sign in sign up
<<
Home , Plaster

Hard Kote Admix

PLASTER Color enhancer

PMM HardKote is a factory blended Coverage Storage mixture of liquid pozzolan and Surface coverage is dependent upon the Store HardKote at room temperature and out of proprietary additives producing condition and porosity of the surface to which it direct sunlight. Use product within six months. a solution that penetrates and is applied. 500 square feet per gallon is possible densifies existing or freshly set under ideal conditions when spraying. Limitations based products Apply only when surface and ambient such as , or Surface preparation temperatures are 50°F - 100°F and relative swimming pool coatings. HardKote The surface must be free of paint, stains, oil, humidity is below 85% throughout the application combines with the calcium scale, efflorescence, or any substance that would and for a minimum of 24 hours thereafter or prior hydroxide (soluble ) component inhibit penetration of HardKote. Any repairs to the to replastering. surface should be accomplished prior to applying of cement to form in soluble Warnings CSH ( Hydrate) HardKote. Wear rubber gloves and eye protection. crystals. This reduces or eliminates Mixing Avoid eye contact or prolonged contact with etching and the efflorescence that HardKote is a liquid concentrate and should be skin. Wash thoroughly after handling. contributes to scale and blotches on mixed with potable water before application. Add EYE, SKIN AND RESPIRATORY IRRITANT.  white and colored plaster. ½ Gallon of HardKote for every 7 bags of PMM KEEP OUT OF REACH OF CHILDREN. Pool Finish and mix thoroughly. DO NOT TAKE INTERNALLY. Features First Aid: • Reduces or eliminates efflorescence Spray Application Eyes – Flush with water for 15 minutes, lifting • Enhances colors A pump-type plastic garden sprayer is eyelids occasionally. Obtain medical attention if • Reduces “PLASTER DUST” in swimming pools recommended to obtain a uniform surface. After irritation persists. a newly-placed, cement-based surface has • Increases abrasion resistance hardened, spray the HardKote evenly over the Skin – Wash skin thoroughly with mild soap and • Reduces surface porosity surface to allow a 15 minute saturation period. cool water. If skin irritation, reddening or a rash occurs, seek medical attention. • Safe and non-toxic Allow the HardKote at least one hour to react Inhalation – If respiratory irritation occurs, move • Anchors glass aggregate with the cement before filling a swimming pool. A surface may be polished after it has hardened to fresh air. Uses sufficiently. Ingestion – Drink large amounts of water. Do not induce vomiting. Call physician immediately. HardKote is used to increase plaster color Clean up (especially on darker colors) and density to assist in preventing efflorescence, scale, staining and Clean all tools and equipment with water blotchy colorations. It can be used in all plaster, while still wet. Cured material can be removed concrete or cement based deck coating products. mechanically or chemically.

1

Quality Products for Quality Projects Winter Springs, FL (800) 432-5539 Pompano Beach, FL (800) 432-5097 www.PMMproducts.com Hard Kote Plaster Admix

warranty enclosing a sample of the product. PREMIX- Product Availability MARBLETITE, upon receipt of the sample from The effectiveness of this product depends upon the buyer, will replace the portion of the product Item # Product Size its proper application and the condition and that is determined to be defective. This shall be 084022 Hard Kote 1 gallon bottle preparation of the surface to which it is applied. the buyer’s sole remedy for breach of warranty Limited Warranty: The product shall be in its and such remedy shall be in lieu of any claim technical services unopened package and of the kind specified for damages, including consequential damages. Refer to material safety data sheet, www. within. THERE IS NO OTHER WARRANTY OR Some states do not allow limitations on how PMMproducts.com and standards prior REPRESENTATION OF ANY KIND, EXPRESS long an implied warranty lasts, or exclusions to installation for additional information. OR IMPLIED (INCLUDING NO WARRANTY OF or limitations of incidental or consequential MERCHANTABILITY OR OF FITNESS FOR A damages, so the above limitations or exclusions For technical assistance please contact our PARTICULAR PURPOSE). No warranty shall be may not apply to you. This warranty gives you Technical Department at (800) 432-5539. implied by law. This limited warranty continues specific legal rights, and you may also have only until such time as the buyer opens the other rights, which vary from state to state. The package and examines its contents. If the buyer, information contained in this bulletin conforms after opening the package and examining its to the standard detail recommendations and contents, determines that the product is not specifications for the installation of the products of the kind specified herein, the buyer should manufactured by PREMIX-MARBLETITE and is write to PREMIX-MARBLETITE presented in good faith. PREMIX-MARBLETITE COMPANY, 1259 NW 21st Street, Pompano assumes no liability, expressed or implied, as to Beach, Florida 33069, explaining the defect and the architecture, or workmanship of any project. A2915-9574

2

Quality Products for Quality Projects Winter Springs, FL (800) 432-5539 Pompano Beach, FL (800) 432-5097 www.PMMproducts.com