download linux mint iso hawaii.edu Linux Mint 20.2. The purpose of Linux Mint is to produce a modern, elegant and comfortable operating system which is both powerful and easy to use. Download. What's New. Certified. Similar to 6. Linux Mint w/ Cinnamon 64-bit Linux Mint w/ Cinnamon 32-bit Linux Mint w/ MATE 64-bit Linux Mint w/ MATE 32-bit Linux Mint w/ Xfce 64-bit Linux Mint w/ Xfce 32-bit. Started in 2006, Linux Mint is now the 4th most widely used home operating system behind Microsoft Windows, Apple Mac OS and Canonical's Ubuntu. Some of the reasons for the success of Linux Mint are: It works out of the box, with full multimedia support and is extremely easy to use. It's both free of cost and open source. It's community-driven. Users are encouraged to send feedback to the project so that their ideas can be used to improve Linux Mint. Based on Debian and Ubuntu, it provides about 30,000 packages and one of the best software managers. It's safe and reliable. Thanks to a conservative approach to software updates, a unique Update Manager and the robustness of its Linux architecture, Linux Mint requires very little maintenance (no regressions, no antivirus, no anti-spyware. etc). If you are interested in giving Linux Mint a try on your current computer without running any risk, please check out our Guide: Running Linux From a USB Drive As a Virtual Machine or Bootable Disk. Requirements. 64-bit architecture. Although both 32-bit and 64-bit versions of Linux Mint 19.3 are supported until April 2023, new releases of Linux Mint, including 20, are only available in 64-bit. To upgrade to Linux Mint 20 you need to be running the 64-bit version of Linux Mint 19.3. To check which version you’re running type: dpkg --print-architecture If it says amd64 you can upgrade to Linux Mint 20. If it says i386, it means you’re using the 32-bit version. In this case you cannot upgrade and you need to stick with Linux Mint 19.3. What's New: Linux Mint 20.2 is a long term support release which will be supported until 2025. It comes with updated software and brings refinements and many new features to make your desktop experience more comfortable. Update Manager. Cinnamon updates. The Update Manager now supports Cinnamon spice updates (i.e. updates for applets, desklets, themes and extensions). Although they're technically different than APT updates, they are presented to you in a very similar manner. You can see the same kind of information for them, and enjoy the same features as you did already, such as the ability to blacklist a particular spice or a version of a spice. You can also automate spice updates. In automatic mode spices are upgraded shortly after you log in and the desktop environment then gets refreshed. This is barely visible (Cinnamon restarts itself seamlessly, you just see the mouse cursor get reset on the screen when this happens) and a notification pops up to show you what was upgraded. Automated Cinnamon Spice updates. Notifications. In the past, available updates were simply indicated by a little orange dot on the Update Manager's icon in the system tray and could go unnoticed for long periods of time. In Linux Mint 20.2 the Update Manager is now able to remember how long each update has been available for, how many days the computer was ON during that time and assess whether or not a notification would be welcome to remind you of available updates. Updates notification. This new notification feature was designed to add comfort to the user experience, not remove any, so making sure it was a nice addition and not an annoying distraction was key. The way this is handled in other operating systems such as Windows or Mac for instance was an example Linux Mint did not want to follow. For the notification to be welcomed and welcomed again it needs to happen for a reason, to be easy to dismiss if your are busy, to not come back constantly and to not come back at all for a long while after you apply the updates. When a notification is dismissed it is snoozed for 2 days. When updates are applied it goes away for a long time. The conditions for the notification to be shown in the first place are configurable. Notification preferences. By default, the Update Manager shows a notification if a particular update has been available for more than 7 logged-in days or if it's older than 15 calendar days. These values can be configured all the way down to 2 days or all the way up to 3 months. By default the Update Manager also only counts security and kernel updates as being relevant for notifications but you can change that in the preferences. The last setting is a grace period. If any update has been applied on your computer in the last 30 days, whether it's via the Update Manager or via another APT software, no notifications will be shown. On computers where updates are not wanted and 3 months is not enough there's no need to keep the Update Manager running in the background and it can be disabled entirely. Other improvements. The Update Manager handles the automation of Flatpak updates. This was previously located in "Startup Applications". Automated Flatpak updates. Unused Flatpak runtimes are automatically removed when this option is active. The power source of the computer is now checked prior to the launch of automated updates to ensure they do not run when the computer