DOCSLIB.ORG

Cleaning 339-364

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Cleaning 339-364 CLEANING INDEX INFANTE ULTRASONICS L&R HCS-200 ULTRASONIC FIREARM CLEANING SYSTEMS HANDGUN CLEANING SYSTEM Ultrasonic Vibration Cleans & Bore Cleaning Rods .............. 345-347 Parts Brushes/Cloths ............. 354-355 Lubricates Guns & Gun Parts Gets Dirty CLEANING in Minutes Guns Clean Bore Guides/Rod Stops ...........344-345 Rod Attachments .................347-351 In Minutes; Infante cleaners are built to be both Perfect For Chamber Rods & Brushes ......... 352-353 Solvents/Oils/Greases ............ 355-364 compact and uncommonly powerful Small Shops Or tabletop cleaning systems that are also S6 Handgun Model The Hobbyist Cleaning Kits ....................340-344 Special Purpose Brushes .......... 353-354 easy on your budget. The S6 Handgun model will clean and lubricate two full-size auto- loading pistols or a revolver with a barrel up Cleaning Patches .....................352 Ultrasonic Cleaners ................339-340 to 6" OR loose firearm parts like AR-15 bolt/ Clean and lubricate up to two semi-automatics, or one 6" re- carrier assemblies, silencers, cartridge cases, volver, in less than 20 minutes with powerful, ultrasonic cleaning reloading dies, and much more. The larger S9 action. Billions of tiny, scrubbing bubbles get cleaning solution into Rifle model has a faster process with higher S9 Rifle Model the nooks and crannies that are hard to reach by hand. Field strip the output than the S6 for cleaning multiple guns and has more length firearm, place it in the wire basket, turn on the Ultrasonic Cleaner to accommodate longer gun parts. It'll clean and lubricate pistols, and you’re free to do other things while the cavitating action gets L&R QUANTREX® ULTRASONIC submachine guns, and rifle components up to 19" in length. For parts everything super-clean! An ideal solution for the small shop where 5 7 3 3 SPECS: Exterior Dimensions: 12 /8" x 6 /8" x 9 /4". Tank Dimensions: 11 /4" longer than 19", drop them in diagonally then turn them part around only a few firearms need to be cleaned and for hobbyists who want CLEANING & LUBRICATION SYSTEMS x 6" x 6". Tank Capacity: 6 Quarts. Input: 117V, 50/60 Hz, 135 Watts. Peak to do overlapping halves. This is the most economical choice for to give their guns a professional cleaning. Also great for cleaning cleaning longer gun parts without spending more money on a dedi- powder residue from empty cases before reloading. Output: 400 Watts. Output Frequency: 43 KHz. CLEANERS ULTRASONIC Fast, Hands-Free, Microscopic Cleaning for Dirty Guns & Parts cated long gun cleaner. You can even divide the tank into two sepa- 1 3 #515-317-002 Q-210 Non-Ammoniated Gun Clean. Input: 117V Dimensions: 12 /2"(31.75cm) x 6 /4" (17.14cm) rate compartments and clean in the front basket, leaving the rear 3 Add superfast, ultrasonic cleaning to your shop; save yourself a Pkg, 5A1642C86 . $ 1782.99 Peak Output: 95 Watts TankDimensions : 11 /4" (29.8cm) x 6" open for the lubrication setup. Both systems have an all-stainless (15.2cm) x 4" (10.2cm) lot of time and make money in the process. Ultrasonic sound waves, #515-317-211 Q-210 Ultrasonic Cleaner, only, 7 steel cabinet with sound insulation, plus stainless steel tank, lube Tank Capacity: 4 /8 Quarts Output Frequency: 43 KHz ab plus CA2 Heat create the proven, aggressive action that’s a must 5A1149M87 . 