DOCSLIB.ORG

Motor Oil Recycling

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Motor Oil Recycling N FFERSO Y OF JE COUNT Motor Oil Is A The EPA’s Office of Solid Waste has launched a campaign to promote the Hazardous Waste proper management of used motor oil called: A hazardous waste is a liquid, solid, gas or sludge waste that contains properties that “YOU DUMP IT, YOU DRINK IT” are dangerous or potentially harmful to For more EPA information, go to: the environment or human health. http://cfpub.epa.gov/npdes/stormwater Motor oil contains heavy metals, con- If you are unsure where to safely dispose MotorMotor OilOil taminants, antifreeze, and dirt discarded of your used motor oil, contact the by the car engine during use. Stormwater Management Division or the Oil improperly Solid Waste Recycling Coordinator at RecyclingRecycling 636-797-5043 disposed of in landfills, Oil destroys ditches, waterways, the delicate or dumped on the ecosystem of ground or in storm the stream. drains can migrate for a safer and into surface and healthier tomorrow ground water and into the nearest stream or lake. It only takes one gallon of oil to contaminate one million gallons of drinking water (USEPA 2000). Oil can seriously harm aquatic plants and animals. It coats fish gills, prevents oxygen from entering the water, clogs drainage facilities and affects sub- merged vegetation because it blocks the sunlight that is needed for photo- COUNTY OF JEFFERSON synthesis. In other words, it destroys the delicate ecosystem of the stream. County of Jefferson Stormwater Management Division Fortunately, used motor oil is dirty PO Box 100 rather than worn out, so it can be Hillsboro MO 63050 recycled. However, because motor oil is Stormwater toxic to humans, wildlife and plants, it Phone: 636-797-6228 Fax: 636-797-6227 Management should be disposed of at a local Division Email: [email protected] recycling or disposal facility. 636-797-6228 COLLECTION AND HOW IS RECYCLED TYPES OF RECYCLING RECYCLING OF USED MOTOR OIL USED? PROGRAMS MOTOR OIL Used motor oil is recycled in different ways. There are two types of recycling What we do with the used motor oil It can be reprocessed into fuel to heat and programs currently in use: drop-off from our cars plays an important role cool homes. Approximately 750 million locations and curbside collection. in balancing our desire for convenient gallons are reprocessed every year and Drop-off locations include service transportation with our desire for a marketed to asphalt plants, steel mills, boil- stations, recycling centers, auto parts clean and healthy environment today ers, pulp and paper mills, and cement kilns. retail stores, quick lubes, and landfills. and for future generations. Reprocessed motor oil can also be burned These locations are effective because Jefferson County, as well as the in furnaces for heat or in power plants to they are familiar, permanent, and petroleum industry in general, request generate electricity for conveniently that you recycle used motor oil at one homes, businesses, or located. of the collection sites for the purpose schools. It can be Curbside collec- of keeping used motor oil out of our blended for marine tion programs waterways and ground water fuels, mixed with allow consumers supplies. asphalts for paving, or to place their oil used to fuel industrial The next time you change your own on the curb for burners. It can be oil, you can make a difference by collection. It, used in specially recycling the oil from your car, truck, however requires designed municipal motorcycle, boat, a hauler to collect garages, space heaters Put used motor oil in a contaminant-free container with a secure RV or lawn- the oil. Most and automotive bays. lid and take to a recycling center. DO NOT dump oil down the mower. storm drain because it drains untreated to the nearest stream, curbside river or lake. Finally, used motor oil programs are By dropping off implemented by your used motor can be re-refined into lubricating oils that meet the same standards as virgin or new private waste haulers or municipal or oil at a recycling private recycling haulers. facility, you can oil. All these methods of recycling help to help prevent conserve valuable energy resources. pollution and Be responsible with used motor oil today and for COUNTY OF JEFFERSON conserve energy future generations. for a safer and healthier tomorrow. County of Jefferson Stormwater Management Division PO Box 100 Recycling Centers: Hillsboro MO 63050 Keep It Safe All Autozone & Jiffy Lube Stores Phone: 636-797-6228 Fax: 636-797-6227 B & L Sanitation—636-942-2557 Email: [email protected] .
