DOCSLIB.ORG

PATINA Tool Sale and Auction – Friday October 16 and Saturday

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

PATINA Tool Sale and Auction – Friday October 16 and Saturday October 17, 2020 Damascus Volunteer FD Activity Center – 10211 Lewis Road, Damascus MD, 20872 Tailgating Dealer Sales Auction Tailgating (outside) all day Friday October 16, and Saturday October 17 Dealer Sales (inside Hall) Friday from noon to 5 pm early birds; Saturday 7 am early birds; 8 am general public Auction (inside Hall) Saturday October 17, from 2 pm to 5 pm Lot # Qty. Maker Model/Item Description Photo (click to enlarge) 1 1 Keen Kutter Gas Can 5 gallons 2 1 Schlage Door Lock Mortise Set 3 9 Buck, Stanley, Bench/Modern Various Sizes Craftsman Chisels 4 1 Seigley Plow Plane For Parts 5 10 Stanley Leather Tape For 30 foot size tape Measure Belt Holster 6 4 Fordson, Smith, Misc. Wrenches 8 inch, 10 inch sizes Trimount 7 10 Assorted Patented Pliers Various types Makers 8 25 Powermatic, Planer, Jointer Various sizes Freud blades, Saw chains 9 21 M Co. USA, and Tapered Shank Various sizes Other Makers Forstner Bits 1874 patent 10 1 Stanley No. 945 Bit Brace 6 inch size 11 3 Stanley Planes One No. 5, and two No. 78 12 1 Stanley No. 45 plane With cam and 1 cutter, Type 7 13 4 Sargent Planes One No. 507 block rabbet plane, plus three parts planes 14 1 Sargent Combination 9 ¾ Inches size, with 1 cutter Plane 15 1 Sargent Combination 9 ¾ Inches size Plane 16 14 Sargent Notched Cutters Various sizes, includes cloth for Combination pouch Plane 17 1 Craftsman Combination Includes cloth pouch (made by Plane with set of Sargent) 18 cutters 18 1 P. Chapin Large wooden Plane is 4 1/4 inches wide (Baltimore) plane with Quirk Ovolo and Bead 19 1 W.H. Livingston Plow Plane 2*, Includes one cutter. & Co. (New York) 20 1 J. A. McCellus Side Bead Plane ¾ Inch size ca. 1837 3* Rarity 21 2 A. Miller (New Wooden planes 3* #8 hollow plane, and 3/16 York), and H. inch Center Bead plane Chapin 22 1 F. Curtis Complex molding 3* (Boston) plane Marked “Inch” 1/2 ca. 1818 23 1 P. Chapin & Handled Sash 3* Scidenstricker Plane Dual cutters 24 1 P. Chapin Sash Plane Dual cutters (Baltimore) Good condition 25 5 Howland, Wooden Planes 1 hollow, and 4 round planes. Auburn, Way & Good condition Sherman 26 2 Way & Wooden Planes 22 inch Razee jointer plane, Sherman and plow plane. (Plow) 27 2 European Plow Planes Nuts inside body. Good condition 28 4 Stanley and Transitional Sargent Planes 29 3 Ohio Tool Co., Plow Planes E.C. Carter 30 3 European (2) Plow Planes, Planes and (1) Moving Fillister Plane 31 1 R.W. Panel Raising 3 Inch cutting width MacCubbin Plane (Baltimore) 32 1 Unmarked Mahogany Infill With H. York 2 ¼ inch wide Smoother Plane blade 33 1 Stanley Miller’s Patent With one blade. Sweetheart Plane No. 141 logo. 34 1 J.B Mack Susquehanna Co. 2* Panel Raising 2 inch cutter width Plane 35 7 Unmarked ¼ Inch Socket Mint condition, 3 chisels have Chisels with box. wood handles, and 4 are unhandled. 