The Belsaw Company

Home , Planer (metalworking)

THE BELSAW COMPANY Woodworking Machinery & Accessories 2156 Zanker Road , San Jose, CA 95131 1-800-468-4449 Fax 1-408-453-5515 20042004 www.belsaw.com Serving the Woodworking Industry since 1926!

Some Prices Have Changed Please call for current pricing

Now also stocking Introducing to the Planer/Molders from: Belsaw family:

Woodworking Machinery

Belsaw Planer / Molder Accessories

Feedworks Chain We stock all the Replacement Kit current accessories This kit contains the three drive chains in the model 985 feedworks for your 12”Belsaw, system. Also included is the 20” V-Belt that transfers power from the cutterhead to Foley-Belsaw, and the feedworks. Replacing all three chains at the same time will ensure longer sprocket life and deliv- Powermatic er consistent transfer of drive power to the feed rollers. Planer/Molders! #BRK-1 For model 985 ...... $ 34.95 #BRK-2 For models 910 & 912 ...... $ 47.95 Complete Feedworks Rebuild Kit “Tri-Sand”Abrasive Surfacing System Completely rebuild your planers Install this optional accessory on your feedworks system with this kit. 12” planer-molder to convert it into a Includes all sprockets, chains, surface sanding machine! Very easy to bushings, link adjustment install on the cutterhead of your 12” assemblies, 20” V_Belt, and sprock- planer/molder. With this accessory, you et weldments to replace worn out feed- will be able to sand away any remaining works systems. This kit will breathe new life into your planer/molder, giving you many more mill marks on your planed lumber and years of service. Will not fit on Belsaw planer/mold- save yourself time from tedious hand er models 910/912. Please contact Customer Service sanding. This system comes complete with all required aluminum gibs, for other models. pulley, a set of three (3) 100-grit abrasive pads, and a V-Belt. #BRK-3 ...... $399.95 #4500540 Tri-Sand Attachment ...... $ 96.50 #3703040 80 Grit replacement sheets (3 per pack) ...... $ 8.25 Drive Sprocket Replacement Kit #3703041 100 Grit replacement sheets (3 per pack) . . . . . $ 8.25 This kit contains all the sprockets found in your planer/molders feedworks #3703042 150 Grit replacement sheets (3 per pack) . . . . . $ 8.25 system. Kit fits only the current model 985 planer/molders. #BRK-8 ...... $ 349.95 T-Handle Hex Keys Replacement Feed Rollers #51610 For adjusting jack screws ...... $ 2.99 Replace your #51612 For adjusting gib screws ...... $ 3.49 worn feed rollers with this genuine replacement. Manufactured to original specifications. Sold individually. Feed-Rate Increase Sprocket #4509062 12” Feed Roller ...... $ 44.96 Increase your 12” planer/molder’s feed rate by 60%! #4549008 8” Feed Roller ...... $ 24/95 With just the change of a sprocket, you can speed up Feed Roller Rebuild Kits the feed rate of your Belsaw 12” planer up to 20 feet per minute - a 60% increase over the standard 12 feet Replace your planer/molder’s worn and grooved feed rollers to restore feed per- per minute rate. Your owners manual leads you step formance. This kit includes the front and rear feed rollers, feed roller bush- by step through installation. Ideal for owners who production-plane lumber. ings, and a complete set of feed roller tension springs. With this kit, any feed- ing problems you may have should be eliminated. #4500551 For model 910/912 planers ...... $ 49.95 #4509583 For models manufactured after 1983 ...... $ 41.50 #BRK-4 For model 985 ...... $119.95 #BRK-5 For models 910 & 912 ...... $119.95. Planer Bed Wax Drive Bushing Replacement Kits Extends the life of feed rollers, chains, bearings This kit contains all the bronze oilite bushings found in your planers feed- and sprockets by reducing feed drag. Long last- works system. We suggest you replace all bushings at the same time. ing and very easy to apply. Does not contain sili- #BRK-6 For model 985 ...... $ 22.95 cone. Use on virtually any machine surface. #BRK-10 For models 910 & 912 ...... $ 21.95 Protects against corrosion. 14 ounce can. Bed Elevation Repair Kit #PTCW ...... $ 17.95 Renew the elevation system with this kit that contains the four corner Locking Caster Kit sprockets, bushings and roller chain. Works on models 985, 910 and 912. Fits any Belsaw 12” Planer-Molder as well as the #BRK-7 ...... $ 124.95 Sears 12” Planer-Molders. Set includes 4 thread- Aluminum Gib Replacement Kit ed stem casters with a positive locking foot brake for stability after being moved to the desired loca- This set includes six 5-3/4” gibs, three 1” gibs, three 1” gib spacers and tion and all mounting hardware. all of the necessary socket set screws. Works on models 985, 910 and 912. #4500526 ...... $ 62.50 #BRK-9 ...... $ 79.95

Monday - Friday 1 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Belsaw Planer / Molder Accessories Belsaw Planer Knife Sets Dial Indicator Knife Setting Gauge Position knives to within thousands of an Belsaw Replacement Planer Knives inch. Once you set your knives using this gauge, you will never use anything else again. Made from only the high- Large dial indicator face is easy to read. est quality materials. We Indicator has 1” travel with secondary dial. also have specially priced Measures in increments of .001” Large indi- our sets with quantity cator anvil and instructions are included. discounts so you can stock up with extra sets on hand. 12” knives are #SC-001G ...... $ 76.50 sold three to a set, 8” are sold two to a set. Part # Size Price / 1 ea Price / 2 ea The “Sure-Set”Knife Setting Gauge 4501958 12” $ 48.50 ea $ 41.25 ea 4540858 8” $ 36.95 ea $ 32.95 ea To use this gauge, you run it along the cutterhead and the adjustable floating top pin will indicate knife alignment. An economical alternative to more Belsaw 12”Micro-Bevel expensive gauges. Premium Quality Planer Knives #4501960 ...... $ 32.50 These high speed steel knives feature a secondary bevel ground at the tip that will allow you to get Economy Knife Setting Gauge much more life out of your knives before they This simple gauge straddles the top of the cutter- require sharpening. Further benefits such as a head over the planer knives. Simply raise the knife smoother planed finish make Micro-Bevel knives until it makes contact with the gauge. Instructions the choice of professionals! Sold three to a set. Standard Micro-Bevel are included. #4501963 12” Micro-Bevel knives - one set ...... $ 89.95 ea #MGA-B14D ...... $ 9.95 . . . .

Belsaw Solid Carbide Knives Visit the Belsaw website at: #TN632SC Three to a set ...... $ 349.95 www.belsaw.com Molding Guide System Kit The molding guide system will save you time when making the transition from planing Powermatic 15”Closed Stand to molding operations. Allows for precise alignment and support for work- Planer / Molder piece while molding. Includes all hardware and guides needed to attach • Model #PM15 to your shop-made bed board. • 3 knife cutterhead • 5 HP, 1 phase, 230V motor #4509501 ...... $ 69.95 • Feed rate - planing: 20 FPM • Feed rate - molding: 10 FPM • 6-1/2” max planing thickness Cutterhead Edge Molding Guides • 8” min planing length Use the optional edge molding guides • Weight: 550 lbs. Edge Guide when molding edge profiles such as tongue and groove patterns. Made from heavy gauge formed steel. Zinc plated to guard * See the following pages for against corrosion. Sold individually. molding knife patterns 4 required. #4509492 ...... $ 8.25 ea #1120003 $ 2,469.00 Dust Collector Attachment s Connect your planer to a dust collector for better dust control in the shop. Includes dust port for 4” hose and internal dust channel. Very easy to install. Fits Belsaw model 985 and similar models. Will not fit model 910/912 planers. Index on #4500592 ...... $89.95 page 62

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 2

Belsaw Molding Knives Call for Prices All of our wood molding pattern knives are expertly ground from 1/4” thick high Wide Crown Moldings speed steel knife stock hardened to 65c on the Rockwell Scale. The profiles and sizes shown are those that reflect the most current popular wood moldings. Our Many homes molding knives come complete with all gibs and balance weights to match your around the turn 4570460 selected knife pattern. Please note that certain patterns (such as the crown) require of the century more than one knife to complete the pattern. When the word “Top” follows the pat- used very wide 4570450 tern number, this knife will cut the decorative edge and the bottom knife will product crown moldings the back angles. These patterns will work in any Foley-Belsaw, Foley-United, to bridge the gap 4570440 Belsaw, Sears, or Powermatic Planer / Molders and 13” Woodmaster, RB Industries between the walls & Grizzly Planer/Molders. and ceiling. A common practice was to create a “build-up” molding with a variety of patterns to give the illusion that the crown molding was extremely wide. With If you need a profile that is not pictured here, or wish to have a nine and ten foot ceilings, a large crown will give a balanced feel to the room. pattern custom ground to your specifications, please call or fax Please note that the top knife is used to cut the decorative face and the bottom Belsaw Customer Service at: knife cuts the back angles. 1-800-468-4449 (Fax 1-408-441-1222) Order # Profile Price 4570460 5” Top $ 106.95 Standard Crown Moldings 4570461 5 ” Bottom $ 106.95 4570450 5-1/4” Top $ 108.95 54 4570451 5-1/4” Bottom $ 108.95 53 5-1/2” Top 52 4570440 $ 110.95 51 4570441 5-1/2” Bottom $ 110.95 50 66 49 48 67 47 Standard Bed Moldings 70 71 72 74 75 76 68

57 58 59 60

Similar to Crown moldings but used to bridge smaller areas. crowns are always “sprung” while beds are either sprung or plain. A sprung molding has the interior corner beveled off to better fit a right angle joint.

Order # Profile # Size Price Order # Profile # Size Price 4570470 WP47 11/16” x 4-5/8” Top $ 105.95 4570700 WP70 11/16” x 2-3/4” Top $ 97.95 4570471 WP47 11/16” x 4-5/8” Bottom $ 105.95 4570701 WP70 11/16” x 2-3/4” Bottom $ 97.95 4570480 WP48 11/16” x 4-1/4” Top $ 104.95 4570710 WP71 11/16” x 2-5/8” Top $ 96.95 4570481 WP48 11/16” x 4-1/4” Bottom $ 104.95 4570711 WP71 11/16” x 2-5/8” Bottom $ 96.95 4570490 WP49 11/16” x 3-5/8” Top $ 99.95 4570720 WP72 11/16” x 2-1/4” Top $ 92.95 4570491 WP49 11/16” x 3-5/8” Bottom $ 99.95 4570721 WP72 11/16” x 2-1/4” Bottom $ 92.95 4570500 WP50 11/16” x 3-1/2” Top $ 98.95 4570740 WP74 11/16” x 1-3/4” Top $ 87.95 4570501 WP50 11/16” x 3-1/2” Bottom $ 98.95 4570510 WP51 11/16” x 3-1/4” Top $ 96.95 4570741 WP74 11/16” x 1-3/4” Bottom $ 87.95 4570511 WP51 11/16” x 3-1/4” Bottom $ 96.95 4570750 WP75 11/16” x 1-5/8” Top $ 85.95 4570520 WP52 11/16” x 2-3/4” Top $ 92.95 4570751 WP75 11/16” x 1-5/8” Bottom $ 85.95 4570521 WP52 11/16” x 2-3/4” Bottom $ 92.95 4570760 WP76 11/16” x 1-1/2” Top $ 84.95 4570530 WP53 11/16” x 2-5/8” Top $ 89.95 4570761 WP76 11/16” x 1-1/2” Bottom $ 84.95 4570531 WP53 11/16” x 2-5/8” Bottom $ 89.95 4570540 WP54 11/16” x 2-1/4” Top $ 87.95 4570541 WP54 11/16” x 2-1/4” Bottom $ 87.95 Variable Width 4570570 WP57 11/16” x 3-1/4” Top $ 106.95 Bottom Knife Sets Molding 4570571 WP57 11/16” x 3-1/4” Bottom $ 106.95 4570580 WP58 11/16” x 2-3/4” Top $ 97.95 Can be set up and used with any of the 4570581 WP58 11/16” x 2-3/4” Bottom $ 97.95 above top knife sets. Simply adjust to L R 4570590 WP59 11/16” x 2-1/4” Top $ 92.95 desired width of bottom cut. Includes right and left cutters. 4570591 WP59 11/16” x 2-1/4” Bottom $ 92.95 4570600 WP60 11/16” x 1-3/4” Top $ 87.95 4575450 4570601 WP60 11/16” x 1-3/4” Bottom $ 87.95 45° Variable width knife set ...... $ 99.95 4575238 37° / 53° Variable width knife set ...... $ 109.95 4570660 WP66 11/16” x 3-1/4” Top $ 102.95 4570661 WP66 11/16” x 3-1/4” Bottom $ 102.95 4570670 WP67 11/16” x 2-1/4” Top $ 92.95 4570671 WP67 11/16” x 2-1/4” Bottom $ 92.95 Please Note: 4570680 WP68 11/16” x 1-5/8” Top $ 85.95 4570681 WP68 11/16” x 1-5/8” Bottom $ 85.95 Profiles shown are NOT to scale

Monday - Friday 3 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Call for Prices Belsaw Molding Knives

Standard Cove Moldings Standard Stop Designed for use in a corner as a graceful blend Moldings between two right angle surfaces, as at floor or ceiling. Smaller sizes are often used to clean In window frame applica- up corners in paneling or to give a finished tions, use these moldings look beneath the overhang of a desk top. to hold the sashes in place. On doors, they

stop the door in the WP806 WP836 WP866 WP896 WP926 81 82 83 84 85 86 closed position. These five profiles have proven to be the most popular. Order # Profile # Size Price 90 92 93 93 101 4578060 WP806 1/2” x 1-3/8” $ 55.95 4578360 WP836 1/2” x 1-3/8” $ 55.95 4578660 WP866 1/2” x 1-3/8” $ 55.95 4578960 WP896 1/2” x 1-3/8” $ 55.95 4579260 WP926 1/2” x 1-3/8” $ 55.95 Order # Profile # Size Price 4570810 WP81 11/16” x 3-1/4” Top $ 100.95 Standard Base Shoe & 4570811 WP81 11/16” x 3-1/4” Bottom $ 100.95 4570820 WP82 11/16” x 2-3/4” Top $ 97.95 1/4 Round Moldings 4570821 WP82 11/16” x 2-3/4” Bottom $ 97.95 105 106 107 4570830 WP83 11/16” x 2-5/8” Top $ 95.95 Use these profiles to cover the joint between the base mold and the fin- 4570831 WP83 11/16” x 2-5/8” Bottom $ 95.95 ish flooring to seal against moisture 4570840 WP84 11/16” x 2-1/4” Top $ 92.95 and dirt. 4570841 WP84 11/16” x 2-1/4” Bottom $ 92.95 4570850 WP85 11/16” x 1-3/4” Top $ 87.95 108 126 131 4570851 WP85 11/16” x 1-3/4” Bottom $ 87.95 4570860 WP86 11/16” x 1-5/8” Top $ 85.95 Order # Profile # Size Price 4570861 WP86 11/16” x 1-5/8” Bottom $ 85.95 4571050 WP105 3/4” x 3/4” $ 55.95 4570900 WP90 3/4” x 1-1/8” Single Cut $ 83.95 4570106 WP106 11/16” x 11/16” $ 69.95 4570920 WP92 3/4” x 7/8” Single Cut $ 79.95 4570107 WP107 5/8” x 5/8” $ 68.95 4570930 WP93 3/4” x 3/4” Single Cut $ 79.95 4570108 WP108 1/2” x 1/2” $ 68.95 4570960 WP96 5/8” x 3/4” Single Cut $ 76.95 4571260 WP126 1/2” x 3/4” $ 51.95 4571010 WP101 1/2” x 1/2” Single Cut $ 66.95 4571310 WP131 1/2” x 3/4” $ 53.95 Notched Cove Molding Standard Base Cap Moldings Very similar to the standard cove moldings we offer but modified with a notch both at Designed for use on the top the top and bottom of the pattern. Ideal when used in combination with other mold- edge of a standard flat ings for a “built-up” look. Finished size is 3/4” x 3-1/2”. baseboard to give it a more ornate look. It will also close the gap between an uneven wall and baseboard. They will also provide a 163 165 166 167 172 261 neat looking trim where brick or stucco meet wood Order # Size Price on exterior walls. 4579515-T 3/4” x 3-1/2” $ 94.95 Order # Profile # Size Price 4579515-B 3/4” x 3-1/2” $ 94.95 4571630 WP163 11/16” x 1-3/8” $ 66.95 4571650 WP165 11/16” x 1-3/8” $ 66.95 4571660 WP166 11/16” x 1-1/4” $ 66.95 4571670 WP167 11/16” x 1-1/8” $ 63.95 Please Note: 4571720 WP172 5/8” x 3/4” $ 58.95 Profiles shown are NOT to scale 4572610 WP261 5/8” x 7/8” $ 60.95

For additional knives,parts or technical service on current or older style Belsaw Planer/Molders... See our selection Visit the Belsaw Website at: of Rosette Knives www.belsaw.com on page 33

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 4

Belsaw Molding Knives Call for Prices Standard Panel Moldings Wainscot Cap Moldings Originally used on the rake of a building or around exterior window frames. Also commonly used to top off baseboard and panel wainscot. Mitered and snugged into the corners formed when a flat panel is recessed within a frame, this molding gives Commonly used to top off baseboard and panel the appearance of richly carved paneling. wainscot. Mitered and snugged into the corners 4579503 formed when a flat panel is recessed within a frame, 216 this molding gives the appearance of richly carved 4579523 paneling.

Order # Size Price 4579503 3/4” x 1-1/2” $ 88.95 4579523 3/4” x 1-3/4” $ 94.95 210 210 213 214 217 218 220 220

Wainscot Cap Moldings 209 Battens are symmetrical patterns that are often used to conceal the line where two parallel boards or 208 panels meet. 207 Similar to panel 224 strip/mullion cas- Order # Profile # Size Price ing moldings that 229 are applied over 4572070 WP207 11/16” x 2-1/2” $ 83.95 window treatments. 4572080 WP208 11/16” x 2-1/4” $ 79.95 228 4572090 WP209 11/16” x 2” $ 76.95 4572100 WP210 11/16” x 1-5/8” $ 73.95 Order # Profile # Size Price 4572120 WP212 11/16” x 2-1/2” $ 83.95 4572240 WP224 9/16” x 2-1/4” $ 76.95 4572130 WP213 9/16” x 2” $ 76.95 4572280 WP228 11/16” x 2-1/8” $ 76.95 4572140 WP214 3/8” x 1” $ 66.95 4572290 WP229 11/16” x 1-5/8” $ 72.95 4572160 WP216 9/32” x 1-3/8” $ 78.95 4572170 WP217 11/16” x 1-3/4” $ 76.95 4572180 WP218 11/16” x 1-1/2” $ 74.95 Wainscot Molding 4572200 WP220 11/16” x 1-3/4” $ 76.95 Wainscot molding is very popular in remodeling projects or new construction because 4572220 WP222 11/16” x 1-1/2” $ 72.95 of the warmth it imparts to a room. After installation, cap off you new wainscot with your choice of cap moldings. Available in two different sizes to suit your needs. Wainscot & Plycap 290 291 292 294 4579509 Moldings These multipurpose moldings can be used in numerous ways. You 4579526 can use them to trim the upper edge or top of a wainscot or to cover the unsightly edges of ply- Order # Size Price wood. When attached to the edge 4579509 1/2” x 3-3/8” $ 110.95 of plywood, you can easily make beautiful shelving. 4579526 3/4” x 3-3/4” $ 114.95 Order # Profile # Size Price Standard Shelf Edge / Screen Moldings 4572900 WP290 11/16” x 1-3/8” $ 56.95 4572910 WP291 9/16” x 1-3/8” $ 56.95 When used as a Shelf Edge, it gives a 4572920 WP292 9/16” x 1-3/8” $ 56.95 highly decorative edge to wooden shelves 140 or does a fine job of covering the exposed 4572940 WP294 11/16” x 1-3/8” $ 56.95 edges of plywood. Used as Screen Molding, it is intended to cover the tacks 142 or staples that hold in the screen material. 4579531 Note that #4579531 can be easily 144 See our selection trimmed down to reduce the thickness. Order # Profile # Size Price of Rosette Knives 4579531 3/4” x 3/4” $ 66.95 4571400 WP140 1/4” x 3/4” $ 49.95 4571420 WP142 1/4” x 3/4” $ 49.95 on page 33 4571440 WP144 1/4” x 3/4” $ 49.95

Please Note: Please Note: Profiles shown are NOT to scale Profiles shown are NOT to scale

Monday - Friday 5 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Call for Prices Belsaw Molding Knives Standard Base Moldings Casing Knives Very similar in shape to standard casing profiles, however these moldings are normal- These profiles provide a decorative trim around a doorway, window or other opening. ly larger. These designs serve either as trim for doors and windows or as baseboard Suitable for use both indoors and as an outside trim molding. Back relief knife rec- where walls and floors meet. Of all of the molding knives we manufacture, these are ommended (See Below). by far the most popular.

412 642

444 672

448 702

602 WP321 WP324 WP326 WP327 WP390 Order # Profile # Size Price 4574120 WP412 11/16” x 3-1/2” $ 72.95 WP301/306 WP315/316 WP331/332 WP341/346 WP351/356 WP361/366 WP381/386 WP371/376 4574440 WP444 11/16” x 3-1/2” $ 88.95 Order # Profile # Size Price 4574480 WP448 11/16” x 3-1/2” $ 77.95 4573010 WP301 11/16” x 2-1/2” $ 84.95 4576020 WP602 11/16” x 3-1/2” $ 77.95 4573060 WP306 11/16” x 2-1/4” $ 80.95 4576420 WP642 11/16” x 3-1/2” $ 77.95 4573150 WP315 11/16” x 2-1/2” $ 83.95 4576720 WP672 11/16” x 3-1/2” $ 77.95 4573160 WP316 11/16” x 2-1/4” $ 80.95 4577020 WP702 5/8” x 3-1/2” $ 77.95 4573210 WP321 11/16” x 2-1/4” $ 80.95 4573240 WP324 11/16” x 2-1/4” $ 80.95 Standard & Antique Chair Rail Moldings 4573260 WP326 11/16” x 2-1/4” $ 80.95 4573270 WP327 11/16” x 2-1/4” $ 80.95 Chair rail moldings have become extremely popular over the years for use in new construction or renovation. These are usually applied one third the distance 4573310 WP331 11/16” x 2-1/2” $ 87.95 between the floor and a ceiling of a room and encircle the perimeter. These mold- 4573320 WP332 11/16” x 2-1/4” $ 85.95 ings provide a beautiful accent for nearly any room. 4573410 WP341 5/8” x 2-1/2” $ 87.95 4573460 WP346 5/8” x 2-1/4” $ 85.95 4573510 WP351 11/16” x 2-1/2” $ 87.95 4573560 WP356 11/16” x 2-1/4” $ 85.95 4573610 WP361 11/16” x 2-1/2” $ 87.95 4573660 WP366 11/16” x 2-1/4” $ 85.95 297 390 298 303 304 4573710 WP371 11/16” x 2-1/2” $ 87.95 4579528 4579524 4579501 4573760 WP376 11/16” x 2-1/4” $ 85.95 4573810 WP381 11/16” x 2-1/2” $ 87.95 4573860 WP386 11/16” x 2-1/4” $ 85.95 4573900 WP390 11/16” x 2-5/8” $ 87.95

Back Relief Knife Sets Order # Profile Size Price By putting a back relief on a molding pattern such 4570297 WP297 11/16” x 3” $ 88.95 as a base molding, you will limit the contact that 4570298 WP298 11/16” x 2-1/2” $ 88.95 the pattern makes against a wall providing a bet- 4570303 WP303 9/16” x 2-1/2” $ 88.95 ter fit. Almost a necessity when butting moldings 4570304 WP304 1/2” x 2-1/4” $ 88.95 up against lath and plaster walls. Packaged in 4573900 WP390 11/16” x 2-5/8” $ 87.95 sets of 3 knives that are used with the standard planer knife gibs. 4579528 3/4” x 3” $ 99.95 4579524 3/4” x 2-5/8” $ 104.95 #4575100 1” width ...... $ 17.95 4579501 3/4” x 2-1/2” $ 104.95 #4575125 1-1/4” width ...... $ 18.95 #4575150 1-1/2” width ...... $ 19.95 Custom Knife Information #4575175 1-3/4” width ...... $ 21.95 #4575200 2” width ...... $ 24.95 At The Belsaw Company, we can custom grind knives to your specifi- #4575225 2-1/4” width ...... $ 27.95 cations allowing you to design your own unique profiles or to match an #4575250 2-1/2” width ...... $ 31.95 existing pattern. Simply forward your wood sample (if available) or a #4575275 2-3/4” width ...... $ 33.95 sketch of your desired pattern and we will promptly furnish a quotation #4575300 3” width ...... $ 35.95 to complete the pattern. There is no charge for this service. After your order has been accepted, delivery time takes about 2-3 weeks. You will receive the pattern ground to your specifications, all steel and aluminum gibs, counterweights and installation instructions. Please Note: Profiles shown are NOT to scale

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 6

Call for Prices Belsaw Molding Knives Antique Base Moldings

4579416 4579405

#4579416 11/16” x 4-1/2”, Base molding ...... $ 97.95 #4579405 3/4” x 3”, Casing molding ...... $ 84.95 Antique Base Moldings - Variable Width These patterns will cut a decorative channel in your material. Therefore, you can 4579411 make your molding as wide as you want. 3-3/8”

#4579411 11/16” x 4”, Casing molding ...... $ 94.95

4579414 #457ANT-3 3/4” x Variable Width ...... $ 110.95 2-5/16” #4579414 5/8” x 4”, Base molding ...... $ 94.95

#457ANT-4 3/4” x Variable Width ...... $ 99.95 4579409 2-1/8” #4579409 5/8” x 3-1/2”, Base molding ...... $ 88.95

#457ANT-1 3/4” x Variable Width ...... $ 99.95 4579412 3-3/4”

#4579412 3/4” x 3-1/2”, Casing molding ...... $ 88.95

#457ANT-2 3/4” x Variable Width ...... $ 110.95 4579410 2-5/16”

#4579410 5/8” x 3-1/2”, Base molding ...... $ 88.95

4579408 #4579506 3/4” x Variable Width ...... $ 94.95

2-1/8” #4579408 11/16” x 3-1/4”, Base molding ...... $ 77.95

4579417 #4579512 3/4” x Variable Width ...... $ 94.95

#4579417 3/4” x 3”, Casing molding ...... $ 84.95 2-1/2”

4579403

#4579403 7/16” x 3”, Base molding ...... $ 84.95 Please Note: Profiles shown are NOT to scale #4579529 3/4” x Variable Width ...... $ 99.95

Monday - Friday 7 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Call for Prices Belsaw Molding Knives Modified Casing & Base Moldings Antique Moldings - Variable Width Casing Patterns Many of our customers have requested that we expand our casing and base molding This profile was designed to compliment the decorative plinth or rosette blocks selection with larger and/or smaller versions of existing standard profiles. Generally around doorways and windows. This pattern will cut a decorative channel in your used as trim for doors, windows and baseboards. Many older homes used these material. Therefore, you can make your molding as wide as you want. moldings around double hung windows, and to trim wood framed doorways between Many of our customers have requested that we offer a line of antique profiles often homes. found in homes constructed in the latter half of the nineteenth century. All of the profiles shown here were commonly used. We will continue to expand our selection of antique patterns in the coming years as their popularity dictates.

3-5/8”

#457BS-2 3/4” x 5-1/4” ...... $ 108.95 4579516

#4579516 3-5/8” x Variable width ...... $ 107.95

3-3/8” #4577040 3/4” x 5” ...... $ 96.95

4579517

#4579517 3-3/8” x Variable width ...... $ 104.95 #457BS-4 5/8” x 4-1/4” ...... $ 95.95 3-7/8”

4579508

#457CS-1 11/16” x 2-1/2” ...... $ 73.95 #4579508 3-7/8” x Variable width ...... $ 110.95

2-1/4”

457074C #457BS-1 3/4” x 3” ...... $ 83.95

#457074C 2-1/4” x Variable width ...... $ 94.95

2-1/2”

#457BS-3 3/4” x 3” ...... $ 83.95 457076C

#457076C 2-1/2” x Variable width ...... $ 94.95 #457BS-5 3/8” x 3-1/4” ...... $ 75.95 See our selection of Rosette Knives on page 33

Please Note: #4574450 3/4” x 3-1/4” ...... $ 88.95 Profiles shown are NOT to scale

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 8

Call for Prices Belsaw Molding Knives Antique Batten & Panel Moldings Many of our customers have requested that we offer a line of antique profiles often found in homes constructed in the latter half of the nineteenth century. All of the 4579413 profiles shown here were commonly used. We will continue to expand our selection of antique patterns in the coming years as their popularity dictates. Batten and panel moldings are very versatile since they can be used in a number of different applications. Use them as a decorative chair rail, as a cap for wainscot, #4579413 3/4” x 3-1/2” Beaded casing molding ...... $ 88.95 door and window trim, or to cover the seam on paneled walls.

