DOCSLIB.ORG

Applied Physics Topics 2

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Applied Physics Topics 2 Applied Physics Topics 2 Dr Andrey Varvinskiy Consultant Anaesthetist Torbay Hospital, UK EDAIC Paper B Lead and Examiner Conflict of interest declaration WHAT DECLARATION Grants/research support/P.I. N/A Employee N/A Consultation fees N/A Honoraria N/A Speakers bureau N/A Company sponsored N/A Stock shareholder N/A Spouse/partner N/A Scientific Advisory Board N/A Other Flight and hotel funded by ESA www.esahq.org TOPICS 2 Gas Laws Other Laws: Dalton, Avogadro Critical temperature Critical pressure Solubility Diffusion www.esahq.org Boyle’s Law (Boyle-Mariotte law) PV=k1 For a fixed amount of an ideal gas kept at a fixed T, pressure and volume are inversely proportional (while one doubles, the other halves) www.esahq.org Cylinder content Air,O2,Helium: by pressure gauge as P is proportional to V N2O and CO2: by weight. Liquified under Pressure www.esahq.org Application of Boyle’s Law for calculating a content of a cylinder p1 x V1 = p2 x V2 P1 = Gauge pressure of cylinder V1 = Physical volume of cylinder P2 = Atmospheric pressure V2 =Actual amount of gas stored in the cylinder For CD O2 cylinder : 230 x 2 = 1 x V2 = 460 L www.esahq.org Charles Law Law of Volumes V/T = k2 Constant pressure Gases expand when heated www.esahq.org Charles Law Practical Application Heat loss from the body - air next to the body surface gets warmer and moves up Patient loses heat Important in paediatrics www.esahq.org 3rd Perfect Gas Law P/T = k3 Constant volume the absolute pressure of gas varies directly to its absolute temperature www.esahq.org 3rd Perfect Gas Law Practical Application Medical gases are in cylinders at constant volume and high pressures (138 Bar in a full O2 cylinder) At high T, pressure will rise causing explosions Molybdenum steel can withstand pressures to 210 Bar. Weakening of metal in damaged cylinders are at a greater risk of explosion due to rise in temperature. www.esahq.org The Universal Gas Law Combining all the gas laws together yields an important equation: the universal or ideal gas law. PV = nRT P – Pressure of gas V - Volume n = the number of moles of the gas T – Temperature of gas R = the universal gas constant www.esahq.org Standard Temperature and Pressure (s.t.p.) Volumes of gases are affected by T and P hence there is a need to specify those And to correct results 273.15 K (00 C) 101.325 kPa www.esahq.org Dalton's Law Of Partial Pressures in a mixture of gases the pressure exerted by each gas is equal to the pressure which would be exerted if that gas alone was present PressureTotal = Pressure1 + Pressure2 ...Pressuren www.esahq.org Dalton's Law Practical Application In anaesthesia the partial pressures of gases in a mixture are of interest By applying Boyle’s and Dalton’s law the partial pressure of a gas in a mixture is obtained by multiplying the total pressure by the fractional concentration of the gas. www.esahq.org Dalton's Law Practical Application In a mixture of gases where 0.05% - CO2, 20.9%- O2 and 78.1% - N2 If the total Pressure is 100kPa the pCO2 – 0.05kPa, pO2- 20.9kPA, pN2 – 78.1kPa If the total pressure doubles (200kPa) then the partial pressure of each gas doubles. www.esahq.org Avogadro's Hypothesis equal volumes of gases at the same temperature and pressure contain equal numbers of molecules www.esahq.org Avogadro's Hypothesis Because the molecular weights of gases differ, there will be a different mass of any gas in a given volume at the same temperature and pressure Therefore it is more convenient to express a quantity of a gas in terms of the number of molecules, rather than in terms of mass. www.esahq.org AVAGADRO and the MOLE A MOLE is the quantity of a substance containing the same number of particles as there are atoms in 0.012kg of carbon12 There are 6.022 x 1023 atoms in 12 g of carbon 12. This is called Avagadro’s Number One mole of any gas at s.t.p. occupies 22.4litres www.esahq.org The Mole THUS: 2g of Hydrogen 32g of Oxygen 44g of Carbon Dioxide All occupy 22.4 litres at s.t.p www.esahq.org Ideal Gas Law The most significant consequence of Avogadro's law is that the ideal gas