36 1 Fletcher (New Wooden Fore 4* York) Plane 37 1 John T. Brown Panel Raising ca. 1824-1843 Plane Good Condition 38 1 Sargent No. 3420 Good Condition Transitional Jack Plane 39 1 Unmarked Tool Cabinet For wall or table, 27”tall, 21” wide, and 7 ¾” deep 40 1 Baty Borehole gauge 50 to 150 mm. With wood case and accessories 41 1 Buck Brothers Chisel Display 42 1 Unmarked Foundry Pattern for Cast steel axe heads 43 2 Stanley 28 inch No. 30, Good vials and 26 inch No. 5 Levels 44 2 Stanley No. 3, and No. 5 Good vials Levels, both 24 Inches 45 2 Stanley and 28 inch Stanley Good vials Bedortha No. 5, and 26 inch Bedortha Levels 46 4 Various makers Foundry, timber, Macadamizing Hammers napping, and 47 Lot Various Woodworking 12 books related books 48 Lot Various Woodworking 17 books and gun related books 49 5 Chapin, Plow, Gutter and Kendall, Brown various wooden planes 50 1 J.T. Brown Panel Raising Skew blade Plane 51 2 Unmarked Panel Raising Skew Blade Plane 52 13 Assorted Chisels with Includes wooden mallet makers hickory handles made by Tom Law. 53 2 Unmarked Jointer Planes One 36 inches long, and the other 23 inches long 54 2 Unmarked Jointer/Cooper One 36 inches long, and the and Jointer other 21 inches long Planes 55 Pair Auburn Tool Pair of 7/8” Company tongue and groove planes 56 1 Possibly Millers Folding Beam 25” tall, and 28” deep Falls Boring Drill 57 1 Unmarked Blacksmith Vice 41” tall, with 4” jaws 58 1 Unmarked 9 Drawer Oak 17” tall, 24” wide, and 11” Tool Chest deep 59 1 USA marked Anvil 56 1/2 pounds, 18” overall length, 8” tall, and 3 ¼” wide. With sharp sides 60 1 Stanley No. 45 Plane with 15 cutters in two boxes. long and short Incudes craftsman made rods, and storage box 61 Pair Tburwell Pair of 3/4” tongue and groove planes 62 1 Champion Hand Crank (left side of picture) Blower 63 1 Unmarked Forge 18 Inches in diameter (right side of picture) 64 3 Auburn and Wooden planes One plow, one round, and one two other cornice plane. makers 65 1 Mathieson and Plow Plane Includes one cutter Son 66 2 Sandusky Wooden Planes One Moving Fillister, and one Dado 67 3 Stanley, and Transitional, two other Smooth, and makers round bottom planes 68 1 Stewart Plow Plane includes one cutter 69 2 Unmarked Mahogany Planes are 10 ½ long hollow and round planes 70 1 Mathieson Plow Plane includes one cutter 71 1 Bailey 1867 patent date With flat adjustment nut Compass Plane 72 1 Greenlee Large Drawknife With 14 inch blade 73 1 Unmarked Bronze Rabbet Plane with 1 inch blade 74 1 Stratton style Rosewood level 12 inch size 75 2 Stanley Levels, one 29” and one 26” No. 0 brass bound, 76 2 CS Company, Levels, One CS and one English? 10” brass and and English? 