Equipment Directory Index

Pag e Datapoint 2200/Version I 2 Version II ...... 2 Communications Ad aptors 4 Asynchronous ...... 4 Serial RS232 B data 300 Baud Modem 1200 Baud Modem High Level Keyer Synchronous ...... 4 Parallel Data Interface ...... 5 Multiple Port Communications Adaptor ...... 6 2200 Servo . 7 Ca rd Reader ...... 10 Selectric Typewriter Interface ...... 11 Datapoint 2200/ Shelf Attachment .. 12 Datapoint 2200/ Paper Ho lder ... . 12

Datapoint 3300/ lnteractive Terminal ...... 13 Tape Unit ...... 14 Acoustic Coupler .. 14 Th ermal Printer . 15

Datapoint 3000/ lnteractive Terminal ...... 16

Datapoint 3360/ Display Unit ...... 17

- Datashare Video Terminal .. 18

Datapoint Training. Documentation, and Supplies. . ... 19 ® Datapoint 2200 GENERAL SPECIFICATIONS The Datapoint 2200 has the fo ll owing general the bus iness mini-computer c haracteristi cs: a. 11 5 v.a.c., 60 cycle, 180 watts, power input (5 0 Version s I and II cycle optional): The Dal apo in t 2200. Ve rsion I is an integrated data b. 47 pounds weight: system which offers alphanumeri c keyboard for data c. 9 5 8" high, 18' 2 " wide, by 19 5 8 " deep outside entry. a cathode ray sc reen for data display and two d imensions: digital cassette recorders for bulk data storage Th e d. 0 to 50 C (32 to 122 F ), 10 to 90 percent relative system also integrates a general purpose d ig ital humidity operation e nvironment. computer for both system control and data processing tasks along with th e capabi lity for extensive CRT DISPLAY Th e Datapoint 2200 CRT Disp lay provides th e fo ll owin g comm unicat ions inte i"f ac ing and fo r interfacing With extemal devices or periphel"als Ve l-s ion I of the Datapol nt features· 2200 contains a max imum of 8. 196 words of recil"cu lat ing a. 7" x 3' 2 " viewi ng area: MOS memory Th is in tegrated system computer b. 960 chal"acters: memory. and peripherals. has gained wide acceptance in c. 80 character by 12 li ne format: a variety of data processing and communication d 4 /32" x 3/ 32" character size: applications. e. Entire 94 character ASCII set: 60 frames per second refresh rate (50 fram es per Versi on II of th e Datapoi nt 2200 mai ntai ns the orig i nal f. concept but incorporates numerous improvements and second when using 50 cycle power): g 5 x 7 matrix character generation: additions to augme nt its processing power It appears - h. 5 x 7 solid, blinking cursor, altemates with charac­ physically identical to Vel"sion I and retains all the advalltages of the earli er Datapoint In fact. in keeping ter. nondestructive: with the concept of upward compatibility programs P31 green phosphor Sillgle control li ne erasure, fr ame erasure, and page genel"ated fOI" the Version I Datapoint Will run substan­ roll-Up: and tially fastel" on Version II Datapoint Memory size of k. Direct control of al l CR T functions by the 2200 Versi o n II is a maximum of 16.384 words of 8 bit memmy providing tab, editing, form control, etc. Version II provides the programmer the added advantage of interrupt capability This hardware KEYBOARD interrupt feature enables the programme r to service The integral keyboard provides a basic 4 1 key peripherals requiring attention without the necessity of alphanumeric key group, an 11 key numeric group and periodic addressing and status checking in his main five system control keys Th e keyboard provides a program . Othel" improvements include. an add itional set unique mu lti-key (n-key) rol l-over characteristic of 7 registers and 4 control flip-fl ops (alpha and beta providing maximum ease of typing Transfer of modes). program access to the stack through the new characters from the keyboard is under control of the Pu sh and Pop instructions. These c hanges have all been 2200 processor. An audible cli ck providing an acousti cal incorpmated into the 2200 Vers ion II without the need feedback to the typist is ava il ab le under processor to modify or convert user so ftware written for the control. A programmable aud io beep is also provided Vel"sion I 2200. except for delay loops when it is desired to gain a typi sts attention. Th e avai labil ity of two termina ls allows the user to match the power of the internal processm and memory PROCESSOR to the application Tasks requiring substantial logical Th e integral processor provides all control functions operations and computing wil l lend themselves to a and inc lu des Versi o ll II machine whi le operations involvin g lig ht a. 50 different in structi o n types; computing duty 0 1" non-critical speed requ irements will b. 14 addressable reg isters: fin d the Version I provides a powerful , yet econom ical c. 16 deep pu shd own stac k: alternative. d 8 bit memory word length ; Both versions are physically identical in appearance e. Up to 16,384 word memory: and the operator need not bo re-trained for operation on f. Complete paralle l I/ O system, both types. g Automatic power-up restart. Version I machines may be convert ed to Version II if the need arises. DECKS Two read-write tape decks are provided for program and data storage Th e deck accepts Norelco (Phi lli ps )­ type cassettes and provides a. 47 characters per in ch density; ,I

PUSHDOWN STACK b. Forward-reverse o peration, A uni q ue feature of the Datapoint 2200 is th e c. Processor controll ed data transfer. d irection incorpo ration into th e processor's stru cture of a contro l. and hi gh-speed rewind . pu shdown stac k.' This is usefu l for subro utine calling, MEMORY as it saves the last used add ress whi le doing a memory The basic Versi on II Datapo int 2200 is supplied with re ference to a different add ress, calc ul ating an ad d ress 4 096 eight-bit words of memory Additional mod ules of and the n jumping to it without having to overstore a 4.096words each may be incorporated with the max imum JUM P instruction. mak ing an abortive exit fro m a memory capacity of the processor being 16.384 words. subro utine (returning contro l to a location other than the Th e Datapo int 2200 Versi on II memory is a random one after the CALL in struction ), and sav ing the state of access MOS memory with an access time of 3.2 the mac hine if there is at least one free stack locati o n. mi croseconds. Each memo ry cycle takes 1.6 microseconds and each instruction takes 2. 3 or 4 cycl es INTERRUPTS Included in the Datapo int 2200 processor is a hard­ to complete Due to the random access nature of the memory . the time requi red to read or write to th e ware interrupt feature. Th e inte rrupt signal occurs at a me mo ry is the same regard less of the add ress. one mill isecond rate. Th is o ne millisecond rate is The Vers ion I me mory also has 8-bit words (byte ) but is accurate to within :::1..: 005% somewhat slower than the Version II. Instructi on execution tim es ru n from 8 to 16 microseconds. Sequential memory accesses take only 8 microseconds. Versio n I also uses MOS-type memory although the techn ique is di ffe re nt. The use of this serial/ parallel memory allows some savings to th e user in cost.

