DOCSLIB.ORG

Microinjection & Transfection 2016-2017

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Microinjection & Transfection 2016-2017 WORLD PRECISION INSTRUMENTS Instrumenting scientific ideas Microinjection & Transfection 2016-2017 Come see us at The Allied Genetics 2016 Conference • July 13-17 • Booths # 623 & 816/818 Everything you need for Microinjection Microinjection processes use either metal microinjection Recently, WPI introduced its customizable Microinjection needles or glass micropipettes to inject small liquid System with everything you need to get started. We can volumes. For example, genetic material may be inserted help you customize your system with many options and into a living cell, a drug introduced into an eye or brain, microinjection system accessories. The basic system or fluid injected into a muscle. Typically, microinjection includes: is performed under a microscope. A stereotaxic frame l Microinjection pump like the PV820 Pneumatic setup may be required. PicoPump l LED lighted microscope base with a PZMIII Stereo Microscope and an articulating mirror l Micromanipulator l Many accessories WPI offers a variety of pumps along with special syringes, stereotaxic frames, glass capillaries and needles. The setup you choose depends on the size of your microinjection aliquots, the volume to be injected and the size of needle or glass tip you choose. In addition, we offer an electroporator for transfection procedures. Whether you are working with Danio rerio (zebrafish), Xenopus, Drosophila or Caenorhabditis elegans, we can help you customize a microinjection system for your application. Options for Customizing Your System INJECTOR ✱ PV820 Pneumatic PicoPump with Hold Pressure • PV830 Pneumatic PicoPump with Hold Designed to simplify intracellular injection and a variety Microprocessor- The versatile Pressure and Vacuum of other micro in jec tion tasks, WPI's PicoPumps use UMP3 controlled injector uses • Nanoliter2010 carefully regulated air pres sures for se cur ing cells and injecting them with fluid. Injected volumes range from Nanoliter 2010 microsyringes to UltraMicroPump • UMPIII picoliters to nanoliters. uses direct pis ton deliver picoliter dis place ment. volumes. MICROSCOPE ✱ PZMIII-MI Microscope PZMIII-MI LED Lighted with lighted base and Microscope Base with articulating articulating mirror mirror and variable light intensity. Dual reflection lens/mirror system PZMIII Precision Stereo PZMIII Precision • provides transmitted brightfield/ Stereo Zoom Zoom Microscope psuedo-darkfield illumintation. Microscope, available in binocular and trinocular (shown). For more information, see www.wpiinc.com/microinjection PULLERS PUL-1000 is a microprocessor controlled horizontal puller for making glass micropipettes or microelectrodes used in ✱ PUL1000 Microprocessor- intracellular recording, microperfusion or microinjection. controlled 4-Step It offers programmable sequences of up to four steps micropipette puller with heating, force, movement and cooling time. This • PMP-102 Programmable allows graduated cycles for applications like patch clamp Multipipette Puller recording. MANIPULATOR ✱ M3301 Manual Weighing just 550 grams, Micromanipulator the M3301 is a well- • KITE Manual built micro manip u la tor M4C Microscope Micromanipulatorr that outsells all others Stage Adapter • DC3001 Motorized world wide for high preci- Micromanipulator sion experiments where • SN-PCZ-50 Miniature Piezo mag ni fi ca tion is in the range Micromanipulator with of up to 250×. controller • M4C Microscope Stage Adapter LIGHTS ✱ Z-LITE-186 Fiber optic illuminator with (500186) Bifurcated Light Guides • ROF-UV LED ringlight for UV • LED-Lite Modular LED Light Source with Exchangeable Z-LITE-186 LEDS • 504134 LED Ring light The 504134 Ring Light Adapter has 72 LEDs. Max opening: 61mm. ACCESSORIES • Nanofil Microliter syringes Use the E2XX jars MicroFil is a flexible