24” cherry level, walnut level 77 2 Henry Brown, Wood and brass and Slater Braces 78 2 Unmarked Chairmaker flat spokeshave, and round scraper 79 4 Sheffield, and Wooden Various sizes, three flat, and assorted Spokeshaves one round makers 80 2 Stanley and Scrapers Atkins wooden scraper, Stanley Atkins No. 80 scraper without blade 81 3 Assorted Scraper, makers Spokeshave, and Coopers knife 82 1 Unmarked Scorp 4 inch size 83 3 Stanley and Planes, Including one Craftsman block plane, and others one Stanley 60 one small bench plane 1/2 block plane, 84 2 Stanley No. 5 Jack Planes Good condition 85 1 Stanley No. 5 Jack Plane New, includes box and pamphlet 86 1 Craftsman No. 5 Jack Plane New, includes box, pamphlet, and extra blade 87 1 Stanley No. 4 Smooth New, includes box Plane 88 2 Disston and Back Saws Disston saw is 10 inches, and Bishop Bishop saw is 14 inches long 89 3 Alexander Saws, one pad One 15 ½ inch Panel Saw 8 ppi Marshall, saw 5” blade, Drabble & one Brass Back Sanderson Saw 8”, and 90 2 Unmarked Axes 91 3 Unmarked Blacksmith Various styles Hammers 92 1 Unmarked Adze 93 2 Berylco, & The Non-Sparking And, a bronze rocker groover Contractor’s Berylco H323 Tool Co. Mason’s Hammer 94 1 Unmarked Blacksmith Hot Chisel Hammer 95 1 Unmarked Chair Adze 96 1 Beatty and Large Slick 3 inch wide blade, and 32 Sons inches overall 97 1 Marked Small Portable Anvil 98 5 Stanley, Crown, Three T-bevels One 8 inch square, and one and others (from 13 ½ to 8 Crown marking knife inches in size), 99 1 WoodRiver Similar to Stanley Mint Condition Low Angle No. 65. Block Plane 100 1 WoodRiver Similar to Stanley Mint Condition, with extra Number 4 No. 604 blade Bench Plane 101 1 WoodRiver Similar to Stanley Mint Condition, with extra Number 6 No. 606 blade Bench Plane 102 2 Norton India 8” x 3” x ½ “ size In plastic cases Bench Stones, Fine and Medium grits 103 1 Stanley No. 65 low angle Complete. With Sweetheart block plane logo 104 1 Craftsman No. 3732 low Copy of Stanley No. 65 block (Made by angle block plane plane. Complete Millers Falls) 105 1 Unmarked Irish Chariot Plane 106 1 Unmarked Pair Very fancy Brass Trammel Points 107 1 Stanley No. 40 Ivory 12 Inch folding rule 108 1 Sampson – Ivory 12 Inch Aston folding rule (Birmingham) 109 1 Stanley Miller’s patent with fillister bed (crack) No. 41 plow plane 110 1 Stanley No. 193 Mint condition, includes Fiberboard Plane, Original box (top) and literature complete 111 1 Sargent No. 44 cabinet In original box scraper 112 1 Vaughn & Model 703 Similar in size to Stanley 603 Bushnell Smoothing Plane 113 1 Bailey Victor Block Missing front knob Plane 114 1 Chaplin Patent No. 8 With iron knob and tote Plane 115 1 Stanley No. 12 early 24 Excellent Condition. With inch folding rule gunter scale (forerunner of the slide rule) 116 1 Stanley No. 50 1 ½ inch size. Everlasting Chisel. 1 ½ inch size. 117 1 Preston No. 1368 8 inch overall length, with 1 ¼ Shoulder Plane inch blade 118 1 Prentiss Mini Vise Hall & Cook patent, Swivel base 119 1 L. Case Moving Fillister Nicker is missing Plane 120 1 Turner Double Iron Crisp condition Complex Molding Plane 121 1 Stanley 71 ½ Router With one blade Plane 122 1 Stanley 12 ½ Scraper Without wood base 123 1 Stanley No.
Recommended publications
  • Newsletter of the Pacific Northwest Tool Collectors Volume XXXVI December 2019 No 3

