Name of the Subtopic Quasistaticmax Discount PROCESS Code Y201 Q

Home , Bahmani Sultanate

Name of the Subtopic QUASISTATICMax Discount PROCESS code Y201 Q. 1. Which, of The following Articles of the Constitution of India provides provisions for a joint sitting of both Houses of Parliament? (a) Article 108 (b)Article 122 (c) Article 93 (d)Article 126

Ans. (a) QUASISTATICMax Discount PROCESS code Y201 Q. 2. The Education Minister of a State Government is appointed by the ______on the advice of the (a) Governor : Chief Minister (b)President: Governor (c) Chief Minister : Governor (d)Chief Minister : Prime Minister

Ans. (a) QUASISTATICMax Discount PROCESS code Y201 Q. 3. What is the name, in brief, of the new Umbrella Scheme aimed at ensuring remunerative prices to the farmers for their produce? (a) PM-SADBHAV (b)PM-AASHA (C)PM-NYAAY (d)PM-SAMTA

Ans. (b) QUASISTATICMax Discount PROCESS code Y201 Q. 4. The Government of India has proposed to merge Dena Bank and Vijaya Bank along with which of the following banks? (a) Punjab National Bank (b) Bank of Baroda (c) Central Bank of India (d) Bank of India

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 5. Who is the Chairman and Managing Director of Small Industries Development Bank of India (SIDBI) as of October 2018? (a) A jay Kumar Kapur (b)Manoj Mittal (c) Badruddhin Ajmal (d)Mohammad Mustafa

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 6. Who has been appointed as the current Chief Justice of India and took over the office on 3rd October, 2018? (a) Justice Jasti Chelameswar (b) Justice Madan Lokur (c) Justice Justice Joseph (d)Justice Ranjan Gogoi

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 7. Which among the following was the capital of Bahmani Sultanate? (a) Golkonda (b) Berar (c) Gulbarga (d) Bellary

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 8. Which of the following rivers flows into the Arabian Sea? (a) Krishna (b) Godavari (c) Luni (d) Sabarmati

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 9. The force of friction always______the applied forces. (a)adds up to (b) opposes (c) reflects (d) conducts

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 10. While connecting an LED to a circuit, the longer lead is always connected to the_____ terminal of the battery and the shorter lead is connected to the other terminal of the battery. (a)negative (b) positive (c) neutral (d) equal

Ans. () Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 11. In which state are the Rock Shelters of Bhimbetka, a UNESCO site, located? (a) Karaataka (a) Andhra Pradesh (a) Gujarat (a) Madhva Pradesh

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 12. Which of the following nations hosted the Asia Cup 2018 Cricket tournament? (a) Bangladesh (b) Sri Lanka (c) United Arab Emirates (d) Pakistan

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 13. Hrithik starts walking towards East. After walking 50 m, he turns left and walks straight for 15 m. At this point, he again turns left and walks straight for 30 m and once again turns left and walks a distance of 15 m. How far is he from the starting point? (a) 80m (b)45m (c) 20 m (d) 30m

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 14. Which of the options depicts the correct mirror image of the following figure? ASPIRE (a) (b) (c) (d)

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 15. Consider the given question and decide which of the stateinent(s) given beiow it is/are sufficient! necessary to answer the question. Which year was Sudhanshu born in? Statements: 1. Sudhanshu is 6 years younger than his brother as of today. 2. Sudhanshu's mother, who was born in 1970, is 24 years older than Sudhanshu's brother. (a) Statement l alone is sufficient while statement 2 is insufficient. (b) Either statement 1 or 2 is sufficient. (c) Statement 2 alone is sufficient while statement 1 is insufficient. (d) Both statements 1 and 2 together are sufficient, Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 16. Select the number pair which is different from the other three responses? (a)77-19 (b)92-23 (c) 125-31 (d)157-39

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 17. Based on figures A and C, select the option that can replace the question mark (?) in figure B.

