DOCSLIB.ORG

Chemical Resistance-VF 105

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Chemical Resistance-VF 105 Chemical Resistance-VF 105 1= Suitable for constant immersion, constant flow, and/or areas with frequent spills and/or poor drainage. 2 = Suitable for at least 72 hours of containment and for intermittent spills. 3 = Suitable for intermittent spills when good housekeeping practices are followed. Maintenance may be expected if spills are not cleaned up. T = Insufficient data available to provide rating. Testing is recommended. Consult VersaFlex. NR = Not recommended. May be suitable for limited exposure applications under certain conditions. Consult VersaFlex. A = This chemical will attack silica aggregate. Silica must be totally encapsulated. Consult VersaFlex for non-silica aggregate recommendations. B = For constant immersion service, coating must be post cured 12 hours @ 150⁰F. Consult VersaFlex for alternate cure schedules. C = This chemical is unstable under some conditions, resulting in aggressive behavior. Consult VersaFlex. D = Coating may show some staining or color change when exposed to this chemical. NOTE: Ratings are based on 135⁰F maximum exposure temperature. In many cases service temperature can be as high as 200⁰F, but consult VersaFlex for recommendations beyond the 135⁰F limit. Acetaldehyde 3 Ammonium Lauryl Sulfate, 30% 1 Acetic Acid, 10% 2 Ammonium Nitrate 1 Acetic Acid, 30% 3 Ammonium Persulfate 1 Acetic Acid, 50% 3 Ammonium Sulfate 1 Acetic Acid, Glacial 3 Ammonium Sulfide 1 Acetic Anhydride T Ammonium Sulfite 1 Acetone 2 Amyl Acetate 2 Acetyl Bromide NR Amyl Alcohol 2 Acetyl Chloride 3 Aniline 2 Acrylic Acid 3 Aniline Hydrochloride 2 Acrylonitrile NR Antimony Chloride (TRI) 1 Adipic Acid 2 Aqua Regia NR Allyl Alcohol T Arsenic Acid 2 Allyl Chloride T Arsenious Acid 2 Aluminum Bromide 1 Aluminum Chloride 1 Barium Chloride 1 Aluminum Fluoride 1A Barium Hydroxide 1 Aluminum Hydroxide 1 Barium Sulfate 1 Aluminum Nitrate 1 Barium Sulfide 1 Aluminum Potassium Sulfate 1 Beer 1 Aluminum Sulfate 1 Benzal Chloride 2 Ammonia 2 Benzaldehyde T Ammonium Bisulate 1 Benzene 1 Ammonium Chloride 1 Benzene Sulfonic Acid 1 Ammonium Fluoride 1A Benzoic Acid 1 Ammonium Hydroxide 1 Benzoyl Chloride 2 Benzyl Alcohol 1 Chlorophenol 3 VersaFlex Incorporated ©2013 Rev: 05/10/2013 Benzyl Chloride 1 Chloropyridine (Tetra) 3 Black Liquor (paper) 1 Chlorosulfonic Acid NR Bleach 2C Chlorotoluene 1 Boric Acid 1 Chromic Acid, 10% 2 Brine 1 Chromic Acid, 50% 3 Bromine Gas (dry & wet) NR Chromic Chloride 1 Bromine Liquid NR Citric Acid 1 Bromine Water, 5% 3 Copper Chloride 1 Butanol 1 Copper Cyanide 1 Butyl Acetate 1 Copper Nitrate 1 Butyl Acrylate 1 Copper Sulfate 1 Butylamine NR Corn Oil 1 Butyl Carbitol 2 Cottonseed Oil 1 Butyl Carbitol