and • MicroFil for backfilling to store up to 30 reusable glass needle as small glass needles micropipettes, filled as 36 gauge for backfilling • Glass capillaries or unfilled, up to micropipettes. • Pipetters three inches in length. • MicroTip pre-pulled pipettes • E2XX Micropipette Storage Jar • 801566/801963 Vacuum Z-MOLDS Microinjection and Pump for use with the PV830 Transplantation Molds (4 per kit) are • Fluorodish Optical glass designed for zebrafish research. The molds bottom dishes are turned up-side down and placed in liquid agarose gel and are easily removed • M10 or M-3 Manipulator base once it has solidified. Pipette the embryos • Z-MOLDS Microinjection and into the grooves. The embryos self-align. Translplantation Molds • Many surgical instruments CUY21-EDIT-II Electroporator is a combination square wave and ELECTROPORATOR exponential wave form generator with single and dual pulse modes. It • CUY21-EDIT-11 has single and dual pulse modes for square and decaying pulses. You Electroporator can set pulses emitting constant current (mA) as well as voltage (V) and generate multiple waveforms. It offers built-in resistance measurement and a measured output recorder. Pneumatic PicoPumps Repeatable microinjection in volumes ranging from picoliters to nanoliters Designed to simplify intracellular injection and a variety of other pressure, and suction are adjusted indepen dent ly by control knobs and micro in jec tion tasks, WPI's PicoPumps use carefully regulated air pres- in di ca tor gauges on the front panel. Injection pressure is controlled by a sures for se cur ing cells and injecting them with fluid. Injected volumes 20-turn regulator on the front panel. A built-in timing circuit allows precise range from picoliters to nanoliters. Separate ports supply positive and control of the amount of time that the injection pressure is applied to the negative pressure—pos i tive pressure for high-pressure ejection, and output port. Time intervals can range from 10 seconds down to 10 ms suction for supporting the cell or for filling the pipette from the tip. A or less, depending on the eject pressure setting. The injection pressure second pressure port maintains a low positive “holding” pressure to interval can be triggered manually on the front panel, by footswitch, or by the injecting pipette between injection pulses, to prevent fluid uptake computer controlled TTL pulse. A 5-volt moni tor output provides a logic- through capillary action or diffusion. Timing, ejection pressure, holding level pulse for your computer or other moni tor ing device. The most recognized picopump in the world! For a complete list of pre-pulled micropipettes, see µTips™, or call us with your special requirements. PV830 — Eject pressure, Hold pressure, and Vacuum are all available, Eject and Hold pressure by a precision timing circuit that controls a controlled by separate reg u la tors on the front panel. Eject pressure solenoid valve. Vacuum is used to fill pipettes from the tip or to secure supplies a high-pressure pulse for injecting fluid. Hold pressure, which a floating cell during microinjection. Vacuum is regulated the same way, is not sufficient to cause fluid ejection, is used to prevent back filling of by a 20-turn knob on the front panel. Vacuum may be switched from the pipette by capillary action or diffusion when the solenoid is inactive. regulated vacuum to atmo sphere by using the pneumat ic toggle on the Pressure in the injection pipette is auto mat i cal ly switched between front panel. Vacuum can also be routed to the eject port. Each PicoPump is supplied with a 5430-ALL kit that includes two PicoNozzles and tubing to connect the holders to the pressure and vacuum ports. SYS-PV820 PicoPump w/ hold pressure SYS-PV830 PicoPump w/ hold pressure and vacuum Specify line voltage All PicoPumps require external vacuum source — see below. OPTIONAL ACCESSORIES 3260 Foot Switch 1 2932 