IN-MOULD LABEL for thermoplastic and

thermoset plastic articles

Melamine label for dinnerware for label Melamine

[email protected] I www.ornamin.de I [email protected]

Tel. +49(0)571-95606-0 I Fax +49(0)571-95606-77 Fax I +49(0)571-95606-0 Tel.

Trippeldamm 10b I 32429 Minden I Germany I Minden 32429 I 10b Trippeldamm

Ornamin Dekorfolien GmbH & Co. KG Co. & GmbH Dekorfolien Ornamin www.ornamin.de

areas at our website: our at areas

ou can find more information about all our labelling labelling our all about information more find can ou Y since 1952 since

can rely on. rely can

injection moulding techniques for plastics that we we that plastics for techniques moulding injection

At any time we have a network of partners in in partners of network a have we time any At

measures.

results in order to determine subsequent subsequent determine to order in results the lyse Melamine label for dinnerware for label Melamine

- ana and site on trials injection the with assist

project specifications. We advise, make samples, samples, make advise, We specifications. project Products from the thermosets area thermosets the from Products

we develop a goal-oriented strategy to realise the the realise to strategy goal-oriented a develop we

. Together with our customers, customers, our with Together . company the of area

dedication and skill from our employees in every every in employees our from skill and dedication

Decor paper with non-skid for SMC applications SMC for non-skid with paper Decor

Manufacturing our labels requires a high level of of level high a requires labels our Manufacturing Our service Our

since 1952 1 Ornamin Broschüre _ 09.09.2014 _ Vorderseite engl Vorderseite _ 09.09.2014 _ Broschüre Ornamin 1

IN-MOULD LABEL for thermoplastic and

thermoset plastic articles

Melamine label for dinnerware for label Melamine

[email protected] I www.ornamin.de I [email protected]

Tel. +49(0)571-95606-0 I Fax +49(0)571-95606-77 Fax I +49(0)571-95606-0 Tel.

Trippeldamm 10b I 32429 Minden I Germany I Minden 32429 I 10b Trippeldamm

Ornamin Dekorfolien GmbH & Co. KG Co. & GmbH Dekorfolien Ornamin www.ornamin.de

areas at our website: our at areas

ou can find more information about all our labelling labelling our all about information more find can ou Y since 1952 since

can rely on. rely can

injection moulding techniques for plastics that we we that plastics for techniques moulding injection

At any time we have a network of partners in in partners of network a have we time any At

measures.

results in order to determine subsequent subsequent determine to order in results the lyse Melamine label for dinnerware for label Melamine

- ana and site on trials injection the with assist

project specifications. We advise, make samples, samples, make advise, We specifications. project Products from the thermosets area thermosets the from Products

we develop a goal-oriented strategy to realise the the realise to strategy goal-oriented a develop we

. Together with our customers, customers, our with Together . company the of area

dedication and skill from our employees in every every in employees our from skill and dedication

Decor paper with non-skid for SMC applications SMC for non-skid with paper Decor

Manufacturing our labels requires a high level of of level high a requires labels our Manufacturing Our service Our

since 1952 1 Ornamin Broschüre _ 09.09.2014 _ Vorderseite engl Vorderseite _ 09.09.2014 _ Broschüre Ornamin 1 1 Ornamin Broschüre _ 09.09.2014 _ Innenseite engl The company

The Ornamin Dekorfolien GmbH & Co. KG has been making IN-MOULD LABELS for the plastic fabricating industry for over 60 years. We develop and produce decorative labels for long-life products which enable durable use on the market. With our 35 employees, we can realise even the most unusual customer demands on schedule. In addition to high-tech compression, finishing and coating technologies, we also use digital printing solutions for making samples or small batches.

Customers

Our customers are active in the most varied branches of industry and are located around the world. Whether products for the automotive branch, the household or marketing sector, the beverage, aircraft or pharmaceutical industries, or the retail or consumer area in the form of packaging. They all appreciate the power of our innovation and development, our service and our own expectations for top quality.

The technology

Using printed and finished plastic labels is a common method for decorating long-life products. A distinction is made between the injection moulding technique (IML*) and the compression technique for thermoset applications (SMC/BMC*).