4579527 4579525

#4579527 3/4” x 5”, Antique casing molding ...... $ 122.95 #4579525 3/4” x 3-1/4”, Antique Batten molding ...... $ 104.95

4570BAT-3

4579502

#4570BAT-3 3/4” x 4-3/8”, Batten molding ...... $ 102.95

#4579502 3/4” x 3-1/4”, Panel molding ...... $ 102.95

4570BAT-2

4579513 #4570BAT-2 3/4” x 4”, 5-Flute molding ...... $ 110.95

#4579513 3/4” x 3-1/4”, Casing molding ...... $ 102.95

457ANT-6

4579500 #457ANT-6 3/4” x 4”, Antique pattern molding ...... $ 104.95

#4579500 3/4” x 3-1/4”, Beading molding ...... $ 102.95

4579532

#4579532 3/4” x 4”, Casing pattern ...... $ 94.95 457ANT-5

#457ANT-5 3/4” x 3-1/4”, Antique molding ...... $ 94.95 4570BAT-1

#4570BAT-1 3/4” x 4”, Batten molding ...... $110.95 4579505

#4579505 3/4” x 3-1/4”, Batten molding ...... $ 99.95 4579504

4579511 #4579504 3/4” x 3-1/2” Antique casing molding ...... $ 104.95

Please Note: #4579511 1/2” x 2-3/4”, Beaded panel molding ...... $ 99.95 Profiles shown are NOT to scale

Monday - Friday 9 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Call for PricesBelsaw Molding Knives Modified Casing & Base Moldings

4570MUL-2 4570MUL-1

#4570MUL-2 11/16” x 2-3/4”, Mullion molding ...... $ 102.95 #4570MUL-1 5/8” x 2-1/2”, Batten molding ...... $ 99.95

4579510 11/16” x 1-1/2” 1/2” x 1-1/2”

#4579510 3/4” x 2-1/2”, Panel molding ...... $ 99.95 #4579518 $ 72.95 #4579430 $ 72.95

#4579415 3/4” x 2-1/2” ...... $ 73.95 #4579407 3/4” x 2-1/4” . . . . $ 63.95 #4579428 3/4” x 2-1/8” ...... $ 77.95

#4579404 3/4” x 2-9/16” ...... $ 73.95 #4579429 3/4” x 1-1/2” . . . . $ 72.95 #4579418 3/4” x 2-9/16” ...... $ 73.95

#4579402 11/16” x 2-7/16” . . . . . $ 73.95 #4579401 11/16” x 2” ...... $ 66.95 #457CS-2 3/4” x 2-3/8” ...... $ 73.95

Standard Astragal Molding Round Over Knives This very versatile molding is often used as a These double cut knives produce two different radii. Great for cutting slats for out- door stop, or to cover the seam where panels door furniture projects. are jointed together.

#4579980 WP998 (11/16” x 1-3/4”) ...... $ 58.95 1/8” & 5/32” 1/4” & 3/16” Radius Knife Radius Knife #4579520 Brick Molding #4579521

A thick molding providing a surface for Set of three knives will produce a brick or other siding to butt against. 5/16” & 3/8” total of 6 different radii. Order by This design allows a brick molding up to Radius Knife part number 457RAD-SET 2” wide x 1-1/4” thick to be produced. #4579522

Order # Dimensions Price #4579520 1/8” & 5/32” Radius knife ...... $ 62.95 4571800 2” x 1-1/4” $ 72.95 #4579521 1/4” & 3/16” Radius knife ...... $ 62.95 #4579522 5/16” & 3/8” Radius knife ...... $ 62.95 Please Note: #457RAD-SET 3-Piece Radius knife set ...... $ 165.95 Profiles shown are NOT to scale

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 10

Call for Prices Belsaw Molding Knives

Standard Picture Moldings Decorative Hand Rail Moldings This profile is used to support hooks for picture 273 276 4570HR-4 frames. Installed around the perimeter of a room approximately 1-1/2” below the ceiling line. 4570HR-1

4570HR-3

Order # Profile # Size Price 4570273 WP273 11/16” x 1-3/4” $ 92.95 4570276 WP276 11/16” x 1-3/4” $ 92.95 4570HR-2

Half Round / Dowel Moldings This half circle molding profile is often used as a screen molding, bead molding, shelf edging or a panel molding. By running the half molding twice through your planer/molder, you will also be able to create full round In a colonial style home, the staircase was very often the focal point of the dwelling. dowels in the most popular sizes. Master craftsmen took great pride in their ability to construct beautiful wooden stair cases. The decorative handrail was meant to compliment the ornate newel posts Order # Diameter Cut Qty Price and spindles. 4574012 1/2” 2-up $ 53.95 4574022 5/8” 2-up $ 53.95 Order # Size Price 4574032 3/4” 2-up $ 57.95 4570HR-1 4-3/16” x 3” $ 155.95 4574042 7/8” 2-up $ 59.95 4570HR-2 2-1/2” x 2-1/4” $ 133.95 4570HR-3 3” x 2-1/4” $ 138.95 4574152 1 ” 2-up $ 59.95 4570HR-4 2-3/4” x 2-1/2” $ 138.95 4574052 1-3/8” 2-up $ 66.95 4574062 1-1/2” 2-up $ 66.95 Log Cabin Siding Molding Louver Molding Many of our customers are making wooden shutters for high-end homes built in the southern Exposure states. This new pattern will allow you to accurately produce wooden slats so you can make your own. The top knife cuts the profile, and the bottom knife will cut a groove channel to be used as your lower guide for milling. Finished slat size measures 5/8” x 2-1/2”. Add a rustic look to your building projects with our log cabin siding knife. Available Order # Profile Price in either 5” or 6” exposure. You determine the thickness. 4579514-T Top Knife $ 75.95 4579514-P Bottom Knife $ 75.95 Order # Exposure Price 4579514-S 2-Piece Set $ 133.95 457LC-5 5” $ 155.95 457LC-6 6” $ 166.95

Tear Drop Siding Molding Bar Rail Molding This popular pattern is similar to standard clap board siding but adds a decorative element through the gentle rounding of the overlap. This siding can be simply butted together, or you could add a rabbet to one edge of a true overlap. Also very popular when used in family rooms and dens when milled from knotty pine.

#4579406 3/4” x 5” Dimension ...... $ 99.95 Perfect for the rec room and other wet bar applications. Gentle sweeping curves with a unique detail makes this a very popular profile. Sold as a two knife set. Order # Exposure Price 457BR-1 2” x 5-1/2” $ 164.95 Please Note: Profiles shown are NOT to scale

11 Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Call for Prices Belsaw Molding Knives Rabbet Knife Sets Wedge Tongue & Groove Rabbet Knives are 1” wide. You specify depth of Molding cut. Ask for additional depth of cut rabbet knives. A very versatile profile for making flooring and #4575502 1” x 1/4” ...... $ 25.95 paneling. Available in two different thickness #4575505 1” x 3/8” ...... $ 25.95 capacities. #4575506 1” x 7/16” ...... $ 33.95 #4575507 1” x 1/2” ...... $ 25.95 #4575391 For 5/8” to 1” stock ...... $ 99.95 #4575508 1” x 5/8” ...... $ 33.95 #4575389 For 2” stock ...... $ 110.95 #4575510 1” x 3/4” ...... $ 25.95 #4575390 For 2” stock with V-Groove ...... $ 133.95

V-Groove Bead Molding Paneling Tongue & Use this pattern to add a decorative V-Groove bead Groove Molding to your moldings. Available in single and double bead configurations. Bead measured 1/4” across, A very popular molding for wall and ceiling depth of cut is 1/4” and there is a 1/16” spacing paneling. This knife produces paneling from between beads on double cut profile. 5/8” to 1” thick. Widths can be varied according to your needs. #457VB-1 Single Bead ...... $ 54.95 #457VB-2 Double Bead ...... $ 65.95 #4575388 Paneling Tongue & Groove ...... $ 99.95

Picture Frame Moldings Picture frame moldings have increased in popularity over the years and our pattern selection is one of the best available. These can be used in many different configurations and combinations to develop a very unique finished product. If you would like us to manufacture a pattern to your unique specifications, please don’t hesitate to contact us for a free quotation. Please note the finished dimensions below. Art not shown to scale.

#4574200 #4574201 #4574202 #4574203 #4574204 #4574205 #4574206 #4574207 1-1/2” x 7/8” 1-1/8” x 7/8” 2” x 7/8” 7/8” x 7/8” 1-1/4” x 3/4” 1-1/8” x 3/4” 1-1/8” x 3/4” 2” x 3/4” $ 59.95 $ 59.95 $ 69.95 $ 59.95 $ 62.95 $ 62.95 $ 62.95 $ 69.95

2-1/8” x 7/8” Top & Bottom knife dimensions

#4574208 #4574209 Top #4574215 #4574211 #4574212 #4574213 #4574214 1-1/2” x 7/8” #4574210 Bottom 7/16” x 1/2” 2-3/8” x 3/4” 1-1/16” x 1-1/4” 1-1/16” x 15/16” 1-5/16” x 3/4” $ 66.95 $ 69.95 each $ 62.95 $ 73.95 $ 62.95 $ 65.95 $ 65.95

#4574216 #4574217 #4574218 #4574219 #4574221 1-1/16” x 1-3/8” 3-9/16” x 1-1/8” 1” x 1/2” 2-1/8” x 1-1/4” 7/8” x 1-13/16” $ 62.95 $ 88.95 $ 62.95 $ 69.95 $ 68.95

#4574222 #4574226 #4574220 #4574224 #4574225 #4574223 3/4” x 1-5/8” 7/8” x 1-1/2” 1” x 2” 1-1/8” x 1-7/16” 7/8” x 1-1/4” 7/8” x 1-7/8” $ 68.95 $ 68.95 $ 69.95 $ 68.95 $ 68.95 $ 68.95 Please Note: Profiles shown are NOT to scale Please Note: Profiles shown are NOT to scale

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 12 Planer / Molders Williams & Hussey Molding Profiles Williams & Hussey Planer / Molder Package W&H supplies just about any • Produces Restoration Moldings, molding knives you need. Need Straight Moldings, Round Top Moldings, special knives? Just send us an Elliptical Moldings (with optional jig), accurate tracing or a sample of Casings, Crowns, Base Caps, Chair Rails, the molding you wish to duplicate Astragals, Raised Panels , and more! –they will be ground for you! • 2 knife cutterhead (Two knives per profile) • 2 HP, 1 phase, 110/220V motor • Feed rate: 15 FPM • Planes 7” wide • 8” max stock thickness 5/8” Beaded Casing • 9” min stock length 3/4”x2-1/2” Bed & Cove • Weight: 220 lbs. • This package includes 2HP motor, 3/4”x3-1/4” Crown Molding 5/8”x2” welded steel stand with support rollers Window/Door 3/8”x1-1/4” Roughing and casters, dust hood with 4” outlet Stop and switch. 5/8” Raised Panel 3/4”x4-1/4” Casing

5/8” Multi-Bead Casing #W&H-PK $ 1,968.00 1-1/8” Backout

Casing Knives

1/2” Knotty Pine Paneling 11/16”x1-1/8” Base Cap

Optional Elliptical Jig 3/4” Raised Panel Maximum profile width 6-1/2” 11/16”x2-1/2” Casing #EJ92 ...... $ 587.00 Optional Accessories #54-304 Oak table guides ...... $ 21.00 3/4”x3-1/2” Crown Mold #54-41 Replacement planer knife set ...... $ 93.00 7/16” Beading

Jet 13”Closed Stand Planer / Molder Shop Fox Planer / Molder

• 3 knife cutterhead • 2 HP, 1 phase, 220V motor • 1-1/2 HP, 1 phase, • Cutterhead Speed: 7,000 R.P.M. 115/230V motor • Feed Rate: 15 F.P.M. • Feed rate - planing: 20 FPM • Maximum Planing Width: 7" • Feed rate - molding: 10 FPM • Maximum Profile Width: 6-3/4” • 6-1/8” max planing thickness • Maximum profile depth: 3/4” • 14” min planing length • Minimum stock length: 9” • Weight: 269 lbs. • Minimum stock thickness: 1/4” Over 40 standard molding cutter • Maximum stock thickness: 8” sets are available. Custom made • Height of bed: 31” cutter sets are also avail- • Approx. Shipping weight: 200 lbs. able for a wide variety of applications. #W1693 $ 1,150.00 #JPM-13CS Optional Accessories $ 969.00 Optional Accessories: #JPM13-K Set of 3 HSS 13” repl knives . . . . . $ 91.00 #D3350 Set of 2 HSS 7” replacement knives ...... $ 69.95

Monday - Friday 13 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Fox® Molding Knives Shop Fox Molding Knives These High Speed Steel molding knives fit the W1693 Shop Fox Mini Molder/Planer. Each molding profile includes a set of two indexable knives, so knife setting is quick and easy. Profiles shown are not to scale.

wn ro C

wn 4-5/8” ro C wn ro 4-1/4” C wn ro C

3-5/8” wn ro 3-1/4” C wn ro C 2-3/4”

2-1/4”

#D3338 #D3337 #D3336 #D3335 #D3334 #D3333 $ 89.95 $ 89.95 $ 79.95 $ 59.95 $ 59.95 $ 49.95

d ve ea o B C

1-3/4” 1-3/4” ail #D3324 #D3325 ail

$ 39.95 $ 39.95 ail ase ase ase B B B hair R hair R C C hair R C 4-1/4” 3-1/4” 3-1/4” 3” 2-5/8” 2”Casing 2-1/2” #D3326 $ 59.95

2-1/4”Casing #D3339 #D3340 #D3341 #D3327 $ 69.95 $ 69.95 $ 79.95 #D3344 $ 59.95 #D3342 #D3343 $ 79.95 $ 59.95 $ 79.95

3-1/4”Casing #D3332 2”Back Cutter $ 29.95 #D3328 $ 79.95 #D3331 1-1/2”Back Cutter $ 19.95

3-1/2”Casing #D3330 1-1/8”Back Cutter $ 19.95 #D3329 $ 89.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 14

Table Saws & Accessories

Shop Fox 10”Table Saw Tenoning Attachments These jigs give you more adjustments to simplify cutting tenons and • 52” Shop Fox Classic other wood joints on your table saw. T-Fence Handles stock up to 3-1/4” thick. • LEFT-TILT blade Miter slot bar is adjustable to • One cast iron wing ensure a secure table slot fit; • Includes extension keyed design prevents jig table with legs, standard from tipping over or falling and dado table inserts from table. • Weight: 600 lbs. #34-183 Delta tenoning attachment ...... $ 109.95 #JTG-10 Jet tenoning attachment ...... $ 123.95 #6284600 Powermatic tenoning attachment . . . $ 124.00 3 HP, 1 phase, 220V motor • #W1677EXT1 $ 1,350.00 #50-050 General tenoning attachment ...... $ 99.00

5 HP, 1 phase, 220V motor • #W1711EXT $ 1,499.00 Right Angle Jig This amazingly affordable jig is constructed using top quality aluminum castings and plates which are machined Incra Miter Gauge to exacting tolerances. Cut tenons, dados, rail ends, and finger joints safely The NEW Incra Miter V27 is engi- and with complete accuracy. neered to provide a high performance, yet low cost upgrade for your #W1500 ...... $ 169.95 Table Saw, Band Saw, Router #W1301 Optional (shown) 6” vise clamps ...... $ 12.95 Table, Disk Sander, Belt Sander or any other tool in need of a better miter gauge. Like all Incra Miter Wood Feather Board Gauges, the V27 delivers extreme miter cutting accuracy through the This wood feather board will keep your stock advanced combination of Incra’s exclusive AngleLOCK™ indexing system tight against the rip fence and down on the and its patented Adjustable GlideLOCK™ Miter Bar. Now, the Incra Miter table during ripping operations giving you more V27 makes it possible to put an Incra Miter Gauge in EVERY miter chan- control. Will fit in standard 3/4" wide miter nel in your shop! slots. #MITERV27 ...... $ 54.95 #D3096 ...... $ 11.95

Push Stick Plastic Feather Board This essential safety item keeps hands a safe distance Our plastic featherboard keeps stock up against the from blades and cutters while still maintaining control of the workpiece fence on table saws, shapers, router tables, etc. against machine fences. Measures 13-1/2” overall. Fits in standard miter slots.

#D3122 Push Stick ...... $ 8.95 #825-1450 ...... $ 8.65 Of course it works like (1) a safety push 9-in-1 Saw Aid stick, with a long, narrow hold-down surface. But this tool also works as: (2) a Shop Fox 10”Table Saw table saw depth gauge, (3) router depth gauge, (4) 6” hook rule, (5) 30º/ 60º • 26” Shop Fox Classic angle gauge, (6) 45° angle gauge, (7) 9” T-Fence rule, (8) 90º engineers square, (9) cen- • LEFT-TILT blade ter finder. The depth gauges and center • Two cast iron wings finder are accurate to .005”; engineers • Includes standard and square is accurate to .01”. Heavy-duty, dado table inserts glass-filled-nylon tool is guaranteed for 5 • Weight: 552 lbs. years against breakage! Shown with D2057 #19107 9 in 1 Saw Aid ...... $ 15.95 Adjustable Mobile Base. (Not Included) Safe “V”Shoe Unique because of a bottom groove that applies pressure down and in 3 HP, 1 phase, 220V motor • #W1677 $ 1,149.00 towards the fence. Made from high density plastic. Sold per pair. 5 HP, 1 phase, 220V motor • #W1711 $ 1,250.00 #825-1100 ...... $ 3.45

Monday - Friday 15 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Table Saws & Accessories

Shop Fox 10”Table Saw Clamping Miter Gauge This Clamping Miter Gauge is safer than standard miter gauges. It has • 3 HP, 1 phase, a comfortable D-handle grip, built- 220V motor in sliding stop, and positive trigger • 50” Standard Shop clamping action. It fits standard Fox Fence miter gauge slots, 3/8” x 3/4”, • LEFT-TILT blade with positive angle stops at 90° and 45° both left and right • One cast iron wing side. Bar extends to 12” • Includes extension #W1323 ...... $ 39.95 table with legs, standard and dado table inserts • Weight: 600 lbs. Jointr’ Clamp Here is a simple, inexpensive solution #W1677EXT2 for precisely putting a straight edge on $ 1,395.00 any warped or crooked stock, all in one pass on your table saw without using a jointer. Will also do shallow taper cuts Saw Step Gauge with superior control of the stock #D3119 $ 9.95 Make precision table saw cuts every time with this step gauge. Just place the step gauge over the saw blade and raise the blade Tapering Jig until it contact the height you choose. Cut tapers with ease when using this jig on #19082 ...... $ 6.95 your table saw, bandsaw or radial arm saw. Converts to left or right hand use and is adjustable up to a 15° taper. Very easy to use Saw Setting Gauge and constructed from aluminum. The beauty of this gauge is that it is a full #825-1150 ...... $ 20.40 3/4” thick ensuring that the teeth are being gauged at the top of the arc, and it can stand on its own. Will precisely set any height or Anti-Kickback Mechanism with from 1/8” to 2” in 1/8” increments. These safety colored yellow rollers rotate clock- #860-6010 ...... $ 38.00 wise for table saws and prevent dangerous kickback. Also maintain even pressure against the saw table and fence so that ripping long boards is a very easy operation. If you work Zero Clearance Table Saw Inserts alone, this table saw accessory will really speed The Zero Clearance concept is simple; the up your ripping operations while providing a blade cuts its own perfectly sized slot by higher degree of safety for the operator. being raised through a machinable Optional track makes adjustments a breeze. Sold in pairs. “blank”insert. Inserts are 1/2” thick high- #W1104 ...... $ 36.95 density phenolic laminate, with bonded laminate surface-offering superior rigidity, flatness, durability, and low friction. User friendly features include top-accessible lev- Freud 10”Sanding / Calibration Disc eling screws, lateral adjustment screws for a vibration free fit, rear anti-lift pin • These Calibration and Sanding Discs (except JT-1) and a precut blade pocket on bottom that provides clearance for are a real time saver for aligning your fully retracted blades and bevel cuts. Instructions included. Use only carbide saw. tipped blades. Colors may vary. • Precision machined for absolute balance and flatness #DL-1U Delta Universal 13-3/8” x 3-3/4” ...... $ 21.95 • Mount these in place of your blade #JT-164 Jet/Powermatic Cont R&L Tilt 12-1/2”x3-9/16” . . . $ 21.95 and use the flat surfaces to accurately #JT-2L Jet XACTA Left Tilt 13-5/16” x 3-11/16” ...... $ 22.95 align your saw for the best cut #PM-1 Powermatic 66 14-7/16” x 4” ...... $ 21.95 • Apply our self-adhesive sanding disks #GE-1 General 350 13-13/16” x 3-1/2” ...... $ 21.95 and turn your table or radial arm saw #CR-1 Craftsman Saws 14” x 3-3/4” ...... $ 21.95 into a disc sander #BK-1 Universal Blank Sheet 1/2”x11”x15” ...... $ 21.95 • Use on table saw or radial arm saws • Measures 10” x 1/8” x 5/8” arbor

#CD010 10” Sanding / Calibration Disc ...... $ 38.00 #D10080 5pk 80 Grit self-stick discs ...... $ 24.00 #D10120 5pk 120 Grit self-stick discs ...... $ 22.40 #D10150 5pk 150 Grit self-stick discs ...... $ 22.40 #D10XXX Asst pack, 5ea) 80, 120, 150 grit discs ...... $ 49.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 16

Table Saws & Accessories

Link Belt Shop Fox 10”Contractor-Style Table Saw Designed to reduce vibration between the motor and arbor, these belts are sectional- ized so you can quickly make any size belt. • 28” Shop Fox Aluma-Classic T-Fence This belt has the same cross section • 2 HP, 1 phase, 110/220V motor (prewired to dimension as standard V-belts and is equiv- 220V) alent to a model A/4L (1/2”) belt. • RIGHT-TILT blade Resistant to oil, chemicals and high tem- • Two cast iron wings peratures. • Built-in dust hood with 4” outlet #0418030 1/2” x 5’ Link Belt ...... $ 39.95 • Includes standard and #0418130 1/2” x 4’ Link Belt ...... $ 31.95 dado table inserts • Weight: 310 lbs. Glide Tape Self-lubricating tape easily applies to fences, jigs, any machine surface. This special UHMW adhe- #W1714 $ 699.00 sive backed flexible plastic film has low friction qualities and a high abrasion resistance. #19420 3/4” width x 6’ length ...... $ 4.95 TopSaver Rust Removal and Top Protectant Kit #19425 2” width x 6’ length ...... $ 9.95 Finally, a rust removal kit that Really Works! It is a #19430 3” width x 6’ length ...... $ 12.95 Rust Remover/Lubricant/Surface Sealant/ Conditioner for metal surfaces. It completely Bostik Lubricant Sprays removes rust and corrosion from the pores of the metal surface. It reduces sliding friction, eliminates Use TopCote to seal table tops and to protect binding and surface hang-ups on tabletops, repels tools against corrosion. Also minimizes friction, moisture and seals the surface pores against is anticorrosive and dries rapidly. DriCote rust and corrosion. Includes 8 ounce reduces friction thereby lowering cutting temper- bottle of TopSaver, gloves, abrasive atures and prolonging tool life. Heat resistant to pads and wiping cloths. 550 degrees. Bearing Lube is especially effective on router bit bearings or to lubricate slides #TOPSAVER KIT ...... $ 19.99 and other height-load parts. #205801 10.75 oz TopCote ...... $ 13.95 #205805 5.5 oz TopCote ...... $ 9.95 Freud Thin Kerf Carbide Tipped Blades #204801 10.75 oz DriCote ...... $ 16.40 Freud's “Thin Kerf” carbide tipped blades combine all #204805 5.5 oz DriCote ...... $ 9.95 the top features of their Industrial blades to give you a #209405 5.5 oz Bearing Lube ...... $ 11.95 superior finished cut at an extremely affordable price. All these blades feature Freud's exclusive anti-kickback shoulder design for greater safety. The thin kerf requires less Shop Fox 10”Contractor-Style Table Saw cutting power both from you and the saw. Order number, blade diameter, bore and number of teeth are listed. Part No. Dia Bore Teeth Price • 28” Shop Fox Aluma-Classic T-Fence Ripping Blade • 1-1/2 HP, 1 phase, 110/220V motor TK206 10” 5/8” 24 Flat $ 28.95 • RIGHT-TILT blade Finishing Blade • Two stamped steel TK306 10” 5/8” 40 Flat $ 34.25 wings Fine Cutoff Blades • Built-in dust hood with TK406 10” 5/8” 60 Flat $ 41.60 4” outlet TK806 10” 5/8” 80 Flat $ 55.70 • Includes standard and General Purpose Combination Blade dado table inserts TK906 10” 5/8” 50 Flat $ 38.95 • Weight: 285 lbs.

Visit the Belsaw website at:

#W1703 $ 650.00 www.belsaw.com

Monday - Friday 17 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Mobile Bases

Shop Fox Mobile Bases General International Mobile Base Rated “Best Buy” by the popular woodworking magazines for its superior The SHOP FOX Adjustable stability, mobility and capacity for the price Mobile bases are the first mobile bases designed • Heavy duty steel strong enough to move • Strong 3" wheels - heavy machines on a con- two swivel and two fixed casters tinual basis, be adjustable • Each swivel caster has a foot pedal that to fit a variety of machines and raises and lowers the base with little effort be leveled without the use the of • Rubber leveling feet shims or tools. To move the machine, you • Adjustment in 1" increments reach down and simply turn the knobs on the two plungers counter-clock • 500 lbs. capacity wise to allow the weight of the machine to rest on the wheels, and then • Adjusts from 11" x 11" to 35" x 35" to fit most machines move the machine to the new location. To lock and level the machine, simply turn the plunger knobs clockwise until locked and level. 4 #50-025 ...... $ 49.00 Heavy-Duty 3" Industrial Grade Casters - 2 ball bearing swivel and 2 stationary. Engineered with heavy-duty steel (up to 1/4" thick) for excep- tional strength Delta Universal Mobile Base Mini Mobile Base With this set of brackets, you can custom make a mobile base exactly sized for your Adjusts from 10 -1/2" x 14 -1/2" to 17" x 21 -1/2" to fit most machines equipment. Simply cut hardwood rails (not A substantial 600 lb. capacity to easily handle most of the popular supplied) to fit in the corner brackets. machines. Three casters provide superior mobility and #D2260 Mini mobile base ...... $ 65.95 a locking foot pedal locks the base firmly in place. Will handle machinery up to 300 pounds. Heavy-Duty Mobile Base Sold per set to make up one mobile base.