Load more

Recommended publications
  • Advanced Petroleum-Based Fuels -- Diesel Emissions Control Project
    NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or any agency thereof. Available electronically at http://www.osti.gov/bridge Available for a processing fee to U.S. Department of Energy and its contractors, in paper, from: U.S. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062 phone: 865.576.8401 fax: 865.576.5728 email: mailto:[email protected] Available for sale to the public, in paper, from: U.S. Department of Commerce National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 phone: 800.553.6847 fax: 703.605.6900 email: [email protected] online ordering: http://www.ntis.gov/ordering.htm Printed on paper containing at least 50% wastepaper, including 20% postconsumer waste The test program and subsequent data analysis represent a collaborative effort of a technical working group consisting of representatives from the government and industry organizations listed on the front cover of this report.
    [Show full text]
  • Reduce Reuse Recycle Remanufacture
    STEEL - THE PERMANENT MATERIAL IN THE CIRCULAR ECONOMY AR ECONOMY BEN CUL EFI CIR TS E R R C E a U U w n D S m io E E a t t c R e u r i d a e l r s s c n o o n i s s s e i r v m a e t i 2 o O n C E n o E R i f t f U a ic R v o ie T n E n c C In y C Y FA C U LE N MA RE ts Jo duc bs pro Durable 1 CONTENTS Steel in the circular economy 3 Steel is essential to our modern world 5 Reduce 7 Decreasing the amount of material, energy and other resources used to create steel and reducing the weight of steel used in products. Use and reuse 11 Reuse is using an object or material again, either for its original purpose or for a similar purpose, without significantly altering the physical form of the object or material. Remanufacture 15 The process of restoring durable used steel products to as-new condition. Recycle 19 Melting steel products at the end of their useful life to create new steels. Recycling alters the physical form of the steel object so that a new application can be created from the recycled material. End notes 22 2 STEEL IN THE CIRCULAR ECONOMY A sustainable circular economy is one in which steel is fundamental to the circular economy. society reduces the burden on nature by ensuring The industry is continuing to expand its offer resources remain in use for as long as possible.
    [Show full text]
  • Higher-Quality Electric-Arc Furnace Steel
    ACADEMIC PULSE Higher-Quality Electric-Arc Furnace Steel teelmakers have traditionally viewed Research Continues to Improve the electric arc furnaces (EAFs) as unsuitable Quality of Steel for producing steel with the highest- Even with continued improvements to the Squality surface finish because the process design of steelmaking processes, the steelmaking uses recycled steel instead of fresh iron. With over research community has focused their attention 100 years of processing improvements, however, on the fundamental materials used in steelmaking EAFs have become an efficient and reliable in order to improve the quality of steel. In my lab steelmaking alternative to integrated steelmaking. In at Carnegie Mellon University, we have several fact, steel produced in a modern-day EAF is often research projects that deal with controlling the DR. P. BILLCHRIS MAYER PISTORIUS indistinguishable from what is produced with the impurity concentration and chemical quality of POSCOManaging Professor Editorof Materials integrated blast-furnace/oxygen-steelmaking route. steel produced in EAFs. Science412-306-4350 and Engineering [email protected] Mellon University Improvements in design, coupled with research For example, we recently used mathematical developments in metallurgy, mean high-quality steel modeling to explore ways to control produced quickly and energy-efficiently. phosphorus. Careful regulation of temperature, slag and stirring are needed to produce low- Not Your (Great-) Grandparent’s EAF phosphorus steel. We analyzed data from Especially since the mid-1990s, there have been operating furnaces and found that, in many significant improvements in the design of EAFs, cases, the phosphorus removal reaction could which allow for better-functioning burners and a proceed further.
    [Show full text]
  • Super-D® 3 Diesel Engine Oil 15W-40
    Super-D® 3 Diesel Engine Oil 15W-40 Premium Universal Fleet Kendall® Super-D 3 Diesel Engine Oil, SAE 15W-40, is a premium quality universal fleet engine oil designed for use in on-highway diesel trucks and off-highway Engine Oil diesel equipment, as well as in passenger cars and light trucks with either diesel or gasoline engines. It is recommended for use both in EGR-equipped diesel engines and in older, non-EGR diesel engines. It also will provide excellent protection for gasoline engines for use in mixed commercial fleets. Super-D 3 SAE 15W-40 is formulated with advanced additive technology to provide outstanding wear protection, soot control and bearing corrosion protection. Outstanding soot dispersancy protects against abrasive wear and soot-induced oil thickening, and ensures good low-temperature pumpability even with soot-laden oil. High dispersancy-detergency and a high alkaline reserve (TBN) provide extra protection in extended drain or severe service intervals, and in EGR-equipped engines. Super-D 3 SAE 15W-40 meets or exceeds the performance requirements of API Service Categories CI-4 and SL, API CI-4 PLUS, and leading OEM specifications and worldwide standards for diesel engine oils. It is backward serviceable for use where API CH-4 or earlier “C” category engine oils, or the concurrent earlier OEM specifications, are specified. Applications • On-highway diesel trucks equipped with cooled-EGR, ACERT or other technologies to meet 2004 and earlier exhaust emission standards • Older diesel equipment with conventional, non-EGR engines • Mixed fleets with both diesel and gasoline-fueled vehicles • Off-highway construction, earth moving and mining equipment • Farm equipment with diesel or gasoline engines Super-D 3 SAE 15W-40 is licensed or OEM-certified for: • API Service CI-4 with CI-4 PLUS, CI-4, CH-4, SL • Cummins CES 20078 • Detroit Diesel DFS 93K214 • Mack EO-N Premium Plus 03 • Mercedes-Benz Sheet 228.3 • Renault VI RLD-2 • Volvo VDS-3 KendallMotorOil.com U.S.
