Metal Leaf Decorative Board Release your creativity & make a unique metal leaf masterpiece!

What You’ll Need • X-Press It Metal Leaf Flakes • X-Press It Gold Size • X-Press It General Purpose Clear Tape • Paint Brushes • Decorative Board Also available in

Step 1: Step 2: Step 3: Ensure surface is clean. Apply X-Press It Paint the corner area on the wooden tray Gently cover over X-Press It Gold Size General Purpose Clear Tape diagonally with X-Press It Gold Size being careful not with the X-Press It Metal Leaf Flakes. across one end of the wooden tray. to go over the tape. Allow 5-10 minutes to cure.

Step 4: Step 5: Press gently with your finger or a soft To prevent tarnishing apply an all purpose rush. Ensure flakes are applied to all sealer. Your project is complete and ready areas of the gold size. Gold size remains for display! tacky so you must ensure all areas are covered with metal flakes.

For more inspiration visit: www.x-pressit.com.au X-Press It Metal leaf is fun & easy to apply to variety of surfaces. Ideal for craft and DIY projects, there are two different colours available in the range: www.facebook.com/xpressitproducts Gold Metal Leaf Flakes – Made from a combination of zinc, & www.instagram.com/xpressitau Silver Metal Leaf Flakes – Made from 100% aluminium Metal Leaf Flakes Pen Holder Release your creativity & make a unique metal leaf masterpiece!

What You’ll Need • X-Press It Gold Metal Leaf Flakes • X-Press It Adhesive Sheet • Paint Brushes • All Purpose Sealer or Varnish • Pen Holder (rectangle or square) Also available in Silver

Step 1: Step 2: Step 3: Apply X-Press It Adhesive Sheet to Cut the X-Press It Adhesive Sheet Peel back X-Press It Adhesive Sheet, pen holder (ensure surface is clean). and trim the edges around the gently cover sheet with the X-Press It surface. Metal Flakes.

Step 4: Step 5: Step 6: For even coverage press gently To Prevent tarnishing apply a water Your Metal Leaf Flake pen holder with your finger or a soft brush over based varnish or all purpose sealer project is complete! the X-Press It Metal Flakes. Ensure over the Metal Flakes. flakes are applied to all areas of the adhesive sheet. For more inspiration visit: www.x-pressit.com.au X-Press It Metal leaf is fun & easy to apply to variety of surfaces. Ideal for craft and DIY projects, there are two different colours available in the range: www.facebook.com/xpressitproducts Gold Metal Leaf Flakes – Made from a combination of zinc, brass & copper www.instagram.com/xpressitau Silver Metal Leaf Flakes – Made from 100% aluminium Metal Leaf Flakes Flower Pot Release your creativity & make a unique metal leaf masterpiece!

What You’ll Need • X-Press It Silver Metal Leaf Flakes • X-Press It Gold Size • Paint Brushes • All Purpose Sealer or Varnish • Flower Pot • Heart Accessory Also available in Gold

Step 1: Step 2: Ensure surface is clean. Paint the area on the flower Gently cover over X-Press It Gold Size with the X-Press pot & heart accessory with X-Press It Gold Size. It Metal Leaf Flakes. Allow 5-10 minutes to cure.

Step 3: Step 4: Press gently with your finger or a soft brush. Ensure To prevent tarnishing apply an all purpose sealer over flakes are applied to all areas of the gold size. Gold size the metal flakes. Your Metal Leaf Flake Flower Pot remains tacky so you must ensure all areas are covered project is complete! with metal flakes. For more inspiration visit: www.x-pressit.com.au X-Press It Metal leaf is fun & easy to apply to variety of surfaces. Ideal for craft and DIY projects, there are two different colours available in the range: www.facebook.com/xpressitproducts Gold Metal Leaf Flakes – Made from a combination of zinc, brass & copper www.instagram.com/xpressitau Silver Metal Leaf Flakes – Made from 100% aluminium