* IML = IN-MOULD LABELLING, SMC/BMC = SHEET MOULDING COMPOUND/BULK MOULDING COMPOUND

PP-label for kids suitcases PP-label for measuring cups PP-label for cat-toilets

Processing of Processing of thermoset films thermoplastic film (IML) (SMC/BMC) PolystyrolanwendungSAN-label for covers für Verpackungen PP-label for lunchboxes

Handling Form In-Mould Handling Form Injection 1 device label device compound Electrostatic 1 The weighed mass for compression charging is inserted into the mould.

IML Magazin 2 The mould is closed. SAN--label for measuring cups PC-label for power cases

The label is removed by a handling device from the store, After about 40% of the total pressing electrostatically charged and inserted into the injection moulding 3 time the mould is opened. The decorative machine tool. The electrostatic charge ensures that the foil keeps sheet with the colour page facing the the desired position in the mould during the injection moulding 1 Ornamin Broschüre _ 09.09.2014 _ Innenseite engl compressed material is loaded on the SAN-label with non-skid for airline trays PS-label for paint boxes process. pre-pressed item. The mould is closed and immediately The company Form Injection The mould is closed and the injection 4 opened slightly again (degassed/ 2 compound ventilated). Then it is immediately returned cycle can begin. In this cycle, the The Ornamin Dekorfolien GmbH & Co. KG has been making IN-MOULD LABELS for the plastic Products from the thermoplastics area compound is dissolved by the to full pressure. hot-moulding mass and can thus IML After the remaining 60% of the fabricating industry for over 60 years. We develop and produce decorative labels for long-life products Magazin form a uniform compound with the 5 total pressing time, the mould is which enable durable use on the market. SAN-label with non-skid for PS-label for ice buckets injection compound. opened. The decorated item is PP-label for the automotive parts PP-label for reusable cups PET-label for dust bins serving trays removed. With our 35 employees, we can realise even the most unusual customer demands on schedule. In

Optionally, the decorated item can be addition to high-tech compression, finishing and coating technologies, we also use digital printing 6 Form Decorated Form Injection enhanced with gloss powder (glazing), end product compound solutions for making samples or small batches. 3 which is uniformly distributed over the Our In-mould labels pressed part. Our labels are for decorating thermoplastics and thermosets. For the thermoplastics area, we use The mould is closed again. premium foils of plastic quality without exception: SAN, ABS, ASA, PS, PC, PET, PMMA, PP/PE in After the injection process, 7 the finished decorated part is strengths of 50 to 400 µm. For products of thermoset materials, special paper analogous films with removed from the mould. So Customers no additional post-processing additional impregnation are used. These are fabricated according to our specifications for the needs of the item is necessary. 8 The glossy, decorated part of the of our customers. In addition, the films can be finished, for example, a non-skid coating, a special mould is then removed. sealingOur customers suitable arefor dishwasheractive in the items, most variedetc. branches of industry and are located around the world. Whether products for the automotive branch, the household or marketing sector, the beverage, aircraft or pharmaceutical industries, or the retail or consumer area in the form of packaging. They all appreciate the power of our innovation and development, our service and our own expectations for top quality.

The technology

Using printed and finished plastic labels is a common method for decorating long-life products. A distinction is made between the injection moulding technique (IML*) and the compression technique for thermoset applications (SMC/BMC*).

* IML = IN-MOULD LABELLING, SMC/BMC = SHEET MOULDING COMPOUND/BULK MOULDING COMPOUND

PP-label for kids suitcases PP-label for measuring cups PP-label for cat-toilets

Processing of Processing of thermoset films PolystyrolanwendungSAN-label for covers für Verpackungen PP-label for lunchboxes thermoplastic film (IML) (SMC/BMC) PP-label for cover parts PET-label for paint boxes

Handling Form In-Mould Handling Form Injection 1 device label device compound Electrostatic 1 The weighed mass for compression charging is inserted into the mould.