(a)71 (b)67 (c) 81 (d) 77

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 18. Identify the next logical letter pair in the given pattern. HS, JQ, LO. NM, ______(a)OL (b)PK (c) MN (d) KP

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 19. Sitting in a row, six Indian cricket fans K, L, M. N, O and P are watching an India versus Australia match. Of these, L, M, O and P are girls and the rest are boys. K, N and L have painted their faces while the rest are holding India Flags. N. O and P are wearing the Indian team Jerseys and the rest were wearing normal T-shirts. Which two people are girls, holding Indian Flag and wearing Indian team Jerseys? (a)OandP (a)LandP (a)MandO (a)LandM Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 20. Choose the alternative from the given options that will complete the given number series. 72, 83, 105, 138, 182, ______. (a) 258 (b)237 (c) 278 (d) 224

Ans. () Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 21. U, V, W, X and Y are five cousins, X is half die age of V; V is half the age of U. Y is half the age of X. If Y is 4 years old, what is the age of V? (a) 16 years (8 years (c) 32 years (d) 48 years

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 22. If the positions of the first and the sixth digits of the number 341285769 are interchanged and similarly, the second and the seventh digits are interchanged, which of the following will be 3rd to the left of the 7th digit from the left end? (a)9 (b)7 (c) 2 (d) 3

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 23. Select the response that is DIFFERENT from the other three responses. (a) WETX (b)EHDI (c)CFBG (d)QTPU

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 24. Some equations are solved on the basis of a certain system. Find the correct answer for the unsolved equation on that basis. 4+25 = 81; 9+ 49 = 256; 7+16 = ? (a) 121 (b)256 (c) 16 (d) 88

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 25. A 30 m chain used for a survey was found to be 30.10 m at the beginning and 30.30 m at the end of the work. The area of the plan drawn to a scale of 1 cm = S m was measured with the help of planimeter and was found to be 42.50 sq. cm. What is true area of the field? (a) 3456.4m2 (b)2890.9m2 (c) 2756.4m2 (d) 2567.0m2

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 26. Which of the following levelling is necessary for carrying levelling across any obstacle requiring a long sight between two points so situated where no place is there for the setup of the level midway between two points? (a) Differential leveling (b) Reciprocal levelling (c) Precise leveling (d) Fly leveling

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 27. Which of the following chains was originally used for land measurement with a length of 66 ft? (a)Metric Chain (b) Engineer's Chain (c) Gunter's Chain (d) Revenue Chain

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 28. In plane table survey, both horizontal and vertical distances will be obtained directly using ______: (a) tacheometer (b)plane alidade (c) telescopic alidade (d) plumb bob

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 29. What is the main objective of providing tie line in chain survey? (a) To take the details of the nearby objects. (b) To find the horizontal angles, (c) To find the length of base line. (d) To check the precision of the survey.

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 30. The ruling principle of plane surveying is to work from: (a) lower level to higher level, (b) whole to part, (c) part to whole, (d) higher level to lower level

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 31. The short- term modulus of elasticity of concrete (in N/mm2) as per IS 456- 2000 is given by: (a) 5000 ck (b)3000 ck (c) 3700 ck (d) 5700 ck

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 32. Which of the following is NOT an objective of seasoning timber? (a) Reduction of weight of the timber. (b) Reduction of,natural defects in timber. (c) Reduction in shrinkage and warping. (d) Increase in strength and durability.

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 33. A 6-hour rainfall of 6 cm at a place A was found to have a return period of 40 years. The probability that a 6 hour rainfall of this or larger magnitude will occur at least once in 20 successive years is: (a) 0.308 (b)0.015 (c) 0.605 (d) 0.397

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 34. Water absorption of a good brick should NOT exceed ______of its dry weight when kept immersed hi water for 24 hours. (a) 10% (b)20% (c) 30% (d) 25%

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 35. In theodolites, the axis of rotation of telescope in the vertical plane indicates: (a) vertical axis (b) axis of telescope (c) line of collimation (d) horizontal axis

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 36. What is the radius of one degree curve? (a) 1619m (b)1719 m (c) 1729 m (d) 1769 m

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 37. Mohr's scale is used to determine______of the stone. (a) durability (b)flakiness index (c) hardness (d) toughness

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 38. The plane table survey works based on the principle of: (a) parallelism (b)traversing (c) triangulation (d)reconnaissance

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 39. The spacing between adjacent spurs in river training work is generally kept between ______times the spur length. (a) 1.5 to 2.5 (b)1 to 2 (c)2to2.5 (d)2.5to3.5

