Survey Report on Cargo Gear

Total Page：16

File Type：pdf, Size：1020Kb

SURVEY REPORT ON CARGO GEAR Type: Initial Annual Occasional Name of Ship I.M.O No. Flag Call Sign Class Number G.R.T Type of Ship Hull Material Survey Items Exa. Meas. Test Remarks Derricks and Union Purchase Masts and derrick posts Cross trees Derrick boom Marking booms Built-in sheave Boom head guy (schooner guy) Derrick gooseneck fitting Derrick heel assembly Span (topping) rope Rope sockets Thimbles Derrick span cargo block Boom eye for span ropes Mast head span block Mast head span eye fitting Derrick heel span lead block Shackles Rings Rigging screws Delta (triangular) plate Span chain Connection to deck plate (shackle) Deck plate Topping winch Cargo runner Cargo runner guide Rope sockets Thimbles Boom eye for cargo runner Derrick head cargo block Mast head cargo runner lead block Lower cargo purchase block Derrick heel cargo runner lead block Swivel Cargo hook Shackles GUARDIAN BUREAU OF SHIPPING LLC PAGE 1 OF 3 FORM 9010/SRCG/GBS/DEL/99 Rings Rigging screws Cargo winch Slewing guy pendants (rope) Derrick slewing guy tackle rope Rope sockets Thimbles Slewing guy tackle Upper slewing guy block Lower slewing guy block (or lead blocks) Shackles Rings Rigging screws Slewing guy deck eye plate Slewing winch Preventer safety catch Preventer guy (stay ropes) Rope sockets Thimbles Preventer guy chain Preventer guy eye plate Shackles Rings Rigging screws Preventer guy winch Cranes Mast Jib-boom Crane frame Crane substructures Roof crane Jib heel pins Slewing rings for cranes Blocks Ropes Shackles Rings Hooks Rope drums Cargo lifts and ramps Wire ropes Sprockets Chains Sheaves Shackles Operating locks (safety guards) Guide rollers Axle pins Slewing bearings Main pivots GUARDIAN BUREAU OF SHIPPING LLC PAGE 2 OF 3 FORM 9010/SRCG/GBS/DEL/99 Rope drums Hydraulic cylinders Winches Passenger lifts Wire ropes Chains Sheaves Sprockets Guide rollers Axle pins Bearings Lift trunk Landing doors Guides Over-running devices and brakes Safety gear Safety equipment (hatches, ladders etc.) Hydraulic cylinders Winches Annual survey have been carried out/not been carried out on the parts which can be dismantled by owners. Load tests of Derricks and Cranes. No. of Derricks or Cranes 1 2 3 4 5 6 7 8 9 10 Proof load applied Safe working load Union Proof load applied Purchase Safe working load Repairs and replacements carried out during the survey. REMARKS: Changes and additional information to the Register. Place: Date: The Surveyor: Signature: GUARDIAN BUREAU OF SHIPPING LLC PAGE 3 OF 3 FORM 9010/SRCG/GBS/DEL/99 .

Copy Link

Recommended publications

“Bicentennial Speeches (2)” of the Ron Nessen Papers at the Gerald R
The original documents are located in Box 2, folder “Bicentennial Speeches (2)” of the Ron Nessen Papers at the Gerald R. Ford Presidential Library. Copyright Notice The copyright law of the United States (Title 17, United States Code) governs the making of photocopies or other reproductions of copyrighted material. Ron Nessen donated to the United States of America his copyrights in all of his unpublished writings in National Archives collections. Works prepared by U.S. Government employees as part of their official duties are in the public domain. The copyrights to materials written by other individuals or organizations are presumed to remain with them. If you think any of the information displayed in the PDF is subject to a valid copyright claim, please contact the Gerald R. Ford Presidential Library. Digitized from Box 2 of The Ron Nessen Papers at the Gerald R. Ford Presidential Library THE WHITE HOUSE WASHINGTON June 28, 1976 MEMORANDUM FOR ROBERT ORBEN VIA: GWEN ANDERSON FROM: CHARLES MC CALL SUBJECT: PRE-ADVANCE REPORT ON THE PRESIDENT'S ADDRESS AT THE NATIONAL ARCHIVES Attached is some background information regarding the speech the President will make on July 2, 1976 at the National Archives. ***************************************************************** TAB A The Event and the Site TAB B Statement by President Truman dedicating the Shrine for the Delcaration, Constitution, and Bill of Rights, December 15, 1952. r' / ' ' ' • THE WHITE HOUSE WASHINGTON June 28, 1976 MEMORANDUM FOR BOB ORBEN VIA: GWEN ANDERSON FROM: CHARLES MC CALL SUBJECT: NATIONAL ARCHIVES ADDENDUM Since the pre-advance visit to the National Archives, the arrangements have been changed so that the principal speakers will make their addresses inside the building .