    Newsletter of the Pacific Northwest Tool Collectors Volume XXXVI December 2019 No 3

    Newsletter Of the Pacific Northwest Tool Collectors Volume XXXVI December 2019 No 3 Meeting Dates 1 Dues for 2020 2 BITW Registration Form 4 August Meeting Notes 5 Scholarship Report 6 October Meeting Notes 8 November Meeting Notes 10 Scholarship Report 11 Disposing of your Tool Collection Bill Racine 13 Auction Results 15 Estate Items for Sale 25 Collectors Inventory Form 27 Advertizing 28 Pictures by Tim Cook & Jim Halloran 2020 Meeting Schedule January 11, Washington February 15, Oregon March 14, Washington April 4, Oregon May 16, Washington June 6, Oregon Flea Market August 13 – 15, Washington Best in the West September 12, Oregon October 10, Washington Jerry Lane’s November 14, Oregon 2 3 4 August 10, 2019 Meeting Notes Meeting held at Bill Racine’s in Hillsboro OR. President Racine opened the meeting with introduction of officers and volunteers. New Members were Rick Redden,Ty Vanorden, Treasurer’s Reports: by Bill Racine $14,924.11 in General Fund $ 3,652.17 in Scholarship Fund (thanks to 2 generous donations!) $ 1,500.00 in Best in the West Fund Announcements: Tool Sale Fee – Remember to pay 2% for all sales of tools. Old Business: Scholarship – Following discussion a motion was made by Steve Crow to have Mike Hyink continue to evaluate scholarship applications as he has in the past. Motion carried. New Business: BITW 2020 to be held at LaQuinta Inn,Tacoma WA. Contract has been signed. See the registration form on page xx or download from the website. Newsletter – Jim Halloran is our new Newsletter Editor. A committee consisting of Jacob Norton Steve Broderick, Jack Birky Doug Siemens, Jim Halloran, Steve Johnson, and Chuck Guilford will study future of the newsletter and report back to the club.
  • Students, Police Clash

    Students, Police Clash

    Push Atlantic Highlands Renewal SEE STORY BELOW Weather HOME •Mostly Many and cod today, THEMW Ugh SMt. Clear «oa coot to- night, low Is aid 4h Pair, lit. T Red Bank, Freehold 7" tie milder, tomorrow1! high la FINAL mid Mi. Sunday's outlook, le|r (^ Long Branch J ud seasonable, > MONMOUTH COUNTY'S HOME NEWSPAPER FOR 89 YEARS DIAL 741-0010 VOL 00, NO. 82 RED BANK, N. J., FRIDAY, OCTOBER 20, 1967 10c PER COPY PAGE ONE Middletown Still Hoping to Get New Library By LEE STARNES the complex is built. layout and style of the main library "leave much to be The reading room is exceptionally well stocked with the MIDDLETOWN — The trustees of the township library The township may acquire part or all of an estimated 50- desired." latest magazines and best sellers, but can accommodate three caid yesterday they had very little knowledge of what was acre tract on die north side of Kings Hwy. Mr. Makely headed The library, located on Kings Hwy. is filled to an overflow persons seated and only one person standing. happening-regarding the proposed new library building that the committee that recommended the site. Negotiations are capacity of 15,000 books. Because of the crowded conditions, locating a title in the has become a minor controversy here. being handled by Richard Seuffert, business administrator. "We have to get rid of books because we just can't find • card catalogue, waiting to get through the aisles and locating Committeeman Edward Makely told The Register "every- If the township acquires the plot, 10 acres will be for space for them here," he said.
  • AABTKJX0 Giesecke ©2004 by Prentice Hall, Inc