Rack Mount Kit, 3 ⁄ 2-in. high (PV820) 1 2933 Rack Mount Kit, 5 ⁄4-in. high (PV830) 5430-10 PicoNozzle Kit (MPH6S for 1.0 mm pipette & 5-ft tubing assembly) 5430-12 PicoNozzle Kit (MPH6S for 1.2 mm pipette & 5-ft tubing assembly) New PicoNozzle Kit 5430-ALL (included) 5430-15 PicoNozzle Kit (MPH6S for 1.5 mm pipette & 5-ft tubing assembly) allows micropipettes to be securely 5430-20 PicoNozzle Kit (MPH6S for 2.0 mm pipette & 5-ft tubing assembly) mount ed in micropositioners for stable 5430-ALL PicoNozzle Kit (for 1.0, 1.2, 1.5, and 1.65 mm pipettes & 5-ft tubing assembly) 75122-110 Replacement Gaskets for PicoNozzle — 1.0 mm, green, package of 10 axial air delivery. Because air enters the 75122-210 Replacement Gaskets for PicoNozzle — 1.2 mm, black, package of 10 pipette axially, lateral whipping during 75122-310 Replacement Gaskets for PicoNozzle — 1.5 mm, blue, package of 10 injection is eliminated. 75122-410 Replacement Gaskets for PicoNozzle — 1.65 mm, red, package of 10 MPH6S Micropipette Holder (specify 1.0, 1.2, 1.5 or 2.0 mm) MPH6R Micropipette Holder (specify 1.0, 1.2, 1.5 or 2.0 mm) 3316 Replacement Input Kit ORDER TOLL-FREE: 866-606-1974 (U.S. only) 2 World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com PV820 offers separate regulated Hold and Ejection pressure, used timing has been set. Although reg u lat ed vac u um is not provid ed in this mod- to maintain a low pressure in the pipette between injections to prevent el, suction can be provid ed by con nect ing a vacu um source to the vacu um unwanted fluid uptake by capillary action or dif­fu sion. A pre ci sion timing port on the rear panel. Suction is then available through the pressure ports. circuit switches from Eject pressure to Hold pressure auto mat i cal ly, once PICOPUMP SPECIFICATIONS PV820 PV830 PRESSURE PRESSURE INPUT 0 to 150 psi 0 to 150 psi PRESSURE OUTPUT 0.3 to 90 psi * 0.3 to 90 psi PULSE WIDTH (10-turn dial) 10 ms to 10 s in Timed Mode 10 ms to 10 s in Timed Mode REGULATOR ACCURACY 0.1% (20-turn dial) * 0.1% (20-turn dial) * REGULATOR REPEATABILITY 0.05 psi * 0.05 psi * GAUGE ACCURACY 3% at full scale * 3% at full scale * 1 1 INPUT CONNECTOR Quick Connect ( ⁄4 in.
Load more

Recommended publications
  • Laboratory Equipment Reference Sheet
    Laboratory Equipment Stirring Rod: Reference Sheet: Iron Ring: Description: Glass rod. Uses: To stir combinations; To use in pouring liquids. Evaporating Dish: Description: Iron ring with a screw fastener; Several Sizes Uses: To fasten to the ring stand as a support for an apparatus Description: Porcelain dish. Buret Clamp/Test Tube Clamp: Uses: As a container for small amounts of liquids being evaporated. Glass Plate: Description: Metal clamp with a screw fastener, swivel and lock nut, adjusting screw, and a curved clamp. Uses: To hold an apparatus; May be fastened to a ring stand. Mortar and Pestle: Description: Thick glass. Uses: Many uses; Should not be heated Description: Heavy porcelain dish with a grinder. Watch Glass: Uses: To grind chemicals to a powder. Spatula: Description: Curved glass. Uses: May be used as a beaker cover; May be used in evaporating very small amounts of Description: Made of metal or porcelain. liquid. Uses: To transfer solid chemicals in weighing. Funnel: Triangular File: Description: Metal file with three cutting edges. Uses: To scratch glass or file. Rubber Connector: Description: Glass or plastic. Uses: To hold filter paper; May be used in pouring Description: Short length of tubing. Medicine Dropper: Uses: To connect parts of an apparatus. Pinch Clamp: Description: Glass tip with a rubber bulb. Uses: To transfer small amounts of liquid. Forceps: Description: Metal clamp with finger grips. Uses: To clamp a rubber connector. Test Tube Rack: Description: Metal Uses: To pick up or hold small objects. Beaker: Description: Rack; May be wood, metal, or plastic. Uses: To hold test tubes in an upright position.
