sign in sign up
<<
Home , Motor oil

DIRT BIKE OWNERS MANUAL SSR150

SSR USER MANUAL

DIRT BIKE OWNERS MANUAL SSR150

INTRODUCTION

Thank you and congratulations for having chosen. We hope you enjoy driving a SSR Motorsports bike now that is one of the proud owners of a SSR Motorsports. We are sure you will give great satisfaction. This manual describes the features of the dirt bike, and provides instructions for you to have a better understanding of the controls and operation. You are advised to READ THIS MANUAL CAREFULLY BEFORE FIRST DRIVING THE VECHICLE. The proper operation and compliance with standards of care and maintenance, ensures greater safety and driving in a notable minimization of malfunctions and accidents, which will help extend the life of your dirt bike and allow your unit is always on condition ready to be driven. Remember that we are always ready to provide advice regarding the management or maintenance.

DIRT BIKE OWNERS MANUAL SSR150

INDEX OF ICONS WARNING The information, images, and specifications in the manual are Indicates those necessary actions must be based on the most recent data product information available at followed to avoid injury to the driver or people the time of publication. Since changes may have occurred or who are inspecting dirt bike improvements, there may be differences between vehicles and CAUTION this manual. SSR Motorsports reserves the right to make Warns of the operation to be performed to avoid changes any time, without having to notify. any damage to your body or your dirt bike Publication year 2015 Value Group Enterprises dba SSR Motorsports 12825 Alondra Blvd., Norwalk, CA 90650 USEFUL INFORMATION www.ssrmotorsports.com It provides useful information regarding the

actions that must be addressed clearly

It is important to know that the VIN (vehicle identification number) of chassis and engine, they are used to identify the vehicle and for future consultations such as the purchase of spare parts and warranty. Please carefully check the Always a helmet details of vehicle you have purchased. For your safety and that of your passengers always wear a helmet when operating the dirt bike。

DIRT BIKE OWNERS MANUAL SSR150

TABLE OF CONTENTS

INTRODUCTION 1 Description of vehicle 9 INDEX icons 2 1. components 9

TABLE OF CONTENTS 3-4 2. VIN Record 10

Technical specifications 5 3. refueling 11 6 Driving safety User Guide 12 6 1. Safety Tips 1. PSI line 12 6 - Before driving 2. Turning motor 12 6 - When handling 3. Seated motor 12 6-7 2. Protection elements 4. driving 13 7 3. Modifications or replacement of parts 7 5. Braking: warning 13

4. Added load and accessories 7-8 6. Switching off the engine 13

DIRT BIKE OWNERS MANUAL SSR150 Checking, adjustment and maintenance

1. Motor 14 14. suspensions 19 - Check engine oil - Front suspension 20 - Change engine oil - Rear Suspension 21 - Cleaning oil pan 14 16. Periodic Maintenance Chart 2. Tires 15 3. Revision or replacement of spark plugs 15-16 WARRANTY 4. Check and clean filter 16 1. Terms of warranty 22 5. Checking and Cleaning the 16 2. Requirements to the claim Warranty 22 6. Adjusting the cable 16 3. Warranty Exclusions 23 7. Adjustment 17 4. Terms of nullity Warranty 23 8. Check and adjust valve clearances 17 5. Limitations of Warranty 24 9. Brake checking 6. Service Coupons - Brake Adjustment 17 - Proof of delivery 25 10. Cleaning the dirt bike 18 - Statement warranty 25 11. Procedure for the storage 18 12. Commissioning after storage 19