Adjusts from 19" x 20 -1/2" to 29 -1/2" x 29 -1/2" to fit most machines #50-345 ...... $ 56.50 A substantial 700 lb. capacity to easily handle most of the popular machines. #D2057 Heavy-duty mobile base ...... $ 66.95 Jet Universal Mobile Base Super Heavy-Duty Mobile Base Can be configured to fit a wide range of machinery sizes with weights under 600 Adjusts from 18" x 24-1/2" to 28-1/2" x 33-1/2" to fit most machines A massive 1300 lb. capacity to handle some of the heaviest machines pounds. Two fixed and two swivel castors made. make for easy maneuverability. Exceedingly strong, very stable, yet light in weight with a #D2058 Super Heavy-duty mobile base ...... $ 85.00 unique spring pin design for quick snap adjustment. No tools are needed for assembly or to make size adjustments. Extension Kit for the D2260 and D2057 • Adjusts from 18" x 18" to 28" x 28" Mobile Bases • Quick snap adjustment -no tools needed • Castors lock in position This Kit easily bolts on to Models D2260 and #708118 Universal mobile base ...... $ 59.95 D2057 to provide support for an extension table or Jet Industrial-Duty Universal similar device. Makes the whole machine and exten- Mobile Base sion able to move as one Designed for larger and heavier machines. unit. Adjustable for length Features the quick snap feature so you (up to 44") as well as front don’t need any tools to set up or make size to back. adjustments. With just a 1/2” clearance, #D2259 Extension kit ...... $ 59.95 the center of gravity stays close to the floor. Also available are extension bars to extend the length of the mobile base for lathes and other machines with 36”Extension Bars for the D2058 Mobile Base long and narrow footprints. You can also attach the #708158 extension kit to the mobile base so the base will extend and fit under cabinet saws that These 36” extension bars replace the stan- have extended rails and tables up to 60” long. dard length side rails on the D2058 heavy- • Up to 1,200 lb. capacity duty mobile base. This allows the base to be • Adjusts from 24" x 24" to 34" x 34" assembled with a minimum capacity of • Quick snap adjustment 18”x34” to a maximum capacity of #708119 Industrial-duty mobile base ...... $ 79.95 33-1/2”x44”. #708110 18” Extension rail ...... $ 11.95 #708116 36” Extension rail ...... $ 16.95 #D2246 ...... $ 26.50 #708117 50” Extension rail ...... $ 19.95 Extension #708158 Extension Kit ...... $ 69.95 Bars

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 18

Magic Molder™ The Magic Molder Magic Molder Fence Convert your table saw into a molder! The Magic Molder Fence allows the user to expose a small portion of a plug without cutting • Ideal for making short runs and creating into their tables fence. Equipped with two brackets “custom” moldings on both natural and com- which will fit all fences except the Delta Unifence. posite materials The Magic Molder Fence also has four tapped • Unique design allows the universal head to screws which are designed to accommodate tem- be anti-kickback with any profile plates for arch-moldings. • Chip limiting design produces smooth, vibra- #MM-F $ 155.00 tion-free cuts • 7” diameter head with 5/8” diameter bore Magic Molder Plugs (sold per pair) Magic Molder Promotional Set Includes the following: • Magic molder head • Your choice of any ONE pair of magic molder plugs 1/4”R #PR-MM Head ...... $ 89.95 .5” .25” PLUS 1” One plug set ...... $ 95.00 = $ 184.95 / Set 45° (please specify) Magic Molder Starter Set #P1 $ 95.00 #P3 $ 95.00 #P10 $ 95.00 Includes the following: • Magic Molder head • P37 & P65 Magic Molder plug sets

5/16”R 3/8”R 1/8”R .188” .125” .375” 3/16”R 1/8”R .125” .063” .25” 1/8”R 1/4”R #STARTER-SET .313” .25” $ 269.95 #P11 $ 95.00 #P12 $ 95.00 #P13 $ 95.00 P37 P65

Magic Molder

Advanced Starter Set 3/16”R 1/4”R 5/16”R .313” Includes the following: .25” .188” • Magic Molder head • P37 & P65 plugs as above Starter Set, but also P58 & P64 Magic Molder plugs #P14 $ 95.00 #P15 $ 95.00 #P16 $ 95.00

P37 5/8”R .625” 3/8”R 7/16”R 1/2”R .104” 3/4”R 3/8”R 3/16”R .125” .25” .375” P64 P58 P65 #P17 $ 95.00 #P18 $ 95.00 #P19 $ 95.00 #ADV-STARTER-SET $ 469.95

Monday - Friday 19 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Magic Molder™ Magic Molder Plugs - continued (sold per pair) 3/4”wide material

1/2”R 1/8”R 3/32”R 3/16”R .643” .713” .062” .062” .375” .313” .406” 1/8”R 3/16”R

#P20 $ 95.00 #P20-3/16 $ 95.00 #P21 $ 95.00 #P43 $ 95.00 #P45 $ 95.00 #P46 $ 95.00

1/2”wide material

.5” 1/4”R 5/16”R 5/16”R 9/16”R .891” 1/8”R .25” .188” .187” .187” .076” 11/16”R 5/16”R 5/16”R 7/32”R .375”

#P22 $ 95.00 #P23 $ 95.00 #P28 $ 95.00 #P48 $ 95.00 #P57 $ 95.00 #P59 $ 95.00

3/8”R .5” .5” .658” .891” 7/32”R 5/32”R 5/32”R 7/16”R 5/32”R 7/16”R .143” 5/32”R 3/8”R 3/8”R 1/2”R 1/2”R 3/16”R

#P29 $ 95.00 #P31 $ 95.00 #P32 $ 95.00 #P60 $ 95.00 #P62 $ 95.00 #P63 $ 95.00

.843” .75” .312” 5/32”R .658” .656” 9/64”R 3/16”R .094” .422” 1/8”R .281” .125” .125” .125” .063” 9/64”R 1/8”R 7/32”R 7/32”R 9/64”R 3/16”R 1/4”R 45° 7/32”R

#P34 $ 95.00 #P35 $ 95.00 #P37 $ 95.00 #P66 $ 95.00 #P67 $ 95.00 #P68 $ 95.00

1/4”R .565” .343” .78” .094” .765” .125” .063” 3/4”R 3/32”R 1/8”R 3/32”R 1/8”R 3/16”R 7/64”R 7/64”R 45° 3/16”R .156” .156”

#P38 $ 95.00 #P40 $ 95.00 #P42 $ 95.00 #P69 $ 95.00 #P70 $ 95.00

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 20

Band Saws & Accessories Band Saw Blades Shop Fox 14”Band Saw Flex back premium band saw blades. 93-1/2” length fits all 14” Delta and Rockwell models, 14” Jet, and most other 14” models WITHOUT height attachment. 105” length fits all 14” Delta and Rockwell models, • 1 HP, 1 phase, 110/220V motor 14” Jet, and most other 14” models WITH height attachment. • 6” height capacity Part Teeth • 1/8” to 3/4” blade width No. Width Per Inch Length Style Mfg Price • 93-1/2” blade length #FB08593 1/8” 14 93-1/2” Reg Olson $ 14.95 • 4” dust port #FB10493 3/16” 4 93-1/2” Skip Olson $ 11.95 • Blade speeds: 1,500 & 3,200 FPM #FB10093 3/16” 10 93-1/2” Reg Olson $ 11.95 • Includes miter gauge and rip fence for #FB14393 1/4” 4 93-1/2” Skip Olson $ 11.95 resawing and ripping #FB14593 1/4” 6 93-1/2” Skip Olson $ 11.95 • Weight: 256 lbs #FB14793 1/4” 10 93-1/2” Reg Olson $ 11.95 #FB14893 1/4” 14 93-1/2” Reg Olson $ 11.95 #FB19293 3/8” 4 93-1/2” Skip Olson $ 11.95 #FB19493 3/8” 6 93-1/2” Hook Olson $ 11.95 #FB19693 3/8” 10 93-1/2” Reg Olson $ 11.95 #FB23093 1/2” 3 93-1/2” Skip Olson $ 11.95 #W1706 $ 590.00 #FB23493 1/2” 6 93-1/2” Hook Olson $ 11.95 #FB23693 1/2” 10 93-1/2” Reg Olson $ 11.95 Optional Accessories: #FB23793 1/2” 14 93-1/2” Reg Olson $ 11.95 #TK26393 3/4” 3 93-1/2” Hook Olson $ 17.95 #D3348 Riser block, increases to 12” under the guide. #FB10405 3/16” 4 105” Skip Olson $ 12.95 Must use 105” blades ...... $ 79.95 #FB14305 1/4” 4 105” Skip Olson $ 11.95 #FB14805DB 1/4” 14 105” Reg Olson $ 11.75 #FB19205 3/8” 4 105” Skip Olson $ 12.95 #FB19405 3/8” 6 105” Hook Olson $ 12.25 Circle Cutting Attachment #FB23005 1/2” 3 105” Skip Olson $ 12.95 #FB23405DB 1/2” 6 105” Hook Olson $ 12.50 Attaches to most band saws with 3/8” x 3/4” #FB23605 1/2” 10 105” Reg Olson $ 13.95 miter grooves to provide professional circle cut- #TK26305 3/4” 3 105” Hook Olson $ 18.95 ting capability. Cut perfect circles from 3” to 50” in diameter. Features all-metal construction, sturdy support leg, and extension wings for extra support of large diameter circles. Shop Fox 17”Band Saw #28-197 Circle cutting attachment ...... $ 99.50

• 2 HP, 1 phase, 220V motor Shop Fox 4”x 6”3-Speed • 12” height capacity • 1/8” to 1” blade width Horizontal Band Saw • 132” blade length • 3/4 HP, 1 phase, 110V • Two 4” dust ports motor • Blade speeds: 1,600 & 3,300 FPM • Round capacity @ 90°: • Includes miter gauge and rip fence for 4-1/2” resawing and ripping • Rectangular capacity @ • Weight: 409 lbs 90°: 4” x 6” • Blade speeds: 78, 108 and 180 FPM • Blade size: 64-1/2” • Automatic shutoff after #W1707 $ 999.00 cut • Includes vertical cut- * Call for our selection of blades for this machine ting attachment • Weight: 139 lbs. Magnetic Work Light Illuminate your work! The powerful magnetic base adheres to any steel surface providing extra light in hard- #W1715 $ 229.00 to-reach work areas. Features include a flexible 14” arm Optional Accessories: and an extra-long 8’ cord. Uses up to a 50-watt track light bulb (not included). #HB71764 1/2” x 64-1/2” 14 tooth blade . . . . . $ 12.25 #HB71864 1/2” x 64-1/2” 18 tooth blade . . . . . $ 12.25 #25-869 Magnetic work light ...... $ 20.10

Monday - Friday 21 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shapers • Scroll Saw

Shop Fox 3 HP Shaper Shop Fox 16”VS Scroll Saw

• 1/8 HP, 1 phase, 110V motor • 3 HP, 1 phase, 220V motor • Variable speed: 550 to • Reversing 1,700 strokes per minute • 2 spindle speeds: 7,000 & • 16” throat capacity 10,000 RPM • 2” maximum working • 1/2”, 3/4” & 1” interchangeable thickness spindles • 3/4” stroke length • 3” spindle travel • Tilting table • 30-1/2” x 28-1/4” table • Includes gooseneck • Miter slot work light, dust blower • 3” dust chute outlet and dust port • Includes miter gauge • Weight: 31 lbs. • Weight: 353 lbs.

#W1713 $ 150.00 #W1702 $ 1,099.00 * Call for our selection of blades for this machine

Hold-Down Device These Board Buddies Shop Fox 1 HP Shaper are made from die- cast aluminum and feature non-marring • 1 HP, 1 phase, 110V motor green neoprene rubber • 14,000 RPM wheels. Because the • 1/2” spindle wheels turn in both • 3/4” spindle travel directions, they func- • 24-1/4” x 19” table tion as hold-downs • Miter slot rather than anti-kick- • Includes 1/4” and 1/2” router bit back devices. Mounts to fences 3” to 3-1/2” high x 1” or adapters & miter gauge wider. Use optional mounting tracks for mobility along fence. • Weight: 195 lbs.

#W1105 Hold-down device ...... $ 36.95 #W1107 12” optional mounting track ...... $ 11.95 #W1108 24” optional mounting track ...... $ 18.95 #W1701 $ 345.00 Right Angle Jig This amazingly affordable jig is constructed using top quality aluminum castings and plates Shop Fox 2 HP Shaper which are machined to exacting tolerances. Cut tenons, • 2 HP, 1 phase, 110/220V motor dados, rail ends, and finger • Reversing joints safely and with complete accuracy. • Two spindle speeds: 7,000 & 10,000 RPM • Spindles: 1/2" and 3/4" (Included) #W1500 Right Angle Jig ...... $ 169.95 • Spindle Travel: 3" • Table Size: 24" Wide x 21" Deep #W1301 Optional (shown) 6” vise clamps ...... $ 12.95 • 3” dust chute outlet • Heavy-Duty Miter Gauge Delta Sliding Shaper Jig • Weight: 293 lbs. Shown with D2057 Provides greater accuracy during a Adjustable Mobile Base. variety of shaping operations. (Not Included) Features 3 guide bar locations for positioning the workpiece as close as possible to both large and small #W1674 $ 680.00 diameter shaper cutters. Fits standard 3/8” X Optional Accessories: 3/4” miter gage grooves. #D3124 23” x 40” Extension table ...... $ 159.95 #43-188 Sliding Shaper Jig ...... $ 125.95 #D3080 1/4” & 1/2” Router bit spindle ...... $ 49.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 22

Planers & Accessories Mini Planer Pal Knife Shop Fox 20”Planer Setting Jig

• 5HP, 1 phase, 220V motor This gauge is designed to quickly set • Magnetic Safety Switch up planer knives to a tolerance on • Cutterhead Speed: 5,500 R.P.M. ±.001" on standard 1-7/8" diameter • Feed Rates: 18 & 23 F.P.M. cutterheads. Set your knives • Cutting Width: 20" perfectly every time. Sold in pairs • Cutting Height: 8" • Max. Depth of Cut: 1/8" #W1226 Mini planer pal ...... $ 29.95 • Cutterhead Diameter: 3-3/16" • 4 H.S.S. Knives • Anti-Kickback design • Approx. Shipping weight: 778 lbs. Planer Pal Knife Setting Jig #W1683 $ 1,595.00 This patented knife setting system Same as above but with Spiral lets you set planer knives in perfect Cutterhead • #W1718 $ 2,995.00 alignment every time. It also allows you to shift nicked knives in Optional Accessories: 2-1/2" to 4" cutterheads to get a #D3097 Set of 4 HSS 20” replacement knives ...... $ 109.95 perfect cut with accuracy of ±.002". #D3349 10-pack Repl carbide inserts for Spiral Cutterhead . .$ 36.50 Two jigs are needed for 15" to 20" planers. Three jigs for planers over 20"

#W1214 Single planer pal jig ...... $ 79.95 #W1216 Set of two planer pal jigs ...... $ 159.95 Thickness Gauge

This easy to use thickness Shop Fox 15”Planer gauge will provide lumber thickness readings in seconds. • 3 HP, 1 phase, 220V motor Measures from 0” to 2” in • Magnetic Safety Switch 1/32” increments. Use it to • Cutterhead Speed: 5,000 R.P.M. calibrate your planer thickness • Feed Rates: 16 & 20 F.P.M. gauge, measure lumber thick- • Cutting Width: 14-7/8" ness, molding widths, etc. • Cutting Height: 6-1/8" #19111 ...... $ 14.95 • Max. Depth of Cut: 1/8" • Cutterhead Diameter: 3" • 3 H.S.S. Knives • Approx. Shipping weight: 550 lbs. Shop Fox 15”Planer with Spiral Cutterhead #W1692 $ 1,199.00 • 3 HP, 1 phase, 220V motor • Spiral cutterhead Optional Accessories: • 2 Feed speeds: 16 & 20 FPM #D3301 Set of 3 HSS 15” replacement knives ...... $ 69.95 • 6” max planing thickness • Includes closed stand with extension rollers • Weight: 430 lbs. Heavy Duty 5-Roller Stand

For greater work stability and support, this 5 roller stand features large diameter ball bearing rollers mounted on a sturdy adjustable pedestal base. Adjusts in height from 26-1/2" to 45". 15-7/8" wide ball bearing rollers. 250 lb. capacity. #W1724 $ 999.00 #D2274 5-roller stand ...... $ 69.95 Optional Accessories: #X1724131 Set of 3 15” spiral repl knives . . . . . $ 65.00

Monday - Friday 23 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Planers & Accessories Flexible / Extending Roller Stand • Adjustable height from 26-1/4” to Shop Fox 15”Planer 37” • 9 Nickel plated rollers (1-1/2” x 20”) • 3 HP, 1 phase, 220V motor • Maximum extending length: 51” • 3 knife cutterhead • Compacted length: 16-1/2” • 2 Feed speeds: 16 & 20 FPM • 4” wheels with brakes • 6” max planing thickness • Loading capacity of 300 lbs. • Includes open stand with extension rollers #50-167 Flexible roller stand ...... $ 219.00 • Weight: 400 lbs.

Heavy Duty 9-Roller Table Use this versatile roller table wherever #W1723 you need extra workpiece support. $ 799.00 Features all-steel welded construction Optional Accessories: and measures 19" wide x 65" long. #X1723123 Set of 3 15” replacement knives ...... $ 48.00 Comes with 9 ball bearing rollers and has four independently adjustable legs for any leveling requirement. Adjustable in height from 26-3/8" to 44-1/8". 1,000 lb. capacity. Single Roller Stand #D2271 9-roller stand ...... $ 149.95 Adjustable from 26-1/2" to 45" high. All steel construction. Roller measures 15-7/8” wide. Lock knob holds roller at selected height. 250lb. capacity. Tilting Roller Stand #D2273 Single roller stand ...... $ 42.95 Beefy rollers and sturdy adjustable base makes this stand ideal for handling or supporting any flat or round stock. Independent rollers adjust to 4-Point Roller Stand any angle. Adjusts in height from 25- 1/4" to 43-1/4". Rollers tilt from 0 to This new and improved roller stand provides stability 45°. 5-3/4" wide ball bearing rollers. for every wood processing job. Welded square steel 150 lb. capacity. construction, variable height adjustment from 24-1/2" to 42" and flat storage make this the roller stand of #D2272 Tilting roller stand ...... $ 42.95 choice. 13" wide ball bearing roller. 150 pound capacity. #D2054 4-Point roller stand ...... $ 19.95

Shop Fox 13”Portable Planer Heavy Duty Ball Roller Stand Cast iron base with leveling feet. Allows material to roll in any direction. 150 lb. • 2 HP, 1 phase, 110V motor capacity. • Two knife cutterhead • 10,500 RPM cutterhead speed #50-160 ...... $ 52.00 • 6” max planing thickness • Feed rate: 26 FPM • 4 column support • Cutterhead lock helps reduce snipe • Includes dust head with 4” port Shop Tool Stand • Weight: 101 lbs. This tool table allows you to free up valuable work space by getting your smaller tools off your bench. A second #W1675 shelf can be added to store other items. $ 409.00 Table top measures 13” x 23” and is Optional Accessories: 30-1/2” tall. 700 lb. capacity. #D3167 Set of 2 HSS 13” replacement knives ...... $ 39.95 #D2056 ...... $ 39.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 24

Jointers & Accessories Magnetic Jointer Knife Setting Jigs Shop Fox 8”Jointer This knife setting system allows you to get jointer knives in perfect • 2 HP, 1 phase, 220V motor alignment every time. It also allows • Table size: 9-1/4" x 70" you to shift nicked knives to get a • Cutterhead diameter: 3" perfect cut to an accuracy of ± • Knives - size: 3 - 8" x 1" .001" . For 4" to 8" jointers with x 1/8" HSS knives. • Rabbeting capacity: 1/2" #W1211 Steel body jig ...... $ 49.95 • Max. width of cut: 8" #W1210 Polycarbonate body jig ...... $ 29.95 • Cutterhead speed: 5,500 RPM • Cuts per minute: 16,500 • Approx. shipping weight: 495 lbs. Dial Indicator and Magnetic Base #W1684 $ 999.00 Dial indicators are a necessity in any shop - woodworking and metalworking alike. Use them Same as above but with Spiral Cutterhead • #W1705 with magnetic bases for measuring runout, set- Optional Accessories: $ 1,395.00 ting up tool and checking alignment. Magnetic #D3166 Set of 3 HSS 8” replacement knives ...... $ 59.95 base has a very strong magnet that is easily #D3349 10-pack Repl carbide inserts for Spiral Cutterhead . .$ 36.50 activated with a convenient switch. Mounts at any angle and has a fine adjustment arm. #D1057 1” travel x .001” indicator...... $ 14.95 #D1058 Magnetic base ...... $ 20.50 Knife Hone & Guide With this handy sharpener, you will be able to hone your jointer and planer knives to razor sharp- Push Blocks ness without removing them from the machine! Great for quick touch-ups and extends the period Our push blocks are constructed of between major re-sharpening. #D1123 $ 8.95 high-impact molded plastic with natural rubber friction pads that grip the workpiece firmly. Woodworkers can Magnetic Featherboard work with confidence knowing that Powerful magnets hold the Grip-Tite guide solid these blocks are between their fingers and to any cast iron or steel tabletop. As a board is the cutting tool. Bright, safety-orange pushed between the Grip-Tite guide and the color makes them easy to find and fence, flexible polycarbonate feather blades reminds woodworkers that safety comes first! force the board down and against the fence. Narrow boards can be cut, shaped, or jointed #W1400 Standard push block ...... $ 4.95 without putting your hands near the blade. #W1401 Large push block ...... $ 7.95 #GRIP-TITE $ 38.95

Shop Fox 6”Jointer Shop Fox 6”Benchtop Jointer

• 1 HP, 1 phase, 110V motor • 12 amp, 1 phase, • Table size: 7" x 47" 110V motor • Foot print: 18-1/4" x 15-1/2" • 2 knife cutterhead • Cutterhead diameter: 2-1/2" • Table length: 28-1/2” • Knives - size: 3 - 6" x 1" x 1/8" • Cutterhead speed: • Rabbeting capacity: 1/2" 10,000 RPM • Maximum width of cut: 6" • Cuts per minute: • Cutterhead speed: 5,000 RPM 20,000 • Cuts per minute: 15,000 • Weight: 95 lbs. • Approx. shipping weight: 300 lbs.

#W1694 $ 239.00

#W1679 $ 599.00 Optional Accessories: Optional Accessories: #D3165 Set of 3 HSS 6” replacement knives ...... $ 49.95 #D3319 Set of 2 HSS 6” replacement knives . . . . $ 24.95

Monday - Friday 25 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Lathe & Accessories

Shop Fox 8”x 12”Mini Lathe Outside & Inside Calipers Stainless steel with hardened fulcrum spring and points for long life. Precision ground with threaded • 1/3 HP, 1 phase, 120V motor spool mechanism for infinite adjustment. • Variable speed: 700 to 3,200 RPM #19052 8” outside caliper ...... $ 9.95 • 12” distance between centers #19054 8” inside caliper...... $ 9.95 • 8” swing over bed • 3/4” x 16 TPI RH spindle Face Shield • Includes: MT #1 This professional-quality shield offers full facial protec- spur center, MT #1 tion, making it an ideal aid for lathe work. Adjustment live center, 4-1/4” for head size. and 7” tool rests, 5- 3/4” face plate. #CPV15M86U ...... $ 12.40 • Weight: 45 lbs.

General International 6”Slow Speed Grinder #W1704 $ 169.00 • Ideal for sharpening high-speed steel tools like chisels, lathe tools, knives and plane irons • 1/3 HP, 1 phase, 115V motor 8pc Deluxe H.S.S. Lathe Chisel Set • 1,720 RPM With proportionately longer handles to • Two 6” x 3/4” x 1/2”AH wheels cutting tools, these Lathe Chisels offer • Includes tool rests, eyeshields & flexible outstanding control. Includes 1" skew, 1- neck work lamp 1/2" skew, 1/2" spearpoint, 1/8" parting • Weight: 18 lbs. tool, 1/2" round nose, 1/4" gouge, 1/2" #15-625-M1 gouge and 3/4" gouge. 14-1/2" overall. $ 59.00

#D2228 ...... $ 34.95 Delta Sharpening Center Steelex 5-Piece Mini Turning Chisel Set • 1/5 HP, 1 phase, 115V motor For fine detail turning, this 5-piece turning chisel • 8”, wet wheel, 400 RPM set features well balanced hardwood handles and • 5” dry wheel, 3,450 RPM high carbon steel cutting edges. Includes 1/16” • Includes tool rest base, radius gouge, 1/8” radius gouge, 3/16” parting sliding tool holder, water tool, 1/4” spear point, 1/4” skew. 10-1/2” overall tank, tool rest, & eye length. shield #D2250 ...... $ 29.95 • Weight: 43 lbs.

Steelex 6-Piece Deluxe Lathe Chisel Set #23-710 $ 175.00 High speed steel blades with beefy ash handles. Optional Accessories Includes a 17” long 13/16” parting tool, #23-715 Knife grinding attachment. Holds planer and jointer 13/16” round nose and 3/8” gouge; a 19” long knives up to 15-1/2” long and may be used on wet 1” skew, a 5/8” gouge and a 22-3/4” long or dry wheel ...... $ 74.95 3/8” gouge. Comes in plastic storage box. #D2304 ...... $ 84.95 Delta Shopmaster Utility Sharpener Center Finder • 120 grit, 4-1/2” x 1-1/2” wet/dry grinding wheel for fine sharpening Find the center of round or square stock. One • Reversible wheel rotation for use side locates a diagonal line on square stock up with dual tool rests to 8” x 8” and the other side locates a diago- • 0.7 AMP, 120V motor nal line on round stock up to 4-1/2” in diame- • Slow, 170 RPM speed ter. reduces heat #D3098 ...... $ 4.95 • Weight: 9 lbs. #GR050 $ 42.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 26

Sanders

Shop Fox 24”Wide Belt Sander Abrasive Cleaning Pad for Wide Belt Sanders with Digital Readout This product can pay for itself in just one use while extending belt life six to • Numeric control pad and digital eight times normal. This special pad readout provide the ultimate in measures 15” x 20” x 1-1/8”. Simply precision and ease of use. feed it through the Wide-belt or Drum • Sanding belt motor: 10 HP, 1 Sander with light contact with the sand- phase, 220V motor paper and it unloads all the build-up. • Conveyor feed motor: 1 HP • Power table raise & lower #D3003 ...... $ 59.95 • Elevation motor: 1/3 HP, 220V, 1 phase • Combination sanding head • Belt size: 25" x 60" Shop Fox 20”Wide Belt Sander • Maximum working thickness: 6” • Air requirements: 57 PSI with Digital Readout • Variable feed rates: 14-3/4 to 49 FPM • This compact wide belt sander • Dust outlet dia: Two 4” ports has digital controls and readout for • Approx. shipping weight: 1,650 lbs. #W1710 $ 7,500.00 setting your sanding depth automatically. • Sanding belt motor: 7-1/2 HP, 1 25”x 60”Sanding Belts phase, 220V Part No. Grit Price Qty Price • Conveyor feed motor: 1/2 HP #25X60X40X 40 $ 31.70/ea $ 29.20/3+ • Power table raise & lower #25X60X60X 60 $ 28.05/ea $ 25.70/3+ • Elevation motor: 1/3 HP, 220V, 1 #25X60X80X 80 $ 26.60/ea $ 24.40/5+ phase #25X60X100X 100 $ 25.65/ea $ 23.55/5+ • Combination sanding head #25X60X120X 120 $ 25.65/ea $ 23.55/5+ • Belt size: 20-1/2" x 48" #25X60X150X 150 $ 25.65/ea $ 23.55/5+ • Maximum working thickness: 6” • Air requirements: 57 PSI 20-1/2”x 48”Sanding Belts • Conveyor speed: 16.4, 23 & 32.8 #D3305 20-1/2” x 48” 60 Grit AO Belt ...... $ 23.50 FPM #D3306 20-1/2” x 48” 80 Grit AO Belt ...... $ 23.50 • Dust port: 4" #D3307 20-1/2” x 48” 100 Grit AO Belt ...... $ 21.50 • Approx. shipping weight: 961 lbs. #D3308 20-1/2” x 48” 120 Grit AO Belt ...... $ 21.50 #D3309 20-1/2” x 48” 150 Grit AO Belt ...... $ 21.50 #W1709 $ 5,499.00 16”x 48”Sanding Belts #D3151 16” x 48” 60 Grit AO Belt ...... $ 42.95 Performax 10-20”Single Drum Sander #D3152 16” x 48” 80 Grit AO Belt ...... $ 42.95 • 1 HP, 1 phase, 115V motor #D3153 16” x 48” 100 Grit AO Belt ...... $ 42.95 • Variable speed conveyor #D3154 16” x 48” 120 Grit AO Belt ...... $ 42.95 motor (0 to 12 FPM) #D3155 16” x 48” 150 Grit AO Belt ...... $ 42.95 • One 5” x 10” drum • Maximum sanding width: 20” (in two passes) Shop Fox 15" Wide Belt Sander • Minimum sanding length: 2-1/4” • Maximum sanding thick- • This Wide Belt Sander with open end will sand ness: 3” flat panels up to 30" wide in half the footprint of • Minimum sanding thick- other wide belt sanders with the same capacity. ness: 1/32” • Sanding belt motor: 5 HP, 1 phase, 220V • One 4” dust hood outlet • Conveyor feed motor: 1/4 HP • Weight: 74 lbs. • Combination sanding head • Belt size: 16" x 48" #10-20+ $ 539.00 • Air requirements: 75 PSI • Conveyor speed: 13 and 16 FPM #60-1060 6ea) 60 grit ready-to-wrap abrasives ...... $ 29.95 • Dust port: 5" #60-1080 6ea) 80 grit ready-to-wrap abrasives ...... $ 29.95 • Approx. shipping weight: 1,000 lbs. #60-1100 6ea) 100 grit ready-to-wrap abrasives . . . . . $ 29.95 #60-1120 6ea) 120 grit ready-to-wrap abrasives . . . . . $ 29.95 #60-1150 6ea) 150 grit ready-to-wrap abrasives . . . . . $ 29.95 #60-1180 6ea) 180 grit ready-to-wrap abrasives . . . . . $ 29.95 #W1689 $ 3,195.00 #60-1220 6ea) 220 grit ready-to-wrap abrasives . . . . . $ 29.95 #60-1000 2ea) 36, 2ea) 80, 2ea) 120 grit abrasives . $ 29.95

Monday - Friday 27 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Sanders

6”x 80”Sanding Belts Shop Fox 6”x 80”Edge Sander Part Price Price Price No. Grit Each 5 - 9 10 + #6X80X60X 60 $ 11.52 $ 9.25 $ 7.70 • 1-1/2HP, 1 phase, 110/220V #6X80X80X 80 $ 11.15 $ 8.95 $ 7.45 (Prewired 220V) #D1265 2ea) 6” x 80” 100 Grit AO Belt . . . . . $ 15.00/2pk • Table size: 22" x 10-1/2" #D1266 2ea) 6” x 80” 120 Grit AO Belt . . . . . $ 15.00/2pk • Table travel: 5" #D1267 2ea) 6” x 80” 150 Grit AO Belt . . . . . $ 15.00/2pk • End sanding table allows for curved sanding #D1268 2ea) 6” x 80” 180 Grit AO Belt . . . . . $ 15.00/2pk • Belt speed: 1,800 FPM #D1269 2ea) 6” x 80” 220 Grit AO Belt . . . . . $ 15.00/2pk • Sanding head can be operated in any position between 0° to 90° for bevel sanding • 4" Dust port Abrasive Cleaning Sticks • Approx. shipping weight: 297 lbs. Increase the life of new sanding belts and discs with these quality abrasive belt cleaners. Simply press the cleaner light- ly against moving sanding belts and discs to remove clogged-up pitch and sawdust. #W1688 $ 699.00 #W1305 1-3/8”x1-3/8”x8-1/2” stick $ 4.95 #W1307 2”x2”x12” stick ...... $ 7.45

