DOCSLIB.ORG

To RUST PREVENTION

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
To RUST PREVENTION YOUR COMPLETE GUIDE TO RUST PREVENTION PRODUCT TRAINING GUIDE Restoration & Repair MULTI-PURPOSE FINISHES PRIMERS Hammered, Smooth and Satin No.1 Rustbeater Red Oxide Primer Protects and rejuvenates metal. Kills rust, primes and undercoats • High performance traditional primer • Formulated to offer 8 year • Can be applied directly to rust all in one. • Suitable for both rusty and clean protection with no need for primer or • Can be applied directly onto rust iron and steel • Drying / recoat times reduced an undercoat • Compatible with most topcoats • Special anti-corrosive formulation to 4 hours • Corrosion resistant • Suitable for large and heavily pitted • For interior and exterior use • Contains Anti - Corrosive • Specially formulated to form a areas of rust • Provides a smooth protective pigment giving additional tough barrier that • Colours - Dark Brown and Beige base for overcoating with barrier protection by reacting sheds moisture to provide long • Available in brush and minimal sanding with atmospheric moisture lasting protection aerosol application • Available in 250ml & 500ml Available in Available in cans for • Paintable, Sprayable and • Available in 250ml, 400ml • Available in 250ml, 400ml (aerosol) aerosol application. brush application. Rollable (aerosol), 750ml, 2.5Ltr & 5Ltr & 2.5Ltr Anti Rust Primer Special Metals Primer Hammered Finish - Colours Satin Finish - Colours Prevents metal rusting. Promotes adhesion of topcoat to • Provides a smooth protective stainless steel and all non-ferrous base for overcoating metal surfaces: Aluminium, Galvanised, Black Blue Copper Dark Green Gold Red Silver White Black White • Minimal sanding required Chrome, Brass, and Copper. • Compatible with most top coats • One coat • Available in brush and • Re-paintable after 2 hours Smooth Finish - Colours aerosol application • Colour - Red • Colour - Grey • Available in 250ml Black Blue Cream Copper Dark Green Gold Yellow Red Silver White CONVERTERS Rust Remover Dip Rust Converter s when tin on 3 e The effortless way to y w Rain runs Rain remains u i Provides effective removal of rust. Kurust b l off surface on surface l y d Converts rust to a sound surface in paint & protect metal h o • Brings back to bare metal W ? just 15 minutes. Topcoat • Non-harmful - will not damage No Primer or Hammerite Metal Paint Undercoat paintwork • Ideal for small patches of rust Undercoat Required Primer • Dilute with water to make 10 times • Repaintable after 3 hours Rust Rust the initial volume • Available in 12.5ml pencil, 90ml • SAG RESISTANT • Immerse rusty items overnight & 250ml bottles • EASY TO APPLY Metal Metal • Available in 500ml • QUICK DRYING Conventional Paint Rust Remover Gel • Brush directly on to rusty metal JOB SPECIFIC PRODUCTS • Ideal for vertical and intricate surfaces Direct to Galvanised Garage Door Paint • Available in 100ml blister pack A glossy, smooth finish for non- Specially formulated for both metal ferrous metals such as aluminium, and wooden garage doors. It is ANCILLARY PRODUCTS copper, brass & galvanised steel. highly resistant to flaking and • Can be applied directly onto discolouration and resists runs when Brush Cleaner and Thinners applied to vertical surfaces. non-rusting metals For cleaning brushes and spraying • One coat application • No undercoat required Hammerite Metal Finishes. • No primer required • Available in 6 colours - below • Hammerite Brush Cleaner and Thinners • Available in 6 popular colours • Available in 750ml can be used for cleaning brushes and • Available in 750ml painting equipment • Can be used to thin Hammerite Metal Finishes for spray application Black White Silver Copper Dark Green