast concrete products - Linear structural elements 11. I.S. EN 13693:2004 Date published 4 MARCH 2005 Precast concrete products - Special roof elements 12.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 5
    Hrvatski zavod za norme Oglasnik za normativne dokumente 5/2014 listopad, 2014. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 2 Rezultati međunarodne i europske 1.1 Hrvatske norme ............................................................ A3 normizacije razvrstani po predmetnom 1.2 Nacrti hrvatskih norma ............................................... A42 ustroju .................................................A83 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ... A42 3 Popis radnih dokumenata Codex 1.4 Povučene hrvatske norme.......................................... A66 Alimentariusa 1.5 Povučeni nacrti hrvatskih norma ....................................... 4 Obavijesti HZN-a 1.6 Ispravci hrvatskih norma .............................................A79 4.1 Cjenik hrvatskih norma 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku........................................................A82 1.8 Drugi normativni dokumenti 1.9 Opća izdanja HZN-a 1.10 Prijevodi hrvatskih normativnih dokumenata ...............A83 A2 HZN - Oglasnik za normativne dokumente 5/2014 • Rezultati hrvatske normizacije Rezultati hrvatske normizacije HZN/TO 21, Protupožarna i vatrogasna oprema HRN EN 694:2014 en pr 1.1 Hrvatske norme Vatrogasne cijevi – Polukrute cijevi za stabilne Temeljem Zakona o normizaciji (Narodne novine 80/2013) sustave (EN 694:2014) hrvatske norme priprema, izdaje i objavljuje Hrvatski zavod za Fire-fighting hoses – Semi-rigid hoses for fixed norme, na prijedlog tehničkih odbora.
    [Show full text]
  • Your Gateway to International Standards #111
    #111 focusYour gateway to International Standards when disasters strike #111 2 Being prepared : Yucun Village Committee 20 for the unprepared Photo Comment by Thomas Idermark. 4 Social feed Taking a cue from leaders who tweet. ISO focus 6 Mainstreaming disaster 32 28 July-August 2015 management Having the right tools can prepare us for life’s deadliest hazards. 14 Charting the road to resilience How ISO/TC 292 plans to safeguard our : Rory Hunter, AusAID : Rory Hunter, communities. : Asian Development Bank Development : Asian Photo Photo 20 Disasters... be prepared ! The broad panorama of ISO standards. ISOfocus July-August 2015 – ISSN 2226-1095 22 Crisis management ISOfocus, the magazine of the International Organization for Standardization, without borders is published six times a year. You can discover more content on our Website at iso.org/isofocus, or by staying connected with us on : Christian Friis Bach talks UNECE strategy. 28 Microsoft gives users TWITTER FACEBOOK googleplusYoutubeFlickrlinkedin confidence to move Director of Marketing, Communication and Information | Nicolas Fleury to the cloud Head of Communication and Content Strategy | Katie Bird Making a pledge for cloud privacy Editor-in-Chief | Elizabeth Gasiorowski-Denis with ISO/IEC 27018. Editors | Maria Lazarte, Sandrine Tranchard 14 6 32 High standards for Anji County Copy editor and Proofreader | Vivienne Rojas Contributing writers | Xinyu Hua, Dong Li, Clare Naden, Erick Stephens Why standards are the answer Designers | Xela Damond, Pierre Granier, Alexane Rosa to a beautiful China. : MSB Translators | Cécile Nicole Jeannet, Anita Rochedy, Catherine Vincent 40 Protecting digital consumers Subscriptions and back issues Photo Big Brother is watching you… and using If you enjoy ISOfocus, you can subscribe and download the pdf for free, or purchase single hard-copy issues through our Website iso.org/isofocus.
    [Show full text]