Acetate 2 Cresol 3 Butyl Cellosolve Acetate 1 Cresylic Acid 3 Butyl Cellosolve Solvent 1 Crude Oil, Sour 1 Butyl Ether T Crude Oil, Sweet 1 Butyl Levuline Acid 2 Cumene 1 N-Butyric Acid 3 Cupric Ammonium Chloride 1 Cyclohexane 1 Cadmium Chloride 1 Cyclohexanol 2 Cadmium Plating Cyanide 1 Cyclohexanone 2 Calcium Bisulfite 1 Cymene 1 Calcium Chloride 1 Calcium Hydroxide 1 Dextrose 1 Calcium Hypochlorite 2C Dibutyl Phthalate 1 Calcium Nitrate 1 Dichloroacetic Acid 2 Calcium Sulfate 1 Dichlorobenzene 2 Calcium Sulfite 1 Diesel Fuel 1 Caprolactam 2 Diethylamine T Caprylic Acid 2 Diethylbenzene 1 Carbolic Acid NR Diethyl Ketone 1 Carbon Dioxide Gas 1 Dimethylaminopropylamine 3 Carbon Disulfide 3 Dimethyl Aniline 2 Carbon Tetrachloride 2 Dimethylformamide 3 Castor Oil 1 Dinitrobenzene T Cellosolve 1 Dinitro Butylphenol T Cellosolve Acetate 1 Dinitrotoluene T Chlorine Dioxide 2 Divinylbenzene 2 Chlorine Gas (Dry & Wet) 3 Dodecyl Alcohol (Lauryl) 1 Chlorine Water Saturated 1 Chloroacetic Acid 3 Epichlorohydrin 3 Chlorobenzene (Mono) 2 Ethoxyethanol 1 Chlorobutane 1 Ethoxylated Nonyl Phenol 1 Chloroform 3 Ethyl Acetate 2 Ethyl Acrylate 2 Hydrofluoric Acid, 20% 1A VersaFlex Incorporated ©2013 Rev: 05/10/2013 Ethyl Alcohol 1 Hydrofluoric Acid, 48% 2A Ethylamine T Hydrofluosilicic Acid, 10% 1A Ethylbenzene 1 Hydrofluosilicic Acid, 25% 2A Ethyl Bromide NR Hydrogen Peroxide 2 Ethyl Chloride 3 Hydrogen Sulfide Gas 1 Ethyl Chloroformate T Hypochlorous Acid 3 Ethylene Dichloride (EDC) 3 Ethylene Glycol 1 Iodine, Crystals 3 Ethylene Oxide T Isophorone 2 Ethyl Ether NR Isopropyl Acetate 1 Ethylhexyl Acrylate T Isopropyl Alcohol 1 Ethyl Sulfate 1 Isopropyl Ether 1 Fatty Acids 1 Jet Fuel 1 Ferric Chloride 1D Ferric Nitrate 1 Kerosene 1 Ferric Sulfate 1 Ketchup 1 Ferrous Chloride 1 Fluoboric Acid 1A Lactic Acid 2 Fluosilicic Acid, 10% 1A Lard 1 Formaldehyde 2 Lauric Acid 2 Formic Acid 3 Lauryl Chloride 1 Fuel Oil 1 Lead Acetate 1 Furfural T Lecithin 1 Furfuryl Alcohol 2 Levulinic Acid 1 Linseed Oil 1 Gasoline 1 Lithium Bromide 1 Glucose 1 Lithium Chloride 1 Glycerine 1 Lithium Hydroxide 1 Glycolic Acid 2 Lithium Hypochlorite 2C Gold Plating (Cyanide) 1 Grape Juice 1 Magnesium Bisulfite 1 Green Liquor 1 Magnesium Carbonate 1 Magnesium Chloride 1 Heptane 1 Magnesium Hydroxide 1 Hexane 1 Magnesium Sulfate 1 Hydrazine, 35% 3 Maleic Acid 3 Hydrazine Hydrate 3 Malic Acid 1 Hydriodic Acid, 20% 3 Mercuric Chloride 1 Hydrobromic Acid, 20% 2 Mercurous Chloride 1 Hydrobromic Acid, 48% 2 Mercury 1 Hydrochloric Acid, 10% 1 Methanol 2 Hydrochloric Acid, 20% 1 Methyl Acetate 2 Hydrochloric Acid, 37% 1D Methyl Alcohol 2 Hydrofluoric Acid, 10% 1A Methylamyl Alcohol 1 Methyl Chloride 3 Polyacrylic Acid 3 VersaFlex Incorporated ©2013 Rev: 05/10/2013 Methylene Chloride 3 Potassium Acetate 1 