Blue Black Chestnut Buckingham Oxford Blue Red White • Available in 250ml, 1Ltr & 2.5Ltr 2 Green 3 RUSTPROOFING RUSTPROOFING Waxoyl High Pressure Sprayer Clear Rustproofing Starter Kit • Simple, fast & effective coverage in conjunction • Includes: High pressure with the 2.5Ltr Waxoyl sprayer, extension pressure can probe, 2.5Ltr refillable Clear • Offers a continuous pressured Waxoyl pressure Waxoyl spray with on / off button for can, protective gloves & added control full instructions • Simple pump action to gain desired pressure for application Waxoyl • Includes extension probe for those awkward to reach areas Pressure Can Refill Can • An all purpose reusable high • Available in Black & Clear 5Ltr, pressure vessel container, for 20Ltr & 200Ltr Drum use with the Waxoyl High • A cost effective refill for pressure sprayer 2.5Ltr pressure can • Available in Black & Clear 2.5Ltr • Refillable from 5Ltr refill cans Waxoyl Aerosol Schutz Waxoyl is the most effective rustproofing • Convenient clean & easy • For use with a Schutz treatment and is ideal for protecting insides to use application. coating gun and applied via a of doors, behind sills, internal structures, • Contains slot-in tube for compressor jacking points, engine/battery compartment precise spraying. • Available in Clear and Black and anywhere that water is likely to collect. • Available in Black & 1Ltr. For both professional Rust inhibiting molecules in Waxoyl cut Clear 400ml and DIY use through films of oil, grease and dirt in seconds and cling on to metal surfaces, like iron filings to a magnet. Unlike chemical inhibitors used in ordinary rustproofers, they stay active indefinitely. If the skin is scratched or punctured, Waxoyl creeps back and reseals itself. Waxoyl prevents multi-metal corrosion in today’s cars and ends the winter-time threat of salt corrosion. 4 5 REPAIR & MAINTENANCE REPAIR & MAINTENANCE Tin Aerosol • 1 coat brush application • Convenient clean & easy • Available in 500ml, 1Ltr and to use application 2.5Ltr sizes • Contains slot-in tube for precise spraying Underbody • Available in Black 600ml Seal Underbody Schutz Seal • For use with a Schutz coating gun and applied via a compressor • Available in Black 1 Litre • For both professional and DIY use Underbody Seal Stonechip Protection Aerosol Schutz Underbody Seal provides heavy duty rust Stonechip Shield • Convenient clean & easy to • For use with a Schutz protection for the areas that are most prone Protects stonechip damage, salt, damp and rust. use application coating gun and applied via to abrasion and high impact, from stones, • Remains flexible and will not crack or peel • Available in 600ml. Black, a compressor grit, water and salt. This product is ideal • Easy to apply - Non drip formulation White and Grey finishes • Available in 1Ltr Black finish for wheel arches, floor panels and other • Tough and durable • For both professional and underbody areas, and is easy to apply due • Overpaintable with most top coats DIY use to its non-drip formulation. • Ideal for sills, spoilers and lower body panels With Underbody Seal now having Waxoyl added, you can ensure that these areas of the vehicle will be highly protected. Reduces drumming and road noise if applied inside door panels and under floor panels. 