[Show full text]
Occupational Safety
OCCUPATIONAL SAFETY AND HEALTH STANDARDS PART 7 Longshoring HAWAII ADMINISTRATIVE RULES TITLE 12 DEPARTMENT OF LABOR AND INDUSTRIAL RELATIONS SUBTITLE 8 DIVISION OF OCCUPATIONAL SAFETY AND HEALTH PART 7 OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR LONGSHORING Chapter 12-190 Longshoring This unofficial copy varies from the administrative rules format in that all sections follow directly after the previous section; small letters designating subsections are in bold type; page numbers have been added to the bottom center of each page; headers do not include the section number, only the title and chapter number; and sections that incorporate federal (Department of Labor, Occupational Safety and Health Administration) standards through reference include the federal standard. These variations facilitate changes to and use of the HIOSH rules and standards. This is an official copy in all other respects. HAWAII ADMINISTRATIVE RULES §12-190 TITLE 12 DEPARTMENT OF LABOR AND INDUSTRIAL RELATIONS SUBTITLE 8 DIVISION OF OCCUPATIONAL SAFETY AND HEALTH PART 7 SAFETY AND HEALTH REGULATIONS FOR LONGSHORING CHAPTER 190 LONGSHORING §12-190-1 Incorporation of federal standard §12-190-1 Incorporation of federal standard. Title 29, Code of Federal Regulations. Part 1918 entitled “Safety and Health Regulations for Longshoring”, published by the Office of the Federal Register, National Archives and Records Administration, on July 9, 1974; and the amendments published on July 22, 1977; August 24, 1987; February 9, 1994; July 19, 1994; December 22, 1994; February 13, 1996; July 25, 1997; December 1, 1998; August 27, 1999; November 12, 1999; June 30, 2000; and February 28, 2006, are made part of this chapter.
[Show full text]
New Accessory Line up for Warn Winches and Warn Ploughs
New Accessory Line up for Warn winches and Warn ploughs With the introduction of the Vantage and Provantage winches the line up of accessories were updated as well. These new accessories will make winching more easy and gives you a better handling while using the plough as well www.yamaha-motor.eu Propivot plough Rotates plough blade up to 28 degrees at the push of a button- even under load . P/N YME887000000 •Equipped with a powerful motor •designed using a durable split-ring gear train, ProPivot will make quick work of all ploughing activities. •Improved sealing along with a shock absorbing dampener system makes the ProPivot a must-have when you need superior response and versatile plough performance. Note; Propivot can not be lifted with Provantage plough lift (YMD846000000) Propivot system can only be lifted with winch. Supersession of the “old” power pivot YMD793600000 Neoprene Winch Cover Protects the winch from water and freezing P/N YME719800000 •Made of durable, tight-fitting neoprene that resists water and cracking Fit on; Vantage 3000 Pro-vantage 2500 and 3500 www.yamaha-motor.eu Wireless control kit Control your winch from anywhere within a 15 metre range of your vehicle. P/N YME902880000 • Let’s you operate your winch from anywhere within a 15 metre radius. • Two-colour LED provides instant feedback during the winching process. • System shuts off automatically after three minutes (or it can be turned off manually) to conserve battery life. The WARN® Wireless Control System will work with WARN 1.5ci, 2.5ci,3.0ci, RT/XT, Vantage and ProVantage winches Supersession of the “old” wireless control kit YMD745000000 Plough HD mounting Upgrade mounting points which increase the durability and performance of your system P/N YME852430000 • Wear-form steel construction.
[Show full text]
Sailing Course Materials Overview
SAILING COURSE MATERIALS OVERVIEW INTRODUCTION The NCSC has an unusual ownership arrangement -- almost unique in the USA. You sail a boat jointly owned by all members of the club. The club thus has an interest in how you sail. We don't want you to crack up our boats. The club is also concerned about your safety. We have a good reputation as competent, safe sailors. We don't want you to spoil that record. Before we started this training course we had many incidents. Some examples: Ran aground in New Jersey. Stuck in the mud. Another grounding; broke the tiller. Two boats collided under the bridge. One demasted. Boats often stalled in foul current, and had to be towed in. Since we started the course the number of incidents has been significantly reduced. SAILING COURSE ARRANGEMENT This is only an elementary course in sailing. There is much to learn. We give you enough so that you can sail safely near New Castle. Sailing instruction is also provided during the sailing season on Saturdays and Sundays without appointment and in the week by appointment. This instruction is done by skippers who have agreed to be available at these times to instruct any unkeyed member who desires instruction. CHECK-OUT PROCEDURE When you "check-out" we give you a key to the sail house, and you are then free to sail at any time. No reservation is needed. But you must know how to sail before you get that key. We start with a written examination, open book, that you take at home.