3 Datapoint 2200/Communications digitally synthesized modems are located in the sa me box with the adaptor and all ow the use r to dial and Adaptors answer on the stand ard telephone network without a hand set present. All th ese operate under prog ram ASYN CH RON OUS control providing complete un attend ed calling and answerin g operati ons. Multidrop and polling operati ons Internal data transfers in the Datapoint 2200 are in can also be configured using this stand ard hard ware. parall el form. Com mu nicati ons and many peripheral If your system in volves teleg raph-line operati ons, a devices used in today's data processin g operati ons model is avail abl e to handle neutral or polar hi gh-l evel requ ire a serial start-stop data stru ctu re. Th e telegraph keying. Asynchronous Communicati ons adaptor provides thi s asynchronous se ri al data format and opens the Datapoint to many versatil e appli cations SYNCHRONOUS Th e adaptors conn ect directly to th e Datapoin t 2200 and are completely under program control. No man ual A Synchronous communicati ons form at provides th e ad justments are present. Both data rate and character Datapoint 2200 user w ith a hi ghl y effi cient means of length can be program specified. Start and stop pul ses information transmi ss ion. are automatica ll y added and subtracted from the Start or stop bits are not used in synchro nous transmitted or rece ived data. transm iss ion, therefore creating a hi gher data through­ With the 2200-400 un it (no intern al modem install ed ), put than the asynchro nous format. In effect, all of th e a Be ll Dataphone can be connected through a standard 9ata transmitted is useful inform ati on except for the EI A cable which is suppli ed Th e adaptors ca n also be control characters, whi ch serve to direct the data fl ow connected to a wide variety of other devices whi ch between devices. operate on asynchronous, sta rt-stop data such as The synchronous adaptor connects directl y to the teleprin ters, modems, and serial in put printers Datapoint 2200 with no other hardware requ ired Th e For complete telephone communi cations capability, output attaches throug h a suppli ed cable to a Be l1 20 1 two other versions are ava il ab le with Datapoint manufac­ Dataphone or other modem capable of handli ng tured, Bell -compatible, 103 and 202 type modems. Th ese synch ronous data.

General Specifications MODEL CODE 2200-400 MODEL CODE 2200- 402 ASYNCHRONOUS ADAPTORS Serial Data Adaptor 1200 Baud Modem

Signal Signal Data Rate Equivalent to Bell 202 Dataphone® 37.5 to 9600 baud. programmable RS232C level signal, full or half d uplex

Data Lengt h Rate Rate 7-11 bit code, including start and stop 37.5 to 9600 baud, programmable 1200 Baud (1800 Baud max.), hal f programmable pulses duplex (ful l duplex using reverse Connection channel for data) Telepri nters. Bell Dataphone®, other Interfac e Connects directly to Datapoint 2200 serial devices Operations 1/0 bus Auto-d ial , auto answer, connect MODEL CODE 2200-401 Connection Codes 300 Baud Modem Anyasynchronous Bell 1001 B Direct Access Arrangement or private w ire Signal Data Format Equ iva lent to Bell 103 Datap hone® Serial asynchronous, start-stop MODEL CODE 2200-403 Rate High Level Keyer 300 Baud (450-Baud max), fu ll duplex Physical Specifications Signal (all communications adaptors) Operations Neut ral o r polar, hig h level keyer Auto-dial. autoanswer. d irect Power connection Operation The Datapoint 2200 will supply power for Telegraph cu rrent loop keying up to two adaptors. More require Connection auxi liary power supply. Bell 1001 B Direct Access Arrangement Connection or private wire Direct to te legraph line Mo unting Wall. co nso le. or stand-alone.

Dimensions 10.5 W x 15.5 H x 2.7 D (inches)

4 The adaptor contains powerful hardware error­ checking capabi lities Several formats are used with the ASC II and EBCDIC codes and the adaptor handles these withi n its own hardware. Polynomial, vertical redundancy (V RC ), and longitudin al redundancy checki ng (LRCC) can all be accompli shed by hardware. For users with I BM Binary-synchronous hard ware, the adaptor will also hand le thi s disc ipline

PARALLEL INTERFACE

Many useful data commun ication devices and assoc iated peripheral equipment maintain communi ­ cation li nkage through para ll el data transmission. Parallel transmission techniques enable these devices to transmit one word (byte) of informati on at a time as opposed to serial transmission techniques In parallel communication, transm itted information is presented on a group of parall el communi cati on wires, each wire correspondin g to a sin gle bit of the transmitted word. Th e Datapoi nt 2200/ Parall el I nterface is designed to provide the most efficient and flexible parallel communication capability to the Datapoint 2200. Users with appli cations in volvin g interface to various types of peripheral equipment or electron ic in strumentation will find the Parall el Interface useful for this purpose.