Aluminum Oxide Hard Sanding Sleeves Shop Fox Oscillating Size 40 Grit 60 Grit 80 Grit 100 Grit 120 Grit Spindle Sander #D1400 #D1401 #D1402 #D1403 1/4”x5” N/A 3 pack 3 pack 3 pack 3 pack • 1 HP, 1 phase, 110/220V motor $ 3.90 $ 3.90 $ 3.90 $ 3.90 • 27-1/2" x 27-1/2" precision- #D1405 #D1406 #D1407 #D1408 ground cast iron table 3/8”x6” N/A 3 pack 3 pack 3 pack 3 pack • Ten spindle sizes $ 5.10 $ 5.10 $ 5.10 $ 5.10 • Table height: 35-1/2" #D14191 #D1420 #D1421 #D1422 #D1423 • Table tilt: 45° front and 20° to the 1/2”x6” 1 each 3 pack 3 pack 3 pack 3 pack back $ 1.70 $ 5.10 $ 5.10 $ 5.10 $ 5.10 • Spindle speed: 1,725 RPM #D1425 #D1426 #D1427 #D1428 • Oscillation speed: 72 SPM 5/8”x6” N/A 3 pack 3 pack 3 pack 3 pack • Stroke length: 1-1/2" $ 5.40 $ 5.40 $ 5.40 $ 5.40 • Dust port: 4" opening #D1430 #D1431 #D1433 • Steel table inserts 3/4”x1” N/A 3 pack 3 pack N/A 3 pack • 100 grit sanding sleeve for each $ 2.20 $ 2.20 $ 2.20 spindle #D1440 #D1441 #D1442 #D1443 • Approx. shipping weight: 333 lbs. 3/4”x9” N/A 3 pack 3 pack 3 pack 3 pack $ 8.20 $ 8.20 $ 8.20 $ 8.20 #D1445 #D1446 #D1448 #W1686 $ 799.00 1”x1” N/A 3 pack 3 pack N/A 3 pack $ 2.20 $ 2.20 $ 2.20 #D1455 #D1456 #D1457 #D1458 1”x9” N/A 3 pack 3 pack 3 pack 3 pack $ 8.40 $ 8.40 $ 8.40 $ 8.40 Shop Fox 12”Disc Sander #D14741 #D1475 #D1476 #D1477 #D1478 1-1/2”x9” 1 each 3 pack 3 pack 3 pack 3 pack • 1 HP, 1 phase, 110V $ 3.40 $ 10.20 $ 10.20 $ 10.20 $ 10.20 motor #D1480 #D1481 #D1483 • 8-1/4” x 17-1/2” 2”x1-1/2” N/A 3 pack 3 pack N/A 3 pack tilting table $ 2.90 $ 2.90 $ 2.90 • Disc speed: 1,700 #D14891 #D1490 #D1491 #D1492 #D1493 RPM 2”x9” 1 each 3 pack 3 pack 3 pack 3 pack • 2” dust port $ 4.00 $ 12.00 $ 12.00 $ 12.00 $ 12.00 • Includes miter gauge #D1500 #D1501 #D1502 #D1503 • Weight: 74 lbs. 3”x9” N/A 1 each 1 each 1 each 1 each $ 5.30 $ 5.30 $ 5.30 $ 5.30 #D1505 #D1506 #D1507 #D1508 4”x9” N/A 1 each 1 each 1 each 1 each #W1708 $ 150.00 $ 9.00 $ 9.00 $ 9.00 $ 9.00

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 28

Sanders

4”x 36”Sanding Belts Shop Fox 6”x 48”Belt & 10”Disc Sander Part Price Price Price No. Grit Each 5 - 9 10 + 4X36X40X 40 $ 4.65 $ 3.70 $ 3.10 • 1HP, 1 phase, 110/220V motor 4X36X50X 50 $ 4.65 $ 3.70 $ 3.10 • Precision Ground Cast Iron Table 4X36X60X 60 $ 4.35 $ 3.50 $ 2.90 • Belt Speed: 2,300 FPM 4X36X80X 80 $ 4.15 $ 3.35 $ 2.75 • Disc speed: 2,420 FPM 4X36X100X 100 $ 4.05 $ 3.20 $ 2.70 • Vertical to horizontal belt head position 4X36X120X 120 $ 4.05 $ 3.20 $ 2.70 • One tilting table will move from belt to disc 4X36X180X 180 $ 4.05 $ 3.20 $ 2.70 unit • Heavy-Duty Miter Gauge • One 2” and one 2-1/2” dust port Shop Fox 4”x 36”Edge Sander • Approx. Shipping Weight: 170 lbs. • 1/3 HP, 1 phase, 110V motor • End sanding table allows for curved sanding • Sanding head can be operated #W1676 $ 395.00 in any position between 0° and 45° for bevel sanding 6”x 48”Sanding Belts • Tables are height adjustable Part Price Price Price • Belt speed: 2,100 SFPM No. Grit Each 5 - 9 10 + • Includes miter gauge 6X48X40X 40 $ 8.25 $ 6.80 $ 5.60 • Weight: 59 lbs. 6X48X50X 50 $ 8.10 $ 6.80 $ 5.60 6X48X60X 60 $ 7.50 $ 5.95 $ 4.95 6X48X80X 80 $ 7.05 $ 5.65 $ 4.70 6X48X100X 100 $ 6.85 $ 5.50 $ 4.55 6X48X120X 120 $ 6.85 $ 5.50 $ 4.55 #W1717 $ 199.00 6X48X150X 150 $ 6.85 $ 5.50 $ 4.55 6X48X180X 180 $ 6.85 $ 5.50 $ 4.55 6X48X220X 220 $ 6.85 $ 5.50 $ 4.55 Pressure-Sensitive Adhesive Adhesive Spray Sanding Discs Ideal for bonding abrasive discs without a PSA backing. A Sized to fit most common disc sanders - non-wrinkling, water-resistant and repositionable adhesive. from hand held orbitals to hefty shop Use for both temporary and permanent bonds. Bonds sanders, these aluminum oxide discs are woods materials easily. Prevents paper patterns and sten- pre-applied with top-quality pressure sensitive cils from shifting. 11 oz. aerosol can. adhesive. They’re available in a range from 60 to 220 grit and in diameters from 6” to 20”. #SDA ...... $ 6.95 Grit 6” 8” 9” 10” 12” 20” #D1307 #D1314 #D1321 #D1328 #D1335 #D1342 60 3 pack 3 pack 2 pack 2 pack 2 pack 2 pack $ 2.70 $ 4.80 $ 4.20 $ 5.00 $ 7.00 $ 18.00 Shop Fox 6”x 48”Belt #D1308 #D1315 #D1322 #D1329 #D1336 #D1343 80 3 pack 3 pack 2 pack 2 pack 2 pack 2 pack & 12”Disc Sander $ 2.70 $ 4.80 $ 4.20 $ 5.00 $ 7.00 $ 18.00 • 1-1/2 HP, 1 phase, 110V motor #D1309 #D1316 #D1323 #D1330 #D1337 #D1344 • Belt speed: 878 FPM 100 3 pack 3 pack 2 pack 2 pack 2 pack 2 pack • Disc speed: 1,725 RPM $ 2.70 $ 4.80 $ 4.20 $ 5.00 $ 7.00 $ 18.00 • Vertical or horizontal belt head #D1310 #D1317 #D1324 #D1331 #D1338 #D1345 position 120 3 pack 3 pack 2 pack 2 pack 2 pack 2 pack • Tilting tables for belt and disc $ 2.70 $ 4.80 $ 4.20 $ 5.00 $ 7.00 $ 18.00 • 2” and 2-1/2” dust ports #D1311 #D1318 #D1325 #D1332 #D1339 #D1346 • Includes miter gauge 150 3 pack 3 pack 2 pack 2 pack 2 pack 2 pack • Weight: 178 lbs. $ 2.70 $ 4.80 $ 4.20 $ 5.00 $ 7.00 $ 18.00 #D1312 #D1319 #D1326 #D1333 #D1340 #D1347 180 3 pack 3 pack 2 pack 2 pack 2 pack 2 pack $ 2.70 $ 4.80 $ 4.20 $ 5.00 $ 7.00 $ 18.00 #D1313 #D1320 #D1327 #D1334 #D1341 #D1348 220 3 pack 3 pack 2 pack 2 pack 2 pack 2 pack #W1712 $ 575.00 $ 2.70 $ 4.80 $ 4.20 $ 5.00 $ 7.00 $ 18.00

Monday - Friday 29 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Sanding Accessories Sanding Belts Portable Sanding Belts & Discs Aluminum Oxide, Resin bond, Open Coat Aluminum Oxide, Resin Bond, Open Coat and “X”-weight for long life. If you wish, you “X”-weight for long life. may combine various belts in order to The order number denotes belt size and grit. We receive multiple quantity discounts. stock belts and discs for virtually every sanding machine on the market today. 1”x 30”Sanding Belts Combine various belts and discs in order to Part Price Price Price receive multiple quantity discounts. No. Grit Each 5 - 9 10 + 1X30X50X 50 $ 2.30 $ 1.89 $ 1.59 1X30X80X 80 $ 2.30 $ 1.89 $ 1.59 1X30X100X 100 $ 2.30 $ 1.89 $ 1.59 3”x 21”Sanding Belts 1X30X120X 120 $ 2.30 $ 1.89 $ 1.59 Part Price Price Price 1X30X180X 180 $ 2.30 $ 1.89 $ 1.59 No. Grit Each 10 - 49 50 + 1X30X220X 220 $ 2.30 $ 1.89 $ 1.59 3X21X40X 40 $ 2.85 $ 1.50 $ 1.25 1X30X320X 320 $ 2.30 $ 1.89 $ 1.59 3X21X50X 50 $ 2.65 $ 1.50 $ 1.25 1”x 42”Sanding Belts 3X21X60X 60 $ 1.65 $ 1.50 $ 1.10 Part Price Price Price 3X21X80X 80 $ 1.65 $ 1.30 $ 1.10 No. Grit Each 5 - 9 10 + 3X21X100X 100 $ 1.60 $ 1.25 $ 1.05 1X42X50X 50 $ 1.55 $ 1.25 $ 1.05 3X21X120X 120 $ 1.60 $ 1.25 $ 1.05 1X42X80X 80 $ 1.35 $ 1.10 $ .90 1X42X100X 100 $ 1.35 $ 1.10 $ .90 3”x 24”Sanding Belts 120 Part Price Price Price 1X42X120X $ 1.35 $ 1.10 $ .90 No. Grit Each 10 - 49 50 + 1X42X180X 180 $ 1.35 $ 1.10 $ .90 3X24X40X 40 $ 2.70 $ 2.15 $ 1.80 1X42X220X 220 $ 1.35 $ 1.10 $ .90 3X24X50X 50 $ 2.55 $ 2.05 $ 1.70 1X42X320X 320 $ 1.35 $ 1.10 $ .90 3X24X60X 60 $ 2.50 $ 1.95 $ 1.50 4”x 132”Sanding Belts 3X24X80X 80 $ 2.15 $ 1.50 $ 1.35 Part Price Price Price 3X24X100X 100 $ 1.65 $ 1.30 $ 1.10 No. Grit Each 5 - 9 10 + 3X24X120X 120 $ 1.65 $ 1.30 $ 1.10 4X132X60X 60 $ 9.40 $ 9.20 $ 8.10 3X24X150X 150 $ 1.65 $ 1.30 $ 1.10 4X132X80X 80 $ 9.05 $ 8.60 $ 7.60 3X24X180X 180 $ 1.65 $ 1.30 $ 1.10 4X132X100X 100 $ 7.15 $ 7.20 $ 6.50 3X24X220X 220 $ 1.65 $ 1.30 $ 1.10 4X132X120X 120 $ 7.15 $ 7.20 $ 6.50 3X24X280X 280 $ 1.65 $ 1.30 $ 1.10 4X132X150X 150 $ 7.15 $ 7.20 $ 6.50 6”x 89”Sanding Belts 4”x 24”Sanding Belts Part Price Price Price Part Price Price Price No. Grit Each 5 - 9 10 + No. Grit Each 10 - 49 50 + 6X89X40X 40 $ 11.70 $ 10.95 $ 9.75 4X24X40X 40 $ 3.50 $ 2.80 $ 2.35 6X89X60X 60 $ 10.55 $ 9.90 $ 8.90 4X24X50X 50 $ 3.30 $ 2.65 $ 2.20 6X89X80X 80 $ 9.95 $ 9.50 $ 8.40 4X24X60X 60 $ 3.15 $ 2.50 $ 2.10 6X89X100X 100 $ 9.50 $ 7.95 $ 7.35 4X24X80X 80 $ 2.45 $ 2.00 $ 1.65 6X89X120X 120 $ 9.50 $ 7.95 $ 7.35 4X24X100X 100 $ 2.40 $ 1.95 $ 1.60 6X89X150X 150 $ 9.50 $ 7.95 $ 7.35 4X24X120X 120 $ 2.40 $ 1.95 $ 1.60 6X89X180X 180 $ 9.50 $ 7.95 $ 7.35 4X24X150X 150 $ 2.40 $ 1.95 $ 1.60 6X89X220X 220 $ 9.50 $ 7.95 $ 7.35 4X24X180X 180 $ 2.90 $ 2.35 $ 1.95 4X24X220X 220 $ 2.90 $ 2.35 $ 1.95 Sandflex® Abrasive Blocks This rubber compound block is embedded with grit Sand Paper Sheets that is constantly exposed during use. Popular applications for this unique block includes cleaning rust Constructed of tough aluminum oxide abrasive from tools and metals. Acts like a rust “eraser. ” with durable backing. Measures 3” x 2” x 3/4”. Sold per sleeve of 50 standard sized 9" X 11" sheets #SF101 Fine grit block ...... $ 3.95 #SF102 Medium grit block ...... $ 3.95 #SF103 Coarse grit block ...... $ 3.95 Part Number Grit/Weight 1-9 ea. 10+ ea. #17-101-080 80D $ 19.95 $ 16.95 Sanding Blocks #17-101-100 100B $ 17.50 $ 15.50 Made of extremely heavy rubber, these blocks are the #17-101-120 120B $ 17.50 $ 15.50 flattest and truest around. Use your standard sheet #17-101-150 150B $ 17.50 $ 15.50 materials, cut them to size, clamp them in with the built- #17-101-180 180B $ 17.50 $ 15.50 in clamping device and start sanding. #17-101-220 220B $ 17.50 $ 15.50 #C521 5” sanding block ...... $ 7.95 #17-101-320 320B $ 17.50 $ 15.50 #C522 9” sanding block ...... $ 12.95 #17-101-400 400B $ 17.50 $ 15.50

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 30

Drill Presses & Accessories

Shop Fox 34”5-Speed Floor Drill Press Utility Tray Model Radial Drill Press Keeps tools within easy reach; swings out of the way. Durable, tex- • The radial arm drill press is one of the most versa- tured plastic 11” diameter tray with tile and handy drill presses you can add to your metal swivel and mounting strap. shop. Between the tilt of the head and the tilt of the Fits drill presses with column diam- table you can drill any angle necessary. eter ranging in size from 1-1/2” to • 1/2 HP, 1 phase, 110V motor 3-5/8”. • Spindle travel: 3-1/4" #DPT-1 Drill press tool tray ...... $ 12.00 • Drill chuck: 5/8" • Speed range: 550 to 3,470 RPM • Table size: 12-1/4" Dia. • Approx. Ship. Weight: 150 lbs. Shop Fox 34”5-Speed Benchtop Radial Drill Press • The radial arm drill press is one #W1670 of the most versatile and handy $ 270.00 drill presses you can add to your shop. Between the tilt of the head and the tilt of the table you can drill any angle necessary. Angle Drill Press Vise • 1/2 HP, 1 phase, 110V motor • Speed range: 550 to 3,470 RPM This angle vise offers a full 90° adjustment from • 5/8” chuck size horizontal to vertical with easy-to-read scale and • 3-1/4” spindle travel indexing pin set for every 15°. Capacity is 3-3/4”. • 9-3/4” round table Jaws measure 4-1/8” wide. • Weight: 100 lbs #D2933 Angle drill press vise ...... $ 45.00

Drill Press Vises #W1669 $ 230.00 These drill press vises offer precision ground steel guide rods and precise threads for smooth action. Ground steel jaws feature fixed jaw V-grooves for holding round stock. Cross Sliding Vise #D2728 4” drill press vise ...... $ 18.95 This cross sliding vise features dove- #6856009 Powermatic 4” drill press vise ...... $ 38.00 tailed ways with adjustable gibs, #D2729 6” drill press vise ...... $ 26.95 steel jaws and precision longitudinal travel and cross travel. Fixed jaw has a horizontal and vertical Shop Fox 17" 12-Speed V-groove for holding round stock. Floor Model Drill Press #D2731 4” cross sliding vise ...... $ 59.95 • 1 HP, 1 phase, 110/220V motor • Spindle travel: 3-1/4" • Drill chuck: 5/8" Drill Press Clamps • Range of speeds: 140-3050 R.P.M. Drill press clamps adjust • Table size: 14" dia. quickly and easily to lock • Approx. Ship. Weight: 200 lbs. your workpiece in any position. The clamping pad pivots to conform to any workpiece, ensuring uniform pressure. #W1301 6” clamp, 1-1/2” capacity ...... $ 12.95 #D2192 10” clamp, 3” capacity ...... $ 14.95 #D2493 12” clamp, 5” capacity ...... $ 16.95

#W1680 $ 350.00

Monday - Friday 31 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Drill Presses & Accessories Shop Fox 13-1/4" 12-Speed Drum Sander Set Oscillating Bench Drill Press This drum sander set includes three rubber sanding drums • This unit serves as both a regular Drill 4-1/4” in length to accommodate Press and an Oscillating Spindle Sander 1”, 1-1/2” and 2” diameter sand- • 3/4 HP, 1 phase, 110V motor ing sleeves. This kit also includes one 80 grit sleeve for • Spindle travel: 3-1/4" each drum to get things started • Drill chuck: 5/8" #D2677 ...... $ 9.40 • Dust port size: 2-1/4" • 12 speeds: 250-3,050 R.P.M. • Table: Round 12-3/8" Dia. Mandrel • Includes: Mandrel and 3-spindle drum This carefully machined mandrel has a 3/8” shank and is sander set required to use our Drum Sander Set with any machine. • Approx. Ship. Weight: 130 lbs. Mandrel is included with the Shop Fox Oscillating Drill Presses featured here. #D2722 ...... $ 4.95 #W1668 $ 240.00

28-Piece Drum Sanding Set Shop Fox 8-1/2”5-Speed Oscillating Comes with 1/2”, 3/4”, 1”, 1-1/2” Bench Drill Press X 2” diameter drums. Drums are 2” long with 1/4” shank. Aluminum • This unit serves as both a regular Drill Press oxide sanding sleeves. and an Oscillating Spindle Sander • 1/2 HP, 1 phase, 110V motor #709471 ...... $ 19.95 • Speed range: 620 to 3,100 RPM • 1/2” chuck size Precision Drill Guide • 1-5/8” spindle travel • 7” x 7” square table Drills accurate right-angled or variable angled • 2-1/4” dust port holes with built-in protractor scale. Adjusts • Includes: Mandrel for use with drum sander set 45° in either direction of vertical drill posi- • Weight: 54 lbs tion. Slide lock for sanding and buffing applications. Anchoring pins hold the guide securely in place on flat surfaces, narrow edges, or large tubing. Use with 3/8” and 1/2” portable electric drills. Includes 3/8” #W1667 $ 125.00 chuck and chuck key. Optional Accessories: #36/37 ...... $ 44.10 #D2677 Drum sander set ...... $ 9.40

Doweling Jigs Now you can drill using a multiple combina- Sleeveless Sanding Drums tion of holes using various hole sizes. Self- centering action. All four holes are tapped to Turn your drill press into a spindle sander. A take replaceable drill bushings. Drill hole simple lock holds sandpaper tight so you can sizes are 1/4”, 5/16”, and 3/8”. Six drill use roll or sheet paper instead of sanding bushings are supplied, 2 of each size. sleeves. Recommended speed is 1,750 RPM. Arbor required for use with sanding drums. #D2500 ...... $ 56.95 For use in drill presses and lathe chucks. #328-2000 3/4” dia x 2-1/4” drum (complete with 1/4” arbor) . . $ 14.15 #328-3000 3/4” dia x 3” drum ...... $ 19.85 Dowels #328-3100 1” dia x 3” drum ...... $ 18.55 Package #328-3200 2” dia x 3” drum ...... $ 22.50 Part No. Size Quantity Price #328-3300 3” dia x 3” drum ...... $ 25.15 #328-6300 3” dia x 6” drum ...... $ 35.30 #62054 1/4” x 1-1/2” 20 $ 2.35 #328-1200 1/2” shank arbor ...... $ 1.55 #62060 5/16” x 1-1/2” 20 $ 2.35 #328-1300 3/8” shank arbor ...... $ 1.90 #62066 3/8” x 1-1/2” 20 $ 2.35 #328-1400 1/4” shank arbor ...... $ 1.90

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 32

Rosette Cutters Rosette Cutterhead & Knives Carbide Rosette Cutters This very popular Rosette cutterhead Smooth cutting, one-piece rosette cut- makes rosettes up to 3” in diameter. ters feature shear cutting carbide-tipped And, with the optional chuck arbor, you edges fro both slicing and scraping can adapt the cutterhead directly to a action. Get professional results and a tailstock or spindle taper. Cutterhead fine finish. 2-1/8” Diameter Rosette comes complete with shank and mounts Cutters are milled from a solid steel directly to a heavy-duty drill press or wood blank. These carbide tipped 1/2” shank lathe with 1/2” chuck. Rosette Cutters make crisp rosettes in most hardwoods and softwoods. #W1250 Rosette cutterhead . . . $ 29.95 Please note: although these cutters look like oversized router bits, they #W1251 Chuck arbor, JT6 MT#2 ...... $ 5.95 are too big for normal router speeds and are designed for use with a #W1252 Chuck arbor, JT6 MT#3 ...... $ 6.95 variable speed drill press or lathes only. Rosette Knives These knives will produce intricately carved rosettes on a drill press. You can also plane 3” smaller stock by using the flat profile knife (#W1255). Knives are ground on opposite sides, so only one knife is needed. For best results, we advise using birch, cherry or oak, at machine speeds of 250 to 350 RPM. #W1255 $ 19.95

2-5/8” 2-1/2” 2-5/8”

#DC1768 $ 59.95 #DC1769 $ 59.95 #DC1770 $ 59.95

#W1256 $ 19.95 #W1257 $ 19.95 #W1258 $ 19.95

2-1/4” 2-1/2” 2-3/4”

#DC1771 $ 59.95 #DC1772 $ 59.95 #DC1774 $ 59.95 #W1259 $ 19.95 #W1260 $ 19.95 #W1261 $ 19.95

2-1/4” 2-1/2” 2-15/16”

#W1262 $ 19.95 #W1263 $ 19.95 #W1264 $ 19.95

2-5/8” 2-9/16” 2-1/2” #DC1775 $ 59.95 #DC1776 $ 59.95 #DC1777 $ 59.95

#W1265 $ 19.95 #W1266 $ 19.95 #W1267 $ 19.95

Monday - Friday 33 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Drilling Accessories Steelex Forstner Bits 16-Piece HSS Hex Shank Forstner Bit Set With a center point for positioning, the scor- You can buy with confidence knowing these high ing motion of the Forstner Bit's outer rim pro- speed steel forstner bits will provide many years duces a clean, crisp entry and guides the bit of dependable service. This set features hex accurately to the bottom of the hole. The shanks for no-slip gripping in 3/8" and larger drill shearing action of the Forstner Bit's inner cut- chucks. Set include: 1/4", 3/8", 1/2", 5/8", 3/4", ting edges plane thin slices of wood directly 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8", upward and out of the hole reducing burning 1-3/4", 1-7/8", 2" and 2-1/8". The 1-1/8" and and chatter. 3/8” shank. 3-1/2” long. larger bits feature saw-tooth edges for aggressive boring action. #D1001 1/4”...... $ 3.95 #D1009 * 1-1/4”. . . . . $ 8.95 #D2846 5/16”...... $ 3.95 #D2854 * 1-5/16”. . . . $ 8.95 #D2719 ...... $ 119.95 #D1002 3/8”...... $ 4.49 #D1010 * 1-3/8”. . . . . $ 9.95 #D2847 7/16”...... $ 4.49 #D2855 * 1-7/16”. . . . $ 9.95 6-Piece HSS Hex Shank #D1003 1/2”...... $ 4.95 #D1011 * 1-1/2”. . . . . $ 10.95 #D2848 9/16”...... $ 4.95 #D2856 * 1-9/16”. . . . $ 10.95 Forstner Bit “Filler”Set #D1004 5/8”...... $ 5.49 #D1012 * 1-5/8”. . . . . $ 11.95 This set features hex shanks for no-slip #D2849 11/16”. . . . . $ 5.49 #D2857 * 1-11/16”. . . $ 11.95 gripping in 3/8" and larger drill chucks. #D1005 3/4”...... $ 5.95 #D1013 * 1-3/4”. . . . . $ 12.95 Set includes: 5/16", 7/16", 9/16", #D2850 13/16”. . . . . $ 5.95 #D2858 * 1-13/16”. . . $ 12.95 11/16", 13/16", and 15/16". #D1006 7/8”...... $ 6.49 #D1014 * 1-7/8”. . . . . $ 13.95 #D2851 15/16”. . . . . $ 6.75 #D2859 * 1-15/16”. . . $ 13.95 #D3076 ...... $ 12.95 #D1007 1 ” ...... $ 6.95 #D1015 * 2 ”...... $ 14.95 $ 14.95 #D2852 * 1-1/16” . . . . $ 7.25 #D2860 * 2-1/16”. . . . 15-Piece HSS Hex Shank Forstner Bit “Filler”Set #D1008 * 1-1/8” . . . . . $ 7.95 #D1016 * 2-1/8”. . . . . $ 15.95 #D2853 * 1-3/16” . . . . $ 8.25 * (saw toothed) This set features hex shanks for no-slip gripping in 3/8" and larger drill chucks. Set includes: 16-Piece Forstner Bit Set 5/16", 7/16", 9/16", 11/16", 13/16", 15/16", 1- 1/16", 1-3/16", 1-5/16", 1-7/16", 1-9/16", 1- Get sixteen precision ground bits along with an 11/16", 1-13/16", 1-15/16" and 2-1/16" bits. attractive wooden storage box. Includes 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1- #D3077 ...... $ 49.95 1/4”, 1-3/8”, 1-1/2”, 1-5/8”, 1-3/4”, 1-7/8”, 2”, 2-1/8” diameter bits. Each forstner bit is approximately 3-1/2” long. #D1030 ...... $ 54.95 6-Piece Brass Coated Wire Brush Set This 6-piece brush set is a perfect addition to your toolbox. The set 7-Piece Forstner Bit Set contains five wheels (2 - 1-5/8”, Get seven precision ground bits along with an one each 2”, 2-3/8” and 3”) and a attractive wooden storage box. Includes 1/4”, cup brush (2” diameter). All have a 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1” bits. Bits 1/4” shank suitable for use in a are approximately 3-1/2” long. portable drill. The brass coating helps to minimize corrosion of the steel bristles even after multiple uses. #D1027 ...... $ 14.95 #D2290 ...... $ 9.95

35mm Hinge Boring Bit Screw Extractors Carbide tipped boring bit creates clean entry Turned counterclockwise in an electric drill, this holes with smooth interiors for European-style tool makes easy work of removing broken screws from hinges. Use in drills or drill presses with 3/8” wood, while leaving a clean hole that can be filed with a chucks. dowel or plug. Use the 1/4” model for screws up to #8 and #D1026 ...... $ 15.95 the 5/16” model for #10 screws and larger. Size refers to the finished hole size. #800-3004 1/4” extractor...... $ 11.75 #800-3005 5/16” extractor...... $ 12.45 #800-3006 3/8” extractor...... $ 13.15 Visit the Belsaw website at: www.belsaw.com

