Mobile Cradles and Hydraulic Lift Trailers
10 Ton Lift Trailer - New 2019 Modell All our Products are designed and tested in house, and they have the CE-marking. Manufactured and hot-dip galvanized in Denmark 8 Ton Lift Trailer with hydraulic change of width to fit 3 Ton Cradle Hydraulic Lift Trailers 10, 20, 25 or 30 Ton Do you need more Lifting capacity? Contact us, and we will be happy to provide a quote for a solution exactly to your 30 Ton Hydraulic Lift Trailer needs.
LP Yacht ApS LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk HYDRAULIC LIFT TRAILERS
Hydraulic Lift Trailer - 10 Ton
Small, quick and efficient, but still powerful and stable. Easy and safe handling of sail- and motorboats up to 10 tons. The small lift trailer handles sail- and motorboats up to 10 tons - safely and quickly.
Only 2,65 meter wide the trailer allows for close parking of the boats, thus optimizing the use of storage space.
With build in “Power Pack” the trailer is fully independent of the towing vehicle. The two rear wheels moves by hydraulics and the towing vehicle lifts the frontend. Tow and lift must be provided by a forklift, a tele loader or similar, with a lifting capacity of 2,5 - 4 Tons.
The standard setup for the 10-Ton trailer is 1 x 140 Amp battery, charger and a remote-control allowing operation of the trailer from the towing vehicle.
The LPY 10-Ton trailer carries cradles up to 4 meters in length.
The trailer is designed, produced and hot-dip galvanized in Denmark.
10 Ton hydraulich Lift Trailer – New model 2019 The Remote Control
Very compact construction – all cables and hydraulic hoses The Operation panel are internally protected
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk HYDRAULIC LIFT TRAILERS
Hydralic Lift Trailer – up to 30 Ton
A very stable and powerful trailer. Easy and safe boat handling – 20 to 60 feet in lengths and up to 30 tons. The lift trailer handles sail- and motor yachts up to 20, 25 or 30 tons - safely and quickly.
The built in “Power Pack” driving the hydraulic lift makes the trailer completely independent of the towing vehicle. You can use a tractor, a forklift, a truck, a tele handler or a loader to tow the trailer.
The standard set up has 2 x 140 Amp batteries, charger, and a remote control allowing operation of the trailer from the towing vehicle.
For boats up to 8 - 9 tons the trailer can be employed with only 4 wheels fitted. Additional wheels, for a 6 or 8 wheel configuration can easily be attached in only a few minutes. The lift moves vertically up and down, and the trailer carries cradles of 5 meters in length.
The trailer is designed, produced and hot-dip galvanised in Denmark.
25 Ton hydraulic Lift Trailer The Hydraulic system
20 Ton hydraulic Lift Trailer The Remote Control
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk M O B I L E CRADLES
Mobile Cradle – Type 3 Tons
Weight and measurements:
Length: 2500 mm Width: 1600 mm Height of corner posts: 850 mm (Variable 850 mm to 1400 mm)
Several possibilities for a flexible fit to different boat types. Installing the “Motorboat beam” you can choose 3 different levels for keel support. For planning boats (like Bayliner, Sea Ray and similar types) 2 beams are required.
Maximum boat length in a 3T cradle: Up to 8 meters Maximum weight of boat: 3 Tons Approximate weight of the cradle: 220 kilograms, included spindles and support plates
Maximum storage: Up to 15 cradles can be stacked Space requirements for a stack of 15: 7 Square meters (0,47 Square meters per cradle)
Warranty
Steel items produced in house: 10 Years Other components: 5 Years
Product data:
Dimension of steel profiles: UNP 120 mm and 38 mm top spindles. CE-marked Steel production according to: EN 1090 og ISO 3834 Hot-dip galvanizing according to: DS/EN-150-1461-2009 Service life of the cradle in a category C4 Marina: typically 13 to 26 years.
Possible options for the 3 T cradle:
o Additional support posts o Motorboat beams o Angled support plates o Plate with your logo o Bow / Stern posts
3 Ton Cradle with Additional support posts 3 Ton Cradle with Additional support posts and Motorboat beams
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk M O B I L E CRADLES
Mobile Cradle – Type 6 Tons
Weight and measurements:
Length: 3000 mm (Also available as 3500 og 4000 mm) Width: 2000 mm
Heigh of corner posts:
900 mm: Motorboat, no keel and motorsailer – draft up to 1,3 meters 1200 mm: Sailboat and motorsailer – draft 1,3 - 1,7 meters 1500 mm: Sailbots and motorsailer – draft 1,7 - 1,9 meters
For planning motorboats (Bayliner, SeaRay and similar) 2 additional “Motorboat keel supports” are needed.