Methyl Ethyl Ketone 2 PotassiumBromide 1 Methyl Isobutyl Ketone 1 Potassium Carbonate, 10% 1 Methyl Methacrylate 2 Potassium Carbonate, 25% 1 Methyl Oleate 2 Potassium Chlorate 1 Milk 1 Potassium Chloride 1 Mineral Spirits 1 Potassium Cyanide 2 Molasses 1 Potassium Dichromate 2 Monochloroacetic Acid 2 Potassium Fluoride 1A Monoethanolamine 2 Potassium Hydroxide, 10% 1 Muriatic Acid 1 Potassium Hydroxide, 25% 1 Potassium Hydroxide, 50% 1 Naphtha 1 Potassium Nitrate 1 Naphthalene 1 Potassium Permanganate 3 Naphthenic Acid 2 Potassium Persulfate 1 Nickel Plating, Bright 2 Potassium Sulfate 1 Nitric Acid, 5% 2D Propanediol 2 Nitric Acid, 10% 3D Propionic Acid, 50% 3 Nitric Acid, 30% NR Propionic Acid, 100% NR Nitric Acid, 50% NR Propylene Glycol 1 Nitrobenzene 2 Pyridine NR Octanoic Acid 2 Salicylic Acid 1 N-Octyl Alcohol 1 Salt Brine 1 Oils, Animal 1 Silver Nitrate 1D Oils Mineral 1 Skydroll 1 Oils Vegetable 1 Sodium Acetate 1 Oleic Acid 3 Sodium Bicarbonate 1 Oleum NR Sodium Bisulfate 1 Oxalic Acid 2 Sodium Bisulfite 1 Sodium Bromate 1 Pentachloroethane 3 Sodium Carbonate 1 Perchloric Acid 3 Sodium Chlorate 2 Perchloroethylene 1 Sodium Chloride 1 Phenol, 5% 2 Sodium Chlorite 2 Phenol, 85% NR Sodium Chromate 1 Phosphoric Acid, 20% 1 Sodium Cyanide 1 Phosphoric Acid, 50% 1 Sodium Dichromate 1 Phosphoric Acid, 85% 2 Sodium Fluoride 1A Phosphoric Acid, 100% 3 Sodium Hydrosulfide 2 Phosphorous Acid 3 Sodium Hydroxide, 10% 1 Phosphorous Oxychloride 2 Sodium Hydroxide, 50% 1 Phosphorous Trichloride 3 Sodium Hypochlorite, 5% 2C Phthalic Acid 2 Sodium Hypochlorite, 18% 2C Picric Acid, 10% in Alcohol 3 Sodium Lauryl Sulfate, 20% 1 Sodium Oxalate 1 Trisodium Phosphate 1 VersaFlex Incorporated ©2013 Rev: 05/10/2013 Sodium Peroxide 2C Turpentine 1 Sodium Phosphate (Acid) 1 Sodium Phosphate (TRI) 1 Urea 2 Sodium Sulfate 1 Sodium Sulfide 1 Vinegar 2 Sodium Sulfite 1 Vinyl Chloride 3 Sodium Tartrate 1 Sodium Thiosulfate 1 Water, Deionized 1 Soybean Oil 1 Water, Demineralized 1 Stannic Chloride 1 Water, Distilled 1 Stannous Chloride 1 White Liquor (Paper) 1 Steric Acid 2 Wine 1 Styrene 2 Sugar/Sucrose 1 Xylene 1 Sulfamic Acid 3 Sulfite Liquor (Paper) 1 Zinc Chloride 1 Sulfur Dioxide 2 Zinc Sulfate 1 Sulfuric Acid, 10% 1 Sulfuric Acid, 25% 1 Sulfuric Acid, 50% 1 Sulfuric Acid, 75% 1 Sulfuric Acid, 98% 1D Sulfuric Acid, Oleum NR Sulfurous Acid (SAT'D) 1 Sulfur Trioxide 2 Tall Oil 1 Tannic Acid 1 Tartaric Acid 1 Tetrachloroethane 1 Tetrachloroethylene 1 Tatrahydrofuran NR Tetrahydrofurfuryl Alcohol 3 Titanium Tetrachloride 1 Toluene 1 Toluene Sulfonic Acid 1 Toluidine T Trichloracetic Acid 2 Trichlorobenzene 1 Trichloroethane 1 Trichloroethylene 2 Tricresyl Phosphate 1 Triethylamine 2 Triethylenetetramine 2 Triethyl Phosphite 1 VersaFlex Incorporated ©2013 Rev: 05/10/2013 .