MODEL CODE 2200-404 MODEL CODE nOO- 420 Physical Description Synchronous Data Adaptor Parallel Interface The 2200-420 consists of one printed­ Data Fo rmat Data Input circu it card mounted in the standard Synchronous 8-wire Parallel Data communications adaptor housing. The 8-wire Parall el Status 2200-420 circu itry consists mainly of Data Rate TTL MSllogic. Rate determined by modem used. Data Output 8-wire Parallel Data The three connectors on the housing Codes 8-wire Parallel Command Word have the following fun ctions: ASC II or EBCDIC (must be specifi ed) J1 Datapoint 2200 I/O BUS interface, System Reset Strobe contai ning paral lel inputs and Status In put Strobe Interface outputs, command strobes and Data Input Strobe Connects d irectly to Datapoint 2200 power to the 2200-420 (male External Command Strobe 1 via I/O BUS con nector). External Command Strobe 2 J2 A dupl icate of J1 (female connector). External Command Strobe 3 Connection J3 Parallel interface containing all External Command Strobe 4 Bell 201 se ri es Dataphone@or other signal lines for operatio n w ith Device Addressed Level modem. external devices. Operations Data Output Levels A Datapoint 2200 will provide power for Polynomial error check, VRC, LR CC All data levels can be either 0 and + 5 volts up to two 2200-420 parallel interfaces. If or 0 and + 12 volts by internal jumper. additional interfaces are requ ired, auxili ary power must be supplied. Special Features Status input c ircu itry can be altered to Mounting perm it latching of individual status bits. Wall, console, or stand-alone Pulse status conditions can be easil y detected in this mode. The latch in g status mode is enabled by inserting a jumper on the pa rallel interface circu it card for each desired latching bit. When the latch ing mode is used, the execution of INPUT, following the execution of EX STATU S, wi ll c lear the status latches if the interface is addressed . 5 Datapoint 2200/Muitipie Port Communications Adaptor

Mi1llY digitill diltil commlinicCl li ons systems ilnd data processin g devices uti lize a stm t-s top 8synchl'O nous mode o f commulliC8t ion. The Multiple Port Communic8- tions Ad8ptor (2200-460) C

Specifications Codes Dimensions 10 .5W x 18.0H x 2.7 0 (inches) Data Rate Any asynchronous Standard baud rates are 110,300 and Data Format Power 1200 baud, selected by wi re j umpers on Serial asynchronous, start stop The 2200 -460 derives its power from the printed ci rcuit card s. 2200 I/ O Bus. A total of two 2200-460's Output Signal ca n be powered from the I/ O Bus with Data Length RS -232-C compatible, full or half duplex additional Multiple Port Adaptors requir­ 7 - 11 bit code, inc ludi ng start and stop ing auxiliary power supp li es. programmable pulses Connection Serial async hronous devi ces such as Bell Interface Datap hone, Teletype , Printer, Terminal. Co nnects directly to Datapoint 2200 I/ O etc . Bus Mounting Wal l. console, or stand-alo ne

6 Datapoint 2200/Servo Printer

The Servo Printer contain s a variety of highly desirable data processing fea tures not usually foun d in one printer Th e heart of the printer is a servo-dri ven, rosette shaped, type wheel made of fl exible plastic Thi s type w heel is positioned according to th e character desired and stru ck by a small e lectric hammer against a c loth or carbon ribbon. Thi s straightfo rward constructi o n results in a heavy­ d uty printer that run s mu ch qui eter than a standard offi ce typewriter and has few moving parts Print quali ty equals or surpasses most standard typewriters and the type wheels ca n be easily changed to accommodate a variety of upper and lower case fonts. Print speed is 30 c haracte rs/second altho ugh the printe rs prod uction rate can be much hi g her than conve ntional 30 cps printers due to an ability to shuttle or slew ' across blank areas. The 30 cps rate appli es to soli d text as the print mechan ism can move at 30 inches per second over blank areas. Using thi s print and slew requi rin g a dot-plotting graphi c functio n w ill fin d this technique. th e Servo Printer can match conventi onal feature usefu l. printers with hi gher print speed ratings Either fri ction Whi le the rugged, simple construction of th e Servo or sprocket feed can be used. Prin ter all ows constant use in standard data processin g Most data processing printers can onl y move o ne work, the exceptional print quality w ill permit the user to c haracter space to the right or left. Th e Servo Printer can apply this device to tasks usuall y requiring a typewriter space as li ttle as 1/ 60 in ch per space givin g th e user an style printer such as text-processing and let ter-typing abi li ty to justify text by inserting fractions of character Th e Servo Printe r plugs directly into the Datapoint spaces at appropriate intervals. Th e prin ter may also be 2200 w ith no add itio nal equipment req uired. Multiple instructed to feed paper forward or reverse. Users printers may be used.

Functional Characteristics Forms Power Requirements Printing Speed Capable of handling tractor 110 v.a.c. , 60 Cycle, 150 watts 30 CPS (asynchronous) feed forms (max 14.875") or 220 v.a.c , 50 Cycle, 150 watts ordinary typewriter paper. Carriage Slew Rate Model Codes 30 inches per second I ntercon nection 2200-250 Printer/ Desk Console Direct connection to Datapoint 2200-25 1 Pri nter/ Free-standi ng Console Paper Skipping Rate 2200 I/ O bus 2200-203230 v.a.c., 50 hz option (facto ry 24 LPS installed only) Operator Controls 2200-803 Shelf attachment Print Positions Per Line Line Fe ed Key 2200-260 Cloth Ribbon 132 (when using 10 characters per inch) Form Feed Key 2200-26 1 Carbon Ribbon Platen Knob for forms ad justment 2200-270 Courier 72 Printwheel Printable Characters 96 Forms Thi ckness ad justment 2200-271 Pi ca Printwhee l Three printwheels 2200-272 Elite Printwhee l availab le: Courier 72 Physical Characteristics Pi ca Dimensions Elite 2200-250 2200-251 Width : 53 inches 36 inches Horizontal Increment Height: 37 inches 35 inches 60 per inch Depth' 37 in ches 37 inches Weight: 2151bs. 195 1b s. Vertical Increment 48 per in ch

Printing Method Impact, Rotating Printwheel

7 Datapoint 2200/Tape Drives 7- and 9-Channel

Th e Datapoint 2200 tape systems offer the 2200 user a complete line to suit his tape storage requirements. Two models are avai lable-9 channel, 800 bpi , and 7 channel, 800 or 556 bpi. Either of these fully industry­ compatible tapes can be console mounted with the 2200 or free-standing in a separate cabin et. I n either case, the units connect directly to the Datapoint 2200 with no interfaci ng or other adaptors required. Th e tape control unit is included in the cabi net and automaticall y generates vertical parity (VP), a cyclic redu nd ancy check ch'aracter (C RCC), and a longitudinal redundancy check character (LRCC ). Upon reading the tape, the VP, CRCC, and LRCC are automaticall y regenerated and checked. A 1,057 byte buffer provides interm ed iate storage of characters, permitting asynchronous data transfer to and from the deck. Records can be written up to a length of 1,057 words.