Maximum boat length in a 6T cradle: 7 meters up to 10,5 meters Maximum weight of boat: 6 Tons Approximate weight af the cradle: 370 kilograms, including spindles and support plates
Maximum storage: Up to 15 cradles can be stacked Space requirements for a stack of 15: 10,3 square meters (0,69 Square meters per cradle)
Warranty
Steel items produced in house: 10 Years Other components: 5 Years
Product data:
Dimension of steel profiles: UNP 160 mm and 38 mm top spindles. CE-marked Steel production according to: EN 1090 og ISO 3834 Hot-dip galvanizing according to: DS/EN-150-1461-2009 Service life of the cradle in a category C4 Marina: typically 13 to 26 years.
Possible options for the 6 T cradle:
o Additional support posts o Motorboat keel supports o Angled support plates o Plate with your logo o Safety chains o Bow / Stern posts 6 Ton cradle (1200 mm) 6 Ton cradle with 2 motorboat keel supports (900 mm)
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk MOBIL E C R A D L E S
Mobile Cradle - Type 12 Ton
Weight and measurements
Length: 4000 mm (Also available as 5000 mm) Width: 2000 mm
Hight of corner posts:
900 mm: Motorboat, no keel and motorsailer – draft up to 1,4 meters 1200 mm: Sailboat and motorsailer – draft 1,4 - 1,8 meters 1500 mm: Sailbots and motorsailer – draft 1,8 – 2,1 meters 1800 mm: Sailbots and motorsailer – draft 2,1 – 2,4 meters
For planning motorboats (Bayliner, SeaRay and similar) 2 additional “Motorboat keel supports” are needed.
Maximum boat length in a 12T cradle: 9 meters up to 13 meters Maximum weight of boat: 12 Tons Approximate weight af the cradle: 495 kilograms, including spindles and support plates
Maximum storage: Up to 15 cradles can be stacked Space requirements for a stack of 15: 13,2 squaremeters (0,88 Square meters per cradle)
Warranty
Steel items produced in house: 10 Years Other components: 5 Years
Product data:
Dimension of steel profiles: UNP 200 mm and 38 mm top spindles. CE-marked Steel production according to: EN 1090 og ISO 3834 Hot-dip galvanizing according to: DS/EN-150-1461-2009 Service life of the cradle in a category C4 Marina: typically 13 to 26 years.
Possible options for the 6 T cradle:
o Additional support posts o Motorboat keel supports o Angled support plates o Plate with your logo o Safety chains o Bow / Stern posts
12 Ton cradle with additional posts (1200 mm) 12 Ton cradle with additional posts (900 mm)
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk M O B I L E CRADLES
Mobile Cradle - Type 18 Ton
Weight and measurements:
Length: 4000 mm (Also available as 5000 mm) Width: 2000 mm
Height of corner posts:
900 mm: Motorboat, no keel and motorsailer – draft up to 1,4 meters 1200 mm: Sailboat and motorsailer – draft 1,4 - 1,9 meters 1500 mm: Sailbots and motorsailer – draft 1,9 – 2,3 meters 1800 mm: Sailbots and motorsailer – draft 2,1 – 2,5 meters
For planning motorboats (Bayliner, SeaRay and similar) 2-3 additional “Motorboat keel supports” are needed.
Maximum boat length in a 18T cradle: 12 meters up to 15 meters Maximum weight of boat: 18 Tons Approximate weight of the cradle: 736 kilograms, including spindles and support plates
Maximum storage: Up to 15 cradles can be stacked Space requirements for a stack of 15: 13,5 square meters (0,90 Square meters per cradle)
Warranty
Steel items produced in house: 10 Years Other components: 5 Years
Product data:
Dimension of steel profiles: UNP 240 mm and 38 mm top spindles. CE-marked Steel production according to: EN 1090 og ISO 3834 Hot-dip galvanizing according to: DS/EN-150-1461-2009 Service life of the cradle in a category C4 Marina: typically 13 to 26 years.
Possible options for the 18 T cradle:
o Additional support posts o Motorboat keel supports o Angled support plates o Plate with your logo o Safety chains o Bow / Stern posts 18 Ton med ekstra ben og kædesikring (1500 mm) 18 Ton med ekstra ben og kædesikring (1500 mm)
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk M O B I L E CRADLES
Flex-Cradle - Type 8 Tons with angled supports
Weight and measurements
Length: 3000 mm (also available 3500 mm) Width: 2000 mm Height of corner posts: 900 mm (Variable from 900 mm to 1600 mm) Angles of corner posts: Adjustable in 4 different angled positions
Recommended max. length of boat: From 7 to 11 meters Maximum weight of boat: 8 Tons Approximate weight of the cradle: 483 kilograms including spindles and support plates
Maximum storage: Up to 15 cradles can be stacked Space requirements for a stack of 15: 11,2 square meters (0,75 square meters per cradle)
Warranty
Steel items produced in house: 10 Years Other components: 5 Years
Product data:
Dimension of steel profiles: UNP 160 mm and 38 mm top spindles. CE-marked Steel production according to: EN 1090 og ISO 3834 Hot-dip galvanizing according to: DS/EN-150-1461-2009 Service life of the cradle in a category C4 Marina: typically 13 to 26 years.