[Show full text]
C420 Parts Locator
C420 Parts Locator p: 401-237-6117 f: 401-236-1361 84 Cutler St, Unit 2 Warren, RI 02885 zimsailing.com C420 Halyard Hardware Halyard, Jib C420 (complete) 20061 -Snap shackle 10016 or Shackle, Halyard 20217 -Shroud adjuster cover 20094 -Block, 22mm, becket 20070 Halyard, Main, C420 -Ring 20106 (sold separately) Topping Lift C420 -Hook, topping lift 20060 p: 401-237-6117 f: 401-236-1361 84 Cutler St, Unit 2 Warren, RI 02885 zimsailing.com C420 Control Line Hardware Bridle, Mainsheet, C420 20105 Block, 40mm, Single 10026 (sold separately) Centerboard Control Line Block, 22mm, Single, Micro 20041 p: 401-237-6117 f: 401-236-1361 84 Cutler St, Unit 2 Warren, RI 02885 zimsailing.com 420 Boom Vangs Vang, C420 16:1 20110 Vang, 420 SCV 4:1 20292 -Block, 22mm, single, micro 20041 (x4) -Block, 22mm, fiddle w/ jam 20149 -Block, 22mm, becket 20070 -Block, 22mm, becket 20070 -Shackle, bow, 5mm 20071 (x2) -Shackle, Twist, 5mm 20267 C420 Standing Rigging Forestay, C420 20058 p: 401-237-6117 f: 401-236-1361 84 Cutler St, Unit 2 Warren, RI 02885 zimsailing.com C420 Standing Rigging (cont.) C420 Shroud Assembly -Pin, roller for spin guy 20182 -Shroud adjuster 20208 -Fast pin, 3/16”x1/2” 20068 -Shroud adjuster cover 20094 -Shroud, C420 20057 C420 Trapeze Wire Trapeze Wire (complete) 20062 -Ring, trapeze, w/ block 20066 or Ring, trapeze (no block) 20099 -Cleat, clam, trapeze 20065 -Donut handle 20064 -Shackle, standard clevis pin 20020 (sold separately) p: 401-237-6117 f: 401-236-1361 84 Cutler St, Unit 2 Warren, RI 02885 zimsailing.com C420 Main and Jib
[Show full text]
Occupational Safety and Health Admin., Labor § 1918.53
Occupational Safety and Health Admin., Labor § 1918.53 the boom independent of working guys cm) diameter wire rope shall be suffi- unless, for cast fittings, the strength of cient. the fitting exceeds the total strength (2) If the heel block is not so rigged of all lines secured to it. Any tails, fit- as to prevent its falling when not under tings, or other means of making the strain, it shall be secured to prevent al- preventers fast on the deck shall pro- ternate raising and dropping of the vide strength equal to that of the pre- block. This requirement shall not venter itself. apply when the heel block is at least 10 (2) Wire rope clips or knots shall not feet (3.05 m) above the deck when at its be used to form eyes in, nor to join sec- lowest point. tions of, preventer guys. (e) Coaming rollers. Portable coaming (b) Stoppers. (1) Chain topping lift rollers shall be secured by wire pre- stoppers shall be in good condition, venters in addition to the regular coa- equipped with fiber tails, and long ming clamps. enough to allow not fewer than three (f) Cargo hooks. Cargo hooks shall be half-hitches in the chain. as close to the junction of the falls as (2) Chain stoppers shall be shackled the assembly permits, but never far- or otherwise secured so that their links ther than two feet (.61 m) from it. Ex- are not bent by being passed around ception: This provision shall not apply fittings. The point of attachment shall when the construction of the vessel and be of sufficient strength and so placed the operation in progress are such that that the stoppers are in line with the fall angles are less than 120 degrees.