DIRT BIKE OWNERS MANUAL SSR150

TECHNICAL SPECIFICATIONS

MOTOR Single-, vertical, air cooled,4- • Type: • Displacement: 150cc • and stroke: 62x49.6mm • Torque: 11.5N·m/7,000±500 rpm • Power: 10.0kw /8500±500 rpm • Ignition: CDI. • Start: Kick & Electric start Chassis and Suspension • Tires: - Front: 70/100-17" - Rear: 90/100-14" • Brakes: - Front: - Rear: Hydraulic ventilated disc 2 . • Suspension: - Front: Hydraulic ventilated disc 1 piston -Rear: Non-adjustable inverted fork DIMENSIONS adjustable • Dimensions: (I / h / w): 1860mm*790mm*1120mm • Wheelbase: 1340 mm • Weight: 96 kg • Transmission: 5 Speed Manual, 1-N-2-3-4-5 • : Manual oil bath multi

DIRT BIKE OWNERS MANUAL SSR150 Driving safety -IN HANDLING • Familiarize well with brake systems. use both front and rear brakes, not to lose control vehicle. CIRCULATION IS STRICTLY PROHIBITED • Take great care and drive at lower speeds in bad weather In public with this vehicle. (rain, wind, low visibility). • Do not exceed speed limits that jeopardizes conductive capacity and consider the conditions existing climate and Meet the requirements listed below: terrain to avoid accidents or injuries. 1. SAFETY TIPS • Always both hands on the handlebars and both feet on the -Before driving: footrest. • Make sure you are trained for driving dirt bike and know all its control functions DO NOT ALLOW THE TRANSFER OF PASSENGERS. • Know the capabilities and limitations of the vehicle. 2. Protection elements • Always carry documentation proving the ownership the vehicle. • Do not overload the vehicle: avoid exceeding the limit kilograms established in this manual. • This allows loads vehicle than the driver. • Always perform safety checks. Inspect the dirt bike before starting the engine, so you can avoid accidents or damaging vehicle. Check the function of brakes before driving. Always wear a helmet.

DIRT BIKE OWNERS MANUAL SSR150

• It is recommended to use gloves and face shield drive, if you wish. 4. ADDED LOAD AND ACCESSORIES

• Wear clothing that covers the legs fully as the • Remember that the performance of the dirt bike during use and remains for a while after stopping the engine.。 may be reduced due to: access facility not manufactured by the company loads Avoid wearing loose-fitting clothing, which can be trapped in the drive inappropriate, worn tires, overall condition dirt controllers, or wheels and cause an accident. bike, bad or bad weather. These general guidelines will help you decide how equates your

dirt bike and as safely management. 3. MODIFICATION OR REPLACEMENTTS COMP PARONENTS The dirt bike modification or elimination of the arbitrarily original pieces can make the illegal or unsafe vehicle. The user must respect - LOAD all applicable national and local regulations regarding the vehicle as DO NOT LOAD THIS UNIT IS INTENDED ONLY MOVE THE DRIVER. IS STRICTLY PROHIBITED CIRCULATION IN THE STREET.

-ACCESSORIES Our company has specifically selected genuine accessories for dirt bike. You are responsible the choice, installation and use of accessories not our company. SSR Motorsports is not responsible for replacing • Always follow detailed guidelines recommend in loading unauthorized parts. • Carefully inspect the accessory to make sure it does not attenuate any weight, reduces the ground clearance, the steering angle rotation or limit suspension travel, the displacement of the direction or operation controls.

DIRT BIKE OWNERS MANUAL SSR150

• Cooling the engine. The large fairings or windshield installed on the fork, poorly designed or inadequately placed, can produce forces aerodynamic driving causing instability. • Do not add electrical equipment that exceeds the capacity vehicle electrical system. • Do not carry a "sidecar" or a trailer, this dirt bike is designed for it, and driving will be seriously affected when placed. • Accessories may increase the time needed for hands or feet to operate the controls resulting in an increase in the time of reaction in an emergency.

Make sure that the accessories do not interfere with the freedom of movement of the driver and their ability control. Improper installation of accessories may create instability and undermine the functioning of the dirt bike.