IML Magazin 2 The mould is closed. SAN--label for measuring cups PC-label for power cases

The label is removed by a handling device from the store, After about 40% of the total pressing electrostatically charged and inserted into the injection moulding 3 time the mould is opened. The decorative machine tool. The electrostatic charge ensures that the foil keeps sheet with the colour page facing the the desired position in the mould during the injection moulding compressed material is loaded on the SAN-label with non-skid for airline trays PS-label for paint boxes process. pre-pressed item. The mould is closed and immediately Form Injection The mould is closed and the injection 4 opened slightly again (degassed/ 2 compound cycle can begin. In this cycle, the ventilated). Then it is immediately returned Products from the thermoplastics area compound is dissolved by the to full pressure. hot-moulding mass and can thus IML After the remaining 60% of the Magazin form a uniform compound with the 5 total pressing time, the mould is SAN-label with non-skid for PS-label for ice buckets injection compound. opened. The decorated item is PP-label for the automotive parts PP-label for reusable cups PET-label for dust bins serving trays removed.

Optionally, the decorated item can be 6 Form Decorated Form Injection enhanced with gloss powder (glazing), end product compound 3 which is uniformly distributed over the Our In-mould labels pressed part. Our labels are for decorating thermoplastics and thermosets. For the thermoplastics area, we use The mould is closed again. premium foils of plastic quality without exception: SAN, ABS, ASA, PS, PC, PET, PMMA, PP/PE in After the injection process, 7 the finished decorated part is strengths of 50 to 400 µm. For products of thermoset materials, special paper analogous films with removed from the mould. So no additional post-processing additional impregnation are used. These are fabricated according to our specifications for the needs of the item is necessary. 8 The glossy, decorated part of the of our customers. In addition, the films can be finished, for example, a non-skid coating, a special mould is then removed. sealing suitable for dishwasher items, etc.

PP-label for cover parts PET-label for paint boxes IN-MOULD LABEL for thermoplastic and

thermoset plastic articles

Melamine label for dinnerware for label Melamine

[email protected] I www.ornamin.de I [email protected]

Tel. +49(0)571-95606-0 I Fax +49(0)571-95606-77 Fax I +49(0)571-95606-0 Tel.

Trippeldamm 10b I 32429 Minden I Germany I Minden 32429 I 10b Trippeldamm

Ornamin Dekorfolien GmbH & Co. KG Co. & GmbH Dekorfolien Ornamin

www.ornamin.de

areas at our website: our at areas

ou can find more information about all our labelling labelling our all about information more find can ou Y since 1952 since

can rely on. rely can

injection moulding techniques for plastics that we we that plastics for techniques moulding injection

At any time we have a network of partners in in partners of network a have we time any At

measures.

results in order to determine subsequent subsequent determine to order in results the lyse Melamine label for dinnerware for label Melamine

- ana and site on trials injection the with assist

project specifications. We advise, make samples, samples, make advise, We specifications. project Products from the thermosets area thermosets the from Products

we develop a goal-oriented strategy to realise the the realise to strategy goal-oriented a develop we

. Together with our customers, customers, our with Together . company the of area

dedication and skill from our employees in every every in employees our from skill and dedication

Decor paper with non-skid for SMC applications SMC for non-skid with paper Decor

Manufacturing our labels requires a high level of of level high a requires labels our Manufacturing Our service Our

since 1952 1 Ornamin Broschüre _ 09.09.2014 _ Vorderseite engl Vorderseite _ 09.09.2014 _ Broschüre Ornamin 1 1 Ornamin Broschüre _ 09.09.2014 _ Innenseite engl The company

The Ornamin Dekorfolien GmbH & Co. KG has been making IN-MOULD LABELS for the plastic fabricating industry for over 60 years. We develop and produce decorative labels for long-life products which enable durable use on the market. With our 35 employees, we can realise even the most unusual customer demands on schedule. In addition to high-tech compression, finishing and coating technologies, we also use digital printing solutions for making samples or small batches.

Customers

Our customers are active in the most varied branches of industry and are located around the world. Whether products for the automotive branch, the household or marketing sector, the beverage, aircraft or pharmaceutical industries, or the retail or consumer area in the form of packaging. They all appreciate the power of our innovation and development, our service and our own expectations for top quality.

The technology

Using printed and finished plastic labels is a common method for decorating long-life products. A distinction is made between the injection moulding technique (IML*) and the compression technique for thermoset applications (SMC/BMC*).