6 7 Metalcare What is the difference between Waxoyl and Underbody Seal? WHEN TO Both products are formulated as high quality rust proofing treatments RECOMMEND killing visible and hidden rust and preventing new rust appearing. Waxoyl is a thinner sprayable formula used on all applications. Underbody Seal offers “Total protection” as a far thicker formulation used in high impact areas for added rust protection and road noise deadening Product Product A thick waxy fluid, saturated with a very powerful rust One coat, heavy duty rust protection for Underbody, wheel killer, Waxoyl chases out moisture to form a flexible arches and other high impact areas. Protects against weatherproof skin that won’t crack, dry or wash off in stones, water, salt... the rain Area of Application Area of Application Sills, chassis, jacking points, engine/battery compartment. Reduces drumming and road noise if applied inside door Lubricates brake linkages, locks, hinges. panels, and under floor. Prevent chassis corrosion. Protects areas of your vehicle most prone to abrasion and ...anywhere that water is likely to collect. impact from stones, grit, water and salt. Keeps mechanisms moving freely by lubrication. Advantages Advantages Protects against stones, water, salt... Protects against stones, water, salt... Proven corrosion resistance. Proven corrosion resistance. Rust-inhibiting molecules cut through films of oil, grease and cling on to metal surfaces, like iron filings to a magnet. Staying active indefinately. If the skin is scratched or Punctured Waxoyl creeps back and reseals itself. Application Application Spray application, Waxoyl High Pressure Sprayer & Shutz Paint on, Aerosol & Schutz coating gun. coating gun. How often should I do it? Dependent on mileage and stone How often should I do it? Dependent on mileage and stone damage under the car, every couple of years. damage under the car, every couple of years. Why does it work? High quality rust inhibitors cut through Why does it work? High quality rust inhibitors cut through rust and dirt, creeping into metal surfaces staying active rust and dirt, creeping into metal surfaces staying active indefinitely. The Waxy layer secures an additional barrier indefinitely. The Waxy layer secures an additional barrier adding further protection. adding further protection. Is it the original formula? Backed with ICI & AkzoNobel Is it the original formula? Backed with ICI & AkzoNobel knowledge and expertise, improved Technology ensures knowledge and expertise, improved Technology ensures the formulation goes from strength to strength. the formulation
Load more

Recommended publications
  • Ahead of the Rest
    2016 2017 Ahead of the Rest Welcome to our proud “Family of Products” Merging Finger Lakes, Castle, Econo, and Echo into one catalog displays www.CastleOctaServices.com America’s broadest line of professional products. Decades of research and development have helped us create a deep, multi-dimensional line. Five reasons why the Castle Group is your best value: PROFITS 1 Since 1967 our trademarked packaging and patented formulas have given exciting new profit opportunities. SUPPORT 2 Service menus, training seminars, POP displays, radio and TV tags, and apparel. FACTORY DIRECT 3 Strategically placed satellite warehouses provide service with no freight and no minimum. Battery HI-TECH Service 4 Product Technical Info is constantly updated. We help you satisfy your “User Right to Know” responsibilities! SAFETY 5 We help you comply with government regulations. The Castle Racing Team started in the early 1970’s with the inception of the Castle Dragon Fire Dragster. Over the years Castle cars and crews have been spotted at drag strips, dirt tracks, and asphalt circuits: 1980’s: J.D. McDuffie uses Castle in his shop and Castle on his #70 Pontiac in the Winston Cup Series. 2002 – 05: Castle unveils its “Racing for Clean Air” Campaign, with Andy Santerre as Racing Team Captain. Andy was NASCAR Busch North Series (BNS) Rookie-of-the-Year in 1993 and NASCAR Busch Series Rookie-of-the-Year in 1998. Santerre would go on to win four straight BNS Points Championships (2002-2005). 2006: Andy retires from racing to concentrate on building race cars and tutoring young drivers as Andy Santerre Motorsports (ASM).