Load more

Recommended publications
  • (A) 1) at First a Pair of Each 10G. of Sample Was Extracted with Ether by the Soxhlet's Apparatus for a Week
    52 [vol. 6, THE DISTRIBUTION OF PHOSPHORUS IN COW'S MILK AND THE SCHEME FOR THE SEPARATION OF PHOSPHATIDES By Rinjiro SASAKI (From the Institute of Agricultural Chemistry, College of Agriculture, Tokyo Imperial University) (Received 9th September 1930) A. The Distribution of Phosphorus in Cow's milk In order to extract the phosphatides, it is necessary first to determine the distribution of phosphorus in cow's milk. Liquid milk can not be extracted with ether or with other organic solvents owing to its large content of water. The substance applied in this experiment is the milk powder, dried by the Buflovak drum drier below 70•Ž. Its content of moisture is 4.498%, deter mined by the method of drying in the air bath of 105•Ž. The content of total phosphorus was determined(5) in the ash of sample which was burned with a little of fusing mixture. In 100g. of milk powder In 100g. of dry matter Total phosphorus 0.745g. 0.781g. The amounts of phosphorus, which are soluble in the various organic sol vents, were determined by extracting with three solvents in the following orders. (A) Ether-Acetone-Alcohol (B) Acetone-Ether-Alcohol (C) Alcohol-Ether-Acetone Experiment (A) 1) At first a pair of each 10g. of sample was extracted with ether by the Soxhlet's apparatus for a week. After the extraction had been comp leted, the extract was freed from ether and weighed. In 100g.of milkpowder In 100g.of dry matter Total ether matters soluble 3.609g. 3.779g. 2) The above extract was dissolved in a very little of ether.
    [Show full text]
  • Chemicals Used for Chemical Manufacturing Page 1 of 2
    Chemicals used for Chemical Manufacturing Page 1 of 2 Acetic Acid (Glacial, 56%) Glycol Ether PMA Acetone Glycol Ether PNB Acrylic Acid Glycol Ether PNP Activated Carbon Glycol Ether TPM Adipic Acid Glycols Aloe Vera Grease Aluminum Stearate Gum Arabic Aluminum Sulfate Heat Transfer Fluids Amino Acid Heptane Ammonium Acetate Hexane Ammonium Bicarbonate Hydrazine Hydrate Ammonium Bifluoride Hydrochloric Acid (Muriatic) Ammonium Chloride Hydrogen Peroxide Ammonium Citrate Hydroquinone Ammonium Hydroxide Hydroxylamine Sulfate Ammonium Laureth Sulfate Ice Melter Ammonium Lauryl Sulfate Imidazole Ammonium Nitrate Isobutyl Acetate Ammonium Persulfate Isobutyl Alcohol Ammonium Silicofluoride Calcium Stearate Dipropylene Glycol Isopropanolamine Ammonium Sulfate Carboxymethylcellulose Disodium Phosphate Isopropyl Acetate Antifoams Caustic Potash D'Limonene Isopropyl Alcohol Antifreeze Caustic Soda (All Grades) Dodecylbenzene Sulfonic Acid Isopropyl Myristate Antimicrobials Caustic Soda (Beads, Prills) (DDBSA) Isopropyl Palmitate Antimony Oxide Cetyl Alcohol Dowfrost Itaconic Acid Aqua Ammonia Cetyl Palmitate Dowfrost HD Jojoba Oil Ascorbic Acid Chlorine, Granular Dowtherm SR-1 Keratin Barium Carbonate Chloroform Dowtherm 4000 Lactic Acid Barium Chloride Chromic Acid EDTA Lanolin Beeswax Citric Acid (Dry and Liquid) EDTA Plus Lauric Acid Bentonite Coal Epsom Salt Lauryl Alcohol Benzaldehyde Cocamide DEA Ethyl Acetate Lecithin Benzoic Acid Copper Nitrate Ethyl Alcohol (Denatured) Lime Benzyl Alcohol Copper Sulfate Ethylene Glycol Linoleic Acid Bicarbonate
    [Show full text]
  • Raw Materials for Cosmetics
    Raw materials for cosmetics Sasol Performance Chemicals Raw materials for cosmetics About us Raw materials for cosmetics Register of product groups About us Register of product groups Sasol’s Performance Chemicals business unit markets a broad portfolio 1 Fats and oils/esters 16 of organic and inorganic commodity and speciality chemicals. Our Special esters ................................................... 16 business consists four key business divisions: Organics, Inorganics, Castor oil derivatives ........................................... 