Insulation Materials Manufacturing
Total Page:16
File Type:pdf, Size:1020Kb
INSULATION MATERIALS MANUFACTURING PUR/PIR Insulation Foam Board PUR/PIR PrePre--InsulatedInsulated Duct Panels/Fabricated Ducts PUR/PIR FOAM FOR THERMAL INSULATION (Wall External/Internal, Roof, Cladding, Ceiling, Precast Wall, Cool Storage, Partitioning) PREPRE----INSULATEDINSULATED DUCTS (ISO Duct Panels, Fabricated Ducts, Duct Accessories)Accessories) An ISO 9001 : 2000 Certified Company INSULATION MATERIALS MANUFACTURING PUR/PIR Insulation (Wall, Columns & Beams, Roof, Ceiling, Cladding), PIR Ducts and Accessories About us HAPRI Insulation Materials Manufacturing is one of the UAE Leading Thermal Insulation Company dealing in Polyurethane/Polyisocyanurate insulation, Pre-Insulated Ducts (PIR Ducts) and Accessories. We are also one of the leading exporters of thermal insulation to the Gulf region, India, Pakistan and some of the African countries. Hapri Insulation is under the license of HAPRI Werk Baustoff Gmbh (Germany). We are manufacturing rigid Polyurethane/Polyisocyanurate panels for the application of thermal insulation system. Our company was established in June 2003, to meet the requirements of the Middle East region, especially to concentrate more on the UAE market. Since the establishment on track, HAPRI is committed to provide best quality services, providing cost effective solutions according to customers’ needs, providing products matching the new and dynamic infrastructure. HAPRI products are particularly tailored to meet the necessity of local and global market. Our products are approved by Dubai Civil Defense, certified by Dubai Central Laboratory (Building Material Section, Dubai Municipality), Environment Friendly matching all the necessary requirement for Green Building and LEED Certification. Hapri Insulation Boards are Fire Rated and certified by Warrington Fire. HAPRI Pre-Insulated ducts are made of CFC Free Polyurethane (PUR)/Polyisocyanurate (PIR) with purely embossed aluminum of 80 micron on both sides or 80 micron on one side and 200 micron on the other side. ISO duct panels are used for air distribution in ventilation, heating and air -conditioning systems (HVAC) is available in different thickness and densities. With ISO panels, extremely high quality ducting can be achieved with the combination of aluminum and excellent insulation of PIR. What areareare thethethe environmental benefits ofofof Polyiso insulation? Polyiso insulation is an ideal choice for green building designs because it offers: Reduced fossil fuel consumption. Well-insulated buildings reduce the need for energy, thereby reducing air pollution and greenhouse gas (GHG) emissions. Highest Thermal Efficiency – Polyiso is the most thermally efficient insulation available in the marketplace, as determined using Long Term Thermal Resistance (LTTR) values, a 15 year time-weighted R-value. Zero Ozone Depletion Potential – Hapri Insulation Materials Manufacturing produce rigid foam board with zero ozone-depleting blowing agents. All Polyiso products are now HCFC-free and CFC-free. Zero Global Warming Potential – Hapri produced rigid foam board with zero global warming potential blowing agents. This quality is critical as the impact of climate change, or global warming, is acknowledged as a worldwide environmental concern. Recycled Content – Virtually all Polyiso insulation is manufactured using recycled material. The percentage of the recycled material by weight depends on the individual manufacturer and the thickness of the product. Many facers on Hapri Polyiso products contain up to 100% recycled materials. Tel: ++971497149714----34054663405466 ¤ Fax: ++971497149714----34054773405477 ¤ Email: [email protected] ¤ Web: www.haprimiddleast.com PO Box 3787537875,, Dubai, UAE INSULATION MATERIALS MANUFACTURING PUR/PIR Insulation (Wall, Columns & Beams, Roof, Ceiling, Cladding), PIR Ducts and Accessories OUR PRODUCTS -1-HAPRI PUR/PIR INSULATION FOAM BOARD (Both sides Fiber Glass – HAPRI FF) TECHNICAL DETAILS •Thickness: 20mm to 100mm •Density : 40 -45 kg/m 3 (depends upon the customer’s requirements) •Dimension: 2000mm x 1200mm •Water absorption by volume : 0.03% •Thermal Conductivity (k value)=0.0227w/mk •Characteristics in Fire: Class 1, Certified by Warrington Fire Approved by Dubai Civil Defense •Temperature Stability: up to 250 0 C in short term, constant from -50 0C until 110 0C •Pressure Load/Thickness Tolerance: 0.1 N/mm 2 Oder 10t/m 2, viscous plastic and can be walked on •Flexural Strength : 384kpa •CFC Free •Volume Weight: 30-35 kg/m 3 USES: •Wall Insulation for External/Internal •Columns and Beams •Exposed Floor/Ceiling •Cold store •Where there is plaster or direct paint involved •Ceiling direct paint system NOTE: For more details about the application of different