[Show full text]
List of Friendship Sloops
DEDICATION is dedicated to the town of Friendship. His dedication to the town is what brought about the sloop races. Other men had the idea but it was Herald who brought it to fruition. None of the existing organizations or committees in the town wanted to tackle such a tremendous undertaking, so almost single-handedly, Herald set up a new organization to promote this tremendous idea. Thus the Friendship Sloop Society was born. The first year was difficult. It was not easy to solicit help because people thought it couldn't be done. With great determination and dedica- tion, Herald set to work, writing letters and news releases; setting up committees and organizing work groups; arranging for parking and police DEDICATION — help — a million and one things to be done, and Herald saw to it Herald Jones — without whom this whole thing would they were done and done well. never have started. \ more appropriate word would be difficult to find! Herald Jones COVER — Without Herald it would never have begun. Friendship Sioop Society's Burgee superimposed over Without Herald it would have failed. His fore- photos taken at last year's regatta. sightedness is responsible for the most successful revival of any character boat in the world. Because of him, the Friendship Sloop today is known in CARTOONS — all corners of the world. Donna Weisel We take our hats off to you, Herald Jones, and dedicate this booklet to you. PHOTOGRAPHS — Carlton Simmons Program Printed by The Courier-Gazette, Rockland, Maine Welcome For the ninth time we welcome one and all to Friendship Sloop Friendship Sloop Society Days.
[Show full text]
Global Strategy for Asthma Management and Prevention, 2019. Available From
DISTRIBUTE OR COPY NOT DO MATERIAL- COPYRIGHTED ASTHMA MANAGEMENT AND PREVENTION GLOBAL STRATEGY FOR Updated 2019 9 Global Strategy for Asthma Management and Prevention (2019 update) DISTRIBUTE OR COPY NOT DO The reader acknowledges that this reportMATERIAL- is intended as an evidence-based asthma management strategy, for the use of health professionals and policy-makers. It is based, to the best of our knowledge, on current best evidence and medical knowledge and practice at the date of publication. When assessing and treating patients, health professionals are strongly advised to use their own professional judgment, and to take into account local or national regulations and guidelines. GINA cannot be held liable or responsible for inappropriate healthcare associated with the use of this document, including any use which is not in accordance with applicable local or national regulations or COPYRIGHTEDguidelines. This document should be cited as: Global Initiative for Asthma. Global Strategy for Asthma Management and Prevention, 2019. Available from: www.ginasthma.org 1 Table of contents Tables and figures ............................................................................................................................................................... 5 Preface ................................................................................................................................................................................. 7 Members of GINA committees (2018) ................................................................................................................................
[Show full text]
Ideal 18 Tuning Guide 1
IDEAL 18 TUNING GUIDE 1 PHOTO BY CHRIS HOWELL TABLE OF CONTENTS 3 IDEAL 18 OVERVIEW 4 HULL, RIG & SAILS 6 UPWIND SAILING It is a ¾ fractional sloop rig, with swept spreaders 7 MAIN TRIM THE IDEAL 18 KEELBOAT WAS DESIGNED and no permanent or running backstays. No hiking BY BRUCE KIRBY AS A STRICT ONE-DESIGN, straps are provided or allowed; in fact, sailors are required to keep their legs inside the boat. Because ACCESSIBLE TO SAILORS OF ALL AGES, WEIGHTS, of the no-hiking rule and the heavy keel, a larger 8 JIB TRIM range of crew weights is competitive than in most SKILL LEVELS, AND COMPETITIVE BACKGROUNDS. one-designs. In 5-15 knots, any weight combination is competitive. 10 DOWNWIND SAILING THE EMPHASIS IS ON STRATEGY, TACTICAL SKILLS, AND BOATHANDLING, RATHER THAN The keel and rudder are identical from boat to boat, with no fairing allowed. The mast step and partner TUNING, HULL FAIRING, OR SPECIAL RIGGING. locations are fixed and the headstay length is fixed 12 TRIM CHART as well. 2 3 SAILS MAINSAIL – The main is a 2 + 2 batten setup: 2 full length upper battens and 2 shorter lower battens. Full RIG battens support the sail across it, preventing flogging and The 3/4 fractional sloop rig has NO permanent or running backstays; increasing the life of the sail. Most One Design boats do not instead, rig stability is generated by 15 degree swept spreaders and a allow full battens and so their mainsail leech breaks down large cross-section mast. Rig tuning is controlled by the upper and lower much faster.