    AABTKJX0 Giesecke ©2004 by Prentice Hall, Inc

    Figure Number: 03-01 AABTKJX0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Principal Items of Equipment. Figure Number: 03-02 AABTKJY0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: The T-square. Figure Number: 03-03 AABTKJZ0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Testing the Working Edge of the Drawing Board. Figure Number: 03-04 AABTKKA0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Testing the T-square. Figure Number: 03-05 AABTKKB0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Placing Paper on Drawing Board. Figure Number: 03-06 AABTKKC0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Positions of Drafting Tape. Figure Number: 03-07 a-c AABTKKD0 Giesecke ©2004 by Prentice Hall, Inc. Engineering Graphics, 8E A Pearson Company Page Number: Drawing Pencils. Hard Medium Soft The hard leads in this group (left) These grades are for general These leads are too soft to be useful are used where extreme accuracy purpose work in technical drawing. in mechanical drafting. Their use for is required, as on graphical com- The softer grades (right) are used such work results in smudged, rough putations and charts and diagrams. for technical sketching, for letter- lines that are hard to erase, and the The softer leads in this group ing, arrowheads, and other free- lead must be sharpened continually. (right) are sometimes used for line hand work on mechanical These grades are used for art work work on engineering drawings, but drawings.
  • Paul Sellers' Workbench Measurements and Cutting

    Paul Sellers' Workbench Measurements and Cutting

    PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST NOTE When putting together the cutting list for my workbench, I worked in imperial, the system with which I am most comfortable. I was not happy, however, to then provide direct conversions to metric because to be accurate and ensure an exact fit this would involve providing measurements in fractions of millimetres. When I do work in metric I find it more comfortable to work with rounded numbers, therefore I have created two slightly different sets of measurements. This means that in places the imperial measurement given is not a direct conversion of the metric measurement given. Therefore, I suggest you choose one or other of the systems and follow it throughout. © 2017 – Paul Sellers v2 PAUL SELLERS’ WORKBENCH MEASUREMENTS AND CUTTING LIST WOOD QTY DESCRIPTION SIZE (IMPERIAL) SIZE (METRIC) (THICK X WIDE X LONG) (THICK X WIDE X LONG) 4 Leg 2 ¾” x 3 ¾” x 34 ⅜” 70 x 95 x 875mm 1 Benchtop 2 ⅜” x 12” x 66” 65 x 300 x 1680mm 2 Apron 1 ⅝” x 11 ½” x 66” 40 x 290 x 1680mm 1 Wellboard 1” x 12 ½” x 66” 25 x 320 x 1680mm 4 Rail 1 ½” x 6” x 26” 40 x 150 x 654mm 2 Bearer 1 ¼” x 3 ¾” x 25” 30 x 95 x 630mm 4 Wedge ⅝” x 1 ½” x 9” 16 x 40 x 228mm 4 Wedge retainer ⅝” x 1 ½” x 4” 16 x 40 x 100mm HARDWARE QTY DESCRIPTION SIZE (IMPERIAL) SIZE (METRIC) 1 Vise 9” 225mm Dome head bolts (including nuts and washers) for 4 ⅜” x 5” 10 x 130mm bolting legs to aprons 2 Lag screws (with washers) for underside of vise ½” x 2 ½” 12 x 65mm 2 Lag screws for face
  • ADB Staked Armchair

    ADB Staked Armchair

    STAKED ARMCHAIR Chapter 2 Armbows are diff icult creatures. here’s something about building an armchair that tips the mental scales for many woodworkers. Making a stool is easy – it’s a board withT legs. OK, now take your stool and add a backrest to it. Congrats – you’ve made a backstool or perhaps a side chair. But once you add arms to that backstool you have committed a serious act of geometry. You’ve made an armchair, and that is hard-core angle business. Yes, armchairs are a little more complicated to build than stools or side chairs. But the geometry for the arms works the same way as it does for the legs or the spindles for the backrest. There are sightlines and re- sultant angles (if you need them). In fact, I would argue that adding arms to a chair simplifies the geometry because you have two points – the arm and the seat – to use to gauge the angle of your drill bit. When you drill legs, for example, you are alone in space. OK, I’m getting ahead of myself here. The key point is that arms are no big deal. So let’s talk about arms and how they should touch your back and your (surprise) arms. Staked Armchair all sticks are on 2-3/4" centers 2-3/4" 4-1/2" 3-1/2" 65° 38° 2-1/2" 2-1/2" CHAPTER II 27 Here. This is where I like the back of the armbow to go. Its inside edge lines up with the outside edge of the seat.
  • Build a Plane That Cuts Smooth and Crisp Raised Panels With, Against Or Across the Grain – the Magic Is in the Spring and Skew