Functional Characteristics Interconnection Power Requirements Direct connecti on to Datapoint 2200 11 5 v.a. c. , 60 Hz , 275 watts I/ O bus Recording Format (Industry-Compatible) (not including 2200) 2200-300, -301 2200-302, -303 9-track, NRZI 7-track, NRZI Physical Characteristics Model Codes 800 BPI 556/800 BPI 2200-300 9-track, Desk Console 2200-30 1 9- track, Free-standing Console Tape Speed Dimensions 2200-302 7-track, Desk Console 2200-300, -302 2200-301, -303 12.5 inches per second 2200-303 7-track, Free-standing Console Width : 52 .5 lnches 29.4 In ches 2200-304 Tape clea ning kit Height: 36.5 In ches 36.5 In ches Reel Capacity 2200-305220 v.a .c., 50 Hz Depth : 22.7 lnches 22.7 In ches 8-1/2, 7 inch or mini ree ls of (factory in stall ed o nl y) 1/2 inch tape Weig ht: 290 Ibs. 2801bs.

Maximum Record Length 1057 bytes

Error Control Industry compatible Fully automatic VP, LR CC , CRCC Read-alter-write

8 Datapoint 2200/Disk System

A Datapoint 2200/Disk provides the user with a random-access, non-volatil e, mass memory system Th e disk is a removable cartridge-type with each cartridge containing over 2.4 mi llion bytes (8 bits) of data. Th e disk cartridges are full y enclosed and easily inserted and removed from the dri ve. By use of the replaceable disk, an almost unlimited number of programs and data fil es may be kept on hand and ready for immediate use. Th e operator need onl y to press the load button and the disk is automaticall y brought on-line. Th e Datapoint 2200-350 Di sk System can be expanded Up to three 2200-354 disk drive extension units can be added mak in g a total of four disks. Th e 2200-354 extend er disks are id enti cal in appearance to the 2200-350 controll er and disk. System programmers will find the disk control ler offers many powerful features. Th e controll er contain s 1,024 character memory whi ch is divided into fou r 256 character areas. Thi s buffer or memory can be addressed random ly by the 2200 fac ilitating the updating or sortin g of data within a sector. All error detection and appropriate control characters are done automaticall y by the contro ll er. Th e 2200/Disk conn ects directly to the Datapoint 2200 via a standard I/ O cabl e. No other interface is required

Functional Characteristics Di sk Timing Power Requirements Rotation Speed 1500 rpm 11 5 v.ac ., 60 Hz, 1050 watts, (220 v.a.c, Av erage Latency 70 MS 50 Hz opti onal) Capacity Track-to-Track 15 MS Max . Surfaces 2 Tracks/Su rface 203 Operator Controls Model Codes Sectors/Track 24 LoadlRun 2200-350 Console mounted contro ll er Bytes/Sector 256 Protect willl one drive unit Bytes/ Di sk (8 bits) 2.494.464 2200-35 1 Freestanding con troll er with Indicator Lamps one drive unit Bit Density Load 2200-352 Console controller wi th two 2200 BP I Ready driv units (o ne console Protect mounted and o ne free-standing ) Track Density Check 2200-353 Contro ll er with two d isk drive 100 TP I units (both disks in free­ slandi ng cabinets) Bit Transfer Rate Physical Characteristics 2200-354 Single d isk drive extension unit. 1562 KHz (free-slanding)

Dimensions 2200-350 2200-351 Width 53.0 inches 36.0 inches Heig ht: 28.0 inches 28.0 inches Depth : 24.0 inches 24 .0 inches Weight : 2001bs. 175 1bs.

9 Datapoint 2200/Card Reader

A med iu m speed opti ca l ca l-d reade l-. the Datapolnt 2200-500 is designed fo r continuous duty In a wide vari ety of appl ications. Standard SO -colu mn cards may be I cad at demalKI ratC's of up to a nominal 400 01- 600 cards PCI' mi nute. Tile 2200 Card Reader att ac hes directl y to the I 0 Bus of tile Datapoint 2200 tll ro ugh a bu ffered interf ace . Data is transmitt ed in two S-bi t bytes along with stat us in form atio n. The Card Reader ca n only be used wit h a Versio n II Datapoint 22 00 because of th e high chal-acte r tl'a nsfer rate. The Cal-d Readel- is easil y ope l-ated by in experi enced pel-sonnel and ca rds may be loaded and unloaded w hil e tile readel- is o perating. The o ptical reading mechanism is se lf-cleaning thus keeping main tenance to a min im um. Operator contl-o ls along w it h status indicators are readi ly accessible from the fro nt pane l The const ruction of th e Card Reader not o nly offers a si mplicity of opera­ ti on bu t an un usual hig h tolerance of bent or damaged ca l-cis that wo uld ordinarily jam oth e r types of readers.

Specifications Program Commands Physical Characteristics Motor all Motor o ff Card Rate Card M oti on Dimensions Up to 400 or 600 cards per minute, nominal 2200-500 Card Reader Card Type Device Status Wid th 14.25 Inches 80 colu m n cards con forming to ASA Hopper Empty Heig ht. 19.0 inches X3 11- 1966. USAS X3.21- 167 and EIA Devi ce Ready Dep th . 18.0 Inc hes Standard 292. Bl ack. blu e and bl'O wn Read Ready Weig ht 52 1bs. ca rds are exclu ded . Ca l'd Mo ti on

Cap acity Power Requirements Inpu t Ilopper 600 ca rds. ou tpu t stackel' Operator Controls 11 5 v.a.c .. 60 Hz. 30 0VA 1000 . Cilrds may be ildded 0 1 removed Power SWlt c ll dU l ll1Y OfJe l atloll Stilrt/ Stop Model Codes Reading M echanism Indicator Lamps 2200-500 Ca rd Reader Flbel Opti CS Wi th sol lei state se nsor Hopper empty (or Ferd Failure) 2200-502 220V, 50 Hz modet Stac ker Full Da ta error

Interconn ecti on Direc t con nec ll on to 2200 1/ 0 Bu s All necessary cables In cluded .