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 34

Drilling Accessories Steelex HSS Brad Point Bits 13-Piece Spade Bit Set The woodworkers choice in boring bits. One of the most complete spade bit sets avail- With precision cutting spurs and center able. Features bit sizes 1/4”, 5/16”, 3/8”, point for accurate drilling, these High 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, Speed Steel bits will last long in the tough- 13/16”, 7/8”, 15/16”, and 1”. Includes wall est woods. rack. #D2332 1/8”...... $ 1.40 #D2345 21/64” . . . . . $ 2.50 #D2053 ...... $ 19.95 #D2333 9/64”...... $ 1.50 #D2346 11/32” . . . . . $ 2.50 #D2334 5/32”...... $ 1.50 #D2347 23/64” . . . . . $ 2.50 #D2335 11/64”. . . . . $ 1.60 #D2348 3/8” ...... $ 2.50 7-Piece Deluxe Auger Bit Set #D2336 3/16”...... $ 1.60 #D2349 25/64” . . . . . $ 2.60 These hex shank, long length bits allow the user to #D2337 13/64”. . . . . $ 1.60 #D2350 13/32” . . . . . $ 2.70 bore deep holes through most wood, walls and #D2338 7/32”...... $ 1.70 #D2351 27/64” . . . . . $ 2.70 flooring. The screw tip guides the bit on a straight #D2339 15/64”. . . . . $ 1.70 #D2352 7/16” ...... $ 2.80 path. Set includes 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, #D2340 1/4”...... $ 1.70 #D2353 29/64” . . . . . $ 2.90 7/8” and 1” auger bits. Includes wood storage #D2341 17/64”. . . . . $ 1.89 #D2354 15/32” . . . . . $ 3.00 box. $ 3.20 #D2342 9/32”...... $ 1.99 #D2355 31/64” . . . . . #D2021 ...... $ 49.95 #D2343 19/64”. . . . . $ 2.10 #D2356 1/2” ...... $ 3.20 #D2344 5/16”...... $ 2.40 8-Piece Deluxe Plug Cutter Set 25-Piece Brad Point Set This high quality carbon steel plug cutter set Every woodworker needs this set. Twenty-five includes both straight and tapered styles. Makes bits in sizes from 1/8” to 1/2” in 1/64” increments. Comes in a steel index. smooth-sided plugs with rounded shoulders for easy insertion into a bored hole. #D1034 ...... $ 17.95 #D2022 ...... $ 36.50 7-Piece Carbide Tipped Brad Point Set 4-Piece Plug Cutter Set Carbide tipped brad point drill bits stay sharp- High quality carbon steel tapered style plug cut- er longer and practically eliminate cross-grain ters in wood box, sizes 1/4”, 3/8”, 1/2”, and tear-out. Includes 1/8”, 3/16”, 1/4”, 5/16”, 5/8”. 3/8”, 7/16” and 1/2” bits. #190090 ...... $ 21.95 #D1032 ...... $ 17.95

7-Piece Deluxe Brad Point Set Tenon / Plug Cutters These bits feature fully ground flutes. These cutters are uniquely designed to cut round, smooth Includes 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, tenons, plugs and dowels up to 3” long. Milled from solid 7/16” and 1/2” bits. high-carbon steel, the precision-ground edges cut through the #D1033 ...... $ 6.95 hardest woods while maintaining an extremely sharp edge. #D1045 3/8” cutter ...... $ 19.95 7-Piece Steel Brad Point Set #D1046 1/2” cutter ...... $ 22.95 #D1047 5/8” cutter ...... This starter set includes the most popular sizes for $ 24.95 #D1048 3/4” cutter ...... doweling. Includes 1/8”, 3/16”, 1/4”, 5/16”, $ 26.95 #D1049 1” cutter ...... 3/8”, 7/16” and 1/2” bits. $ 29.95 #D1031 ...... $ 6.95 Steelex Hinge Bits 7-Piece Split Ring Depth Stop Set Drill perfectly aligned hinge screw holes. Self centering, spring-loaded drill bits are guided by Precise and consistent drilling depths can the hinge screw holes. Hex shanks fit all quick- be achieved with these split ring depth change drill/drive systems. stops. Simply slide over the appropriately sized drill bit and lock in position by #D2713 Hinge Bit (#3,4) ...... $ 4.40 tightening the socket head screw. Split #D2714 Hinge Bit (#5,6) ...... $ 4.40 ring clamping prevents damage to drill bits and allows tremendous tight- #D2715 Hinge Bit (#8,9,10) ...... $ 4.40 ening pressure so there’s no slipping on the bit. Sizes include: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, and 1/2”. Includes hex wrench. #D2803 ...... $ 4.95

Monday - Friday 35 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Drilling Accessories Steelex 5-Piece Rotary Rasp Set 29-Piece Cobalt Drill Bit Set Quarter inch shank Rotary Rasp Set features These premium bits are engineered to handle high five different shaping profiles to remove tensile steels and hard-to-machine alloys and are wood quickly with aggressive cutting teeth. typically used in aerospace applications. Set fea- Each Rotary Rasp mounts in 1/4" or larger tures an excellent selection of bits, ranging from variable speed drill for unsurpassed wood 1/16” to 1/2” in increments of 1/64”. Includes shaping ability. convenient steel index. #D2257 ...... $ 3.99 #D2140 ...... $ 74.95

Adjustable Circle Cutter 115-Piece HSS Drill Bit Set Designed for use on a drill press, this fully This drill set features 29 fractional bits rang- Adjustable Circle Cutter will cut flat sided holes in ing from 1/16” to 1/2”, lettered bits from A wood from 1" to 5". Made of M-2 alloy steel, this to Z, and 60 numbered bits. HSS bits are Circle Cutter features a 3/8" hex shank, 5/16" drill, treated and finished with a black oxide coat- center point and Allen® wrench. ing. Housed in a rugged steel case with easy- to-read markings. #D2251 ...... $ 9.95 #D1137 ...... $ 52.95 22-Piece Tapered Drill Set 29-Piece HSS Drill Bit Set This set contains tapered drills sized for This precision crafted set features an excellent #5, #6, #7, #8, #9, #10, #12 screws, selection of bits, ranging from 1/16” to 1/2” in plus the stop collars and countersinks & increments of 1/64”. HSS bits are treated and counterbores to match them. Includes finished with a black oxide coating. Housed in a allen wrench. #D1041 ...... $ 16.95 rugged steel indexed case. #D1135 ...... $ 19.95 Right Angle Drill Attachment This right angle drill attachment allows Drill Doctor #750 Professional the user to access tight places where normal drills can’t reach. 3/8” shaft fits Drill Bit Sharpener power drills with 3/8” or larger chucks. The top-of-the-line model. Made for crafts- Includes side handle, 3/8” chuck and men and tradesmen who work in metals as chuck key. well as wood. Restores split points and 135° point angles. Features a replaceable dia- #D2960 ...... $ 15.95 mond sharpening wheel, comes with two chucks for handling drill bits from 3/32” to Drill Guide 3/4” and a chuck storage rack. 110V. #DD750SP ...... $ 155.00 This simple, yet precise Drill Guide locates exact drilling centers and guides drill bits perfectly perpendicular to the workpiece on flat, round, spherical and Drill Doctor #500 Tradesman corner edges. The drill guide also acts as a quick and accurate dowel drilling guide for edge joining. Drill Bit Sharpener Includes 3/16”, 1/4”, 5/16”, 3/8”, 7/16” and 1/2” Restores high performance split points (split drill bushings, locating pin and guide. points are self-centering bits that eliminate the #D3206 ...... $ 12.95 need for a center punch). Also restores 135° drill points - used for drilling hardened metals. Features a replaceable diamond sharpening 25-Piece Quick Change Bit Set wheel. Sharpens drill sizes 3/32” to 1/2”. 110V #DD500SP ...... $ 125.00 This all-in-one Quick Change Bit Set makes changing from drill bit to screwdriver bit or nut Tap & Die Sets driver a snap. Hex shank bits and a spring loaded quick change chuck are the ultimate in conven- These fine quality sets include both coarse and ience. The quick change chuck fits all portable fine thread tap and dies. Tap and dies are drills. 1/16” through 1/4” drill bits are titanium number from #4-40 to #12-24 and fractional coated for long life. Includes a compact storage taps and dies from 1/4" -28 to 1/2" -20 and case. 1/8" -27 NPT. Each set includes thread gauge, tap handle, die handle and small tap chuck, all in a nice molded case. The #D3205 ...... $ 19.95 60-piece set also includes metric taps and dies from M3 x .5 to M12 x 1.75. Made of high carbon steel. #W2503 40-Piece Tap & Die Set ...... $ 49.95 #D2018 60-Piece Tap & Die Set ...... $ 59.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 36

Drilling Accessories & Mortiser BeadLOCK® Loose Tenon Joinery System A patented mortise and tenon joint that's made with a hand drill! Shop Fox Mortising Machine Now you can use your hand drill to make a joint that is stronger and more versatile than • 3/4 HP, 1 phase, 110V motor dowel, biscuit, or standard mortise and • 1/4” to 1/2” Chisel capacity tenon joints. Loose tenon joinery provides • Unique swiveling head assembly an excellent means of joining two members • Double support columns particularly for deep joints and those joints • Mortise to the center of a 8" wide board where profiled parts come together like from matched cabinet cutters. With the • Mortise lumber to 8-3/4" thick BeadLOCK jig, you simply drill holes and • 1/2” chuck capacity insert BeadLOCK tenon stock for a strong, • Extra long (22") quick set handle accurate joint that's quick and simple to make. • Approx. Ship. Weight: 90 lbs.

Combination BeadLOCK Kit #W1671 $ 229.00 To make both 3/8" and 1/2" joints, this kit includes a beadLOCK jig with one 3/8" and one 1/2" guide block, two feet of 3/8" and two feet of 1/2" tenon stock, a shim set and complete instructions. #BTJ9802 ...... $ 45.99 Steelex Mortising Chisels and Bit Set

BeadLOCK Tenon Stock BeadLOCK Tenon Stock is made of premium birch which is naturally stable and very strong. Additional tenon stock to fit both 3/8" and 1/2" beadLOCK joints, is available in packages of three #D2839 1/4” Mortising chisel ...... $ 8.95 one-foot lengths. #D2840 5/16” Mortising chisel ...... $ 8.95 #D2841 3/8” Mortising chisel ...... $ 8.95 #BTJ9803 3/8” tenon stock (36”) . . . . $ 5.50 #D2842 1/2” Mortising chisel ...... $ 8.95 #BTJ9804 1/2” tenon stock (36”) . . . . $ 5.50 #D2843 5/8” Mortising chisel ...... $ 10.95 #D2844 3/4” Mortising chisel ...... $ 12.95 #D2845 4-piece set (1/4” to 1/2”) in plastic case ...... $ 34.95 BeadLOCK Router Bits These carbide-tipped safety bits are avail- Accusharp Knife able in both 3/8" and 1/2" sizes and are Sharpener intended for use on stationary router tables. Now woodworkers can make their own tenon Finally, a Knife stock in any wood species desired. 1/2" Sharpener any- shank. one can use! #BRB0100 3/8” stock router bit ...... $ 63.99 No more messy oils or stones. In #BRB0101 1/2” stock router bit ...... $ 63.99 about 10 seconds, you can sharpen knives, (even serrated knives), cleavers, axes, machetes, and many 8-Tray Sandpaper Storage Stand other cutting tools. The large ergonomic handle fits either hand safely and securely. The full length finger guard protects your fingers. Sharpening This sandpaper storage stand with eight blades are Diamond Honed Tungsten Carbide and provide years of reliable sliding trays is the perfect way to protect, use. AccuSharp will not rust and can be cleaned with soap and water, or sort and store standard sized sandpaper in the dishwasher. sheets. Open-front trays allow easy sand- #15896 ...... $ 10.95 paper identification by either sight or feel. Each tray measures 10” wide by 12” deep and will hold up to 50 full size sandpaper sheets. Try / Setup Gauge #D2927 ...... $ 35.00 This solid brass tool lets you have a 90° angle available at all times (hole is for key chain). Size is 2-3/8” x 1-7/8”.

#625-3500 ...... $ 6.60

Monday - Friday 37 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Dust Collectors

Shop Fox 3 HP Dust Collector Woodshop Dust Control A practical guide to respirators, shop vacuums, central • 3 HP, 1 phase, 220V motor collection systems, air-filtration devices, and more. Wood chips and sawdust in the woodshop are not just a nui- • Motor amp draw: 18 Amps (220V) sance -- they can also present a significant health haz- • One 8” or four 4” hose connections ard. But the good news is that Woodshop Dust Control, • Air suction cap.: Approx. 2,800 CFM the first definitive and comprehensive book on the sub- • Bag size (Dia. x depth): 19" x 33" (4) ject, shows you how to successfully control woodshop dust. • Height (With bags inflated): 78" #70246 ...... $ 19.95 • Bag volume: 10.8 Cubic Feet • Standard bag filtration: 30 Micron • Approx. shipping weight: 170 lbs. Controlling Dust in the Workshop Woodworkers often get in trouble with their families for messy sawdust. Worse, wood dust has been shown to be a grave health hazard....Proper dust collection can prevent or minimize...these problems. Peters shows the #W1687 $ 625.00 types of protective equipment and dust collectors available and provides instructions on designing a collection Optional Accessories: system. Plans to make fixtures for specific machines are given, as well as #D1795 Replacement Upper Bag ...... $ 23.95 maintenance instructions. Every woodworking collection should include #D1796 Replacement Lower Bag ...... $ 23.95 this title. #D3116 3 Micron Oversized Bag ...... $ 59.95 #3689-4 ...... $ 14.95

Constructing Staircases Shop Fox 2 HP Dust Collector Its 10 chapters cover all the essentials including the subjects of code requirements, stairwell framing, notched and housed stringers, L-shaped, and U-shaped and curved stair construction...many color photos and drawings to explain and expand on • 2 HP, 1 phase, 220V motor the text. ...the book will also serve as an in-house training guide • Motor Amp Draw: 9 Amps (220V) in design offices with the lessons it offers on stair terminology • One 6” or two 4” hose connections and construction methods. It offers great value for the price."-- • Height (With bags inflated): 78" Wood Design & Building. 128 pages. Softcover. • Bag Size (Dia. x depth): 19" x 33" (2) #8101-6 ...... $ 14.95 • Air Suction Capacity: Approx. 1550 CFM • Standard Bag Filtration: 30 Micron Framing Basics • Approx. Shipping Weight: 130 lbs. Framing Basics offers a helpful introduction to framing for do-it- yourselfers...Peters covers tool-use, materials, methods of work, and demolition in easily understood text supplemented with numerous color photographs....is well written and is geared toward the beginner; with other titles in Sterling's "Basics" series, it deserves a place in most public library collections."--Library Journal. 128 pages. Softcover. #W1666 $ 275.00 #5899-5 ...... $ 14.95 Optional Accessories: #D1795 Replacement Upper Bag ...... $ 23.95 #D1796 Replacement Lower Bag ...... $ 23.95 Shop Fox 1-1/2 HP Dust #D3116 3 Micron Oversized Bag ...... $ 59.95 Collector • 1-1/2 HP, 1 phase, 110V motor The Builder's Book of Bathrooms • Motor amp draw: 16 Amps (110V) Building -- renovating -- repairing -- improving. Here is a compre- • One 6” or two 4” hose connections hensive handbook on bathroom design and construction for • Height (With bags inflated): 78" builders at all levels of experience. Written by experienced • Bag Size (Dia. x depth): 19" x 33" (2) remodeler and Fine Homebuilding magazine contributing editor • Air Suction Capacity: approx. 1280 CFM Andrew Wormer, this book gives essential information for every type of bathroom project. 224 pages. Hardcover. • Standard Bag Filtration: 30 Micron • Approx. Shipping Weight: 120 lbs. #70343 ...... $ 29.95 Painting and Finishing A practical painting and finishing guide for the homeowner Painting and finishing around the home can be daunting, both from the scale of the work and the bewildering array of finishing #W1685 $ 239.00 options available. But you can save yourself frustration, time, and Optional Accessories: money with the help of Build Like a Pro: Painting and Finishing. #D1795 Replacement Upper Bag ...... $ 23.95 Written by a finishing professional, it’s an authoritative and #D1796 Replacement Lower Bag ...... $ 23.95 practical guide to accomplishing the major finishing tasks around the home. 176 pages. Softcover. #D3116 3 Micron Oversized Bag ...... $ 59.95 #70603 ...... $ 19.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 38

Dust Collection Accessories

Blast Gates Universal Adapter 4” Plastic Quick Disconnect A blast gate enables 4” inside diameter on one you to maximize your Seven-step adapter pro- side and 4” outside diam- dust collection system vides a multitude of dust eter on the other to quickly efficiency by allowing collection reducing provide an airtight fit. you to control air flow options. Simply cut from one machine to away unneeded steps #W1038 $ 4.95 another. Available with a hacksaw. Outside both in plastic and diameter step sizes aluminum. include 1”, 2”, 2-1/2”, #W1039 $ 5.95 Wye Branch Aluminum Blast Gates 3”, 4”, 5”, and 6”. #W1141 3” Outlet ...... $ 10.95 #W1142 4” Outlet ...... $ 12.95 Reducers #W1014 3” Wye branch ...... $ 4.95 Plastic Blast Gates #W1015 4” Wye branch ...... $ 6.95 #W1006 3” Outlet ...... $ 5.49 #W1007 4” Outlet ...... $ 6.49 #W1008 5” Outlet ...... $ 7.95 #W1020 3” to 2” reducer ...... $ 3.95 T-Fitting #W1009 6” Outlet ...... $ 9.95 #W1041 3” to 2-1/2” reducer ...... $ 4.95 #50-482 4” to 2-1/4” reducer ...... $ 5.50 #W1044 4” to 2-1/2” reducer ...... $ 5.49 Plastic Dust #W1011 4” to 3” reducer ...... $ 3.95 #W1012 3” T-Fitting ...... $ 4.95 Collector #W1037 5” to 4” reducer ...... $ 3.95 #W1013 4” T-Fitting ...... $ 6.95 Hose Elbow Fitting Hose Adapters Our flexible dust collector hoses are specifically For increasing 1-1/2” designed for your dust collection needs (2-1/2" hose to 2-1/2” #W1016 3” Elbow fitting ...... $ 4.95 hose is the standard diameter for shop vacs). #W1017 4” Elbow fitting ...... $ 6.95 #W1026 2”Diameter x 10’ $ 10.95 #39335 $ 8.16 #W1027 2-1/2" Diameter x 10' $ 12.95 Universal Dust Port #W1028 3" Diameter x 10' $ 13.95 Threaded end fits 1-1/2” OD Fits over a 3" hole and is easily #W1031 4" Diameter x 10' $ 14.95 hose with step-down adapter attached with double sided tape #W2031 4" Diameter x 10' CLEAR $ 14.95 (1” ID / 1-5/16” OD) #W1032 4" Diameter x 20' $ 27.95 or screws. Outlet diameter is 2- #39341 $ 13.61 #W1033 5" Diameter x 10' $ 23.95 1/2" so it will fit most home shop vacuums. #W1042 $ 5.49 Threaded end fits 1-1/2” Natural Rubber- OD hose with adapter Wire Reinforced steps of 7/8” ID, 1-1/16” Floor Sweep Dust Collector ID, and 1-3/16” ID #39342 $ 21.00 Hose

Our premium quality dust collector hose is man- Step Adapter ufactured from natural rubber and wire rein- Use in conjunction with our 4" blast gate; open Step adapter steps down forced. Sold in 5' increments. Priced per foot. gate and sweep dust in. Attach to floor with dou- three times from 1-3/8” ble sided tape or duct tape. ABS plastic. #FH-2 2” diameter ...... $ 4.65/ft ID to 7/8” ID. #FH-2.5 2-1/2” diameter . . . . $ 5.25/ft #921072K13 $ 3.10 #W1003 $ 9.95 #FH-3 3” diameter ...... $ 6.46/ft #FH-4 4” diameter ...... $ 6.70/ft #FH-5 5” diameter ...... $ 8.48/ft Vacuum Hose Steel Band Hose Clamps #FH-6 6” diameter ...... $ 10.34/ft 10’ - attaches to #W1021 3” $ .79 standard 1-1/2” #W1022 4” $ .89 shop vac line Splice Fitting #W1023 5” $ .99 #W1024 6” $ 1.09 Used to connect full sections of hose for longer runs #39332 $ 25.00 Wire Hose Clamps or to utilize short sections. #W1018 3” Splice fitting ...... $ 3.95 #W1316 3” $ .89 #W1019 4” Splice fitting ...... $ 4.95 #W1317 4” $ .95 #W1318 5" $ 1.29

Monday - Friday 39 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Dust Collection Accessories • Air Cleaner Dust Collector Separator Shop Fox 3-Speed Air Cleaner with Remote Just fit the dust collection separator onto any standard 32 gallon metal trash can between your machinery and dust collector system. Automat- • 1/5 HP, 1 phase, 115V motor ically removes heavy wood chips. • Motor Speeds: Low 750 RPM, Ideal when connected to planers and Medium 960 RPM, High 1200 RPM other machinery that create high vol- • High Speed Sound Rating: 69 dB umes of wood waste. • Air Flow at High Speed: 1044 CFM # W1049 $ 34.95 • Primary Filter: 5-Micron , Pleated Mini Dust Collection Separator fits any 5 gallon bucket. Use Type with 2-1/2” diameter hose for shop vacs. • Secondary Filter: 1-Micron, Bag Type #W2049 Mini Collector ...... $ 22.95 • Shipping Weight: 64 lbs.

2-1/2" Hose Adapter # This fitting allows you to use standard 2-1/2" W1690 $ 229.00 dust collection hose directly with standard shop vacs. A 2-1/2" dust port is standard on Optional Accessories: many makes of bandsaws, belt sanders and other woodworking machines. Use with #D3209 1 Micron Inner Filter ...... $ 29.95 above Mini Collector. #D3210 5 Micron Outer Filter ...... $ 17.95

#W2046 Hose Adapter ...... $ 5.49 110V Remote Dust Collector Switch Dust Collection Hood This remote switch allows you to This fully adjustable Dust Collection Nozzle fits any 4” turn your dust collector on and off flexible hose attached to a dust collector and provides a from anywhere in your shop up to 75 quick and easy pick-up source for dust producing feet away, saving you trips to your machines. 1-1/8” x 12-1/2” wide nozzle rotates 360° dust collector whenever you operate and can be angled 180° in any position between straight a shop machine. Includes two con- up and straight down. Stable stand adjusts from 24” to trols with 9 volt batteries. For use 43-1/2”, making it ideal for portable power tools. on 110 volt dust collectors up to 1- 1/2 HP. #D2267 ...... $ 49.95 #D3038 ...... $ 44.95 Table Saw Dust Hoods Fits most 8", 10" and 12" contractor type table Hose Hanger saws. Very popular with contractors because they Support flexible hose anywhere with this hose can be permanently attached to the saw without hanger. Fasteners not included. 4-1/4” adding excessive weight. Outlet diameter is 4". Diameter. #D2107 ...... $ .60 #W1004 12-1/4” x 12-1/4” Overall size ...... $ 9.95 #W1005 14-1/16” x 14-1/16” Overall size ...... $ 11.95 Grounding Kit This kit will allow you to ground your dust collection sys- Jointer Dust Hoods tem to reduce static electricity and fire hazards. Kit Fits most jointers on the market today. Model includes 50' of 14 gauge copper wire, grounding screws, W1001 fits over a 6-1/2" x 6-1/2" chute and terminals, drill bit and instructions. W1002 fits over a 7" x 8-1/2" chute. Outlet #W1053 ...... $ 9.95 diameter is 4". #W1001 8-1/4” x 8-1/4” Overall size ...... $ 5.95 #W1002 8-7/16” x 10-1/4” Overall size ...... $ 6.49 Dust Collection Basics Handbook This book will guide you through all the steps in connecting your home shop dust control system. Tips on design, layout 6 “ Universal Dust Hood and construction. A must read book if you want total dust Fits over a 4-1/2" hole and can be adapted to many control in your shop! 60 pages. Softcover. woodworking tools. Use it on band saws, table saws, #W1050 ...... $ 5.95 shapers, sanders, etc. A very cost effective way of solv- ing a messy problem. Outlet diameter is 4". #W1010 6-1/4” x 6-1/4” Overall size ...... $ 5.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 40

Shop Accessories Brass Hammers Stanley Chisels Beautifully polished brass hammers provide mass for friendly • Extra long, shatter resistant handle persuasion, yet won’t mark harder metals. Perfect for met- designed for balance and grip alworkers and machinists making delicate adjustments and • Heavy-duty strike caps are crowned for centering blows and durability • Precision ground cutting edge for woodworkers using wood handled chisels. • Blade and tang forged from one piece of high quality, cutlery grade #D2795 8 oz ...... $ 9.90 steel #D2749 16 oz ...... $ 17.00 • 9” overall length #D2750 32 oz ...... $ 21.90 #16-903 1/4” wide chisel ...... $ 8.65 #16-904 3/8” wide chisel ...... $ 8.95 Dead Blow Hammers #16-905 1/2” wide chisel ...... $ 8.95 #16-906 5/8” wide chisel ...... $ 8.95 Unlike rubber mallets, dead-blow hammers #16-907 3/4” wide chisel ...... $ 8.95 won’t bounce off your work. Sealed lead shot #16-908 1” wide chisel ...... $ 9.95 in the hammers head delivers all the kinetic #16-909 1-1/4” wide chisel ...... $ 10.95 force to the contact point. #16-910 1-1/2” wide chisel ...... $ 11.95 #D1085 16 oz ...... $ 13.95 #16-911 2” wide chisel ...... $ 13.95 #D1086 24 oz ...... $ 19.95 #D1087 32 oz ...... $ 24.95 Stanley Chisel Sets • Durable storage and #16-900 3-piece set includes 1/2”,3/4”, carrying case 4-Piece Nail Set & 1” chisels...... $ 26.95 #16-901 6-piece set includes 1/4”,1/2”, These case hardened nail sets are conveniently packaged 3/4”,1”,1-1/4”, & 1-1/2” chis- in sets of four tip sizes. Bright fluorescent colors identi- els ...... $ 56.95 fy which nail set is which and pretty much guarantees #16-902 9-piece set includes 1/4”,3/8”, they won’t end up lost. Tip sizes include 1/32”, 1/2”,5/8”,3/4”,1”,1-1/4”,1- 1/16”, 3/32”, and 1/8”. 1/2”, & 2” chisels...... $ 86.95 #D2530 ...... $ 5.95 Freud Chisel Made of premium chrome vanadium steel. Hardness of 50-60 Rc. Hardwood handles. 10” overall Sets length. In wooden case. 5-Piece Pin Punch Set #WC104 4-piece set includes 1/4”, This 5-Piece Pin Punch Set features center- 1/2”,3/4”, & 1 ” chisels ...... $ 59.95 less, ground tips and includes 1/8", 3/16", #WC106 6-piece set includes 1/4”,3/8”, 1/4", 5/16" and 3/8" punches. 1/2”,5/8”,3/4”, & 1” chisels. . . . $ 79.95 #WC110 10-piece set includes 1/4”, #D2261 ...... $ 7.95 5/16”,3/8”,1/2”,5/8”,3/4”,7/8”, 1”,1-1/4”, & 1-1/2” chisels. . . . . $ 129.95

6-Piece Scraper Amana 3-Piece Chisel Set Set The bevel edge chisel sets are made of high carbon tool steel. Blades are hardened, tempered, ground, honed and are black- Remove tool marks and oxide treated to prevent rust. Handles are made of high prepare wood surfaces for impact, virtually unbreakable polypropylene plastic.8”overall finishing better than length. sandpaper with this 6- piece scraper set. Includes fine, medium and heavy cutting rectangular #A-3380 ...... $ 12.95 scrapers, concave/convex scraper, gooseneck scraper and beveled edge scraper. To renew cutting edges, simply joint the edge flat with a file and burnish to form a slight hook angle. Two of the scrapers have rounded Cabinet Scrapers edges to prevent accidental “digging” in your work. Made from the finest steel. Ideal tool #D3294 ...... $ 10.95 for refinishers. Regular rectangle, curved on opposite ends, and the classic “gooseneck” shape. 3-piece set Burnishers includes 0.8mm rectangle, curved, and gooseneck scrapers. Burnishers are for sharpening hand and cabinet scraper blades. Both styles include handle and are approximately 9-1/2” in overall length. #520-5010 0.8 mm rectangle ...... $ 3.90 #520-5060 Curved ...... $ 5.20 #520-5080 Oval blade ...... $ 24.45 #520-5070 Gooseneck ...... $ 6.70 #520-5090 Round blade ...... $ 15.75 #520-5510 3-Piece set...... $ 15.70

Monday - Friday 41 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories

6-Piece Diamond Cutting Disc Set These 180 grit diamond cutting 3-Piece Wood Rasp Set discs can cut through steel, This 3-piece wood rasp set with rubber handles stone, glass or practically any- includes round rasp, flat rasp and half-round thing. Very useful for anyone rasp. Ideal for wood carvers. Aggressive teeth with a rotary grinder. Comes remove wood fast for any wood shaping need. complete with two arbors. 1/8” Rasps measure 12” overall. shank. #D2472 ...... $ 10.95 #D3113 ...... $ 9.95

40-Piece Mini Grinding Polishing Set 6-Piece Rasp File Set This set contains 20 assorted vitrified- bond aluminum oxide stones, including Sure-grip rubber handles make four different grits. Ten assorted cotton this 6-piece rasp file set a buffs and ten assorted rubberized abra- pleasure to use. Set includes sives complete this package. 1/8” round rasp file, square rasp file, shank. half-round rasp file, triangular rasp file, flat rasp file and tapered flat rasp file. Rasp files #D2698 ...... $ 29.90 measure 12-1/4” overall. #D3112 ...... $ 18.95 50-Piece Diamond Burr Set Large and small burrs in this set make it File Card and Brush possible to craft nearly every angle and shape that a project requires. Comes in a Clean rasps and files cut faster and save plastic case. 1/8” shank. 180 Grit. time. One side has a file card that quickly removes tough imbedded filings and the other #D2474 ...... $ 49.95 has stiff bristles. #D2658 ...... $ 5.95 20-Piece Mini Diamond Burr Set This set of 150 grit diamond burrs fea- 8-Piece Riffler Rasp Set tures just about every profile needed for most grinding and sharpening applica- For carving and working around tight areas, this Riffler Rasp tions including: ball, cone, taper and Set features eight double-ended profiles for just about any cylindrical. 1/8” shank. 150 Grit. shaping and profiling requirement. Aggressive tooth cut #D2471 ...... $ 8.95 removes wood fast and efficiently. Every woodworker needs a set of these. Each rasp in this set measures 7-1/2” long.