1199.99 pan, and covers. The baskets allow liquids to conveniently drain back for thorough gun cleaning. Incremental, consistent heat along with into the tank while examining parts. An extra heat boost enables fast SPECS: Tanks, lid, auxiliary pan and wire basket are stainless steel. Sys- QUANTREX Q-650 TAC PAC SYSTEM - For simultaneous cleaning billions of tiny scrubbing bubbles remove powder fouling, lead and startup time without no cold spots. Both units come with a sample tem includes: (1) HCS-200 Ultrasonic Cleaner, (1) Auxiliary pan, (1) Wire and lubricating tacti- basket, (1) lid, (1) Gallon (3.80l) Handgun Lubricating Solution, (2) 8 oz. jacketed bullet fouling, light rust, dirt and grease; better, faster and of Infante's Sonic TonicTM cleaning solution concentrate (add water) cal weapons. Includes (0.23kg) Concentrated Handgun Cleaning Solution, (1) pair latex gloves, easier than ever before. CA2 Heat eliminates the need to use ammo- and Sonic LubeTM. ab niated cleaning solutions to remove copper fouling. To clean most the Q-650 Ultrasonic (1) 0.4 oz. (11.8ml) tube Synthetic Gun Oil, (1) Cleaning Brush, (1) cotton firearms, only the most basic field strip is needed. Drop the parts Cleaner, Timer and #100-035-067 S9 Handgun, Subgun & Rifle Cleaning cleaning pad. System, 3B00EKM . $ 1525.50 into the basket, turn on the Ultrasonic cleaner and you’re free to Heater, (1) Q-650 Aux- #515-000-006 HSC-200 Ultrasonic Cleaning System, do other jobs while the cavitating action in the tank gets everything iliary Pan, (2) Q-650 #100-034-999 S6 Handgun & Firearm Parts Cleaning 5A543K45 . $ 600.99 System, 3B00AJK . 625.50 microscopically clean in as short a time as 7 to 10 minutes. The Gun Accessory Baskets, #515-000-007 Replacement Cleaning Solution For Cleaning Packages have everything you need to start cleaning guns (1) Cover, (4) Gallons, #100-035-068 Sonic Tonic Concentrate 1 Gal., HSC-200, 8 oz, 5A4H70 . 5.29 more efficiently, including auxiliary pans and baskets to speed up non-ammoniated, 3B00ERI . 72.00 Q-650 Gun Cleaning #515-000-005 Lubricating Solution, 5A52G81 . 61.99 the already fast ultrasonic process, plus solutions that attack fouling L&R Gun Cleaning Package shown and provide superb lubrication. All the units are heavy duty, built for Concentrate (makes constant use in a busy shop or department. Not recommended for 32 gallons of ready-to-use solution), plus (8) Gallons of L&R Ultra- use with ammoniated solutions. We offer three units, each with a sonic Gun Lubricating Solution (ready-to-use). 3 3 1 3 different capacity, so you can find just the right size for your needs. SPECS: Exterior Dimensions: 21 /4" x 13 /4" x 13 /4". Tank Dimensions: 19 /4" 3 1 50 All will easily take handguns; the bigger models will take everything, x 11 /4" x 6 /2". Tank Capacity: 23 Quarts. Input: 117V, /60 Hz, 410 Watts. GUN CLEANING STATION Peak Output: 1230 Watts. Output Frequency: 42 KHz. up to a shotgun or rifle by leaving the barrel sticking out. Not recom- All The Features You Want & Need ULTRASONIC mended for use with ammoniated cleaning solutions. ab #515-650-003 *Q-650 Non-Ammoniated Gun Cln For Big Cleaning Jobs SPECS: Tanks, lids, accessory baskets and auxiliary pans are stainless steel, Pkg, 5A4027B49 . .$ 4398.99 CLEANING SOLUTION & OIL outer shell is vinyl-coated steel. Fully transistorized with automatic fre- Self-contained, solvent, gun cleaning quency control, 30 minute timers, pilot lights, drains. GUN CLEANING SOLUTION (NON-AMMONIATED) - Contains a station. Sealed pump, 115v/60 Hz; flexible Advanced Formulas powerful solvent surfactant to lift fouling off. Concentrated for- spray nozzle; 16 gallon base drum and a Power Away Dirt & Fouling; mula makes 10 gallons of solution. Rinse with water, follow with lu- filtration system that cleans and recycles Lubricates, Fights Corrosion brication. Odorless, non-toxic and biodegradable. Non-regulated the solvent. Crud is separated out and de- by OSHA 49 CFR. posited in a disposable bag. Uses any good, Powerful, fast-acting cleaning SPECS: 1 gallon (128 fl. oz./3.8 L) net contents. petroleum-based solvent. ab and lubricating solutions are specially #515-000-004 Non-Ammoniated Gun Clean Solution, SPECS: 16 gauge, welded steel. 