    [Show full text]
  • (12) Patent Application Publication (10) Pub. No.: US 2014/0290802 A1 Morita Et Al
    US 201402908O2A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2014/0290802 A1 Morita et al. (43) Pub. Date: Oct. 2, 2014 (54) SURFACE TREATMENT METHOD AND (30) Foreign Application Priority Data COATING METHOD FOR STEEL MATERIAL, AND METHOD FOR PRODUCING MACHINE Oct. 25, 2011 (JP) ................................. 2011-234331 COMPONENT Publication Classification (51) Int. Cl. (75) Inventors: Haruji Morita, Hanno-shi (JP); Tsuneo C23C 8/42 (2006.01) Tate, Setagaya-ku (JP); Akira C23C 8/80 (2006.01) Shiozawa, Okaya-shi (JP) (52) U.S. Cl. CPC. C23C 8/42 (2013.01); C23C 8/80 (2013.01) (73) Assignees: KOMATSU LTD., Tokyo (JP); USPC ........................................... 148/241; 148/253 NIPPON KAZAI CO.,LTD., Okaya-shi, Nagano (JP); COTEC (57) ABSTRACT CORPORATION, Tokyo (JP) This Surface treatment method comprises a rustproofing step, a rinsing step, and a cleaning step. In the rustproofing step, a (21) Appl. No.: 14/350,724 rustproofing liquid containing orthophosphoric acid and an organic acid is used to perform a rustproofing treatment on the (22) PCT Filed: Sep. 12, 2012 Surface of a steel material. In the rinsing step, a treatment 9 liquid containing an oxoacid salt of a transition metal is used to perform a rinsing treatment on the Surface of the Steel (86). PCT No.: PCT/UP2012/073363 material. In the cleaning step, the Surface of the steel material S371 (c)(1), that has undergone the rinsing step is subjected to a cleaning (2), (4) Date: Apr. 9, 2014 treatment. (a) Shape of film formed by this surface treatment method (SEM, x10,000) Patent Application Publication Oct.
    [Show full text]
  • Corrosion Resistance of Hot-Dip Zn-6%Al-3%Mg Alloy Coated Steel Sheet Used in Automotive Parts
    Corrosion resistance of hot-dip Zn-6%Al-3%Mg alloy coated steel sheet used in automotive parts Masaaki Uranaka, Takeshi Shimizu – Nishhin Steel, Osaka, Japan ABSTRACT RIASSUNTO For the purpose of applying hot-dip Zn-6%Al-3%Mg alloy Con lo scopo di applicare il rivestimento “Zn-Al-Mg” sui coated steel sheet (“Zn-Al-Mg”) to automotive parts, we laminati di acciaio per componenti di autoveicoli, mediante compared and investigated the corrosion resistance of Zn- “immersione a caldo” nel bagno della lega Zn-6%Al- Al-Mg and ordinary materials treated using a conventional 3Mg, gli Autori hanno studiato la resistenza a corrosione rustproofing method (“post-Zn-coated material”) exposed del rivestimento “Zn-Al-Mg” confrontandola con quella to accelerated corrosion test environments. We also dei materiali comuni trattati con metodi convenzionali di collected automotive parts made from Zn-Al-Mg from protezione alla corrosione (rivestimento di Zn) esposti vehicles that had been driven for three to five years in a test ambientali di corrosione accelerata. Sono state Canada to examine corrosion resistance capabilities when anche prelevate parti ricoperte con Zn-Al-Mg da veicoli exposed to actual vehicle environment conditions. We guidati da 3 a 5 anni in Canada, con lo scopo di valutare found that Zn-Al-Mg exhibited better corrosion resistance le prestazioni di resistenza alla corrosione quando sono than post-Zn-coated material, even at portions where the esposte alle condizioni ambientali di esercizio. Gli autori steel substrate was exposed (along cut edges and in bent hanno trovato che il rivestimento Zn-Al-Mg mostra migliore or spot-welded portions).