    [Show full text]
  • Product Overview
    Product Overview Electrophysiology 2020 • Patch Clamp Amplifier • Electrophysiological Accessories • Two Electrode Voltage Clamp • Electrical Shielding • Automated Patch Clamp Systems • Pipette & Electrode Manufacturing • Data Acquisition Boards • Software www.heka.com For over 45 years HEKA has designed and manufactured sophisticated instrumentation and software for biomedical and industrial research applications. Through the years, HEKA has achieved an unparalleled reputation for precision and quality. Medical, pharmaceutical and industrial research facilities world-wide rely on HEKA ingenuity for their discoveries. While there have been many changes in research, instrumentation, and software, our commitment to bring innovative technology to our customers remains constant. HEKA is a select group of engineers, biomedical researchers, and computer scientists who pride themselves on the quality of HEKA products. HEKA offers complete pre- and post-sales technical support, and takes care of each customer personally. In every way, HEKA provides solutions. HEKA Elektronik GmbH is proud to be part of the Smart Ephys umbrella. Together with our other Harvard Bioscience, Inc. brands Multi Channel Systems GmbH and Warner Instruments we offer complete solutions for electrophysiology. You will find the high-quality products and service that you know and trust from each of the individual companies, but you can get information on all products, complete set-ups (e.g. patch clamp rigs), and product consultation from one source. Please check out the Smart Ephys website and contact your local sales representative with any questions. Buy Online The Smart Ephys one-stop-shop concept applies to online orders as well. Quickly order consumables and accessories via our webshop. Expedite equipment acquisition by generating your own quote for your purchasing department.
    [Show full text]
  • Laboratory Safety Regulations Humboldt State University • Department of Chemistry Lower Level
    Version 3.0 September 28,, 2015 Laboratory Safety Regulations Humboldt State University • Department of Chemistry Lower Level FAILURE TO OBSERVE SAFETY PRECAUTIONS MAY RESULT IN IMMEDIATE DISMISSAL FROM THE LABORATORY AND ASSOCIATED LECTURE! ​ ​ A. General 1. First­Aid kits are available in the following locations: Main stockroom—SA 569; Organic Stockroom—SA 566; Analytical/Inorganic/Physical Lab—SA 369. Band­aids for minor cuts are available in the main stockroom. 2. Notify your instructor as soon as possible after all accidents and/or injuries regardless of their severity. If you need medical treatment, you will be promptly taken to the Student Health Center. In case of accident after 5:00 pm or on weekends, call the campus police at 911. ​ ​ 3. Perform no unauthorized experiments. 4. Horseplay, pranks, and other acts of mischief are strictly prohibited and will result in immediate dismissal from the laboratory. 5. Work with chemicals only after you have learned about their potential hazards. Then, proceed with caution. 6. There are always risks when working with chemicals so work cautiously and defensively. Safety Data Sheets (SDS) are available in the Main Stockroom and are also available on the Web. 7. You are required to determine the hazards of any chemical before you use the chemical. For example, ask yourself the ​ following: ​ ● What are the greatest risks from using this chemical? How can I minimize these risks? ● In what form is this chemical most hazardous? Least hazardous? ● How can I arrange my work so that the chemical is used in the least hazardous manner? ● If I have to transport this chemical, what is the safest way to do so? ● How would I respond if the chemical were spilled? 8.