constant has the same value for all gases www.esahq.org Critical Temperature T above which a substance cannot be liquefied however much pressure is applied N2O: 36.5C O2: -119C CO2: 31C “Gas” applies to a substance above its CT “Vapour” is for a substance below its CT www.esahq.org Critical Pressure Pressure needed to liquefy the gas at its critical temp N2O - 72 bar O2 – 50 bar CO2 – 73 bar www.esahq.org Filling Ratio mass of gas in a cylinder/mass of water which would fill the cylinder For N2O it’s 0.75 in the UK, hotter climates – 0.67 Necessary to prevent explosion in case of rise in temp So N2O cylinder contains a mixture of liquid and vapour www.esahq.org Solubility and Henry’s Law At particular T the amount of a given gas dissolved in a given liquid is directly proportional to the partial pressure of the gas in equilibrium with the liquid different gases have different solubilities Overall: solubility of a gas depends on partial pressure, temp, gas and liquid concerned ↑temp of liquid =>↓dissolved gas www.esahq.org Partition Coefficients ratio of amount of a substance present in one phase as compared with another two phases must be of equal volume, specified temperature in equilibrium Tension is often used in place of partial pressure for gases in solution (don’t mix with surface tension) Could be applied to 2 different liquids (blood-gas, oil- gas) www.esahq.org Diffusion Movement of a substance from an area of high concentration to one of low concentration due to spontaneous random movement of its constituent particles Not an active process as no energy required www.esahq.org Fick’s law of diffusion rate of diffusion of a substance across a membrane is proportional its concentration gradient and inversely proportional to the tissue thickness diffusion of gas across a membrane or into or out of a liquid is proportional to the gas’s solubility in the liquid CO2is more soluble than O2 and so diffuses more rapidly across the alveolar membrane N2O more soluble than N2 - can diffuse into and expand closed cavities www.esahq.org Graham's Law Effect of molecular size Rate of diffusion of a gas is inversely proportional to the square root of the molecular weight Only applies to simple models and is inaccurate when dealing with complex biological membranes www.esahq.org Diffusion Summary Diffusion is proportional to the tension gradient D depends on area and thickness of membrane D is affected by molecular size (larger diffuse less rapidly) Liquids diffuse less rapidly than gases www.esahq.org QUESTIONS? Cross and Plunkett • www.esahq.org Title area First Name Last Name Department Hospital, Country.
Load more

Recommended publications
  • Unit 5 Interactive Notebook Gas Laws and Kinetic Molecular Theory Grant Union High School January 6, 2014 – January 29, 2014
    Unit 5 Interactive Notebook Gas Laws and Kinetic Molecular Theory Grant Union High School January 6, 2014 – January 29, 2014 Student Mastery Scale of Learning Goals Date Page Std Learning Goal Homework Mastery 1/6/14 1/7/14 1/8/14 1/9/14 1/10/14 1/13/14 1/14/14 1/15/14 1 1/16/14 1/21/14 1/22/14 1/23/14 1/24/14 1/27/14 1/28/14 1/29/14 Unit 5 EXAM 2 California Standard Gas Laws 4. The kinetic molecular theory describes the motion of atoms and molecules and explains the properties of gases. As a basis for understanding this concept: a. Students know the random motion of molecules and their collisions with a surface create the observable pressure on that surface. Fluids, gases or liquids, consist of molecules that freely move past each other in random directions. Intermolecular forces hold the atoms or molecules in liquids close to each other. Gases consist of tiny particles, either atoms or molecules, spaced far apart from each other and free to move at high speeds. Pressure is defined as force per unit area. The force in fluids comes from collisions of atoms or molecules with the walls of a container. Air pressure is created by the weight of the gas in the atmosphere striking surfaces. Gravity pulls air molecules toward Earth, the surface that they strike. Water pressure can be understood in the same fashion, but the pressures are much greater because of the greater density of water.