[Show full text]
Tall Ships® 101
August 10, 2005 IMMEDIATE RELEASE Contact: Sheila Gonzales (310) 732-3506 TALL SHIPS® 101 Stats and facts about the international tall ships participating in TallShips®LA, August 11-14 SAN PEDRO, Calif. – Be informed for TallShips®LA, August 11-14. With historical knowledge, vessel stats and fun facts, you will be able to recognize the tall ships, identify their key features and tout a little trivia! Fifteen international tall ships are scheduled to participate in the TallShips®LA, maritime event. Visiting ships include the Argus, Bill of Rights, Californian, Mexico’s Cuauhtémoc, Exy Johnson, Antigua’s Kaisei, Lynx, R. Tucker Thompson of New Zealand, Pilgrim, Robert C. Seamans, Royaliste, Spirit of Dana Point, Swift of Ipswich, Talofa and Tole Mour. For most people, a tall ship is a sailing vessel with three or more masts and many sails, as seen in the bygone era of the Errol Flynn movies. A tall ship, by definition, is a sailing vessel whose masts are in segments, made up of several timbers in order to give strength, and to make each mast more manageable for partial removal and repairs. The nostalgic definition is more commonly used when referring to any sailing vessel that provides sail training and participates in events such as tall ship races. For classification and race settings, the International Sail Training Association divides tall ships into three classes and several sub classes according to the vessels, sparred length and rig. A rig is the configuration, shape and number of the spars, poles, and sails. For further clarification, sailing rigs are divided into two broad categories determined by the fore and aft rig in which triangular shaped sails lie along the same direction as -more- TALL SHIPS 101 2-2-2 the ship's length, or the square rig which has squared or rectangular shaped sails attached to poles, which are perpendicular to (or go across) the vertical mast.
[Show full text]
Grade 7 Reading Practice Test
Grade 7 Reading Practice Test Nebraska Department of Education 2009 Directions: On the following pages are passages and multiple-choice questions for Grade 7 Reading Practice Test, a practice opportunity for the Nebraska State Accountability (NeSA). Each question will ask you to select an answer from among four choices. For all questions: • Read each passage. Then answer each question carefully by choosing the best answer. • Mark your answers for ALL of the questions. Remember only one of the choices provided is the correct answer. SP10R07XP01 23 STOP. READING The Bread Lesson My dad has watermelon-size biceps, a neck like an inner tube, and enormous, muscular hands that make him seem like he’s always wearing baseball mitts. He doesn’t seem like the kind of guy who would bake great bread, but he is and he does. Every Saturday he puts on his chef’s apron, rolls up his sleeves, breaks out a bag of flour, and produces two loaves of homemade bread. When he’s done, the whole house smells delicious, and I can’t wait for a hot slice smothered with yellow, melting butter. The rest of the week, Dad is a car mechanic, which involves lots of heavy lifting, tightening, unscrewing, shoving, shaking, yanking, and banging. People tend to think of their cars as metallic members of the family, so there’s lots of pressure on Dad to make sure pumps pump, steering steers, and brakes brake. The shop where Dad works is understaffed, so he’s under a lot of stress. Sometimes I worry he’s going to overheat and blow a gasket or something, like some old car.
[Show full text]
Commodore Sailing Across Atlantic
Report from Guy Davison our Commodore about his latest adventure sailing across the Atlantic. On ARC Rally 2019 What is the ARC Rally? The ARC (Atlantic Rally for Cruisers) was first conceived in 1986. It started out as a safe way to cross the Atlantic in the company of other yachts. Since then it has grown, turned into more of a race, become more and more competitive and attracted bigger and faster yachts. Now over 200 yachts take part in it each year. The ARC is a rally of suitable yachts sailing from Las Palmas in the Canaries to St Lucia in the eastern Caribbean, so going West across the whole Atlantic. The Event organisers, World Sailing, are wonderful folk with boat safety and sailor nurturing at their heart, but also great hosts with a celebration of sailing being at the centre of their activities. Getting Involved Since Guy retired from paid work, he now works for free, his decision making has been somewhat suspect, so when he was approached by two young Itchenor based firefly sailors to join them sailing across the Atlantic, he agreed, though after a few weeks of consideration. Guy's nature is risk averse and just looking up the boat's rigging gave him a nauseous feeling, rather like when up the long ladder at home cleaning the gutters. But the idea had appeal, though two of the crew, Alice and Arthur aged 6 and 8 gave food for thought! So the crew was to be 4 adults and 2 youngsters, though both were given buoyancy aids at their christenings! Yacht Moody 47 On to the yacht itself, Alisara's a Moody 47, moulded in Plymouth and finished off in Southampton which looked splendid with months of refurbishment done by Douglas and Hermione Pattison, two fun loving class stalwarts, but with Douglas also having loads of international 14 campaigning under his belt.
[Show full text]