    [Show full text]
  • Laboratory Equipment Used in Filtration
    KNOW YOUR LAB EQUIPMENTS Test tube A test tube, also known as a sample tube, is a common piece of laboratory glassware consisting of a finger-like length of glass or clear plastic tubing, open at the top and closed at the bottom. Beakers Beakers are used as containers. They are available in a variety of sizes. Although they often possess volume markings, these are only rough estimates of the liquid volume. The markings are not necessarily accurate. Erlenmeyer flask Erlenmeyer flasks are often used as reaction vessels, particularly in titrations. As with beakers, the volume markings should not be considered accurate. Volumetric flask Volumetric flasks are used to measure and store solutions with a high degree of accuracy. These flasks generally possess a marking near the top that indicates the level at which the volume of the liquid is equal to the volume written on the outside of the flask. These devices are often used when solutions containing dissolved solids of known concentration are needed. Graduated cylinder Graduated cylinders are used to transfer liquids with a moderate degree of accuracy. Pipette Pipettes are used for transferring liquids with a fixed volume and quantity of liquid must be known to a high degree of accuracy. Graduated pipette These Pipettes are calibrated in the factory to release the desired quantity of liquid. Disposable pipette Disposable transfer. These Pipettes are made of plastic and are useful for transferring liquids dropwise. Burette Burettes are devices used typically in analytical, quantitative chemistry applications for measuring liquid solution. Differing from a pipette since the sample quantity delivered is changeable, graduated Burettes are used heavily in titration experiments.
    [Show full text]
  • Proceedings of the Indiana Academy of Science
    m A Simple Apparatus for the Study of Phototropic Responses in Seedlings. Geo. N. Hoffer. The purpose of this apparatus is to determine the minimum (piantity of light, acting as a lateral stimulus, that will produce a curvature response in seedlings of various kinds as well as some of the fungi, such as Fhj/comyccs and PUoJxAuh. Any kind of light may lie used, Iiut in the comparative studies I use direct sunlight. The <iuantity of liglit is regulated by opening and closing an iris diaphragm with various-sized apertures for definite lengths of time. The apparatus is made from a microscope carrying case. As shown in the photograph, Fig. 1, the outside attachments are the drawtube and rack and pinion of a microscope removed from the base and attached to one side of the box. Tlie tube works through a hole in the side of the box. The opening is made light proof by a velvet collar. Fig. III. \(\ glued to the rim and held to the tube of the scope by rubber I)ands. Into anotlu'r hole is Gttid a hemispheric, revolving iris diaphragm. Fig. Ill, I. This is on the adjacent side of the box close to the microscope and en the same level with the objective of the microscope. A mirror is at- tached to the box to reflect light directly into it through the iris and onto the plant. A micrometer eyepiece in tlie microscope is the index by which all of the readings are made. The illumination for the readings is supplied by the light which passes through the bottle, Fig.
    [Show full text]
  • EXTRACTING DNA (DNA = Deoxyribonucleic Acid) from COMMON FOOD INGREDIENTS
    ACTIVITY: EXTRACTING DNA (DNA = deoxyribonucleic acid) FROM COMMON FOOD INGREDIENTS DNA Extraction – Onion method #1: Ingredients: Isopropyl alcohol* Ice/water bath ½ onion distilled water ¼ tsp sodium chloride (table salt) (1.5 g) 1 mL ¾ tsp sodium hydrogen carbonate (baking soda) (5 g) 4 mL 1 tsp name brand dish soap or liquid detergent 5 mL *traditional experiments recommend 99%, but this is not readily available; 70% is readily available from most pharmacies Materials: 1 paring knife 1 cutting board Ice bucket or container for ice solution Measuring cups or 125 mL and 250 mL Erlenmeyer flasks Strainer or funnel Paper towels or small coffee filters Glass stirring rods or wooden stir sticks Clear bowls or test tubes 1. Place isopropyl alcohol in ice/water bath or in the freezer to cool thoroughly. 2. Buffer solution: 125 mL of water (distilled water, if available) ½ cup 1 mL (1.5 grams) of sodium chloride (table salt) ¼ tsp 4 mL (5.0 grams) baking soda (sodium hydrogen carbonate) ¾ tsp 5 mL of good quality liquid laundry detergent, 1 tsp Make the buffer solution by pouring placing all the ingredients into a clean 250 mL Erlenmeyer flask or clean container. Chill the buffer solution by placing the flask in a larger beaker filled with crushed ice and water. Note: buffer solutions are used in this lab for several reasons. • the saltiness and acidity (pH) of the solution is very close to that in living things; as a result, the DNA will like to dissolve into this solution. • the detergent is added to help break down cell walls in the onion cells.