    [Show full text]
  • GAS LAWS OVERVIEW Created By: Julio Cesar Torres Orozco
    GAS LAWS OVERVIEW Created by: Julio Cesar Torres Orozco Background: The gas laws we will be discussing in this handout were created over four centuries ago, and have been helpful for scientist to find pressures, amounts, volumes and temperatures of gases under different conditions, and the relationship there exists between these variables. The fundamental gas laws are the following: Boyle’s Law, Charles’ Law, and Avogadro’s Law. We will also discuss the Gay-Lussac law When we combine these Laws, we get the Combined Gas Law and the Ideal Gas Law. GAS LAWS: ! Boyle’s Law: In 1662, Robert Boyle discovered the relationship between pressure and volume, assuming constant temperature and amount of gas. If the temperature remains constant, as the volume of a container increases, the pressure the gas will exert will decrease. Therefore: RELATIONSHIP: Pressure is inversely proportional to volume EQUATION: P1 x V1 = P2 x V2 GRAPHIC REPRESENTATION: GAS LAWS OVERVIEW Created by: Julio Cesar Torres Orozco ! Charles’ Law: In 1787, Jacques Charles discovered how temperature and volume are related, assuming that the amount of gas and pressure are constant. An increase in temperature will also increase the volume of the gas. Therefore: RELATIONSHIP: Volume is directly proportional to temperature EQUATION: GRAPHIC REPRESENTATION: ! Gay-Lussacs’ Law: This law shows the relationship there exists between temperature and pressure of gasses. Given a constant volume, if the temperature increases, the pressure will also increase. Therefore: RELATIONSHIP: Pressure is directly proportional to temperature EQUATION: GAS LAWS OVERVIEW Created by: Julio Cesar Torres Orozco GRAPHIC REPRESENTATION: ! Avogadro’s Law: In 1811, Amedeo Avogadro was able to identify the correlation between the amount of gas (n) and its volume, assuming that temperature and pressure are constant.
    [Show full text]
  • The Gas Laws A. Introduction. 1. Comparison of Three States of Matter
    CHAPTER FIVE: THE GASEOUS STATE Part One: The Gas Laws A. Introduction. 1. Comparison of three states of matter: solids condensed states liquids (high density, hard to compress) fluids (flow freely) gases (low density, easy to compress) 1 mole liquid H2O occupies 18 mL 1 mole H2O vapor at 100° C and atmospheric pressure occupies 30,600mL Thus, gas molecules must be far apart compared to molecular sizes and interact only weakly. 2. Composition of dry air by volume: 78% N2, 21% O2, 1% Ar, traces of other. 3. Properties of gases: a. Easily compressed into small volumes by applying pressure. b. Exert a pressure P on their surroundings; an equal pressure must be applied to confine them. c. Expand without limit to uniformly and completely occupy the volume of any container. d. Individual molecules exhibit a chaotic motion called diffusion. e. Properties described by gas laws. Show them “A Little Box of Air.” Chapter 5 Page 1 B. Pressure (P). (Section 5.1) 1. P = force per unit area produced by incessant collisions of particles with container walls. 2. Measurement of atmospheric pressure (Torricelli barometer): h ∝ pressure average height h: = 760 mm Hg at sea level P = 760 mm Hg = 1 atmosphere (atm) ≈ 30 inches 1 mm Hg = 1 “torr” SI unit of P is the pascal (Pa) 760 mm Hg: = 1 atm = 1.01325 x 105 Pa = 101.325kPa 3. Pressure of a column of liquid = hydrostatic pressure: P = gdh = accel. of gravity x density of liquid x height of column 2 g=9.81 m/s Chapter 5 Page 2 4.
    [Show full text]
  • Chapter 14: Gases
    418-451_Ch14-866418 5/9/06 6:19 PM Page 418 CHAPTER 14 Gases Chemistry 2.a, 3.c, 3.d, 3.e, 4.a, 4.c, 4.d, 4.e, 4.f, 4.g, 4.h I&E 1.b, 1.c, 1.d What You’ll Learn ▲ You will use gas laws to cal- culate how pressure, tem- perature, volume, and number of moles of a gas will change when one or more of these variables is altered. ▲ You will compare properties of real and ideal gases. ▲ You will apply the gas laws and Avogadro’s principle to chemical equations. Why It’s Important From barbecuing on a gas grill to taking a ride in a hot-air balloon, many activities involve gases. It is important to be able to predict what effect changes in pressure, temperature, volume, or amount, will have on the properties and behavior of a gas. Visit the Glencoe Chemistry Web site at chemistrymc.com to find links about gases. Firefighters breathe air that has been compressed into tanks that they can wear on their backs. 418 Chapter 14 418-451_Ch14-866418 5/9/06 6:19 PM Page 419 DISCOVERY LAB More Than Just Hot Air Chemistry 4.a, 4.c I&E 1.d ow does a temperature change affect the air in Ha balloon? Safety Precautions Always wear goggles to protect eyes from broken balloons. Procedure 1. Inflate a round balloon and tie it closed. 2. Fill the bucket about half full of cold water and add ice. 3. Use a string to measure the circumference of the balloon.