    Build a Plane That Cuts Smooth and Crisp Raised Panels With, Against Or Across the Grain – the Magic Is in the Spring and Skew

    Fixed-width PanelBY WILLARD Raiser ANDERSON Build a plane that cuts smooth and crisp raised panels with, against or across the grain – the magic is in the spring and skew. anel-raising planes are used Mass., from 1790 to 1823 (Smith may to shape the raised panels in have apprenticed with Joseph Fuller doors, paneling and lids. The who was one of the most prolific of the profile has a fillet that defines early planemakers), and another similar Pthe field of the panel, a sloped bevel example that has no maker’s mark. to act as a frame for the field and a flat Both are single-iron planes with tongue that fits into the groove of the almost identical dimensions, profiles door or lid frame. and handles. They differ only in the I’ve studied panel-raising planes spring angles (the tilt of the plane off made circa the late 18th and early 19th vertical) and skew of the iron (which centuries, including one made by Aaron creates a slicing cut across the grain to Smith, who was active in Rehoboth, reduce tear-out). The bed angle of the Smith plane is 46º, and the iron is skewed at 32º. Combined, these improve the quality of cut without changing the tool’s cutting angle – which is what happens if you skew Gauges & guides. It’s best to make each of these gauges before you start your plane build. In the long run, they save you time and keep you on track. Shaping tools. The tools required to build this plane are few, but a couple of them – the firmer chisel and floats – are modified to fit this design.
  • Pad Foot Slipper Foot

    Pad Foot Slipper Foot

    PAD FOOT SLIPPER FOOT The most familiar foot of the To me, the slipper foot is the three, the pad foot has plenty most successful design for of variations. In the simplest the bottom of a cabriole leg, and most common version the especially when the arrises 3 rim of the foot is ⁄4 in. to 1 in. on the leg are retained and off the floor and its diameter gracefully end at the point is just under the size of the of the foot. There’s a blend leg blank. A competent 18th- of soft curves and defined century turner easily could edges that just works. This have produced it in less than particular foot design was 5 minutes, perhaps explaining taken from a Newport tea its prevalence. This is my table in the Pendleton House interpretation of a typical New collection at the Rhode Island England pad foot. School of Design Museum. 48 FINE WOODWORKING W270BR.indd 48 7/3/18 10:24 AM A step-by-step guide to creating three distinct period feet for the cabriole leg BY STEVE BROWN One Leg, Three Feet n the furniture making program at North Bennet Street School, students usually find inspiration for Itheir projects in books from our extensive library. They’ll find many examples of period pieces, but SLIPPER FOOT TRIFID FOOT they’ll also find more contemporary work. What they won’t find is any lack of possibilities. Sometimes limit- To me, the slipper foot is the The trifid foot is similar to the ing their options is the hard part.
  • Surveying and Drawing Instruments