* IML = IN-MOULD LABELLING, SMC/BMC = SHEET MOULDING COMPOUND/BULK MOULDING COMPOUND

PP-label for kids suitcases PP-label for measuring cups PP-label for cat-toilets

Processing of Processing of thermoset films thermoplastic film (IML) (SMC/BMC) PolystyrolanwendungSAN-label for covers für Verpackungen PP-label for lunchboxes

Handling Form In-Mould Handling Form Injection 1 device label device compound Electrostatic 1 The weighed mass for compression charging is inserted into the mould.

IML Magazin 2 The mould is closed. SAN--label for measuring cups PC-label for power cases

The label is removed by a handling device from the store, After about 40% of the total pressing electrostatically charged and inserted into the injection moulding 3 time the mould is opened. The decorative machine tool. The electrostatic charge ensures that the foil keeps sheet with the colour page facing the the desired position in the mould during the injection moulding compressed material is loaded on the SAN-label with non-skid for airline trays PS-label for paint boxes process. pre-pressed item. The mould is closed and immediately Form Injection The mould is closed and the injection 4 opened slightly again (degassed/ 2 compound cycle can begin. In this cycle, the ventilated). Then it is immediately returned Products from the thermoplastics area compound is dissolved by the to full pressure. hot-moulding mass and can thus IML After the remaining 60% of the Magazin form a uniform compound with the 5 total pressing time, the mould is SAN-label with non-skid for PS-label for ice buckets injection compound. opened. The decorated item is PP-label for the automotive parts PP-label for reusable cups PET-label for dust bins serving trays removed.

Optionally, the decorated item can be 6 Form Decorated Form Injection enhanced with gloss powder (glazing), end product compound 3 which is uniformly distributed over the Our In-mould labels pressed part. Our labels are for decorating thermoplastics and thermosets. For the thermoplastics area, we use The mould is closed again. premium foils of plastic quality without exception: SAN, ABS, ASA, PS, PC, PET, PMMA, PP/PE in After the injection process, 7 the finished decorated part is strengths of 50 to 400 µm. For products of thermoset materials, special paper analogous films with removed from the mould. So no additional post-processing additional impregnation are used. These are fabricated according to our specifications for the needs of the item is necessary. 8 The glossy, decorated part of the of our customers. In addition, the films can be finished, for example, a non-skid coating, a special mould is then removed. sealing suitable for dishwasher items, etc.

PP-label for cover parts PET-label for paint boxes 1 Ornamin Broschüre _ 09.09.2014 _ Innenseite engl The company

The Ornamin Dekorfolien GmbH & Co. KG has been making IN-MOULD LABELS for the plastic fabricating industry for over 60 years. We develop and produce decorative labels for long-life products which enable durable use on the market. With our 35 employees, we can realise even the most unusual customer demands on schedule. In addition to high-tech compression, finishing and coating technologies, we also use digital printing solutions for making samples or small batches.

Customers

Our customers are active in the most varied branches of industry and are located around the world. Whether products for the automotive branch, the household or marketing sector, the beverage, aircraft or pharmaceutical industries, or the retail or consumer area in the form of packaging. They all appreciate the power of our innovation and development, our service and our own expectations for top quality.

The technology

Using printed and finished plastic labels is a common method for decorating long-life products. A distinction is made between the injection moulding technique (IML*) and the compression technique for thermoset applications (SMC/BMC*).

* IML = IN-MOULD LABELLING, SMC/BMC = SHEET MOULDING COMPOUND/BULK MOULDING COMPOUND

PP-label for kids suitcases PP-label for measuring cups PP-label for cat-toilets

Processing of Processing of thermoset films thermoplastic film (IML) (SMC/BMC) PolystyrolanwendungSAN-label for covers für Verpackungen PP-label for lunchboxes

Handling Form In-Mould Handling Form Injection 1 device label device compound Electrostatic 1 The weighed mass for compression charging is inserted into the mould.