    [Show full text]
  • The Ideal and Combined Gas Laws PV = Nrt Or P1V1 = P2V2 T1 T2
    The Ideal and Combined Gas Laws PV = nRT or P1V1 = P2V2 T1 T2 Use your knowledge of the ideal and combined gas laws to solve the following problems. If it involves moles or grams, it must be PV = nRT 1) If four moles of a gas at a pressure of 5.4 atmospheres have a volume of 120 liters, what is the temperature? 2) If I initially have a gas with a pressure of 84 kPa and a temperature of 350 C and I heat it an additional 230 degrees, what will the new pressure be? Assume the volume of the container is constant. 3) My car has an internal volume of 2600 liters. If the sun heats my car from a temperature of 200 C to a temperature of 550 C, what will the pressure inside my car be? Assume the pressure was initially 760 mm Hg. 4) How many moles of gas are in my car in problem #3? 5) A toy balloon filled with air has an internal pressure of 1.25 atm and a volume of 2.50 L. If I take the balloon to the bottom of the ocean where the pressure is 95 atmospheres, what will the new volume of the balloon be? How many moles of gas does the balloon hold? (Assume T = 285 K) For chemistry help, visit www.chemfiesta.com © 2000 Cavalcade Publishing - All Rights Reserved MIXED GAS LAWS WORKSHEET Created by Tara L. Moore at www.learning.mgccc.cc.ms.us/pk/sciencedocs/gaslawwksheet.htm Directions: Answer each question below.
    [Show full text]
  • The Effects of Carbonated Beverages on Arterial Oxygen Saturation, Serum Hemoglobin Concentration and Maximal Oxygen Consumption
    AN ABSTRACT OF THE THESIS OF Max Waibler for the degree of Master of Science in Human Performance presented on August 21. 1991. Title : The Effects of Carbonated Beverages on Arterial Oxygen Saturation.Serum Hemoglobin Concentration and Maximal Oxygen Consumption Abstract approved :_Redacted for Privacy Dr. AWthony R. Wilcox Elite milers, Sir Roger Bannister and Joseph Falcon, have stated that the consumption of carbonated beverages hinders the performance of aerobic events. Oxygen transport is purportedly impaired by the consumption of carbonated beverages. The research on carbonated beverages has been limited to the effects on the digestive system, gastric emptying, and thermal heat stress in animals. The purpose of this study was to investigate the effects of consuming 28 ounces of carbonated beverages per day, for three weeks,on arterial oxygen saturation (Sa02), serum hemoglobin concentrations (Hb), and maximal oxygen consumption (VO2max) in experienced cyclists. Nine competitive cyclists and triathletes (aged 19-24 years, M= 21.67 years), with average weights and percent body fat of 76.51 kg and 11.4 percent respectively, were randomly assigned to a three week period of consuming 28 ounces of carbonated water or a three week period of no carbonated beverages. At the end of each three week period, a 5 c.c. blood sample was taken for Hb determination and the subjects performed a test of maximal oxygen consumption on a cycle ergometer while Sa02 was being monitored. The groups then crossed-over with respect to their treatment, and after another three week period, the same variables were measured. The Student's tstatistic was used to compare Sa02, Hb, and VO2max.