' 11 Datapoint 2200/Selectric Interface rated speed of 14.8 characters. Th e interf ace does not all ow th e Selectric to be used as a keyboard data entry device . However. th e Selectri c may be used as a stan­ For applicati ons req uiring a low-speed. typewrite r dard offi ce typewriter when not under control of th e quality printer. the Datapo int 2200-240 Selectric Datapoint 2200. In terface provides a means to connect a Model 735 IBM No extra power supplies are required The 2200-240 Selectric typewri ter to the Datapoint 22 00. The type­ interface plugs directly into the I/ O connector of the writer is avai lable from IBM Corporat ion. Datapo int 2200 and the Selectri c connects to the Th is in terface allows the printer to operate at its ful l interface via a furnished cable.

Functional Characteristics Physical Characteristics Power Required Power supplied by Datapoint 2200 Code Dimensions Correspondence Code Height 15.5 lnches Model Codes Width . 10.5 inc hes 2200-240 Selectric Interface Adaptor Connection Depth 2.7 inc hes Th ro ugh Interface Ad aptor via supplied cabl es . Mounting Wall . Console, or Free-Standing of Selectric Typewriter Specifications Interface Adapto r IBM Model 735 (130 c har. I in e) o r 73 1 (BO'char line) Co rres pondence cod e wired 24 VD C co il s Reversed diode polarity Courier type styl e (suggested) f Sandstone beige color (suggested) J 11 5 v.a.c .. 60 Hz motor (or as reqU ired)

11 G

Datapoint 2200/Shelf Attachment

The she lf attac hment inc reases th e tabl e width of a Datapo int conso le by te n in ches. Th e she lf is th e sa me de pth as th e tabl e (22-11 / 16") This additional work space may be attac hed with the provided screws to either e nd of any Datapo int conso le or stand-alone.

Technical Description

Dimensions Width . 10 inches Depth : 22-11 / 16 inches Material: Plywood and Steel Color: 2200 Brown

Datapoint 2200/Paper Holder

Th e 2200-165 Paper Holder is designed to fasten to the fro nt of the 22 00 above the screen. It is useful fo r system operato rs who are eithe r keying in or verifying data from so urce materi als. Easy to attac h or re move, the Paper Hold er adds a highly desirabl e conveni ence to system o perati on.

12 Datapoint 3300'lnteractive Terminal

Th e Datapoint 3300 is an interactive data terminal designed primaril y for the computer time sharing user. Standard features of th e 3300 include complete in ter­ changeability with standard te letypewrite r equipment, hi gh-speed data tran sm iss ion capabilities, a high capacity and fl exibl e CRT d isp lay, easy to read characters, solid state constru cti on throughout, modern styling, totall y se lf contained and a 64-character set keyboard. Optional features include magnetic tape memory, hard copy printe r and a ten-key numerical keyboard. Th e 3300 is intended primari ly for use by the remote computer use r who utilizes "dialog ue " with a computer to arrive at a solution to a problem Typicall y, this "interactive" use r is an e ngineer, sc ie ntist o r similar in a sing le glance and where necessary to make professional whose work requires substantial and modifications and revisions. Program debugging is immediate assistance fro m a computer. The 3300 wil l greatly simplified. With the 3300, the re mote computer permit thi s use r to tap the power of the re mote computer becomes a much more fl exible aid to hu man thought more effectively. processes. Data transmission rates of up to 2400 bits per Th e Datapoint 3300 screen can accommodate 25 full second are available on the Datapoint 3300. lines with 72 c haracte rs in each line-a total of 1800 Optionally avail ab le w ith the 3300 is a magnetic tape characters in a sin gle di spl ay Th e characters disp layed memory unit designed as a compan io n unit to the o n the CRT are easy to read because of the 60-CPS Datapoint 3300. This memory, which utilizes replaceable " refresh" rate and line sy nchro ni zation , which keep tape cassettes, offers the remote user the flexibility characte rs totall y stable and distinct. Th e interacti ve of both forward and reverse line-incremental playback user, through the keyboard, can add, correct, revise or of data up to a capacity of 200 full "frames" (2 5 lines of delete any line or chara cter. Th e large sc reen makes it 72 c haracters each) This stored data is avail able to the possible for him to comprehe nd, in fu ll , many problems 3300 operator upon demand.

Specifications Keyboard Dimensions Electronic, w ith Model 33 Teletype layout Width : 18 in ches including add itional controls and Height 14 in ches Screen size optional 10 key numerical en try n-key Dep th : 19 inches Standard 12 inch rectangu lar tube remover Weight: 481bs. Character size 0.16 inches x 0.11 inches Controls Model Codes Cursor: up, down, left, right, home 3300-101 Interactive CRT Terminal Number of characters up, home down 3300- 102 An swerback optio n 1800 Erase: to end of line, to end o f (factory-install ed o nly) frame 3300-1 10 Teleg raph Loop Keyer Characters per line Frame roll : up, down 3300-1 11 230 v.a.c., 50 Hz option 72 Power : on, off (factory-install ed only) Mode: remote-local se lect 3300-1 12 Auto carri age-retu rn / I in e- feed Number of lines Transmission : full duplex-half duplex deletion kit 25 select 3300-113 Coded Cu rsor Key Kit 3300-1 14 Backspace Cod ing Kit 3300-1 15 Escape Key Coding Kit Refresh rate Cursor 60 CPS, line sy nchro nized Flashing, remote or local control 3300-116 Space Over-write Latch Kit

Type of memory Input/Output Data rate MaS semiconductor 110, 150 ,220,300, 440, 600, 880, 1200. 1760, 2400 BPS Power 11 5 v.a.c ., 60 Hz, 180 watts Communication interface RS 232B or current loop TTY (u sing 3300-110) ASC II 8- level start-stop code