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 40. As per IS 456-2000, die minimum grade of concrete used for severe exposure condition should be: (a) M10 (b)M30 (c) M25 (d) M20

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 41. A fluid in which shear stress is more than yield value and shear stress is proportional to shear strain is known as fluid. (a) Ideal fluid (b)Newtonian (c) Non-Newtonian (d)Ideal plastic

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 42. The permissible error (E) for the Precise levelling type with distance (D) in kilometre is given by: (a)E=±0.025 (b)E=±0.100 (c) E = ±0.012 (d) E = ±Q.006

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 43. The principal chemical constituent present hi argillaceous rock is:

(a) SiO2 (b)Lime (c) Al2O3 (d) Dolomite

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 44. A hydraulic structure is constructed when a Full Supply Level (FSL) of a canal is much higher than High Flood Level (HFL) of the stream which in turn, is lower than the bottom of the canal trough. Such a structure is called as: (a) Super passage (b)Aqueduct (c) Inlets (d) Level crossing

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 45. Which of the following statements is INCORRECT in the case of stiffness of wood? (a) Structural sizes of timber are stiffer than the clear small sticks (b) Green timber is stiffer than when seasoned. (c) Denser wood is stiffer. (d) Wood is not a stiff material.

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 46. In the stability of floating bodies, the stable equilibrium is attained if the meta centre (M) point_the centre of gravity (G). (a) lies above (b) coincides with (c) is parallel to (d) lies below

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 47. Generally, the swelling of wood along the length of fibres ranges from: (a) 6 to 12% (b)0.1 to 0.8% (c) 13 to 15% (d) 3 to 5%

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 48. Which one of the following is NOT a direct stream flow measurement technique? (a) Dilution method (b) Area-velocity method (c) Slope-area method (d) Ultrasonic method

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 49. The test which is NOT used to measure the workability of concrete is called______test. (a) Compacting factor (b) Vee-Bee (c) Le-chateiiers (d) Slump

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 50. The relation between the effective modulus Ece, short term static modulus Ece, short term static modulus Ec and creep coefficient q of concrete is given by: (a) (b) (c) (d)

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 51. According to IS 456-2000. the exposure condition of concrete surfaces to coastal environment completely is classified as: (a) Moderate (b) Severe (c) Extreme (d) Very severe

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 52. Steel Bbeam theory is the method used to anaiysze and ill the design of a design of: (a) Singly reinforced sections (b) Both singly & doubly reinforced section (c) Doubly reinforced sections (d) Column structures only

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 53. Water-cement ratio is the ratio of: (a) water to cement by volume (b) cement to water by weight (c) water to cement by weight (d) cement to water by volume

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 54. The guidelines for Pre-stressed concrete is given by which of the following Bureau of Indian Standard codes? (a) IS 2116- 19S0 (b) IS 269 - 2015 (c) IS 456-2000 (d) IS 1343-1980

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 55. According IS 456-2000, the nominal cover provided for the concrete surfaces exposed to very severe environmental conditions shall NOT be less than : (a) 75mm (b)30 mm (c)50mm (d)45mm

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 56. Which, of the following coagulants is most commonly used in sedimentation process in water treatment plant? (a) Albuminoidal nitrogen (b) Potassium sulphate (c) Aluminium sulphate (d) Nitric sulphate

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 57. The population forecasting method which that is based on the assumption that the percentage increase in population from one decade to the other decade remains constant is called______method. (a) geometrical increase (b) arithmetical increase (c) incremental increase (d) decrease rate of growth

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 58. Which of the following is a disadvantage in the case of Freyssinet system of post tensioning? (a) Projection of plug left in concrete (b) Safeguarding of wires is economical (c) Stresses in the wires are not similar (d) Rapid attainment of stretching force

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 59. A rectangular concrete beam of 250 mm wide and 600 mm deep is pre-stressed by means of four 10 mm diameter high tensile bars located at 200 mm from the soffit of the beam, If the effective stress in the wires is 500 N/mm2. What is maximum bending moment that can be applied to the section WITHOUT causing tension at soffit of the beam? (a) 24.5 kNm (b) 26.5 kNm (c) 31.5 kNm (d) 38.5 kNm Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 60. The pipes which that are frequently used in green building projects for water supply are called______pipes. (a) Chlorinated polyvinyl chloride (b) Polypropylene (c) Polybutylene (d) Polyethylene