DIRT BIKE OWNERS MANUAL SSR150

Description of vehicle 6. rear shock 13. throttle 20. front wheel 1. COMPONENTS 7. rear brake 14. front brake 21. front disc 1. seat 8. swing arm 15. handle bar 22. front brake reservoir 2. plastics 9. rear disc 16. triple clamp 23. foot rest 3. 10. linkage 17. front fork 4. exhaust pipe 11. rear wheel 18. carburetor 5.chassis 12. 19. engine

DIRT BIKE OWNERS MANUAL SSR150 2. VIN RECORD The engine number is stamped on the left the underside of the dirt bike.

The VIN, are required to manage the warranty.

• Write down the numbers for your reference when you need them. The VIN is stamped on the front of the chassis behind the number plate on the steering stem tube.

VIN: ______ENGINE NUMBER：______

DIRT BIKE OWNERS MANUAL SSR150

3. FUELING

•The dirt bike uses premium The tank has a capacity of 7 liters of fuel. without content lead (91 octane minimum).

Filling the tank:

1. Place the dirt bike perpendicular to the ground.

2. Turn the fuel cap counterclockwise.

3. Remove the fuel cap.

4. Once the desired fuel spill, replace the cap and turn clockwise to tighten adjustment firmly.

5. Make sure the hose coming from the fuel cap not be strangled.

If fuel from carb overflow – remove carb & adjust float height. Check for any

debris which may be blocking the fuel shut-off valve

DIRT BIKE OWNERS MANUAL SSR150 • Do not start the engine indoors or shortly ventilated, it USER GUIDE may cause accidents due the toxic exhaust fumes. 1. Pre-ride inspection It is necessary for your safety, check: • If the engine is ignited by kick start, the dirt bike must • Engine oil level be stopped with the front brake. • fuel, according to the route to go • If you cannot start the engine in 5 seconds start the • Tire pressures as indicated calibrate engine via the kick again. • Operation of the throttle • Avoid sudden acceleration when the engine is cold, • Operation of lights and indicators as can cause serious damage.。 • Alignment of management • Do not keep the dirt bike unnecessarily idle to avoid • Proper operation of the brakes overloading the motor. 2. Starting the Engine 3. Seated engine Follow these steps: We recommend that during the first 2 hours 1. Place the unit in contact 2. Make sure gear is in neutral 3. Check the fuel level 4. Be sure to tighten the clutch to reduce motor and for safety. • Do not speed excessively, suggest 5. Kick start lever start accelerating throttle to 1/4 "of the position circulate at a maximum speed of 50 km / of the fist. h. • Be careful not to exceed 5000rpm for correct transposition of metals

• Do not load the vehicle in excess • Use front and rear brakes independently reduces • Perform the first maintenance within 4 hour braking efficiency, otherwise wheel can lock up or 30 liters of fuel consumed, and then follow losing control. . the instructions on the maintenance table.

DIRT BIKE OWNERS MANUAL SSR150 • Slow down or halt throttle before coming to a corner, to prevent wheel slip, and reducing control of the dirt bike. 4. Driving • No braking, accelerating or turning abruptly, if you drive in Tips to follow: the rain, by wet ground or loose surfaces, reducing • Warm up the engine before driving. maneuverability to stop or control the vehicle. • Gradually increase the engine speed by half of the 6. Engine Shutdown throttle, to avoid unnecessary skids. Method to stop： • Coordinate the throttle and brakes to a slowdown 1. With the vehicle stopped, decelerate completely (if that optimal. were accelerating) to reduce the revolutions of the engine • Must use a dual brakes (front and rear) and they until idling. should not be applied too tightly, so such as not to 2. Take the switch to the off position reduce the braking efficiency. 5. Braking For normal braking: gradually apply both brakes (front and rear) while low speed. • Park on a firm, flat ground, not fall down dirt bike, For maximum deceleration: decelerate completely and apply both brakes the wheels firmly oil will from carb if then. preventing locking.