    [Show full text]
  • Laboratory Equipment AP
    \ \\ , f ?7-\ Watch glass 1 Crucible and cover Evaporating dish Pneumatlo trough Beaker Safety goggles Florence Wide-mouth0 Plastic wash Dropper Funnel flask collecting bottle pipet Edenmeyer Rubber stoppers bottle flask € ....... ">. ÿ ,, Glass rod with niohrome wire Scoopula (for flame re,sting) CruoiNe tongs Rubber ubing '1 ,v .... Test-tube brush square Wire gau ÿ "\ file Burner " Tripod Florence flask: glass; common sizes are 125 mL, 250 mL, 500 .d Beaker: glass or plastic; common sizes are 50 mL, mL; maybe heated; used in making and for storing solutions. 100 mL, 250 mL, 400 mL; glass beakers maybe heated. oÿ Buret: glass; common sizes are 25 mL and 50 mL; used to Forceps: metal; used to hold or pick up small objects. Funnel: glass or plastic; common size holds 12.5-cm diameter measure volumes of solutions in titrafions. Ceramic square: used under hot apparatus or glassware. filter paper. Gas burner: constructed of metal; connected to a gas supply Clamps" the following types of clamps may be fastened to with rubber tubing; used to heat chemicals (dry or in solution) support apparatus: buret/test-tube clamp, clamp holder, double buret clamp, ring clamp, 3-pronged jaw clamp. in beakers, test tubes, and crucibles. Gas collecting tube: glass; marked in mL intervals; used to 3: Clay triangle: wire frame with porcelain supports; used to o} support a crucible. measure gas volumes. Glass rod with nichrome wire: used in flame tests. Condenser: glass; used in distillation procedures. Q. Crucible and cover: porcelain; used to heat small amounts of Graduated cylinder: glass or plastic; common sizes are 10 mL, 50 mL, 100 mL; used to measure approximate volumes; must solid substances at high temperatures.
    [Show full text]
  • NI\5/\ I1\L111'1 'I\L IIII \Lll' 11'1' '11\L IIIII '1'1 L\Ll NF02634 NASA CONTRACTOR REPORT 166375
    NASA CONTRACTOR REPORT 166375 NASA-CR-166375 19820023067 ,, Algal Culture Studies Related to a Closed Ecological Life Support System (CELSS) 1 J. '" ,,, '- ./ R. Radmer O. OllInger A. Venables E. Fernandez tt3~~n'l copy l:~ 1 1 1982 ~ I I U\NGL EY R::-SEARlt-' ctNTER L:3RARY N!\SA Ht..~',oTON, V'RGIN'A CONTRACT NAS2-10969 July 1982 NI\5/\ I1\l111'1 'I\l IIII \lll' 11'1' '11\l IIIII '1'1 l\ll NF02634 NASA CONTRACTOR REPORT 166375 Algal Culture Studles Related to a Closed Ecologlcal Llfe Support System (CELSS) R. Radmer o. 0111nger A. Venables E. FeYJ1 andez Martln Marletta Laboratorles 1450 South Rolllng Road Ba1tlmore, MD 21227 Prepared for Ames Research Center under Contract NAS2-10969 NI\S/\ National Aeronautics and Space Administration Ames Research Center Moflett Field California 94035 TABLE OF CONTENTS Page I. INTRODUCTION 1 II. DESCRIPTION OF THE CONSTANT CELL DENSITY APPARATUS (CCDA) FOR CONTINUOUS CULTURE OF ALGAE 2 III. CCDA OPERATING CHARACTERISTICS 4 IV. EXCRETION OF ALGAL BY-PRODUCTS 6 V. NITROGEN UTILIZATION AND EXCRETION 7 VI. FINALE 10 VII. REFERENCES 11 APPENDIX A - ANALYTICAL PROCEDURES A-I APPENDIX B - SAMPLE PREPARATION B-1 BIBLIOGRAPHY OF CELSS REPORTS C-l I. INTRODUCTION During the past year, we have studied several aspects of the con­ tinuous culture of the green alga Scenedesmus obliquus (Gaffron strain D3). Our primary goals were to 1) set up and maintain continuous cultures, 2) monitor the cultures to determine culture stability, biomass produc­ tion, and by-product production, and 3) determine the efficiency of nitro­ gen utilization and the possible production of nitrogen by-products, such as N20.