26" (66cm) formulated for today’s ultrasonic 5A70L43 . $ 77.99 x 17" (43.2cm) x 7" (17.8cm) deep tub. 34" gun cleaning systems to thoroughly (86.4cm) high - lid closed. Shipped in two boxes. clean, condition, and protect your Q-210 Gun Cleaning Package shown GUN LUBRICATING SOLUTION - Blended, specialty lubricants in #112-026-000 PW-26 Parts Washer, 2A766I67 . $ 847.99 firearms. Safe for all metal surfaces, a mild solvent base give uniform dry lubrication. Odorless, non- including carbon steel, aluminum, titanium, and stainless steel. QUANTREX Q-210 SYSTEM - Includes the Q-210 Ultrasonic Clean- toxic and biodegradable. Non-regulated by OSHA 49 CFR. Use Won’t harm bluing, Parkerizing, anodizing, or most paints. Envi- er, Timer and Heater, (1) Q-210 Auxiliary Pan, (1) Q-210 Accessory full strength. ronmentally safe, non-toxic, ammonia-free, and biodegradable Basket, (1) Gallon, non-ammoniated, L&R Gun Cleaning Concen- SPECS: 1 gallon (128 fl. oz./3.8 L) net contents. with minimal odor, so both products can be safely used right in the trate and (2) Gallons of L&R Ultrasonic Gun Lubricating Solution. #515-000-005 Lubricating Solution, 5A52G81 . $ 61.99 shop. Cleaning Solution penetrates petroleum-based greases and oils and removes carbon fouling, dirt, grime, and powder residue to NH 909™ leave the metal completely clean. Gets into nooks and crannies for Non-Caustic, Non-Hazardous, Safe Pre- thorough, deep-down, “in the pores” cleaning without completely Cleaner For Perfect Gun Preparation disassembling firearm. Economical, concentrated formula: mix 1 gallon of solution with 9 gallons of water to produce 10 gallons of TANK SOLVENT Designed particularly for use on guns prior to cleaner. Water-displacing Oil with “Thin Coat” technology drains a slightly oily coating to protect against rust. Almost odorless. Stable bluing, or any metal refinishing job. Removes all quickly from parts without puddling and leaves a microscopic layer Dissolves Grime, Crud, In Scrub Or Soak Tanks and non-corrosive. Extremely slow evaporation; stays in your tank. grease, traces of buffing compounds, dirt. Oper- of long-lasting corrosion protection. Ultra-low friction coefficient Removes easily with Dicro-Clean 909™; won’t mess up future bluing/ helps minimize wear on moving parts for smooth firearm operation High grade, petroleum-based solvent formulated ates at 180˚ F.
Load more

Recommended publications
  • Ahead of the Rest
    2016 2017 Ahead of the Rest Welcome to our proud “Family of Products” Merging Finger Lakes, Castle, Econo, and Echo into one catalog displays www.CastleOctaServices.com America’s broadest line of professional products. Decades of research and development have helped us create a deep, multi-dimensional line. Five reasons why the Castle Group is your best value: PROFITS 1 Since 1967 our trademarked packaging and patented formulas have given exciting new profit opportunities. SUPPORT 2 Service menus, training seminars, POP displays, radio and TV tags, and apparel. FACTORY DIRECT 3 Strategically placed satellite warehouses provide service with no freight and no minimum. Battery HI-TECH Service 4 Product Technical Info is constantly updated. We help you satisfy your “User Right to Know” responsibilities! SAFETY 5 We help you comply with government regulations. The Castle Racing Team started in the early 1970’s with the inception of the Castle Dragon Fire Dragster. Over the years Castle cars and crews have been spotted at drag strips, dirt tracks, and asphalt circuits: 1980’s: J.D. McDuffie uses Castle in his shop and Castle on his #70 Pontiac in the Winston Cup Series. 2002 – 05: Castle unveils its “Racing for Clean Air” Campaign, with Andy Santerre as Racing Team Captain. Andy was NASCAR Busch North Series (BNS) Rookie-of-the-Year in 1993 and NASCAR Busch Series Rookie-of-the-Year in 1998. Santerre would go on to win four straight BNS Points Championships (2002-2005). 2006: Andy retires from racing to concentrate on building race cars and tutoring young drivers as Andy Santerre Motorsports (ASM).
