Setup Guide Supplied with Your Hub and Search for Available Wireless If You Have Followed All the Steps Sky Broadband Shield Helps You PLUG One of the Purple Networks

Home , Sky Broadband

Sky Broadband Shield Manage your account Setting up your hub with a Connecting your Sky Broadband Shield is our It’s easy to manage your account, pre-filtered master phone socket wireless devices simple broadband protection tool check your bills and find out all available at no extra cost for Sky that your Sky Broadband can do. 1 LOCATE the grey cable 1 On your wireless device, Still not working Broadband customers. Go to sky.com or MySky app. Setup Guide supplied with your hub and search for available wireless If you have followed all the steps Sky Broadband Shield helps you PLUG one of the purple networks. in this Setup Guide and are still control what your family can Carefully follow this connectors into your experiencing issues, go to the 2 Select your network from the access online, with three age Setup Guide to get the pre-filtered master socket, MySky App or go to sky.com/help rating settings, across all devices then PLUG the other purple list. When requested, enter best Sky Broadband your wifi password. connected to your network. It end into the purple port on Hub control panel also provides protection against experience the rear of your hub. You will find your wifi name and To login to the hub control panel, malware-infected and phishing password on the rear of your hub open an internet browser on websites which could harm your or connect card. a connected device and type devices or put your personal http://192.168.0.1/ details at risk. You can also connect devices by To view or change any hub TM You can get more information OR WPS (Wi-Fi Protected Setup ). settings requires a username about Sky Broadband Shield at 1 PRESS and HOLD the WPS and password. Your username is sky.com/shield button on the side of your admin. The default password is hub for a few seconds. When the wifi password found on the you release, the WPS button rear of your hub or connect card. 2 PLUG the blue end of the light will be flashing amber Sky power supply cable into Reset to factory settings the blue port on the back of 2 Activate WPS on your device. your hub and the other end Press and hold the reset button If the connection is successful, on the back of the hub until the directly into the mains and the WPS light will turn switch on. Power light begins to flash green. solid green This can take up to 10 seconds. When all the lights on the front of Don’t unplug or switch off your your hub turn green, the set up is hub while it resets. complete. When all the lights on the front of your hub turn green, the reset is Next, follow the steps in complete. Connecting your wireless devices

© Sky group of companies 2019. Sky, Sky Broadband, Sky Broadband Shield and MySky app are trade marks owned by the Sky group of companies. This product is exclusively for use in the UK, Channel Islands and Isle of Man and must only be used indoors. SKY CP LIMITED, GRANT WAY, TW7 5QD UNITED KINGDOM PKG-001081-00 Rev.1 8 May 2019 Model: SR203UK Your activation Meet your Sky Setting up date Broadband Hub your hub

Check your activation date on the 1 LOCATE your master phone 2 UNPLUG everything from 3 LOCATE the Master packaging. socket. your master phone socket. Microfilter supplied with your hub and PLUG directly into Please do not install your new Your master phone socket may your master phone socket. hub before this date, unless you be a thicker phone socket with a are already a Sky Broadband line in the middle and possibly a customer in which case you can BT or Openreach logo. install your hub immediately. For best speed and stability Your broadband can go live always connect your hub to your anytime up to midnight on your Sky Broadband Hub status lights WPS button and light master phone socket. activation date. (Wi-Fi Protected SetupTM) wifi name and password details

4 LOCATE the grey cable 5 PLUG the blue end of the Check what’s in supplied with your Sky power supply cable into the box hub and PLUG one of the the blue port on the back of purple connectors into the your hub and the other end purple port of your Master directly into the mains and Microfilter, then PLUG the switch on. other purple end into the purple port on the rear of When all the lights on the front of your hub. your hub turn green, the set up is User Documents Grey Cable complete. In some cases master phone sockets can be pre-filtered. Next, follow the steps in Pre-filtered master phone If you previously removed a Connecting your wireless devices Broadband Power Ethernet Reset OR sockets can be identified by phone cable or splitter, plug having two ports as per the it back into the port marked Sky Broadband Hub Sky Power Supply Master Microfilter Warning images shown. phone. Please read the ‘Important safety and product information’ If you have a pre-filtered master phone socket please proceed to For best performance leaflet before installing or using the ‘Setting up your hub with a pre-filtered master phone socket’ leave the hub permanently your hub. section overleaf >> switched on.