#D2476 ...... $ 8.95 10-Piece Diamond Burr Set Great for “roughing in”, these 150 10-Piece Needle Nose File Set grit burrs are built to withstand heavy pressure. This provides the rugged This needle nose file set with vinyl grip strength needed for quickly clearing handles includes ten profile shapes waste portions of a project. 1/4” including round, half-round, flat, triangu- shank. lar, knife-edge, square and oval. All tips #D2470 ...... $ 8.95 except the square nose flat file taper to a needle nose point for reaching into tight spots. Each file measures 7” long. Setting Tile Book #D2868 ...... $ 6.95 The author covers the many types of tile -- including natural stone. He explains tools, setting materials, preparation and layout. You'll also find detailed information on troubleshooting problems and making repairs. The traditional mortar-bed method is 6-Piece Needle File Set still covered, but easy-to-use backerboard and waterproofing membranes now get special attention. Byrne delivers all the This set includes an assortment of oval, basics tilesetters rely on...plus all the fresh ideas and innovative flat, half round, round, triangular and methods they need to do the job right. 260 pages. Softcover. square files with comfortable grips. Files #70209 ...... $ 19.95 measure 7” long. #D2252 ...... $ 5.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 42

Shop Accessories Virutex Double Edge Trimmer The Very Efficient Carpenter Basic framing for residential construction. Here's your chance to Trims both sides of the board simultane- become a more efficient carpenter. Larry Haun has been a pro- ously so you can cut your trimming time duction framer for more than 35 years and a teacher of appren- in half. For edges up to 1.5" or 40 mm tices for more than 20. In this book, Haun shows you, step by step, all the techniques he uses to frame a basic house, from lay- wide. For wider edges, it can be used ing down the sills to cutting the rafters. 213 pages. Softcover. as an independent one side trimmer. #70455 ...... $ 22.95 #AU-93 Double Edge Trimmer ...... $ 12.95 #AU-93B Set of replacement knives ...... $ 6.95 Windows & Skylights Installing, building, and renovating. If you plan to cut a hole in a Virutex Edge Trimmer perfectly good wall or roof, you'd better have sound advice on how to go about it. This collection of 25 Fine Homebuilding arti- Manual end trimmer. It allows a per- cles won't disappoint you. You'll learn how to choose the best fect, clean and high quality cut on all new windows, restring double-hung windows and install and build the corners of the board. No other fin- skylights. You'll also learn how to build shutters and window ishing operations are needed. frames and install casement, bay and arch-top windows. 112 pages. Softcover. Equipped with double sided blades. #70265 ...... $ 14.95 #RC21E ...... $ 37.50 Framing Floors,Walls, & Ceilings Hand Edge Banding Iron A solidly constructed frame is the key to a well-built house. These 27 articles from Fine Homebuilding will explain how to For edge banding pre-glued tapes. Features quick frame major building components, put up walls straighter and faster, build solid squeak-free floors, and how efficient planning heat up time, thermostat, wood handle and heat and layout techniques can save time and money. Tradesmen and resistant base. homeowners alike will build better using these framing tricks, #HI165 ...... $ 52.95 methods and solutions. 144 pages. Hardcover. #70656 ...... $ 14.95 Extension Roller Great for installing laminate, carpet, counter Smart Business for Contractors tops, sheer vinyl, wall You are a contractor. You know your trade, and you're good at it. But panels and veneer. what about the unique financial and legal concerns of running a con- Three 2-1/4” rubber struction business? Do you have the right tools for dealing with money and the law? Attorney Jim Kramon provides all the informa- rollers for dependable tion you need to turn your hard work into greater financial security. traction and 7-1/2” of non-marring coverage. Sturdy cast handle for 208 pages. Softcover. increased leverage. Extends from 20” to 35” with twist locking action. #70538 ...... $ 19.95 #D3211 ...... $ 24.95 Foundations & Concrete Work Edge Roller Essential information from builders, masons, and engineers. Whether you are planning to build a new foundation, shore up an Features two 1-3/16” perpendicular mounted old foundation, or pour a new driveway, this book will provide you rollers. Perfect for gluing tight edges on lami- with the professional guidance you need to do the job right. In nate and veneer projects. Hard plastic rollers these collected articles from Fine Homebuilding magazine, profes- will not scratch most surfaces. Ergonomic han- sional builders, masons, and engineers show you how. 144 pages. Softcover. dle is designed for a sturdy grip. #70459 ...... $ 14.95 #D3215 ...... $ 9.95 Encyclopedia of Construction Methods & Materials Pressure Roller For veneer or plastic laminate. 3” x 1-1/2” black rubber roller. Two vinyl Inside this gigantic manual, with more than 900 diagrams, illustra- ribbed grips. 1/2” zinc plated steel tions and photos, and over 600 pages of information, are all the major methods of construction, following professional classifications. handle. Hundreds of topics extend from general requirements so important for architects, engineers, and contractors; through analysis of building #JR3 ...... $ 11.95 sites; to the mechanics of fire protection, plumbing, valves, insula- tion, and refrigeration. In-depth studies cover construction materials and special construction. 608 pages. Softcover. “J”Rollers #6851-6 ...... $ 24.95 Designed for applying pressure on veneer and Inspecting a House plastic laminates. Reaches into corners as roller In this heavily illustrated guide, master plumber, electrician and has no axle projection on one end. Stainless inspector Rex Cauldwell offers insights from his years of experience, steel or polyethylene roller. presenting a rational sequence of inspection so that nothing gets missed. Whether it’s an overloaded electrical panel, a driveway that #19595 1-1/2” wide poly roller ...... $ 14.95 sends water into the basement when it rains, or a gas furnace that’s #19596 1-1/2” wide steel roller ...... $ 24.95 improperly vented, Cauldwell shows you how to spot and evaluate #19597 3-1/2” wide poly roller ...... $ 15.95 areas of concern. 272 pages. Softcover. #19598 3-1/2” wide steel roller ...... $ 33.95 #70569 ...... $ 24.95

Monday - Friday 43 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories 4-Piece Spatula Set Barber Scissors This 4-piece spatula set features eight Polished brass finger loops and preci- different tip profiles for scraping and sion ground matte steel finish cutting shaping a variety of materials. Knurled edges make these scissors highly dec- handles provide excellent grip control. orative and functional. Blade length is 2-3/4” and overall length is 7-5/8”. #D3235 ...... $ 9.95 #D3223 ...... $ 8.95 4-Piece Dental Pick Set Utility Scissors This stainless steel Dental Pick Set is perfect for a variety of uses around the These all-purpose scissors are perfect in shop - whether restoring cut threads or the school, home or shop. Offset han- fine scribing. Each pick features two dles make shearing paper and fabric a different pick styles, a knurled handle breeze. Blades measure 3-1/8” and and measures 6-1/2” long. scissors measure 8-1/2” overall. #D3226 ...... $ 1.95 #D3228 ...... $ 4.95 All Purpose Utility Scissors Magnifying Tweezers Not just for the kitchen. Large finger loops, Three-X magnifying glass and needle-tipped ultra sharp cutting edges and curved plier tweezers combine to make this one of the jaws make these handy Utility Scissors ideal handiest items in the tool box or first aid kit. for the shop too. Blades measure 3” and scissors measure 8-1/2” overall. #D3234 ...... $ 4.50 #D3223 ...... $ 8.95

6-Piece Tweezer Set Smith & Wesson® Mag Tool This 6-piece stainless steel tweezer Without a doubt, the best multi-tool set includes every shape and size around. Aside from its superior quality, needed for the workshop including the 44 Mag Tool is the only one to feature blunt tip, tapered point, fine-tipped, a diamond file. Features: needlenose pli- bent and reverse action. Sizes range ers, wire cutters, crimpers, scissors, bottle from 5” to 6-3/4” long. opener, can opener, 1/8", 3/16", 1/4" straight & Phillips type screwdrivers, diamond file, awl, lanyard, #D3288 ...... $ 12.95 regular blade, serrated blade and criss-cross saw. Deluxe Cordura sheath included 5-Piece Spatula Set #SW1010 ...... $ 29.95 These variously shaped spatulas are ideal for cleaning up glue Smith & Wesson® Tool Chest II Multi Tool squeeze-out, applying wood putty and spreading glue and This 24-function Multi Tool features so thicker epoxies. Each blade has many tools, it's just like having a tool a different degree of flexibility chest on your belt. Includes 11 screwdriv- for unsurpassed control. Great for finishing and refinishing too. er bits and Cordura nylon sheath. Includes: Needlenose pliers with wire cutter, 3/16" #D3168 ...... $ 9.95 Straight screwdriver/bottle opener, Scissors, File, Dual scale ruler, Can opener/awl, Phillips screwdriver, Drop point blade, Hex bit holder/1/4" socket. Slickplane #SW1057 ...... $ 24.95

Our Slickplane produces an exceptionally smooth 1/8" radius or a 45° chamfer over the Complete Book of Wood Joinery entire length of an edge. Crafted from rock maple, the Slickplane is designed to fit com- Learn the joinery techniques that are essential to fine woodworking, fortably in your hand. A brass sole glides easi- including butt joints, dadoes and grooves, rabbet, miter, lap, mortise-tenon, edge-to-edge, dovetail, and many more. Practice by mak- ly along the workpiece edge as two independ- ing a variety of pieces, such as a built-to-last bedroom chest, book- ently adjustable carbide-tipped cutters apply the finishing touch. case, kitchen base cabinet, trestle table, pedestal table, dining chair, and rocking chair. 320 pages. Softcover. #W1100 Slickplane w/ radius cutter...... $ 15.95 #9950-0 ...... $ 17.95 #W1101 Pair carbide radius blades ...... $ 7.95 #W1102 Pair carbide chamfer blades...... $ 7.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 44

Shop Accessories

SharkSaw® Super FineCut Saw SharkSaw® Dowel Cutting Saw This saw features the This very flexible saw is made thinnest blade for flush cutting of dowels and (kerf 0.004”) of the woodworking plugs. The extremely fine tooth-pitch (26 per inch) makes for entire SharkSaw line, and an ultra-smooth cut; it’s ideal for precision joinery like dovetails, small is supported by a spine for stability. With its extremely small tooth set moldings, and picture frames. It can also cut through small plastics. (19 tpi), this saw can make exceptionally smooth, fine cuts in a variety of woods. Specifically, it’s great for cutting through extremely hard woods such as #10-2204 6-1/2” Dowel cutting saw ...... $ 12.75 oak, ebony, and exotic imported species such as ironwood. #01-2204 Replacement blade ...... $ 8.75 #10-2410 10-5/8” Super fine cut saw...... $ 22.20 #01-2410 Replacement blade ...... $ 15.95 Dowel Cutting Saw High carbon, spring steel saw blade and zero edge SharkSaw® Fine Cut Saw set makes flush cutting a breeze. This Japanese This saw combines the style saw cuts extremely fast on the pull stroke for character of the 14 pt unsurpassed control and 26 teeth per inch produce General Carpentry Saw a fine finish that requires little or no sanding. with the FineCut saw. It cuts fast, yet it’s smooth enough for fine woodwork. It handles like the Super FineCut Saw (10-2410), but with a #D2055 ...... $ 9.95 15 pt (teeth per inch) pitch that can accommodate most hard and soft woods. It’s also great on plastic pipe. SharkSaw® Drywall Saw #10-2420 10-5/8” Fine cut saw ...... $ 18.95 The SharkSaw drywall #01-2420 Replacement blade ...... $ 13.50 saw is the only SharkSaw that cuts on the “push.” With its stiff, sharply point- ed blade, it easily plunges through dry- SharkSaw® Miter Saw wall, while its push-to-cut design eliminates tearing of drywall paper on the This saw is designed exposed side. 7 teeth per inch. especially for manually- #10-2206 6” Drywall saw ...... $ 11.50 operated miter boxes. The 14” blade has 18 teeth/inch, for a smooth, fine cut, with a narrow kerf for minimal stock removal. It’s designed to make degree SharkSaw® General Carpentry Saw cuts in all types of wood moldings (from crown moldings to intricate decorative ones). Sawing is so smooth, that sanding is often not required. It This is the best all- also makes a great general carpentry saw and also cuts cleanly through plas- around saw for profes- tic pipes such as PVC and ABS, up to 10” in diameter. sionals and do-it-yourselfers alike. With 14 #10-2210 14” Miter saw ...... $ 18.75 teeth per inch, it cuts very fast and smooth. This is the best saw for tackling the widest range of projects: everything from rip and cross- SharkSaw® General Carpentry Saw cut to flush-cutting moldings and door casings even slicing through PVC or ABS pipe. And at 18” overall length, it fits into most tool boxes. This is the bar-none best saw for dimensional #10-2312 12” General carpentry saw ...... $ 18.25 lumber, thick plywood and #01-2312 Replacement blade ...... $ 12.30 wallboard and treated lumber of all sizes. You’ll be amazed how easily and smoothly it carves through PVC and ABS pipes. Because it’s a pull-to-cut saw, undercut- English Dovetail Saw ting (that is, cutting from the bottom up) is a snap - quite the opposite of This 8” blade dovetail saw traditional push-saws! 10 teeth per inch. has a very fine nineteen teeth #10-2315 15” General carpentry saw ...... $ 23.40 per inch configuration. With #01-2315 Replacement blade ...... $ 15.85 the premium high polished brass back, this saw makes cutting dovetails and other small joints a pleasure. SharkSaw® Fine Cut Double Saw #645-1000 8” blade, 19 TPI ...... $ 22.50

Freud Mini Brass Back Gents Saw An excellent jamb saw! This is the traditional Japanese saw. The Fine Cut This saw has very small, fine Double Saw has cross cut teeth (17 per inch) to work across the wood grain, teeth, ideal for light intricate and rip teeth (9 per inch) to cut with the grain. This unique Japanese bench work. The back of the design has been used to build everything from houses to castles to shrines. blade is ground thinner to Although the blade is very flexible, it cuts exceptionally straight. It is reduce the risk of blade bind- designed for applications where precision outweighs speed. Many profes- ing. This also reduces “set” so you will get a finer cut with less effort. 15 sionals use this tool as a jamb saw for cutting door moldings and casing teeth per inch, 6” blade length. coverings. $ 13.95 #10-2440 9-1/2” Double cut saw ...... $ 21.95 #GS006 ...... #01-2440 Replacement blade ...... $ 14.25

Monday - Friday 45 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories HVLP Spray Gun with Regulator Deluxe Tool Belt with Padded Suspenders Nothing compares to an HVLP spray gun This tool belt features deep pockets, gener- when it comes to applying professional look- ous padding, ballistic nylon construction, ing results. This spray gun features an air sturdy metal buckle and ergonomic shoul- adjusting valve, an external regulator, a der straps. Also features quick-release 1.4mm nozzle, and a corrosion resistant metal clips for tool pouches and shoulder chrome finish. Regulator comes with an straps. 16 pockets, 10 pencil/tool sleeves easy to read dial and 1/4” NPT and 4 holsters (3 ballistic nylon and 1 ham- connections. mer holster. #D3274 HVLP gun ...... $ 54.95 #D3267 ...... $ 64.95 #D3279 Regulator only . . . . . $ 16.95

Professional’s Tool Organizer Air Filter / Regulator / Lubricator This bag features 43 total pockets (6 of which are completely This combo unit is great for controlling air closable), a steel reinforced han- pressure, trapping moisture and cleaning air in dle, hammer / attachment loop, pneumatic systems. 150 PSI maximum pres- removable belt pouch and sure. Locking control knob and an easy to adjustable shoulder strap. read pressure gauge. Also includes a micro-fog Constructed of ballistic nylon lubricator and a handy wall mounting bracket. with stitched and riveted seams. Not for use with spray guns. Accepts 1/4” NPT fittings. #D3289 ...... $ 39.95 #D3272 ...... $ 32.95 Handy Shop Bag Air Hoses These air hoses are ideal This little shop bag is packed with big fea- for keeping work areas tures like 11 deep pockets, 10 pencil / neat and tidy. D3285 tool sleeves, large padded handles, heavy- has 25’ of high quality duty zipper and ballistic nylon construc- retractable hose that has tion. Interior measures 8”W x 13”L x been pressure tested to 10”D when unzipped and fully opened. 250 PSI. Hose connec- #D3268 ...... $ 14.95 tions are 1/4” NPT. #D3283 25’ Coil Hose ...... $ 3.95 #D3284 50’ Coil Hose ...... $ 5.95 Deluxe Shop Bag #D3285 25’ Retractable Air Hose ...... $ 69.95 Perfect for the mobile craftsman who has a tool for everything. The deluxe 17-Piece Air Accessory Kit shop bag features 18 easy access pockets, ballistic nylon construction, This 17-piece kit includes pressure huge carrying capacity and an option- gauge, inflating nozzle, two gun tips, al shoulder strap that quickly clips inflating needle, dual tire chuck, four on or off. Interior measures 9-1/2”W x 17”L x 12”D when male quick connect coupler nipples, unzipped and fully opened. two female quick coupler nipples, two nipples, blow gun, couplings and quick #D3269 ...... $ 24.95 release coupler. 1/4” NPT fittings. #D3287 ...... $ 16.95 Shop Apron Blow Guns Perfect for cleaning dust This bib-style apron protects the front torso and dirt from nooks and from dust and chips and provides numerous crannies as well as blowing handy pockets for holding tools, nails, pencils #D2908 and hardware and two hammer loops. Made off solvents after cleaning from ballistic nylon, this apron is fully parts for assembly. Heavy- adjustable for one-size-fits-all convenience. #D3280 duty guns feature solid #D3115 ...... $ 12.95 die-cast construction and (Heavy-duty) are rated at 180 maximum PSI. 1/4” NPT. #D2908 Angled nozzle blow gun ...... $ 5.50 #D3280 Heavy-duty gun 1” nozzle ...... $ 4.95 #D3281 Heavy-duty gun 4” nozzle ...... $ 5.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 46

Shop Accessories Adhesive-Backed Measuring Tapes Depth Gauge This 6” depth gauge makes precise depth Precision steel, ready to mount on cut-off measurements and fences, table saws, or work benches. Tapes features a knurled lock can be easily cut to shorter lengths. In 6’ or down screw, 1/32” 12’ lengths, 1/2” or 3/4” wide, reading left- measuring increments with easy-to-read vernier scale and a to-right or right-to-left. wide 3-1/2” base. Steel body makes this a pleasure to use. #79-056 12’R 1/2” Metric/English ...... $ 14.19 #D2800 ...... $ 13.00 #79-057 12’L 1/2” Metric/English ...... $ 14.19 #79-061 12’R 1/2” English ...... $ 14.19 #79-062 12’L 1/2” English ...... $ 14.19 #79-065 12’R 3/4” English ...... $ 19.00 Dial Indicator and Magnetic Base #79-066 12’L 3/4” English ...... $ 19.00 Dial indicators are a necessity in any shop - woodwork- #79-068 6’R 3/4” English ...... $ 13.00 ing and metalworking alike. Use them with magnetic #79-070 6’L 1/2” English ...... $ 10.50 bases for measuring runout, setting up tool and checking alignment. Magnetic base has a very strong mag- Precision Stop Block net that is easily activated with a convenient switch. Ideal for cutting multiple pieces to the Mounts at any angle and has a fine adjustment arm. same size, this stop block also eliminates #D1057 1” travel x .001” indicator . . . $ 14.95 marking and adjusting the workpiece to #D1058 Magnetic base ...... $ 20.50 the saw blade when cutting single pieces. Features left and right side magnified hairline cursors. Works with fences from Stainless Steel 1-1/2” to 2” wide. Does not include adhesive-backed measuring tape. Ruler #W1109 Dual pointer precision stop block ...... $ 49.95 Measure with absolute precision using this 12” stainless steel ruler with increments as fine as 0.5mm and 1/64”. 6”Dial Caliper #D2828 ...... $ 1.95 Precision caliper can measure small part sizes and thickness Steel Hook of everything from lumber to a sheet of paper. One-hand- Rulers ed operation provides inside, outside and depth measurements in precise .001" increments. Comes in a protective case. Available in 12”, 18” and 24” lengths, these hook rulers make easy work of edge alignment. Measuring in increments of 1/16”. #D1052 6” Capacity dial caliper ...... $ 34.95 #D2825 12” hook ruler ...... $ 3.75 Fractional Dial Caliper This stainless steel fractional dial #D2826 18” hook ruler ...... $ 4.95 caliper combines the same precision #D2827 24” hook ruler ...... $ 6.95 that metalworkers are accustomed to with a fractional scale for woodworkers. Perfect 24”Aluminum Ruler with Handle for measuring board thickness, depth and inside measurements. Dial reads 64ths and .01”. Six inch capacity.

#D3208 ...... $ 39.95 This multi-purpose ruler measures, levels, plumbs and provides a safe cutting edge, so hands and fingers are away from the cutting blade. Vernier Caliper Use this high quality 6” Graduations are in inches and millimeters / centimeters. caliper to measure thick- #D3197 ...... $ 9.95 ness, inside and outside diameters and depths in 1/32” increments with easy-to-read vernier scale. Thumb stud 24”Aluminum Ruler and lock down screw ensures accurate readings every time. Steel construction makes for a long lasting tool. #D2801 ...... $ 13.00 Use this aluminum ruler for all basic measurement needs. Machined to Brass Caliper exacting standards, this ruler will provide years of precise measurements. Increments of 1/16” make this a truly versatile and precise tool for any Solid brass 4” caliper with workshop. sliding dovetail way and rigid construction make this measuring instrument indispensable for any craftsman. Small size is #D2836 ...... $ 8.95 perfect for the tool box or a pocket. Measuring range is 0 to 4”/100mm in 1/16” or 1mm graduations. Includes vernier scale. #D2732 ...... $ 5.00

Monday - Friday 47 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories Aluminum Squares Plastic Protractor These high-precision aluminum Measure any angle, bevel or slope. Long arm is 5- squares are perfect for square 3/4” and the short is 3-1/4” long. Easy to read layouts and machine set-ups. scale with brass knob to lock in any position. Each square features a heavy- duty beam and beveled scale #19070 ...... $ 7.95 with inside and outside graduations. Empire Heavy-Duty Professional #D3068 10” Aluminum square ...... $ 9.95 Combination Square #D3069 12” Aluminum square ...... $ 12.95 #D3070 18” Aluminum square ...... $ 14.95 • Use for making accurate 90° & 45° #D3071 24” Aluminum square ...... $ 18.95 markings, measuring and checking depth • 12” stainless steel blade with 1/8”, 1/16”, 1/32” graduations Precision Machine Squares • Machined square head • Full view vial • Self-aligning drawbolt • Hardened scriber Precision made and ground, these are square inside and out. Both blade and #0250 ...... $ 11.95 stock are ground for straightness and accuracy. Trammel / Circle Marking Set #885-1002 2” Engineers square ...... $ 11.25 #885-1004 4” Engineers square ...... $ 11.50 For laying out large circles, this trammel/circle #885-1006 6” Engineers square ...... $ 14.50 marker set offers unsurpassed control and accuracy. Each trammel point with steel point or replaceable lead is fully adjustable. Includes a Incra Guaranteed Squares & 45°s 12” stainless steel ruler and extra lead. #D2331 ...... $ 15.95 Incra’s new line of precision squares and 45°s are so accurate, they guarantee them! The innovative one-piece design uses the most advanced manufacturing methods available to Wheel Marking Gauge carve out a single, monolithic blade / handle This simple, yet effective marking gauge body from a solid slab of hardened aluminum. has a single bevel edge wheel that scribes The hefty construction of the 1/4” solid alloy a fine line without tearing the wood fibers body and the 3/4” thick integrated alloy handle and does not wander with the woods just feels right in the palm of your hand. The grain. Precision ground brass shoe glides 45° unit can double as a square. against the edge of the workpiece and the knurled brass knob makes adjustments quick and easy. 8” long. #GSQR5 5-1/2” square ...... $ 36.95 #GSQR7 7-5/16” square ...... $ 45.95 #D2822 ...... $ 9.95 #G455 5-1/2” 45° ...... $ 36.95 #G457 7-5/16” 45° ...... $ 45.95 Marking Gauge Highest quality rosewood has brass wear strips on Rosewood Try Squares the rubber face. One side is for marking mortises and has a sliding adjustment mechanism. The Made from the best quality rosewood other side has a single pin which allows the tool and tempered steel blades, these squares have a brass face for to be used as a traditional marking gauge. Also protection against damage and wear. The blade is securely held features a knurled brass thumbscrew for locking the gauge in place. by steel rivets with surrounding inlayed brass plugs. #20150 ...... $ 26.95 #20130 4” Rosewood square ...... $ 14.95 #20135 6” Rosewood square ...... $ 19.95 #20140 9” Rosewood square ...... $ 22.95 Mite-R-Gage Take the guesswork out of angles. Fully rota- tional through 360° , the Mite-R-Gage uses Combination Square Set two legs that allows you to measure both inside and outside angles, transfer exact This set is great for the woodworker and angles direct to stock, check corners for includes square, center, and protractor squareness or set alignment of radial arm or table saw. It can layout simple heads on a 12” blade. or compound miters. Overall length of each leg is 11-1/2”. #630-4200 ...... $ 40.60 #605-1250 ...... $ 24.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 48

Shop Accessories

Contour Gauges Stabila Torpedo Level with Adjustable Vial Professional contour gauge with plastic pins is ideal for joinery work, fitting tiles, carpets, • Reads plumb, level, and 360 deg linoleum, etc. Two gauges can be combined for a (P-L-360). longer length if necessary. • Protractor vial (tolerance +/- .5 deg) duplicates angles in percent or degrees. #800-2510 Plastic contour gauge ...... $ 9.90 • Protractor vial reads in 2 deg increments. #837 Contour gauge w/ steel pins. . $ 8.15 • Patented, epoxy-locked vial system never needs adjusting. • Full-length magnetic strip recessed in the measuring surface. • Two crystal clear, non-fogging, unbreakable, monoblock, acrylic vials (one Miter Squares horizontal and one vertical). • Certified fixed vial accuracy: (1/16" over 72") Finely made tools which are extremely use- #21999 10” Torpedo level ...... $ 21.95 ful for layout and machine setup. The miter square (shown) checks 45° or 135° angles. The combination square adds ninety degree capability Stabila Torpedo Level and useful markings. #730-1050 Miter only square...... $ 11.00 #730-1060 Combination 90° / 45° square...... $ 19.25 • Heavy-duty, die-case frame is virtually indestructible. • Certified Level Accuracy; in top read position: (1/32" over 72"). • Strongest magnets - Work Hands-Free. Sliding T-Bevel • Patented, epoxy-locked vials never need adjusting. Adjustable to any angle, use this fine tool for marking • Two crystal clear, non-fogging, unbreakable, monoblock, acrylic vials (one or checking angles. The stock is made of rosewood horizontal and one vertical). with brass fittings, while the tempered steel blade is #25100 10” Torpedo level ...... $ 26.95 secured by a brass locking lever for easy thumb control. Ear Muffs #605-3150 7-1/2” T-Bevel...... $ 25.85 #20125 10” T-Bevel...... $ 23.95 • Durable and lightweight design • For use on top of head, behind the head, or below the chin Angle Divider • Noise reduction rating 22 dB This tool makes it easy to divide an angle #CP665 ...... $ 10.25 in half for accurate mitering as well as transferring angles from 10° to 170°. Makes finish carpentry significantly easier and faster. Commonly used angles are Classic Ear Plugs marked for ready reference. • Soft, form fitting foam that gradually takes the shape #19050 ...... $ 9.95 of the ear canal for superior prolonged comfort and protection Safety Ear Muff & Eye Protection • Noise reduction rating 29 dB

• All-in-one hearing and eye protection #M6800 One pair ...... $ .25 • Clear lens tested in accordance with ANSI Z87.1-1989 • Noise reduction rating NRR 26 dB • Blue with red brow bar lens Dust Masks #OM-77L Optimuff ...... $ 29.95 • For use with nuisance level dusts below the PEL • Provides relief and protection from nuisance dusts Shop Fox Safety Glasses such as animal dander, pollen and other nuisance level dusts at exposures below the OSHA Permissible Exceeding ANSI Z87.1 - 1989 standards for Exposible Limit impact resistance, these safety glasses offer #CP1000VP Package of 50 ...... $ 7.95 outstanding eye protection and stylish good D2675 looks. Wrap-around side shields provide additional protection and a wide field of view. Safety Filter Mask Model D2676 features easily adjustable ear The safety filter mask provides greater pro- pieces for length and comfort. tection over paper filters with its formfitting #D2675 Metal Frame...... $ 7.90 cloth seal. Ideal for dusty shop and work #D2676 Adjustable Frame . . . . . $ 5.90 environments. One size fits all. D2676 #D2759 ...... $ 1.50