16 Wax and PCASG (Phenolics, Carbon, Ammonia and Speciality Gases). Others ........................................................... 16 About 6300 people (incl. employees from Regional Operating Hubs) 2 Fatty alcohols 18 – 21 in offices in 18 countries serve customers around the world with a Single fractions ................................................. 18 multi-faceted portfolio of state-of-the-art chemical products and Blends ........................................................... 20 solutions for a wide range of applications and industries. Monobranched Guerbet alcohols ............................... 20 Our key products include surfactants, surfactant intermediates, fatty alcohols, linear alkyl 3 Petrolatum 22 – 23 benzene (LAB), short-chain linear alpha olefins, ethylene, petrolatum, paraffin waxes, 4 Paraffin waxes 24 – 25 synthetic waxes, cresylic acids, high-quality carbon solutions as well as high-purity and ultra-high-purity alumina. Our speciality gases sub-division supplies
    [Show full text]
  • United States Patent Office Patented Apr
    3,030,421 United States Patent Office Patented Apr. 17, 1962 2 3,030,421 perature and under a reduced pressure. In the case of PROCESS FOR PREPARNG TRHYDROXY most of the catalysts the reaction products, which are free METHYL-PHOSPHINE s from solvents, solidify already when being cooled to room Martin Reuter and Ludwig Ortane, Frankfurt an Main, temperature. If, in the case of some catalysts, they Germany, assignors to Farbwerke Hoechst Aktienger 5 solidify only at a lower temperature and still contain to sellschaft vormas Meister Lucius & Briining, Frank a greater extent oily by-products and/or phosphonium furt am Main, Germany, a corporation of Gerinally hydroxide, they can be separated from the latter by filter No Drawing. Fied Jaa. 14, 1958, Ser. No. 708,764 ing or pressing. - - - Claims priority, application Germany Jan. 23, 1957 It is to be assumed that the crystalline main product 6 Canas. (C. 260-606.5) O of the present invention constitutes the hitherto unknown We have found that a new and valuable phosphorus trihydroxymethyl-phosphine. Main and by-products are compound carrying hydroxymethyl groups at the phos easily soluble in water and methanol and sparingly solu phorus atom can be prepared by reacting 1 mol of formal ble in fat dissolvers. dehyde with 4 mol of phosphine, preferably in the pres The reaction products of the invention can be used as ence of water, and in the presence of Small quantities of 5 insecticides, additives for lubricants, flame-proofing agents finely distributed metals that do not belong to the alkali for wood and textiles and as intermediates for these sub metals or alkaline earth metals and/or their compounds Staces.
    [Show full text]
  • NON-HAZARDOUS CHEMICALS May Be Disposed of Via Sanitary Sewer Or Solid Waste
    NON-HAZARDOUS CHEMICALS May Be Disposed Of Via Sanitary Sewer or Solid Waste (+)-A-TOCOPHEROL ACID SUCCINATE (+,-)-VERAPAMIL, HYDROCHLORIDE 1-AMINOANTHRAQUINONE 1-AMINO-1-CYCLOHEXANECARBOXYLIC ACID 1-BROMOOCTADECANE 1-CARBOXYNAPHTHALENE 1-DECENE 1-HYDROXYANTHRAQUINONE 1-METHYL-4-PHENYL-1,2,5,6-TETRAHYDROPYRIDINE HYDROCHLORIDE 1-NONENE 1-TETRADECENE 1-THIO-B-D-GLUCOSE 1-TRIDECENE 1-UNDECENE 2-ACETAMIDO-1-AZIDO-1,2-DIDEOXY-B-D-GLYCOPYRANOSE 2-ACETAMIDOACRYLIC ACID 2-AMINO-4-CHLOROBENZOTHIAZOLE 2-AMINO-2-(HYDROXY METHYL)-1,3-PROPONEDIOL 2-AMINOBENZOTHIAZOLE 2-AMINOIMIDAZOLE 2-AMINO-5-METHYLBENZENESULFONIC ACID 2-AMINOPURINE 2-ANILINOETHANOL 2-BUTENE-1,4-DIOL 2-CHLOROBENZYLALCOHOL 2-DEOXYCYTIDINE 5-MONOPHOSPHATE 2-DEOXY-D-GLUCOSE 2-DEOXY-D-RIBOSE 2'-DEOXYURIDINE 2'-DEOXYURIDINE 5'-MONOPHOSPHATE 2-HYDROETHYL ACETATE 2-HYDROXY-4-(METHYLTHIO)BUTYRIC ACID 2-METHYLFLUORENE 2-METHYL-2-THIOPSEUDOUREA SULFATE 2-MORPHOLINOETHANESULFONIC ACID 2-NAPHTHOIC ACID 2-OXYGLUTARIC ACID 2-PHENYLPROPIONIC ACID 2-PYRIDINEALDOXIME METHIODIDE 2-STEP CHEMISTRY STEP 1 PART D 2-STEP CHEMISTRY STEP 2 PART A 2-THIOLHISTIDINE 2-THIOPHENECARBOXYLIC ACID 2-THIOPHENECARBOXYLIC HYDRAZIDE 3-ACETYLINDOLE 3-AMINO-1,2,4-TRIAZINE 3-AMINO-L-TYROSINE DIHYDROCHLORIDE MONOHYDRATE 3-CARBETHOXY-2-PIPERIDONE 3-CHLOROCYCLOBUTANONE SOLUTION 3-CHLORO-2-NITROBENZOIC ACID 3-(DIETHYLAMINO)-7-[[P-(DIMETHYLAMINO)PHENYL]AZO]-5-PHENAZINIUM CHLORIDE 3-HYDROXYTROSINE 1 9/26/2005 NON-HAZARDOUS CHEMICALS May Be Disposed Of Via Sanitary Sewer or Solid Waste 3-HYDROXYTYRAMINE HYDROCHLORIDE 3-METHYL-1-PHENYL-2-PYRAZOLIN-5-ONE