    [Show full text]
  • Empirical Gas Laws
    Empirical Gas Laws • Early experiments conducted to understand the relationship between P, V and T (and number of moles n) • Results were based purely on observation – No theoretical understanding of what was taking place • Systematic variation of one variable while measuring another, keeping the remaining variables fixed Boyle’s Law (1662) • For a closed system (i.e. no gas can enter or leave) undergoing an isothermal process (constant T), there is an inverse relationship between the pressure and volume of a gas (regardless of the identity of the gas) V α 1/P • To turn this into an equality, introduce a constant of proportionality (a) à V = a/P, or PV = a • Since the product of PV is equal to a constant, it must UNIVERSALLY (for all values of P and V) be equal to the same constant P1V1 = P2V2 Boyle’s Law • There is an inverse relationship between P and V (isothermal, closed system) https://en.wikipedia.org/wiki/Boyle%27s_law Charles’ Law (1787) • For a closed system undergoing an isobaric process (constant P), there is a direct relationship between the volume and temperature of a gas. V α T • Proceeding in a similar fashion as before, we can say that V = bT (the constant need not the same as that of Boyle’s Law!) and therefore V/T = b Charles’ Law (continued) • This equation presumes a plot of V vs T would give a straight line with a slope of b and a y-intercept of 0 (i.e. equation goes through the origin). • However the experimental data did have an intercept! • Lord Kelvin (1848) decided to extrapolate the data to see where it would
    [Show full text]
  • Introduction Boyle's
    BASIC GAS LAWS - 2012 NGA GAS OPERATIONS SCHOOL INTRODUCTION There are a number of very important reasons why everyone connected to the natural gas industry should understand the Basic Gas Laws. (1) Designing, building, and maintaining safe gas distribution and transmission systems can only be done by understanding and applying the laws of physics governing the behavior of natural gas. (2) Effective job performance in the natural gas industry requires an understanding of the technical language we encounter every day, a substantial portion of which is directly and indirectly related to the behavior of natural gas. (3) Safety is perhaps the most important driving force in our industry and many of the safety issues employees face relate to understanding how gases behave. (4) Many of the service issues arising from interaction with gas customers involve questions of measurement accuracy, pressure, and terminology that are not at all understood by end users but are related to the application of Basic Gas Laws. This class is not intended to cover the subject matter in depth but instead will focus on (3) Basic Gas Laws that everyone should conceptually understand. BOYLE'S LA W - (PRESSUREJ Of the (3) Basic Gas Laws discussed in this presentation, Boyle's Law describing the effect of pressure on gas is the most commonly applied and far-reaching in its impact in our industry. Therefore it will get the most attention in this presentation. For those who are not engineers or mathematically inclined, a very simple example of Boyle's Law at work in the real world is the use of scuba tanks by divers that need to work (and breathe) underwater.
    [Show full text]
  • Atmospheric Thermodynamics
    Atmospheric Thermodynamics Atmospheric Composition What is the composition of the Earth’s atmosphere? Gaseous Constituents of the Earth’s atmosphere (dry air) Fractional Concentration by Constituent Molecular Weight Volume of Dry Air Nitrogen (N2) 28.013 78.08% Oxygen (O2) 32.000 20.95% Argon (Ar) 39.95 0.93% Carbon Dioxide (CO2) 44.01 380 ppm Neon (Ne) 20.18 18 ppm Helium (He) 4.00 5 ppm Methane (CH4) 16.04 1.75 ppm Krypton (Kr) 83.80 1 ppm Hydrogen (H2) 2.02 0.5 ppm Nitrous oxide (N2O) 44.013 0.3 ppm Ozone (O3) 48.00 0-0.1 ppm Water vapor is present in the atmosphere in varying concentrations from 0 to 5%. Aerosols – solid and liquid material suspended in the air What are some examples of aerosols? The particles that make up clouds (ice crystals, rain drops, etc.) are also considered aerosols, but are more typically referred to as hydrometeors. We will consider the atmosphere to be a mixture of two ideal gases, dry air and water vapor, called moist air. Gas Laws Equation of state – an equation that relates properties of state (pressure, volume, and temperature) to one another Ideal gas equation – the equation of state for gases pV = mRT p – pressure (Pa) V – volume (m3) € m – mass (kg) R – gas constant (value depends on gas) (J kg-1 K-1) T – absolute temperature (K) This can be rewritten as: m p = RT V p = ρRT r - density (kg m-3) € or as: V p = RT m pα = RT a - specific volume (volume occupied by 1 kg of gas) (m3 kg-1) € Boyle’s Law – for a fixed mass of gas at constant temperature V ∝1 p Charles’ Laws: For a fixed mass of gas at constant pressure V ∝T € For a fixed mass of gas at constant volume p ∝T € € Mole (mol) – gram-molecular weight of a substance The mass of 1 mol of a substance is equal to the molecular weight of the substance in grams.