Monday - Friday 49 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories Diamond Honing Cone Knife Hone & Guide This diamond honing cone is the perfect With this handy sharpener, you will be able to hone sharpening tool for radius carbide tipped router your jointer and planer knives to razor sharpness bits and shaper cutter and steel carving without removing them from the machine! Great for gouges. Great for keeping fish hooks sharp too quick touch-ups and extends the period between with its special fish hook groove. Lanyard hole major re-sharpening. makes it easy to keep this item handy around #D1123 ...... $ 8.95 the shop or favorite fishing hole. 400 grit. #D2473 ...... $ 5.95 5-Piece Carving Chisel Set These razor sharp carving chisels Diamond Knife Sharpeners are designed to be used by hand pressure alone. Ergonomic han- These diamond knife sharpeners are the most dles have no-slip thumb and fore- efficient tools for putting a keen edge on all finger grips for unsurpassed con- non-serrated knives. Round profiles ensure a trol. Set includes: 1/4” straight, single point of contact with the blade and a 1/4” skew, 1/8” vee, 1/8” gouge, long sweeping motion during sharpening pro- and 1/4” gouge. Overall length of vides uniform results. each chisel is 5-3/4” #D2489 ...... $ 6.95 #D3081 5” sharpener ...... $ 19.95 #D3082 10” sharpener ...... $ 29.95 12-Piece Carving Chisel Set Water Stones Complete Carving Chisel Set features Japanese Waterstones are great to keep tool beech wood handles edges sharp -- woodworkers of all skill levels with steel ferrules. are turning to them. This is because water- Set includes: 6mm stones cut more aggressively, and a sharp straight, 12mm edge can be achieved much faster. Waterstones straight, 10mm V- also polish as they hone, allowing a mirror finish without the need for stopping tool, 6mm right or polishing compounds. Only water is needed to lubricate the cutting edge. skew, 6mm double #D1067 800 grit ...... $ 19.95 skew, 8mm gouge, 10mm gouge, 14mm gouge, 6mm spoon, 6mm bead- #D1069 1200 grit ...... $ 22.95 ing, 6mm round nose, 6mm V-groove and a leather roll-up pouch. Each #D1070 6000 grit ...... $ 43.95 chisel measures 7-1/2" overall. #D1130 1000 / 6000 grit ...... $ 33.95 #D2227 ...... $ 49.95 Honing Guide Shop Fox Mallets A clever yet simple tool for holding a chisel or plane These round head mallets feature a tough blade at the proper angle. Moves on a hardened urethane 360° striking surface that is non steel roller. Honing guides ensure the perfect bevel marring and very quiet to use. Urethane angle every time for keeping a sharp edge. also provides plenty of mass for tough #D1044 ...... $ 8.95 carving operations. The finely sanded maple handles are turned to yield a comfortable grip for all day use. Honing Guide #D2805 12 oz ...... $ 19.00 #D2807 20 oz ...... $ 21.90 Rubber body keeps sharpening stones #D2808 30 oz ...... $ 23.90 from sliding around the benchtop during honing. Chrome plated hardware resists rust when using waterstones. Adjusts from 5-1/2” to 9” to fit a wide range of stone sizes. Brass Head Mallets #D1091 ...... $ 12.95 These brass head mallets provide unequalled control and balance in a compact design and are a real extension of the craftsman’s Sharpening Kit hand. Turned and polished brass heads are Oilstone Sharpening Kit is an all-in-one kit that joined to finely finished maple handles to handles most woodworkers' honing chores. create the true essence of form and function. Includes 8" combination (coarse/medium) #D2809 8 oz ...... $ 9.90 aluminum oxide stone, our #D1044 honing #D2810 12 oz ...... $ 11.90 guide, a 1 oz. bottle of honing oil and a special non-slip rubber pad. #D1118 ...... $ 16.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 50

Shop Accessories Industrial-Use Vinyl Gloves Foam Brush Sets Industrial-Grade Gloves protect Disposable and ideal for all water and oil hands from paints, stains, and irri- based stains and finishes. Brushes feature tating cleaning solvents. Also great either wood or plastic handle for unsurpassed for other messy chores, such as control. Use 3/4” brushes for detailing and automotive or farm work. Each dis- small touchup work. penser box contains 100 gloves #D2031 24-Piece Foam Brush Set which are powdered to make them with wooden handles easy to put on and remove. includes 10 - 1" brushes, #D2028 Medium Size ...... $ 9.95 8 - 2" brushes and 6 - 3" #D2027 Large Size ...... $ 9.95 brushes. Poly bagged. $ 7.95 #D2490 24-Piece Foam Brush Set with plastic handles Glue Spreader Kit includes 10 - 1” brushes, 8 - 2” brushes and 6 - 3” brushes. Blister card packaging...... $ 5.95 Apply you adhesive with pinpoint precision into #D2024 50-Piece Foam Brush Set with wooden handles dowel holes, finger joints, dovetail joints, board includes 20 - 1” brushes, 20 - 2” brushes and edges, etc. Eight different nozzle attachments 10 - 3” brushes. Conveniently boxed ...... $ 11.95 for a wide variety of application needs. Also #D3247 50-Piece 3/4” Foam Brush Set with wooden han- includes a wide roller head for edge and face dles for small detail or touchup work ...... $ 6.95 gluing applications. #19119 ...... $ 19.95 150-Piece Mega Brush Set Glue Injector Kit This Mega Brush Set includes 50 foam brushes with wooden 3-piece kit of plastic construction. These injectors handles, 50 bristle brushes can be used over and over again. Also useful for with wooden handles and 50 grease, oil, etc. glue brushes in assorted sizes. #320-2000 ...... $ 3.50 Ideal for quick painting, stain- ing and finishing jobs, as well as spreading glue, flux and Plastic Glue Bottle pipe dope, the convenience factor alone makes this set one of the best deals around. If you use a lot of glue, save money by buying in bulk and transferring in to this #D3105 ...... $ 29.95 smaller container. #17820 ...... $ .95 50-Piece Bristle Brush Set Inexpensive enough to throw away Glue Roller Bottle when finished, saving time and messy The wide roller dispenses glue evenly and clean-up with water or chemical sol- uniformly to a wide variety of surfaces. vents. These solvents eventually end Works very well for gluing large surfaces and up as costly waste. Ideal for all paint- works even better for edge gluing lumber. ing chores. Includes 5 - 1/2" brush- #19044 ...... $ 6.95 es, 20 - 1" brushes, 15 - 2" brushes and 10 - 3" brushes. Gorilla Polyurethane Glue #D2025 ...... $ 17.95 Gorilla Glue is the strongest and most versatile glue on Glue Brushes the market today. It takes just an ounce of Gorilla Glue to cover one square foot. Formulated for indoor and out- Great to have around the shop. door use. In addition to being 100% waterproof, stain- Inexpensive enough to be disposable yet able, paintable and incredibly strong, Gorilla Glue bonds can be used over and over by simply clean- wood, stone, metal, ceramics, Corian®, styrofoam and ing after each use. Made from pure lack more. Long open working time. Remember that this horsetail bristle, set in a handle with a glue will foam 3 to 4 times its applied size, so a little bright, tin-plate finish. goes a long way. #130250 1/4” glue brush ...... 4 for $1.00 #50002 2 ounce bottle ...... $ 4.99 #13030 1/2” glue brush ...... 4 for $1.00 #50008 8 ounce bottle ...... $ 12.99 #D2026 50 piece assorted ...... $ 9.95 #50018 18 ounce bottle ...... $ 19.99

Monday - Friday 51 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories Franklin Hi-Purformer Advanced Bonding System “Hot Shot”Instant Glues Polyurethane hot melt tech- Very fast acting, these adhesives will bond just nology is not new to the about everything. Carefully read the descrip- adhesive industry. In fact, tions below and select the adhesive that will polyurethane hot melts have best suit your needs. We also offer a sampler been successfully utilized for package below. many different applications for several years. They com- The Original “Hot Stuff” - Bonds to clean and smooth surfaces. Use in any bine the positive attributes place a thin viscosity fast setting glue is required, such as chair joints that are found in various, unique loose. Setting time is incredibly fast at only 3 to 10 seconds. (Red label) adhesive technologies and deliver them in a single product. Polyurethane #WHS1 1 oz ...... $ 6.40 hot melt adhesives outperform traditional hot melts, offer a faster set than #WHS2 2 oz ...... $ 11.10 yellow glues, and provide a more permanent, less brittle bond that super #WHS4 4 oz ...... $ 21.10 glues. In addition, this technology provides a strong, waterproof bond which reduces the need for clamping or bracing and works on most common woodworking and construction materials. Kit includes cartridge gun, cartridge “Super T”Glue - is the general purpose version. Its medium viscosity base (charger), 3-adhesive cartridges, & carrying case. and drying time allows some alignment and assembly time. For filling small gaps between the surfaces to be bonded. Setting time is 10 to 15 #1341 Hi-Purformer kit ...... $ 99.95 seconds. (Yellow label) #1301 30 second set, wood to wood adhesive cartridge . . . $ 6.80 #1311 60 second set, wood to wood adhesive cartridge . . . $ 6.80 #WSUT1 1 oz ...... $ 6.40 #1301 75 second set, multi-purpose adhesive cartridge . . . $ 6.80 #WSUT2 2 oz ...... $ 11.10 #WSUT4 4 oz ...... $ 21.10 Shop Fox Glue Guns “Special T”Glue - For filling large gaps and a longer open time. It is excellent on very porous surfaces or where complete alignments and assembly is Made from high impact injection molded required. Setting time is about 20 to 50 seconds. (Green label) plastic, these guns feature comfortable trigger action, attached wire stand and fast heat #WST1 1 oz ...... $ 7.25 glue tip. #WST2 2 oz ...... $ 12.20 #D2484 40 Watt glue gun...... $ 8.95 #WST4 4 oz ...... $ 23.35 #D2485 60 Watt glue gun...... $ 11.95 #D2487 12 pack glue sticks . . . . $ 3.95 “Hot Shot”Surface/Joint Cleaner & Accelerator Ideal for removing trace oils or waxes from cracks before gluing. It also acts as an instant-setting agent for “Hot Stuff” glues. Only a very small amount of accelerator is Drawer Slide Boring Jig needed. Use on oily woods such as teak to prepare the surface for gluing. Take away the guesswork and layout #WNCF2M 2 oz ...... $ 6.65 process from drawer slide installation #WNCF5M 5 oz ...... $ 11.10 with this universal Drawer Slide Boring #WNCF18M 18 oz refill ...... $ 39.95 Jig. Handles our full range of Drawer Slides from 10” long to 26” long.

Ultra Super Solvent - Removes adhesives from hands, workpiece or #D3170 ...... $ 12.95 wherever the glue was not meant to be. #WUS2 2 oz ...... $ 6.65 Shelf Support Boring Jig “Hot Shot”Replacement Tips - Sold per pack of 2 tips. Make standard in-line shelf support layout and #WS2 ...... $ 2.20 drilling easy with this Shelf Support Boring Jig. Made for drilling 5mm holes. Requires a 5mm “Hot Shot”Sampler Packs - Each kit includes all three glues, 3 oz. of (13/64”) drill bit and depth stop. Accelerator, 2 oz. Solvent, 2 spouts with caps and the applicator tubing. #D3171 Boring Jig ...... $ 12.95 Order by the glue size you desire. #BP-5MM 5mm HSS brad point bit . . . $ 5.75 #WSS1 1 oz sampler set ...... $ 32.95 * See page 35 for depth stops #WSS2 2 oz sampler set ...... $ 46.75

Teflon Applicator (tubing) - For careful application of small amounts Shelf Supports of glue. Cut a short portion of the length required, insert into spout hole of red or yellow label glues. These shelf supports are ideal for easy to adjust shelving. Just drill four holes per shelf location and insert the shelf support. #WAPP10 18” applicator tubing ...... $ .75 Pins measure 5mm diameter x 5/16” long. 12 per pack. #D3146 Clear shelf supports ...... $ 1.50

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 52

Shop Accessories Drawer Slide Brackets Euro-Style Hinges These brackets are used to mount drawer slides to Euro-Style Hinges are the the inside of metal frame computer cabinets. 2” industry standard because they width supports our three quarter and full extension provide superior cabinet door drawer slides. Sold in pairs. strength and they’re very easy to install and adjust. We offer #D3169 ...... $ 3.95 Euro-Style Hinges in a variety of overlay options including inset in both 110° and 175° openings as well as a 105° Face Frame Overlay and European Design Drawer Slides a 230° Corner Barrel Hinge. Sold in pairs.

These extremely popular, high quality drawer D3035 D3036 slides are epoxy coated for years of service and 1” 1.3125” nylon rollers provide smooth operation. Each set includes left and right hand slides. #D3018 10” Drawer slides ...... $ 1.95 #D3019 12” Drawer slides ...... $ 2.25 2.3125” #D3020 14” Drawer slides ...... $ 2.40 2.4375” #D3021 16” Drawer slides ...... $ 2.50 #D3022 18” Drawer slides ...... $ 2.65 #D3050 20” Drawer slides ...... $ 2.75 #D3095 22” Drawer slides ...... $ 3.25 110° Full Overlay 110° Half Overlay #D3035 ...... $ 1.29 #D3036 ...... $ 1.29 Ball Bearing 3/4 Extension Drawer Slides These 3/4 extension drawer slides support D3037 D3139 up to 80 pounds. Very slim profile utilizes 1.5” maximum drawer width and multiple ball bearings distribute the weight over a larger 1.125” area for smooth, effortless action. Each set includes two slides. Each slide measures 3/8” x 1-3/8”. 2.3125”

#D3023 12” Drawer slides ...... $ 6.95 1”.375 #D3024 14” Drawer slides ...... $ 7.40 #D3025 16” Drawer slides ...... $ 7.95 #D3026 18” Drawer slides ...... $ 8.40 110° Inset 105° Face Frame #D3027 20” Drawer slides ...... $ 8.95 #D3051 22” Drawer slides ...... $ 9.50 #D3037 ...... $ 1.29 #D3139 ...... $ 5.95

D3142 2” D3143 Ball Bearing Full Extension Drawer Slides 2.25” For the ultimate in drawer hardware, these full extension drawer slides support up to 100 pounds and feature multiple ball bearings for 2.375” smooth operation. Full extension drawer slides 2.375” measure 1/2” x 1-3/4” and include left and right-and slides. #D3028 12” Drawer slides ...... $ 7.95 #D3029 14” Drawer slides ...... $ 8.95 #D3030 16” Drawer slides ...... $ 9.20 175° Full Overlay 175° Half Overlay #D3031 18” Drawer slides ...... $ 9.50 #D3142 ...... $ 7.95 #D3143 ...... $ 7.95 #D3032 20” Drawer slides ...... $ 9.95 #D3067 22” Drawer slides ...... $ 10.50 #D3033 24” Drawer slides ...... D3144 2.5625” D3145 $ 10.95 1” #D3034 26” Drawer slides ...... $ 11.50

Drawer Slide Adapters 1.875” Use these drawer slide adapters to support the 2.375” back of our drawer slides for center drawer applications and face frame cabinet construction. Each set includes a left and right adapter. #D3172 Euro style drawer slide adapters ...... $ .95 175° Inset 230° Corner Barrel #D3173 3/4 Drawer slide adapters ...... $ 1.25 #D3144 ...... $ 7.95 #D3145 ...... $ 7.95 #D3174 Full extension drawer slide adapters ...... $ 1.25 * See page 34 for 35mm Hinge Boring Bit

Monday - Friday 53 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories Plastic Knobs for Making Jigs & Fixtures Wood Joiner’s Handbook Make fixtures easier, A master woodworker reveals exactly how to make perfect joints: L-shaped rabbet joints, mortises and tenons, butt joints, dadoes quicker and in some and grooves, even decorative joints, butterflies and dovetails, cases, safer to use. inlays, plus Chinese and Japanese styles. "A vast number of use- The knobs are hard, ful joints for cabinetmaking, furniture making and architectural black plastic like those woodworking."--Woodshop News. 288 pages. Softcover. on industrial machines. #6999-7 ...... $ 14.95 Ratchet levers are spring loaded to remain engaged until you lift Ingenious Jigs & Shop Accessories and disengage them. Ingenious Jigs & Shop Accessories presents the work of Ideal for work in tight America's most clever woodworkers. They've found many new spaces. ways to guide old tools, and in the process solved a wide range of common shop problems for the rest of us. You'll find almost 40 Key Part No. Description Price jigs here and endless ideas for adapting them to your own shop A #19702B T-Knob with 3/8”-16 insert $ 1.19 and projects. 192 pages. Softcover. B #19701B T-Knob with 1/4”-20 insert $ 1.09 #70434 ...... $ 17.95 C #19710B Star knob w/ 1/4”-20 stud $ 1.19 D #19712B Star knob w/ 5/16”-18 stud $ 1.29 Joinery, Shaping & Milling E #19705B Star knob w/ 1/4”-20 insert $ 1.19 Techniques and strategies for making furniture parts from Fine F #19706B Star knob w/ 3/8”-16 insert $ 1.29 Woodworking. Here you'll discover strategies and tricks for making G #19714B Star knob w/ 3/8”-16 stud $ 1.39 simple and complex shapes out of wood. Discover strategies for H #19726B Ratchet lever w/5/16”-18 stud $ 3.59 milling lumber straight, flat, and square, creating curves through I #19727B Ratchet lever w/5/16”-18 insert $ 3.59 bending, laminating and coopering, and developing techniques for routing a wide range of complex shapes and joints. 208 pages. J #19725B Post handle w/ 5/16”-18 insert $ 2.29 Softcover. #70435 ...... $ 17.95 Aluminum T-Slot Tracks & Clamps This convenient hold-down system puts clamping pressure anywhere along the flush-mounted Oversized Dust Pan and Counter Brush T-Slot track. 3/8” deep x 3/4” wide, they are Hold the dust pan flush to the floor to pick up designed to be mounted flush to the work sur- large messes in one swoop. Measures 16” face. The hold-down clamp slides in the T-Slot wide, and 10” deep. Made from aluminum to and quickly secures with the turn of the hand guard against corrosion. The counter duster knob. was specifically selected to withstand heavy shop use. Use it to clean off bench tops, #D2724 24” T-Slot track ...... $ 5.90 machinery and tools. #D2725 36” T-Slot track ...... $ 7.90 #D2726 Hold-down clamp for track ...... $ 3.70 #DP16 Dust pan ...... $ 10.99 #243727 Counter duster ...... $ 5.20 Miter Gauge Tracks • 1-5/32” wide x 1/2” high 8-Piece Screwdriver Set • Available in 32” or 48” lengths You can never have too many screwdrivers, espe- • Close tolerance fits 3/4” wide x 3/8” deep cially when the screwdrivers feature extremely miter gauge comfortable high-torque handles and magnetic • T-Track design is perfect for use with your tips for easy screw handling in tough places. If own jigs, fixtures and featherboards that's not enough, this Steelex Plus® 8-Piece set • Includes mounting hardware also features a convenient wall rack and hardened, chrome vanadium tips for years of depend- #MT0032 32” long miter gauge track ...... $ 17.95 able use. Set includes: #0 Phillips, #1 Phillips, #2 Phillips, #3 Phillips, #MT0048 48” long miter gauge track ...... $ 19.95 1/8" flat, 3/16" flat, 1/4" flat, and 5/16" flat. #D2239 ...... $ 22.95 Safety Shop Flash Perfect for workshops with loud machinery running 30-Piece Screwdriver Bit Set or when wearing hearing protection. Built-in audi- One screwdriver set that does it all! ble sound or flashing light or both will alert you The ergonomic handle produces every time the phone rings. The shop flash requires tremendous torque and features a no batteries and includes AC/DC adapter and micro- magnetic socket tip for interchanging phone with 14’ phone cord that easily attaches to hex bits and adapters. Magnetic force holds screws on the bit for thirdhand your telephone. convenience. Includes 26 bits of popular Phillips, straight, Torx, hex drive and square drive sizes, plus a 1/4" socket adapter, bit holder and case. #D2258 ...... $ 29.95 #D2032 ...... $ 12.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 54

Shop Accessories Steelex® Plus Router Bit Sets The Rebel Router Table Steelex Plus® router bit sets are made of high carbon steel bodies and are • Solid cast aluminum tipped with high-quality industrial grade tungsten carbide. Steelex Plus ® construction carbide is carefully selected and precision ground to give consistently clean • Two independently adjustable cuts while maintaining a sharp, durable cutting edge. All Steelex Plus ® 3”x12” fences router bit sets come in attractive wooden boxes for added protection. • 3” dust pickup / safety guard 6-Piece Roundover Bit Set • 1/4”Shank • Aluminum insert with pop-out rings • Miter gauge Complete Set of roundover bit sizes. All sizes have a 3/8" guide bearing. Includes: • 24” wide x 17” high x 18” deep • 1/8" r Roundover • Easy to follow instruction manual • 3/16" r Roundover • 1/4" r Roundover #W2000 $ 199.95 Optional Accessories: • 5/16" r Roundover • 3/8" r Roundover #W2001 Safety switch with 7’ cord ...... $ 12.95 • 1/2" r Roundover (2)

#D2101 ...... $ 29.95 8-Piece Straight Bit Set • 1/4”Shank Maple Router Bit Storage Tray Includes these popular bit sizes: • 1/8" Straight This thick lined storage tray with • 1/4" Straight finger jointed maple sides holds up • 13/32" Straight to 60 1/4” shank router bits and • 1/2" Straight 50 1/2” shank router bits. And • 19/32" Straight because the foam grips each router • 27/32" Straight (2) bit, there is no risk of damage. The • 15/16" Straight router bit storage box measures 11- #D2100 ...... $ 22.95 5/16” x 13-1/2”. #D2913 ...... $ 19.95 12-Piece Router Bit Set • 1/4”Shank Steelex® Router Bit Sets Convenient bit collection includes: • 1/4" Straight • 1/2" Cove Steelex® router bit sets are made of high carbon steel bodies and are • 1/2" Straight • 1/2" 90° V-Groove tipped with high-quality industrial grade tungsten carbide. Steelex® car- • 3/4" Straight • 45° Chamfer bide is carefully selected and precision ground to give consistently clean • 1/2" 8° Dovetail • 1/2" Flush Trim • 1/2" r Roundover • 11/32" Combination Panel cuts while maintaining a sharp, durable cutting edge. All Steelex® router • 1/2" Rabbeting • 1/2" Roundover bit sets come in attractive wooden boxes for added protection. #D2102 ...... $ 49.95 4-Piece Roundover Bit Set • 1/4”Shank Set includes four of the most popular sizes of roundover bits: 1/8"r Roundover, 3/8"r Roundover, 1/4"r Roundover & 1/2"r Roundover. 10-Piece Brass Guide Bushing Set These brass guide bushings with fine threads are #D1062 ...... $ 29.95 designed to follow around an template for perfectly matched multiples. the wide range of in side and outside diameters allows for full flexibility between router bit cutter size and various templates. The 5-Piece Edge Forming Bit Set • 1/4”Shank 10-pc set includes: 5/16”OD - 1/4”ID, 3/8”OD - 9/32”ID, 7/16”OD - 11/32”ID, 1/2”OD - 13/32”ID, 5/8”OD - 17/32”ID, 3/4”OD - 21/32”ID, Set includes five versatile edge-forming bits: 1/2" 51/64”OD - 5/8”ID, 1”OD - 7/8”ID and two lock nuts. Fits Porter Cable® Flush Trim, 3/8"r Roundover, 5/32"r Roman routers and other routers with template guide adapters. Neatly organized in Ogee, 3/8" Rabbet and 45° Chamfer. a convenient plastic case. #D1063 ...... $ 37.95 #D3117 ...... $ 26.95

Inlay Kit with Brass Guide 15-Piece Router Bit Set • 1/4”Shank Adapter and Solid Carbide Bit 15-Piece Router Bit Sets includes 1/2" Trim, Cut perfect inlays with this Inlay Kit and your 1/2"r Cove, 90° V-Groove, 45° Chamfer, 3/8" shop-made template. Simply slide on the Rabbet, 1/2" 7° Dovetail, 3/8" r Roundover, bushing to rout the cutout and then remove the 5/32"r Roman Ogee, 1/4" x 3/4" Straight, 1/2" x bushing to cut the perfectly matched inlay. 1" Straight, 3/4" x 3/4" Straight, 1/2" Hinge Includes a 1/8” solid carbide spiral cutter and alignment pin. Fits Porter Mortise, 1/4" Combination Panel, Solid Carbide Flush Trim and Solid Carbide Bevel Trim. Cable® routers and other routers with template guide adapters. #D1061 ...... $ 44.95 #D3118 ...... $ 22.95

Monday - Friday 55 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories

Shop Pads Rousseau Basic Router Fence These premium quality neoprene rub- • 24” long solid aluminum fence ber work pads are indispensable for • Will accommodate router bits up routing, sanding, protecting tools, lin- to 3-7/8” dia. ing drawers, dampening vibration, and • Rear hardboard cover can be cut to match more. Pads are 24” wide x 36” long x dust collection system 1/8” thick. • Includes mounting hardware and instructions #W1320 Router pad ...... $ 7.95 #W1322 Anti-Vibration pad ...... $ 9.95 #RM3301 ...... $ 74.00

Jessem Mast-R-Lift Rousseau Deluxe Router Fence • Same features as basic fence Beautifully finished with red and black anodized components, the MAST-R-LIFT • Adjustable spring-loaded rollers is the sequel to the original ROUT-R-LIFT. apply downward pressure This is the top of the line for Jessems lift • Rollers are angled 5 degrees to draw systems. Features a more streamlined the material tight to fence design and increased performance with a full 3- 3/4” of vertical travel. Designed specifically for #RM3301DL ...... $ 133.00 the Porter Cable 7518 and to fit similar cylindrical motor housings with the use of a reducer col- Raised Panel Door Templates lar. The insert plate centerhole is machined to accept up to a 3-1/2” raised panel bit and includes The twenty-piece template package a 1-1/2” insert ring. Aluminum plate measures 9-1/4” x 11-3/4” includes ten sizes for the panels and the ten corresponding templates for the #02101 ...... $ 279.00 matching arched rails. Each template is Optional Accessories: individually stamped with its size which indicates overall door width; any door size #02111 Reducer collar - 3-1/2” dia. for P/C 690 ...... $ 21.95 between 9-1/2” and 22” can be made. #02021 4-Piece insert ring set (1/4”, 1/2”, 1-3/8” & 2- All templates are made of rugged HDPE 1/2” centerholes) ...... $ 24.95 plastic for years of repeated use. #03003 Template to rout opening for Mast-R-Lift ...... $ 20.00

Jessem Rout-R-Lift Raising and lowering your router was never faster or easier. Just drop the knob in place on the top of your table and turn. One revolution of the quick speed knob equals .05 inches. The top is made of solid 3/16”, anodized aluminum plate. The carriage is also made of solid aluminum with bronze French Provincial Roman Cathedral bearings which ride on solid steel shafts. Includes one 1-1/2” insert, one #TMP-001 20 piece French Provincial Templates ...... $ 120.00 wrench for inserts, and hex key. Will not work for off-set based routers. #TMP-003 20 piece Cathedral Templates ...... $ 120.00 #02001 ...... $ 199.00 #TMP-004 20 piece Roman Templates ...... $ 120.00 Optional Accessories: #02021 4-Piece insert ring set (1/4”, 1/2”, 1-3/8” & 2- Formula 2050 Blade and Bit Cleaner 1/2” centerholes) ...... $ 24.95 Finally, a safe environment friendly cleaner that is more #02031 Template to rout opening for Rout-R-Lift ...... $ 20.00 effective than all those hazardous chemicals used to clean cutting tools. Removes pitch, resin and adhesive residue Rousseau Router Base Plate from all woodworking cutting tools. Completely non-toxic, non-flammable, certified biodegradable. Do not rinse after • 9” x 12” x 3/8” thick cleaning as formula 2050 provides protection from rust and • Fits router bits up to 3-7/8” in corrosion. Keeps your table saw top rust free too. dia. #998.001.01 18 ounce spray bottle ...... $ 10.95 • Small opening fits standard Porter-Cable template guides • Removable rings create Safety Power Switch 2-5/8” and 3-7/8” openings • Crash bar for quick and safe shut off • Includes shoulder pin for starting freehand work • 15 Amp, 120 Volt #RM3509 ...... $ 35.00 • 14 gauge power cord, 9’ long • Mounting hardware included Optional Accessory: #RM3509-T Installation template kit for above ...... $ 16.00 #RM3506 ...... $ 29.00