    [Show full text]
  • Environmental Protection Agency § 117.3
    Environmental Protection Agency § 117.3 (4) Applicability date. This paragraph TABLE 117.3—REPORTABLE QUANTITIES OF (i) is applicable beginning on February HAZARDOUS SUBSTANCES DESIGNATED PUR- 6, 2020. SUANT TO SECTION 311 OF THE CLEAN (j) Process waste water means any WATER ACT—Continued water which, during manufacturing or Cat- RQ in pounds processing, comes into direct contact Material egory (kilograms) with or results from the production or use of any raw material, intermediate Ammonium benzoate ...................... D ...... 5,000 (2,270) Ammonium bicarbonate .................. D ...... 5,000 (2,270) product, finished product, byproduct, Ammonium bichromate ................... A ....... 10 (4.54) or waste product. Ammonium bifluoride ...................... B ....... 100 (45.4) Ammonium bisulfite ......................... D ...... 5,000 (2,270) [44 FR 50776, Aug. 29, 1979, as amended at 58 Ammonium carbamate .................... D ...... 5,000 (2,270) FR 45039, Aug. 25, 1993; 65 FR 30904, May 15, Ammonium carbonate ..................... D ...... 5,000 (2,270) 2000; 80 FR 37112, June 29, 2015; 83 FR 5208, Ammonium chloride ........................ D ...... 5,000 (2,270) Feb. 6, 2018] Ammonium chromate ...................... A ....... 10 (4.54) Ammonium citrate dibasic ............... D ...... 5,000 (2,270) Ammonium fluoborate ..................... D ...... 5,000 (2,270) § 117.2 Abbreviations. Ammonium fluoride ......................... B ....... 100 (45.4) NPDES equals National Pollutant Ammonium hydroxide ..................... C
    [Show full text]
  • Thermodynamic Properties of Mixtures of Aqueous Solutions of Hydrochloric Acid and Cadmium Chloride, Copper Chloride, Manganese Chloride, and Zinc Chloride
    Western Michigan University ScholarWorks at WMU Master's Theses Graduate College 12-1993 Thermodynamic Properties of Mixtures of Aqueous Solutions of Hydrochloric Acid and Cadmium Chloride, Copper Chloride, Manganese Chloride, and Zinc Chloride Samia A. Kosa Follow this and additional works at: https://scholarworks.wmich.edu/masters_theses Part of the Chemistry Commons Recommended Citation Kosa, Samia A., "Thermodynamic Properties of Mixtures of Aqueous Solutions of Hydrochloric Acid and Cadmium Chloride, Copper Chloride, Manganese Chloride, and Zinc Chloride" (1993). Master's Theses. 4363. https://scholarworks.wmich.edu/masters_theses/4363 This Masters Thesis-Open Access is brought to you for free and open access by the Graduate College at ScholarWorks at WMU. It has been accepted for inclusion in Master's Theses by an authorized administrator of ScholarWorks at WMU. For more information, please contact [email protected]. THERMODYNAMIC PROPERTIES OF MIXTURES OF AQUEOUS SOLUTIONS OF HYDROCHLORIC ACID AND CADMIUM CHLORIDE, COPPER CHLORIDE, MANGANESE CHLORIDE, AND ZINC CHLORIDE by Samia A. Kosa A Thesis Submitted to the Faculty of The Graduate College in partial fulfillment of the requirements for the Degree of Master of Arts Department of Chemistry Western Michigan University Kalamazoo, Michigan December 1993 ACKNOWLEDGEMENTS I wish to express my deep gratitude and sincere appreciation to my committee advisor, Dr. Donald Schriber, for his continual guidance, direction, and assistance in this research. I would also like to acknowledge the help of the other committee members, Dr. Thomass Houser and Dr. Ralph Steinhaus, towards this work. My family continuously provided me support and encouragement and to them I owe more than I can say.