    [Show full text]
  • Guide to Laboratory Safety (Chemical Hygiene Plan)
    Thomas Jefferson University Guide to Laboratory Safety (Chemical Hygiene Plan) Developed by: Thomas Jefferson University Department of Environmental Health and Safety In conjunction with: The Laboratory Safety Committee Of the University Safety Committee Thomas Jefferson University Updated 2013 Review Verification Form This Guide to Laboratory Safety has been developed by the Department of Environmental Health and Safety at Thomas Jefferson University to serve as the Chemical Hygiene Plan required by the Occupational Safety and Health Administration’s (OSHA) Laboratory Standard promulgated in 1990. The intention is to provide guidelines and procedures to everyone associated with laboratories and laboratory related activities. Annual Chemical Safety Review Verification by Environmental Health Officer Verification Date Signature 2013 2014 2015 2016 2017 Annual Biosafety Review Verification by Biosafety Officer Verification Date Signature 2013 2014 2015 2016 2017 Annual Overall Review Verification by Director of Environmental Health and Safety Verification Date Signature 2013 2014 2015 2016 2017 Preface The Guide to Laboratory Safety has been developed at Thomas Jefferson University (Jefferson) as the Chemical Hygiene Plan required by the Occupational Safety and Health Administration (OSHA) Laboratory Standard promulgated in 1990. The intention is to provide guidelines and procedures to everyone associated with laboratories and laboratory related activities. The goal is to create and encourage a safer work environment. This laboratory guide can be used as a valuable resource in answering the concerns of employees and students who work and train at Jefferson. Laboratory employees and students are expected to work and act in a safe, professional manner, implementing the information contained in this guide. Safety awareness and practices then become valuable assets that are taken to any workplace, making research, clinics, and hospitals safer working environments for everyone.
    [Show full text]
  • Organic Chemistry Laboratory Experiments for Organic Chemistry Laboratory 860-121-02 Mw 1:00-4:00
    ORGANIC CHEMISTRY LABORATORY EXPERIMENTS FOR ORGANIC CHEMISTRY LABORATORY 860-121-02 MW 1:00-4:00 WRITTEN, COMPILED AND EDITED BY LINDA PAAR JEFFREY ELBERT KIRK MANFREDI SPRING 2008 TABLE OF CONTENTS SYNTHESIS OF ASPIRIN 1 MELTING POINT AND CRYSTALLIZATION 2 DISTILLATION 8 EXTRACTION 11 TLC AND CHROMATOGRAPHY 14 NATURAL PRODUCTS: ISOLATION OF LIMONENE 23 FREE RADICAL CHLORINATION 24 SN1 AND SN2 REACTIONS 27 DEHYDRATION REACTIONS 30 GRIGNARD SYNTHESIS 32 COMPUTATIONAL CHEMISTRY 36 MULTIPLE STEP SYNTHESIS 38 ORGANIC CHEMISTRY 121 EXPERIMENT 1 SYNTHESIS OF ASPIRIN FROM SALICYLIC ACID Aspirin is one of the oldest and most common drugs in use today. It is both an analgesic (pain killer) and antipyretic (reduces fever). One method of preparation is to react salicylic acid (1 ) with acetic anhydride (2) and a trace amount of acid (equation 1). O OH CH3 O COOH COOH + H + CH3COOH + (CH3CO)2O 3 4 1 2 The chemical name for aspirin is acetylsalicylic acid (3) PROCEDURE Place 3.00 g of salicylic acid in a 125 ml Erlenmeyer flask. Cautiously add 6 ml of acetic anhydride and then 5 drops of concentrated H2SO4. Mix the reagents and heat the flask in a beaker of water warmed to 80-90°C, for 10 minutes. Remove the Erlenmeyer flask and allow it to cool to room temperature. Add 40 ml of H2O and let the sample crystallize in an ice-water bath.* Filter and wash the crystals with cold water. Allow them to air dry overnight and weigh the product. What is the percent yield? One drawback to this synthetic procedure is that there is the possibility of some left over salicylic acid.