    [Show full text]
  • FED-STD-297E T SUPERSEDING FED-STD-297D October 1
    Downloaded from http://www.everyspec.com FED-STD-297E t SUPERSEDING FED-STD-297D October 1. 1985 FEDERAL STANDARD RUSTPROOFINGOF COMMERCIAL (NONTACZICAL)VEHICLES ~. Approved fo~ pu~l.icrelease: distribution is unlimited. ,,- -~ -. Downloaded from http://www.everyspec.com FED-STB297E GENERAL SERVICES AIMINISTRATION Washington. D- C. 20301 Rustproofing of Commercial (Nontactical)Vehicles. 1. This Federal Standard is approved by the Commissioner, Federal Supply Service. General Services Administration. for the use of all Federal Agencies. 2. Beneficial comments (recommendations?additions. deletions) ~d my pertinent data which may be of use in improving this document should be addressed to: US Army Tank-Automotive Conmand, A’I’TN:AMSTA-UED, Warren. MI 48397-5000. by using the self-addressed Standardization Document Improvement proposal (.DD~orm 1426) appearti at the end ‘f ‘his ‘ocment ‘r W letter- ii Downloaded from http://www.everyspec.com FRD=STD-Z9’7E FOREWRD This standard establishes requirements for rustproofing of commercial. nontactical, self-propelled and towed vehicles procured for Government use. ------ iii Downloaded from http://www.everyspec.com FED-STW297E Paragraph 1.. SCOPE -------------- ------- 1 2. REFERENCEDDOCUMENTS . ---- ------- 2 2.1 Issues of documents . ---’ ------ 2 2.1.1 Government documents . - - - - . - - - 2 2.1.2 Other Government documents . - . - - -’- 2 3. DEFINITIONS ----------- ------ 3 4. GENERAL REQUIREMENTS .’----- ------- 4 4.1 I?ustproofing---------- ------- 4 .4.2 Identification -------- -------- 4 4.3 Materials ---------- --” ------ 4 4.4 Instructions . ---- -------- 4-5 4.5 Contractor inspection system . - . 5 4.6 Workmanship ---------- ------- 5 5. DETAILED ------------ ------- 5 5.1 Application equipment - . - . - - . - - - - 5 5.1-1 Spray gun ---------- -------- 5 5.1.2 Wands ------------- ------” 6 5.1.3 Spray nozzles . .. ---- -------- 6 5.2 Application procedure .
    [Show full text]
  • Selder & Company Ab
    Page 1 of 3 SELDER & COMPANY AB WORK MANUAL FOR RUSTPROOFING OIL www.selder.com 23.3.2021 The work differs significantly from that with other rustproofing oils. READ CAREFULLY FOR A GOOD RESULT. TABLE OF CONTENTS CLEAN, NON-CORRODED METAL SURFACES TO BE PAINTED .............................................................. 1 CORRODED (RUSTED) METAL SURFACES, TREATMENT WITH OIL AT ROOM TEMPERATURE ................ 1 LINSEED OIL BURNING OF IRON AND STEEL .......................................................................................... 2 MAINTENANCE ....................................................................................................................................... 2 GENERAL................................................................................................................................................. 2 WORKER PROTECTION ........................................................................................................................... 3 SAFETY ..................................................................................................................................................... 3 CLEAN, NON-CORRODED METAL SURFACES TO BE PAINTED are automatically rustproofed by painting with Selder's linseed oil paints. Half of them is a binder which has the same composition and properties as RUSTPROOFING OIL. CORRODED (RUSTED) METAL SURFACES, TREATMENT WITH OIL AT ROOM TEMPERATURE Remove loose rust, paint residue, grease, lichens, algae, etc. The surface can be burned off with a blow torch,
    [Show full text]
  • Circular of the Bureau of Standards No. 80: Protective Metallic Coatings For
    DEPARTMENT OF COMMERCE Circular Bureau of Standards protective metallic coatings for the RUSTPROOFING OF IRON AND STEEL DEPARTMENT OF COMMERCE Circular OF THE Bureau of Standards S. W. STRATTON, Director No. 80 PROTECTIVE METALLIC COATINGS FOR THE RUSTPROOFING OF IRON AND STEEL ISSUED OCTOBER 4, 1919 PRICE, 10 CENTS Sold only by the Superintendent of Documents, Government Printing Office Washington, D. C. WASHINGTON GOVERNMENT PRINTING OFFICE 1919 ) 1 PROTECTIVE METALLIC COATINGS FOR THE RUSTPROOFING OF IRON AND STEEL CONTENTS Page I. Introduction 4 1. Nature of corrosion 4 2 . Principles underlying methods of prevention of corrosion 4 II. Types of coatings and methods of application 6 1. Metallic coatings 6 () Zinc 6 Hot dipping, sherardizing, plating, etc 6 Comparison of coatings 6 () Aluminum 7 (c) Soft, fusible metals 8 Tin, lead, and their alloys 8 (d) Hard metals 8 Copper, nickel, cobalt, and brass 8 2. Oxides and salts of iron 9 (a) Oxides 9 Bower-Barff type 9 Heating with oil, etc 10 ** “ Etching (“ Browning, Bluing, ” etc.) 10 Niter bath n Temper colors 11 Hot oxidizing solutions 1 Miscellaneous n (&) Salts 12 Parker or Coslett process 12 III. Microstructure 12 1. Theoretical microstructure of zinc coatings 12 2. Variations in microstructure of commercial coatings 14 (a) Hot-dipped material 14 ( b ) Sherardized coatings 16 (c) Sprayed coatings 16 ( d Plated zinc coatings 17 3. Significance of structure of coatings 18 IV. Preparation of the surface before coating, and accompanying effects upon the mechanical properties of the steel 20 V. Methods of testing coatings 22 1. Description of methods 22 () Stripping tests 23 () Salt spray 24 2.
    [Show full text]
  • Corrosion Protection Textbook
    Corrosion Protection Textbook Version:3.3 ©2001-2014Inter-IndustryConferenceOnAutoCollisionRepair CPS01-STMAN1-E Thispageisintentionallyleftblank. Textbook CorrosionProtection Contents Introduction..............................................................................................................................7 ObligationsToTheCustomerAndLiability.......................................................................... 7 Module1-CorrosionOriginsAndPrevention.......................................................................13 CausesOfCorrosion...........................................................................................................13 OEMCorrosionProtection..................................................................................................14 PreventingCorrosionDuringRepairs..................................................................................19 ModuleWrap-Up............................................................................................................... 26 Module2-CorrosionProtectionDuringRepairs................................................................... 29 Cleaning..............................................................................................................................29 PartPreparations................................................................................................................. 31 JoiningSurfaces.................................................................................................................. 33 Primers................................................................................................................................36
    [Show full text]
  • Letter Circular 192: Corrosion Resistance of Iron and Steel
    • - - Letter HWG : MGL : LTQ DEPARTMENT OF COMMERCE " " ' \ BDREAU- -Op’S OTfDARDS Circular : •..- ~ ™ • 1&2 ’ ' • ' v • 7 • April 1336 ' • v ; yc-^s. ' COFRQSIQN- RESISTANCE ~CF "IRON AND STEEL . ; : • • •. V ; -a; . The /Lett-er- C.iTC.uliars are designed to answer .specific in- ; quiries and at the same.; t irae- to-'obylate .the necessity "for pre^ paratlon.-of a large number. of letters- on. .the same, subject There Is" no guarantee- it hat .the. 'Information .given In- the Letter r Circulars- ls , correct except as of .the date of issue,. - ilat-erlal of a permanent value appears in- the printed publications of the-, ^ -j ;.- • Bureah. r f 1 r:- 5 r Iv-rmc v. -. Letter. Circulars are not' available sin' the Government Print- ing Office, and the supply at the Bureau of -Standards Is- -limited Many inquiries' are- received- by- this. Bureau -in (regard to the resistance to corrosion of- ."cas.t iron, and of . steel, wrought iron, commercially pure-/ open-hearth iron. 'and copper-bearing -. iron or* steel in sheet - -pipe;,; wir.e-;..;andrsther forms both bare , : . and zinc : coat ed dr otherwise, trust' propled-t, : : Some inquirers request opinions on the suitability of specif - in makes or brands of these -materials , for specific uses. "It -is not the policy .of the -.Bur eau to recommend or. -de- cry specific mates or brands .of any article; Its .tests and. investi gallons deal with ..types of material, not- with, the merits or demerits of a .particular .maker* s product. ;--Thls . Letter - Circular is prepared to put those making such inquiries on types of material in touch with -published data -and opinions on the 'subject.