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 61. As per IS 1343-1980, the minimum 28 day compressive strength for pre-tensioned members is: (a) 50 N/mm2 (b)30 N/mm2 (c) 25 N/mm2 (d) 40 N/mm2

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 62. Which of The following post tensioning system adopts metallic sandwich plates, flat wedges and distribution plate for anchoring the wires? (a) Magnel-Balton (b) Lee-McCall (c) Gifford-Udall (d) Freyssinet

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 63. The upward deflection of a pre-stressed beam with a straight tendon at a uniform eccentricity below the cemroidal axis is given by-----, where P-effective pre- stressing force, e-eccentricity, L-length of the beam. E-Modulus of elasticity. I - moment of inertia: (a) –PeL2/14EI (b) –PeL2/8EI (c) –PeL2/4EI (d) –PeL2/16EI

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 64. As per IS 10500: 1991, what Is the permissible limit in the absence of alternate sources for the total hardness of drinking water? (a) 600 mg/l (b)300 mg/l (c) 800 mg/l (d) 500 mg/l

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 65. Which of the statements is correct hi the case of slow sand filters? (a) They require low turbidity water. (b) They are relatively simple to operate. (c) They have a large land requirement. (d) They are labour-intensive:

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 66. The minimum reinforcement used in either direction of the slabs shall NOT be______of the total cross sectional area for Fe 250 grade steel. (a) < 0.1% (b)<0.25% (c) <0.15% (d) <0.2%

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 67. Which of the following systems is used for pre-tensioning? (a) Gifford-tJdall system (b) Freyssinet system (c) Magnel-Blaton system (d) Hover's long line system

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 68. In limit state design, the values of consideration of factor of safety for concrete and steel, respectively, in limit state design are: (a)1.50and1.17 (b)2.00and1.70 (c)1.50and1.15 (d)1.50and1.50

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 69. The maximum spacing of shear reinforcement along the axis of the member shall NOT exceed_____times the effective depth of the section for vertical strips (a)0.65 (b)1.20 (c) 0.50 (d) 0.75

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 70. The analysis of pre-stressed concrete members is based on which of the following concepts? (a) Shear stresses (b) Combined stresses due to direct load and bending stresses (c) Overhead stresses (d) Princiole stresses

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 71. A concrete beam is pre-stressed by a cable carrying an initial pre-stressing force of 300 kN, area is 300 mm2, what is the percentage of loss of stress due to shrinkage hi pre-tensioned members? (a)6.3% (b)2.3% (c) 4% (d) 5.3%

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 72. The tensile stresses at a point across two mutual perpendicular planes are 150 N/mnr and 75 N/mm2. What is the normal stress on the plane inclined at 35° to axis of the minor stresses? (a) 128.64 N/mm2 (b)125.33 N/mm2 (c) 115 N/mm2 (d) 120.50 N/mm2

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 73. The deflection of the centre of the simply supported beam carrying point load at the centre is given by: (a) -WL3/48EI (b)-5WL2/384EI (c) -WL2/24EI (d)–WL3/3EI

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 74. Removal of excess chlorine resulting from super chlorination, in pan, or completely, is called (a) De-chlomiation (b)Pre-chloimation (c) Re-chiorination (d)Post-chlorinatlon

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 75. In the case of a triangular section, the shear stress is maximum at the: (a) Neutral axis (b) Height of 2h/3 (c) Height of h/2 (d) Centre of gravity

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 76. The effective size of the sand particles used in the top layer of slow sand filter is in the range of: (a) 0.45 to 0.70 mm (b)0.40 to 0.60 mm (c) 0.20 to 0.30 mm (d) 0.35 to 0.55 mm

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 77. The best method for controlling taste and odor problems in water is through ______process. (a) hydration (b)reduction (c) coagulation (d) oxidation

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 78. Which of the following characterises biochemical treatments of sewage effluents? (a) Snlphonifieation (b) Oxidation (c) Chlorination (D) Redox