IML Magazin 2 The mould is closed. SAN--label for measuring cups PC-label for power cases

The label is removed by a handling device from the store, After about 40% of the total pressing electrostatically charged and inserted into the injection moulding 3 time the mould is opened. The decorative machine tool. The electrostatic charge ensures that the foil keeps sheet with the colour page facing the the desired position in the mould during the injection moulding compressed material is loaded on the SAN-label with non-skid for airline trays PS-label for paint boxes process. pre-pressed item. The mould is closed and immediately Form Injection The mould is closed and the injection 4 opened slightly again (degassed/ 2 compound cycle can begin. In this cycle, the ventilated). Then it is immediately returned Products from the thermoplastics area compound is dissolved by the to full pressure. hot-moulding mass and can thus IML After the remaining 60% of the Magazin form a uniform compound with the 5 total pressing time, the mould is SAN-label with non-skid for PS-label for ice buckets injection compound. opened. The decorated item is PP-label for the automotive parts PP-label for reusable cups PET-label for dust bins serving trays removed.

Optionally, the decorated item can be 6 Form Decorated Form Injection enhanced with gloss powder (glazing), end product compound 3 which is uniformly distributed over the Our In-mould labels pressed part. Our labels are for decorating thermoplastics and thermosets. For the thermoplastics area, we use The mould is closed again. premium foils of plastic quality without exception: SAN, ABS, ASA, PS, PC, PET, PMMA, PP/PE in After the injection process, 7 the finished decorated part is strengths of 50 to 400 µm. For products of thermoset materials, special paper analogous films with removed from the mould. So no additional post-processing additional impregnation are used. These are fabricated according to our specifications for the needs of the item is necessary. 8 The glossy, decorated part of the of our customers. In addition, the films can be finished, for example, a non-skid coating, a special mould is then removed. sealing suitable for dishwasher items, etc.

PP-label for cover parts PET-label for paint boxes 1 Ornamin Broschüre _ 09.09.2014 _ Innenseite engl The company

The Ornamin Dekorfolien GmbH & Co. KG has been making IN-MOULD LABELS for the plastic fabricating industry for over 60 years. We develop and produce decorative labels for long-life products which enable durable use on the market. With our 35 employees, we can realise even the most unusual customer demands on schedule. In addition to high-tech compression, finishing and coating technologies, we also use digital printing solutions for making samples or small batches.

Customers

Our customers are active in the most varied branches of industry and are located around the world. Whether products for the automotive branch, the household or marketing sector, the beverage, aircraft or pharmaceutical industries, or the retail or consumer area in the form of packaging. They all appreciate the power of our innovation and development, our service and our own expectations for top quality.

The technology

Using printed and finished plastic labels is a common method for decorating long-life products. A distinction is made between the injection moulding technique (IML*) and the compression technique for thermoset applications (SMC/BMC*).

* IML = IN-MOULD LABELLING, SMC/BMC = SHEET MOULDING COMPOUND/BULK MOULDING COMPOUND

PP-label for kids suitcases PP-label for measuring cups PP-label for cat-toilets

Processing of Processing of thermoset films thermoplastic film (IML) (SMC/BMC) PolystyrolanwendungSAN-label for covers für Verpackungen PP-label for lunchboxes

Handling Form In-Mould Handling Form Injection 1 device label device compound Electrostatic 1 The weighed mass for compression charging is inserted into the mould.

IML Magazin 2 The mould is closed. SAN--label for measuring cups PC-label for power cases

The label is removed by a handling device from the store, After about 40% of the total pressing electrostatically charged and inserted into the injection moulding 3 time the mould is opened. The decorative machine tool. The electrostatic charge ensures that the foil keeps sheet with the colour page facing the the desired position in the mould during the injection moulding compressed material is loaded on the SAN-label with non-skid for airline trays PS-label for paint boxes process. pre-pressed item. The mould is closed and immediately Form Injection The mould is closed and the injection 4 opened slightly again (degassed/ 2 compound cycle can begin. In this cycle, the ventilated). Then it is immediately returned Products from the thermoplastics area compound is dissolved by the to full pressure. hot-moulding mass and can thus IML After the remaining 60% of the Magazin form a uniform compound with the 5 total pressing time, the mould is SAN-label with non-skid for PS-label for ice buckets injection compound. opened. The decorated item is PP-label for the automotive parts PP-label for reusable cups PET-label for dust bins serving trays removed.