    [Show full text]
  • (12) Patent Application Publication (10) Pub. No.: US 2014/0290802 A1 Morita Et Al
    US 201402908O2A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2014/0290802 A1 Morita et al. (43) Pub. Date: Oct. 2, 2014 (54) SURFACE TREATMENT METHOD AND (30) Foreign Application Priority Data COATING METHOD FOR STEEL MATERIAL, AND METHOD FOR PRODUCING MACHINE Oct. 25, 2011 (JP) ................................. 2011-234331 COMPONENT Publication Classification (51) Int. Cl. (75) Inventors: Haruji Morita, Hanno-shi (JP); Tsuneo C23C 8/42 (2006.01) Tate, Setagaya-ku (JP); Akira C23C 8/80 (2006.01) Shiozawa, Okaya-shi (JP) (52) U.S. Cl. CPC. C23C 8/42 (2013.01); C23C 8/80 (2013.01) (73) Assignees: KOMATSU LTD., Tokyo (JP); USPC ........................................... 148/241; 148/253 NIPPON KAZAI CO.,LTD., Okaya-shi, Nagano (JP); COTEC (57) ABSTRACT CORPORATION, Tokyo (JP) This Surface treatment method comprises a rustproofing step, a rinsing step, and a cleaning step. In the rustproofing step, a (21) Appl. No.: 14/350,724 rustproofing liquid containing orthophosphoric acid and an organic acid is used to perform a rustproofing treatment on the (22) PCT Filed: Sep. 12, 2012 Surface of a steel material. In the rinsing step, a treatment 9 liquid containing an oxoacid salt of a transition metal is used to perform a rinsing treatment on the Surface of the Steel (86). PCT No.: PCT/UP2012/073363 material. In the cleaning step, the Surface of the steel material S371 (c)(1), that has undergone the rinsing step is subjected to a cleaning (2), (4) Date: Apr. 9, 2014 treatment. (a) Shape of film formed by this surface treatment method (SEM, x10,000) Patent Application Publication Oct.
    [Show full text]
  • Adams Arms Operations Manual PLEASE READ the INSTRUCTIONS and WARNINGS in THIS MANUAL with EXTREME ATTENTION BEFORE USING THIS FIREARM ADAMS ARMS OPERATIONS MANUAL
    CLEAN. COOL. RELIABLE. PISTON PERFORMANCE WWW.ADAMSARMS.NET Adams Arms Operations Manual PLEASE READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL WITH EXTREME ATTENTION BEFORE USING THIS FIREARM ADAMS ARMS OPERATIONS MANUAL STATE WARNINGS Certain states have laws that their own specified warning notices, in larger-than-normal type, be conspicuously included by the manufacturer, distributor, or retail dealer with firearms to be sold in that state. Adams Arms sells its products in compliance with applicable laws and regulations. Because our products may be sold in these states, we must include it: CALIFORNIA: WARNING “Children are attracted to and can operate firearms that can cause severe injuries or death. Prevent child access by always keeping guns locked away and unloaded when not in use. If you keep a loaded firearm where a child obtains and improperly uses it, you may be fined or sent to prison.” CONNECTICUT: “UNLAWFUL STORAGE OF A LOADED FIREARM MAY RESULT IN IMPRISONMENT OR FINE.” FLORIDA: “IT IS UNLAWFUL, AND PUNISHABLE BY IMPRISONMENT AND FINE, FOR ANY ADULT TO STORE OR LEAVE A FIREARM IN ANY PLACE WITHIN THE REACH OR EASY ACCESS OF A MINOR UNDER 18 YEARS OF AGE OR TO KNOWINGLY SELL OR OTHERWISE TRANSFER OWNERSHIP OR POSSESSION OF A FIREARM TO A MINOR OR A PERSON OF UNSOUND MIND.” MAINE: “ENDANGERING THE WELFARE OF A CHILD IS A CRIME. IF YOU LEAVE A FIREARM AND AMMUNITION WITHIN EASY ACCESS OF A CHILD, YOU MAY BE SUBJECT TO FINE, IMPRISONMENT OR BOTH. KEEP FIREARMS AND AMMUNITION SEPARATE. KEEP FIREARMS AND AMMUNITION LOCKED UP.