13 Datapoint 3300/Tape Unit

Th e Datapoint 3300 Magnetic Tape Unit is used in conjunction with the Datapoint 3300 CRT Terminal to provide a permanent record of all transactions. The Tape Unit consists of a cartridge magnetic tape transport with storage buffer and controls to provide: Reproduce-Remote Mode-Th e Tape Unit is pl aced On-line data storage under th e control of the communicati ons interface Off-line message preparation system of the CRT Term ina l. Data is reprod uced in High speed off-line message retrieval, forward and start-stop format at the speed se tting of the in terface. reverse Th e "X-on ', X-off" controls may be appli ed to provide On-line transmi ss ion automatic computer access of a message prepared Editing capability off-l ine. The data is also displ ayed on th e CRT during The CRT and Tape Unit operate as a system in the transmission. followin g modes: Record Mode-Th e Tape Unit storage buffer accepts Controls data from the CRT Terminal keyboard and communi­ Specifications Record cations interface system. Th e data is accumulated in Model Code Reproduce- Local (controll ed by bl ocks and transferred to mag netic tape. Th e data 3300-300 Datapoint 3300 ROLL contro l keys) bl ocks are form ed coin cident with disp layed data lines Reprod uce- Remote on the CRT Terminal and may be full y edited before they Tape cassette Phillips type are committed to tape. Power 25 watts (o btained from Datapo int 3300 Reproduce-Local Mode-Th e Tape Unit provides hi gh Storage capacity CRT Terminal) speed -60 characters per second-recall of the stored 450,000 c haracters per cassette data to the CRT displ ay Th e data is reproduced as a Input-Output data rate Size scroll and may be accessed in the forward or reverse Up to 2400 BPS (240 c haracters per 7.5 inc hes wide, 18 inches long, 5 inches directi ons. This mode does not interfere w ith the on-line second) hig h (styled as companio n unit to the Datapo int 3300 CRT Terminal) statu s of the Terminal and all ows the operator to review Interface previous transacti ons that have progressed off th e Operates in conjunction w ith Datapoint Weight sc reen of the CRT . 3300 CRT Term inal 12 pounds

Datapoint 3300/Data Coupler Functional Characteristics Data Rate To provide the Datapoint use r with a simple, low-cost Up to 300 bits per second Bell System compatible meth od of accessing the Modulation telephone network, Datapoint Corporat ion offers the Bell System 103 compatible, ori g inate Datapoin t 3300/ Data Co upler. The Coupler is compati ble mode with the Bell System 1 03-type Dataphones Rand Line Conditioning operates in the origin ate mode. Be ll System DOD network li nes No special lines required Th e Data Coupler provid es acousti cal coupli ng to th e teleph one network through the handset of a Be ll System Transmission Mode Full o r half duplex 500-series telephone set, eliminatin g the need of any direct electri cal connecti on. It operates at any data rate Line Interface Physical Characteristics Acoustic coupling up to 300 bits per second in full or half duplex mode. A Dimensions fully industry-compati ble (El ectronic Ind ustri es Terminal Interface Width : 11 .75 in ches Association RS-232 B) electrica l interface for inter­ EIA RS-232B Heig ht : 4.5 inc hes Depth : 11 .2 inches Auxiliary Interface connection to Datapoint terminals is provided An Weig ht: 4 pounds additionat output is also provided for use with auxiliary EIA RS-232B (Transmit onl y) teleprint ers or other devices. Operator Controls Power Requirements Full/ half duplex 115 v.a .c. 60 Hz, 12 watts Power on/off Indicator Model Code Carrier detecti on 3300-400

14 Datapoint 3300/Thermai Printer

The Datapoint Th ermal Printer unit is a li ghtwe ight, compact, econof!1ical device designed to be used with the Datapoint 3300 or Datapoint 2200 (through a communicati ons adaptor). Th e printer unit provides a hard copy record capab ility and can produce alpha­ numeric characters at speeds up to 30 characters per second. It can accept incoming data at 110, 150,220 or 300 bps Th e Th ermal Printer can serve as a satellite printer for 5 Datapoint 3300's, permitting substantial economy. Th e printer unit is fully compatible w ith the Datapoint 3300/Tape Cassette Unit and the Datapoint 3000 CRT terminal. Th e unit is cable connected to the Datapoint 3300 and utilizes standard serial data logical interfaces. Power is provided from any standard wa ll outlet. Using a standard 8- 1/ 2" paper roll , the Th erm al Printer can produce a wide variety of form atted reports, averaging less than a penny per sheet. Printing is quiet because less than 25 moving parts are used. accomplished through a thermal process utilizing a Lu brication requirements are minimal. Th e Datapoint CRT-compatible 5x7 dot matrix wh ich does not entai l 3300/Th ermal Printer and its companion un its are any mechanical impact. Because no inked ribbon is handsomely styled with so l id state construction used, the operati on is remarkably clean. Operation is throughout.

Specifications Speed selection Construction Available at 110, 150, 220 and 300 BPS Solid State through automatic selection Less than 25 moving parts Model Number 3300-200 Datapoint 3300 & 2200 Interface Character Size Standard RS232B 110" high x .082" wide Size 12" x 15" x 5W' Character Spacing Character Set 10 per inch hOrizontal 96 character ASC II , upper and lower case Weight 6 per inch vertical 24.7 pounds Print Process Model Codes Thermal, heat sensitive paper Plug-in 3300-200 Thermal Printer Standard wall outlet 3300-201 Coded Print Control Print head 3300-202 Thermal Roll Paper CRT compati ble 5x7 dot matrix Power requirement 57.5 watts Ribbon None required Print speeds Up to 30 characters per second Moving Parts Less than 25

Lubrication requirements Minimal

15 •

Datapoint 3000'lnteractive Terminal

Based on concepts proven in the Datapoint 3300, the Datapoint 3000 was developed to provide the time sharin g user with an in expensive, in teractive display terminal wi th full-screen teletypewriter compatibility. Th e terminal is attractively styled and quiet enough to fit the most critical office environment. Th e Datapoint 3000 operates at data rates of 110, 150, 220, and 300 bits/second (10, 15,20, and 30 characters per second ), and ca n be used with a Datapoint 3300 Th erm al Printer for hard copy A se parate eleven-key number pad and ten fun cti on keys provide a fun ctional keyboard arrangement.