    [Show full text]
  • Reduction of Cavitation Damage by Surface Treatment
    UNIVERSITY OF MINNESOTA ST. ANTHONY FALLS HYDRAULIC LABORATORY Project Report No. 81 Reduction of Cavitation Damage by Surface Treatment by JOHN F. RIPKEN Distribution 01 this Document is Unlimited Prepared for DAVID TAYLOR MODEL BASIN Department of the Navy Washington, D.C. under Bureau of Ships General Hydromechanics Research Program S-R009-01-01 Office of Naval Research Contract Nonr 710(64) July 1966 Minneapolis, Minnesota Reproduction in whole or in part is permitted for any purpose of the United States Government ~~-~~~~~~~~~~~~~~~~~~~~~~~~----------- ------- -------- --- , .(. I ' ABSTRACT It was rationalized, with limited supporting evidence, that 1 I ~. I most damage due to cavitation stems from cavities which are the consequence of outgassing nuclei growing from fissures in a body's surface. To minimize this damage, it was proposed that body surfaces be treated to reduce the number and activity of these surface faults. Vibratory cavitation damage tests of specimens treated to seal, neutralize, or compress the test surface indicated that these protective measures were inadequate for the severe conditions of a vibratory test. Light shot peening of a work hardening stainless steel prior to cavitation exposure substantially reduced the normal rate of cavitation erosion. i I' < I iii ---------------------------------- ------------ CONTENTS Page Abstract • • • • • • • • II " ,. II ,. • • 'iI'.''''''''·''·- iii List of Illustrations • • • • • ,., .. ", .... "" vii I. INTRODUCTION • • , •• , ••••• ".'.11.·,."." 1 II. THE OUTGASSING OF METALLIC SURFACES AND THE RELATION TO CAVITATION . ,. ,. ,. ,. ,. , • , ,. ,. • ,. ,. , ,. • • .. , • II • • 2 III. SURFACE TREATMENT FOR SUPPRESSION OF OUTGASSING • ,. ,. ,. ; II .. 9 A. General Considerations •• • • • • • • • • • • • • • 9 B. Applied Non-Metallic Films ••••• • • • • • • 10 C. Chemical Treatment of Metallic Surfaces • • • • • 11 D. Physical Treatment of Metallic Surfaces • • -. • • 11 E. Applied Metallic Coatings of Metallic Substrate • 13 IV.
    [Show full text]
  • A Guide to Corrosion Protection
    An analysis of corrosion- A Guide To Corrosion related issues for passenger car and light Protection truck underbody structural components. Auto/Steel Partnership A GUIDE TO CORROSION PROTECTION For Passenger Car and Light Truck Underbody Structural Components Prepared by Light Truck Frame Project Team Auto/Steel Partnership 2000 Town Center, Suite 320 Southfield, Michigan 48075-1123 1999 The following companies are members of the Auto/Steel Partnership: AK Steel Corporation Bethlehem Steel Corporation DaimlerChrysler Corporation Dofasco Inc. Ford Motor Company General Motors Corporation Ispat Inland Inc. LTV Steel Company National Steel Corporation Rouge Steel Company Stelco Inc. U.S. Steel Group, a Unit of USX Corporation WCI Steel, Inc. Weirton Steel Corporation This publication was prepared by: Auto/Steel Partnership Light Truck Frame Project Team 2000 Town Center, Suite 320 Southfield, Michigan, 48075-1123 First Edition, December 1999 This publication is for general information only. The material contained herein should not be used without first securing competent advice with respect to its suitability for any given application. This publication is not intended as a representation or warranty on the part of Auto/Steel Partnership - or any other person named herein - that the information is suitable for any general or particular use or freedom from infringement of any patent or patents. Anyone making use of the information assumes all liability arising from such use. For more information or additional copies of this publication, please contact the Auto/Steel Partnership, 2000 Town Center, Suite 320, Southfield, MI 48075-1123 or phone: 248-945-7777, fax: 248-356-8511, web site: www.a-sp.org Copyright 1999 Auto/Steel Partnership.