Checking, adjustment and maintenance

DIRT BIKE OWNERS MANUAL SSR150 1. Motor oil - Change engine oil: - Check engine oil: Engine oil plays an important role in the work of motor. • It is advisable to do so before riding the dirt bike. • Keep the dirt bike on firm and flat ground, on the support main stand - Change engine oil: • Remove the dipstick and then cleaning, reinsert again without Engine oil plays an important role in the work of screwing it to check the level. motor. • The engine oil level should be between the high and low. • Check the engine oil regularly and change oil as

indicated in the periodic table maintenance. Steps to follow: 1. Make sure the engine is stopped. Remove the cap drainage underneath (at the base) of the engine when engine is hot. In this way, oil drain. Operate repeatedly kickstarter to drain completely. 2. Clean the and assemble after cleaning. 3. Add clean oil 1100cm3. Start the engine and run at idle speed for 2 to 3 minutes 4. After the engine stops for 1 or 2 minutes, check the oil level to see if the engine oil is between high and low marks. • Do not use engine oil with different degree, to prevent that the motor fails.

• Use 10w40 semi synthetic engine oil.

• Never use oil recovered.

Select motor oil 10w40 semi synthetic engine oil.

• If this oil is not available, read the specifications techniques and find a substitute available to the local ambient temperature.

- Clean the oil pan 3. Revision or replacement of spark plugs

DIRT BIKE OWNERS MANUAL SSR150 Using the recommended oil, cleaning is not required or 1. Remove the cover from the front cover. 2. Disconnect the spark internal engine components as the multigrade which have plug cap and remove it with a wrench . 3. Clean dirt from maintained detergent agents clean and free of sediment all lubricated the spark plug (remove deposits) with a plug cleaner or, if components. necessary, use a wire brush. If the plug is corroded or there is too 2. tires coal deposit in it, it must be replaced. 4. Check the clearance The proper air pressure gives better stability and driving comfort and between the spark plug electrodes, using a feeler gauge wire type. improves the life course of the tire. 5. The spark plug gap or light should be 0.6-0.7 mm. If necessary • Frequently check the tire pressure and correct if necessary. adjust the spark gap: • Check the pressure when tires are cold. Check they have no cuts or any sharp object embedded. • For safety, replace worn tires excessively. 1. Gently bend the side electrode 2. Ensure that the spark plug washer is in good condition. 3. While the washer installed, place the spark plug by hand, to avoid damaging the threads. • Ensure the correct pressure in tires 20-30 PSI for off-. Unless you have a rim lock fitted to your rear wheel, do not allow the tire pressure to drop below 20 PSI. this is of In order to check your bike fuel air mixture & thus particular importance on bikes with 140cc engine they have the power to spin the wheel inside the tire & rip the valve off your inner tube. If you running performance, take out the spark plug and check want to run low tire pressure for traction, get a rim lock fitted. Lock it, the electrode; the color should be golden brown. If it is load it and then let your air out. Unless you want to pinch your front tire white, the engine is running too lean (not enough fuel). If it is black on a rock and get a puncture, the same pressure applies, min 20 PSI. (sooty color) it is too rich (too much fuel). If it is white & black, the check your tire pressure before riding to ensure your trip isn’t cut short. engine is VERY lean & causing misfire, which you should be able to detect whilst riding. As your jets are close to what they should be for the UK, minor alternations can be made by adjusting the needle height on your carb, without the need for different size jets.

DIRT BIKE OWNERS MANUAL SSR150 4. Tighten the spark plug, if it is new: 1/2 turn with a wrench spark plug - Disassemble process: to compress the washer. If the spark plug is already used, tighten only between 1/8 and 1/4 turn after having settled. 1. Remove the air filter cover 5. Replace the spark plug cap. 2. Remove the screw and disassemble the air filter • Whenever the spark plug must be properly tightened to prevent very - Cleaning: hot and possibly damage the engine. 1. Being a paper filter element can be cleaned with pressurized air, by blowing from inside to outside. 2. It is recommended to replace according to maintenance table indicates since it may make factors such as fuel • Never use an improper range plug, because it could consumption, pollution and engine life. cause engine damage. NOTES • The air filter element must be intact, otherwise, the engine • We recommend using spark plug CPR6EA-9. absorb dust and pollutants and period of engine life will be