    [Show full text]
  • Download Author Version (PDF)
    Journal of Materials Chemistry A Accepted Manuscript This is an Accepted Manuscript, which has been through the Royal Society of Chemistry peer review process and has been accepted for publication. Accepted Manuscripts are published online shortly after acceptance, before technical editing, formatting and proof reading. Using this free service, authors can make their results available to the community, in citable form, before we publish the edited article. We will replace this Accepted Manuscript with the edited and formatted Advance Article as soon as it is available. You can find more information about Accepted Manuscripts in the Information for Authors. Please note that technical editing may introduce minor changes to the text and/or graphics, which may alter content. The journal’s standard Terms & Conditions and the Ethical guidelines still apply. In no event shall the Royal Society of Chemistry be held responsible for any errors or omissions in this Accepted Manuscript or any consequences arising from the use of any information it contains. www.rsc.org/materialsA Page 1 of 9 Journal of Materials Chemistry A ARTICLE JMCA Safer Salts for CdTe Nanocrystal Solution Processed Solar Cells: The Dual Roles of Ligand Exchange and Grain Growth Received 00th January 20xx, a b c d e Accepted 00th January 20xx Troy K. Townsend, † William B. Heuer, Edward E. Foos, Eric Kowalski, Woojun Yoon and Joseph G. Tischler e DOI: 10.1039/x0xx00000x Inorganic CdSe/CdTe nanocrystals for solid-state photovoltaic devices are typically sintered into a bulk-like material after www.rsc.org/ annealing in the presence of solid cadmium chloride.
    [Show full text]
  • United States Patent Office
    United States Patent Office 3,330,620 Patented July 11, 1967 2 3,330,620 aqueous solution is used and this base is selected from METHOD FOR OXEDZNG AMMONUMSULFTE TO AMMONUMSULFATE the group consisting of pyridine, picolines, lutidines, col Angel Vian-Ortino and Vicente Martin-Municio, Madrid, lidines, quinoline, pyridic coal-tar bases, pyridic bases Spain, assignors to Empresa Auxiliar de la Industria, derived from petro-chemical processes, bases containing S.A., Madrid, Spain 5 pyridinic condensed rings and derivatives thereof. No Drawing. Fied Apr. 22, 1963, Ser. No. 274,806 The method of the present invention of converting am Claims priority, application Spain, Apr. 23, 1962, monium sulfite into ammonium sulfate may also be car 276,718 ried out by forming a dispersion of an organic, nitro 15 Claims. (C. 23-119) gen-containing base in an aqueous solution of ammonium 10 sulfate and ammonium sulfite, the organic base being in The present invention relates to a process for the soluble in the aqueous solution and being present in an quantitative oxidation of ammonium sulfite and, more amount equal to between 10% and 80% of the volume particularly, for the oxidation of ammonium sulfite which of the dispersion, passing air through the dispersion while has been formed by absorption of sulfur dioxide in aque the same is maintained at an elevated temperature of be ous ammonia solutions. Thus, the present invention is also 5 tween 40 and 140 C. and at an absolute pressure of be concerned with the recovery of sulfur dioxide from waste tween 1 and 11 atmospheres so as to substantially com gases in the form of ammonium sulfate.
