DOCSLIB.ORG

The Fiber Year 2009/10 a World Survey on Textile and Nonwovens Industry Dear Readers

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
The Fiber Year 2009/10 a World Survey on Textile and Nonwovens Industry Dear Readers Issue 10 – May 2010 The Fiber Year 2009/10 A World Survey on Textile and Nonwovens Industry Dear Readers, After an historic downturn trend in the textile industry never experienced before, along with the global recession, we are now confidently looking forward to the near future. To start with, the manmade fibres plant markets picked up considerably in the second half of 2009. The economic stimulus packages started to kick in, most importantly in our Asian market where the effect released investment for the future. In addition, Oerlikon Textile was already registering an increase in demand for our high-tech components during this period. This clear trend signalled that spinning mills around the globe are cranking up their production to meet an ever increasing demand. By the end of 2009, this positive trend also extended into other areas of technology offered by Oerlikon Textile. This upturn helped Oerlikon to record a marked increase in orders for systems from staple fibre yarn Thomas Babacan to BCF carpet yarn by the start of 2010. CEO Oerlikon Textile and Chief Operating Officer, We have made good use of the difficult global economic downturn that hit us all hard but has OC Oerlikon Management left us best placed to emerge re-invigorated from the crisis. We have maintained our investment AG, Pfäffikon/Switzerland in research and development that compares with the steady level seen through the boom year of 2007 and in some cases Oerlikon Textile has even managed to increase it. We will present the results of our commitments by innovating successively to the market in 2010 and 2011 through new, highly efficient products that we will launch. We are convinced that with Oerlikon Textile’s leading innovations we have been able to anticipate the needs of our customers much better than we ever did in the past. We want to inspire all our customers to achieve another substantial increase in added value for their own companies as well as contributing to the protection of the environment. Through investing in new technologies, the new developments are subject to the e-save energy efficiency programme, by ensuring a significant reduction in energy consumption compared with rival machines and preceding models. Oelikon’s path has been set for the future. You can continue to rely on Oerlikon Textile and its five business units Oerlikon Barmag, Oerlikon Neumag, Oerlikon Saurer, Oerlikon Schlafhorst and Oerlikon Textile Components as a responsible, dependable, innovative and forward looking partner to the textile industry. Yours sincerely, Thomas Babacan CEO Oerlikon Textile and Chief Operating Officer, OC Oerlikon Management AG, Pfäffikon/Switzerland Foreword The information in this report is mainly based on the global network and in-house experience. Special thanks go to all companies and institutions below mentioned for their precious contribution. ABRAFAS International Federation of Organic Agriculture Movements Airbus S.A.S. International Wool Textile Organisation (IWTO) All Pakistan Textile Mills Association (Punjab Zone) Japan Chemical Fibers Association Asian Development Bank Lenzing AG Association of the Nonwoven Fabrics Industry Malaysia Trade and Industry Portal Autoliv Inc. Malaysian Textile Manufacturers Association Bangladesh Garments Manufacturers and Exporters Ass. Mexican Clothing Industry (CNIV) Bangladesh Textile Mills Association Ministry of Economic Affairs, R.O.C. Bank of Thailand Ministry of Textiles (India) Better Factories Cambodia Ministry of Economy, Trade an Industry (Japan) Boeing Co. National Bureau of Statistics of China Brazilian Textile and Apparel Industry Ass. (ABIT) National Council of Textile Organizations (NCTO) Camara Industrial Argentina de la Indumentaria National Society of Industries (SNI) Central Bank of the Republic of Turkey OPEC China Chemical Fibers Association Organic Exchange China Chemical Fiber Economic Information Network Polyamide High Performance GmbH China Cotton Textile Association Polyester High Performance GmbH China Nonwovens & Industrial Textiles Association Proexport Colombia China Textile Information Center Spinners & Weavers Association of Korea Dralon GmbH State Committee of the Republic of Uzbekistan EDANA Taiwan Textile Research Institute Federal Bureau of Statistics (Pakistan) The World Bank Group Fiber Economics Bureau Trevira GmbH Food and Agriculture Organization of the United Nations Turkey State Institute of Statistics General Aviation Manufacturers Association Turkish Clothing Manufacturers Association German Association of the Automotive Industry (VDA) United Nations Conference on Trade and Development Global Organic Textile Standard (GOTS) United States Agency for International Development Global Wind Energy Council United States Department of Agriculture Hexcel Corp. United States Department of Commerce INDA U.S. Census Bureau Indonesian Synthetic Fiber Makers Association Vietnam Textile Association (Vitas) International Cotton Advisory Committee (ICAC) World Trade Organization © OC Oerlikon Corporation AG, Pfäffikon 2010 The content of this report is protected by copyright. Oerlikon permits recipients of this report to make copies of Oerlikon’s copyright material in this report for their own use. Further distribution and/or publication is permitted provided that the source is acknowledged and no changes to the content are made. However, Oerlikon reserves the right to withdraw any of these permissions in relation to any particular user at any time. The information provided in this report has been investigated