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 56

Shop Accessories Bessey K-Body Clamps Pony 4-Corner Framing Clamp This clamp is designed so clamping pressure is dis- Applies equal pressure to the four corners of your tributed over the entire jaw surface. Non marring picture frames, and casework to ensure that the glue resistant jaw surfaces always remain parallel. frame is square and that the miters match. Each Hardened rollers maintain sliding arm at right angle corner's pressure can be individually set. # 94240 to rail. - Adjustable from 2" x 2" to 24" x 24". # 94480 Ideal for case - Adjustable from 2" x 2" to 48" x 48". construction! #94240 Small clamp ...... $ 11.90 #94480 Large clamp ...... #K3.512 12” Capacity ...... $ 36.25 $ 15.10 #K3.524 24” Capacity ...... $ 39.95 #K3.531 31” Capacity ...... $ 43.25 #K3.540 40” Capacity ...... $ 46.50 Bessey Angle Clamps #K3.550 50” Capacity ...... $ 49.50 This heavy duty adjustable angle clamp is used for #K3.560 60” Capacity ...... $ 52.90 clamping two pieces together in either an “L” or #K3.582 82” Capacity ...... $ 63.80 “T” shape when gluing or screwing the two mem- Bessey KP Blocks bers together. Adjustable so that it will also clamp the wood pieces if they are of different thicknesses. These are the ideal companion for the K-Body Maximum opening capacity when clamping pieces of the same size is 2" framing clamps. This set of four blocks will allow for model WS3 and 4" for model WS6. you to make up a four corner clamping system #WS3 2” Capacity ...... that is perfect for clamping glued-up doors, draw- $ 24.40 #WS6 4” Capacity ...... ers, etc. $ 67.40 #KP BLOCKS ...... $ 21.80 / Set of 4 Deep Throat C-Clamp Deep Reach Pipe Clamps For those jobs where a little extra throat depth is needed, these c-clamps are great to have Cast iron, ribbed construction make these around. Maximum material thickness that can heavy-duty pipe clamps ideal for any be clamped is 2-1/2”. 4” reach. tough clamping requirement where deep #D2230 ...... $ 3.95 reach pressure is needed. 7” of reach. Uses standard pipe with NPT threads. Ideal for case construction applications. Pipe not included. Quick Release C-Clamps #D2838 ...... $ 15.95 Quick release mechanism makes adjustments fast and easy. One-way travel allows clamp to slide closed and then disengaging the the mechanism Shop Fox Pipe Clamps allows clamp to slide open. Heavy-duty Double-handle pipe cast iron construction. clamps provide plenty #D3216 3” Capacity ...... $ 6.95 of clamping torque and #D3217 4” Capacity ...... $ 7.50 convenient access for #D3218 5” Capacity ...... $ 8.95 any situation. Cam-action locking device on the fixed jaw ensures no-slip #D3219 6” Capacity ...... $ 9.95 dependability. Uses 3/4" pipe as bar. Pipe not included. #D2923 ...... $ 6.95 Wood Clamps Flex-Jaw Spring Clamps This time-tested design with independ- Made from high strength, impact-resistant plastic ent jaw control offers greater clamping with swivel jaws. Designed to apply uniform options over other types of clamps. clamping pressure. Comfort grip handles. The hardwood bodies don’t require any clamping pads and the pivoting fulcrum #FJAW-2.5 2-1/2” Capacity ...... $ 2.35 action provides a tremendous amount of clamping pressure. Miniature Clamp Set #D3007 4” Capacity ...... $ 3.50 #D3008 6” Capacity ...... $ 4.95 This 3-piece clamp set with magnetic #D3009 8” Capacity ...... $ 6.50 clamp stand is ideally suited to precision #D3010 10” Capacity ...... $ 7.95 craft and hobby work. Clamp capacities #D3011 12” Capacity ...... $ 9.50 range from 1-3/4” to 4-1/2”. Throat capacity is 7/8”. #D3198 ...... $ 2.95

Monday - Friday 57 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories

Ulmia Spring Miter Clamps Jorgensen Bench Hold-Down Open these clamps by squeezing with your fin- Excellent tool for gluing, repairing, or hold- gers, then apply to miter joint. Extremely handy down projects. This glass-filled nylon hold- and useful when clamping small moldings. down clamp is designed for workbenches and work tables. A versatile addition to any tool #560-3050 Up to 5/8” capacity ...... $ 5.15 box. Quick and easy adjustments to and from #560-3060 Up to 1” capacity ...... $ 5.45 the work using the release locking nut that slides freely on the threaded shaft. Serrated hold-down jaws prevent slipping and can adjust to work being clamped and locks into position with Ulmia Miter Clamps the locking lever. Hold-down capacity is 4-1/2” less work bench thickness, and used with 3/4” bench top holes. These miter rings have sharp tips that draw a miter joint together. Miter ring capacity is the molding size #1652 ...... $ 13.95 the ring will clamp. These are strong rings, so an application tool is necessary. Jorgensen Bench Hold-Down #560-3130 Up to 3/8" $ 1.95 #560-3140 3/8" to 3/4" $ 1.95 A versatile, easy-to-use clamp for holding work in place on #560-3150 9/16" to 1-1/8" $ 2.35 bench tops. Made of solid iron with a black baked-enam- #560-3160 1" to 1-3/4" $ 2.60 el finish; holds work securely by simply tapping into 3/4” #560-3170 1-9/16 to 2-3/4" $ 2.70 hole in bench top (requires pre-drilling). 8” length, #560-3180 2-3/8" to 3-1/2" $ 2.75 4-1/4” reach. #560-3190 Kit w/tool & 8 ea. Rings $ 129.95 #560-3100 Application Tool Only $ 54.65 #1708 ...... $ 8.50

2-1/2" 3-Way C-Clamp Shop Fox Quick Release Vises These heavy cast iron wood vises with pol- Suited for edge clamping, these 3-way ished guide rods have quick release levers clamps are fully adjustable for easy use. that disengage the screw for fast and effi- Simply secure the two opposing screws to cient operation. They also feature sliding the workpiece and then tighten the dogs for securing long workpieces to the thumbscrew to hold the edge piece. bench and disappear out of the way when not in use. Jaw width is 7" on 2-1/2” maximum reach. D2524 and 9" on D2525. #D2229 ...... $ 4.95 #D2524 8” Capacity ...... $ 55.95 #D2525 10-1/4” Capacity ...... $ 65.95 “No-Scuff”Clamps The right angle clamp (top illustration) is Flush Mount Bench Stop used to clamp assemblies perpendicular (like pulling a shelf into a dadoed cabinet This stop is easily installed into your bench top. side), and the regular profile is largely used Turn the thumb screw to raise and lower. Very stable to clamp face frames without scuffing. support. Made from a soft metal that will limit harm Lightweight, they only weigh about 1-1/2 to cutting tools if they come in contact with stop. lbs. Each. Both clamps can eliminate the #19114 ...... $ 6.95 need for long bar clamps. #D2268 Right angle clamp ...... $ 14.95 #D2269 Face frame clamp ...... $ 14.95 Jet Jointer Clamps Pinch Dogs No more fumbling around trying to hold your work together. There is nothing to tighten, Pattern and cabinet maker steel pinch dogs have turn or twist in order to hold the work piece in square corners over the legs for easy driving. Makes place. Simply push the clamps into position it a breeze to pull any two boards together. and you can glue, screw, pin or hold the work #160-3004 1” Width ...... $ 5.30 piece together. 90 degree, “T” and butt #160-3006 1-1/2” Width ...... $ 5.65 joints are aligned automatically, freeing your #160-3008 2” Width ...... $ 6.00 hands up to finish jointing the rest of the #160-3010 2-1/2” Width ...... $ 6.50 project. Accommodates up to 3/4” material thickness. 2 per set. #160-3012 3” Width ...... $ 7.30 #709055 ...... $ 19.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 58

Shop Accessories

Kreg Pro Pack Adjustable Pocket Jig • Utilizes a unique three-hole spacing • Adjustable double pocket hole guide adjusts concept from 7/8” to 3-1/4” between centers. • Ability to horizontally Features hardened steel sleeves. space holes at 9/16”, 7/8” and 1-7/16” on center #D1060 ...... $ 9.95 • Vertical settings to center holes in 1/2”, 3/4” and Step Drill Bits 1-1/2” thick material • One-piece, 3/8” diameter step bits. Available in two popular cutting • Includes K2000 jig, R2 Rocket Jig, angles; 45° for flat head screws and 90° for pan head screws. two wing supports, MKJ mini jig, Two extension blocks, FC6 6” face clamp, 3/8” #KJD Kreg 90° step drill bit ...... $ 16.99 step drill bit, depth collar, 3” and 6” driver, starter pack of 150 screws. #D1115 Economy 90° step drill bit ...... $ 8.95 #D1114 Economy 45° step drill bit ...... $ 8.95 #K2000-PP ...... $ 135.00

Face Clamps Kreg Jig • Ensure a flush joint every time. Keeps the work pieces in alignment regardless of the • The original aluminum Kreg Jig is a good screws trajectory. Clamp’s large pad also choice for the woodworker who works prima- keeps the clamp from marring the wood. rily with 3/4” thick material in a limited number of applications. #SFC Standard face clamp, 2” reach ...... $ 17.99 • Includes jig with two 3/8” diameter drill #LFC Large face clamp, 6” reach ...... $ 19.99 guides positioned 7/8” on center, 3/8” step drill bit and depth collar Kreg Right Angle Clamp #K2 ...... $ 99.00 The Right Angle Clamp helps to align workpieces in 90 degree registration. The clamp is designed with a steel dowel on one arm Kreg Rocket Jig that fits down into the pocket hole and • Dual purpose clamp to hold jig against anchors the workpiece firmly against the the workpiece as well as align the work- second workpiece to be joined. The opposite pieces arm is fitted with a 180 degree swiveling • Compact and portable, 7/8” on center pad that automatically adjusts to your material dimensions. Finish the guides joint by driving a screw into the adjacent pocket hole. • Includes Rocket jig with extension, FC6 #RAC ...... $ 24.99 face clamp, 3/8” step drill bit, collar, #2 x 6” square driver, starter pack of screws Kreg Universal Bench Clamp #R2 ...... $ 64.95 If you like the idea of using KREG Face Clamps to hold workpieces flush while driving the screws, you'll love the added assembly Kreg Mini Pocket Jig ease and flexibility of the Universal Bench Klamp. This clamping system includes a 10" x • When you need a pocket hole in a tight spot, 10" x 1/4" thick steel plate along with a modified Face Clamp that easily or require maximum portability, this jig is the slides in and out of a channel machined into the plate. Simply rout the solution. Features one 3/8” hardened steel steel plate into your workbench or a piece of plywood and you have a sleeve molded into glass reinforced nylon. 360 degree pivoting clamping station for all of your pocket hole assem- #MKJ ...... $ 12.99 bly needs. The clamp is then easily removed to leave you with a perfectly flat work surface. This clamping system also works well when helping as a hold-down for routing, sanding and finishing. 1/4”Hex Shank Power Bits - Square Drive #UBK ...... $ 39.99 Part Point Overall Price No. Size Length Each Pan Head Pocket Hole Screws #80-1R 1 1-15/16” $ .64 #80-2R 2 1-15/16” $ .64 • Provides excellent holding power in #80-3R 3 1-15/16” $ .64 soft materials and hardwoods. 1-1/4” #84-1R 13”$ 1.08 is standard length. Fine thread. #2 square head. #84-2R 23”$ 1.08 #84-3R 33”$ 1.08 #SPS-F125 #6, 1-1/4” long, 100 per box ...... $ 4.00 #88-1R 16”$ 1.98 #SPS-F125-500 #6, 1-1/4” long, 500 per box ...... $ 15.00 #88-2R 26”$ 1.98 #SPS-F150 #6, 1-1/2” long, 100 per box ...... $ 4.25 #88-3R 36”$ 1.98 #SPS-F150-500 #6, 1-1/2” long, 500 per box ...... $ 16.00

Monday - Friday 59 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Shop Accessories

Steelex® Red Polyurethane Casters Stanley Panel Carrier These casters feature a polyurethane wheel molded to a polypropylene • This Panel Carrier is high visibility yellow hub with an oil-less bearing. They are excellent for a wide variety of • 14" handle for extra reach applications where quiet operation, high wear factor and high corrosion • Better balance and control resistance are a concern. We offer them in a number of configurations • Better visibility while carrying for a variety of applications. • Angled handle keeps hands away from panel for comfort

#93-301 ...... $ 5.95

Adjustable Power Pole Extension Pole D2604 D2609 D2616 D2605 The Adjustable Power Pole can hold up to Part Price 66 pounds. They feature articulating feet, No. Size Plate Type Capacity Each rubber pads & quick-release levers and have D2604 3 ” 4”x2-5/16” Fixed 220 lbs. $ 3.90 thousands of uses, including: D2605 4 ” 4”x2-5/16” Fixed 275 lbs. $ 5.90 • Setting plaster strips to a D2607 3 ” 2-1/2”x2-5/16” Swivel 150 lbs. $ 4.50 ceiling D2609 4 ” 3”x3” Swivel 275 lbs. $ 8.50 • Installing crown molding D2608 * 3 ” 2-1/2”x2-1/2” Swivel w/Brake 150 lbs. $ 6.50 • Holding parts requiring both D2610 * 4 ” 3”x3” Swivel w/Brake 27 lbs. $ 9.90 hands D2614 * † 3 ” M12x1-3/16” Swivel w/Brake 150 lbs. $ 6.50 • Securing items to be clamped, screwed or assem- D2616 * 4 ” M12x1-3/16” Swivel w/Brake 275 lbs. $ 9.90 bled * Double locked #W78 Adjusts from 19" to 45" ...... $ 22.95 † Will fit the Performax™ Sanders #W74 Adjusts from 45" to 115" ...... $ 24.95 Steelex® Black Hard Rubber Casters These economical casters feature a The Shaper Book one-piece molded hard rubber wheel/hub with an oil-less bearing. Techniques for using this versatile and productive machine. They are quiet, offer good floor More than just a primer on shaper techniques, this book gives shop-proven examples of how the shaper can be put to use. protection, are easy rolling, resist- With an emphasis on safety, this book is a step-by-step guide ant to water, oil and most acids that will teach you all about the shaper: from basic setups to D2620 and come with a mounting plate in D2623 cutting curved molding profiles to designing shaper jigs that will either a swivel or fixed design. They are great for a large number of expand your woodworking potential. Lonnie Bird. 144 pages. Softcover. applications around the shop and home. #70251 ...... $ 19.95 Part Price No. Size Plate Type Capacity Each D2619 2 ” 1-1/4”x1-9/16” Fixed 65 lbs. $ 1.00 The Table Saw Book D2620 3 ” 2-3/4”x2-5/16” Fixed 130 lbs. $ 2.50 Selection, set-up, and maintenance of a table saw. The author D2621 4 ” 2-7/8”x2-3/8” Fixed 175 lbs. $ 4.50 covers all of the basics of the table saw plus a number of spe- D2622 2 ” 2-3/8”x2” Swivel 65 lbs. $ 1.30 cialty techniques such as cove cutting, dado work, and use of D2623 3 ” 2-3/4”x2-5/16” Swivel 130 lbs. $ 3.00 jigs and fixtures. 192 pages. Softcover. D2624 4 ” 4”x3-5/16” Swivel 175 lbs. $ 5.00 #70552 ...... $ 27.95

Steelex® Nylon Furniture Casters Table Saw Techniques Dual nylon wheels with a steel plate and stem make these furni- This book provides a complete guide to the most popular station- ture casters very strong for their ary power tools. After describing the table saw and its numerous blades and accessories, the author shows how to perform a vari- weight. Designed for appearance ety of cutting operations with the saw by itself or using shop and durability, these casters are made jigs. 352 pages. Softcover. excellent for use on medium D2631 #4268-1 ...... $ 18.95 weight furniture such as small D2634 tables, servers, TV stands, microwave carts and other similar types of furniture. The Band Saw Book Part Price No. Size Plate Type Capacity Each Professional woodworker, Lonnie Bird, gives all the information D2631 1-1/2” 1-1/2”x1-1/2” Swivel 55 lbs. $ 1.00 bandsaw owners wished came in the owner’s manual. A comprehensive, completely up-to-date guide to one of the most versa- D2633 2 ” 1-1/2”x1-1/2” Swivel 55 lbs. $ 1.10 tile tools in a woodshop. 208 pages. Softcover. D2632 1-1/2” 1-1/2”x1-1/2” Swivel w/Brake 65 lbs. $ 1.20 D2634 2 ” 1-1/2”x1-1/2” Swivel w/Brake 65 lbs. $ 1.30 #70406 ...... $ 19.95

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 60

Shop Accessories Table Saw Bench Guide Beds For any operation, special situation, or unusual problem that In Beds, you’ll find step-by-step projects for a small bed, a arises as you work, the answers are right in this guide. Find Shaker-style bed, a Craftsman-style bed, a pencil-post bed, a ply- information on all the important cuts (including cross-cutting, wood platform bed, a Windsor chair-inspired bed, a modern "city" mitering, beveling, and joinery) and facts on every dado head bed, a sleigh bed, and a bunk bed. Yo u ’ re sure to find more and what it does. Tips and shortcuts cover procedures from rip- than one project that will inspire you. 192 pages. Softcover. ping to making mortises, and there's a safety survey and professional secrets for fine-tuning your table saw. 160 pages. #70379 ...... $ 24.95 Softcover. #9135-6 ...... $ 14.95 Tables From a Shaker sewing table to a display table for art objects, Tables The Art of Making Small Boxes offers 10 excellent reasons to spend quality time in the shop. Whether you are a beginner or an experienced woodworker, the proj- Dual purposes underscore this richly illustrated handbook: to pay ects offered by Anthony Giudice in this book will provide plenty of tribute to outstanding contemporary American box makers and to challenges to increase your skills. 176 pages. Softcover. guide potential box makers to successful fruition of their desire. Handcrafted wood boxes...lovely items to treasure and, let us not #70469 ...... $ 24.95 forget, to actually use as containers...the author presents general directions, which take the reader from learning about basic tools to selecting and preparing stock, sanding, and finally, finishing. Bookcases Then come profiles of 31 outstanding box makers with directions for making specif- Bookcases are one of the most accessible and commonly built ic projects they have had special pleasure creating. 144 pages. Softcover. projects -- who doesn’t need or want open storage for their #9576-9 ...... $ 19.95 homes? The projects in this book cover a range of styles and dif- ficulty -- and they all are designed by well-known custom woodworkers from around the country. 192 pages. Softcover. The Wood Sanding Book #70431 ...... $ 24.95 If you think that all there is to sanding wood is sandpaper with a little elbow grease, guess again. In addition to the dozens of different abrasives that you can choose from, there are tools and Dining Tables techniques that can speed up this often tedious chore. If your Enjoying a meal at a handcrafted dining table can be one of a sanding equipment consists of just a sanding block, this book woodworker's great pleasures. Here, in his new book, Kim will open a vast new world. 224 pages. Softcover. Carleton Graves, one of America's top woodworkers, provides #70302 ...... $ 19.95 plans and instructions for building dining tables that would make any woodworker proud. 192 pages. Softcover. Furniture Making Techniques #70609 ...... $ 24.95 "This book aims to appeal to all levels of woodworkers....careful and practiced approach of someone who thoroughly revels in the day-to- In The Shaker Style day rituals of working with wood....author generously relates tales of Shaker furniture is beautiful, yet simple, craftmanship. In the his own mistakes and mishaps... while providing encouragement and Shaker Style, from the pages of Fine Woodworking magazine, illuminating the way for them....The entire work seems to spring from you’ll find the ideas and techniques of more than 15 contempo- his bench, and reading the articles is like standing shoulder-to-shoul- rary artisans and instructions for more than 10 projects, from der with him, catching the 'nuggets' as they spring forth."--Fine Shaker chairs to bookcases. Detailed illustrations and photo- Woodworking. 128 pages. Softcover. graphs accompany each project. In addition, you’ll see how dis- #093-X ...... $ 14.95 tinctive Shaker details can be adapted for use in today’s furniture. 160 pages. Softcover. Refacing Cabinets #70531 ...... $ 24.95 Remodeling professional Herrick Kimball shows you how to transform your outdated kitchen into your dream kitchen using Building Kitchen Cabinets wood veneer and new cabinet doors and drawer fronts. Add a new countertop and a fresh coat of paint on the walls, and you You'll learn about preparing material estimates and cutting lists, have a new look. 176 pages. Softcover. buying wood and hardware, cutting and assembling the parts of each cabinet, and finishing the final piece. Nothing is left out, #70307 ...... $ 19.95 from laying out the cabinets to installing them in your kitchen. 152 pages. Softcover. Furniture Source Book #70023 ...... $ 19.95 In this book, the author answers the questions you may have about purchasing and/or commissioning custom pieces. He tells you where to find furniture and how much you can expect to pay Building Kitchen Cabinets for it. So whether you are looking for a custom-built dining table or you want to store your linens in a truly unique armoire, this Learn how to build premium cabinetry of superior quality in your book will give you the information you need. 272 pages. own shop...from layout and design to installation and final Softcover. adjustment. Jim Tolpin simplifies the process of building cabinets by using modern hardware and joinery systems that are fast #70565 ...... $ 29.95 and foolproof to execute. He shows ho to construct easily handled cabinet modules and how to customize face frames, doors, Making Workbenches and drawers in the style you choose. 208 pages. Softcover. "Explore the common materials used to make workbenches, basic #70196 ...... $ 19.95 construction methods, and traditional bench designs, including a joiner's bench and a classic Scandinavian-style cabinetmaker's bench.... instructions and plans for bench accessories such as drawers and storage bases"--Woodshop News. 160 pages. Paperback. #0535-2 ...... $ 14.95

Monday - Friday 61 Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time

Mail orders to: Shipping and Handling: The Belsaw Company ORDER FORM Actual shipping charges apply to all 90 Karina Court orders. Call our customer service If you need more room, please department if you are not sure what to San Jose, CA 95131 use a separate piece of paper add for shipping to a mail-in order.

Sold To: (Please include the number above your name on the mailing label) Ship To: Please check here if your address has changed Motor Freight Policy: Items weighing over 70 Customer # Name lbs. are required to ship via motor freight. Name Address Freight charges will be calculated at the time the order is placed.

Address City State Shop Fox® machinery will be shipped from warehouses located in San Jose, City State Zip Zip CA; Bellingham, WA; Springfield, MO or Williamsport, PA. Telephone Telephone * Before signing the freight bill of lad- ing, inspect the shipment for damages Order Number Qty Product Description Price Each Total Price or shortages immediately upon delivery. It is the responsibility of the signee to off load all merchandise from trucks. Lift gate service is available on most truck shipments for an additional charge. Ask a salesperson for details. If there is a problem, contact our customer service at 1-800-468-4449 before signing the freight bill.

Sales Tax: We are required by law to collect sales taxes. Please include the appropriate state sales tax along with any county and city taxes with your order for the states listed below. Failure to do so may delay your order.

California • Idaho Nevada • Washington

Freight is a taxable item in the states of Nevada & Washington. If you live in Payment Information Subtotal these states, please figure your sales tax carefully. Check/Money Order (Enclosed) American Express Sales Tax (CA, ID, NV, WA) Returns: Master Card Visa Discover Shipping (Call) We want you to be thoroughly happy with the products you purchase from us. Credit will be issued for any item C.O.D. (Please add an additional $7.50 to your order) Grand Total returned UNUSED in the same manner you purchased (credit card, check). If Check by Phone or Fax (Call salesman for details) you need to return an item, please con- Thank you tact our customer service department for Card # Exp Date: a return authorization and other instruc- for your order! tions. Signature Customer Service: If you have questions about your order or products you received, please ask for Abrasives ...... 27-30 Miter gauges ...... 15,16 our customer service department and we Air Cleaner ...... 40 Mobile bases ...... 18 will try to answer any questions you Band Saws ...... 21 Mortising Machine ...... 37 might have. Belsaw molding knives ...... 3-13 Planer/Molders ...... 2,13 Open Accounts: Books ...... 38,40,43,44,54,60,61 Planers ...... 23-24 Available only to government agencies, Brushes ...... 51,54 Plug cutters ...... 35 institutions, public and private schools. Cabinet scrapers ...... 41 Pneumatic accessories ...... 46 Orders must be written on purchase Carving accessories ...... 50 Pocket jigs & accessories ...... 59 orders with complete billing address noted. Request a credit application Casters ...... 60 Roller stands ...... 23,24 from our credit department. Chisels ...... 41 Rosette Cutters ...... 33 Clamps ...... 57-58 Router accessories ...... 55-56 Duplicate Catalogs: Dado blades ...... 17 Router bits ...... 55 We make every effort to eliminate dupli- Doweling jigs ...... 32 Safety accessories ...... 49 cated mailing labels. If you receive more than one catalog, please notify us. Drawer slides ...... 53 Sanders Drill bit sharpeners ...... 36 Belt/Disc Sanders ...... 29 Pricing: Drill Presses ...... 31-32 Disc Sander ...... 28 Prices and specifications in this catalog Drilling accessories ...... 31-37 Drum Sanders ...... 27 are effective at the time of printing. Though we strive to keep our prices as Dust Collectors ...... 38 Edge Sanders ...... 28,29 low as possible, unexpected price Dust collection accessories ...... 39-40 Oscillating Spindle Sander ...... 28 increases from manufacturers may Dust pan ...... 54 Wide Belt Sanders ...... 27 occur. There are also occasions where Feather boards ...... 15,25 Saw blades ...... 17 special manufacturers discounts will Files ...... 42 Saws (Hand) ...... 45 result in prices lower than what is pub- lished. We will try to offer the manufac- Glue ...... 51-52 Scissors ...... 44 turers discount to our customers when- Grinder ...... 26 Scroll Saws ...... 22 ever possible. Typographical errors and Hinges ...... 53 Shapers ...... 22 prices are subject to change without Jig & Fixture accessories ...... 54 Sharpening accessories ...... 26,50 notice. Jointers ...... 25 Table Saws ...... 15-17 Laminate accessories ...... 43 Tap & Die sets ...... 36 Lathes ...... 26 Tool bags ...... 46 Levels ...... 49 Tweezers ...... 44 Measuring & Layout ...... 47-49 Vises ...... 31,58

Monday - Friday Order Toll Free! 1-800-468-4449 7:00am to 3:00pm Pacific Time 62

PRSRT STD U.S. Postage Paid Sacramento, CA Permit #2214

THE BELSAW COMPANY 90 Karina Court San Jose, CA 95131

Visit us on the Web at: www.belsaw.com

Order Toll Free! 1-800-468-4449 Monday - Friday 7:00am to 3:00pm Pacific Time

150-Piece Mega Brush Set TopSaver Rust Removal and Top Protectant Kit This Mega Brush Set includes Finally, a rust removal kit that Really Works! It is a 50 foam brushes with wooden Rust Remover/Lubricant/Surface Sealant/ handles, 50 bristle brushes Conditioner for metal surfaces. It completely with wooden handles and 50 removes rust and corrosion from the pores of the glue brushes in assorted sizes. metal surface. It reduces sliding friction, eliminates Ideal for quick painting, stain- binding and surface hang-ups on tabletops, repels ing and finishing jobs, as well moisture and seals the surface pores against as spreading glue, flux and rust and corrosion. Includes 8 ounce pipe dope, the convenience bottle of TopSaver, gloves, abrasive factor alone makes this set one of the best deals around. pads and wiping cloths. #D3105 ...... $ 29.95 #TOPSAVER KIT ...... $ 19.99 6-Piece Scraper Set Fractional Dial Caliper This stainless steel fractional dial caliper combines the same precision Remove tool marks and that metalworkers are accustomed to with prepare wood surfaces for a fractional scale for woodworkers. Perfect finishing better than for measuring board thickness, depth and sandpaper with this 6- inside measurements. Dial reads 64ths piece scraper set. Includes fine, medium and heavy cutting rectangular and .01”. Six inch capacity. scrapers, concave/convex scraper, gooseneck scraper and beveled edge scraper. To renew cutting edges, simply joint the edge flat with a file and #D3208 ...... $ 39.95 burnish to form a slight hook angle. Two of the scrapers have rounded edges to prevent accidental “digging” in your work. Smith & Wesson® Tool Chest II Multi Tool #D3294 ...... $ 10.95 This 24-function Multi Tool features so 22-Piece Tapered Drill Set many tools, it's just like having a tool chest on your belt. Includes 11 screwdriv- This set contains tapered drills sized for er bits and Cordura nylon sheath. Includes: #5, #6, #7, #8, #9, #10, #12 screws, Needlenose pliers with wire cutter, 3/16" plus the stop collars and countersinks & Straight screwdriver/bottle opener, Scissors, File, counterbores to match them. Includes Dual scale ruler, Can opener/awl, Phillips screwdriv- allen wrench. #D1041 ...... $ 16.95 er, Drop point blade, Hex bit holder/1/4" socket. #SW1057 ...... $ 24.95 Shop Fox Pipe Clamps Miniature Clamp Set Double-handle pipe clamps provide plenty Index This 3-piece clamp set with mag- of clamping torque and netic clamp stand is ideally suited convenient access for any situation. Cam-action locking device on page to precision craft and hobby work. on the fixed jaw ensures no-slip dependability. Uses 3/4" pipe Clamp capacities range from 1-3/4” as bar. Pipe not included. 62 to 4-1/2”. Throat capacity is 7/8”. #D2923 ...... $ 6.95 #D3198 ...... $ 2.95