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 79. A cylinder is considered to be a "thin cylinder1, if the thickness to internal diameter of the cylindrical shell is; (a) greater than 1/20 (b)less than 1/10 (c) less than /20 (d) greater than 1/10

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 80. A rectangular steel bar, which is of 2.8 111 long and 15 nun thick, is subjected to an axial tensile load of 40 kN. If width of the bar varies from 75 mm at one end to 30 mm at the other end, then what is the extension of the bar if E = 2 x 106 N/mm2? (a) 0.86mm (b)0.36 mm (c) 0.76 mm (d) 0.50 mm

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 81. What does Chemical Oxygen Demand (COD) indicate? (a) Biodegradabiiity of the waste water (B)Strength of a sewage (c) Age of the sewage (d)Potential for recycling of the wastewater

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 82. What will be the Sludge Volume Index (SVI) if 100 ml of sludge collected in 30 mins on drying weighs 800 mg? (a) 115 (b)78 (c) 125 (d) 100

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 83. What is the section modulus for a rectangle beam of size 200 mm x 350 mm? (a) 4.34×106mm3 (b)4.08 ×106mm3 (c) 5.6×106mm3 (d) 5.21×106mm3

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 84. For the sludge digestion system to work effectively, the pH of the sludge should be between: (a) 10-12 (b)8.5-10 (c) 3.5-5.5 (d) 6.5-7.4

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 85. Elongation of a bar due to its self-weight is computed by______, where L- length of the bar, E - Young's modulus of ‘ elasticity and W- total weight the bar material. (a) WL2/2F (b)WL/4E (c) WL/2E (d) WL/8E

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 86. For the clamped __ free column, the effective length is equal to: (a) twice the actual length (b) 0.5 times the actual length (C) the actual length (d) 0.7 times the actual length

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 87. The strain energy stored in a body with sudden load application, the maximum stress induced is twice the stress induced when: (a) the same load is applied suddenly. (b) the same load is applied gradually. (c) the same load is applied by an impact (d) the torque of same load is applied.

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 88. When does contra flexure point occur on a beam? (a) When bending moment is maximum. (b) When bending moment changes its sign (c) When shear force is zero after changing its sign, (d) When shear force is constant.

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 89. In a simple stress-strain test, the volumetric strain is equal to_____strain. (a) two times the shear (b) three times the linear (c) two times the linear (d) three times the shear

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 90. The first Indian railway train started in the year ______and travelled between _____. (a) 1880; Delhi and Agra (b)1875; Kachiguda and Secunderabad (c) 1850; Bombay and Pune (d) 1853; Bombay and Thane

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 91. Which of the following alignments is normally NOT used in mountain regions (a) Switch-back alignment (b)Spiral alignment (c) Zigzag alignment (d) Horizontal plane alignment

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 92. The standard formation width of single line broad gauge in embankment in Indian railways is : (a) 5.40m (b)4.88m (c) 6.10 m (d) 4.27 m

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 93. As per Indian railway standards, the width of the broad gauge is : (a) 1435mm (b)1524 mm (c) 1676 mm (d) 1000 mm

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 94. The load per unit rail length required to produce one unit depression in the rail bottom is called ______modulus. (a) Shear (b)Elastic (c) Ballast (d) Track

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 95. The speed factor for the speed above 100 km/h given by German formula, which is adopted in Indian railways after 1966 is :

. . (a) (b)

. . (c) (d)

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 96. The relative density of granular soils is given by the relation :

(a) (b)

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 97. The function of a fish plate is to hold two rails together in: (a) Both the horizontal and vertical planes (b)Oblique plane only (c) Vertical plane only (d)Horizontal plane only

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 98. If a broad gauge track is laid with wooden sleepers with a sleeper density of M + 7, spacing of sleeper is 68 cm and the width of the sleeper is 25.4 cm. then the depth of the ballast cushion would be: (a) 22.5cm (b)21.3cm (c) 24.0 cm (d) 23.0 cm

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 99. The stability of the formation slope railway line is generally determined by the______method. (a) Mohr circle (b) Slip circle (c) Rankine's (d) Least square

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 100. The coefficient of curvature from the grain size distribution curve is given by:

(a) (b)

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 101. As per Indian railway standards, the length of rail used hi broad gauge is: (a) 13m (b)11m (c) 12m (d) 10m

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 102. The distance between the gauge faces of the stock rail and the tongue rail at the heel of the switch is called: (a) Throw of the switch (b) Flange way clearance (c) Switch angle (d) Heel divergence

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 103. Which of the following is a requirement from a railway sleeper? (a) It should transfer the load evenly from the rails to a wider area of the ballast. (b) It should give a firm and even support to the rails. (c) It should have sabotage and theft feautres. (d) It should hold the rails in their correct gauge and alignment

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 104. What is the reason for preferring triaxial shear test over direct shear test? (a) Accurate measurement of pore water pressure and change in volume is not possible during the test. (b) Stress distribution on the failure plane is non-uniform. (c) The test provides better correlation for effective stress of angle of friction. (d)Test can be performed under all three drainage conditions with complete control. Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 105. According to standard test method ASTM D-43 IS, the moisture content (the liquid limit of a soil) is determined by Casagrande's liquid device, at which a groove closure of_occurs at_blows. (a) 11.7mm, 20 (b)12.7 mm, 20 (c) 11.7 mm, 25 (d) 12.7 mm, 25

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 106. What will be the dry unit weight (in kN/m3 )for a saturated soil, given that moisture content (w) = 35% and specific

gravity of soil (GS = 2.5? (a) 12.08 kN/m3 (b)13.58 kN/m3 (c) 11.08 kN/m3 (d) 10.68 kN/m3

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 107. Which one erf the following is a DEMERIT of triaxial test? (a) The specimen is free to fait on the weakest plane. (b) The pore pressure and volumetric changes can be measured directly. (c) The stress distribution on the failure plane is uniform. (d)The consolidation of the specimen is isotropic in the test but anisotropic in the field.

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 108. Lime stabilisation is most commonly used for stabilizing: (a)Cement (b)Sands (c) Clays (d) Bitumen

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201

Q. 109. The intensity of vertical stress (sz) of the soil just below the load point is given by____, where Z- vertical distance between point load and the polar stress and Q- point load. (a) 0.4775 (b)0.4775 (c) 0.4775 (d) 0.4775

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 110. If the capillary rise in a soil A with an effective size of 0.02 mm was 60 cm, then what would be the capillary rise in the similar soil B with an effective size of 0.04 mm? (a) 30cm (b)20cm (c) 40cm (d) 35 cm

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 111. Unified soil classification system is almost similar to______classification. (a) IS soil (b)AASHTO (c) MIT (d) Textural

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 112. The liquid limit is determined from casagrande apparatus. The apparatus consists of a semispherical brass cup that is repeatedly dropped onto a hard rubber base from a height of: (a) 10mm (b)15mm (c) 20 mm (d) 5 mm

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 113. For flow-through soils, the flow is laminar when the Reynold number is: (a) greater than 2000 (b) Less than 2500 (c) greater than unity (d) less than unity

Ans. (d) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 114. For a soil, if the sensitivity value varies from 2.0 to 4,0, then such a soil is these soils are classified as: (a) Extra sensitive (b) Sensitive (c) Moderately sensitive (d) Little sensitive

Ans. (c) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 115. The load per unit area of the foundation at which shear failure in soil occurs is called the: (a) A Degree of consolidation (b) Ultimate bearing capacity (c) Shear resistance (d)Punching shear failure

Ans. (b) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code QUASISTATICMax Y201Discount PROCESS code Y201 Q. 116. According to Terzaghi's bearing capacity theory for foundations, a foundation is shallow if: (a)Depth is less than or equal to width (b) Depth is greater than or equal to2 times the width (c) Depth is greater than 2 times the width (d) Depth is greater than width

Ans. (a) Youth Solver Series-2000 Qns.-Lect-10 || Join Engineering Mahapack|| By code Max Y201Discount code Y201 Q. 117. In a modified proctor test for compaction of soils, the mass of the rammer is of______and dropped at a height of (a) 2.6 kg. 310 mm (b)2.6 kg; 450mm (c) 4.89 kg. 310 mm (d) 4.89 kg; 450 mm

Ans. (d)