and compiled with reasonable care. However, the information is provided “as is” without warranties of any kind, expressed or implied, including accuracy, timeliness and completeness. The Fiber Year 2009 / 10 03 Table of contents 1. Fiber Year 2009/10 celebrates tenth anniversary ............................................................05 2. World Economic Outlook 2010/2011 ..................................................................................09 3. Raw Material Industry ..........................................................................................................012 3.1 Cotton .....................................................................................................................................012 3.2 Wool .........................................................................................................................................016 3.3 Crude Oil ................................................................................................................................019 4. Fiber Consumption in 2009 ................................................................................................021 5. Manmade Filament Yarn and Staple Fibers .....................................................................023 5.1 Polyester ................................................................................................................................025 5.2 Polyamide ...............................................................................................................................029 5.3 Polypropylene ........................................................................................................................033 5.4 Acrylic .....................................................................................................................................034 5.5 Cellulosics ..............................................................................................................................035 5.6 Carbon Fibers ........................................................................................................................038 5.7 Aramids ...................................................................................................................................040 5.8 Spandex Yarns .......................................................................................................................041 6. Spun Yarn ...............................................................................................................................042 7. Organic Textiles ....................................................................................................................078 8. Nonwovens and Other Unspun End-Uses ........................................................................083 9. Statistical Appendix .............................................................................................................088 “The Fiber Year 2009/10” is the tenth issue to describe in detail developments in the world’s manmade fiber, spun yarn and nonwovens industry. Its target is to provide a comprehensive picture on the textile industry. Statistical information is instrumental in achieving an overall impression and inevitable to disclose the story behind the figures. However, it cannot explain the fundamental changes that have been taking place, as politics explain much activity in this industry today and have consequences far beyond the boundaries of the industry. For further information: Andreas Engelhardt Oerlikon Saurer Arbon Ltd. Textilstrasse 2 CH-9320 Arbon Tel. +41 - 71 - 447 51 89; Cell. +41 79 571 34 33 [email protected] or [email protected] 04 The Fiber Year 2009/ 10 1. Fiber Year 2009/10 celebrates tenth anniversary The report “The Fiber Year” is the next generation of a service that the Dutch manmade fiber manufacturer Akzo had provided for more than three decades. It started under the umbrella of Saurer AG. Since 2007,
Load more

Recommended publications
  • Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing
    machines Article Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing Flaviana Calignano 1,* , Massimo Lorusso 2 , Ignanio Roppolo 3 and Paolo Minetola 1 1 Department of Management and Production Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin, Italy; [email protected] 2 Istituto Italiano di Tecnologia, Center for Sustainable Future Technologies IIT@Polito, Corso Trento 21, 10129 Turin, Italy; [email protected] 3 Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Turin, Italy; [email protected] * Correspondence: fl[email protected]; Tel.: +39-011-090-7218 Received: 19 July 2020; Accepted: 2 September 2020; Published: 4 September 2020 Abstract: Additive manufacturing (i.e., 3D printing) has rapidly developed in recent years. In the recent past, many researchers have highlighted the development of in-house filaments for fused filament fabrication (FFF), which can extend the corresponding field of application. Due to the limited mechanical properties and deficient functionality of printed polymer parts, there is a need to develop printable polymer composites that exhibit high performance. This study analyses the actual mechanical characteristics of parts fabricated with a low-cost printer from a carbon fibre-reinforced nylon filament. The results show that the obtained values differ considerably from the values presented in the datasheets of various filament suppliers. Moreover, the hardness and tensile strength are influenced by the building direction, the infill percentage, and the thermal stresses, whereas the resilience is affected only by the building direction. Furthermore, the relationship between the mechanical properties and the filling factor is not linear.
    [Show full text]
  • Textiles and Apparel Industry- Global Scenario
    Textiles and Apparel Textiles and Apparel Industry- Global Scenario Vendor Development and Investor Summit 2017- Textile and Apparel Sector Profile Global Overview Global Apparel Market Size (US$ Bn) 600 14 510 500 12 12 10 400 350 10 315 8 300 237 6 200 5 4 4 ► Global apparel market worth US$ 1.7 trillion, 93 CAGR (in %) US$ US$ (Trillions) 59 56 3 100 2 40 25 2 2 as on 2015. 1 1 0 0 ► Constitutes 2% of the World’s GDP ► EU, USA & China are among largest apparel market with combined share of 54% (2015). Regions ► Top 8 apparel consuming nations form 2015 Projected CAGR (%) dominating share of 70% of the global apparel market size Foreign Direct Investments (FDI) in the sector ► Global apparel market expected to reach US$ 2.6 trillion in 2025 growing by a ► Global FDI stood at US$ 1.2 Trillion in 2014 projected rate of 4% with 2015 as base year. ► After China, India is a emerging apparel market adding around US$ 121 Billion by 2025. The Textile and Clothing Manufacturing Chain Finished Yarn •Weaving/ Product Knitting •Natural •Ginning •Bleaching •Clothing •Man made •Carding •Dyeing •Home •Combing •Finishing Furnishings •Spinning •Industry •Dyeing Fibres Fabric The Clothing Value Chain Outbound Logistics Inbound Manufacturin Packaging Marketing/ R&D Design Retailing Logistics g and Branding Warehousing Delivery Source: InfoDev.org (2008), The Global Textile and Garments Industry: The Role of Information and Communication Technologies (ICTs) in Exploiting the Value Chain Vendor Development and Investor Summit 2017- Textile and Apparel Sector
    [Show full text]
  • Annual Report 2019-20
    MINISTRY OF TEXTILES ANNUAL REPORT 2019-20 MINISTRY OF TEXTILES ANNUAL REPORT 2019-20 INDEX 1 OVERVIEW 1 2 FUNCTIONS & ORGANISATIONAL SET-UP 9 3 EXPORT PROMOTION 27 4 RAW MATERIAL SUPPORT 30 5 SUPPORT FOR TECHNOLOGY UP-GRADATION 54 6 SUPPORT FOR TRAINING AND CAPACITY BUILDING 59 7 SUPPORT FOR INFRASTRUCTURE 76 8 RESEARCH & DEVELOPMENT IN TEXTILE SECTOR 78 9 TECHNICAL TEXTILES 81 10 SECTORAL SCHEME 86 11 TEXTILE PROMOTION IN NORTH EASTERN REGION 124 12 ICT INITIATIVES IN TEXTILES 131 13 RAJBHASHA 133 14 WELFARE MEASURES FOR SC/ST/WOMEN AND PERSONS WITH DISABILITY: 135 15 VIGILANCE ACTIVITIES 138 MINISTRY OF TEXTILES OVERVIEW 1.1 The Indian textile industry is one of the largest in the world 1.3 Raw Material Support with a large unmatched raw material base and manufacturing strength across the value chain. It is the 2nd largest manufacturer a. Cotton: and exporter in the world, after China. The share of textile and clothing Cotton is one of the most important cash crops and accounts for in India’s total exports stands at a significant 12 % (2018-19). India around 25% of the total global fibre production. In the raw material has a share of 5 % of the global trade in textiles and apparel. The consumption basket of the Indian textile industry, the proportion of uniqueness of the industry lies in its strength both in the hand-woven cotton is around 60%. The consumption of cotton is more than sector as well as in the capital intensive mill sector. The mill sector 300 lakh bales (170 kg each) per year.
    [Show full text]
  • Natural Fibers and Fiber-Based Materials in Biorefineries
    Natural Fibers and Fiber-based Materials in Biorefineries Status Report 2018 This report was issued on behalf of IEA Bioenergy Task 42. It provides an overview of various fiber sources, their properties and their relevance in biorefineries. Their status in the scientific literature and market aspects are discussed. The report provides information for a broader audience about opportunities to sustainably add value to biorefineries by considerin g fiber applications as possible alternatives to other usage paths. IEA Bioenergy Task 42: December 2018 Natural Fibers and Fiber-based Materials in Biorefineries Status Report 2018 Report prepared by Julia Wenger, Tobias Stern, Josef-Peter Schöggl (University of Graz), René van Ree (Wageningen Food and Bio-based Research), Ugo De Corato, Isabella De Bari (ENEA), Geoff Bell (Microbiogen Australia Pty Ltd.), Heinz Stichnothe (Thünen Institute) With input from Jan van Dam, Martien van den Oever (Wageningen Food and Bio-based Research), Julia Graf (University of Graz), Henning Jørgensen (University of Copenhagen), Karin Fackler (Lenzing AG), Nicoletta Ravasio (CNR-ISTM), Michael Mandl (tbw research GesmbH), Borislava Kostova (formerly: U.S. Department of Energy) and many NTLs of IEA Bioenergy Task 42 in various discussions Disclaimer Whilst the information in this publication is derived from reliable sources, and reasonable care has been taken in its compilation, IEA Bioenergy, its Task42 Biorefinery and the authors of the publication cannot make any representation of warranty, expressed or implied, regarding the verity, accuracy, adequacy, or completeness of the information contained herein. IEA Bioenergy, its Task42 Biorefinery and the authors do not accept any liability towards the readers and users of the publication for any inaccuracy, error, or omission, regardless of the cause, or any damages resulting therefrom.
    [Show full text]
  • 2016 Top Markets Report Technical Textiles
    2016 Top Markets Report Technical Textiles A Market Assessment Tool for U.S. Exporters May 2016 U.S. Department of Commerce | International Trade Administration | Industry & Analysis (I&A) Industry & Analysis’ (I&A) staff of industry, trade and economic analysts devise and implement international trade, investment, and export promotion strategies that strengthen the global competitiveness of U.S. industries. These initiatives unlock export, and investment opportunities for U.S. businesses by combining in-depth quantitative and qualitative analysis with ITA’s industry relationships. For more information, visit www.trade.gov/industry I&A is part of the International Trade Administration, whose mission is to create prosperity by strengthening the competitiveness of U.S. industry, promoting trade and investment, and ensuring fair trade and compliance with trade laws and agreements. Robert Carrigg and Rachel Alarid served as lead authors on this report. A special thanks goes to the many commercial specialists that reviewed early drafts and provided thoughtful insights and support. Table of Contents Executive Summary ............................................................................................................................... 2 Overview and Key Findings ................................................................................................................ 5 Country Case Studies Brazil ...........................................................................................................................................................
    [Show full text]
  • (Results-Framework Document) for Ministry of Textiles
    Government of India R F D (Results-Framework Document) for Ministry of Textiles (2013-2014) Generated on 07/01/2014 12.20 PM Results-Framework Document (RFD) for Ministry of Textiles-(2013-2014) Section 1: Vision, Mission, Objectives and Functions Vision To create a modern, vibrant, integrated and world-class textiles sector including handlooms and handicrafts to produce cost efficient and high quality textiles, apparels and handicrafts for domestic and export sectors. Mission To promote planned and harmonious growth of textiles by making available adequate fibres to all sectors so as to avhieve a CAGR of 11.5 % in Textiles & Apparel production; to promote technological up-gradation for all types of textiles including technical textiles, jute, silk and wool; to promote skills of all textile workers, handloom weavers and handicrafts artisans,with a target of imparting training to 26.75 lakh persons in 5 years; to ensure proper working environment and easy access to health care facilities and insurance cover to weavers and artisans to achieve better quality of life; to promote exports of all types of textiles and handicrafts so as to achieve annual average growth rate of 15 % in exports and to increase India's share of world exports of textile & apparels. Objectives 1 To achieve sustainable growth, modernization, value addition, increase in exports and overall development of the Textiles sector in the country. 2 To ensure integrated development and promotion of Jute sector. 3 To promote growth, development and exports in Sericulture & Silk sector. 4 To develop and modernize the decentralized Powerlooms sector. 5 To develop Handicrafts Sector, increase handicraft exports and welfare of artisans 6 To develop Handlooms sector, increase handloom exports and welfare of weavers 7 To develop Wool & Woollen textiles sector and increase in exports of woollen products 8 To strengthen textiles and Fashion Education.
    [Show full text]
  • Day 2: 14Th February, 2015
    Global Textile Congress, Bangkok, 13-15 Feb 2015 Nurturing Global Citizen Leaders Groomed In Business Design Thinking Prof. Samir Karkhanis Welingkar Institute of Management Development and Research, WeSchool, Mumbai-400019, India. <[email protected]> "The illiterate of this century will not be those who cannot read and write, but those who cannot learn, unlearn, and relearn." - Alvin Toffler It's a VUCA world where the time-tested formulas for success in the corporate world are fast-changing (Bennett & Lemoine, 2014). Environmental degradation (WWF, 2010), the economic breakdown (IMF, 2011), as well as the crippling social order (Welford, 2013) are issues which have collectively raised an alarming call in all spheres of corporate activity. Concepts such as globalization, triple bottom line, more for less for more, disruptive innovation, sustainability, technological revolution, social responsibility, ethical governance and so on are defining the rising trend for inclusive growth and holistic development for not just the business but also for all its stakeholders across the value chain. demanding clients and unpredictable socio-economic-political situations demands competent business leaders to look within, look around and look beyond while being tomorrow-ready today. While on one hand, the corporate leaders of today will need to have extreme local sensitivity and take cognizance of the impact of their actions on the stakeholders, on the other hand they will also need to have a global mindset encouraging innovation and design thinking to succeed in an open and dynamic changing corporate environment. The leaders of tomorrow will have to possess innovative mindsets that look beyond the obvious, creati -of- the- organization and the society.
    [Show full text]
  • All About Fibers
    RawRaw MaterialsMaterials ¾ More than half the mix is silica sand, the basic building block of any glass. ¾ Other ingredients are borates and trace amounts of specialty chemicals. Return © 2003, P. Joyce BatchBatch HouseHouse && FurnaceFurnace ¾ The materials are blended together in a bulk quantity, called the "batch." ¾ The blended mix is then fed into the furnace or "tank." ¾ The temperature is so high that the sand and other ingredients dissolve into molten glass. Return © 2003, P. Joyce BushingsBushings ¾The molten glass flows to numerous high heat-resistant platinum trays which have thousands of small, precisely drilled tubular openings, called "bushings." Return © 2003, P. Joyce FilamentsFilaments ¾This thin stream of molten glass is pulled and attenuated (drawn down) to a precise diameter, then quenched or cooled by air and water to fix this diameter and create a filament. Return © 2003, P. Joyce SizingSizing ¾The hair-like filaments are coated with an aqueous chemical mixture called a "sizing," which serves two main purposes: 1) protecting the filaments from each other during processing and handling, and 2) ensuring good adhesion of the glass fiber to the resin. Return © 2003, P. Joyce WindersWinders ¾ In most cases, the strand is wound onto high-speed winders which collect the continuous fiber glass into balls or "doffs.“ Single end roving ¾ Most of these packages are shipped directly to customers for such processes as pultrusion and filament winding. ¾ Doffs are heated in an oven to dry the chemical sizing. Return © 2003, P. Joyce IntermediateIntermediate PackagePackage ¾ In one type of winding operation, strands are collected into an "intermediate" package that is further processed in one of several ways.
    [Show full text]
  • Carbon Fiber Supply and Demand
    Carbon Fiber Supply and Demand Supply of PAN based carbon fiber New players could make all the difference San Diego, California, USA October 23 2007 The ongoing shortage of PAN based carbon fibers has seen the planning, development and realization of new carbon fiber manufacturing capacity in new countries. The start up of new plant faces many hurdles, especially in the face of competition that has been in the business for many decades. However these hurdles have been overcome and this process will enable carbon fiber to become truly a commodity product, available to the vast range of current and new composite applications. Latest News (Press releases in the last 4 weeks) Supply October 11, 2007 Capacity Expansion of Carbon Fiber “TENAX®” Toho Tenax Co., Ltd. (Head Office: Bunkyo-ku, Tokyo, President: Yoshikuni Utsunomiya), which is engaged in the business of carbon fibers within the Teijin Group, has decided to add a new carbon fiber production line at Toho Tenax Europe GmbH (located at Wuppertal, Germany. October 05, 2007 SGL Group plans to triple carbon fiber capacities SGL Group plans to triple carbon fiber capacities Capacity increase up to 12,000 metric tons by 2012 Demand September 27, 2007 British Airways Green light for aircraft orders British Airways has today placed an order for 12 Airbus A380 and 24 Boeing 787 aircraft with options for a further seven Airbus A380s and18 Boeing 787s. The British Airways Order The new aircraft will replace 34 of the airline's long haul fleet and will be delivered between 2010 and 2014. The order, including options, will give the airline the ability to grow its capacity by up to four per cent per year and the flexibility to tailor its future capacity growth in line with market conditions.
    [Show full text]
  • Natural Fiber Composites for Space Applications
    Natural fiber composites for space applications Clean Space industrial days, 25.10.2017 Julien Rion, CTO Bcomp Ltd 1700 Fribourg Switzerland ABOUT BCOMP . Founded 2011, 12 Employees . Several innovation- and start-up awards, including Swiss Economic Award 2016 . Broad customer basis in Sports & Leisure and Luxury industries (e.g. K2, Black Diamond, Nordica, Stöckli, Starboard) . Lightweighting development projects with leading Automotive OEMs . International academic/research network 07.11.2017 2 OUR VALUE PROPOSITION We deliver lightweight, high-performance materials in a renewable package . Weight reduction of up to 40% . Material cost reduction of up to 30% Flax fibres Structural part Bcomp reinforcement 07.11.2017 3 BCOMP PRODUCT PORTFOLIO bCores® ampliTex® powerRibs Services 07.11.2017 4 Why using natural fibers? . High specific stiffness . Good vibration damping properties . Probably demisable . Radio-transparent . Sustainable fibers State of the art for space applications Are natural fibers applicable for space? . Tensiles tests between -50 and 150°C . DMA tests from -150°C to 150°C . TMA tests . Outgasing tests . Moisture tests Tensile tests . High specific stiffness at low temperature . Bilinear behaviour . Loss of stiffness with temperature increase Stiffness 48 12 E1 44 11 E2 40 ET 10 36 9 32 8 28 7 24 6 20 5 16 4 [GPa] ET E1 , E2 [GPa] E1 , 12 3 8 2 4 1 0 0 -100 -50 0 50 100 150 200 T [°C] DMA tests Test on L specimens: . Constant decrease of E with T increase . Damping quite constant DMA tests 80 E-modulus: 70 . Constant decrease of E 60 with T increase 50 40 .
    [Show full text]
  • Basic of Textiles
    BASIC OF TEXTILES BFA(F) 202 CC 5 Directorate of Distance Education SWAMI VIVEKANAND SUBHARTI UNIVERSITY MEERUT 250005 UTTAR PRADESH SIM MOUDLE DEVELOPED BY: Reviewed by the study Material Assessment Committed Comprising: 1. Dr. N.K.Ahuja, Vice Chancellor Copyright © Publishers Grid No part of this publication which is material protected by this copyright notice may be reproduce or transmitted or utilized or store in any form or by any means now know or here in after invented, electronic, digital or mechanical. Including, photocopying, scanning, recording or by any informa- tion storage or retrieval system, without prior permission from the publisher. Information contained in this book has been published by Publishers Grid and Publishers. and has been obtained by its author from sources believed to be reliable and are correct to the best of their knowledge. However, the publisher and author shall in no event be liable for any errors, omission or damages arising out of this information and specially disclaim and implied warranties or merchantability or fitness for any particular use. Published by: Publishers Grid 4857/24, Ansari Road, Darya ganj, New Delhi-110002. Tel: 9899459633, 7982859204 E-mail: [email protected], [email protected] Printed by: A3 Digital Press Edition : 2021 CONTENTS 1. Fiber Study 5-64 2. Fiber and its Classification 65-175 3. Yarn and its Types 176-213 4. Fabric Manufacturing Techniques 214-260 5. Knitted 261-302 UNIT Fiber Study 1 NOTES FIBER STUDY STRUCTURE 1.1 Learning Objective 1.2 Introduction 1.3 Monomer, Polymer, Degree of polymerization 1.4 Student Activity 1.5 Properties of Fiber: Primary & Secondary 1.6 Summary 1.7 Glossary 1.8 Review Questions 1.1 LEARNING OBJECTIVE After studying this unit you should be able to: ● Describe the Natural Fiber.
    [Show full text]
  • Technical Textile Tools Report
    TECHNICAL TEXTILE TOOLS REPORT GENERAL INTRODUCTION EVA ANDERSSON STRAND AND MARIE-LOUISE NOSCH Tools and Textiles – Texts and Contexts research program The Danish National Research Foundation’s Centre for Textile Research (CTR) University of Copenhagen PREFACE We thank you for your cooperation in the first part of the Tools and Textiles – Texts and Contexts (TTTC) research programme and we look forward to your reactions to our tool analysis and the technical report. A synthesis of all technical reports will be published in 2012 (Andersson, E. and Nosch, M-L. Tools, Textiles, and Contexts, Oxbow Books, Oxford). This technical report is written for you. It forms the basis of your context description which we look forward to receiving. In future research, you are most welcome to use the results of the report in other publications and articles about your site and textile production. Please remember to quote the Danish National Research Foundation’s Centre for Textile Research. Copenhagen Eva B Andersson and Marie-Louise Nosch 2 INTRODUCTION One of the main objectives of the TTTC research program has been to record as many textile tools from as many types of sites as possible within our target area and date: The Eastern Mediterranean in the Bronze Age. The majority of the registered tools are spindle whorls and loom weights, but other tools such as needles, shuttles, and spinning bowls have been recorded (a category termed ‘uncertain’ has been reserved for possible or unidentified textile tools). The initial goal was to create a database to gather information on such diverse topics as textile tools in the neo-palatial and post-palatial periods, changes in loom weight shapes at a specific site, spindle whorls from different contexts in a particular period, and so on.
    [Show full text]