shortened. 4.Check gasoline filter and replacement • Avoid getting water in the air filter during washing dirt bike 1. Remove the filter hose and drain the gasoline remaining in the • Never clean the air filter element with water, gasoline or any circuit . 2. Remove the filter 6. Throttle cable adjustment 3. Install the new filter and reconnect the hose 1. Measure the throttle cable free play, the stipulated value 5. Checking and Cleaning the air filter should be 2-6mm.。 The air filter should be removed and disassembled to see if • If the throttle cable free play is not within the parameters contaminated. stipulated by adjusting the distance adjuster (regulator) located after the curve

DIRT BIKE OWNERS MANUAL SSR150 performs the accelerator cable under right mitten Therefore, we recommend that for any • If you need to reduce free play, unscrew the regulator and In case you inconvenience or periodic review, is directed to want to increase screw. Review the throttle free play cable after operating an authorized, for staff knowledge and proper the motor to make sure it works properly or not be accelerated. tools, perform the tasks they see fit. • If the free play is not appropriate, adjust to the correct position. Light Valve: Input: 0.03 mm Exhaust: 0.05 mm

7. Carburetor adjustment The carburetor adjustment and settings must be 9. Brake Review assembled by authorized and trained technician, informal • Operate the front brake and rear verify proper tuning can cause engine damage. operation.

8. Review and adjust valve clearance • Check the pads are not worn to the limit as may be dangerous to drive in this condition. This unit has disc brakes, making them bleedable. The valve may be damaged and the engine power

decreased. Check valve clearances regularly. Check the level periodically

However, regulate the desired route of braking hose, otherwise the brake fluid leaking may be corroded. • The excessive play in the valves can cause noise, but the no play Front & rear brakes prevents the valve closure. • Check and adjust valve clearance when the engine is cold. The sequence to follow when carrying out the review and, if necessary, adjustment of the light valve is a procedure complex.

DIRT BIKE OWNERS MANUAL SSR150

10. Cleaning the dirt bike • Check the main parts of the dirt bike before storage. Clean the dirt bike regularly to prevent which • To maintain the dirt bike in normal course storage: discolor the surface. 1. Replace engine oil 2. Drain the remaining gasoline from the fuel tank  The water pressure can damage many parts and carburetor. of the dirt bike, therefore not flush the following Then spray with anti- oil the inner fuel tank and close the tank lid. pressure parts: wheel hub, stop switch, fuel tank 3. If storage exceeding one month, the carburetor gasoline must be and the portion of seat, carburetor, ignition drained.

• As the gasoline is flammable, the engine must be switched off during switch, etc. 1. After the dirt bike has been cleaned, rinsed filling and emptying of the fuel. with fresh water. We recommend shampoo used • Do not be lit cigarettes, sparks fire where fuel is empty or where fuel is as any other detergent is detrimental to the paint stored or where the dirt bike is filled with gas. contain degreasing agents ammonia or caustic. 4. Remove the spark plug 2. Dry the dirt bike. 5. Fill a bucket (15-20ml) of oil into clean cylinder and insert a piece of

3. Run the engine idling for a few minutes. cloth into the hole plug. Screw the spark plug is set and turn the engine 4. Check the brakes several times before riding over several times by operating the starter, without turning it on. dirt bike, and make repairs or adjustments if Adjust the spark plug. necessary. 6. Remove the battery from the dirt bike. Place the battery in a safe place where it will not freeze or expose to UV sun. Charge the battery once a month with the regime (amperage) specified. (No more than 6 Ah) 11. Procedure during storage 7. Clean and dry the dirt bike. Spray painted surfaces with color fixative • Be careful to prevent your bike from moisture, sun and rain and chrome surfaces with oil anti-rust. and avoid unnecessary damage. 8. Adjust the air pressure of the tires. 9. After the dirt bike is parked, lift wheels with a stand, so that the wheels not touch the floor. 10. Cover the dirt bike with dirt bike cover.