is on battery. Bulk File Renamer. A new application was implemented to add the ability to bulk rename files. This new application is called Bulky and it is installed by default in Linux Mint 20.2. You can launch it from the application menu and then select files, or just select multiple files in your file manager, right-click and choose "Rename. ". Sticky Notes. Sticky Notes replaces GNote as the default application for taking notes. Similar to GNote, Sticky is developed in GTK3, supports HiDPI and integrates very well in the desktop environment. In addition to the features which were present in GNote, Sticky also lets you place the notes on the desktop and quickly access them from the icon tray. Notes can be of different colors and the text inside of them can be formatted. Sticky also features a backup mechanism and can import your GNote notes. Warpinator. With Warpinator you could already transfer files from computer to computer across the local network but thanks to a new Android app you can now also do so with your phone and tablet. To install Warpinator on your Android device simply search for it in the play store, or use the link below: The latest version of Warpinator features the ability to select which network interface you want to use. If you are connected to multiple interfaces (Wireless + ethernet for instance) this allows you to select which network you want to share files on. Nvidia Optimus. Linux Mint 20 features improved support for Nvidia Optimus. The NVIDIA Prime applet now shows your GPU renderer and you can select which card to switch to straight from its menu. The NVIDIA "On-Demand" profile is also now fully supported. When you run in that mode, it is your Intel card which renders the session and a menu option is available to let you offload a particular application to your NVIDIA card. Select an application in the menu, right-click and select "Run with NVIDIA GPU". It’s that simple. From the command-line, two new commands are available to offload to GLX or to Vulkan: nvidia-optimus-offload-glx nvidia-optimus-offload-vulkan To boost compatibility and make it easier to boot Linux Mint 20 in live mode without NVIDIA drivers, "nomodeset" was also added to the "Compatibility Mode". Tray. XAppStatusIcon received the ability to handle mouse wheel scrolling events and a new function similar to gtk_menu_popup() which makes it even easier than before to port applications from GtkStatusIcon. In all editions (Cinnamon, MATE and Xfce) many of the tray icons were harmonized, given symbolic icons and HiDPI support. Blueberry, mintupdate, mintreport, nm-applet, mate-power-manager, mate-media, redshift, rhythmbox all use XAppStatusIcon and give the tray a consistent look in Mint 20. Cinnamon 4.6. The performance of the Nemo file manager was improved. The new version tries to prioritize content and navigation and to delay thumbnails as much as possible. As a result, the content of directories shows up with generic icons before the thumbnails are rendered, but the improvement in performance is quite noticeable. This also has a positive impact on performance in cases of heavy I/O and slow HDDS, such as when moving videos to external devices. In the Display Settings, it is now possible to set the refresh rate. Cinnamon 4.6 also introduces fractional scaling. Until now your scaling was either 100% (normal mode) or 200% (HiDPI mode) and it was the same for all your monitors. With Cinnamon 4.6 each monitor can have a different scaling and it can be set to values in between 100% and 200%. In normal mode the resolution you set is the resolution you see. In HiDPI, at 200% scaling, the screen is showing twice the pixel density so everything looks sharper, but the resolution you see on the screen is only half the resolution of your monitor. Many HiDPI displays have a resolution which is actually quite small once HiDPI is activated. Take a 13" Macbook Retina 2013. Its screen resolution is 2560×1600. That’s too much for a 13" screen; Applications, text and desktop items look way too small. In HiDPI mode, the screen shows twice the pixel density and everything looks really crisp, but look what happens to the resolution… it gets halved to 1280×800. The problem then is that 800px is not enough in terms of screen space, and some applications don’t even fit in it. A display like this one looks perfect in 1200px and that unfortunately means reducing the actual resolution to 1200px and not using HiDPI. Another issue with HiDPI is multi-monitor support. You could plug an external monitor to this Macbook in the hope to stay in HiDPI on the laptop but to be in normal mode on the monitor. That wasn't possible before though, either all screens or none at all could be in HiDPI. and a non-HiDPI compatible screen set in HiDPI was just unusable. Fractional scaling addresses these limitations. By being able to set the scaling for each monitor independently and allow for scaling values of not only 100% and 200% but also 125%, 150%, 175%, Cinnamon 4.6 tries to get higher pixel density and to allow HiDPI and non-HiDPI monitors to play well with each others. In the example of the Macbook plugged to a non-HiDPI monitor, we’d typically set the Macbook to 150% and the monitor to 100%. Under the hood, the entire desktop environment would run in HiDPI mode, but the actual scaling of the Macbook