    [Show full text]
  • STEEL in the CIRCULAR ECONOMY a Life Cycle Perspective CONTENTS
    STEEL IN THE CIRCULAR ECONOMY A life cycle perspective CONTENTS Foreword 3 The circular economy 4 Life cycle thinking 6 The life cycle assessment (LCA) approach 8 worldsteel’s LCA methodology and life cycle inventory (LCI) database 10 Sustainability and life cycle assessment 12 LCA in the steel industry 14 LCA by life cycle phase 15 Raw materials and steel production 15 Markets for by-products 16 Manufacturing and use 16 Reuse and remanufacturing 18 Recycling 19 LCA initiatives 20 Regional and global initiatives 21 Market sector initiatives 22 Construction 22 Automotive 24 Packaging 25 End notes 28 Glossary 29 Cover image: Steel staircase, office building, Prague, Czech Republic Design: double-id.com FOREWORD We live in a rapidly changing world with finite resources. Too many legislative bodies around the world At the same time, improvements in standards of living still enact regulations which only affect the “use and eradication of poverty, combined with global phase” of a product’s life, for example water and population growth, exert pressure on our ecosystems. energy consumption for washing machines, energy consumption for a fridge or CO2 emissions whilst As steel is everywhere in our lives and is at the heart driving a vehicle. This focus on the “use phase” can of our sustainable future, our industry is an integral part lead to more expensive alternative lower density of the global circular economy. The circular economy materials being employed but which typically have a promotes zero waste, reduces the amount of materials higher environmental burden when the whole life cycle used, and encourages the reuse and recycling of is considered.
    [Show full text]
  • The Stainless Steel Family
    The Stainless Steel Family A short description of the various grades of stainless steel and how they fit into distinct metallurgical families. It has been written primarily from a European perspective and may not fully reflect the practice in other regions. Stainless steel is the term used to describe an extremely versatile family of engineering materials, which are selected primarily for their corrosion and heat resistant properties. All stainless steels contain principally iron and a minimum of 10.5% chromium. At this level, chromium reacts with oxygen and moisture in the environment to form a protective, adherent and coherent, oxide film that envelops the entire surface of the material. This oxide film (known as the passive or boundary layer) is very thin (2-3 namometres). [1nanometre = 10-9 m]. The passive layer on stainless steels exhibits a truly remarkable property: when damaged (e.g. abraded), it self-repairs as chromium in the steel reacts rapidly with oxygen and moisture in the environment to reform the oxide layer. Increasing the chromium content beyond the minimum of 10.5% confers still greater corrosion resistance. Corrosion resistance may be further improved, and a wide range of properties provided, by the addition of 8% or more nickel. The addition of molybdenum further increases corrosion resistance (in particular, resistance to pitting corrosion), while nitrogen increases mechanical strength and enhances resistance to pitting. Categories of Stainless Steels The stainless steel family tree has several branches, which may be differentiated in a variety of ways e.g. in terms of their areas of application, by the alloying elements used in their production, or, perhaps the most accurate way, by the metallurgical phases present in their microscopic structures: .