    [Show full text]
  • Isolation of Amoebae and Pseudomonas and Legionella Spp
    APPLIED AND ENVIRONMENTAL MICROBIOLOGY, Jan. 1991, p. 163-167 Vol. 57, No. 1 0099-2240/91/010163-05$02.00/0 Copyright C) 1991, American Society for Microbiology Isolation of Amoebae and Pseudomonas and Legionella spp. from Eyewash Stations CHRISTINE PASZKO-KOLVA,1 HIROYUKI YAMAMOTO,'t MANOUCHEHR SHAHAMAT,1 THOMAS K. SAWYER,2 GARY MORRIS,3 AND RITA R. COLWELL'* Department of Microbiology' and Department of Environmental Safety,3 University of Maryland, College Park, Maryland 20742, and Rescon Associates Inc., Royal Oak, Maryland 216622 Received 23 August 1990/Accepted 25 October 1990 Forty eyewash units were sampled for protozoa, bacteria, and fungi. Total heterotrophic bacterial counts on nutrient agar and R2A agar (Difco Laboratories, Detroit, Mich.) ranged from 0 to 105 CFU/ml, with Pseudomonas spp. being the most frequently isolated. Total counts of 104 and 108 cells per ml were obtained with the acridine orange staining procedure. All samples were examined for Legionella spp. by direct fluorescent-antibody staining and by culturing on buffered charcoal-yeast extract agar containing a-ketoglu- tarate and glycine and supplemented with cycloheximide, vancomycin, and polymyxin B. DNA-DNA hybridization was used to confirm identification of the Legionella isolates. Legionellae were detected in 35 of 40 (87.5%) samples by direct fluorescent-antibody staining, with 3 samples yielding both Legionella spp. and amoebae. Amoebae identified as Hartmannella, Vahlkampfia, Acanthamoeba, and Cochliopodium spp. were detected in 19 of 40 (47.5%) samples. Sabouraud dextrose agar was used to obtain a crude estimate of viable fungal populations. pH, hardness, and ammonia, alkalinity, chlorine, copper, and iron contents were recorded for all water samples collected from eyewash stations; 33% of the samples had .10 mg of CO2 per liter.
    [Show full text]
  • FACT SHEET General Laboratory Safety Rules
    General Laboratory FACT SHEET Safety Rules Listed are some basic guidelines for maintaining a safe laboratory environment. 1. To ensure that help is available if needed, do 12. Make others in the laboratory aware of any not work alone if using hazardous materials or special hazards associated with your work. performing hazardous procedures. 13. Report all injuries, accidents, incidents, and 2. To ensure that help is available in case of near misses to you supervisor and complete emergencies, laboratory personnel should the Employers First Report of Injury form not deviate from the assigned work schedule through Human Resources. without prior authorization from the 14. For liability, safety, and security reasons, do not laboratory supervisor. allow unauthorized persons in the laboratory. 3. Do not perform unauthorized experiments. 15. Report any unsafe conditions to the laboratory 4. Plan appropriate protective procedures supervisor. and the positioning of all equipment 16. Properly dispose of all chemical wastes. Follow before beginning any operation. Follow the University policies for drain and trash disposal appropriate standard operating procedures at of chemicals. all times in the laboratory. 17. No pets are permitted in the laboratory. 5. Always read the SDS and the label before using Note that service animals are not pets. They a chemical in the laboratory. are highly trained and may be present in a 6. Wear appropriate PPE, including a laboratory laboratory. However, a clean, safe area should apron or coat, at all times in the laboratory. be provided where the animal can wait. Everyone, including visitors, must wear To prevent some common laboratory accidents: appropriate eye protection in areas where laboratory chemicals are used or stored.
    [Show full text]