DIRT BIKE OWNERS MANUAL SSR150 12. Startup after storage 1. Remove the cover and thoroughly clean the dirt bike. 2. If the dirt bike has been stored for more than four months, engine oil must be replaced. - Front suspension 3. Drain oil antioxidant fuel tank before refueling. Non-adjustable inverted fork 4. Test the performance of the dirt bike at low speed, in a safe area before you resume driving normally to verify the correct operation of the vehicle.

13. suspensions This unit is equipped with front and rear suspension. Only the rear shock is adjustable.

- Rear Suspension Has rebound adjustment.

procedure:

- Turn the screw shown as a regulator with a screwdriver sense plane schedule to reduce bounce and counterclockwise for effect otherwise.

DIRT BIKE OWNERS MANUAL SSR150 14. Periodic service - 2 Hours Service After 2 hours carry out the following checks & procedures: -Drain oil & replace with semi synthetic 10W40 4-stroke engine oil -Check all nuts & bolts & tighten where necessary ( use PDI data as reference ) -Check nut is tight -Check wheel spokes ( especially rear wheel drive side ) and tighten where necessary -Re-adjust throttle cable & clutch cable if required -Re-tension chain -Check wheel bearings for any sign of wear of free-play -Check tire pressures Engine Exhaust Glows Red ( fast tick over ) – -Carburetion too lean, richen mixture via raising needle ( lower circlip to raise needle ) -Engine misfires at mid to high engine speed, open throttle – Mixture too rich, drop needle or change Jet -Engine pops & bangs on over – run ( deceleration ) -Mixture too lean, adjust air screw clockwise then re-test -Engine kick back hard whilst starting- -Ignition too advanced ( where adjustable, retard ignition ), or mixture too lean -Engine difficult to start – engine flooding or mixture too rich – check float height -Engine difficult to start – too lean, pilot jet blocked or float height incorrect ( not enough fuel in float chamber ) can be detected if engine starts with throttle significantly open -Weak spark – Pick-up coils too far from flywheel on bad earth Erratic spark – faulty CDI -No spark – Either poor earth or faulty Rotor Coils/CDI/Coil/Lead/Cap/Plug – use moving coil multi-meter to diagnose. 3 volts from pick up coil (positive to chassis), 6 volts from generator coil (positive to chassis). Check also conductivity of HT lead, end to end & also plug cap end to end (possible failed resister in cap). Check for faulty kill switch by disconnecting it. -Engine fire once or kick back, but will not run

DIRT BIKE OWNERS MANUAL SSR150 - timing out -Engine will not rev out lacks power – cam timing out or very worn valve springs ( possible faulty plug ) -Engine has little mid-range performance but revs out fine – cam time out -Engine will not tick over – turn idle screw clockwise, if still not possible to correct, check for air leaks -Fuel leaks from over flow – Float set incorrectly, needle blocked by debris ( common on new bike ) or sticking floats -Engine runs fine, but then starts to misfire – faulty rotor coils/CDI/Coil/Plug ( something is breaking down under load/tem ) -Rattles from engine ( top end ) – set incorrectly or loose cam chain ( top end noise ) -Rattle from engine – chattering ( bottom end ) – loose or worn clutch / chlutch gears / missing teeth or loose flywheel -Knocking from engine ( top end ) – worn/cracked piston or piston pin – replace -Knocking from engine ( bottom end ) – worn main or big end bearings – replace -Engine will not tick over when warm – tappets set incorrectly -Engine will not return to idle & races – sticking throttle slide/cable or air leak between carb & -Erratic engine idle – air leak between carb & cylinder head, blocked air jets in carb, faulty carb -Engine runs fine from startup then cuts out – blocked fuel tank breather causing vacuum –check -Clutch slips – worn clutch plates, worn clutch springs, incorrect cable adjustment, or stiff clutch actuator through side cases or wrong oil -weight / have you put fully in your engine? Drain & correct -Missing a gear / jumps out of gear / slipping gear ( jolting ) – worn or bent selector forks bent or damaged selector shaft, replace faulty gear box parts -Kick start slips – worn or damaged kick start gears, shattered or badly worn output shaft bearing or cracked engine cases, remove clutch case & inspect -Engine seized – failed oil spinner or clutch ( remove clutch case ) seized piston ( remove head & check ) – snapped ( remove head & check ) -Engine produces black smoke – too much fuel, check float lever & main jet is secure ( use smaller jet if you have changed from standard ) -Engine produce white/blue smoke - worn piston rings or piston. On very old engines replace valve stem seals -Engine loses oil through breather pipe – check cylinder head bolts are tight & are not stud bound i.e. spring back when tightened, check head and or cylinder head oil seals for damage