system, please feel free to contact our Technical Department. Tel: ++971497149714----34054663405466 ¤ Fax: ++971497149714----34054773405477 ¤ Email: [email protected] ¤ Web: www.haprimiddleast.com PO Box 3787537875,, Dubai, UAE INSULATION MATERIALS MANUFACTURING PUR/PIR Insulation (Wall, Columns & Beams, Roof, Ceiling, Cladding), PIR Ducts and Accessories HAPRI List of Test Reports and Certificates Results/ S. No. Description Test Method Laboratory Classifications Dubai Central 1 Density BS EN 1602 : 1997 52.6kg/m³ Laboratory Dubai Central 2 K – Value ASTM C518 : 2010 0.0214 Laboratory ASTM C203 : 05a Dubai Central 3 Flexural Strength 384kpa Method 1 Procedure 1 Laboratory Dubai Central 4 ComprehensiveStrength BS EN 826 : 1996 168.7kpa Laboratory Dubai Central Comply the 5 Dimensional Stability BS EN 1604 : 1997 Laboratory standard Dubai Central As per standard 6 Length and Width BS EN 822 : 95 Laboratory specification Class E (this grade DCL gives Dubai Central 7 Reaction to Fire BS EN 1503-1 2007 to all the Laboratory successful applicants) BS EN ISO 11925-2 Dubai Central 8 Flame Spread Less than 20mm 2002 Laboratory As per the Dubai Central 9 Squareness BS EN 824 : 1995 standard Laboratory specification 10 Fire Classification EN 13501-1 : 2002 Warringtonfire Class E Dubai Central 11 Water Vapor Transmission ASTM E 96-00 NIL Laboratory Tel: ++971497149714----34054663405466 ¤ Fax: ++971497149714----34054773405477 ¤ Email: [email protected] ¤ Web: www.haprimiddleast.com PO Box 3787537875,, Dubai, UAE INSULATION MATERIALS MANUFACTURING PUR/PIR Insulation (Wall, Columns & Beams, Roof, Ceiling, Cladding), PIR Ducts and Accessories -2-HAPRI PUR/PIR INSULATION FOAM BOARD (Both sides Aluminum Foil – HAPRI AA) TECHNICAL DETAILS •Thickness : 20 mm to 100 mm •Density: 40-45 kg/m 3 (depends upon customer’s requirements) •Dimension: 2000mm x 1200mm •Water absorption by volume : 0.03% •Thermal Conductivity (k value)=0.0227w/mk •Characteristics in Fire: Class 1, Certified by Warrington Fire Approved by Dubai Civil Defense •Temperature Stability: up to 250 0 C in short term, constant from -50 0C until 110 0C •Pressure Load/Thickness Tolerance: 0.1 N/mm 2 Oder 10t/m 2, viscous plastic and can be walked on •Flexural Strength : 384kpa •CFC Free •Volume Weight: 30-35 kg/m 3 USES: •Roof Insulation •Cladding (stone, marble, etc.) •Partitions/Cavity Wall •Ceiling •Sandwich Panels NOTE: For more details about the application of different system, please feel free to contact our Technical Department. Tel: ++971497149714----34054663405466 ¤ Fax: ++971497149714----34054773405477 ¤ Email: [email protected] ¤ Web: www.haprimiddleast.com PO Box 3787537875,, Dubai, UAE INSULATION MATERIALS MANUFACTURING PUR/PIR Insulation (Wall, Columns & Beams, Roof, Ceiling, Cladding), PIR Ducts and Accessories TECHNICAL DETAILS for FIBER TISSUE Scraping Coating Tissue (Fiber Glass Tissue) Specification ITEM UNIT VALUE Type E Size 1.222x/R Weight g/m 2 180±5% Thickness mm 0.38 Oxygen Index Number % ≥28 Tensile Strength MD N/ 120 Tensile Strength CMD N/ 100 Fire Rate B2 Fiber Mesh is a woven of pure glass textile Propylene Plastic Plug will be placed in foam fiber highly resistance to Alkali suitable for board after installation. Installation in every environment. Technical Details Technical Details Size: 70mm, 90mm, 120mm Weight: 180g/m2 Color: White Mesh Size: 1m x 50m Wrap: 2800N/5cm Weft: 2000N/5cm Elongation Wrap 3.8 % Weft 3.8 % Tel: ++971497149714----34054663405466 ¤ Fax: ++971497149714----34054773405477 ¤ Email: [email protected] ¤ Web: www.haprimiddleast.com PO Box 3787537875,, Dubai, UAE INSULATION MATERIALS MANUFACTURING PUR/PIR Insulation (Wall, Columns & Beams, Roof, Ceiling, Cladding), PIR Ducts and Accessories -3-HAPRI PUR/PIR PREPRE----INSULATEDINSULATED DUCT PANELS/FABRICATED DUCTS Pre-insulated Duct Panel is manufactured of CFC free closed cell Polyisocyanurate foam “sandwiched” between aluminum sheets, one on each side. The panel sheet later cut, shaped, fabricated and glued into different profiles to form the final duct. The duct, is later connected to other ducts via aluminum profile / PVC flanges to complete the system. TECHNICAL DETAILS OF HAPRI PIR DUCT PANELS Thickness: 20mm, 30mm Aluminum Facing: Embossed, Plain Aluminum Thickness: 80/80, 80/200 Density: 48-50kg/m3 (can be adjusted according to customer’s requirement) Compressive Strength: 200N / mm2 Thermal Conductivity: 0.022 W /m.K Flame Retardancy: B1 Friction Coefficient: 0.0135 Recycling Rate: 60-80% There is no Freon in ISO Ducts. So it won't destroy aerosphere. As a result of low water absorbability of ISO Duct panel, it won't bring germ in the ducts. The panel size is 1200mm (Width) and 4000mm (Length). Length can be decided upon the customer’s requirements. Tel: ++971497149714----34054663405466 ¤ Fax: