CONTENTS WELCOME CONGRESS CHAIRS AND COMMITTEES VENUE OVERVIEW GENERAL INFORMATION PROGRAMME OVERVIEW SCIENTIFIC PROGRAM POSTER LIST

Notice

For a number of events (congress meal，banquet，social events)，the organizers will scan the delegates personnel badges for entrance. Please present the delegates personnel badge upon request. If you are not able to present your delegates personnel badge, you may be refused access to this function. Congress secretariat

Chinese Heat Treatment Society

Secretary general Prof. Li Qiao Tel：+86 135 2116 0662

Contact 1 Ms. Zhi Tel：+86 1870 150 0804

Contact 2 Mr. Han Chong Tel：+86 1561 1919 886

Contact 3 Mr. Minghao Tel：+86 1511 6917 601

Contact 4 Mr. Tian Mingda Tel：+86 1761 1157 882

Contact 5 Ms. Han Yongzhen Tel：+86 1831 0760 722

Contact 6 Mr. Fu Haifeng Tel：+86 1348 8845 708 Transportation Guide

From Airport

Airport Suttle bus：the most direct and might cost 1 hour 48 minutes, 25CNY.

Take the Airport-Qujiang Bus in Terminal 2 BUS station. Get off the bus at Qujiang Ramada Hotel Station.

From Xi’an North Railway Station

By Metro, 1hour, 7CNY

Guests could take Metro line 2 in Xi'an north railway station to the venue （Huizhanzhongxin station，exit from C） Welcome Message Welcome to the 25th congress of international federation for heat treatment and surface engineering in Xi’an

It is a great pleasure for IFHTSE to welcome participants to the 25th Congress. We have held many events in China in collaboration with our colleagues in CMES, in particular those in the Chinese Heat Treatment Society. All have been successful in providing a platform for the presentation and discussion of state-of-the-art knowledge in heat treatment, surface engineering.

The 25th Congress now represents an excellent opportunity to build upon past successes and take a global view of the industry and its underlying science in the second decade of the 21st Century. We are grateful to the national organisers and to the international committees for building an attractive working and social programme.

Apart from the technological and scientific specifics, we are very proud of the many contacts and collaborative actions which have resulted from these Congresses and conferences. This essential informal communication is of great benefit to knowledge transfer. Not least important in the history of these events are the many close personal contacts and, indeed, friendships which have resulted. We are sure that this excellent interaction will continue and flourish.

Congress co-chairman Executive chairman Prof. Zhou Yu Dr. Scott MacKenzie Prof. Xu Kewei President of Chinese Heat Treatment President of IFHTSE Past President of IFHTSE 2012-13 Society Congress Committee Co-Chairman: Executive Chairman:

Prof. Zhou Yu [China] Dr. Scott Mackenzie [USA] Prof. Xu Kewei [China] Academician of CAE, President of IFHTSE Past President of IFHTSE 2012-13 President of Chinese Heat Treatment Society

International Advisory Committee: Prof. Arkadiy K. Tikhonov [Russia] CNIITMASH Prof. Dr. CUI Kun [China] Academician of CAE, Huazhong University of Science and Technology Prof. Dr. CHEN Yunbo [China] Academician of CAE, China Academy of Machinery Science and Technology(CAM) Prof. Dr. DING Chuanxian [China] Academician of CAE, Institute of Microsystem and Information Technology (SIMIT) Dr. Eva Troell [Sweden] IVF, IFHTSE Executive Committee Dr. FU Hengzhi [China] Academician of CAE, Northwestern Polytechnical University Dr. George Totten [USA] Portland State University, formerly IFHTSE Executive Committee Prof. Dr. Hans-Werner Zoch [Germany] IWT Bemem, Past President of IFHTSE 2010-11 Dr. Imre Felde [Hungary] Treasurer of IFHTSE, buda University Dr. Larisa Petrova [Russia] MADI University, IFHTSE Executive Committee Prof. Leontin Druga [Romania] ATTIS Prof. Dr. LI Helin [China] Academician of CAE, CNPC Tubular Goods Research Institute (TGRI) Prof. Dr. LI Peigen [China] President of Chinese Mechanical Engineering Society, Academician of CAE Prof. Dr. LI Yinghong [China] Air Force Engineering University, Academician of CAS Prof. Dr. LU Ke [China] Institute of Metal Research (IMR), Chinese Academy of Sciences, Academician of CAS Prof. Masahiro Okumiya [Japan] Toyota Technological Institute, IFHTSE Executive Committee Dr. Massimo Pellizari [Italy] University of Trento, IFHTSE Executive Committee Prof. Dr. PAN Jiansheng [China] Shanghai Jiao Tong University, Academician of CAE Dr. Patrick Jacquot [France] Bodycote (Belgium, France, Italy) President of IFHTSE 2016-17 Prof. Reinhold Schneider [Austria] TU Upper Austria Wels, Past President of IFHTSE 2014-15 Simon Blantern [UK] Bodycote, IFHTSE Executive Committee Prof. Sohn Myung Jin [Korea] President of Korean Society for Heat Treatment Dr. Stefan Hock [Italy] IFHTSE Secretary-general Prof. Dr. [China] Academician of CAE, University of Arts and Science Prof. Decheng [China] President of China Academy of Machinery Science and Technology (CAM) Prof. Dr. WANG Guodong [China] Academician of CAE, Northeastern University Prof. Dr. WANG Yide [China] Academician of CAE, Iron & Steel (Group) Co., Ltd. Prof. Dr. WEI Bingbo [China] Academician of CAS, Northwestern Polytechnical University Prof. Dr. XU Binshi [China] Academician of CAE Prof. Dr. XU Huibin [China] Academician of CAE, Prof. Dr. XUE Qunji [China] Academician of CAE, Lanzhou Institute of Chemical Physics (LICP) Prof. Yoshinao Mishima [Japan] Tokyo Institute of Technology Prof. Dr. ZHAO Liancheng [China] Academician of CAE, Harbin Institute of Technology Prof. Dr. ZHAO Zhenye [China] Academician of CAE, AVIC Institute of Aeronautical Materials Prof. Dr. ZHOU Kesong [China] Academician of CAE, Guangzhou Research Institute of Non-ferrous Metals Dr. Zoltgn Kolozsvgry [Romania] SC Plasmaterm SA, Past President of IFHTSE 1998-99 Academic Committee

Prof. LU Jian Prof. WANG HuaMing City University of Beihang University

Prof.A.L. Yerokhin (University of Manchester) Dr. CHEN Nailu (Shanghai Jiao Tong University) Prof. CHENG Xiaonong ( University) Prof. DONG Chuang (Dalian University of Technology) Prof. DONG Hanshan (University of Birmingham) Prof. DU Zhenmin (University of Science and Technology Beijing) Prof. FENG Yaorong (CNPC Tubular Goods Research Institute） Prof. GU Jianfeng (Shanghai Jiao Tong University) Prof. JIANG Bailing (Xi’an University of Science and Technology) Prof. JIANG Chuanhai (Shanhai Jiao Tong University) Dr. Klaus Löser(ALD Vacuum Technologies GmbH) Prof. LI Changjiu (Xi’an Jiaotong University） Prof. LI Chengming (University of Science and Technology Beijing) Prof. LI Zhou (） Prof. LIU Ping ( of Science and Technology) Prof. LIU Zhengdong (Central Iron & Steel Research Institute) Prof. MA Fei (Xi’an Jiaotong University) Prof. Marcela Bilek (The University of Sydney) Prof. Narazaki Michiharu (Saitama Institute of Technology) Prof. OKUMIYA Masahiro (Toyota Institute of Technology) Prof. OUYANG Jia-Hu (Harbin Institute of Technology) Prof. REN Ruiming (Dalian Jiaotong University) Prof. SHANG (University of Science and Technology） Assoc Prof. SHI Jing (University of Cincinnati) Prof. SONG Kexing ( University of Science and Technology) Prof. Vincent Ji (Paris-Sud University) Prof. WANG Lei (Northeastern University) Dr. Watanabe Youichi (Nihon Parkerizing Co., Ltd.) Prof. WU Yucheng (Taiyuan University of Technology) Prof. XU BingShe (Taiyuan University of Technology) Prof. XUE Wenbin (Beijing Normal University) Prof. YAN Mufu (Harbin Institute of Technology) Prof. YANG Zhenguo (Department of Materials Science, ) Prof. YAO Jianhua ( University of Technology) Prof. YAO Kefu () Prof. ZHU Minhao (Southwestern Jiaotong University) Local Organizing Committee

Prof. JU Dongying Prof. XU Yueming Saitama Institute of Technology Beijing Research Institute of Mechanical & Electrical Technology Ltd.

DONG Xiaohong ( Strong Metal Technology Co., Ltd.) Prof HE Binfeng (Xi’an University) IIDA Miyabi (Japan Society of Heat Treatment) LI Qiao (Chinese Heat Treatment Society) Prof. LI Ruguan ( Research Institute of Materials Ltd.) LIU Yedong (SECO/WARWICK Group) Prof. MA Dayan (Xi’an Jiaotong University) Prof. MENG Chongyun (Standard Research Institute, China North Industries Group Corporation) Prof. PAN Lin ( Research Institute of Materials Protection) Prof. REN Ruiming (Dalian Jiaotong University) SHAO Zhoujun (Chinese Heat Treatment Society) Prof. SHI Wei (Tsinghua University) WANG Wenbin ( Sirui Advanced Materials Co., Ltd.) Prof. WANG Yujin (Harbin Institute of Technology) Dr. Watanabe Youichi (Nihon Parkerizing Co., Ltd.) Prof. WEN Jiuba (Henan University of Science and Technology) Prof. XIA Yuan (Institute of Mechanics, Chinese Academy of Science) Prof. XU Wei (Northeastern University) YANG Hongfei (Xi’an Filt Heat Treatment Co., Ltd.) YANG Yanqing (Northwestern Polytechnical University) Prof. YE Haitao (Aston University, UK) ZENG Aiqun (IVA Schmetz Industrial Furnaces(Shanghai) Co., Ltd.) Prof. ZHANG Guanjun (CNPC Tubular Goods Research Institute) Prof. ZHANG Yunliang (Xi’an University) Prof. ZHOU Genshu (Xi’an Jiaotong University) Prof. ZHU Sheng (National Key Laboratory of Remanufacturing) ZHU Wenming (Jiangsu Fengdong Thermal Technology Co. Ltd, ) Venue Overview General Information Registration / Information Desk September 11: 13:00-22:00 September 12: 08:00-10:30 Registration / Information Desk location Xi’an Qujiang International Conference Center All delegates will receive their name badge, meeting documents and all relevant congress information upon arrive at Xi’an Qujiang International Conference Center. Xi’an Qujiang International Conference Center, No.15, Huixin Road, Qujiang Speaker Presentations New District, Xi'an, Presenters must check in their presentation to China the technician on site before they are due to speak. Presentations can be check in during tea/coffee/lunch breaks or prior to the morning session. Please be at the front of the stage 10 minutes before the start of your session begins. Speaker ready desk open time September 11 13:00-18:00 September 12 08:00-18:00 Poster information Plenary Lecture Room-Page1 All poster papers will be displayed in the specific poster areas located in central hall, on the 3th floors of the Conference Center. Presenters posters can be put up from 18:00 on September 11 and must be taken down by 18:00 on September 13. Exhibition Opening Hour September 12-13 : 08:00-18:00

Session Room: Advanced Materials and Heat Treatment-Room 205-Page5 Chemical-thermo treatment-Room 206-Page7 Quenchant, quenching and distortion control-Room 207-Page11 Non-ferrous Metals, Cu, Al, Mg, Ti alloy, and etc-Room 208-Page13 Heat Treatment and Surface Engineering for Key Parts and Components Industries-Room 209-Page9 Heat Treatment and Surface Engineering in Energy Industry-Room 210-Page15 2018 全国热处理青年工作者大会-Room 204 Special program

Welcome Reception September 11 : 18:30-19:30 Welcome Reception location The welcome reception will take place at the Lily Hall. Note：this is an informal evening open to all delegates at no extra cost. Delegates Session Room ： personnel badge is required. Thermal Spray-Room 303-Page26 Opening Ceremony Solid State Phase Transfromation-Room 304-Page3 September 12 08:30-09:10 Failure Analysis-Room 306-Page31 Location New Technologies for Hard and Superhard Thin Films-Room 307 (Morning)-Page18 Lotus Hall Modelling and Simulation-Room 307(Afternoon)-Page12 Tom Bell Young Author Award and 25 Functional Surfaces and Coatings-Room 308-Page23-25 IFHTSE Congress High-power Impulse Magnetron Sputtering (HiPIMS)-Room 309(Morning)—Page19 Young researchers scholarship (25YRS) Plasma Electrolysis and Dishcarge Deposition (Technology)-Room311（All day）&309 Ceremony (Afternoon) —Page20-22 September 13 18:30-19:00 Microstructure and Properties-Room 312-Page33 Location Characterization and Evaluation of Residual Stress；Shot Peening-Room 313-Page29 Lotus Hall Frictional and Wear-Room 310-Page28 Congress meals September 12-13 Lunch: 12:00-13:00 Location Lily Hall September 12 Dinner: 17:40-18:40 Location Lily Hall Banquet September 13 18:30-20:00 Location Session room： Lotus Hall Solidification-Room 402-Page2 High Energy Beam Surface Engineering and Additive Manufacturing-Room * All the congress meals will take place at the Lily 405-Page16 Hall (Banquet is in Lotus Hall). This is included in the registration fee and open to all delegates. Congress Exhibition & Poster Area Delegates personnel badge is required. Location outside the lotus Hall Sponsored by: Xi’an Flit Heat Treatment Co., Ltd Shaanxi Sirui Advanced Materials Co.,Ltd Jiangsu Fengdong Thermal Technology Co.,Ltd Guangdong Strong Metal Technology Co.,Ltd Nanjing Kerun Lubricants Co.,Ltd PVA Industrial Vacuum Systems Gmbh Sandvik International Trading (Shanghai) Co.,Ltd Houghton International Inc. Program at a Glance

September 11, Tuesday

13:00-22:00 Registration Desk Open Xi’an Qujiang International Conference Center

10:00-15:00 IFHTSE Executive Committee meeting Room 205

15:30-18:00 IFHTSE Governing Council Assembly Room 205

14:00-16:30 中国机械工程学会热处理分会第十届第三次理事扩大会议 Room 405

14:30-18:00 Workshop on Phase Transformation Crystallography and Room 206

Methodology

16:00-18:00 How to successfully contribute to the world of scientific publishing Room 207

a presentation meant for the aspiring author or reviewer

16:30-20:00 中国机械工程学会热处理分会青工委成立 30 周年纪念活动 玉兰厅

18:00-19:30 Reception Lily Hall

September12, Wednesday

08:00-10:30 Registration Desk Open Xi’an Qujiang International Conference Center

08:30-09:10 Opening ceremony Lotus Hall

09:15-12:00 Plenary Lecture Lotus Hall

12:00-13:00 Lunch Lily Hall

13:30-17:35 Plenary Lecture Lotus Hall

17:40-18:40 Dinner Lily Hall

Chang'an Impression--Grand Welcoming Ceremony of Tang **Organized by Xi'an government.Invited only， 21:00-23:00 Dynasty invitation is required

September 13, Thursday

Symposium sessions Room：

08:00-12:00 204，205,206,207,208,209,210,303,304,306,307,

308,309,310,311,312,313,402,405

12:00-13:00 Lunch Lily Hall

Symposium sessions Room： 13:00-18:00 204，205,206,207,208,209,210,303,304,306,307,

308,309,310,311,312,313,402,405

Tom Bell Young Author Award and 25 IFHTSE Congress Lotus Hall 18:30-20:00 Young Author Award Ceremony/Banquet

September 14, Friday

Symposium sessions Room： 08:00-12:00 306,308,311

Tour to the Terracotta Army of the 1st Qin Shi **Overseas Delegates only, ticket is required. 13:00-17:30 Huang in the afternoon 12 September 2018 • Opening Ceremony • Plenary lecture Room: Lotus Hall

08:30-09:10 Opening Ceremony Chair：Prof Kewei Xu

Plenary lecture Session Chair：Prof Huaming Wang，Prof Dongying Ju

Prof. Zhao Zhenye [China] Academician of CAE, AVIC 09:15-10:00 Beijing Institute of Aeronautical Materials Presentation Title: Development of Heat Treatment and Surface Layer Modification Technology in China

10:00-10:20 Tea Break Prof. Sarah Hainsworth [Britain] Aston University Pro-Vice-Chancellor and Executive Dean 10:20-11:05 School of Engineering and Applied Science Presentation Title: Diamond-like Carbon Coatings For Tribological Applications

Prof. LU Jian [China] City University of Hong Kong 11:05-11:50 Vice President (R&T) and Dean of Graduate Studies Presentation Title: Surface Nanocrystalization: From Nanostructure to Suprananostructure

12:00-13:00 Lunch

Plenary lecture Session Chair：Prof Chengjia Shang， Prof Chuang Dong

Prof. Miyamoto Goro [Japan] Institute for Materials Research 13:30-14:15 Tohoku University Presentation Title: Strengthening of Steels by Solute Cclusters or Nano-sized Precipitates

Dr. Thomas Waldenmaier [Germany] Material Development and Heat Treatment Metals (CR/APM4) 14:15-15:00 Robert Bosch GmbH Presentation Title: Upcoming Developments and Challenges in Industrial Heat Treatment

15:00-15:30 Tea Break / Poster

Dr. Aleksey Yerokhin [Britain] The University of Manchester 15:30-16:15 Presentation Title: Intelligent Electrolytic Plasma Technologies for Multifunctional and Smart Surfaces

Prof. Masato Enomoto [Japan] Ibaraki University 16:15-17:00 Presentation Title: Current status of understanding of alloy element effects on ɑ/ɡ transformations in steel

Dr. Herwig Altena [Austria] AICHELIN Holding G.m.b.H Ltg. Forschung und Entwicklung, Manager R&D 17:00-17:45 Presentation Title: Weight Reduction of Automotive Components by Optimized Heat Treatment Processes

- 1 - 13 September 2018 • Solidification Room: 402

Chair：Prof. Chengjia Shang Session Chairs: Prof. Lin Liu , Prof. Chengjia Shang Time Title Page Kinetic process of homogenization pores growth during homogenization for nickel-base single crystal superalloys 08:30-08:50 Yanbin Zhang, Lin Liu, Taiwen Huang, Hengzhi Fu 1 Northwestern Polytechnical Universit Analysis of free dendritic growth considering nonisothermal and nonisosolutal interface and relaxation effect 08:50-09:10 1Shucheng Liu, 2Shu Li, 1Lihua Liu 2 1Harbin Institute of Technology; 2Harbin University of Science and Technology Modeling concentrated multi-component dendrite growth in vertical twin-roll casting 09:10-09:30 Yubing Zhang, Feng Liu 3 Northwestern Polytechnical University

Competitive growth of Al2O3/Y3Al5O12/ZrO2 in the eutectic ceramic during directional solidification: Effect of interface strain energy 09:30-09:50 1Xu Wang, 2Jingyang Wang, 2Langhong Lou, 2Jian Zhang 26 1School of Materials Science and Engineering, Xi’an University of Technology, 5 South Jinhua Road, Xi’an 710048, China, 2Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, China 09:50-10:10 Tea Break Centerline inhomogeneity of flat products 10:10-10:30 M. Réger 4 Óbuda University The influence of centerline segregation on the mechanical performance and microstructure of X70 pipeline steel Guo1, 1Xuelin Wang, 1Wenle Liu, 1Chengjia Shang, 2Hua Wang, 2Tan Zhao, 2Chunlin Peng 10:30-10:50 27 1Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, China, 2Technology Center, Anshan Iron and Steel Group Company, Anshan, 114009, China Thermal stability of directionally solidified NiAl-Cr(Mo) eutectic lamellar structure 1Lei Wang, 2Jun Shen, 1Guojun Zhang, 3Hengzhi Fu 10:50-11:10 1School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048, China, 2State Key Laboratory of 5 Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China, 3State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China Mechanism of competitive converging grains growth during directional solidification of Ni-base Bi-crystal superalloys 11:10-11:30 Songsong Hu, Lin Liu, Qiangwei Cui, Wenchao Yang, Taiwen Huang, Jun Zhang 6 State Key Laboratory of Solidification Processing, Northwestern Polytechnical University 12:00-13:00 Lunch Session Chairs:Prof. Wenzheng Zhang , Prof. Chengwu Zheng Time Title Page In-situ TEM study of interface migration associated with the growth of austenite precipitates 13:30-13:50 1Juan Du, 1Wenzheng Zhang, 2Frédéric Mompiou, 1Zhipeng Sun 8 1Tsinghua University, 2CEMES-CNRS On the mechanism of nano-scale twin formation in high strength pipeline steels 13:50-14:10 Jiming Zhang, Yanshan Zhu, Han Ma, Ping Du, Jinbo Qu 9 Institute of Research of Iron and Steel, Shasteel The influence of hydrostatic pressure on austenite reversion transformation 14:10-14:30 Yucong Hua 10 Northwestern Polytechnical University Analysis of the effect of alloying elements on the microcosmic thermodynamics and kinetics of martensite transformation based on ab initio simulation in steel 14:30-14:50 12 Tianle Wang, Feng Liu Northwestern Polytechnical University Study on microstructure evolution and strengthening mechanism of vanadium microalloyed Dual-Phase (DP) steel 14:50-15:10 11 Jingbin Zhang, Feng Liu

- 2 - Northwestern Polytechnical University 15:10-15:30 Tea Break Application of cellular automaton approach in modeling the austenite-to-ferrite transformation in steels 15:30-15:50 Chengwu Zheng 28 Institute of Metal Research, Chinese Academy of Sciences Experimental investigation of massive transformation in ultra-low carbon steel 15:50-16:10 1hengchang Lu, 1Jianhui Liu, 1Cunyu Wang, 1Li Meng, 2Han Dong 28 1Central Iron & Steel Research Institute, 2Shanghai University Microstructure of strain induced martensite in high carbon steel 16:10-16:30 Yulin Chen, Xinqing Zhao 14 Beihang University Effects of Mo/Zr minor-alloying on the phase precipitation behavior in modified 310S austenitic stainless steels at 700℃ 16:30-16:50 1Donghui Wen, 1Qing Wang, 2Rui Tang, 1Chuang Dong 29 1Dalian University of Technology, 2Nuclear Power Institute of China Numerical simulation of hydrogen diffusion behaviors in dual phase steel 16:50-17:10 1Bangshu Yang, 1Lin Cheng, 1Xian Zhang, 1Jing Liu, 2Feng Hu, 1Kaiming Wu 15 1Wuhan University of Science and Technology, 2Nanjing Iron & Steel United Co., Ltd. Influences of retained austenite on impact toughness in medium-carbon micro/nano-structured steels 17:10-17:30 1Yajie Wu, 2Feng Hu, 1Lin Cheng, 1Gang Huang, 1Kaiming Wu 16 1Wuhan University of Science and Technology, 2Nanjing Iron & Steel United Co., Ltd. 17:30-17:50 Influence of intercritical quenching heat treatment on the mechanical properties of a high nickel steel 1Guojin Sun, 2Mingke Li, 1Zhiyuan ZHANG, 1Demei ZHAI, 1Guang SU 26 1Henan Institute of Technology, 2HENAN TIANLI THERMAL EQUIPMENT CO., LTD.

13 September 2018 • Solid State Phase Transfromation Room:304

Chair：Prof Chengjia Shang

Session Chairs: Feng Liu, Qing Wang

Time Title Page Designing of coherent microstructure with cuboidal nanoprecipitates in multi-component alloys 08:30-08:50 Qing Wang, Chuang Dong 29 Dalian University of Technology Effect of disorder-order transition of AlxCoCrFeNi high entropy alloy film on electrical resistivity temperature behavior 08:50-09:10 Chenyu Wang 17 Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology Grain boundary-constrained reverse austenite transformation in nanostructured Fe alloy: model and application 1Linke Huang, 1Weitong Lin, 1Kang Wang, 1Shaojie Song, 1Can Guo, 1Yuzeng Chen, 2Yujiao Li, 1Feng Liu 09:10-09:30 30 1State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an, Shaanxi 710072, P.R. China, 2ZGH, Ruhr-University Bochum, Universitätsstr, 150, 44801 Bochum, Germany

Research on the relationship between properties and microstructure of Cu4Ni3M(M=Al, Cr, Mo) alloys 09:30-09:50 Zhumin Li 18 Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology 09:50-10:10 Tea Break On composition and growth mechanism of LPSO structure in an Mg-Zn-Gd alloy 10:10-10:30 Xinfu Gu 30 University of Science and Technology Beijing

- 3 - Pinning of coherent particles on moving plane grain boundary 10:30-10:50 Haoran Peng, Feng Liu 19 State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an, 710072, P. R. China Phase Transformation of Martensite-Austenite Constituent in the Intercritically Reheated Coarse-Grained Heat-affected Zone of High Strength Pipeline Steels 10:50-11:10 1Xueda Li, 2Chengjia Shang, 3Xiaoping Ma, 4Baptiste Gault, 3S.V. Subramanian, 1Jianbo Sun _ 1China University of Petroleum (East China), China, 2University of Science and Technology Beijing, China, 3McMaster University, Canada, 4Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, Germany Enhanced strength and ductility of A356 cast aluminum due to composite effect of non-equilibrium solidification and

11:10-11:30 thermo-mechanical treatment 33 Xu Zhang, Linke Huang, Yuzeng Chen, Feng Liu State Key Laboratory of Solidification Processing, Northwestern Poly-technical University Multi-scale modeling of the complex microstructural evolution in structural phase transformations 11:30-11:50 Lin Zhang, Kang Wang, Feng Liu 20 State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an, Shaanxi 710072, P.R. China 12:00-13:00 Lunch

Session Chairs: Prof. Chuang Dong, Prof. Jinbo Qu

Time Title Page Correlation between electrical resistivity and microhardness of Cu alloys via a short-range-order cluster model 13:30-13:50 Chuang Dong 31 Key Laboratory of Materials Modification, Dalian University of Technology Chemical short-range orders and the induced structural transition in high-entropy alloys 13:50-14:10 Yue Ma, Qing Wang, Chuang Dong 31 Dalian University of Technology Multi-stage martensitic transformation behaviors and microstructural characteristics of Ti-Ni-Hf high temperature shape

14:10-14:30 memory alloy powders _ Xiaoyang Yi, Xianglong Meng, Zhiyong Gao, Wei Cai Harbin Institute of Technology Characterization of TiNiCuNb shape memory alloys with excellent thermal cycling stability 14:30-14:50 1Yunxiang Tong, 1WenYin Qi, 1Li Li, 1Feng Chen, 1Bing Tian, 2Yufeng Zheng 21 1Harbin Engineering University, 2Peking University

Heterogeneous nucleation research on YAlO3(001)/NbC(100) interface 14:50-15:10 Zhijun Shi, Sha Liu, Yefei Zhou, Xiaolei Xing, Changchun Zhao, Qingxiang Yang 22 Yanshan University

Heat-resistant Cux[Ni3M1] film with g'-Ni3M phase precipitation strengthening 15:10-15:30 Xiaotian Cheng 23 Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology 15:30-15:50 Tea Break

The heterogeneous nuclei effect of MgAl2O4 in NbC reinforced Fe matrix coating 15:50-16:10 Changchun Zhao, Xiaolei Xing, Yefei Zhou, Zhijun Shi, Qingxiang Yang 24 Yanshan University

A Crystallographic analysis of the Ceramic Eutectic of Al2O3/c-ZrO2(Y2O3) 16:10-16:30 Ya Kun Wang, Fei Ye, Guoqing Chen, Liansheng Fu _ School of Materials Science and Technology, Dalian University of Technology

The microstructure and property characterization of Al0.4CoCu0.6NiSi0.2 high entropy alloy powder for additive remanufacturing prepared by gas atomization 16:30-16:50 1Yongixng Chen, 1Sheng Zhu, 1Xiaoming Wang, 1Liu Qiu, 1Guofeng Han, 2Shu Wen 32 1National Key Laboratory for Remanufacturing, Army Academy of Armored Forces, 2School of Materials Science and Engineering, Xiangtan University Development of EET method and its application 16:50-17:10 Cheng Lin, Guili Yin, Jianzhong Wang 27 School of materials science and engineering, of technology, China, 121001

- 4 - 13 September 2018 • Advanced Materials and Heat Treatment Room: 205

Chair：Prof. Kefu Yao, Prof. Yujin Wang Session Chair：Prof.Zhirong He, Prof.Kefu Yao Time Title Page ★ A research on high-entropy alloys 08:00-08:30 Kefu Yao, Heng-Wei Luan, Zhi-Dong Han 63 School of Materials Science and Engineering, Tsinghua University, China ★ Microstructure and properties design in the laser cladded high-entropy alloy coatings through aging treatment 08:30-09:00 Yi-Zhu He, Hui Zhang, Ye Pan 63 School of Materials Science and Engineering, University of Technology, China Effect of Ti substitution for Al on the cuboidal nanoprecipitates in Al0.7NiCoFeCr2 high entropy alloy 09:00-09:18 Chunling Li, Qing Wang, Chuang Dong 64 School of Materials Science and Engineering, Dalian University of Technology, China Effects of long-time thermal exposure on the microstructure and mechanical properties of CrMnFeCoNiAl0.25 high entropy alloy 09:18-09:36 47 Zhihong Zhong, Lijing Lin, Xin Xian, Yucheng Wu University of Technology, China Influence of the quenching and partitioning process on the isothermal bainitic transformation kinetics in a lean medium manganese steel 09:36-09:54 48 Simone Kaar, Reinhold Schneider, Daniel Krizan, Coline Béal, Christof Sommitsch University of Applied Sciences Upper Austria, Austria Effect of annealing on transformation, microstructure and tensile properties of narrow hysteresis Ti-45Ni-5Cu-0.3Cr shape memory alloy 09:54-10:12 52 Yuqing Du, Zhirong He, Hui Feng, Kangkai Liu School of Materials Science and Engineering, Shaanxi University of Technology, China 10:12-10:25 Tea Break Session Chair：Prof.Kefu Yao, Prof. Zhirong He ★ Microstructure, transformation and superelasticity characteristics of annealed Ti-Ni-Cr shape memory alloy 10:25-10:55 Zhirong He, Kangkai Liu, Hui Feng, Yuqing Du 50 School of Materials Science and Engineering, Shaanxi University of Technology, China Effect of annealing on transformation and shape memory effect of Ti-50.8Ni-0.1Nb shape memory alloy wire 10:55-11:13 Kangkai Liu, Zhirong He, Hui Feng, Yuqing Du 54 School of Materials Science and Engineering, Shaanxi University of Technology, China Effect of annealing on phase transformation and superelasticity of Ti-51.1Ni shape memory alloy 11:13-11:31 Hui Feng, Zhirong He, Kangkai Liu, Yuqing Du, Rongyao Ji 56 School of Materials Science and Engineering, Shaanxi University of Technology, China Microstructure evolution, mechanical behaviors and ballistic performance of the laminated composite of TiB2-based ceramic and titanium alloy with nano-structured gradient 11:31-11:49 Zhongmin Zhao Department of vehicle and electric engineering, Shijiazhuang School, Army Engineering University, China Flash lamp annealing of indium tin oxide thin-films deposited on polyimide backplanes 11:49-12:07 Seungho Park, Yoonsuk Kim 64 Hongik University, South Korea 12:00-13:00 Lunch Session Chair：Prof.Yizhu He, Prof.Zhongmin Zhao ★ Effect of cryogenic treatment on microstructure and properties of D2 tool steel 13:00-13:30 Matteo Villa, Chloé Devos, Mikkel F. Hansen, Seunghwan Lee, Marcel AJ Somers 61 Technical University of Denmark, DK ★Control of thermal expansion in ZrW2O8-containing composites: effect of heat treatment 13:30-14:00 Qiang Zhang 65 School of Materials Science and Engineering, Harbin Institute of Technology, China Enhance mechanical properties of sintered iron via surface grain size gradient 14:00-14:18 49 Yifei Chen, Guodong Cui - 5 - School of Materials Science and Engineering, Southwest Jiaotong University, China Characteristic of retained austenite decomposition during tempering and its effect on impact toughness in 2.25Cr-1Mo-0.25V steel 14:18-14:36 58 Zhonghua Jiang, Pei Wang, Xiangjun Chen, Dianzhong Li, Yiyi Li Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, China Study on transformation plasticity behavior of steels during austenite transformation 14:36-14:54 Shan Miao, Dong-ying Ju, Meng-yuan Yan, Hui-jun Zhao 66 Saitama Institute of Technology, Japan Study on Inverse Analysis of Heat Transfer Coefficient of Flat Disk in Quenching Process Considering First Step of Boiling of Coolant 14:54-15:12 _ Hideo Kanamori, Dong-ying Ju, Tsuyoshi Sugimoto Saitama Institute of Technology, Japan 15:12-15:25 Tea Break Identification of heat transfer rate by disk probe and validation of quenching simulation 15:25-15:43 Hideo Kanamori, Dong-ying Ju 67 Saitama Institute of Technology, Japan Issue in heat treatment of CSEF steels 15:43-16:01 Jeff Henry 68 ATC-Engineering Services, USA Annealing of AISI 301 stainless steel before low temperature carburizing 16:01-16:19 Karl Andreas, Alexandra Friedrich 60 Bodycote, Germany Accelerating bainitic transformation by optimizing heat treatment 16:19-16:37 S.L.Xia,X.Y. Long, F.C. Zhang 62 State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, China A hybrid thermal processing & coating method for enhancing the tribological properties of treated components 16:37-16:55 Johan Blomkvist, Fredrik Lindberg, Boris Zhmud 69 Applied Nano Surfaces, Sweden A new method of plasma strengthening in gun bore 16:55-17:13 Tianfang Luo 68 Army Artillery Air Defense Academy, China Study on aging heat treatment and stability control of aluminum alloy engine block 17:13-17:31 Ye Yan, Dong-ying Ju, Yuan-qiang Tang, Dao-qing Zang 70 Saitama Institute of Technology, Japan Hot deformation induced evolution of the precipitations in an Al-Li alloy 17:31-17:49 Xiao-Ya Wang, Jian-Tang Jiang, Guo-Ai Li, Liang Zhen 71 School of Materials Science and Engineering, Harbin Institute of Technology, China Quench sensitivity of Al-7Si-0.2Mg high pressure vacuum die cast alloy 17:49-18:07 Mengyun Liu, Zhan Zhang, X. Grant Chen 70 University of Quebec at Chicoutimi, Canada

- 6 - 13 September 2018 • Chemical-thermo Treatment Room: 206

Chair:Prof. M.F. Yan Session Chair: Prof. M.F. Yan，Prof. Marcel Somers，Prof. R.L. Liu Time Title Page 08:00-08:05 Opening Speech Low temperature surface hardening; from fundamental understanding to predicting composition and stress profiles 08:05-08:30 Marcel Somers 100 Technical University of Denmark The effect of oxy-nitriding on the corrosion resistance in H2S environment 08:30-08:55 Jun Wang, Longyi Li, Hanshan Dong 92

Surface properties of diamond-like carbon in-situ growth on Fe3C-containing carburized layer by plasma carburizing 08:55-09:20 Yang Yang, Mufu Yan 101 Harbin Institute of Technology Three-dimensional Reconstruction of Composite Microstructures 09:20-09:35 Yanxiang Zhang 100 Harbin Institute of Technology Research of controlling large-size and thin-wall carburizing and quenching gear distortion 09:35-09:50 Zhonghe Zhang 93 Shenyang Heat Treatment Society 09:50-10:00 Tea Break Mechanical properties and microstructure evolution of borided hot-work tool steel 10:00-10:15 Undrakh Mishigdorzhiyn, Nikolay Ulakhanov 101 ESSTUM Effect of the deformation on carbonnitriding microstructure of the cold deformed Ti-6Al-4V alloy 10:15-10:30 Huanzheng Sun, Guojun Dong,Yang Song, ,Yudong Fu 94 Harbin Engineering University Rare earth doping and alloying mechanism during plasma nitrocarburizing of low-alloy steel 10:30-10:45 Yixue Wang, Mufu Yan 102 Harbin Institute of Technology Thermal fatigue evaluation of AISI H13 steels surface modified by gas nitriding with pre- and post-shot peening 10:45-11:00 Bo Wang, Xingfeng Zhao, Ming Qin, Jianfeng Gu 115 Shanghai Jiao Tong University, Technical University of Denmark, Hitachi (China) Research Development Corporation A novel rapid plasma nitriding technology enhanced by pre-oxidation for AISI4140 steel 11:00-11:15 Lei Tang, Xiaobing Zhao, Xiaoming Gu, Jiabao Zhang, Jing Hu _ Changzhou University Atomistic diffusion mechanism of rare earth carburizing / nitriding on iron-based alloy 11:15-11:30 Yuan You, Mufu Yan, Jihong Yan 98 Qiqihar university Effect of alloy cations on corrosion resistance of LDH/MAO coating on magnesium alloy 11:30-11:45 Junfeng Chen, Linchi Zou, Wenxin Lin 103 Effect of zirconium addition on hot corrosion behavior of chromium- aluminium coating on nickel-based superalloy 11:45-12:00 Mohamed Elhelaly, Mohamed El-Zomor, Mohamed Hussien, Ahmed Osman Youssef 103 Tabbin Institute for Metallurgical Studies 12:00-13:00 Lunch Session Chair: Prof.Y.X. Zhang，Prof.Thomas Christiansen Time Title Page ★ Future trends in gaseous surface hardening of titanium and titanium alloys 13:00-13:25 Thomas Christiansen, Morten Jellesen, Marcel Somers 96 Technical University of Denmark ★ Application of isothermal transformation to the formation of a nitrided layer 13:25-13:50 Piotr Nawrocki, Jerzy Szawłowski 104 Institute of Precision Mechanics

- 7 - Effect of oxidation temperature on gas oxygen, nitrogen, carbon composite processing layer corrosion resistance 13:50-14:05 Mian Wu, Lin Pan 104 Wuhan Research Institute of Materials Protection Experimental study and first-principles calculations of carbon “expanded” α phase on stainless steel surface 14:05-14:20 Ruiliang Liu, Chaoyang Wei 105 Harbin Engineering University

Surface catalytic behavior of ABO3 type perovskite compounds during gas nitriding with rare earth addition 14:20-14:35 Xing Chen, Chengsong Zhang, Guodong Cui 106 Southwest Jiao Tong University Troubleshooting heaakin malast-treatment furnace atmospheres -- and new control technologies to avoid problems 14:35-14:50 Akin Malas 105 Linde North America LLC Microstructure and properties of composite surface modified layer fabricated on 6061 aluminium alloy by surface mechanical nano-alloying combined with nitriding treatment 14:50-15:05 106 Jian Sun, LiangYu Mei, Yi Li, Xiaodong Du, Yucheng Wu Hefei University of Technology Prestudy on mechanical property of dual-phase microstructure in X100 pipeline steel 15:05-15:20 Zhang Danli, Qin Yuanbin, Shan Zhiwei 97 Xi'an Jiao Tong University 15:20-15:30 Tea Break Nitrogen expanded austenite with superior load-bearing capacity: microstructure control and formation mechanism 15:30-15:45 Bo Wang, Marcel Somers 95 Technical University of Denmark Microstructure evolution and mechanical properties of nitride/ aluminide coatings prepared by plasma nitrding ti-coated 2024 al alloys 15:45-16:00 Fanyong Zhang, Mufu Yan, Fuxing Yin, Jining He 107 University ofTechnology Faster carburizing speed in nitrogen methanol atmosphere with injection lances 16:00-16:15 Zhijun Jiang, Xuwei Ning, Lei Shi, Xiaojia Ren 107 Airliquide (china) R&D Co., LTD.

Influence of NH3 flux on CrN precipitation during low temperature plasma nitriding of AISI304 austenitic stainless steel 16:15-16:30 Hongtao Chen, et al. 108 Harbin University of Science and Technology The evolution of microstructure forecast and test for carburizing and quenching 17CrNiMo6 steel 16:30-16:45 Dengyu Gai, Yuanzhao Chu, Guang Cai, Yueyi Wang 108 Harbin Engineering University Quantitative analysis of solid solute in Zr-2.5Nb alloy by ATP technique 16:45-17:00 Xue Liang 109 Shanghai University

A study of modifying La0.6Sr0.4Co0.2Fe0.8O3-δ surface by plasma glow discharge 17:00-17:15 Jingbo Ma, et al. 109 Harbin Institute of Technology Effects of depositing atmosphere on microstructure, mechanical and tribological properties of titanium nitride film 17:15-17:30 Shidong Zhang, et al. 99 Harbin Institute of Technology Applications of XD super nitriding activator 17:30-17:45 Hongda Zheng 116 Deyang Xingda Heat Treatment Technical Service Mechanism of surface microstructure nano-crystallization during low temperature plasma nitriding 17:45-18:00 Jiawei Yao, et al. 110 Harbin Institute of Technology Quenching deformation control of thin-wall ZL205A aluminum alloy barrel by in-situ formation of gradient multiphase layer 18:00-18:15 Lu Chen, et al. 111 Harbin Institute of Technology

*Co-organizer: 1. Harbin Association for Science and Technology 2. National Key Laboratory for Precision Hot Processing of Metals

- 8 - 13 September 2018 • Heat Treatment and Surface Engineering for Key Parts and Components Industries

Room: 209 Session Chair: Prof.Genshu Zhou，Dr. Volker Heuer Time Title Page ★ Endothermic Generator Design and Reactions 08:30-09:00 Donald MacKenzie 132 Houghton International Synchronized vacuum heat treatment for fully integrated manufacturing lines and small batch treatment 09:00-09:15 Volker Heuer，Klaus Loeser 122 ALD Vacuum Technologies GmbH Cost- and resource effective surface layer heat treatment in gear and tool industry by PulsPlasma®-Nitriding 09:15-09:30 Dietmar Voigtländer 133 PlaTeG GmbH Microstructure and corrosion resistance of Ni-based alloy coated onto gray cast iron using a multi-step induction cladding process 09:30-09:45 118 Jing Yu Dalian Maritime University Effects of the induction heat treatment on microstructure and properties of hot rolled stainless steel clad plate 09:45-10:00 Xinjin Zhang 120 China First Heavy Industries R & D Center 10:00-10:15 Tea Break Effects of pulse current on tensile deformation behavior of pure titanium 10:15-10:30 Qi Shi 123 Northeastern University Precipitation behaviour of μ phase in new type Co-base superalloys 10:30-10:45 Bo Gao 124 Northeastern University Techniques to improve the performance of Hadfield steel frogs 10:45-11:00 Fucheng Zhang 130 Yanshan University Case hardening by low pressure carburizing in highly efficient emicontinuous vacuum furnaces 11:00-11:15 Maciej Korecki，Jianlin Yang 132 Secowarwick S.A Quenching behaviour of a high wear resistant Cr-rich cast alloy 11:15-11:30 Rikiya Kodama 125 Toyota Technological Institute Fluidised Bed Furnace Technology 11:30-11:45 Andrew Fitchett 134 Applied Heat Technologies PL

Effects of fiber coating on interfacial reaction and mechanical properties of SiCf/Ti composites 11:45-12:00 Xian Luo 126 Northwestern Polytechnical University Session Chair: Prof.Yanqing Yang Time Title Page Applications of laser cladding technology in oil industry 13:30-14:00 Shenghong Zheng 135 Petrochina Changqing Oilfield Company The analysis and optimization of distortion in die quenching process for spiral bevel gear 14:00-14:15 Yingtao Zhang 136 Hohai Uniersity The oxidation behaviour of NiCrAlYSi coatings at 1100 oC by arc ion plating 14:15-14:30 127 Qian Shi

- 9 - Guangdong Institute of New Materials Microstructural evolution and mechanical properties of Ti-6Mo-5V-3Al-2Fe alloy aged at various temperatures 14:30-14:45 Wang Rui 128 Shenyang University of Technology Weight-efficient powertrain components – steel grades, heat treatments and performance 14:45-15:00 Albin Stormvinter 129 Swerea IVF AB Application of DSP Intelligent induction heating power supply in induction heat treatment fields of key parts 15:00-15:15 Xiaoqiang Duan 133 Zhengzhou Kechuang Electronic Co.,Ltd. ECM Technologies, Low Pressure Carburizing distortion data comparing oil and high pressure gas quenching 15:15-15:30 Vincent Lelong 135 ECM-USA, Inc., 15:30-15:45 Tea Break Improving ductility and toughness of martensitic steels through twice partitioning heat-treatments 15:45-16:00 Lijun Wang 136 northeastern university Study on hot-shock-resistance of the composite coating of 20 steel substrate by hot dip aluminum and micro-arc oxidation 16:00-16:15 Xiaofeng Sun 134 Academy of Armored Force Engineering Increase efficiency and productivity using Tubothal elements and Kanthal APM™ radiant tubes 16:15-16:30 Fernando Rave 131 Kanthal AB Intelligent heat treatment plant system practice 16:30-16:45 Zhipeng Zhang 137 Jiangsu Fengdong Thermal Technology Co., Ltd. Pre-vacuum series batch furnace and its intelligent controlling system 16:45-17:00 Boqun Han 137 Jiangsu Fengdong Thermal Technology Co., Ltd Development of furnace temperature uniformity test function based on the heat treatment DCS system 17:00-17:15 Jingmin Li 137 Institute of Mechanical Manufacturing Technology, China Academy of Engineering Physics

- 10 - 13 September 2018 • Quenchant, Quenching and Distortion Control Room: 207

Chair：Dr. George Totten，Prof. Nailu Chen Session Chair: Dr. George Totten，Prof. Yonghua Rong，Prof. Joesph Agboola，Prof. Xinmin Luo Time Title Page ★ Evaluation of Distortion in Vegetable Oil Quenched Medium Carbon Steel 08:00-08:30 Joseph Agboola 162 Department of Mechanical Engineering, Federal University of Technology ★ New Development of Theory and Applications for Alternately Timed Quenching technology 08:30-09:00 NaiLu Chen 160 Shanghai Jiao Tong University ★ Application of integrated computational materials engineering in heat treatment of steel forgings 09:00-09:30 Victor li 166 Kunming University of Science and Technology ★ “Cooling engineering” for steel’s quench-hardening derived from “cooling modeling”: a technology overview 09:30-10:00 Xinmin Luo 163 Jiangsu University 10:00-10:15 Tea Break New era in designing and governing cooling intensity of liquid quenchants to decrease distortion 10:15-10:35 N. I. Kobasko 166 O. IQ Technologies, Inc. Parallelized particle swarm optimization to estimate the heat transfer coefficients of several vegetable oils and compared to conventional and accelerated petroleum oil quenchants 10:35-10:55 167 Zoltán Fried Obuda University Investigation of longitudinal quenching crack by finite element simulation 10:55-11:15 Yu Liu 167 Shanghai Jiao Tong University “Uphill” quenching of aeronautical aluminum alloys: comparative of influence from mechanical properties for AA7075-T6 11:15-11:35 Wellington Mattos 168 Engenharia de Producão Mecanica, Escola de Engenharia de São Carlos, Universidade de São Paulo Cooling curves characterization of less commonly encountered vegetable oils for quenchant applications 11:35-11:55 Rosa Simencio Otero 168 Engenharia de Producão Mecanica, Escola de Engenharia de São Carlos, Universidade de São Paulo 12:00-13:00 Lunch Vegetable oil and petroleum oil cooling curve characterization using MATLAB 13:30-13:50 Lemmy Meekisho 169 Portland State University, Department of Mechanical and Materials Engineering Prediction of thermal boundary conditions by using FWA 13:50-14:10 Zoltan Fried 169 Obuda University Online database for liquid quenchants 14:10-14:30 Imre Felde 170 Obuda University Maintenance of oil quenchants 14:30-14:50 Donald MacKenzie 170 Houghton International Inc. Distortion in hollow cylinder with thin wall during high pressure gas quenching 14:50-15:10 Ning YU 170 Shanghai Jiao Tong University 15:10-15:25 Tea Break Polymer quenchants for induction hardening – alternatives without boron and formaldehyde releasing biocides 15:25-15:45 Eva Troell 164 Swerea IVF AB Experimental method for emulating the cooling conditions of massive components 15:45-16:05 Diego Lozano 165 Universidad de Monterrey

- 11 - Holistic problem of cooling effect of vertically oil quenched shaft-type work-piece 16:05-16:25 Kejian Zhang 171 Beijing Huali Fine Chemical Co., Ltd.

Application value and controllability analysis of supercritical CO2 as a new quenchant 16:25-16:45 Haibin Wang 171 Shanghai Yibai heat treatment equipment co.ltd New method for controlled-cooling of high-carbon chromium bearing steels after forging 16:45-17:05 Yongping Zuo 172 Nanjing KERUN Lubricants Co.,Ltd.,Nanjing Jiangsu Investigation on the application of jinrunbao type ZFQ- BI similar oil aqueous polymer quenchant solutions used on cold working dies made of Cr12 and Cr12MoV Steel 17:05-17:25 _ Fuqun Zhang gold Runbao technology Co.,Ltd. Luoyang 471000,China

13 September 2018 • Modelling and Simulation Room: 307

Chair: Prof. Dongying Ju，Prof. Jianfeng Gu，Prof. Wei Shi Session Chair：Prof. Dongying Ju、Prof. Mengnie Li，Prof. Yiming Rong，Prof. Wei Shi Time Title Page ★ Numerical simulation of heat treatment and its engineering application 13:30-14:00 Jianfeng GU 493 Shanghai Jiao Tong University ★ Heat treatment simulation for low pressure super carburizing proces 14:00-14:30 Tsuyoshi Sugimoto 494 Nissan Motor Co., Ltd. Modelling on quenching precipitation of Al-Cu-Cd alloy 14:30-14:50 Luo Sheng 496 Southern University of Science and Technology Microstructural evolution of a steam turbine rotor subjected to a water quenching process: numerical simulation and experimental verification 14:50-15:10 499 Chuan Wu of Technology and Education 15:10-15:25 Tea Break Microstructure-based mesoscopic modeling of deformation behavior of dual-phase steels using crystal plasticity finite element method 15:25-15:45 501 Jack Shen Shanghai Jiao Tong University Heat transfer coefficient model of large cross section steel bar during water cooling process 15:45-16:05 Zhang Liwen 495 Dalian University of Technology Diffusion simulation in SUS 430 stainless steel interconnect with a MnCu coating at 800 ºC 16:05-16:25 Yuan Kang 497 BGRIMM Technology Group Application of Universal Function Approximator to predict HTC durning quenching 16:25-16:45 Felde Imre 498 Obuda University Influence of circular workpieces arrays on temperature field of vacuum heating process 16:45-17:05 Jing Liu 498 Northeastern University Heat Transfer, Microstructure Evolution and Stress Development in a Quenched 403 Stainless Steel Forging 17:05-17:25 Youxin Zhu 499 Kunming University of Science and Technology, Design method fin-tube heat exchange based on numerical simulation 17:25-17:45 Wenjing Yang 509 Brimet

- 12 - 13 September 2018 • Non-ferrous Metals, Cu, Al, Mg, Ti alloy, and etc Room208

Chair: Prof. Niinomi Mitsuo, Prof. Ping Liu, Prof. Zhou Li Time Title Page ★ Improvement of mechanical biocompatibility of titanium alloys for biomedical applications by deformation-induced phase transformation 08:30-09:00 176 NiinomiMitsuo Tohoku University ★ Evolution of electrical conductivity, hardness and strength during age hardening of AA7010 09:00-09:30 Yuyuan Zhao 189 University of Liverpool Effect of nitrogen content on microtructure and mechanical properties of multi-element (AlCrTiZrV)N films by reactive magnetron sputtering 09:30-09:45 189 Wei Li University of Shanghai for Science and Technology Effect of cryogenic treatment technique on microstructure and mechanical property of spray 7055 alloy 09:45-10:00 Guoxing Pang 190 North china insititute of aerospace engineering 10:00-10:15 Tea Break Study on the effect of cryogenic treatment on the microstructure and hardness of Ti-6Al-4V with the application of synchrotron X-ray diffraction 10:15-10:30 190 Yichen Meng Technical University of Denmark In vitro biocorrosion behavior of as-cast biodegradable Mg-Zn-Zr-Gd alloy 10:30-10:45 Ya Liu 191 Henan University of Science and Technology Effect of high temperature strain rate and subsequent annealing on recrystallization behavior of Ti-55531 alloy 10:45-11:00 Lulu Cai 178 Xi’an University of Technology Quantitative evaluation of porosity in Al-Si-Cu die casting cylinder block 11:00-11:15 Xuan Wang 192 University Effect of Ni content on microstructure and characterization of Cu–Ni–Sn alloys 11:15-11:30 Wang Xiaochao 179 Henan University of Science and Technology The influence of ω phase on super refined α precipitations in Ti-55531 alloy 11:30-11:45 Minjian Zhao 193 Xi’an University of Technology Forming limits of sheet metals of different tempers in incremental forming 11:45-12:00 Hussain Ghulam 194 GIK Institute 12:00-13:00 Lunch Chair: Prof. Niinomi Mitsuo，Prof. Ping Liu，Prof. Zhou Li Time Title Page Designing Mg alloy with high strength and ductility through optimizing microstructure and texture 13:00-13:15 Yuzhou Du 180 Xi'an University of Technology Effect of thermo-mechanical treatments on the microstructure and mechanical properties of in situ TiB reinforced Ti matrix composite 13:15-13:30 192 Fengcang Ma University of Shanghai for science and technology 13:30-13:45 Effects of compositions on localized corrosion in Al-Zn-Mg-X Al alloys 194

- 13 - Yingying Jia Harbin Institute of Technology Effect of Heat Treatment on Microstructure and Mechanical Properties of Al-4.5Cu-1Mg-0.5Mn(-xEr) Alloys 13:45-14:00 Xiaoran Huo 181 Shenyang University of Technology Wear and corrosion behavior of graphene nanoplates reinforced copper matrix composites prepared by electrostatic self-assembly and powder metallurgy 14:00-14:15 191 Ke Zhang University of Shanghai for Science and Technology Influence of Solution and Aging Treatment on Microstructure and Mechanical Properties of Extruded Al-7Zn-2Mg-1.5Cu-0.1Zr(-0.2Sc) Alloy 14:15-14:30 182 Qingyan Zhu Shenyang University of Technology Effect of friction stir processing on microstructure and mechanical properties of Al-Mg-Si alloy 14:30-14:45 Yongqiang Qin 195 Hefei University of Technology 14:45-15:00 Tea Break Influence of natural aging on precipitation hardening behavior of Al-Mg-Si-Cu alloys and their composites 15:00-15:15 Zhu Shize 183 Institute of Metal Research, Chinese Academy of Sciences Aging strengthening mechanism and thermal deformation of Cu-Mg alloyAging strengthening mechanism and thermal deformation of Cu-Mg alloy 15:15-15:30 184 Bingjie Wang Henan University of Science and Technology Effect of Heat Treatment on Microstructure and Properties of Ti-6Al-4V-0.5Si alloy 15:30-15:45 Leiming Guo 193 Henan University of Science and Technology Characterization and corrosion behavior of a laser surface quenched Nickel-Aluminum bronze 15:45-16:00 Zhenbo Qin 185 Shanghai Jiao Tong University

Preparation of ZrB2 particle reinforced Cu matrix composites from both ex-situ and in-situ routes 16:00-16:15 Zhiguo Zhang 186 The corrosion behavior of Mg-2Nd-0.5Zn-0.4Zr-1Y alloy 16:15-16:30 Dazhao Xu 187 Henan University of Science and Technology Surface modification of the NAB alloy to improve the corrosion resistance and cavitation erosion resistance via thermal diffusion process 16:30-16:45 195 Zhong Wu Tianjin University

Strengthening effect of extruded Mg-8Sn-2Zn-2Al alloy: influence of micro and nano-size Mg2Sn precipitates 16:45-17:00 Weili Cheng 188 Taiyuan University of Technology

- 14 - 13 September 2018 • Heat Treatment and Surface Engineering of Energy Materials & Equipment

Room 210 Chair:Prof. Yu-Cheng Wu, Prof.JinPing Suo Session Chair:Prof.Yucheng Wu, Prof.Jinping Suo Time Title Page ★ Effect of boron addition on the corrosion resistance of S31254 super austenitic stainless steel after solution treatment 08:30-09:00 1Jian Wang, 1Haojie Meng, 1Yishi Cui, 1Nan Dong, 2Xudong Fang, 1Peide Han 218 1Taiyuan University of technology, 2Shanxi Taiyuan Stainless Steel Co. , Ltd.

★ Fabrication of Al2O3 tritium permeation barrier gradient coating via pack cementation combined with anodic oxidation 09:00-09:30 Xiaoyue Tan, Yu–Cheng Wu 228 Hefei University of Technology ★ Chromizing in power industry 09:30-10:00 Jeff Henry 228 ATC-Engineering Services 10:00-10:15 Tea Break

★ Swelling behavior and void hardening mechanism of ion-irradiated vanadium alloys 10:15-10:45 Ken-ichi Fukumoto - University of Fukui ★ Effects of helium irradiation on surface modification of tungsten due to tensile stress 10:45-11:15 Kazutoshi Tokunaga - Kyushu University Effect of heat treatment on creep property of SCRAM steel 11:15-11:30 Juexin Xu, Hui Lu, Chi Yu, Yan Wang, Chunlan Luo, Gaoyong Xu, Jinping Suo 217 Huazhong University of Science & Technology Hardness and microstructural evolution of pure tungsten with three different deformation ratio during static recrystallization 11:30-11:45 Kang Wang, Mu Gu, Xiang Zan, Laima Luo, Jiaqin Liu, Jigui Cheng, Yucheng Wu 227 Hefei University of Technology High temperature oxidation performance of thick Cr coating using large arc deposition system for accident tolerant fuel claddings 11:45-12:00 229 Xiaogang Hu, Aimin Wu, Chuang Dong Dalian University of Technology 12:00-13:00 Lunch Session Chair:Prof. Wen-Xian Wang Time Title Page ★ Features of intermetallic compound layers formed by heat treatment of Al coatings on V surfaces 13:30-14:00 1Xiang Gao, 2Guikai Zhang, 1Lizhu Luo, 2Xiaolin Wang 222 1Science and Technology on Surface Physics and Chemistry Laboratory, 2China Academy of Engineering Physics ★ Effect of precipitation hardening on the tensile behavior of a fccbased high-entropy alloy 14:00-14:30 Hanwen Zhang 229 Taiyuan University of Technology ★ Improved corrosion resistance of super 13Cr martensitic stainless steel via passivation technology 1Hui Dong, 1Kan Ren, 2Yan Han, 1Yong Zhou, 1Xiao Li 14:30-15:00 223 1Xi’an Shiyou University, 2CNPC Tubular Goods Research Institute, State Key Laboratory for Performance and Structure Safety of Petroleum Tubular Goods and Equipment Materials Precipitation behavior of super austenitic stainless steel S31254 during isothermal aging 1Yishi Cui, 2Jingang Bai, 1Jian Wang, 1Saqlaina Muhammad Qurashi, 1Peide Han 15:00-15:15 220 1College of Materials Science and Engineering, Taiyuan University of Technology, 2State Key Laboratory of Advanced Stainless Steel Materials High temperature oxidation behavior of molybdenum alloy thinwall tubes coated with FeCrAl 15:15-15:30 Guojun Zhang , Lina Wang 230 Xi'an University of Technology 15:30-15:45 Tea Break

- 15 - Study on microstructures and properties of high thermal conductivity tungsten-based materials prepared by spark plasma sintering 15:45-16:00 230 Liang Zheng, Yu–Cheng Wu Hefei University of Technology Effect of annealing treatment on mechanical property and microstructure of 9Cr-ODS steel 16:00-16:15 Hui Lu, Juexin Xu, Cheng Zhang, Yan Wang, Chunlan Luo, Gaoyong Xu, Jinping Suo 224 Huazhong University of Science and Technology Corrosion inhibition performance of phenylaminomethyl benzotriazole in 5% HCl solution 1Juantao Zhang, 2Xunji Li, 2Wenwen Song, 3Junping Zhang 16:15-16:30 1State Key Laboratory for Performance and Structure Safety of Petroleum Tubular Goods and Equipment Materials, 231 2Petrochina Engineering Institute, Tarim Oilfield Company, Petro China, 3Department of Applied Chemistry, School of Natural and Applied Sciences, Northwestern Polytechnical University Radiation-induced segregation of Al1.5CrFeNi high entropy alloys enhanced by surface sputtering 16:30-16:45 Sen Sun, Yuan Wang 226 Sichuan University

13 September 2018 • High Energy Beam Surface Engineering and Additive Manufacturing Room405

Chairs: Prof. Jianhua Yao, Prof. Lijun Song Time Title Page ★ Laser Hybrid Surface Engineering – A New Way to Future Development 08:00-08:30 Kovalenko Volodymyr (*) 251 National Technical University of Ukraine, Ukraine; of Technology, China ★ Design of titanium alloys for additive manufacturing based on cluster-plus-glue-atom model 08:30-08:55 Xiaohua Min (*) 252 Dalian University of Technology,China Heat treatment of a hot work tool steel produced by selective laser melting 08:55-09:10 Pellizzari Massimo 253 University of Trento, Italy A new technique to fabricate Tin-graphite anode of lithium ion battery using laser sintering: microstructure and electrochemical properties 09:10-09:25 252 Xue Zhang Dalian University of Technology,China Effect of scanning path and overlapping rate on residual stress of 316 stainless steel blade by finite element simulation of laser shock peening 09:25-09:40 241 Cang Xu Jiangsu University, China Effects of service temperature on tensile properties and microstructural evolution of commercially pure titanium subjected to laser shock peening 09:40-09:55 254 Haifei Lu Jiangsu University, China Effect of SHS and SLIPS on corrosion resistance of 2219 aluminum alloy by femtosecond laser texturing 09:55-10:10 Zexu Zhao 242 University, China 10:10-10:25 Tea Break ★ Microstructural control of Inconel 718 using quasi-continuous-wave laser additive manufacturing 10:25-10:50 Lijun Song (*) 255 , China ★ Laser surface modification for the industrial and national defense applications 10:50-11:15 Shi Yan (*) 254 Changchun University of Science and Technology, China Influence of processing speed on the properties of high speed steel laser cladded deposits 11:15-11:30 Ur Rahman Naveed 243 University of Twente, Netherlands The oil-water separation research in stainless steel mesh using Femtosecond laser processing printer powder coated mesh 11:30-11:45 244 Wei Wang

- 16 - Hunan University, China

Influence of Y2O3 on microstructure and cracking susceptibility of Ni-based coating fabricated by laser cladding with different fluxes of shielding and powdered gas 11:45-12:00 255 Yunfeng Li Changchun University of Science and Technology, China The influence of TiC on the microstructure and mechanical properties of carbide laser cladding 12:00-12:15 Xiangwen Chen 256 Fujian Agriculture and Forestry University Effects of different feeding powders on microstructure and mechanical properties of 316L stainless steel repaired by laser metal deposition 12:15-12:30 Xuting Shen 245 , China 12:30-13:30 Lunch Chairs: Prof. Chuang Dong, Prof. Yan Shi ★ Towards hard yet tough ceramic coatings 13:30-13:55 Sam Zhang (*) 251 , China ★ Supplier process control of laser metal deposition with coaxial nozzle 13:55-14:20 Liqun Li (*) 256 Harbin Institute of Technology, China Parametric investigation on supersonic laser deposition with powder mixture of Stellite-6 and tungsten carbide 14:20-14:35 Bo Li 246 Zhejiang University of Technology, China Fabrication and characterization of high strength Al-Cu-Mg alloy using directed energy deposition 14:35-14:50 Tao Gu 257 Harbin Institute of Technology, Weihai, China δ-phase precipitation in INCONEL 718 superalloy fabricated by electromagnetic stirring assisted laser solid forming 14:50-15:05 Feiyue Lyu 247 Nanchang Hangkong University, China Numerical and experimental investigation on laser metal deposition as repair technology for 316L stainless steel 15:05-15:20 MingJie Zhan 248 Southeast University, China Research progresses on the measurement and control of laser cladding forming process 15:20-15:35 Liya Qiao 249 Beijing Information Science and Technology University, China 15:35-15:50 Tea Break ★ The shaping and performance for wire arc additive manufacturing of advanced materials Xizhang Chen (*) 253 15:50-16:15 Wenzhou University, China ★ Additive remanufacturing technology of light alloy 16:15-16:40 Xiaoming Wang - National Key Laboratory for Remanufacturing, Army Academy of Armored Forces The formation mechanism of femtosecond laser induced micro/nano structure on 443 stainless steel surface under different environmental media 16:40-16:55 - Zeqin Cui Taiyuan University of Technology, China Design and Laser Additive Manufacturing of Ni-based Superalloys 16:55-17:10 Qun Yu 258 Dalian University of Technology,China Influence of laser welding temperature field on porosity of galvanized steel 17:10-17:25 Lei Huang 257 Wenzhou University, China Surface textured treatment by plasma jet dispersed hardening: a potential method for improving the service life of the rail steel 17:25-17:40 Deping Yu 250 Sichuan University, China Evaluation of interface defect in plasma transferred arc cladding process using spontaneous magnetic signals 17:40-17:55 Zhengchun Qian 259 Hefei University of Technology, China

- 17 - 13 September 2018 • New Technologies for Hard and Superhard Thin Films Room 307

Chairs: Prof. Chenming Li , Prof. Haitao Ye, Prof.Tomasz Ochalski Session Chair: Prof. Haitao Ye, Prof. Zhang Shihong Time Title Page  Surface functionalized diamond for advanced engineering application 08:00-08:20 Haitao Ye 301 University of Leicester  Influence of nitrogen implantation on optical properties of CVD bulk diamond and diamond film 08:30-08:50 Tomasz Ochalski 292 Cork Institute of Technology  The novel coating technology in steel remanufacturing industry and construction of international standards Shihong Zhang 08:50-09:10 157 1 Research Center of Modern Surface & Interface Engineering, of Technology, Maanshan 243002, PR China 2 School of Materials Science and Engineering, Anhui University of Technology, Maanshan 243002, PR China Effect of graphene oxide addictive on tribocorrosion behavior of MAO coatings prepared on Ti6Al4V alloy You Zuo1, 2,Tianlu Li 1, Peihang Yu 1,2, FeiChen1 09:10-09:25 293 1Department of Materials Science and Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China. 2Department of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China. Study on energy resolution of α-particle detectors based on high-quality single crystal diamond 09:25-09:40 Yanzhao Guo, Jinlong Liu, Yun Zhao, Yuting Zheng, Liangxian Chen, Junjun Wei, Chengming Li - Institute for Advanced Materials and Technology, University of Science and Technology Beijing Effect of micro-arc oxidation electrolyte and voltage on growth of LDHs film Peihang Yu1, 2, Fei Chen 1, *, You Zuo 1, 2, Tianlu Li 1, You Zhang 1 09:40-09:55 294 1College of Materials Science and Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China. 2 College of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, China. Superhard nanocomposite films deposited by filtered cathodic vacuum arc Xu Zhang*, Bin Liao, Han,Zhou, Minju Ying,Yongqing Shen,Xiangying Wu 09:55-10:10 294 Key Laboratory of Beam Technology of Ministry of Education, College of Nuclear Science and Technology , Beijing Normal University, Beijing 100875,China 10:10-10:20 Tea Break Session Chair: Prof. Tomasz Ochalski, Prof. Fei Chen Ultra-smooth and hydrophobic ultra-nano-crystalline diamond film growth in C-H-O-N gas phase system via microwave plasma CVD 10:20-10:35 1Yuting Zheng, 1Jinlong Liu, 1Zhina Qi, 2Haitao Ye, 3Fangsen Li, 3Hui Hao, 1Chengming Li 295 1 Institute for Advanced Materials and Technology, University of Science and Technology Beijing, 2School of Engineering and Applied Science, Aston University, 3Suzhou Institute of Nano-Tech and Nano-Bionics(SINANO), Chinese Academy of Sciences Plasma surface niobium alloying on pure titanium surface 10:35-10:50 Wenbo Wang 283 School of mechanics, Taiyuan University of Technology Structure and tribocorrosion properties of coupled coatings of TiSiCN/nitride on Ti6Al4V alloy 10:50-11:05 Minpeng Dong, Jinlong Li, Yebiao Zhu, Chunting Wang, Fuliang Ma, Liping Wang 295 Ningbo Institute of Material Technology and Engineering Simulation of residual stress of different TiN coating systems on be substrate 11:05-11:20 Lihuan Wang, Liangxiang Chen, Jinlong Liu, Junjun Wei, Chengming Li 284 University of Science and Technology Beijing, China Excellent adhered thick Diamond-like carbon coatings by optimizing hetero-interfaces with sequential highly energetic Cr and C ion treatment 11:20-11:35 296 Liangliang Liu, Zhongzhen Wu, Xiaokai An, Wei Tang Shenzhen Graduate School The behavior of Ag in TiSiN coating and the properties of the composite coating 11:35-11:50 Yebiao Zhu, Minpeng Dong, Jinlong Li, Keke Chang, Liping Wang 297 Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences

- 18 - 13 September 2018 • High-power Impulse Magnetron Sputtering (HiPIMS) Room 309

Chairs：Prof. Yuan Xia, Prof. Liuhe Li, Prof. Mike Hopkins Time Title Page  High power impulse magnetron sputtering based on novel waveform configuration 08:15-08:35 Xiubo Tian 305 Harbin Institute of Technology, China  Plasma diagnostics in HiPIMS 08:35-08:55 Mike Hopkins 303 Impedans Ltd., Ireland Discharge characteristics of superimposed HiPIMS-MF and properties of as-prepared Nitride nanocomposite coatings 08:55-09:10 Deen Sun 305 , China Gas breakdown and discharge formation in high power impulse magnetron sputtering 09:10-09:25 Peiling Ke 306 Ningbo Institute of Materials Technology and Engineering, CAS, China

Hipims industrialization under high ionization applications 09:25-09:40 Jialei Chen 307 TRUMPF Huttinger, Germany Mass spectrometry diagnostics of the ion energy and ion flux during bipolar pulsed high power impulse magnetron sputtering of titanium nitride 09:40-09:55 306 Jiabin Gu Linköping university, Sweden Beihang University, China Discharge and deposition of HiPIMS based on cylindrical-shape cathode 09:55-10:10 Zhongzhen Wu 308 Peking University Shenzhen Graduate School, China 10:10-10:20 Tea Break  Semi-condutivity ZnO film prepared by HiPIMS 10:20-10:40 Qiang Chen 308 Beijing Institute of Graphic Communication, China  Industrial use of HiPIMS with voltage reversal: high deposition rate of metal nitrides 10:40-11:00 309 Ivan Fernandez-Martinez Nano4Energy SL, Spain The construction of aminated diamond-like carbon coating onto polyetheretherketone with better osseointegration 11:00-11:15 Huaiyu Wang 310 Shenzhen Institutes of Advanced Technology, CAS, China Effects of HiPIMS pulse-length on plasma discharge and on the properties of WC- DLC coatings 11:15-11:30 Lei Wang 304 Beihang University, China Study on the thermal stability of the Zr-B- O-N coatings fabricated by hybrid coating system 11:30-11:45 Tiegang Wang 307 Tianjin University of Technology and Education, China Composition depended ion extraction characteristics of cylindrical-shape cathode assisted by the electromagnetic attractor 11:45-12:00 Suihan Cui 309 Peking University Shenzhen Graduate School, China 12:30-13:30 Lunch

- 19 - 13 September 2018 • Plasma Electrolysis and Dishcarge Deposition (Technology) Room 311

Chair: Prof. Wenbin Xue, Prof. Yuan Xia, Prof. Aleksey Yerokhin Session Chair： Prof. Wenbin Xue Time Title Page 08:15-08:20 Opening speech  Anodic plasma electrolytic saturation of steels with nitrogen, carbon and boron 08:20-08:45 Pavel Belkin 321 Kostroma State University, Russia  Biomedical and heat dissipating applications of Mg alloys coated by microarc oxidation 08:45-09:10 Yaming Wang, Yongchun Zou, Yunfeng Wu, Guoliang Chen, Dechang Jia, Yu Zhou 343 Harbin Institute of Technology  What can we learn from plasma diagnostics of the PEO processing of light metallic alloys? 09:10-09:35 Gerard Henrion, Julien Martin, Vitalis Ntomprougkidis, Cedric Noel, Alexandre Nominé, Thierry Belmonte 344 Institut Jean Lamour-CNRS-Université de Lorraine 09:35-09:55 Tea Break Session Chair: Prof. Pavel Belkin, Prof. Yingliang Cheng Metal oxide nanostructured catalysts fabricated by PEO method for efficient CO oxidation 09:55-10:10 Baodan Liu 345 Institute of Metal Research, CAS, China Optical emission spectroscopy as a comprehensive tool for the characterization of micro-arcs during cathodic plasma electrolysis of metals and alloys 10:10-10:25 320 Jovovic Jovica University of Belgrade, Serbia Growth mechanism and tribological behaviors of plasma electrolytic carbonitriding layer on pure iron 10:25-10:40 Xiaoyue Jin1, Yifan Zhang2, Lin Chen2, Jiahao Yu2, Wenbin Xue2, Hongzhong Shang1 345 1. Beijing Radiation Center; 2. Beijing Normal University Non-electrode plasma electrolysis: principle and application 10:40-10:55 Aiming Bu, Yuping Zhang, Yongfu Zhang, Yang Meng, Weiwei Chen, Huanwu Cheng, Lu Wang 344 Beijing Institute of Technology Influence of duty cycle and frequency of the polarizing signal on thickness and protective properties of PEO-coatings on aluminum alloy 10:55-11:10 Gnedenkov S. V.1, Sinebryukhov S. L.1, Egorkin V. S.1,2, Vyaliy I. E.1 318 1. Institute of Chemistry of FEB RAS. 159, pr-t Stoletiya Vladivostoka, Vladivostok 690022 Russia; 2. Far Eastern Federal University (FEFU), 8, Sukhanova St., Vladivostok 690090, Russia Improved corrosion resistance of zinc phosphate-incorporated alumina coating prepared by one-step plasma electrolytic oxidation 11:10-11:25 322 Hao Wu Peking University Shenzhen Graduate School, China The effect of rapidly increasing negative voltage on the high frequency plasma electrolytic oxidation coatings of ADC12 alloy 11:25-11:40 Gang Yang - Institute of Mechanics, CAS, China The way to save energy and reduce consumption of micro-arc oxidation 11:40-11:55 Bailing Jiang, Yanfeng Ge, Dongjie Liu 346 Xi’an University of Technology, China 12:00-13:00 Lunch Session Chair: Prof. Aleksey Yerokhin  Mechanism of anodic film formation on Mg Alloys in aqueous solution 13:30-13:55 Sungmo Moon, Yeajin Kim 348 Korea Institute of Materials Science, South Korea  Degradation mechanisms of micro-arc oxidation composite coatings on biomedical Mg-(Li)-Ca alloys for orthopaedic implants Rongchang Zeng1, Cui Lanyue1, Jiang Ke1, Ding Ziyou1, Liu Rui2, Zhao Bao-Dong2, Zheng Yufeng3 13:55-14:20 370 1. College of Material Science and Engineering, University of Science and Technology;2. Affiliated Hospital of Qingdao University, Qingdao University;3 State Key Laboratory for Turbulence and Complex Systems and Department of Materials Science and Engineering, College of Engineering, Peking University  Non-oxidizing trend in plasma electrolytic technologies: mechanism, diagnostics and applications of electrolytic plasma polishing 14:20-14:45 323 Evgeny Parfenov1, Veta Mukaeva1, Ruzil Farrakhov1, Aleksey Yerokhin2 1. Ufa State Aviation Technical University; 2. University of Manchester - 20 - 14:45-15:10 Tea Break Room Session Chair: Prof. Gerard Henrion, Prof. Rongchang Zeng, Prof. Rongfa Zhang 311 Enhanced Corrosion Resistance and Optical Emission Spectroscopy of Cathodic Plasma Electrolytic Oxidation Film on Q235 Low Carbon Steel 15:10-15:25 Jiahao Yu1, Yifan Zhang1, Xiaoyue Jin2, Lin Chen1, Wenbin Xue1 349 1. College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875, China; 2. Beijing Radiation Center, Beijing 100875, China Tribological Properties of MAO Coating on Zirlo Alloy Formed in Phosphate Electrolyte Kejian Wei1, Lin Chen1, Yao Qu1, Xiaoyue Jin2, Wenbin Xue1, Jinlong Zhang3 15:25-15:40 350 1. College of Nuclear Science and Technology, Beijing Normal University; 2. Beijing Radiation Center; 3. Institute of Materials, Shanghai University Preparation of plasma electrolytic oxidation coating on Mg-Li alloy and its thermal control performance 15:40-15:55 Qixing Xia1, Zhaohua Jiang1, Dongqi Li1, Jiangkang Wang2, Zhongping Yao1 324 1. Harbin Institute of Technology; 2. Normal University Evolution of carbon diffusion layer during cathodic plasma electrolysis on steel Jie Wu1,2, Dejun Li1,2, Lei Dong1,2, Jianhua Deng1,2, Guozheng Li1,2, Wenbin Xue2 1. College of Physics and Materials Science, Tianjin Normal University, Tianjin, 300387, China; 15:55-16:10 326 2. Tianjin International Joint Research Centre of Surface Technology for Energy Storage Materials, Tianjin Normal University, Tianjin 300387, China; 3. College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875, China Influences of processing factors on corrosion resistance and calcium content of anodic coatings developed on AZ31B magnesium alloys 16:10-16:25 329 Yuanyuan Zhu, Rongfa Zhang, Xiaoting Shi, Shufang Zhang, Xiaoxue Huan School of Materials and Electromechanics, Science and Technology Normal University Increasing corrosion properties of steels by plasma electrolyte treatment 16:25-16:40 Ilya Dyakov 328 Kostroma State University, Russia Corrosion behaviour and biological activity of pure magnesium with puerarin coatings 16:40-16:55 Shuhao Peng, Muqin Li, Qinwen Tian, Jingyan Wang 348 Jiamusi University, China Preparation and corrosion resistance of Ti-containing composite coatings on biomedical magnesium alloys Yinying Sheng1, Zhiguo Zhang1, Dahai Zeng1, Wei Li2 16:55-17:10 351 1. Institute of Advanced Wear & Corrosion Resistance and Functional Materials, Jinan University; 2. National Joint Engineering Center of High-performance Wear-resistant Metallic Materials, Guangzhou Can free state W exist in plasma electrolytic oxidation (PEO) coatings? 17:10-17:25 Zhunda Zhu, Wenbin Tu, Yulin Cheng, Yingliang Cheng 332 College of Materials Science and Engineering, Hunan University, Changsha 410082, China Room Session Chair: Prof. Evgeny Parfenov, Prof. Bailing Jiang, Prof. Jun Liang 309

Mechanism of Al2O3 particles in improvement of plasma electrolytic oxidation coating on AM60B alloy Kejian Wei1, Lin Chen1, Yao Qu1, Xiaoyue Jin2, Wenbin Xue1, Jinlong Zhang3 15:10-15:25 350 1. College of Nuclear Science and Technology, Beijing Normal University; 2. Beijing Radiation Center; 3. Institute of Materials, Shanghai University Effect of NaOH concentration on formation behavior of plasma electrolytic oxidation films on Al1050 alloy 15:25-15:40 Juseok Kim1, Sungmo Moon1, Heon-Cheol Shin2 349 1. Korea Institute of Materials Science; 2. Pusan Entrance formation of calcium and magnesium elements into micro-arc oxidation coatings developed on Ti6Al4V alloys 15:40-15:55 Guoqiang Li, Rongfa Zhang, Xiaoting Shi, Shufang Zhang, Honghua Zhang,Yang Sheng, Siyue Cao, Youjun Zhao 333 School of Materials and Electromechanics, Jiangxi Science and Technology Normal University Fabrication and bio-corrosion resistance of MAO/CaO-HA-GO composite coatings on TC4 alloy through micro-arc oxidation and sol-gel methods 15:55-16:10 You Zuo1, Fei Chen2, You Zhang2, Tianlu Li2 352 1.Beijing Institute of Petrochemical Technology, Beijing University of Chemical Technology; 2. Beijing Institute of Petrochemical Technology

Effect of surfactants on morphology and wear resistance of TiO2/hBN composite ceramic coatings formed by microarc oxidation on Ti6Al4V alloy 16:10-16:25 330 Ni Ao, Daoxin Liu, Xiaohua Zhang College of Aeronautics, Institute of Corrosion and Protection, Northwestern Polytechnical University 16:25-16:40 The ‘local over-growth’ characteristic of MAO coating extending into substrate and its response to in-situ tensile behaviors 353

- 21 - Yongchun Zou, Yaming Wang, Daqing Wei, Dechang Jia, Yu Zhou Harbin Institute of Technology, China A kinetic model of plasma electrolytic oxidation for Mg-1Ca alloy 16:40-16:55 Denis Lazarev1, Olga Kulyasova1, Evgeny Parfenov1, Aleksey Yerokhin2 334 1. Ufa State Aviation Technical University; 2. University of Manchester The effect of NaOH on the plasma electrolytic oxidation of A356 aluminium alloy in a concentrated aluminate electrolyte 16:55-17:10 Yulin Cheng, Huanjun Xie, Jinhui Cao, Yingliang Cheng 335 Hunan University, China Effect of phosphate-based sealing treatment on PEO coated AZ91 Mg alloy Yinying Sheng1, Zhiguo Zhang1, Dahai Zeng1, Wei Li2 17:10-17:25 351 1. Institute of Advanced Wear & Corrosion Resistance and Functional Materials, Jinan University; 2. National Joint Engineering Center of High-performance Wear-resistant Metallic Materials, Guangzhou Synergic effects of antioxidation ability and amorphous phase on the surface structure and corrosion resistance of the modified microarc oxidation coating on titanium surface 17:25-17:40 354 Qing Du, Daqing Wei, Yu Zhou, Dechang Jia Harbin Institute of Technology, China

14 September 2018 • Plasma Electrolysis and Dishcarge Deposition (Technology) Room 311

Session Chair: Prof. Yuan Xia Time Title Page  The influences of anion deposition on plasma electrolytic oxidation of valve metals 08:30-08:55 Yingliang Cheng 352 Hunan University, China  Fabrication of hard plasma electrolytic oxidation coatings on Ti alloys for tribological applications 08:55-09:20 Jun Liang 354 Lanzhou Institute of Chemical Physics, CAS, China The role of cathodic current in plasma electrolytic oxidation of aluminium: Kinetic aspects 09:20-09:35 Aleksey Rogov 336 University of Manchester, United Kingdom Effects of Second Phases on Microarc Oxidation Process of Magnesium Base Materials 09:35-09:50 Yanqiu Wang 337 Harbin Engineering University, China 09:50-10:05 Tea Break Session Chair: Sungmo Moon, Yaming Wang Properties of boride layer on plasma electrolytic boro carbonitriding of Q235 low-carbon steel 10:05-10:20 Bin Wang 353 Agricultural University, China A new understanding of plasma electrolytic oxidation from the treatment of a non-valve metal (carbon steel) 10:20-10:35 Zhi Li 338 Hunan University, China High-temperature tribological properties of microarc oxidation coatings on 7075 aluminum alloy 10:35-10:50 Lin Chen 347 Beijing Normal University, China PEO-coatings for biodegradable nanostructured Mg-2Sr implants 10:50-11:05 Veta Mukaeva 339 Ufa State Aviation Technical University, Russia A significant improvement of the wear resistance of Ti6Al4V alloy by a combined method of magnetron sputtering and plasma electrolytic oxidation (PEO) 11:20-11:35 340 Shihang Kang Hunan University, China A novel energy management method for micro-arc oxidation 11:05-11:20 Guitao Chen 375 Xi’an University of Technology, China Influences of processing factors on the corrosion resistance and calcium content of micro-arc oxidation coatings on AZ31B magnesium alloys in a neutral solution 11:35-11:50 342 Xiaoting Shi Jiangxi Science and Technology Normal University, China In-situ fabrication of nano-sized ceria via plasma electrolytic oxidation method in silicate electrolyte on GR1 Ti 11:50-12:05 Xiaoyuan Liu 355 Institute of Metal Research, China - 22 - 13 September 2018 • Functional Surfaces and Coatings Room 308

Chair：Prof. Jia-Hu Ouyang，Prof. Bailing Jiang，Prof. Chengyan Xu Session Chair：Prof. Jia-Hu Ouyang, Prof. Jing-Yang Wang Time Title Page

 Chemical vapor deposition growth of large-area ReS2 monolayer films for optoelectronic applications 08:00-08:30 Chengyan Xu 393 Harbin Institute of Technology, China  Functional coatings on polymer materials 08:30-09:00 Xueqing Cao - of Technology, China  Surface modification of biomedical titanium using plasma immersion ion implantation 09:00-09:30 Xuanyong Liu 392 Shanghai Institute of Ceramics, Chinese Academy of Sciences, China  High energy ion beam surface modification of alloys and ceramics using accelerator Tao Wei 09:30-10:00 386 Australian Nuclear Science and Technology Organisation (ANSTO), Australia 10:00-10:15 Tea Break Session Chair：Prof. Yutao Pei, Prof. Zhilin Li

Microstructural characterization of nanostructured Al2O3-ZrO2 eutectic layer by laser rapid solidification method 10:15-10:30 Zhi-Gang Wang, Jia-Hu Ouyang, Yong-Hui Ma, Ling-Yun Xie, Yu-Jin Wang, Zhan-Guo Liu, Yang Wang 394 School of Mater. Sci. Eng., Harbin Institute of Technology, China Effect of heat treatment on bonding strength of nanostructured 8YSZ thermal barrier coatings deposited onto NiCrAlY(Ce) bond coat 10:30-10:45 391 Z.G. Zhang, F.F. Zhou, J.F. Gou, Q.W. Zhang, S.Y. Liu, L. Wang, Y. Wang, R.Q. Chu School of Mater. Sci. Eng., Harbin Institute of Technology, China Elevating the photo-generated cathodic protection of corrosion product layers on electrogalvanized steel through nano-electrodeposition 10:45-11:00 - Qingyang Li, Maozhong An Institute of Advanced Wear & Corrosion Resistant and Functional Materials, Jinan University, China Fabrication and characteration of layered double hydroxide films by conversion of MAO coatings on magnesium alloys 11:00-11:15 Liang Wu, Zeyu Zhang, Yuxin Zhang, Aitao Tanga, Lingjie Li, Gen Zhang, Zhicheng Zheng, Andrej Atrens, Fusheng Pan 396 College of Mater. Sci. Eng., Chongqing University, China Stable electrochromic polyamide films containing flexible chains in backbone: preparation, electrochemical, fluorescence and memory properties 11:15-11:30 442 Rong-Rong Zheng, Xu Zhang, Zhi-peng Zhang, Hai-jun Niu, Cheng Wang, Wen Wang School of Chemistry, Chemical Engineering and Materials, University, China Effect of sputtering power on microstructure and photoelectrical properties of al-doped ZnO films deposited by RF magnetron sputtering 11:30-11:45 396 Xiying Zhou, XiaoXiao Qiu Shanghai University of Engineering Science, China High-rate deposition of structure controllable Al/Cu films by high power density magnetron sputtering 11:45-12:00 Tielei Shao, Zhongzhen Wu, Suihan Cui, Liangliang Liu, Xiaokai An, Xiao 397 School of Advanced Materials, Peking University Shenzhen Graduate School, China Session Chair：Prof. Xueqiang Cao, Prof. Tao Wei Time Title Page  Material-genome perspective towards robust T/EBC materials 13:00-13:30 Jing-Yang Wang 394 Institute of Metal Research, Chinese Academy of Sciences, China  Enhancing magnetron sputtered protective coatings via hierarchical structuring 13:30-14:00 393 Feng Huang - 23 - Ningbo Institute of Materials Technology and Engineering,Chinese Academy of Science, China  Surface and interface engineering of hybrid perovskite films for perovskite solar cells with highly improved efficiency and stability 14:00-14:30 398 Hongqiang Wang Northwestern Polytechnical University, China Prediction of the critical rupture and failure modes of the plasma sprayed yttria stabilized zirconia thermal barrier coatings under the burner rig test via acoustic emission technique 14:30-14:45 399 Liang Wang, Jinxing Ni, Xinghua Zhong, Fang Shao, Jiasheng Yang, Huayu Zhao, Shunyan Tao, You Wang Shanghai Institute of Ceramics, Chinese Academy of Sciences, China

La2O3-ZrO2-CeO2 thermal barrier coatings by EB-PVD: feathery nanostructure, thermal conductivity and thermal cycling life 14:45-15:00 Zaoyu Shen, Limin He, Zhenhua Xu, Rende Mu 395 Beijing Institute of Aeronautical Materials, China 15:00-15:15 Tea Break Session Chair：Prof. Xuanyong Liu, Prof. Yongsheng Zhang Nano-structured silica as non-chromate anti-corrosion film for metal protecction 15:15-15:30 Shang-Tien Tsai, WenChyuan ChangJean, Pei-Hsiun Chao, Tseng-Chang Tsai 382 Hawing GemS Technology Corporation, National University of Kaohsiung, Taiwan Corrosion and wear properties of biomedical Ti-Zr-based alloys 15:30-15:45 Jiaojiao Zhang, Hefeng Wang, Shangyu Yang, Xuegang Xing, Xuefeng Shu, Xiaomin Jin 380 Taiyuan University of Technology, China Enhancing the tribological and mechanical properties of epoxy coatings by graphene nanoparticle encapsulation 15:45-16:00 Chao Xia, Boris Zhmud 399 Applied Nano Surfaces (ANS), Sweden In-situ grown MgO-ZnO ceramic coating with high thermal emittance on Mg Alloy by plasma electrolytic oxidation 16:00-16:15 Songtao Lu, Yang Li , Wei Qin, Xiaohong Wu 383 Harbin Institute of Technology, China Corrosion resistance of DLC films-coated stainless steel prepared by ion beam enhanced deposition 16:15-16:30 Beibei Han, Huijun Zhao, Dongying Ju, Maorong Chai, Susumu Sato 384 Saitama Institute of Technology, Japan

Effect of micro-textured surface on tribological properties of nanostructured ZrO2(Y2O3)-Al2O3 ceramics under dry sliding

against Al2O3 and 304L steel 16:30-16:45 398 Yufeng Li, Kaiyang Yi, Rao Fu School of Materials Science and Engineering, Shenzhen Graduate School, Harbin Institute of Technology, China

Effect of diffusion characteristics of Pt in β-NiAl/γ’-Ni3Al within NiCoCrAl alloy on alumina growth behaviour 16:45-17:00 Asim Khan, Peng Song, Chao Li, Jiansheng Lu 397 Kunming University of Science and Technology, China Preparation and toughening of a-CuZr/c-ZrN nano-multilayer hard coating 17:00-17:15 Zhenyu Guo, Dayan Ma, Xiaomin Zhang 400 Xi’an Jiaotong University, China The mechanical integrity of a MAO/PLGA composite coated magnesium alloy for biodegradable material 17:15-17:30 Lianxi Chen, Yinying Sheng, Xiaojian Wang, Xueyang Zhao, Hui Liu, Wei Li 400 Jinan University, China Fabrication and characterization of HVOF sprayed NiCoCrAlYCe coatings on K417G Nickle-based superalloy Feifei Zhou, You Wang*, Min Liu**, Chunming Deng, Xiaofeng Zhang, Yaming Wang, Liang Wang 17:30-17:45 *Department of Materials Science, School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, PR 432 China,**National Engineering Laboratory for Modern Materials Surface Engineering Technology, Guangdong Institute of New Materials, Guangzhou 510651, PR China Effects of MTMS water content on morphology and corrosion resistance of non-chromium Zn-Al coatings 17:45-18:00 JiangJiang Huang, Guan Wang 404 Guangdong University of Technology

- 24 - 14 September 2018 • Functional Surfaces and Coatings Room 308

Session Chair：Prof. Hongqiang Wang, Prof. Yufeng Li Time Title Page

 One-step electrodeposition of Cu2ZnSnS4 thin films for solar cells and their properties 08:00-08:30 Zhilin Li 385 Beijing University of Chemical Technology, China  Surface engineering design of self-lubricating ceramics to improve tribological properties Yongsheng Zhang 08:30-09:00 401 Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China Alumina growth behavior on surface-modified NiCoCrAl alloy by Pt and Hf at high temperature 09:00-09:15 Chao Li, Peng Song, Kunlun Chen, Asim Khan, Jiansheng Lu 403 Faculty of Materials Science a nd Engineering, Kunming University of Science and Technology, China Corrosion resistance of HiPIMS-TiN coatings sealed by ALD-Layers with and without N+ pre-ion-implantation Xiaocong Kuang, Liuhe Li 09:15-09:30 - Department of Material Processing and Control Engineering, School of Mechanical Engineering and Automation, Beihang University, Beijing, P. R. China Effect of ladder region on the atom adsorption of Si (111) substrate 09:30-09:45 Wenxin Li, Dongying Ju 402 Department of Electronic Engineering, Graduate School of Engineering, Saitama Institute of Technology, Japan

The change of magnetism triggered by external bias voltage in CoFe2O4/PMN-PT multiferroic heterostructures 09:45-10:00 Aopei Wang, Wen Wang, Ming Feng 388 Harbin Institute of Technology, China 10:00-10:15 Tea Break Session Chair： Prof. Bailing Jiang, Prof. Feng Huang TiAlN/MoN superhard and self-lubrication 10:15-10:30 Zhen Wang, Guojun Zhang 387 School of Materials Science & Engineering, Xi'an University of Technology, China

Study on surface modification of doped MoS2 thin films 10:30-10:45 Huanzheng Sun,Guojun Dong,Yang Song,Yudong Fu - Harbin Engineering University, China Preparation of surface TaC layer reinforced Ta-10W Alloy by in situ solid-phase reaction 10:45-11:00 Haiqiang Bai, Lisheng Zhong, Zhao Shang, Yunhua Xu, Baowei Cao, Ding Yingchun 403 School of Materials Science and Engineering, Xi'an University of Technology, China Microstructure and high temperature oxidation resistance property of packing Al cementation on TA15 alloy 11:00-11:15 Hong Tian, Chunyan Jiang, Yaming Wang, Guoliang Chen, Huai Cai, Xuewei Li 401 Heilongjiang University of Science and Technology, China

Tribological properties of graphene modified n-Al2O3/TiO2 coatings 11:15-11:30 Lan Wang, Saiyue Liu, Junfeng Gou, Qiwen Zhang, Feifei Zhou, You Wang, Ruiqing Chu 392 Harbin Institute of Technology, China Effect of Temperature on hot-dip galvanized Zn-0.05%Al coating with the application of the ammonium-free fluxing process 11:30-11:45 Dedong Wang, Shengmin Wang, Jingang Liu, Xiaojun Zhao, Mingyi He, Guoxiong Huang, Rong Tan 402 Kunming University of Science and Technology, China Microstructure and corrosion behavior of different cladding regions of multi-track laser cladding Ni-based alloy coating 11:45-12:00 Qinying Wang,Shuang Liu 404 School of Materials Science and Engineering, Southwest Petroleum University

- 25 - 13 September 2018 • Thermal Spray Room 303

Chair: Prof. Chang-Jiu Li，Prof. Bolin Zha Session Chair: Prof. Chang-Jiu Li Time Title Page  Structurally integrated damage tolerant coatings 08:00-08:30 Sanjay Sampath 457 Center for Thermal Spray Research, Stony Brook University, USA Cold Spray Session Chair: Prof. Wen-Ya Li ， Prof. Hanlin Liao  Fabrication of Al matrix composites via cold spraying-process, structure and properties Hanlin LIAO*, Xinliang XIE*, Chaoyue CHEN*, Zhanqiu TAN**, Zhiqiang LI**, Gang JI*** 08:30-08:55 *: ICB UMR 6303, CNRS, Univ. Bourgogne Franche-Comté, UTBM, F-90010 Belfort, France 443 **: State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai, 200240, China ***: Unité Matériaux et Transformations, CNRS UMR 8207, Université Lille 1, Villeneuve d'Ascq, 59655, France  Robust corrosion protection of Magnesium alloys via in-situ micro-forging assisted cold spray XiaoTao Luo, YingKang Wei, Yue Zhang, ChangJiu Li 08:25-09:20 444 State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi’an Jiaotong University, China Mechanical properties of in-situ micro-forging assisted cold spray additively manufactured AA6061 alloy Ying-Kang Wei，Yu-Juan Li，Xiao-Tao Luo，Chang-Jiu Li 09:20-09:35 458 State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi’an Jiaotong University, China Evolution of anisotropy of cold-sprayed Cu during post-spray heat treatment Yu-Juan Li, YingKang Wei, Yue Zhang, XiaoTao Luo, ChangJiu Li 09:35-09:50 445 State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi’an Jiaotong University, China  Influence of impinging angle, particle shape and tamping on splats deformation and interface bond of cold sprayed Ti particles 09:50-10:20 Gang-Chang Ji 446 Jiangxi Province Engineering Research of Materials Surface Enhancing & Remanufacturing, School of Mechanical and Materials Engineering, Jiujiang University, China 10:20-10:35 Tea Break Plasma Spraying Session Chair: Prof. Fuxing Ye， Prof. Lidong Zhao  Suspension plasma spray fabrication of black titanium dioxide photocatalytic coatings with visible light absorption performances 10:35-11:00 459 Hua Li, Mengjiao Zhai, Yi Liu, Jing Huang Chinese Academy of Sciences, China

Comparative investigation on the electrical properties of plasma sprayed TiO2 and TiO2-Al2O3 coatings 11:00-11:15 Zengjie Wang, Dingyong He, Zheng Zhou, Guohong Wang 447 College of Materials Science and Engineering, Beijing University of Technology, China Effect of heat-treated on the microstructure of micro-plasma sprayed hydroxyapatite coatings 11:15-11:30 Xiaomei Liu, Dingyong He, Zheng Zhou, 448 Beijing University of Technology, China Effect of heat-treated on the microstructure of sprayed hydroxyapatite coatings 11:30-11:45 Xiaomei Liu, Dingyong He, Zheng Zhou 448 Beijing University of Technology, China Tailoring porous structures of nano Zinc Oxide coatings by liquid plasma spraying for enhanced photocatalytic performances 11:45-12:00 Kuan Chen, Jiang Wang, Hua Li 457 Shanghai University, Chinese Academy of Sciences, China Development of a FeCrMnBC-based economical wear and corrosion resistant coating 12:00-12:15 Kirsten Bobzin, Lidong Zhao, Mehmet Öte, Tim Königstein 459 Surface Engineering Institute, RWTH Aachen University, Germany 12:00-13:00 Lunch HVOF Session Chair:Prof. Guan-Jun Yang，Prof, Bolin Zha Influence of the temperature on the microsturcture and wear performance of HVOF sprayed bimodal WC-12Co coatings 13:30-13:55 458 Fuxing Ye, Pengbo Mi

- 26 - School of Materials Science & Engineering, Tianjin University, China Optimization of spray parameters on the corrosion behavior of HVOF sprayed Fe-based amorphous coatings 13:55-14:10 Lei Qiao, yuping Wu, Sheng Hong 460 College of Mechanics and Materials, Microstructures, phase compositions and properties of warm sprayed HATi composite coatings Yanlong Zou, Gangchang Ji, Qingyu Chen, Hailong Yao, Xiaobo Bai, Fang Wang 14:10-14:25 450 Jiangxi Province Engineering Research of Materials Surface Enhancing & Remanufacturing, School of Mechanical and Materials Engineering, Jiujiang University, China

A comparative study of HA/TiO2 and HA/ZrO2 composite coatings deposited by high-velocity suspension flame spraying Hai-Long Yao 14:25-14:40 - Jiangxi Province Engineering Research of Materials Surface Enhancing & Remanufacturing, School of Mechanical and Materials Engineering, Jiujiang University, China Microstructure and wear behavior of Al0.6TiCrFeCoNi high entropy alloy coating produced by HVOF 14:40-14:55 Lijia Chen, Zheng Zhou, Zhen Tan, Dingyong He 460 College of Materials Science and Engineering, Beijing University of Technology, China Detonation spraying of the copper powder coated with graphene 14:55-15:10 Tomasz Babul, Anna Olbrycht, 461 Institute of Precision Mechanics, Poland Microstructure and properties of laser re-melting FeCoCrNiAl0.5Six high-entropy alloy coatings 15:10-15:25 Bingqian Jin, Nannan Zhang, 461 Department of Material Science and Engineering, Shenyang University of Technology, China Preparation and flowability of shell-core-structured graphite-gray cast iron powder for thermal spray application 15:25-15:40 Na Shi, Li He, Xiao Feng, Ya-Zhe Xing 462 School of Materials Science and Engineering, Chang'an University, China 15:40-15:50 Tea Break Thermal Barrier Coatings Session Chair: Prof. Hua Li，Prof. Wei-Ze Wang

 A highly porous thermal barrier coating based on Gd2O3–Yb2O3 co-doped YSZ 15:50-16:15 Lidong Zhao, Kirsten Bobzin, Mehmet Öte, Tim Königstein 463 Surface Engineering Institute, RWTH Aachen University, Germany  Novel non-parabolic kinetic model for long term oxidation of MCrAlY bond coat Guan-Jun Yang, Bang-Yan Zhang, Guang-Rong Li, Chang-Jiu Li 16:15-16:40 463 State Key Laboratory for Mechanical Behavior of Materials, School of Materials Science and Engineering, Xi’an Jiaotong University, China  Nondestructive thickness measurement and interface morphology characterization of thermal barrier coatings based on terahertz time-domain spectroscopy 16:40-17:05 Weize Wang, Dongdong Ye, Jibo Huang, Xiang Lu 451 Key Lab of Safety Science of Pressurized System, Ministry of Education, School of Mechanical and Power Engineering, East China University of Science and Technology, China The evaluation of durability of plasma-sprayed thermal barrier coatings with double-layer bond coat 17:05-17:20 Xin-Yu Peng, Xiao Li, Hui Dong, 454 Xi'an shiyou university, China Thermal shock resistance of thermal barrier coatings with different shapes processed by laser 17:20-17:35 Panpan Zhang*, Fuhai Li**, Xiaofeng Zhang**, Zhihui Zhang**, Luquan Ren*, Min Liu** 464 *: University; **: Guangdong Institute of New Materials, China Effect of particle size on the cracking behavior of plasma-sprayed YSZ coatings during thermal shock and erosion testing Jibo Huang, Weize Wang, Dongdong Ye 17:35-17:50 455 Key Lab of Safety Science of Pressurized System, Ministry of Education School of Mechanical and Power Engineering East China University of Science and Technology, China Sintering mechanism of plasma-sprayed TBCs-From free-standing to constrained states 17:50-18:05 456 Guang-Rong Li, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, China

- 27 - 13 September 2018 • Frictional and Wear Room 310 Chair：Prof. Ruiming Ren, Prof. Minhao Zhu, Prof. You Wang Session Chair：Prof. Ruiming Ren Time Title Page Explore application of electron work function in development of tribo-materials 08:30-09:00 Dongyang Li* - University of Alberta The abrasive wear of an advanced medium Mn transformation-induced plasticity steel 09:00-09:30 Xiaojun Xu and Minhao Zhu* - Southwest Jiaotong University Session Chair：Prof. Minhao Zhu Correlation between microstructure evolution, strain-hardening in friction-induced deformation layer and wear behavior of 40Cr steel 09:30-09:50 470 Shuang Liang and Xicheng Wei* Shanghai University A wear trend forecasting model of gas turbine ongoing research based on optimized genetic algorithm and improved bp neural network 09:50-10:10 478 Jiasi Sun* AECC Shenyang Engine Research Institute 10:10-10:30 Tea Break Research on the wear and tear of the U-Shaped ring of power transmission line in northwest wind area 10:30-10:50 Pingping Lu and Xinmei Li* - University Influence of the cementite morphology on rolling wear of D2 wheel steel 10:50-11:10 Lin Ma and Ruiming Ren* 481 Dalian Jiaotong University Friction and wear behavior of H13 steel processed by laser surface remelting 11:10-11:30 Zhi-xin Jia* 475 Ningbo Institute of Technology, Zhejiang University The influence of grit dimension on the friction and wear behavior of CT80 tubing 11:30-11:50 Dong Hui* 474 Xi’an Shiyou University 12:00-13:00 Lunch Session Chair：Prof. You Wang Surface microstructure evolution of CL65 in wear 13:00-13:00 Rui Pan and Ruiming Ren* 477 Dalian Jiaotong University Influence of nitride and multiple peening on surface characteristic of AISI D2 13:30-14:00 Koichiro Nambu* 469 Toyota Technological Institute

Sliding wear behavior of nano-structured Al2O3-YSZ coatings fabricated by plasma spraying 14:00-14:30 Zhaoyi Pan* 480 Xi’An Space Engine Company Limited Influences of yttrium addition on the porosity reduction and tribological properties of (W,V,Ti)C-8%Co cemented carbide alloy 14:30-14:50 Linbo Chen and Guomin Hua* 481 Jiangsu University Tribological properties of thermally sprayed WC-10Co-4Cr coatings with nano-additives 14:50-15:10 Xue-wei Li and You Wang* 472 Heilongjiang University of Science and Technology 15:10-15:30 Tea break Wear behaviors of the arc-sprayed FePSiB-based amorphous and nanocrystalline coatings 15:30-15:50 Jiangbo cheng* 473 Hohai University

Tribological properties of plasma sprayed Al2O3-TiO2 coatings with nano graphite 15:50-16:10 Yue wang and You Wang* 478 Harbin Institute of Technology Friction and wear properties of argon arc cladding Ni-based nanocrystalline coatings 16:10-16:30 Junsheng Meng* 480 Shan Dong Jiao Tong University Weihai Campus Study on strengthening wear resistance and friction reducing of epoxy composite coatings 16:30-16:50 Yan Hao and Xiying Zhou* 479 Shanghai University of Engineering Science Comparative study on microstructures and tribological properties of the sulfurizing layers prepared on different cladding coatings 16:50-17:10 476 Gang Cui* China University of Petroleum - 28 - 13 September 2018 • Characterization and Evaluation of Residual Stress；Shot Peening Room 313

Chair: Prof. Chuanhai Jiang, Prof. Shuyan Zhang, Prof. Kemao Lv Session Chair:Prof. Chuanhai Jiang, Prof. Shuyan Zhang Time Title Page  Stress evaluation using synchrotron X-ray and neutron diffraction 08:30-08:55 Shuyan Zhang 517 Dongguan Centre of Excellence for Advanced Materials The Abstract of national standard of china GB/T 7704-2017 non-destructive testing –practice for residual stress measurement by X-Ray 08:55-09:20 516 KeMao Lv AST Co. Ltd.  Simultaneous residual stresses and retained austenite measurement mapping on heat treated SS416 09:20-09:45 Mohammed Belassel 517 Proto Manufacturing Inc.,  Investigation on residual stress relaxation behavior of shot peened Inconel 625 under applied loading 09:45-10:10 L.H. Wu 518 Shanghai Jiao Tong University 10:15-10:25 Tea Break Evaluation of internal residual stress in rolled pure copper plate 10:25-10:40 Xinghan Dong 510 Dalian University of Technology Effect of laser shock processing and aluminizing on microstructure and high temperature creep properties of 321 stainless steel 10:40-10:55 Dongliang Xu 511 Changsha University of Science & Technology Investigation on residual stresses in welded beryllium and quenched superalloy by neutron diffraction measurement and finite element simulation 10:55-11:10 515 Yalin Huang Institute of Nuclear Physics and Chemistry, Chinese Academy of Engineering Physics Experimental research on effect of cryogenic treatment on residual stress of M42 high speed steel 11:10-11:25 Zhi Chen 520 Taiyuan University of Science and Technology Research progress and application of residual stress neutron diffractometer at CMRR 11:25-11:40 Yi Tian 512 Institute of Nuclear Physics and Chemistry, Chinese Academy of Engineering Physics Influence of milling parameter on 3D surface topography and fatigue behavior of TB8 titanium alloy 11:40-11:55 Yanqiu Fan 525 AVIC Manufacturing Technology Institute Effect of ultrasonic shot peening on microstructure and properties of stainless steel 11:55-12:10 Kejian Li 525 Chongqing University of Science & Technology 12:00-13:00 Lunch Session Chair: Prof. Kemao Lv, Prof. Henry Pan

Time Title Page  Strengthening technology of shot peening and residual stress analysis on key components 13:00-13:25 Chuanhai Jiang 519 Shanghai Jiao Tong University  International stress engineering centre - a proposed international facility for hybrid multi-scale stress measurements 13:25-13:50 Shuyan Zhang 522 Dongguan Centre of Excellence for Advanced Materials  Research on residual stress distribution of the Al18B4O33 whisker reinforced Al matrix composite after shot peening 13:50-14:15 Yihan Wu 516 Shanghai Jiao Tong University

- 29 - Surface strengthening behaviors of metals induced by 3S: Microstructure evolution, strengthening mechanisms and property optimization 14:15-14:30 521 Chuanxi Ren Institute of Metal Research, Chinese Academy of Sciences Effects of water jet shot peening pretreatment on contact fatigue properties of 42CrMo steel after plasma nitriding 14:30-14:45 Guomeng Li 522 University Study on the relaxation of residual stress and high temperature fatigue strength of 17-4PH shot peening surface at elevated temperature 14:45-15:00 520 Mingxia Liu Shaanxi Key Laboratory of Surface Engineering and Remanufacturing 15:00-15:10 Tea Break  Investigation of residual stress fields of Mg-8Gd-3Y-0.4Zr alloy after multiple shot peening process 15:10-15:35 Huabing Liu 523 Shanghai Jiao Tong University  Investigation on the thermostability of residual stress and microstructure in shot peened SAF 2507 duplex stainless steel 15:35-16:00 Ming Chen 523 Shanghai Jiao Tong University Fatigue crack propagation behavior of Ti17 titanium alloy under laser shock peening induced residual stress 16:00-16:15 Rujian Sun 524 Beihang University Applications of the residual stress analysis method based on full two-dimension （Full 2D）detector technology in the metallic fields 16:15-16:30 521 Dan Jia Quantum Design China Comparison of ultrasonic impact treatment and shot peening on material’s surface microstructure and properties 16:30-16:45 Yongheng Ni 523 Academy of Army Armored Force Evaluating the fatigue cracking risk of surface strengthened 50CrMnMoVNb spring steel with abnormal life time distribution 16:45-17:00 Dongqiqiong Wang 514 Institute of Metal Research, Chinese Academy of Sciences Effect on anti-fatigue performance of corroded holes structure by cold expansion 17:00-17:15 Shuai Hou 524 Academy of Army Armored Force X-ray stress analysis technique using the optimization of d0 with error term direct refinement solution (drs) method 17:15-17:30 Hongbin Qian - Beijing Semboo Science and Technology Co., Ltd Application of Ultrasonic Method in Surface Residual Stress Detection 17:30-17:45 - Hangzhou Jianwei Electromechanical Science and Technology Co., Ltd

The concept of "Heat Treatment of Metals" journal arose from express and perceived demand from Chinese heat treatment workers and influential organisation, expert. It has been published for 58 years. It is one of the best journals in Chinese heat treatment industry, and also has a great influence in machinery, metallurgy, automobile, aviation, aerospace, shipbuilding and other manufacturing areas. This quarterly periodical offers reliable and up-to-date science, technology, practice and business information in the field of heat treatmentto a national readership of scientists, engineers, students, economists, government departments etc. The journal’s owners are China Machinery Industry Federation, Beijing Research Institute of Mechanical and Electrical Technology, Chinese Heat Treatment Society and China Heat Treatment Association. The publication process and production are in the hands of Heat Treatment of Metals journal editorial department.

- 30 - 13 September 2018 • Failure Analysis Room 306

Chair：Prof. Zhenguo Yang，Prof. Yaorong Feng Opening Ceremony Time Title Page Session Chair：Prof Zhenguo Yang  The danger of "Assumptions" 08:30-09:00 Jeffery Henry - ATC-Engineering Service  Pipeline failure and its monitoring 09:00-09:30 Zheng Zhang - Beihang university  Fracture control of west to east gas pipeline in China 09:30-10:00 Yaorong Feng - CNPC Tubular Goods Research Institute 10:00-10:30 Tea Break Session Chair：Prof Yaorong Feng  Failure analysis and prevention of heat - resistant alloy tube in petrochemical industry 10:30-11:00 Xuedong Chen,Tao Chen 549 National Technology Research Center on Pressure Vessel and Pipeline Safety Engineering  Fatigue fracture mechanics of materials and failure analysis of components 11:00-11:30 Zhefeng Zhang - Institute of Metal Research, Chinese Academy of Sciences  New interpretation of materials failure analysis and its application 11:30-12:00 Zhenguo Yang 546 Fudan University 12:00-13:00 Lunch Session Chair：Prof. Zheng Zhang Failure analysis of the balance ball pin in the car steering system 13:30-13:45 Guo Ruidong 551 Southwest University of Science and Technology Failure analysis on leaked titanium tubes for seawater heat exchanger in recirculating cooling water system of coastal nuclear power plant 13:45-14:00 552 Gong Yi Fudan University Failure analysis of an automotive bushing 14:00-14:15 Deng Ailin 551 Southwest University of Science and Technology Thermally grown oxide (TGO) formation and growth in double-layered composite thermal barrier coating and failure mechanism analysis 14:15-14:30 - Ran wang Academy of Armored Forces Engineering Research on crack propagation in weld seam of spiral coil waterwall based on stress superimposed effect 14:30-14:45 Yan Zhenrong 532 Shanghai Boiler Works Co.,Ltd. Study the cases of the cracking failure of automobile steering knuckle 14:45-15:00 Sun Weilian 552 Hebei Agricultural University Failure analysis of regenerative gas electric heater outer wall cracking 15:00-15:15 Zhao Bo 554 China Special Equipment Inspection and Research Institute 15:15-15:30 Tea Break Session Chair：Prof Zhefeng Zhang Experience with grade 91 DMW failures – features and current understanding 15:30-15:45 Zhou Gang - ATC-Engineering Services 15:45-16:00 Failure analysis of gear on rail transit 535 - 31 - Pan Anxia CRRC Qishuyan Institute Co.,Ltd. Co-occurrence analysis of thermal power plant failure cases 16:00-16:15 Jiahui Lv 536 East China University of Science and Technology Investigation on typical failure mode of high-pressure hydrogen storage tanks for vehicles 16:15-16:30 Yuan Yiwen 553 Shanghai Institute of Special Equipment Inspection and Technical Research Failure analysis of super 13Cr tubing in high temperature and ultra-deep sour gas well 16:30-16:45 Zhang Zhi 537 Southwest Petroleum University Failure analysis of quenching cracking of 45 steel flange 16:45-17:00 Hao Ce 548 Hebei Agricultural university

14 September 2018 • Failure Analysis Room 306

Session Chair：Prof Tong Xu Three fatigue failure analysis of gas cylinder for long tube trailer 08:30-08:45 Jianming Zhai 557 China Special Equipment Inspection and Research Institute Design and test analysis of bionic subsoiler tip 08:45-09:00 Jianyong Guo 553 Heilongjiang Bayi Agriculture University Failure analysis on fractured carbon dioxide fracturing tube 09:00-09:15 Jiangang Wang 558 Hebei University of Science and Technology Failure analysis on the cracking of girth weld joint of steam pipline 09:15-09:30 Ming Song 561 China special equipment inspection and research institute Investigation on tensile failure of heat-treated rigid polyurethane foam by experiment and numerical simulation 09:30-09:45 Yannan He 540 Fudan University Metallographic automatic rating technology and its application through machine learning 09:45-10:00 Li Zhang 558 Guangdong University of Technology 10:00-10:30 Tea Break

Session Chair：Prof. Weilian Sun Failure analysis on energy conservation equipment in waste heat boiler system 10:30-10:45 Shenghui Wang 561 Shanghai Institute of Special Equipment Inspection & Technical Research The influence of copper on the stress corrosion cracking of 304 stainless steel 10:45-11:00 Xuehan Wang 554 Zhejiang University of Technology Fatigue failure of a horizontal tail's hollow shaft of an aircraft - the impacts of surface integrity and stress concentration 11:00-11:15 Youli Zhu 556 Armored Forces Institute of the Army Fracture failure analysis of the outer ring from a grease-lubricated cylindrical roller bearing in an air blower motor 11:15-11:30 Jiaojiao Xi 542 Fudan University Pipeline failure analysis of phenol acetone 11:30-11:45 Hui-gu Yang 559 Shanghai Institute of Special Equipment Inspection & Technical Research Design and test analysis of bionic subsoiler tip 11:45-12:00 Qingda Li 553 Heilongjiang Bayi Agricultural University

- 32 - 13 September 2018 • Microstructure and Properties Room 312

Chair：Prof Wei Xu，Prof Hao Chen，Prof Haruna Ishizuka Session Chair：Prof Xingtai Zhou,Prof Hao Yu, Prof Xiaohua Min Time Title Page  The effect of post-weld heat treatment on the carbide evolution of Hastelloy N alloy in heat affected zone 08:30-09:00 Wanxia Wang, Chaowen Li, Li Jiang, Xiangxi Ye, Kun Yu, Shuangjian Chen, Zhijun Li, Xingtai Zhou 594 Shanghai Institute of Applied Physics, Chinese Academy of Sciences  Effect of Si and Cr on surface microstructure formed by lithium doped salt-bath nitrocarburizing in Fe-0.4 wt%C 09:00-09:30 1Haruna Ishizuka, 1Youichi Watanabe, 2Masao Takeyama 584 1. Parker Netsushori Kogyo Co., Ltd., 2. Tokyo Institute of Technology Effect of annealing temperature on texture and magnetic properties of 6.5%Si Ultra-thin Strip 09:30-09:45 Siyu Zhang, Yonglin Ma, Yunpeng Zhao, Shuqing Xing 594 University of Science and Technology Effect of tempering temperature on low carbon bainite steel plate 09:45-10:00 1Yongda Yang, 1Yanfeng Wang, 1Guobiao Di, 1Changwen Ma, 1Qingshen Ma, 2Chengliang Han, 2Dongli Meng 597 1Shougang Group Co.,Ltd. Research Institute of Technology, 2Qinhuangdao Shouqin Metal materials Co.,Ltd 10:00-10:15 Tea Break Fatigue life enhancement mechanism of TB9 Hi-bolt 10:15-10:30 Qingyun Zhao 595 Department of Mechanical Joining, Aeronautical Manufacturing Technology Research Institute Preparation of Mo5SiB2 powder by mechanical alloying and annealing 10:30-10:45 Yao Zhang, Guojun Zhang 585 School of Materials science and Engineering, Xi’an University of Technology Evaluation method of fatigue life based on damage mechanics 10:45-11:00 Yajun Zhang 595 Luoyang Ship Material Research Institute The effect of twins and substructures evolution on dynamic recrystallization behaviors in Ni-30Fe austenitic alloy 1Wenxiong Chen, 2Chengwu Zheng, 2Dianzhong Li 11:00-11:15 1. Shenyang National Lab. for Materials Science, Institute of Metal Research, CAS, Wenhua Road 72, Shenyang110016, China, 2. 586 School of Materials Science and Engineering, University of Science and Technology of China, Wenhua Road 72, Shenyang 110016, China, 3. Shenyang National Lab. for Materials Science, Institute of Metal Research, CAS, Wenhua Road 72, Shenyang110016, China Phase transformation and irradiation effects of BN/BAS ceramic composites induced by charged argon ion beam 1Qian Li, 2Bo Zeng, 1Zhihua Yang, 1Dechang Jia, 3Xiaodong Zhang, 3Yu Zhou 11:15-11:30 596 1. Institute for Advanced Ceramics, Harbin Institute of Technology, 2. Material Science and Engineering School, Harbin Institute of Technology, 3. School of Materials Science and Engineering, Harbin Institute of Technology The high-temperature tensile behaviors of vanadium-containing 25Cr-20Ni austenitic stainless steels 11:30-11:45 Guodong Hu, Pei Wang, Shenghua Zhang, Dianzhong Li, Yiyi Li 588 Shenyang National Laboratory for Materials Science, Institute of Metal Research Effect of annealing temperature on the microstructure and mechanical properties of the ferrtic rolling low carbon steel sheet 11:45-12:00 1Hu Zhao, 2Pengfei Cheng, 2Jiangong Wang, 2Xiaodong Wang 599 1. Research Institute of Technology, Shougang Group, 2. Shougang Jingtang United Iron & Steel Co., Ltd. 12:00-13:00 Lunch  Influence of ferrite content and tempering temperature on the mechanical properties of HSLA steel 13:30-14:00 Hao Yu, Shaoyang Wang 597 University of Science and Technology Beijing  Effect of {332}<113> twinning on charpy impact behavior in metastable β-type Ti-15Mo alloy 14:00-14:30 1Kai Yao, 1Xiaohua Min, 2Satoshi Emura, 2Koichi Tsuchiya 590 1. Dalian University of Technology, 2. National Institute for Materials Science Microstructure and mechanical properties of uranium alloy impacted by steel projectile under different velocities 14:30-14:45 Dongli Zou, Lifeng He, Dawu Xiao, Zhicong Qiu 599 Institute of Materials, China Academy of Engineering Physics Fabrication, structure, and thermal stability of electroless Ni-Fe-P coating 14:45-15:00 591 1Juan Peng, 1Xueming Du, 2Zhiwen Chen, 1Han Zhang, 1Li Liu - 33 - 1. School of Materials Science and Engineering, Wuhan University of Technology, 122 Luoshi Road, Wuhan, , People’s Republic of China, 2. The Institute of Technological Sciences, Wuhan University, 129 Luoyu Road, Wuhan, Hubei, People’s Republic of China 15:00-15:15 Tea Break Effect of quenching temperature on the microstructure and corrosion behavior of X80 pipeline steel 15:15-15:30 1Ma Jing, 1Chen Haifeng, 1Feng Fan, 2Fan Lifeng 598 1. Hebei University of Science and Technology, 2. Inner Mongolia University Effect of thermal exposure on microstructure and mechanical properties of an Al-Zn-Mg-Cu alloy 15:30-15:45 1Yanqing Yang, 1Pan Dai, 2Jigang Ru 614 1. School of Materials Science & Engineering, Northwestern Polytechnical University, 2. Beijing Institute of Aeronautical Materials Surface characterization of a selectively dissolved Ni–Ni3Si eutectic alloy 15:45-16:00 Lufeng Wei, Zhilong Zhao 592 Northwestern Polytechnical University The effect of precipitation on the property of high strength steel plates under different heat treatment techniques 16:00-16:15 Yanqiu Fan 600 Shougang limited corporation Reaearch institute of technology CCT curves and microstructure of a new type bainitic wear-resistant casting steel 15:45-16:00 Bo Hu, Xianjun Li, Wenliang Zhang, Junjie Liu, Ping Luo, Kun Deng 598 Beijing Research Institute of Mechanical & Electrical Technology Preparation of molybdenum copper composite powder by wet chemical method and its sintering properties 16:15-16:30 Chenglin Sun, Guojun Zhang 593 Xi’an University of Technology Microstructure and mechanical property of Al/SiCp nanocomposite coating produced by cold spraying of ball-milled powder 16:30-16:45 Hongtao Wang, Hailong Yao, Xiaobo Bai, Qinyu Chen, Chao Yang, Gangchang Ji 596 Jiujiang University Investigations of the tensile properties and fracture characteristics of amorphous ribbons Fe81.50B1.40Si7.95Nb7.37Cu1.728 alloy 16:45-17:00 600 Lei Sheng Anhui Jianzhu University Poster List

No Title Name Institution Page CCT Curves and Microstructure of a New Type Bainitic Beijing Research Institute of Mechanical & poster1 Bo Hu 598 Wear-Resistant Casting Steel Electrical Technology Influences of inclination angles on microstructure and mechanical poster2 properties of 316L stainless steel parts fabricated by selective laser Cong Ni Changchun University of Science and Technology 272 melting (SLM) poster3 Failure analysis of 45 steel hydraulic cylinder ear Huiqiang Wang Hebei Agricultural University 562 Effect of mechanical alloying speed on properties of CNTs - SiC / Ni poster4 Longzhi Zhao East China Jiaotong University 492 laser cladding coating Three dimensional numerical simulation of temperature field of Ni poster5 Longzhi Zhao East China Jiaotong University 509 based superally in synchronization powder feeding laser cladding Effect of heat treatment process on ZrW2O8 synthesis by hydrothermal poster6 Longzhi Zhao East China Jiaotong University 91 method The tribological and electrochemical behavior of HVOF sprayed poster7 Sheng Hong Hohai University 467 WC-10Co-4Cr coatings A phase transformation to predict the high contact stress in bearing poster8 Guo Xian Zhejiang wanxiang precision industry co.,ltd 582 steel due to rolling contact fatigue

High sphericity nanostructured NiCrCoAlY-TiB2 powders poster9 Zou Yongming South China University of Technology - manufactured by Plasma spheroidization the microstructure and cutting performance of AlCrSiN poster10 Ying Gao AHUT - coatings:effects of working layer thickness Influence of thermo-hydrogen treatment on microstructure and Institute of Electronic Engineering, China Academy poster11 Hongzhi Liu 440 superplastic properties of Ti6Al4V alloy of Engineering Physics Improvement in resistance to surface pitting fracture of medium carbon Youichi poster12 steel by induction-heating and quenching after salt-bath Parker Netsushori Kogyo, Co., Ltd. 142 Watanabe nitrocarburizing Investigation of microstructure and mechanical properties of electroless poster13 Baofeng Chen Harbin Institute of Technology - Ni-P- nano TiN compsite coatings before and after heat treatment Microstructure evolution and impedance analysis of 7YSZ thermal poster14 Chen Wenlong Guangdong Industrial Analysis and Testing Center 441 barrier coating during gas thermal-shock

- 34 - characterization and properties of oxidation file formed on magnesium poster15 Rongfa Zhang Jiangxi Science and Technology Normal University - alloys with different K2ZrF6 concentration Heat treatment effects on the microstructure and mechanical properties poster16 Cui Chenshuo Northeastern University 91 of 11Cr-3Co-2.3W martensitic heat resistant steel Effect of nozzle distance on nitriding behavior of titanium alloy treated Graduate School of Science and Technology, Keio poster17 Shogo Takesue 140 by gas blow induction heating nitriding University Improved adhesion of TiAlSiN nanocomposite coatings on cemented poster18 Lei Wang Beihang University 439 carbide substrate by pre-implantation Effects of phosphate on structure and thermal shock resistance of PEO poster19 Jiang Yanli Harbin University 366 ceramic coatings on Ti6Al4V alloy

Photocatalytic water decomposition for hydrogen production on TiO2 poster20 Yanli Jiang Harbin University 421 loaded on foam nickel Numerical simulation study of abnormal-shaped aluminum wheel Beijing Research Institute of Mechanical & poster21 Runzhe Chen 175 quenching Electrical Technology Microstructure and wear behavior of Al0.6TiCrFeCoNi high entropy College of Materials Science and Engineering, poster22 Lijia Chen 460 alloy coating produced by HVOF Beijing University of Technology

Fabrication and characterization of dense Cr2O3-Al2O3 double coatings poster23 Jiao Di Huazhong University of Science and Technology 425 by electrochemical technique Formation and properties of Ca-doped barium titanate based coatings poster24 Linlin Wang Zhejiang Normal University 371 produced by plasma electrolytic oxidation

Influence of Al2O3 addition in NaAlO2 electrolyte on microstructure Key Laboratory of Advanced Structural-Functional poster25 and high-temperature properties of plasma electrolytic oxidation Zhao-Ying Ding 440 Integration Materials & Green ceramic coatings formed on Ti2AlNb alloy microtructure, inter-diffusion and thermal cycling life of YSZ thermal poster26 Zaoyu Shen Beijing Institute of Aeronautical Materials - barrier coatings by EB-PVD Effect of electrolyte composition on protective properties of PEO poster27 Ruzil Farrakhov Ufa State Aviation Technical University 365 coating on zirconium alloy Zr-1Nb Xiangxiang Shanghai Key Laboratory of Materials Laser poster28 effcts of Ni/Co on properties of aluminum bronze laser claddings 267 Huang Processing and Modification Low temperature plasma hardening of long and thin stainless steel poster29 Cheng Zhao Qingdao Fengdong Heat Treatment Co. Ltd. 117 tubes in the nuclear reactor poster30 Failure analysis on fractured carbon dioxide fracturing tube Jiangang Wang Hebei University of Science and Technology 558 The combination of deep cryogenic treatment with the traditional poster31 Gu Kaixuan Technical Institute of Physics and Chemistry 210 solution and aging treatment of 7050 aluminum alloy Additives on structure and anticorrosion of micro arc oxidation on poster32 Xue-Jun Cui Sichuan University of Science and Engineering 362 AZ31B magnesium alloy School of Advanced Materials, Peking University poster33 Hard and adherent a-C:H gradient coatings by stress engineering Xiaokai An Shenzhen Graduate School, Shenzhen 518055, 300 China Preparation and properties of ceramic coating on tantalum alloy by poster34 Wang Xiaobo China Academy Of Engineering Physics 355 plasma electrolytic oxidation Numerical simulation of slender rod in high pressure gas quenching Beijing Research Institute of Mechanical and poster35 Chen Xuyang 173 process Electrical Technology Study of Plasma electrolytic oxidation coated light-weight AlSi10Mg poster36 Ying Chen Huazhong University of Science and Technology 156 cellular lattice structures fabricated via selective laser melting

Elevated temperature wear behaviour of CeO2 modified WC-12Co poster37 Liu Yan Southwest Jiaotong University - coating Effect of interrupted aging T8I6 and T9I6 on microstructure and poster38 Daxiang Sun Guangdong Industrial Analysis and Testing Center 215 mechanical properties of aluminum alloy 2519A poster39 Research on the performance of hollow bolt yield ratio of 45steel Sun Weilian Hebei agricultral university 581 Study of the cracking failure reason of automobile steering knuckle and poster40 Sun Weilian Hebei agricaltural univercity - shaft Investigation on tensile failure of heat-treated rigid polyurethane foam poster41 Yannan He Fudan University 540 by experiment and numerical simulation Experimental study and finite element simulation on the vibration poster42 Jiacheng Wu Fudan University - failure of rigid polyurethane foam at high temperature fabrication and characterization of A highly corrosion-resistant poster43 nanocrystalline Al2O3/MgO Conposite Coating on Magnesium Alloy Yuchen Li xi'an jiaotong university 159 AZ33 Preparation of FeNi@N doped carbon composite coating on Ti Alloy poster44 via cathodic plasma electrolytic deposition and its oxygen evolution Zhongping Yao Harbin Institute of Technology - reaction Microstructure and properties of in-situ synthesized (Ti3Al+TiB)/Ti poster45 Yueqiao Feng Shanghai Jiao Tong University 281 composites by laser surface additive manufacturing Linker-Free Covalent Immobilization of Heparin, SDF-1a, and CD47 Shenzhen Institutes of Advanced poster46 on Polytetrafluoroethylene after Plasma Pre-Treatment for Liping Tong 315 Technology,Chinese Academy of Sciences Antithrombogenicity, Endothelialization and Anti-Inflammation Technical Institute of Physics and Chemistry, poster47 the latest developments of deep cryogenic treatment: a review Kaikai Wang 87 Chinese Academy of Sciences (CAS)

- 35 - Numerical simulation research and experimental verification of Beijing Research Institute of Mechanical & poster48 Weicheng An 174 continuous quenching process of high precision rack bar Electrical Technology Microstructure analysis (transmission electron microscope) of Ti80 poster49 Sijia Quan Henan University of Science and Technology 208 Alloy with Equiaxed Structure poster50 Copper matrix composites reinforced with mixing sized TiB2 Particles Shengli Zhang Henan University of Science and Technology - Failure analysis on abnormal combustion of transformers in offshore poster51 Yi-Min Zhu Fudan university 568 wind turbines poster52 Failure analysis of pipe fittings of steam system in chemical plant Xiao-Lei Yang Fudan University - The analysis and optimization of distortion in die quenching process poster53 Yingtao Zhang Hohai Uniersity 136 for spiral bevel gear Effect of different heat treatment time on wear performance of poster54 Chao Liu Henan University of Science and Technology 448 Al2O3-13wt.%TiO2 Coating a. School of Materials Science and Engineering, Microstructure and properties of MWCNTs/TiB2 hybrid reinforced Henan University of Science and Technology, poster55 copper matrix composites prepared by spark plasma sintering Fei Long Luoyang, PR China; b. Key Laboratory of Materials 206 Technique Science & Processing Technology for Non-ferrous Metals of Henan, Luoyang, PR China Fracture failure analysis of the outer ring from a grease-lubricated poster56 Jiaojiao Xi Fudan University 542 roller bearing in an air blower motor The Corrosion characteristics of new Cu-Ni-Al alloy in artificial poster57 Zhengcheng Song Henan University of Science and Technology 205 seawater Tianjin Heavy Equipment Engineering Co., Ltd, Numerical and experimental investigation of the austenite poster58 Xj Zhang China First Heavy Industries, 300457 Tianjin, PR 508 decomposition kinetics of 50Cr5NiMoV steel China Study on mechanical properties of laser cladded graphene nanoplatelets poster59 Pingshun Deng Shanghai Jiao Tong University 266 reinforced Inconel 625 superalloy composite coating Evaporation of small droplets in plasma spray-physical vapor poster60 Meijun Liu Xi'an Jiaotong University 464 deposition based on plasma heat transfer poster61 Erosion test of electroless deposited Ni-Fe-P alloy coatings Shaofeng Zhu Energy saving institute of Anhui Jianzhu university 487 poster62 Several methods of reducing testing errors in rockwell hardness Chunchen Yao Jiangnan Industries Group Co.,Ltd - Selection of heat treatment process parameters of H13 hot die steel poster63 Wenchao Wang Henan University of Science and Technology 610 based on orthogonal test Hardness loss and microstructural evolution of 50% hot-rolled 2% - poster64 Mu Gu Hefei University of Technology 235 Y2O3 dispersion strengthened tungsten at 1250-1350 ℃ Competitive converging dendrites growth during directional State Key Laboratory of Solidification Processing, poster65 Songsong Hu 6 solidification of Ni-based bi-crystal superalloy Northwestern Polytechnical University Synthesis of monolayer MoNx and nanomultilayer CrN/Mo2N poster66 Canxin Tian Lingnan Normal University - coatings using arc ion plating poster67 Influence of metal coating on laser welding of glass Wang Hao South China Normal University 270 Characterization and wear behaviors of SUJ 2 steel in different poster68 Chiu Liu-Ho Tatung University 622 microstructures poster69 Plasma electrolytic polishing of steel after diffusion saturation Sergei Kusmanov Kostroma State University 376 Investigation on wear resistance of nodular cast iron by laser surface poster70 Hongyin Zhu Changchun University of Science and Technology 269 treatment Evaluation of environmental performance for electrolytic plasma poster71 Veta Mukaeva Ufa State Aviation Technical University - processes Effects of niobium addition and aging treatment on the microstructural Department of Mechanical Engineering, Southern poster72 Chung Chun Wu 612 changes and mechanical properties of the Fe-30Mn-7Al-1.1C Alloy Taiwan University of Science and Technology Abrasion and erosion behavior of DLC-coated oil-well tubing in a poster73 Liangliang Liu Peking University Shenzhen Graduate School 299 heavy oil / sand environment Anti-corrosive microarc oxidation film modified with layered double poster74 Baojie Dou Sichuan University of Science & Engineering 375 hydroxide on 6061 Al alloy High rate deposition of CrxN coatings using a new cylindric HiPIMS poster75 Shu Xiao Peking University Shenzhen Graduate School 316 system A successful self-lubricant additive (CePO4) of micro-arc oxidation poster76 Qian Huang Peking University Shenzhen Graduate School - coatings on Al-alloy Quenching homogenization in nozzle-type high pressure gas quenching Beijing Research Institute Of Mechanical & poster77 Wang Tong 150 furnace Electrical Technology Modeling carburization heat treatment processes of steel camshaft in poster78 Jianpin Li Beijing AutoCAE Technology Co.,Ltd. 500 marine engine using commercial software DANTE Improved oxidation of CoNiCrAlTaHfY coatings on C/C composites poster79 Qi Guo Taiyuan University of Technology - by adding Co intermediate buffer layer State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, poster80 Drilling in inconel 718 by femtosecond laser with burst mode Xuan Liu Changsha 410082, China； Hunan Provincial Key 261 Laboratory of Intelligent Laser Manufacturing, Hunan University, Changsha 410082, China Effect of heat treatment parameters on microstructure and mechanical National Eng. R＆D Center for Heavy Machinery poster81 Xiaoyang Song 606 properties of a modified AISI 4140 Steel Technologies, Tianjin Heavy Industries Research ＆

- 36 - Development Co., Ltd, China First Heavy Industries, 300457 Tianjin, PR China Development of induction heating and tempering production line of Beijing Research Institute of Mechanical & poster82 Wenliang Zhang 152 high-diameter ratio bar Electrical Technology Improvement of fatigue strength of carburizing steel 20MnCrS5 during poster83 Shan Miao Saitama Institute of Technology 71 carburizing quenching National Engineering Research Center for The optimization design of large cylinder induction heating equipment poster84 Jianliang Sun Equipment and Technology of Cold Strip Rolling, 138 and process based on skin effect and Curie point effect Yanshan University, Qinhuangdao 066004 Effect of the flow rate and the Co2+/Ni2+ ratio in plating solution on the Science and Technology on Remanufacturing poster85 microstructure and properties of jet-electrodeposited Co-Ni alloy Tan Jun 412 Laboratory coating First-principles study of the effects of impurity S and additives (Hf, Pt, College of Materials Science and Engineering, poster86 Nan Dong 232 Y, Ce) on the bonding strength of Fe/Al2O3/Cr2O3 interface Taiyuan University of Technology Effects of combined shot peening and micro arc oxidation on corrosion Institute of Machinery Manufacturing Technology, poster87 Zuoyan Ye - fatigue behaviors of aluminum alloy China Academy of Engineering Physics National Key Laboratory for Precision Hot The microstructure of retained austenite and its poster88 Danni Yang Processing of Metals, Harbin Institute of - Strengthening-toughening mechanism in 300M Steel Technology, china Effect of two-step q&p treatment on microstructure and properties of poster89 Aorigele Bao Harbin Institute of Technology - 65Si2MnWA steel Parameters optimization design of quenching and partitioning based on poster90 Mingqing Liao Harbin Institute of Technology 76 artificial neural network and particle swarm optimization The process optimization of organic-inorganic hybrid perovskite thin poster91 Tianyi Han Harbin Institute of Technology 91 film Phase transition of two-dimenssional oxide crystal from topological poster92 Fei Zhou Harbin Institute of Technology - phase to perovskite Nanjing KERUN Lubricants poster93 the wetting process during quenching and its experimental assessment Hansen Yu 175 Co.,Ltd.,NanjingJiangsu Stress relaxation performance and thermal calibration of TC4 titanium poster94 Wang Quan Harbin Institute of Technology 506 alloy at high temperature Guangdong University of Technology, School of Preparation and corrosion resistance of chromium-free Zn-Al coatings poster95 Junfeng Gou Electromechanical Engineering, Guangzhou, - with different mixing ratios of silane coupling agents 510006, PR China Study on dry sliding friction-induced deformation layers at different School of Materials Science and Engineering, poster96 Peng Zhu 484 wear stages of 30CrMnSi steel and its wear behavior Shanghai University Mechanical shock tests and a failure analysis for pins of a stacked poster97 Xin Tao Department of Materials Science, Fudan University 539 memory device in aerospace Microstructure and properties of DLC films coated on titanium and poster98 Arachi Uozumi Saitama Institute of Technology - stainless steel by magnetron sputtering Effects of solution and aging treatment on reverse austenite in 17-4PH poster99 Zhang Yixin Harbin Institute of Technology 72 stainless steel Effect of carbon nanotubes on the properties of ceramic coatings poster100 Zhongzhi Yao Zhejiang University of Technology - prepared by sol-gel combined laser cladding poster101 Isothermal phase transition kinetics of TC11 titanium alloy Zhang Lifang Harbin Institute of Technology 504 College of Materials and Energy, Guangdong preparation and characterization of ta-C thin films with high hardness poster102 Yuting Li University of Technology /Guangdong Institute of - and toughness on YG6 cemented carbide New Materials poster103 The growth of TiCN films by Arc Ion Plating Lian Liu Guangdong Institute of New Materials 288 Effect of ignition pulse on microstructure and properties of CrN/TiN poster104 Chunzhi Gong Harbin Institute of Technology 317 films using multi-pulse HIPIMS poster105 diamond-like carbon film with excellent tribomechanical properties Chaoqian Guo Guangdong Institute of New Materials - China Special Equipment Inspection and Research poster106 Failure analysis of excessive corrosion in wastewater treatment reactor Bo Zhao 575 Institute Corrosion and wear behavior of ceramic coatings formed by microarc poster107 Wanhui Liu Changshu Institute of Technology 358 oxidation on 7N01 aluminium alloy Application of Profibus-DP fieldbus in data communication of heating Beijing Research Institute of Mechanical & poster108 Qiangnan Du 157 furnace control system Electrical Technology Influence of quenching and partitioning in bainite zone on the poster109 Hongying Lü Henan University of Science and Technology 37 microstructure and mechanical properties of QP980 Steel Institute of Materials Modification and Modelling, Effect of residual stress on indentation and rebound hardness poster110 Daming Tong School of Materials Science and Engineering, 502 measurment Shanghai Jiao Tong University Finite element analysis of non-linear contact wear of u-shaped ring of School of Mechanical Engineering, XinJiang poster111 Pingping Lu 479 power tools University. A true change of directionally solidified NiAl-Cr(Mo) eutectic lamellar School of Materials Science and Engineering, Xi’an poster112 Lei Wang - structure during high temperature treatment University of Technology, Xi’an 710048, China. Study on the chromogenic mechanism and optical absorption School of Material science and Engineering, Xi'an poster113 Dong Boxuan 341 properties of black ceramic coating of magnesium alloy micro-arc University of Technology

- 37 - oxidation poster114 Influence of annealing temperature on microstructure and erosive wear Qiushi Wu Xi'an University of Technology 314 properties of the CrxAlyY1-x-yN coatings Effect of shell foaming agent on physical properties of AlSi7Mg Alloy poster115 Jun-Wen Li Dalian Jiaotong University 45 Closed Cell Foam Collaborative Innovation Center of Steel poster116 Study on the thermal stability of nanoscale bainite/martensite steel Xinpan Yu Technology, University of Science and Technology 35 Beijing Shaanxi Fast Auto Drive Engineering Research poster117 Effect of intercritical quenching on microstructure and Weimin Gui 154 microhardnessof a low carbon carburized steel Institute poster118 Fracture failure analysis on ultra supercritical turbine bolts Nan Li Central Iron and Steel Research Institute 580 The State Key Laboratory of Rolling and poster119 Evolution of microstructure and strain-induced precipitates in Nb-Ti Meina Gong Automation, Northeastern University, Shenyang 601 extra heavy slab during hot-core heavy reduction rolling 110819, China State Key Laboratory of Rolling and Automation, poster120 Huang Long 620 A new TiC reinforced low alloy abrasion resistant steel Northeastern University, Shenyang State Key Laboratory of Rolling and Automation, poster121 Formation of High Strength and high plasticity nano/ultrafine structure Jia Liu 615 by martensite reversion in 18Cr-8Ni austenitic stainless steel Northeastern University poster122 Grain refinement and mechanical properties of a Fe-30Mn-0.11C steel Jianmei Kang Yanshan University poster123 A combined experimental and first-principle study on the oxidation Dongbo Wei of Aeronautics and Astronautics 426 behavior of plasma surface Ta-W alloyed γ-TiAl poster124 Wear resistance of Al2O3 /WC-Co/Epoxy coatings on TC18 Yuqin Yan Nanjing University of Aeronautics and Astronautics 426 (Ti-5Al-5Mo-5V-1Cr-1Fe) alloy Central Laboratory, Central Iron and Steel Research poster125 Fracture failure analysis on the bottom side beam of Q355GNH Long Liu 545 container Institute, Beijing Institute of process engineering, Chinese of poster126 Study on the transfer behavior of polyimides adding aluminum rubbing Liu Ruoyu 490 with Ti-6Al-4V alloy at different temperatures Academy a. School of Energy Science and Engineering, Photocatalytic performance ofg-C3N4 doped PEO coating under poster127 Wei Tao University of Electronic Science and Technology of - ultraviolet and visible light China. , 610000, China Inner Mongolia University of Science and poster128 Study on static recrystallization behavior of austenite during hot Lin Chen - deformation of heavy rail steel Technology Department of Foundation, Naval University of poster129 Investigation on electrochemical behavior of TA2 alloy treated by Yulong Hu 372 micro-arc oxidation Engineering poster130 In situ sythesis TiN reinforced Fe-based amorphous coating by reactive Wang Miqi Hohai University - plasma spraying School of Mechanical Engineering and Automation, poster131 The effect of titanium interlayer thickness on mechanical properties of Guodong Li 315 TiAlSiN/Ti multilayer coatings Beihang University, Beijing, P.R. China poster132 Degassing of pure copper melt by ultrasonic cavitation Jun-Wen Li Dalian Jiao-Tong Univ. - Manufacturing of Al alloy closed cell foams using shell as foaming poster133 Jun-Wen Li Dalian Jiao-Tong Univ. 215 agent poster134 Effect of long-period stacking ordered phase on hot tearing Ye Zhou Shenyang University of Technology 214 susceptibility of Mg-Zn-xY alloys Oxidation behaviors and self-healing performance of MoSiAlY coating poster135 Yi Xu Changshu Institute of Technology 153 on γ-TiAl substrate by a surface alloying method The relationship between the hardenability and toughness of the poster136 Wu Binbin University of Science and Technology, Beijing - boron-steel with multiple quenching poster137 First-principles calculations and narrow band gap energy of WO3/TiO2 Lin Chen Beijing Radiation Center 369 composite films on titanium prepared by microarc oxidation poster138 Different effect of annealing on the microstructure of supersaturated Xiaoxue Huang Henan University of Science & Technology 621 Cu-Cr alloy film and bulk Collaborative Innovation Center of Steel poster139 Precipitation behavior of Nb in high temperature ferrite Qiannan Liu Technology, University of Science and 42 Technology Beijing University of Science and Technology Beijing, poster140 Jingliang Wang - First-principles study of grain boundary segregation in steels China Collaborative Innovation Center of Steel poster141 Investigation on fracture toughness of coarse grained heat affected Xuelin Wang Technology,University of Science and Technology - zone (cghaz) from the aspect of crystallographic structure Beijing,CHINA National Key Laboratory for Precision Hot Processing of Metals, School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China. poster142 Surface grain nanocrystallization of Fe-Cr-Ni alloy steel by plasma Ruiliang Liu 111 thermo-chemical treatment Key Laboratory of Superlight Material and Surface Technology of Ministry of Education, College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China. poster143 Microstructural study of ODS alloy with hafnium and yttrium addition Yina Huang Hefei University of Technology - poster144 Residual stress evolution and distortion responds of 2024 Al alloy plate Chen-Xing Li Harbin Institute of Technology - Microstructure and mechanical properties of Al/W-B-Al/Al laminar poster145 Ruifeng Liu Taiyuan University of Technology - shielding composites prepared by SPS Surface Modification of Tools by Application of Tungsten Compounds poster146 L.G. Petrova MADI, Moscow Coatings in High-Frequency Discharge - 38 -