DIRT BIKE OWNERS MANUAL SSR150 -Engine loses oil through output shaft / clutch seals – blocked/kinked engine breather or old worn seals, also possible excessive blow by from worn piston/rings but this should be evident from white exhaust smoke long before losing oil through breather. Suspension -Shock feels springing, no rebound damping – check shock pressure 100 – 150 bar ( using shock pump ) If loses pressure quickly seals gone replace shock -Clunking from rear over bumps – check shock bushes for wear, check shock bolts are tight, check swing arm bolts are tight, check swing arm bearings for wear, check rear wheel bearings -Oil leaking from shock – seal gone, replace shock -Back end very soft – check shock preload locking nut is tight. Re-adjust as necessary, if does not remedy spring is worn, replace shock -Forks leak oil – replace seals & re-fill with oil ( 175 ml per leg 7.5 – 10 weight ) -Forks have no or little rebound – replace seals & re-fill with oil ( 175 ml per leg 7.5-10 weight ) -Forks are soft – replace springs -Fork stanchions are pitted/rusty – replace form Brakes -Feel spongy – check pads for inconsistent wear, bleed system with fresh DOT4 fluid -Feel firm but do not work – Pads incorrectly fitted & thus unevenly worn or wrong size disk – inspect pads for inconstant wear -No feel – lever goes full travel without actuating brake – rear brake – adjust master cylinder actuating rod, check for leaks, bleed, replace brake assembly -Metallic noise during braking – replace pads -Front/rear brake dray – inspect and clean caliper, use copper grease on caliper floating pins, warn pads ( replace ), warped brake disk ( replace ) -Grabs ( shudders ) under braking – loose caliper bolts or pins, worn caliper housing Other -Chattering from rear – chain tension / worn sprocket/chain -Play in rear end – loose swing arm or shock, worn swing arm bearings or shock bearings check & replace -Knocking front end – loose or worn headstock bearing -Steering notchy – headstock bearings too tight or worn

DIRT BIKE OWNERS MANUAL SSR150 -Guidelines for correct jetting (fuel mixture adjustment) In order to check your bike fuel air mixture & thus running performance, take out the spark plug and check the electrode; the color should be golden brown. If it is white, the engine is running too lean (not enough fuel). If it is black (sooty color) it is too rich (too much fuel). If it is white & black, the engine is VERY lean & causing misfire, which you should be able to detect whilst riding. As your jets are close to what they should be for local area, minor alternations can be made by adjusting the needle correct on your carb, maybe change for different size jets. To add more fuel, raise the needle one notch. This is achieved by removing the carb from the engine, removing the throttle slide, removing the needle & adjusting the position of the circlip. Conversely, if you need to reduce the amount of fuel, drop the needle one notch. Re-assemble the carb & continue testing, remembering to check the color of your spark plug. Once you have achieved the correct full load fueling, you can get the idle mixture screw. The 140 – 160 engines like to run very rich at idle, this way you get a clean progression from idle jet to main jet. To achieve a richer mixture, turn the air screw (next to filter) clockwise. Ideal speed may need to be adjust at same time to keep engine running.