    [Show full text]
  • Particularly Hazardous Substances
    Particularly Hazardous Substances In its Laboratory Standard, OSHA requires the establishment of additional protections for persons working with "Particularly Hazardous Substances" (PHS). OSHA defines these materials as "select" carcinogens, reproductive toxins and acutely toxic materials. Should you wish to add: explosive, violently reactive, pyrophoric and water-reactve materials to this category, the information is included. Carbon nanotubes have also been added due to their suspected carcinogenic properties. This table is designed to assist the laboratory in the identification of PHS, although it is not definitively conclusive or entirely comprehensive. *Notes on the proper use of this table appear on page 12. 1 6 5 2 3 4 Substance CAS National Toxicity National Program Carcinogen Toxin Acute Regulated OSHA Carcinogen Group IARC Carcinogen Toxin Reproductive Violently Reactive/ Explosive/Peroxide Forming/Pyrophoric A-a-C(2-Amino-9H-pyrido[2,3,b]indole) 2648-68-5 2B Acetal 105-57-7 yes Acetaldehyde 75-07-0 NTP AT 2B Acrolein (2-Propenal) 107-02-8 AT Acetamide 126850-14-4 2B 2-Acetylaminofluorene 53-96-3 NTP ORC Acrylamide 79-06-6 NTP 2B Acrylyl Chloride 814-68-6 AT Acrylonitrile 107-13-1 NTP ORC 2B Adriamycin 23214-92-8 NTP 2A Aflatoxins 1402-68-2 NTP 1 Allylamine 107-11-9 AT Alkylaluminums varies AT Allyl Chloride 107-05-1 AT ortho-Aminoazotoluene 97-56-3 NTP 2B para-aminoazobenzene 60-09-3 2B 4-Aminobiphenyl 92-67-1 NTP ORC 1 1-Amino-2-Methylanthraquinone 82-28-0 NTP (2-Amino-6-methyldipyrido[1,2-a:3’,2’-d]imidazole) 67730-11-4 2B
    [Show full text]
  • The Effect of Sargassum Angustifolium Ethanol Extract on Cadmium Chloride-Induced Hypertension in Rat
    Research Journal of Pharmacognosy (RJP) 8(1), 2021: 81-89 Received: 31 Oct 2020 Accepted: 17 Dec 2020 Published online: 19 Dec 2020 DOI: 10.22127/RJP.2020.255203.1637 Original article The Effect of Sargassum angustifolium Ethanol Extract on Cadmium Chloride-Induced Hypertension in Rat Leila Safaeian1* , Afsaneh Yegdaneh2, Masoud Mobasherian1 1Department of Pharmacology and Toxicology, Isfahan Pharmaceutical Sciences Research Center, School of Pharmacy and Pharmaceutical Sciences, Isfahan University of Medical Sciences, Isfahan, Iran. 2Department of Pharmacognosy, School of Pharmacy and Pharmaceutical Sciences, Isfahan University of Medical Sciences, Isfahan, Iran. Abstract Background and objectives: Sargassum angustifolium is a brown alga in southwestern coastline of Persian Gulf. Regarding the presence of various bioactive compounds and evidence of antihypertensive effects in other species of Sargassum, we evaluated the effect of S. angustifolium ethanol extract in CdCl2-induced hypertension in Wistar rats. Methods: Alga extract was prepared by maceration method using 70% ethanol and assessed for total phenolics and salt content. CdCl2 (1.5 mg/kg/day) was administered intraperitoneally to the rats for two weeks. Treatment groups received S. angustifolium extract (20, 40 and 80 mg/kg) or nifedipine (10 mg/kg) orally and simultaneously were given CdCl2 for two weeks. Systolic blood pressure (SBP) and heart rate were measured using tail-cuff method. Total antioxidant capacity, urea, creatinine, electrolytes including sodium, potassium, calcium and chloride were estimated in blood samples. The weight and histopathology of kidney tissues were also evaluated. Results: The content of total phenolic as gallic acid equivalent and the salt as NaCl was 67.42 ± 9.5 mg/g and 6.9 g/100 g in dried ethanol extract, respectively.
    [Show full text]
  • Effects of Post-Manufacture Board Treatments on Formaldegyde Emission
    Effects of post-manufacture board treatments on formaldehyde emission: a literature review (1960-1984) George E. Myers treatments. At present I suggest that impregnation of Abstract boards with aqueous solutions (Method 1) is likely to be This paper reviews the literature dealing with the the most reliable because it should permit the use of a many post-manufacture board treatments used to re­ large scavenger excess and also allow neutralization of duce formaldehyde emission from urea-formaldehyde board acidity to reduce resin hydrolysis. bonded boards. Such treatments have almost solely used one or more of five chemical or physical principles: 1) formaldehyde reaction with NH3, 2) formaldehyde reaction with oxygenated sulfur compounds, 3) formal­ This is the fifth in a planned series of six critical dehyde reaction with organic -NH functionality, 4) pH reviews of the literature on different aspects of the adjustment, and 5) physical barrier. I have categorized problem of formaldehyde emission from adhesively the available reports according to four primary board bonded wood products. The series was initiated at the treatment methods that use the five principles in differ­ Forest Products Laboratory, Madison, Wis., in response ent ways. The four primary treatment methods are: to a need expressed by industry representatives for an 1. Application of scavengers as solids or aqueous independent evaluation and summation of data from solutions. Ammonium bicarbonate and carbonate have diverse sources. The six aspects being reviewed concern been used as solid powders, while the solutions involved the effects of formaldehyde-to-urea mole ratio (F/U) a variety of ammonium salts, ammonium and alkali (48), ventilation rate and loading (49), temperature and metal salts with sulfur-containing anions, and urea and humidity (51), separate additions to wood furnish or other compounds having -NH functionality; veneer (52), post-manufacture treatments of boards, 2.
    [Show full text]