    [Show full text]
  • Surface Finishing Treatments
    Tel.: 1-800-479-0056 Fax: 1-888-411-2841 www.aspenfasteners.com [email protected] Surface finishing treatments Surface finishing treatments can have a significant impact on the properties of fasteners, making them more suitable for specific applications. Most typically finishes are applied to improve durability (wear resistance and corrosion resistance) and/or for decorative purposes. Fasteners that are to be used in conditions where they are exposed to high physical stress levels, corrosive elements, or extreme temperatures may benefit greatly from plating/coating. Anodizing An electrolytic passivation process that forms a thin, transparent oxide layer that protects the metal substrate. Anodizing modifies the surface of the metal to produce a decorative, durable, corrosion and wear resistant finish. Unlike plating or painting, the oxide finish becomes integrated with the metallic substrate, so it cannot chip or peel and minimally alters the dimensional aspects of the part. The physical properties of this oxide layer also provides excellent adhesion for secondary processes like colouring and sealing. The term "anodizing" reflects the process whereby the metal part to be finished forms the anode of an electric circuit immersed in an electrolyte bath. The current in the circuit causes ionic oxygen to be released from the electrolyte and combine with the metallic substrate of the finished part. Black Oxide Black Oxide is a low cost conversion coating where oxidizing salts are used to react with the iron in steel alloys to form magnetite (Fe304), the black oxide of iron. The result is an attractive and durable matte black finish. While steel is the usual substrate, other materials including stainless steel, alloy, copper, brass, bronze, die cast zinc, and cast iron react equally well.
    [Show full text]
  • 772-3540 Fax: (208) 772-3530 ITEM DESCRIPTION PRICE CLEANER LUBRICANT PRESERVATIVE ITEM# DESCRIPTION PRICE BFCLP1212 CLP, 12Oz
    165 13386 International Parkway Jacksonville, FL 32218 Tel: (800) 347-1200 Fax: (904) 741-5404 www.break-free.com 9323 N. Government Way, Suite 217 Hayden Lake, ID 83835 Tel: (208) 772-3540 Fax: (208) 772-3530 ITEM DESCRIPTION PRICE www.alangator.com CLEANER LUBRICANT PRESERVATIVE ITEM# DESCRIPTION PRICE BFCLP1212 CLP, 12oz. Aerosol 7.85 TRIMAG™ COUPLER Joins three Ruger 10/22 factory magazines with its patent-pending three-way connector for lightning-fast reloads, easier handling BFCLP410 CLP, 4 fl. oz., Squeeze Bottle 4.65 and improved grip. It clamps the magazines together – no glue or adhesive LUBRICANT PRESERVATIVE needed. Made in USA. TRIMAG Ruger Magazines NOT Included 5.85 BFLP410 4 fl. oz., Squeeze Bottle 5.05 POWDER BLAST BFGC1612 16 oz., Aerosol 7.25 BORE FOAM BFBCF312 3 fl. oz., Aerosol 7.50 ALASKA GAME BAGS, INC 425 N. Spring St. Sparta, TN 38583 Tel: (931) 525-3626 Fax: (931) 858-1734 www.alaskagamebags.com ITEM# DESCRIPTION PRICE DEER, ANTELOPE, SHEEP BAGS 911 William Leigh Drive AGBDSC448 4 - pack 48" Rolled Quarter Bags 8.15 Tullytown, PA 19007 AGBADS1272 Deer Sock 72" Rolled Carcass Bag 6.25 Tel: (215) 949-9944 MOOSE, ELK, CARIBOU BAGS www.commandarms.com AGBMEC460 4 Pack 60" Rolled Quarter Bags 16.30 ITEM # DESCRIPTION PRICE AGBATB3672 36”x72”, 7oz. Duck Canvass Carcass Bag, Seam- less bottom & bag closure ties 16.80 GRIPS 24”x30”, 7oz. Duck Canvass Quarter Bag, Seam- AGBATB2430 CAAFVG1 2 Position Folding Grip Ltd Availability 15.00 less bottom & bag closure ties 6.25 CAAFVG3 3 Position Folding Vertical Grip w/Cmptment