DIRT BIKE OWNERS MANUAL SSR150

WARRANTY

1. GENERAL CONDITIONS 2. REQUIREMENTS FOR THE CLAIM WARRANTY SSR Motorsports offers warranty from invoice date of your vehicle. In The safety is the responsibility of both the manufacturer and the this particular case, as it is an off road bike, SSR Motorsports limited user, so you must promptly: warranty solely to defects : • Give a responsible and careful use the vehicle, according with • guarantee that the components are parts listed in the table. all recommendations of the manual and laws traffic regulations. • You must perform all services according to the maintenance table. • Give immediate notice of the defect or malfunction giving rise • The warranty covers parts only, excluding labor work and material to the claim with an authorized dealer. transport as appropriate. • Approaching the vehicle to the dealer note that not meet any of • The parties included in the warranty, will be repaired or replaced in the conditions void warranties after a brief verification as

SSR motorsports authorized dealer. detention is appropriate or not recommend the vehicle.

• Provide proof of purchase along with the manual verification the term of the warranty.

DIRT BIKE OWNERS MANUAL SSR150 • Any damage caused by wear or discoloration naturally paint, 3. WARRANTY EXCLUSIONS Are totally excluded from the warranty: upholstery, chrome, etc. • Regulations or adjustment having to do with maintaining normal vehicle. • Elements of friction as brake pads and discs, clutch, centrifugal clutch 4. CONDITIONS OF REVOCATION OF WARRANTY pads. • Chain, sprockets, tensioner distribution. The warranty will expire automatically when compliance any of • All types of fluids such as brake fluid, motor oil or transmission, coolant. the following factors: • Fuel filters, oil or air. • Seats / upholstery. • Failure to comply with any of the items mentioned in the • Tires and Tubes. maintenance table. • Hubs of any kind. •Spoke • Modify the original condition of the vehicle. •Rim wheels. • The use of non-original parts or SSR MOTORSPORTS. • Masses. • Cables command: brake / clutch / throttle. • Adding accessories. • Spark plugs. • service or repairs in non-approved by SSR MOTORSPORTS • Transmission Systems: chain, ring and pinion - and drive transmission. Motors. • Voltage Regulators. • Damage caused by misuse or intentionally, by acts of God, • Fuses. • starter brushes. accidents, competitions or any damage not attributable to • CDI / ignition. manufacturing or assembly defect. • Mirrors. • Disregarded minor faults that do not affect default in the normal • Vehicle rental to third parties. performance of the vehicle. • The use of other than that specified in the manual vehicle user.

DIRT BIKE OWNERS MANUAL SSR150 5. WARRANTY LIMITATIONS • All legal management before any authority and expense this The warranty is limited to replacement or repair parts found as defective incurred are not covered by this warranty. by the manufacturer, assuming no obligation to compensate for possible • In no event listed above, the purchaser may claim costs or consequences resulting from the removal or immobilization the cancellation or breach of purchase contract or compensation vehicle. for damage.

SSR Motorsports limits the scope of the guarantee in the following cases: • When the damage is caused by delay in making the warranty claim and / or delays in the performance of work by guarantee, no right to compensation or extension warranty. • It is the responsibility of the owner to transfer the unit, as well as the cost of labor that requires replacement defective part covered by the warranty, without this right to compensation claims or inability of use of the vehicle or for any inconvenience or costs any nature that it caused. • The dealer or seller and agent are SSR Motorsports of all responsibility and liability for any accident that may occur to persons and / or things, by and during use of the vehicle or by directly or indirectly cause from the same, even if the accident is attributable to manufacturing defects or material.

DIRT BIKE OWNERS MANUAL SSR150