    Surveying and Drawing Instruments

    SURVEYING AND DRAWING INSTRUMENTS MAY \?\ 10 1917 , -;>. 1, :rks, \ C. F. CASELLA & Co., Ltd II to 15, Rochester Row, London, S.W. Telegrams: "ESCUTCHEON. LONDON." Telephone : Westminster 5599. 1911. List No. 330. RECENT AWARDS Franco-British Exhibition, London, 1908 GRAND PRIZE AND DIPLOMA OF HONOUR. Japan-British Exhibition, London, 1910 DIPLOMA. Engineering Exhibition, Allahabad, 1910 GOLD MEDAL. SURVEYING AND DRAWING INSTRUMENTS - . V &*>%$> ^ .f C. F. CASELLA & Co., Ltd MAKERS OF SURVEYING, METEOROLOGICAL & OTHER SCIENTIFIC INSTRUMENTS TO The Admiralty, Ordnance, Office of Works and other Home Departments, and to the Indian, Canadian and all Foreign Governments. II to 15, Rochester Row, Victoria Street, London, S.W. 1911 Established 1810. LIST No. 330. This List cancels previous issues and is subject to alteration with out notice. The prices are for delivery in London, packing extra. New customers are requested to send remittance with order or to furnish the usual references. C. F. CAS ELL A & CO., LTD. Y-THEODOLITES (1) 3-inch Y-Theodolite, divided on silver, with verniers to i minute with rack achromatic reading ; adjustment, telescope, erect and inverting eye-pieces, tangent screw and clamp adjustments, compass, cross levels, three screws and locking plate or parallel plates, etc., etc., in mahogany case, with tripod stand, complete 19 10 Weight of instrument, case and stand, about 14 Ibs. (6-4 kilos). (2) 4-inch Do., with all improvements, as above, to i minute... 22 (3) 5-inch Do., ... 24 (4) 6-inch Do., 20 seconds 27 (6 inch, to 10 seconds, 403. extra.) Larger sizes and special patterns made to order.
  • MICHIGAN STATE COLLEGE Paul W

    MICHIGAN STATE COLLEGE Paul W

    A STUDY OF RECENT DEVELOPMENTS AND INVENTIONS IN ENGINEERING INSTRUMENTS Thai: for III. Dean. of I. S. MICHIGAN STATE COLLEGE Paul W. Hoynigor I948 This]: _ C./ SUPP! '3' Nagy NIH: LJWIHL WA KOF BOOK A STUDY OF RECENT DEVELOPMENTS AND INVENTIONS IN ENGINEERING’INSIRUMENTS A Thesis Submitted to The Faculty of MICHIGAN‘STATE COLLEGE OF AGRICULTURE AND.APPLIED SCIENCE by Paul W. Heyniger Candidate for the Degree of Batchelor of Science June 1948 \. HE-UI: PREFACE This Thesis is submitted to the faculty of Michigan State College as one of the requirements for a B. S. De- gree in Civil Engineering.' At this time,I Iish to express my appreciation to c. M. Cade, Professor of Civil Engineering at Michigan State Collegeafor his assistance throughout the course and to the manufacturers,vhose products are represented, for their help by freely giving of the data used in this paper. In preparing the laterial used in this thesis, it was the authors at: to point out new develop-ants on existing instruments and recent inventions or engineer- ing equipment used principally by the Civil Engineer. 20 6052 TAEEE OF CONTENTS Chapter One Page Introduction B. Drafting Equipment ----------------------- 13 Chapter Two Telescopic Inprovenents A. Glass Reticles .......................... -32 B. Coated Lenses .......................... --J.B Chapter three The Tilting Level- ............................ -33 Chapter rear The First One-Second.Anerican Optical 28 “00d011 ‘6- -------------------------- e- --------- Chapter rive Chapter Six The Latest Type Altineter ----- - ................ 5.5 TABLE OF CONTENTS , Chapter Seven Page The Most Recent Drafting Machine ........... -39.--- Chapter Eight Chapter Nine SmOnnB By Radar ....... - ------------------ In”.-- Chapter Ten Conclusion ------------ - ----- -.
  • PDF Download Rustic Furniture Basics Pdf Free Download