Optionally, the decorated item can be 6 Form Decorated Form Injection enhanced with gloss powder (glazing), end product compound 3 which is uniformly distributed over the Our In-mould labels pressed part. Our labels are for decorating thermoplastics and thermosets. For the thermoplastics area, we use The mould is closed again. premium foils of plastic quality without exception: SAN, ABS, ASA, PS, PC, PET, PMMA, PP/PE in After the injection process, 7 the finished decorated part is strengths of 50 to 400 µm. For products of thermoset materials, special paper analogous films with removed from the mould. So no additional post-processing additional impregnation are used. These are fabricated according to our specifications for the needs of the item is necessary. 8 The glossy, decorated part of the of our customers. In addition, the films can be finished, for example, a non-skid coating, a special mould is then removed. sealing suitable for dishwasher items, etc.

PP-label for cover parts PET-label for paint boxes IN-MOULD LABEL for thermoplastic and

thermoset plastic articles

Melamine label for dinnerware for label Melamine [email protected] I www.ornamin.de I [email protected]

Tel. +49(0)571-95606-0 I Fax +49(0)571-95606-77 Fax I +49(0)571-95606-0 Tel.

Trippeldamm 10b I 32429 Minden I Germany I Minden 32429 I 10b Trippeldamm

Ornamin Dekorfolien GmbH & Co. KG Co. & GmbH Dekorfolien Ornamin www.ornamin.de

areas at our website: our at areas

ou can find more information about all our labelling labelling our all about information more find can ou Y since 1952 since

can rely on. rely can

injection moulding techniques for plastics that we we that plastics for techniques moulding injection

At any time we have a network of partners in in partners of network a have we time any At

measures.

results in order to determine subsequent subsequent determine to order in results the lyse Melamine label for dinnerware for label Melamine

- ana and site on trials injection the with assist

project specifications. We advise, make samples, samples, make advise, We specifications. project Products from the thermosets area thermosets the from Products

we develop a goal-oriented strategy to realise the the realise to strategy goal-oriented a develop we

. Together with our customers, customers, our with Together . company the of area

dedication and skill from our employees in every every in employees our from skill and dedication

Decor paper with non-skid for SMC applications SMC for non-skid with paper Decor

Manufacturing our labels requires a high level of of level high a requires labels our Manufacturing Our service Our

since 1952 1 Ornamin Broschüre _ 09.09.2014 _ Vorderseite engl Vorderseite _ 09.09.2014 _ Broschüre Ornamin 1 IN-MOULD LABEL for thermoplastic and

thermoset plastic articles

Melamine label for dinnerware for label Melamine

[email protected] I www.ornamin.de I [email protected]

Tel. +49(0)571-95606-0 I Fax +49(0)571-95606-77 Fax I +49(0)571-95606-0 Tel.

Trippeldamm 10b I 32429 Minden I Germany I Minden 32429 I 10b Trippeldamm

Ornamin Dekorfolien GmbH & Co. KG Co. & GmbH Dekorfolien Ornamin www.ornamin.de

areas at our website: our at areas

ou can find more information about all our labelling labelling our all about information more find can ou Y since 1952 since

can rely on. rely can

injection moulding techniques for plastics that we we that plastics for techniques moulding injection

At any time we have a network of partners in in partners of network a have we time any At

measures.

results in order to determine subsequent subsequent determine to order in results the lyse Melamine label for dinnerware for label Melamine

- ana and site on trials injection the with assist

project specifications. We advise, make samples, samples, make advise, We specifications. project Products from the thermosets area thermosets the from Products

we develop a goal-oriented strategy to realise the the realise to strategy goal-oriented a develop we

. Together with our customers, customers, our with Together . company the of area

dedication and skill from our employees in every every in employees our from skill and dedication

Decor paper with non-skid for SMC applications SMC for non-skid with paper Decor

Manufacturing our labels requires a high level of of level high a requires labels our Manufacturing Our service Our

since 1952 1 Ornamin Broschüre _ 09.09.2014 _ Vorderseite engl Vorderseite _ 09.09.2014 _ Broschüre Ornamin 1