    [Show full text]
  • Owners Manual
    Owners Manual S&S® KN, P, and SH-Series Engines DISCLAIMER: • Consult an appropriate service manual for your motorcycle for correct S&S parts are designed for high performance, closed course, racing applications disassembly and reassembly procedures for any parts that need to be removed and are intended for the very experienced rider only. The installation of S&S parts to facilitate installation. may void or adversely effect your factory warranty. In addition such installation and • Use good judgment when performing installation and operating motorcycle. use may violate certain federal, state, and local laws, rules and ordinances as well Good judgment begins with a clear head. Don’t let alcohol, drugs or fatigue as other laws when used on motor vehicles used on public highways, especially in impair your judgment. Start installation when you are fresh. states where pollution laws may apply. Always check federal, state, and local laws before modifying your motorcycle. It is the sole and exclusive responsibility of the • Be sure all federal, state and local laws are obeyed with the installation. user to determine the suitability of the product for his or her use, and the user shall • For optimum performance and safety and to minimize potential damage to assume all legal, personal injury risk and liability and all other obligations, duties, carb or other components, use all mounting hardware that is provided and and risks associated therewith. follow all installation instructions. The words Harley®, Harley-Davidson®, H-D®, Sportster®, Evolution®, and all H-D Motorcycle exhaust fumes are toxic and poisonous and must not be breathed.
    [Show full text]
  • Used Motor Oil and Filter Recycling Guide
    USED MOTOR OIL & FILTER RECYCLING LEARN MORE Used Motor Oil and Oil Filter Recycling Guide Used Motor Oil is a Hazardous Waste Used motor oil is a hazardous waste that should never be put in the garbage or dumped in the storm drains or on the ground. Just one quart of motor oil can contaminate 250,000 gallons of water, creating health risks and environmental impacts across our community. Recycling is Free and Easy Used motor oil can be refined and Recycling right is more than an individual choice - it is part of how we are all reconditioned to become usable again. Paper, making a difference for a cleaner Oakland and more livable neighborhoods. steel, and plastic from used oil filters can also With your participation, Oakland’s Zero Waste program strives to divert all be recycled. recyclable and compostable material away from our landfills. There are three options for recycling used Your used motor oil recycling team is a partnership between the City of motor oil and filters: Oakland, California Waste Solutions, and CalRecycle. Our commitment to you is to provide the services and information you need to recycle right. 1. Curbside residential recycling pickup 2. Certified Collection Center drop-off locations When you pledge to recycle right, we’re here to help. 3. Household Hazardous Waste (HHW) collection facility Oaklanders Recycle No matter where you live in the City, there is a free and easy recycling option Contacts and Important Phone Numbers close to you. Visit recycleusedoil.org to find a location near you. California Waste Solutions ...............................................................(510) 625–5263 Used Motor Oil & Filters Improper Disposal is Illegal Disposal [email protected] www.calwaste.com 我們講中文 Hablamos español When you dispose hazardous materials properly, it benefits Household Hazardous Waste Drop Off ......................................
    [Show full text]
  • Steelmaking by Electric Arc Furnaces Cleaner, More Efficient
    EVRAZ Canadian Steel: Low Carbon Footprint November 2016 Electric Arc Furnaces (EAFs) with metal scrap: cleaner, more efficient • EVRAZ Regina utilizes two Electricity Steelmaking EAFs to make up to 1.1 Generation million tons of steel per Energy used CO2 emissions CO2 emissions year kg / ton of steel kWh / ton of steel grams / kWh -79% • Over 91% of steelmaking -64% -81% 2,081 in China is from Blast 4,624 764 Oxygen Furnaces (BOFs), which use iron ore, coking coal, and other inputs • For every one ton of steel scrap made into new steel, over 1,400kg of iron ore, 1,647 740kg of coal, and 120kg 441 147 of limestone are saved Overseas input shipping to China Blast EAF Blast EAF China Canada Furance Furnace Sources: BOF percentage: Worldsteel. Shipping emissions: National Technical University of Athens. Steelmaking: Midrex – Blast Furnace assuming 11% Scrap, EAF Use of 100% scrap. Scrap statistics: Worldsteel. Electricity Generation: IEA 2011 2 EVRAZ cleaner EAFs, Canada’s power generation outpace others Emissions from Steelmaking emissions and energy use energy generation Energy used CO2 emissions CO2 emissions kg / ton of steel kWh / ton of steel grams / kWh -79% -64% 2,081 4,624 -81% 764 1,526 3,419 2,327 476 470 929 1,647 441 147 China Germany Turkey EVRAZ Blast GermanyTurkey EAF China Turkey Germany Canada - BOF Canada Furnace - EAF - China Overseas shipping of inputs Sources: BOF percentage: Worldsteel. Shipping emissions: National Technical University of Athens, from China to BC, Europe to Houston. Steelmaking: Midrex – Blast Furnace assuming 11% Scrap, EAF Use of 100% scrap.