    [Show full text]
  • Alsheettm Alsheet
    www.nipponsteel.com Steel Sheet ALSHEET TM Hot-dip aluminum-coated steel sheets ALSHEETTM 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan U034en_02_202004pU034en_02_202004f Tel: +81-3-6867-4111 © 2019, 2020 NIPPON STEEL CORPORATION Introduction Manufacturing Process Overall manufacturing Blast furnace TM process ALSHEET is a cold-rolled steel that has been hot-dipped in an aluminum/silicon alloy. It Acid Pickling offers the attractive surface of processed steel sheet that simultaneously affords some of Converter the features of aluminum, such as resistance to corrosion, attractive appearance, coupled Cold Rolling with superior heat resistance and heat reflection, cold-rolled steel’s mechanical attributes Continuous Casting and other physical characteristics. Hot-dip We have been manufacturing hot-dip aluminum-coated steel sheets under the name Hot Rolling aluminum plating “ALSHEETTM” since July 1961, and it has been widely adopted thanks to its superior features, such as for vehicle mufflers (silencers), toasters, and gas cookers. In recent years, there have been calls for the development of materials to succeed Cooling equipment stainless steel sheets to cope with exhaust gas restrictions, and inexpensive materials Post-Processing TM in order to cut costs, and accordingly the demand for ALSHEET with improved heat Hot-dip Aluminum Plating The quality and shape of the aluminum- resistance performance has grown in these fields as well. Process coated sheet are improved by the We have recently developed further improvements to our products in terms of heat <in order of process> skin pass and tension leveler, and post-processing is applied to the add resistance, strength at high temperature, colorfastness, and corrosion resistance, and corrosion resistance and enhance paint have extended our product lineup to meet the ever-diversifying needs of today’s market.
    [Show full text]
  • Notice of Solicitation Gs-2020-4 for the Furnishing
    NOTICE OF SOLICITATION GS-2020-4 FOR THE FURNISHING AND DELIVERY OF One (1) 4-Wheel Drive 18,000 lb GVWR Cab, Utility Body and Accessories; AND/OR One (1) 37,600 lb GVWR Cab and Chassis with (8) Cubic Yard Dump Body; AND/OR Three (3) 16K Tilt Deck Equipment Trailers; AND/OR One (1) Rubber Track Open Cab Excavator January 2020 CONTENTS NOTICE OF SOLICITATION ....................................................................................................... 1 OFFER ............................................................................................................................................ 2 SCOPE OF WORK AND AWARD ............................................................................................... 7 CERTIFICATION OF COMPLIANCE FOR FINAL PAYMENT ............................................. 15 SPECIFICATIONS ....................................................................................................................... 16 GENERAL TERMS AND CONDITIONS FOR GOODS AND SERVICES ............................. 26 NOTICE OF SOLICITATION SEALED OFFERS will be received up to and publicly opened at 2:00 p.m. (Hawaiʻi Standard Time) on Thursday, February 06, 2020, at the Department of Water Office of the County of Kauaʻi (“Department of Water” or “Department”), 4398 Pua Loke Street, Līhuʻe, Kauaʻi, Hawaiʻi, for the furnishing and delivery of GS-2020-4 One (1) 4-Wheel Drive 18,000 lb GVWR Cab, Utility Body and Accessories; AND/OR One (1) 37,600 lb GVWR Cab and Chassis with (8) Cubic Yard Dump Body; AND/OR Three (3)
    [Show full text]