    [Show full text]
  • 133 Chapter 8: Gases and Gas Laws. the First Substances to Be Produced
    133 Chapter 8: Gases and Gas Laws. The first substances to be produced and studied in high purity were gases. Gases are more difficult to handle and manipulate than solids and liquids, since any minor mistakes generally results in the gas escaping to the atmosphere. However, the ability to produce gases in very high purity made the additional difficulty acceptable. The most common way of producing a gas was by some sort of chemical reaction, and the gas was collected by liquid displacement (either water or mercury). Figure 8.1 shows the general process of collecting gas by liquid displacement. Figure 8.1. Method of displacement for collecting gases. A water-filled container is inverted and placed into a water trough. A rubber hose is placed in the mouth of the container, with the other end attached to a reaction flask. The chemical reaction produces gas, which flows through the tube and displaces water from the container. By selecting the proper reactant masses, sufficient gas to fill 3 – 6 containers can be produced. Typically, the first container collected isn’t saved, since it contains residual air from the reaction flask. Using this general method, scientists produced and characterized hydrogen, oxygen, nitrogen, carbon dioxide, sulfur dioxide, chlorine, and several other gases. Once they obtained reasonably pure gases, systematic experimentation led to other discoveries. Generally, gases have properties substantially different than solids or liquids. Gases do not have fixed volumes; instead their volume depends directly upon pressure and temperature. Gases don’t have a fixed shape, but are said to “take the shape of their container”.
    [Show full text]
  • Respiratory Physiology
    Disclaimer: The Great Ormond Street Paediatric Intensive Care Training Programme was developed in 2004 by the clinicians of that Institution, primarily for use within Great Ormond Street Hospital and the Children’s Acute Transport Service (CATS). The written information (known as Modules) only forms a part of the training programme.The modules are provided for teaching purposes only and are not designed to be any form of standard reference or textbook. The views expressed in the modules do not necessarily represent the views of all the clinicians at Great Ormond Street Hospital and CATS. The authors have made considerable efforts to ensure the information contained in the modules is accurate and up to date. The modules are updated annually. Users of these modules are strongly recommended to confirm that the information contained within them, especially drug doses, is correct by way of independent sources.The authors accept no responsibility for any inaccuracies, information perceived as misleading, or the success of any treatment regimen detailed in the modules. The text, pictures, images, graphics and other items provided in the modules are copyrighted by “Great Ormond Street Hospital” or as appropriate, by the other owners of the items. Copyright 2004-2005 Great Ormond Street Hospital. All rights reserved. YEAR 1 ITU CURRICULUM 4 - Respiratory Physiology Andy Petros, September 2005 Updated Catherine Sheehan, Sanjiv Sharma, July 2012 Associated clinical guidelines/protocols: Fundamental Knowledge: List of topics relevant to PIC that will have been covered in membership examinations. They will not be repeated here. Anatomy: Anatomy of upper and lower respiratory tract, mediastinum, rib cage, muscles of respiration and diaphragm.
    [Show full text]
  • M.Sc. in Meteorology
    M.Sc. in Meteorology Physical Meteorology Prof Peter Lynch Mathematical Computation Laboratory Dept. of Maths. Physics, UCD, Belfield. Part 2 Atmospheric Thermodynamics 2 Atmospheric Thermodynamics Thermodynamics plays an important role in our quanti- tative understanding of atmospheric phenomena, ranging from the smallest cloud microphysical processes to the gen- eral circulation of the atmosphere. The purpose of this section of the course is to introduce some fundamental ideas and relationships in thermodynam- ics and to apply them to a number of simple, but important, atmospheric situations. The course is based closely on the text of Wallace & Hobbs 3 Outline of Material 4 Outline of Material • 1 The Gas Laws 4 Outline of Material • 1 The Gas Laws • 2 The Hydrostatic Equation 4 Outline of Material • 1 The Gas Laws • 2 The Hydrostatic Equation • 3 The First Law of Thermodynamics 4 Outline of Material • 1 The Gas Laws • 2 The Hydrostatic Equation • 3 The First Law of Thermodynamics • 4 Adiabatic Processes 4 Outline of Material • 1 The Gas Laws • 2 The Hydrostatic Equation • 3 The First Law of Thermodynamics • 4 Adiabatic Processes • 5 Water Vapour in Air 4 Outline of Material • 1 The Gas Laws • 2 The Hydrostatic Equation • 3 The First Law of Thermodynamics • 4 Adiabatic Processes • 5 Water Vapour in Air • 6 Static Stability 4 Outline of Material • 1 The Gas Laws • 2 The Hydrostatic Equation • 3 The First Law of Thermodynamics • 4 Adiabatic Processes • 5 Water Vapour in Air • 6 Static Stability • 7 The Second Law of Thermodynamics 4 The Kinetic Theory of Gases The atmosphere is a gaseous envelope surrounding the Earth.
    [Show full text]