    [Show full text]
  • Firearms Journal
    Canadian September/October 2016 Firearms Journal MARCH/APRIL 2018 Fully Committed On All Fronts CAnAdA’s NatIonal FirearMs AssociAtIon PM 40009473 Return undeliverable to: Canadian Firearms Journal, P.O. Box 49090, Edmonton, Alberta T6E 6H4 TYPE 81 ULTIMATE RED RIFLE The Type 81 is a non-restricted gas operated, magazine fed, semi- automatic rifle chambered in 7.62x39. Developed by the Chinese military as a replacement for their Type 56 rifles (license produced AK-47). Was designed to have a longer service life, higher accuracy, improved durability and better controllability in full auto firing. It entered into service in 1981 and is still in limited use today. Features a short-stroke gas piston operating system, two position gas regulator, bolt hold open device and thumb operated fire selector. Barrel and gas system is fully chrome • IMPORTS lined. Comes with two 5/30 magazines and choice of fixed or folding • ONLINE RETAIL stock. All parts and components are 17’ new production. Taking pre-orders • DISTRIBUTION for the second shipment, expected this spring. Pre-order bonus of free spare magazine and sling ($58 value). Priced at just $999. Shown with TACTICALIMPORTS.CA [email protected] optional quadrail. 2 w w w . n f a . c a March/April 2018 800.994.6223 CANADIAN March/April 2018 FIREARMS JOURNAL COLUMNS 46 32 ONE GUN'S STORY SHOT SHOW: 4 The Full Circle Cooey HANDLOADING PRODUCTS ON THE COVER MIKE KELLY THOMAS C. TABOR 2018 SHOT Show 50 38 5 TEAM NFA NANUK FROM THE EDITOR’S DESK The Quiet Eye – MAKING THE CASE SHOT Show & More
    [Show full text]
  • Corrosion Resistance of Hot-Dip Zn-6%Al-3%Mg Alloy Coated Steel Sheet Used in Automotive Parts
    Corrosion resistance of hot-dip Zn-6%Al-3%Mg alloy coated steel sheet used in automotive parts Masaaki Uranaka, Takeshi Shimizu – Nishhin Steel, Osaka, Japan ABSTRACT RIASSUNTO For the purpose of applying hot-dip Zn-6%Al-3%Mg alloy Con lo scopo di applicare il rivestimento “Zn-Al-Mg” sui coated steel sheet (“Zn-Al-Mg”) to automotive parts, we laminati di acciaio per componenti di autoveicoli, mediante compared and investigated the corrosion resistance of Zn- “immersione a caldo” nel bagno della lega Zn-6%Al- Al-Mg and ordinary materials treated using a conventional 3Mg, gli Autori hanno studiato la resistenza a corrosione rustproofing method (“post-Zn-coated material”) exposed del rivestimento “Zn-Al-Mg” confrontandola con quella to accelerated corrosion test environments. We also dei materiali comuni trattati con metodi convenzionali di collected automotive parts made from Zn-Al-Mg from protezione alla corrosione (rivestimento di Zn) esposti vehicles that had been driven for three to five years in a test ambientali di corrosione accelerata. Sono state Canada to examine corrosion resistance capabilities when anche prelevate parti ricoperte con Zn-Al-Mg da veicoli exposed to actual vehicle environment conditions. We guidati da 3 a 5 anni in Canada, con lo scopo di valutare found that Zn-Al-Mg exhibited better corrosion resistance le prestazioni di resistenza alla corrosione quando sono than post-Zn-coated material, even at portions where the esposte alle condizioni ambientali di esercizio. Gli autori steel substrate was exposed (along cut edges and in bent hanno trovato che il rivestimento Zn-Al-Mg mostra migliore or spot-welded portions).