Functional Characteristics Controls Power Requirements Cursor: up, down, right. left, home up, 11 5 v a.c., 60 Hz, 140 watts homedown Screen Size Erase: to end of line, to end of frame 12 inch rectangular tube Frame ro ll : up, down Model Codes Power: on, o ff 3000- 100 Interactive CRT Termi nal Character Size Mode: remote/local 3300-102 Answerback option 0.16" x 0.1 1" Transmission : full duplex/ half duplex (factory-install ed o nly) Rate : 11 0, 150 , 220 , 300 bits/ second 3300-1 10 Telegraph Loop Keyer Number of Characters 3300-1 11 230 v.a.c , 50 Hz option 1800 (factory-install ed only) Physical Characteristics 3300-1 12 Auto carriage-retu rn / I ine-feed Characters Per line deletion ki t 72 3300-1 13 Coded Cursor Key Kit Dimensions 3300-1 14 Backspace Coding Kit Number of lines Width : 18 in ches 3300-1 15 Escape Key Cod i ng Kit 25 Heig ht : 14 inc hes 3300- 11 6 Space Over-write Latc h Kit Dep th : 19 in ches 3300-20080 Column Print er Refresh Rate Weight: 48 1bs. 3300-201 Print Contro l option for 60 frames per second 3300-200 3300-400 Data Coupler Character Set (ASCII) 27 alphabeti c 10 numeri c 26 special

16 Datapoint 3360@/Display Unit

The Datapoi nt 3360-100 vid eo termi nal is a systems oriented term i nal, capable of 480 character-per- second operation. Screen capacity is 2000 characters , formatted as 80 characters per line, by 25 lines. In addition to the 80 characters per line, two additional characters can be printed at the left marg in separated by a space from the main text and used for line numbering or indexing of the first 24 lines. This termin al transmits serial data in an interactive or full duplex mode. In addition to the interactive mode, thi s terminal also has a block transmit mode capabl e of transmitting one complete line of data as a bl ock. Th e block transmitted data is se lected by positioning the cursor to the information desired on the screen, and block transmit is initiated by a control " 8 " received by the terminal. Th e se ri al data is transmitted in ASCII format at one of four se lected baud rates. The baud rate se lect switch Many options are avai lab le for thi s terminal , one of is physicall y located on the back panel near the lower whi ch is Auto-Tab. Thi s option extends the fl exibility left corner of the terminal. of the 3360 Terminal by providing direct cursor Th e terminal may be used where system requirements positioning to any location directed by program contro l. ca ll for a computer-controll ed buffered terminal. All Thi s opti on will also allow the terminal to search out operations with the 3360-1 00 must be on-line. No off-lin e and locate for program control the exact location of operations are possible, as the terminal must operate three separate and distinct symbols and multiple in a full-duplex manner. locations of these symbols.

Specifications Keyboard Cursor Controls Ful l uppercase ASC II Keyboard plus Up Curso r control keys featuring " n"-key ro ll over Down Cursor Terminal and 10 key numerics pad Left Curso r Screen Size Right Cu rso r Standard 12" rec tangular tube Cursor Home Up So li d or Fl as hing, on/off under program Bac k Space Character Size control Line Feed 0.16" x 0.11 " Remotely positionable Carriage Return Turn off Cursor and Printer Refresh Rate Code Type Turn On Curso r 60 cps, Line Synchro nized Seri al ASC II Start-Stop Di rect Cursor PQ si tio n

Buffer Memory Data Rate Other Control Functions 2000 Characters 300, 1200, 2400, or 4S00 baud se lectable Bell Ring Start Printer Characters per Line Electrical Interface Block Tran smit Line Cu rsor is on SO E.I.A.-RS 232B (Data Set compatible in Erase sc re en to end of line both socket and signal) Erase screen to end of frame Number of Lines 3360A 24 (p lus optional command line) Power 180 Watts, 115 v.a.c., 60 Hz

Physical Dimensions 1S" wide, 1S" long, 14" high, 4S lbs.

17 •

Datashare Video Terminal Th e Datapoint 3360-102 is the video terminal offered specifically for use with the Datashare multi-terminal timesharing system, In this application the Datashare Video Terminal communicates with a Datapoint 2200 via the Multiple Port Communications Adaptor, Screen capacity is 2000 characters formatted as 80 characters per line, by 25lin es, In add ition to the 80 characters per line, two add itional characters can be printed at the left margin separated by a space from the main text and used for line numbering or indexing of the first 24 lines, Thi s terminal transmits and receives serial data in an interactive full duplex mode to and from the Multiple Port Communications Adaptor via direct connection or over telephone lines using Data Sets, Th e serial data is transmitted in ASCII format at one of four se lectable baud rates (300 , 1200,2400, 4800) The Auto-Tab feature of the 3360-102 extends flexi­ bility by providing direct cursor positioning to any screen location from the Datashare program controlling the 3360-102 port.

Specifications Data Rate Other Control Functions 300 , 1200, 2400, 4800 baud se lectable Bell Ring Terminal Erase Screen to end of line Electrical Interface Erase Screen to end of frame Screen Size E,I,A,- RS 232B (Data Set compatible in Standard 12" rectangular tube both socket and signal) Character Size Power ,100" x ,058" 180 watts, 115 v.a .c" 50/ 60 Hz option 3360- 111 for 230 v,a,c" 50/60 Hz Refresh Rate 50/60 cps (power line frequency) Physical Dimensions 18" wide, 18" long, 14" high, 481bs, Buffer Memory 2048 Characters Cursor Controls Up Cursor Characters Per Line Down Cursor 82 Left Cursor Right Cu rsor Keyboard Home Up Full uppercase ASC II Keyboard plus Back Space control keys fea tu ring " n" -key rollover Line Feed and 10 numeri cs pad Carriage Return Turn off Cursor Cursor Turn on Cursor Flashing, onloff under program contro l Direct Cursor Positio n remotely positionable

