Vïvo Update Instructions
VÏVO UPDATE INSTRUCTIONS
This guide will help you update Müse for the simulator and the latest version of Vïvo. Before performing these steps, ensure the mannequin is powered on and the laptop (Instructor Workstation) is connected to the correct simulator WiFi network and you are able to run Müse.
IMPORTANT: The Vïvo tablet should not be used to download, extract zip files, or install any Müse updates. Instead, use a separate computer (Instructor Workstation) to access Müse and perform updates.
Step 1: Update Müse for the simulator. The Vïvo system update requires Müse version 2.7 or higher. If your Müse is not version 2.7 or higher, update Müse prior to updating Vïvo. To verify the Müse version: 1. Log in to Müse. 2. Click the Müse logo in the upper-left corner. 3. Ensure the Müse version is 2.7 or higher.
The Müse version
The Müse Version To update Müse: 1. From the Müse home screen, click on the System Administration button. 2. Click on System Settings. 3. Click on Select Update. 4. Open the *.msu update file. For more information on updating Müse, refer to document Installing Müse Updates located on the CAE Healthcare website under Support > Software Updates > View update instructions, or by clicking on View update instructions through this link: www.caehealthcare.com/software-updates . IMPORTANT: After the Müse update is complete, close and exit Müse. Restart both the simulator and the laptop. After restarting, verify the Müse version is 2.7 or higher. NOTE: Return to these instructions and continue with Step 2. 905K000722 v2 1 Vïvo Update Instructions
Step 2: Update Müse for Vïvo compatibility.
The Vïvo update file can be downloaded using any computer with an Internet connection. CAE Healthcare Instructor Workstation laptops should NOT be connected to the Internet. Once downloaded, the Vïvo update file must be transferred to the Instructor Workstation laptop via USB and then installed. Be sure to transfer the downloaded file from the USB drive to the desktop of the Instructor Workstation laptop before installing. DO NOT attempt to install a Vïvo update directly from a USB drive.
To update Müse for Vïvo compatibility: 1. From the CAE Healthcare website under Support > Software Updates, select your simulator, then download and extract the Vïvo update Zip file, for example Vïvo-x.x-update.zip (where x.x represents the latest version number). Or click this link: www.caehealthcare.com/software-updates . 2. After extracting the zip file, transfer the Vïvo update *.msu file (for example, vivo_upgrade_vx.x.msu) to the desktop of the Instructor Workstation laptop. 3. Ensure Müse is open. From the Home page, in the top, right-hand corner, click the System Administration button.
The System Administration Button The System Administration screen appears. 4. Click the System Settings button.
The System Settings button
The System Administration Screen The System Settings panel appears.
2 Vïvo Update Instructions
5. Click Select Update.
Select Update
The System Settings Panel A select file dialog box appears. 6. Navigate to the USB drive and open (double-click) the *.msu file with “vivo update” in the name. For example, vivo_upgrade_vx.x.msu.
The update file
The Update File Location The Uploading Update box appears and the software performs the update. This may take a few minutes to complete. Once the update has finished, a message appears telling you to reboot the simulator. If the installation fails, restart the simulator and Müse and attempt the installation again; before contacting CAE Healthcare customer service. After the Vïvo update is complete, close and exit Müse, then restart the simulator. IMPORTANT: Before running Vïvo on the tablet, make sure that no application of Müse is open for the simulator using Vïvo. Only one application of either Vïvo or Müse can be open at any given time across all platforms, laptop or tablet.
905K000722 v2 3 Vïvo Update Instructions
Step 3: Update Vïvo on the tablet.
After powering on the Vïvo tablet, tap the icon to launch Vïvo. An automatic notification to update the Vïvo app will appear. Tap OK to update the Vïvo tablet. The update will apply, then Vïvo will restart. Step 4: Verify Vïvo operation.
To verify Vïvo is installed and operating correctly: 1. On the Vïvo tablet, tap the icon to launch Vïvo.
2. Select run on the fly SCE and Begin Simulation. 3. If Vïvo is installed correctly, the simulator will start breathing and the mannequin will respond to the Vïvo tablet. For more information on using Vïvo, refer to the Vïvo Getting Started Guide included with the tablet and also available on the CAE Healthcare website under Support > User Guides > Vïvo, or here: www.caehealthcare.com/support/user-guides.
4