    [Show full text]
  • AISI | Electric Arc Furnace Steelmaking
    http://www.steel.org/AM/Template.cfm?Section=Articles3&TEMPLATE=/CM/HTMLDisplay.cfm&CONTENTID=12308 Home Steelworks Home Electric Arc Furnace Steelmaking By Jeremy A. T. Jones, Nupro Corporation SIGN UP to receive AISI's FREE e-news! Read the latest. Email: Name: Join Courtesy of Mannesmann Demag Corp. FURNACE OPERATIONS The electric arc furnace operates as a batch melting process producing batches of molten steel known "heats". The electric arc furnace operating cycle is called the tap-to-tap cycle and is made up of the following operations: Furnace charging Melting Refining De-slagging Tapping Furnace turn-around Modern operations aim for a tap-to-tap time of less than 60 minutes. Some twin shell furnace operations are achieving tap-to-tap times of 35 to 40 minutes. 10/3/2008 9:36 AM http://www.steel.org/AM/Template.cfm?Section=Articles3&TEMPLATE=/CM/HTMLDisplay.cfm&CONTENTID=12308 Furnace Charging The first step in the production of any heat is to select the grade of steel to be made. Usually a schedule is developed prior to each production shift. Thus the melter will know in advance the schedule for his shift. The scrap yard operator will prepare buckets of scrap according to the needs of the melter. Preparation of the charge bucket is an important operation, not only to ensure proper melt-in chemistry but also to ensure good melting conditions. The scrap must be layered in the bucket according to size and density to promote the rapid formation of a liquid pool of steel in the hearth while providing protection for the sidewalls and roof from electric arc radiation.
    [Show full text]
  • Uniform Fuels and Automotive Lubricants Regulation
    Handbook 130 – 2020 IV. Uniform Regulations G. Uniform Fuels and Automotive Lubricants Regulation G. Uniform Fuels and Automotive Lubricants Regulation Table of Contents Section Page Section 1. Definitions ............................................................................................................................................... 187 1.1. ASTM (ASTM International). ................................................................................................................ 187 1.2. Antiknock Index (AKI). .......................................................................................................................... 187 1.3. Automatic Transmission Fluid. ............................................................................................................... 187 1.4. Automotive Fuel Rating. ......................................................................................................................... 187 1.5. Automotive Gasoline, Automotive Gasoline-Oxygenate Blend. ............................................................ 187 1.6. Aviation Gasoline. .................................................................................................................................. 187 1.7. Aviation Turbine Fuel. ............................................................................................................................ 187 1.8. Biodiesel. ...............................................................................................................................................
    [Show full text]
  • The Energy Benefit of Stainless Steel Recycling
    ARTICLE IN PRESS Energy Policy ] (]]]]) ]]]–]]] www.elsevier.com/locate/enpol The energy benefit of stainless steel recycling Jeremiah Johnsona,b,Ã, B.K. Reckb, T. Wangb, T.E. Graedelb aProgram in Environmental Engineering, Yale University, New Haven, CT, USA bCenter for Industrial Ecology, School of Forestry and Environmental Studies, Yale University, 205 Prospect Street, New Haven, CT 02140, USA Received 5 December 2006; accepted 21 August 2007 Abstract The energy used to produce austenitic stainless steel was quantified throughout its entire life cycle for three scenarios: (1) current global operations, (2) 100% recycling, and (3) use of only virgin materials. Data are representative of global average operations in the early 2000s. The primary energy requirements to produce 1 metric ton of austenitic stainless steel (with assumed metals concentrations of 18% Cr, 8% Ni, and 74% Fe) is (1) 53 GJ, (2) 26 GJ, and (3) 79 GJ for each scenario, with CO2 releases totaling (1) 3.6 metric tons CO2, (2) 1.6 metric tons CO2, and (3) 5.3 metric tons CO2. Thus, the production of 17 million metric tons of austenitic stainless steel in 2004 used 17 approximately 9.0 Â 10 J of primary energy and released 61 million metric tons of CO2. Current recycling operations reduce energy use 17 by 33% (4.4 Â 10 J) and CO2 emissions by 32% (29 million tons). If austenitic stainless steel were to be produced solely from scrap, which is currently not possible on a global level due to limited availability, energy use would be 67% less than virgin-based production and CO2 emissions would be cut by 70%.
    [Show full text]