    [Show full text]
  • Annual Firearms Manufacturing and Export Report 2018 Final
    ANNUAL FIREARMS MANUFACTURING AND EXPORT REPORT YEAR 2018 Final* MANUFACTURED PISTOLS REVOLVERS TO .22 417,806 TO .22 271,553 TO .25 25,370 TO .32 1,100 TO .32 30,306 TO .357 MAG 113,395 TO .380 760,812 TO .38 SPEC 199,028 TO 9MM 2,099,319 TO .44 MAG 42,436 TO .50 547,545 TO .50 37,323 TOTAL 3,881,158 TOTAL 664,835 RIFLES 2,880,536 SHOTGUNS 536,126 MISC. FIREARMS 1,089,973 EXPORTED PISTOLS 333,266 REVOLVERS 21,498 RIFLES 165,573 SHOTGUNS 27,774 MISC. FIREARMS 6,126 * FOR PURPOSES OF THIS REPORT ONLY, "PRODUCTION" IS DEFINED AS: FIREARMS, INCLUDING SEPARATE FRAMES OR RECEIVERS, ACTIONS OR BARRELED ACTIONS, MANUFACTURED AND DISPOSED OF IN COMMERCE DURING THE CALENDAR YEAR. PREPARED BY LED 01/28/2020 REPORT DATA AS OF 01/28/2020 PISTOLS MANUFACTURED IN 2018 PAGE 1 OF 128 PISTOL PISTOL PISTOL PISTOL PISTOL PISTOL PISTOL RDS KEY LICENSE NAME STREET CITY ST 22 25 32 380 9MM 50 TOTAL 99202128 BOWMAN, FORREST WADE 29 COLLEGE RD #8B-2 FAIRBANKS AK 0 5 0 0 0 1 6 99202850 DOWLE, PAUL GORDON 1985 LARIX DR NORTH POLE AK 0 0 0 0 0 1 1 99203038 EVERYDAY DEFENSE 1591 N KERRY LYNN LN WASILLA AK 0 1 0 0 1 0 2 SOLUTIONS LLC 99202873 HAWK SHOP LLC 2117 S CUSHMAN ST FAIRBANKS AK 2 0 1 0 4 11 18 99202968 HOBBS, THOMAS CHARLES 3851 MARIAH DRIVE EAGLE RIVER AK 0 0 0 6 1 0 7 16307238 ANDERSONS GUNSMITHING 4065 COUNTY ROAD 134 HENAGAR AL 4 0 2 0 0 0 6 AND MACHINING LLC 16307089 BARBOUR CREEK LLC 200 SELF RD EUFAULA AL 0 0 0 1 14 0 15 16307641 BOTTA, PAUL EDWARD 10040 BUTTERCREME DR MOBILE AL 0 2 0 0 0 0 2 S 16303219 CHATTAHOOCHEE GUN 312 LEE RD 553 PHENIX CITY
    [Show full text]
  • Complete 2021-22 NJ Hunting & Trapping Digest
    2021–22 Hunting and Trapping Season Dates and Limits • FREE New Jersey Hunting Trapping August 2021 & Digest NEW Regulation Tables A Summary of Regulations and Wildlife Management Information NJFishandWildlife.com 150yd. Rifl e Range VISIT OUR INDOOR & OUTDOOR FVISIT OUR INDOOR & OUTDOOR F IREARM & ARCHERY RANGES IREARM & ARCHERY RANGES OPEN 7 DAYS AOPEN TO THE PUBLIC—MEMBERSHIPS AVAILABLE WEEK! OPEN TO THE PUBLIC—MEMBERSHIPS AVAILABLE WE BUY USED GUNS! LARGEST GUN STORE IN NJ! AMMO • GUN SAFES • CLOTHING & FOOTWEAR • KNIVES • HUNTING SUPPLIES RENTALS • ARCHERY PRO SHOP • PARTIES • GIFT CARDS • LESSONS WE BUY USEDWE GUNS! BUY USED GUNS! A VALID NJ FIREARMS ID CARD IS REQUIRED A VALID NJ FIREARMS ID CARD IS REQUIRED FOR ALL GUN PURCHASES FOR ALL GUN PURCHASES VISIT OUR INDOOR & OUTDOOR FIREARM & ARCHERY RANGES OPEN TO THE PUBLIC – MEMBERSHIP AVAILABLE 1535 Route 539, LittleOPEN Egg 7 DAYS Harbor, A WEEK!OPEN NJ 7 DAYS A WEEK! HANDGUNS—RIFLES—SHOTGUNS—MUZZLELOADERS—BOWS—CROSSBOWS 609-296-4080HANDGUNS—RIFLES—SHOTGUNS—MUZZLELOADERS—BOWS—CROSSBOWS • www.shootersnj.com HANDGUNS - RIFLES - SHOTGUNS - MUZZLELOADERS - BOWS - CROSSBOWS OVER 1,000 FIREARMS ON DISPLAY! Contents Bill Klimas Bill Sussex County Welcome to Hunting in NJ ����������������������������������������������������������������� 7 Deer Regulation Changes �������������������������������������������������������36 General License Information Deer Archery Season ���������������������������������������������������������������36 Mentored Hunting Program �������������������������������������������������������������6
    [Show full text]
  • Sumter City-County Planning Commission June 24, 2020
    Sumter City-County Planning Commission June 24, 2020 OA-20-02, Fabricated Metal Products in the Agricultural Conservation (AC) District (County) I. THE REQUEST Applicant: David Merchant, Merchant Ironworks Request: To amend the Sumter County – Zoning and Development Standards Ordinance to include Fabricated Metal Products (SIC 34) as a special exception use in the Agricultural Conservation (AC) zoning district. Article 3, Section 3.n.4. Special Exception uses in the AC District; Article 5, Section 5.b.2. Enumeration of Certain Hazardous and/or Potentially Disruptive Land Development Activities, and Section 5.b.3. Special Design Review Criteria for Applicable items in 5.b.2. to establish finite review criteria for uses