    PDF Download Rustic Furniture Basics Pdf Free Download

    RUSTIC FURNITURE BASICS PDF, EPUB, EBOOK Doug Stowe | 144 pages | 12 Nov 2009 | Taunton Press Inc | 9781600850769 | English | Connecticut, United States Rustic Furniture Basics PDF Book Search Openings. Do you need to live in a legit log cabin to be considered rustic, or can one word apply so liberally to so many different design styles? Here's an opportunity to create something truly unique by using woodworking techniques that are as "green" as it gets. But before you get started, you'll need the guidance of a seasoned furniture maker. What Is White Flight? Easy to make, rustic furniture is also green through incorporating reclaimed and found materials. This book is not yet featured on Listopia. About Doug Stowe. Paperback , pages. Your email address has been successfully received. Modern Farmhouse. Design alternatives show how to apply the basic techniques to other projects. Styling your home in the rustic style will give you a welcoming retreat that pays perfect homage to all things natural and down to earth. Flea markets: Treasure-hunting at its finest with the extra appeal of being able to pick the brains of a fellow woodworker in person. As a young man back in Los Angeles he paid the bills as a "carpenter to the stars" before an encounter with George Lucas set him firmly on the road to silver screen success. Home What is rustic style? This maintenance is scheduled to end in about hours and 5 minutes No schedule found, reverting to max values. If you know what you're looking for, there's a good chance a bit of patience will pay off on this platform.
  • Jointing Sharpening Now Observe How the Clock

    Jointing Sharpening Now Observe How the Clock

    PROJECTS & TECHNIQUES Product tech – saw doctor PHOTOGRAPHS BY MARK HARRELL Rake Finding the Rake Rake is the degree of offset from vertical, and this angle governs whether you want an aggressive, ripping cut, or a clean, slower crosscut. Note the angle – we generally set rake for a rip filing somewhere between The saw 0° to 8°. Establish rake closer to zero for aggressive ripping in softwoods, and closer to 10° for dense hardwoods. Crosscut filings generally mandate 15° to 20°. Hybrid-filing finds the sweet spot at 10°. Bevel (aka ‘fleam’) doctor Bevel indicates whether you desire to knife the cutting edge of a sawtooth. Little to no bevel (between 0° and 8°), is best suited for rip filings. Again, the rule here is select closer to 0° for ripping softwoods, and gravitate closer to 8° for ripping hardwoods. will see I usually find that 5° for dedicated rip either way delivers a crisp, assertive action, and mitigates tear-out on the far side of the cut. As for crosscut filings, 15° to 20° delivers a 20° is the perfect bevel angle.” Don’t buy and somewhere in between for hybrid. clean, knife-like action when sawing across into it. Anyone who says they consistently Here’s why precise angles just don’t matter: the grain. Hybrid-filing finds the sweet spot hit a certain degree standard when hand- a rip-filed saw will crosscut, and a crosscut- you now for both at 10° to 12°. sharpening a saw is full of it. Again, the filed saw will rip. The point is, any properly important thing isn’t hitting a certain degree.
  • Beginner's Guide

    Beginner's Guide

    Hand woodworking Hand woodworking Red oak cut through the cells Stud joined with nails or screws and Mitre joint on a picture frame held with a dowel joint, both examples of using only glue The butt joint mechanical means to joint end grain to I’m going to start with the most basic long grain joint of all: the butt joint. This joint consists of two pieces of wood that a biscuit, mortise and tenon, dowels are simply butted against each other, or pocket screws in addition to glue. typically forming a ‘T’ joint or corner Picture frames are a good example joint in a cabinet face frame or mitred of a butt joint – here you can see the corners of a picture frame or box. result of a butt joint using only glue; The strongest butt joint consists of the wood has started to pull away due joining straight grain to straight, such to seasonal change. With joining end as when joining boards for a tabletop grain to long grain, where the wood is Lapped dovetail or half-blind dovetail – see issue 2, pages 51-54. This is moving at different rates, it is clear that because boards that are cut lengthwise a stronger joint is needed. are often used interchangeably, but preserve the grain structure, whereas while a halving and half lapped joint joining end grain to end grain or end Half-lap, halving joint or is a lapped joint, a lapped joint is not grain to straight grain slices through lap joint always a halved joint. cells that were once strong and the Let’s look at joining wood with another Here you can see a half-blind original strength of the board is lost.