Possible options for the 8 T flex-cradle:
o Motorboat beams o Extra long inserts for boats with large draft o Additional support posts o Plate with your logo
8 Ton Flexible Cradle 8 Ton Flexible Cradle
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk MOBILE CRADLES
Flex-Cradle – Type 14 Tons with angled supports
Weight and measurements:
Length: 4000 mm (also available as 4500 mm) Width: 2000 mm Height of corner posts: 900 mm (Variable from 900 mm to 1800 mm) Angles of corner posts: Adjustable in 4 different angled positions
Recommended max length of boat: 9 to 14 meters Maximum weight of boat: 14 Tons Approximate weight of the cradle: 600 kilograms including spindles and support plates
Maximum storage: Up to 15 cradles can be stacked Space requirements for a stack of 15: 13,5 square meters (0,9 square meters per cradle)
Warranty
Steel items produced in house: 10 Years Other components: 5 Years
Product data:
Dimension of steel profiles: UNP 160 mm and 38 mm top spindles. CE-marked Steel production according to: EN 1090 og ISO 3834 Hot-dip galvanizing according to: DS/EN-150-1461-2009 Service life of the cradle in a category C4 Marina: typically 13 to 26 years.
Possible options for the 8 T flex-cradle:
o Motorboat beams o Extra long inserts for boats with large draft o Additional support posts o Plate with your logo
14 Tons flexible cradle with motorboat 14 Tons flexible cradle with motorboat beams beams
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk MOBILE MARINA SHED
Mobile Marina Shed
The shed is available as a steel construction for “do it yourself” builders - or as a “key ready” complete built to your specifications.
”Equipment shed” - Korsør Marina
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk MOBILE CRADLES - OPTIONS
Additional Support Posts
3 Tons
Additional support posts on a 3 Tons cradle
Only one size available
6 Tons
Additional support posts on a 6 Ton cradle (900 mm)
3 sizes available for post heights 900, 1200 and 1500 mm
12 Tons
Additional support posts on a 12 Ton cradle (900 mm) 4 sizes available for post heights 900, 1200, 1500 and 1800 mm
Additional support posts for 12 Ton and for 18 Ton cradles are interchangeable - same dimensions
18 Tons
Additional support posts on an 18 Ton cradle - post height 1500 mm 4 sizes available for post heights 900, 1200, 1500 and 1800 mm
Additional support posts for 12 Ton and for 18 Ton cradles are interchangeable - same dimensions
For sailboats stored with the mast standing, LP Yacht always recommend additional posts fitted to provide a wider support.
For vessels with a large beam fitting additional posts should always be considered.
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk MOBILE CRADLES - OPTIONS
Angled Adapter for Spindles
3 Tons & 6 Tons Spindle in angled adapter on a 6 tons cradle The same adapter fits on both 3 Tons and 6 Tons cradles
12 Ton & 18 Ton Spindle in angled adapter on an 18 tons cradle The same adapter fits on both 12 Tons and 18 Tons cradles
Spindles
3, 6, 12 & 18 Tons
All cradles are provided with same type of spindles fitted with metal frames and neoprene pads
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk MOBILE CRADLES - OPTIONS
Keel Supports and Beams – for motorboats
Motorboat beams - 3 Tons
3 Tons cradle with motorboat beams
Height adjustable in 3 positions
Motorboat beams - 8 Tons & 14 Tons
8 Tons cradle with motorboat beams
Motorboat keel support – 6, 12 & 18 Tons 6 and 12 Tons cradles with motorboat keel supports
The same Keel Supports fits in all 6, 12 and 18 tons cradles
Position in length of the cradle is free to best match the boat
The Motorboat Keel Supports are available in 2 heights High: 60 centimeters (Height 45 centimeters over the keel frame) Low: 40 centimeters (Height 25 cm over the keel frame)
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk MOBILE CRADLES - OPTIONS
Safety Chains
6, 12 & 18 Tons
For even better stability LP Yacht recommend that safety chains are fitted when larger yachts and boats
with large draft are stored in 6, 12 and 18 Tons cradles
For sailing yachts stored with the mast standing: A set of safety chains should
always be fitted
Bow / Stern posts 3, 6, 12 & 18 Tons
Bow / Stern posts can be used with any of our mobile cradles
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk MOBILE CRADLES - OPTIONS