Code Type Serial ASCII Start-Stop

18 modems or Bell Data Sets are used, each type of device Datapoint Training has a particular "handshaking " sequence. The theory and implementation of this sequence are covered along with the basic concepts of data communications. It is The Datapoint Training Center offers a se ri es of recommended that the student should attend the comprehensive courses designed to acquaint the Assembly Language course prior to the Communications programmer with the Datapoint product line. course because coding examples are offered. Databus Programming Course (5 days) Datapoint 2200/ Maintenance Training COURSE TOPICS: DATABUS is a hi gh level interpretive COU RSE TOPI CS: Datapoint 2200 maintenance training language for use on the Datapoint 2200. The statement is ava il abl e on an as needed bas is to all system and command features are specificall y ta il ored to all ow purchasers, including OEM 's. Training includes opera­ the prog rammer to qu ickly implement a task on the tion of software and diagnostics plus detail ed in struction Datapoint Tape handlers, CRT routines, print routines, on Datapoint equipment disk fi le handling routines, communications routines, arithmeti c routin es , and many other features make Datapoint Documentation DATABUS a powerful programming tool. Programmers Datapoint Corporati on makes ava il ab le a complete roster with busi ness appli cations will find this course helpful in of documentati on and support literature for each of the constructin g software systems in a short time. Datapoint products. Th ese are designed to give the user fu ll information on the capability of these systems and Datapoint 2200/ Assembly Language Programming how they can be put to work most effectively. Al l of these Course (5 days) materials are available through Datapoint fi eld sa les CO UR SE TOPICS: This course all ows a programmer to offi ces or from Corporate headquarters. ga in a detailed in sight into the arch itecture and assembly level language of th e Datapoint 2200. Th e course wi ll Datapoint Supplies provid e not onl y the knowledge of th e Datapoint's central To insure that your Datapoin t equ ipment maintains top processor operati on, but familiarity with tape, keyboard, efficiency, Datapoint Corporation constantly evalu ates and CRT programming Thi s approach yields an overall the support materials that a smooth running data ab ility with the 2200 so that the programmer or analyst processin g organization depends upon. can apply itto hi s appli cati on in minim um time. Th e course assum es so me prior knowledge of machine and Cassette Tapes assembly level language, but many compiler levellan­ Magnetic tapes for the Datapoint 2200 and 3300 units guage programmers have found the assembly language are expected to have a long operating life under heavy stra ightforward and have had no difficulty in implement­ business usage. To meet this goal, the cassette tape ing a program. supplied by Datapoint Corporation is not on ly digitall y verified for consistency, but also indiv idually checked Datapoint 2200/ Disk Programming for a smooth , non-wearing oxide coatin g. On ly Datapoint (2 days) cassette tapes w ill insure an error free and long life for Datapoint provides a powerful Di sk Operating System your tape system. to be used in conjunction with a Datapoint 2200 and Di sk. Model Code: 2200-150 Cassette Tape, 300 feet Th is course covers th e fil e structure of the Datapoint 2200-161 Blank Tape Labels DOS, the subroutines avail able and the powerful interrupt hand ler. Th e Assembly Lang uage Prog ramming Printer Supplies course is a prerequisite for the DOS. A complete line of printing materials is ava il able for your Datapoint. Model Codes: 2200-202 Ink roller for 2200/ Pri nter Datapoint 2200/Peripheral Programming (1 day) 2200-260 Servo Cloth Ribbon COURSE TOPICS: For systems havin g add iti onal 2200-261 Servo Carbon Ribbon devices such as printers, tapes, card readers and disks, 2200-270 Servo Courier 72 Printwheel this course wil l provide the prog rammer with a thorough 2200-271 Servo Pi ca Printwheel knowledge of each device. Both software and hardware 2200-272 Servo Elite Printwheel aspects are covered. 3300-202 Paper for 3300/Therm al Printer Datapoint 2200/Communications Programming Course Coding Pads (2 days) 2200-151 Pad of cod ing forms, 25 / Pad . Pad is su itable COURSE TOPICS: Special programming techniques are for use with Assembly Language or DATABUS, a hi gh used to construct a system with data communications by level language. direct-line or modem. Communications programs in volve procedures directing hardware to foll ow a specific sequence of events. Whether Datapoint-manufactured

19 For further information on Datapoint products, please write or call the Datapoint Corporation office nearest you . • ao~ Oln

Home Office: Sales Representatives: 9725 Datapoint Drive/ San Antonio, AIDES, Inc./Lawrence, Kansas/ (913) 842-1147 Texas 78284/ (512) 696-4520 AIDES , Inc./Omaha, Nebraska! (402) 397-0166 AIDES, Inc./Kansas City, Missouri/ (816) 781-0400 Direct Sales Offices: AIDES, Inc'/St. Louis, Missouri/ (314) 721-4205 Atlanta (404) 458-6423 PLS Associates/Denver, Colorado/ (303) 771 -0140 Chicago (312) 671-5310 PLS Associates/Albuquerque, New Mexico/ (505) 255-0120 Cleveland (216) 921-9200 PLS Associates/Salt Lake City, Utah/ (801) 272-3681 Dallas (214) 630-1342 Detroit (313) 557-6092 International Sales Representatives: Greensboro (919) 299-8401 AUSTRALIA/Sigma Data/Australia (PTY) Ltd./Sydney Houston (713) 688-5791 BELGUIM/Sait Electronics/Brussels/Telex : 846-21601 Los Angeles (213) 645-5400 Minneapolis (612) 854-4054 CANADA/TRW Data Systems/Scarborough/ (416) 438-9800 ; Telex: 06-23166 Newark (201) 568-1225 DENMARK/Regnecentralen/Hovedvejen 9/Telex: 855-15468 New York (212) 759-4656 ENGLANDlVentek, Ltd.ILondon/Telex: 851-923038 FINLAND/Oy Nokia Ab Electronics/Helsinki/Telex: 857-12579 Ph iladelphia (215) 643-5767 FRANCE/Matra S.A./Paris/Telex: 842-62777 Phoenix (602) 265-3909 _ GERMANY/Gier Electronics G.m.b.H/Hanover/Telex: 841-923449 Portland (503) 244-0101 HAWAII/The Systems Corporation/Honolulu/ (808) 955-6638/Telex: 723414 San Francisco (415) 968-7020 HOLLAND/Regnecentralen/Rotterdam 3/Telex: 844-24078 Washington D.C. (703) 525-6924 ISRAEL/I.S. Information Systems, Ltd./Ramat Abiv/Telex : 922-33816 JAPAN/CJK Company, Ltd./Tokoyo/Telex: 781-02322315 MEXICO/Control Y Proceso Electronico, S.A./Mexico·City/ (905) 563-9902 NORWAY/SCANIPS/Oslo/Telex: 856-18549 SOUTH AFRICA/Computer Advances/Johannesburg/Telex: 960-430774 SWEDEN/Nokia Ab Electronik/Hagersten/Telex : 854-1802 SWITZERLAND/TRW Communications/Lyss/Berne/Telex : 845-34446 U.S.A./TRW Electronics-International/Los Angeles/Telex : 674593

COPYRIGHT © 1973 BY DATAPOINT CORPORATION 0973 PRINTED IN USA