classified under Fabricated Metal Products (SIC 34). II. BACKGROUND This is an Ordinance Amendment request by Mr. David Merchant. The purpose of the request is to amend the text of the Sumter County – Zoning & Development Standards Ordinance (herein referred to as the Ordinance) to allow Fabricated Metal Products, Except Machinery and Transportation Equipment (SIC Code 34) within the Agricultural Conservation (AC) District as a Special Exception Use. Special Exception uses are reviewed and approved by the Sumter City- County Zoning Board of Appeals through a public hearing process. Historical Context The Applicant is the owner and operator of Merchant Ironworks located at 3215 Beulah Cuttino Rd. in Sumter County (TMS# 221-00-01-012), an Agricultural Conservation (AC) zoned parcel. The business has operated at this location since 2008. As per business licensing information from the Sumter City-County Business License Department, Merchant Ironworks is currently licensed as a Welding Contractor (SIC 1799).
    [Show full text]
  • An Introduction to Corrosion Science and Engineering FOURTH EDITION
    CORROSION AND CORROSION CONTROL An Introduction to Corrosion Science and Engineering FOURTH EDITION R. Winston Revie Senior Research Scientist CANMET Materials Technology Laboratory Natural Resources Canada Herbert H. Uhlig Former Professor Emeritus Department of Materials Science and Engineering Massachusetts Institute of Technology A JOHN WILEY & SONS, INC., PUBLICATION CORROSION AND CORROSION CONTROL CORROSION AND CORROSION CONTROL An Introduction to Corrosion Science and Engineering FOURTH EDITION R. Winston Revie Senior Research Scientist CANMET Materials Technology Laboratory Natural Resources Canada Herbert H. Uhlig Former Professor Emeritus Department of Materials Science and Engineering Massachusetts Institute of Technology A JOHN WILEY & SONS, INC., PUBLICATION Copyright © 2008 by John Wiley & Sons, Inc. All right reserved Published by John Wiley & Sons, Inc., Hoboken New Jersey Published simultaneously in Canada No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978)750-4470, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.com/go/permission. Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifi cally disclaim any implied warranties of merchantability or fi tness for a particular purpose.
    [Show full text]
  • Henkel Surface Treatment Selector Guide Interactive Brochure Scroll Through and Click on the Underlined IDH Number of the Product to Go to the Product Detail Page
    Redline® : Opt + 2 Industrial Solutions Henkel Surface Treatment Selector Guide Interactive Brochure Scroll through and click on the underlined IDH number of the product to go to the product detail page. Can’t find what your looking for? then click here to do a product search. www.henkelna.com/industrial | 1 At Henkel Corporation, we provide solutions to industry’s biggest challenges. We are dedicated to understanding the markets we serve This selector guide will aid you in choosing the right solution and product for a wide range of common industrial challenges. For additional and developing partnerships that stand the test of time. information on Henkel products, please contact us at 1.800.562.8483. For more than 100 years, Henkel has been the leading supplier of state-of-the-art metal pretreatment technologies. As the world’s leading supplier of chemical pretreatments for light metals, plastics and steel, Henkel sets high standards for corrosion protection, TABLE OF CONTENTS paint adhesion and environmental safety. PREFERRED PRODUCTS AND PROCESSES To help you compete in today’s challenging manufacturing environment, our chemists and engineers work in partnership with our Preferred Alkaline Cleaners .........................................................................................................................................2-3 customers to improve design, assembly, productivity and profitability. Whether you need consultation on our products’ performance or a turnkey process design, Henkel provides solutions. Nanoceramics Process
    [Show full text]