Your logo
3, 6, 12 & 18 Tons
All our cradles are prepared for fitting a laser cut plate with your logo
The plates are secured with safety bolts
Cradle lift tool
The cradle lift tool is employed if the forklift does not have sideways moving forks
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk L I S T OF REFERENCES
Marinas and Yacht Clubs with LPY Lift Trailers and Cradles:
Kastrup Havn (10 and 30 Tons) Bønnerup Havn (30 Tons) Vestre Bådelaug og Sejlklubben Limfjorden (20 Tons) Fåborg Havn (30 Tons) Dragør Havn (10 and 30 Tons) Ringkøbing Havn (10 Tons) Korsør Lystbådehavn (20 Tons) Sæby Lystbådehavn (30 Tons) Morsø Sejlklub, Nykøbing Mors (20 Tons) Køge Marina (8 and 25 Tons) Nyborg Marina (20 Tons) Bork Havn, Ringkøbing Fjord (10 Tons) Kaløvig Lystbådehavn (10 and 25 Tons) Ebeltoft Skudehavn (20 Tons) Assens Marina, Fyn (30 Tons) Vejle Lystbådehavn (12 Tons) Holstebro-Struer Lystbådehavn (20 Tons) Virksund Lystbådehavn (12 Tons) Askøy Marina, Bergen, Norge (20 Tons) Stavanger Seilforening, Norge (20 Tons) Egå Marina (8 and 25 Tons) Greve Marina, Hejren (25 Tons) Vallensbæk Havn (10 and 30 Tons) Aalborg Sejlklub (8 and 25 Tons) Flensborg Yacht Club (10 Tons) Hovde Maritim, Norge (25 Tons) Ålesund Marina, Norge (20 Tons)
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk LIST OF REFERENCES
Marinas and Yacht Clubs with LPY Cradles:
Grenå Marina Nivå Havn Lundsvågen Båtforening, Hundsvåg, Norge Åmøy Marina, Vestre Åmøy, Norge Bogense Marina, Fyn Aarhus Sejlklub Aarhus Motorbådsklub Sejlklubben Bugten, Aarhus Marselisborg Havn Seilforeningen af 1928, Stavanger, Norge
Boat Yards, Brokers and Retailers with LPY Lift Trailers and Cradles:
FloorYachts, Randers (20 Tons) Båtspecialisten, Kristiansand, Norge (10 Tons) Tempo Marineservice (20 Tons) Kiil Skagen ApS (20 Tons) Odsherred Marineservice (30 Tons) Skovhoved Yachtværft (10 Tons) Hundested Bådebyggeri (25 Tons) Dansk Marine Center, Risskov (14 Tons) Risbjerg Marine, Silkeborg (20 Tons) Gran Seil, Vettre, Norge (14 Tons) Dragør Bådeværft (14 Tons) AziYachts, Middelfart (20 Tons) Lundal Yacht Service (14 Tons) Sejlerbixen, Struer (14 Tons)
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk LIST OF REFERENCES
Boat Yards, Brokers and Retailers with LPY Cradles:
Virgin Gorda Yacht Harbour, De Britiske Jomfruøer Asker Marina, Norge Normar Yachts, Son, Norge Tempo Bådsalg, Ishøj Havn Værftet, Skive HP Marine, Moss, Norge Lunde Båt, Vettre, Norge Horsens Yachtværft X-Yachts
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk L P Y a c h t
With a custom solution from LP Yacht all of this is included: o 40 Years of experience with boat cradles - more than 30 years with mobile systems. o An all Danish product produced in Denmark - including subcontractors. o The Danish Hot-Dip Galvanizing is in accordance with standard: DS/EN- 150-1461-2009. o Steel produced in accordance with standard: EN 1090 and ISO 3834. o CE marking. o A full-scale product program to match every type of boat and boat size. o All steel parts are certified to warrant quality and durability, not least of importance for the quality of the galvanizing, its thickness and service life. o 10 years warranty on all steel parts produced locally by LP Yacht. o 5 years warranty on other components. o An adequate product liability insurance. o By November 2019 LP Yacht has produced and delivered more than 9000 mobile cradles - No incident relating to breaks or deformations has been reported. o Cooperation with leading insurance companies in the marine sector. o Continuous development of new products always tested in house in our day to day operation of marina and storage facilities. o Always up to date with new boat types and changes of importance to the cradles and lift trailers. o Help and support to your operation relating to choice of cradles and options. o Robust steel spindles are standard for all cradle models - same type, so no risk to use wrong dimension. o Neoprene padding on all spindles for every size of cradle. o Production capacity of more than 50 cradles per week ensures a quick response to your demands.
With LP Yacht you get a strong partner in handling and storage of boats and yachts
LP Yacht ApS Vester Fjordvej 5-7, 9280 Storvorde | +45 96 77 60 00 | www.lp-yacht.dk