screen would be reduced from 200% to 150% and the scaling of the monitor from 200% to 100%. We’d end up with a monitor which looks perfectly normal, and a Macbook screen which has a nice 1200px resolution and a "half-hidpi" 1.5 pixel density, which doesn’t look as crisp as full-hidpi, but looks crisper than in normal mode. Middle-clicking the keyboard applet cycles keyboard layouts. Cinnamon screensaver supports custom commands, making it possble to use alternative screen lockers with Cinnamon. XApps improvements. Xed received the ability to join lines together and to remove trailing whitelines before saving files. Xviewer received fullscreen and diaporama toolbar buttons and remembers if its window was maximized. In Xreader a print button was added to the toolbar. To guarantee better support for modern Electron apps and indicators XappStatusIcon received mouse wheel support and SNI (StatusNotifier, libIndicator) support. Other improvements. Gdebi, the tool used to open and install .deb files was given a new user interface. The login screen (Slick Greeter) supports stretching backgrounds across multiple monitors. System improvements Apturl switched backend from Synaptic to Aptdaemon. APT recommends are enabled by default for newly installed packages (not for upgrades). Snapd is disabled by default and APT packages are not allowed to install it. Live sessions running under Virtualbox automatically get their resolution bumped to a minimum of 1024x768. This release ships with linux-firmware 1.187 and the Linux kernel 5.4. Artwork improvements. The Mint-Y theme provides a nice variety of colors. A community project was started on Github to gather feedback and fine-tune these colors to find the right balance between colorful vibrant hues and contrast levels which don't take the user's focus away from the content being shown on the screen. Yellow folders are also available. Main components. Linux Mint 20 features Cinnamon 4.6, a Linux kernel 5.4 and an Ubuntu 20.04 package base. How to Install Linux Mint 19 from USB Drive. Linux Mint 19 features a nice looking Cinnamon desktop environment. Linux Mint 19 also has images for MATE and XFCE desktop environment. Beta version of Linux Mint 19 is available for download at the time of this writing. Stable version should be released at the end of June according to Linux Mint’s blog. In this article, I will show you how to make a Linux Mint 19 bootable USB drive and install Linux Mint 19 from it. Let’s get started. Downloading Linux Mint 19: When the stable version of Linux Mint 19 will be released, you can download an image of Linux Mint 19 from https://linuxmint.com/download.php. Linux Mint 19 “Tara” Cinnamon BETA can be downloaded from https://blog.linuxmint.com/?p=3581. Linux Mint 19 “Tara” MATE BETA can be downloaded from https://blog.linuxmint.com/?p=3582. Linux Mint 19 “Tara” XFCE BETA can be downloaded from https://blog.linuxmint.com/?p=3583. I am going use Linux Mint 19 “Tara” Cinnamon BETA in this article. Making Bootable USB Drive from Linux: If you have a Linux distribution such as Ubuntu/Debian/Fedora etc installed on your computer, you can make a bootable USB drive of Linux Mint 19 “Tara” with the following command: / Downloads / linuxmint- 19 -cinnamon-64bit-beta.iso of = / dev / sdb bs =1M. NOTE: Here /dev/sdb is the USB drive. You may have a different identifier. Make sure you check with sudo lsblk before you run this command. Once the process is completed, you should be able to boot from the USB drive. Making Bootable USB Drive from Windows: From Windows, Rufus can be used to make a Linux Mint 19 bootable USB drive. First go to the official website of Rufus at https://rufus.akeo.ie/ and you should see the following window. Scroll down a little bit to the Download section and click on Rufus Portable link as marked in the screenshot below. Rufus Portable should be downloaded. Now run Rufus Portable . Click on No . Rufus Portable should start. Now insert your USB drive. Rufus should detect and select it as you can see from the marked section of the screenshot below. Now click on Select . A file picker should be opened. Select your Linux Mint 19 iso file you just downloaded and click on Open . It should be selected. Now click on START as marked in the screenshot below. Click on YES . If you don’t know what it is, just leave the default and click on OK . All the data of your USB drive should be erased. If you don’t have anything important on your USB drive, click on OK . Otherwise, make a backup of your data and try again. It should take a while for the process to complete. Once it’s completed, you can click on CLOSE . You USB drive is now ready. Booting from the USB Drive: Now that you have a bootable USB drive of Linux Mint 19, you can boot from it and install Linux Mint 19 on your computer. First insert your USB drive to your computer. Now you have to select your USB drive from the BIOS of your computer. Usually you press F2 or Delete or some other keys just after you pressed the power button of your computer. It depends on the motherboard of your computer. Please check the manual of your Motherboard for more information. Once you select your USB drive from the BIOS, you should see the following window. Select Start Linux Mint 19 Cinnamon 64-bit and press
Download Linux Mint Iso Hawaii.Edu Linux Mint 20.2
